RADLAN-SMARTPORTS-MIB
AI MIB Summary
The RADLAN-SMARTPORTS-MIB enables management of RAD (Ruckus/CommScope) switch port configurations by exposing macros that apply predefined or user-defined command sets to individual interfaces, trunks, or global contexts. This module facilitates the monitoring and retrieval of applied macro databases per interface to ensure consistent policy enforcement across network ports.
The private MIB module definition for Smart Ports - provide a convenient way to save and share common configurations. Smart Ports group a group of command to be applied on a port or a trunk OR on a global configuration context. In addition Smart port application provide a database per interface (or global configuration) to list applied macros. Each smart port macro can either a user-defined or pre-defined.
Main OID:
rlSmartPorts.1.3.6.1.4.1.89.140
25
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
rlSmartPortsThe private MIB module definition for Smart Ports -
provide a convenient way to save and share common configurations.
Smart Ports group a group of command to be applied on a port or a trunk
OR on a global configuration context. In addition Smart port
application provide a database per interface (or global configuration)
to list applied macros.
Each smart port macro can either a user-defined or pre-defined. MODULE-IDENTITY .1.3.6.1.4.1.89.140 |
SNMPv2-TCThe private MIB module definition for Smart Ports -
provide a convenient way to save and share common configurations.
Smart Ports group a group of command to be applied on a port or a trunk
OR on a global configuration context. In addition Smart port
application provide a database per interface (or global configuration)
to list applied macros.
Each smart port macro can either a user-defined or pre-defined. Unknown .1.3.6.1.4.1.89.140 |
rlSmartPortsMacroManageTableThe table listing available smart ports macros,
holding:
macro name
macro type: user defined,
Marvell provided per interface
Marvell provided globally
and matches a macro index to be used as identifier in
rlSmartPortsMacroContentTable where the macro content really IS
Allow to add/remove user defined macros. SEQUENCE OF RlSmartPortsMacroManageEntry .1.3.6.1.4.1.89.140.1 |
rlSmartPortsMacroManageEntryAn entry in the rlSmartPortsMacroManageTable. RlSmartPortsMacroManageEntry .1.3.6.1.4.1.89.140.1.1 |
rlSmartPortsMacroNameMacro name. RlSmartPortsMacroName .1.3.6.1.4.1.89.140.1.1.1 |
rlSmartPortsMacroIndexThis variable identifies the macro's index.
An arbitrary incremental Index used as identifier in
rlSmartPortsMacroContentTable where the macro content really IS.rw INTEGER .1.3.6.1.4.1.89.140.1.1.2 |
rlSmartPortsMacroTypeThis variable identifies the macro type: user defined,
Marvell provided per interface
Marvell provided globallyro MacroType .1.3.6.1.4.1.89.140.1.1.3 |
rlSmartPortsMacroStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.140.1.1.4 |
rlSmartPortsMacroKeywordsList of Macro Keywords. if there arero DisplayString .1.3.6.1.4.1.89.140.1.1.5 |
rlSmartPortsMacroDesc1List of Macro descriptions. if there arero DisplayString .1.3.6.1.4.1.89.140.1.1.6 |
rlSmartPortsMacroDesc2continue List of Macro descriptions. if there arero DisplayString .1.3.6.1.4.1.89.140.1.1.7 |
rlSmartPortsMacroContentTableThe table holds smart ports macro's content.
Entries are allowed to be added ONLY on macro indexes that
1) has a corresponding entry in rlSmartPortsMacroManageTable
2) has rlSmartPortsMacroType = rlSmartPortsMacroUserCreated SEQUENCE OF RlSmartPortsMacroContentEntry .1.3.6.1.4.1.89.140.2 |
rlSmartPortsMacroContentEntryAn entry in the elSmartPortsMacroManageTable. RlSmartPortsMacroContentEntry .1.3.6.1.4.1.89.140.2.1 |
rlSmartPortsMacroOctetIndexThis variable identifies the line number in the macro's content text.
To allow full macro size of 3k = 19 * 160 = 3040 INTEGER .1.3.6.1.4.1.89.140.2.1.1 |
rlSmartPortsMacroTextMacro content.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.89.140.2.1.2 |
rlSmartPortsMacroDescriptionTableThe table holds smart ports macro's name
globally (rlSmartPortsMacroDescriptionIndex == 0)
interface (port or trunk). SEQUENCE OF RlSmartPortsMacroDescriptionEntry .1.3.6.1.4.1.89.140.3 |
rlSmartPortsMacroDescriptionEntryAn entry in the rlSmartPortsMacroInterfaceTable. RlSmartPortsMacroDescriptionEntry .1.3.6.1.4.1.89.140.3.1 |
rlSmartPortsMacroDescriptionIndexThis variable identifies global configuration when equals 0 OR
local port or trunk on which the user saved Macro's name. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.89.140.3.1.1 |
rlSmartPortsMacroDescriptionTextMacro name.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.89.140.3.1.2 |
rlSmartPortsMacroDescriptionStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.140.3.1.3 |
rlSmartPortsFreeIndexesReturns free index to set in rlSmartPortsMacroIndex when macro is added.ro INTEGER .1.3.6.1.4.1.89.140.4 |
rlSmartPortsDiagMacroNameIn case the last macro had failed you will get this name from the
specific terminal you had used .ro DisplayString .1.3.6.1.4.1.89.140.5 |
rlSmartPortsDiagLineNumberIn case the last macro had failed you will get i'ts line number from
specific terminal you had used .ro INTEGER .1.3.6.1.4.1.89.140.6 |
rlSmartPortsDiagCommandLineIn case the last macro had failed you will get i'ts command line number
from specific terminal you had used .ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.89.140.7 |
rlSmartPortsCondenseModedisabled - in macro description macro such as x no_x will be removed
enabled - in macro description macro such as x no_x will not be removed
when condense mode is enabled (by default) each time a macro with the name
no_x is applied and prior to that a macro x was applied , they will be removed
from the list...rw Enumeration .1.3.6.1.4.1.89.140.8 |