RADLAN-OSPFV3-LSDB-MIB
AI MIB Summary
The RADLAN-OSPFV3-LSDB-MIB enables monitoring of the OSPFv3 Link-State Database (LSDB) contents and LSA entries on RADLAN network devices. It facilitates the retrieval of specific LSA types, sequence numbers, and flooding status to verify topology synchronization and detect routing inconsistencies.
The private MIB module definition for OSPF LSA Database MIB.
Main OID:
rlOspfv3Lsdb.1.3.6.1.4.1.89.222
124
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
124 total| Object Name |
|---|
rlOspfv3LsdbThe private MIB module definition for OSPF LSA Database MIB. MODULE-IDENTITY .1.3.6.1.4.1.89.222 |
rlOspfv3RouterLsaTableRouter Link State Advertisement. SEQUENCE OF RlOspfv3RouterLsaEntry .1.3.6.1.4.1.89.222.1 |
rlOspfv3RouterLsaEntryA single entry from Router LSA. RlOspfv3RouterLsaEntry .1.3.6.1.4.1.89.222.1.1 |
rlOspfv3RouterLsaProcessIdA 32-bit integer uniquely identifying an OSPFv3 process.ro RlOspfProcessID (RADLAN-OSPF-MIB) .1.3.6.1.4.1.89.222.1.1.1 |
rlOspfv3RouterLsaAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.89.222.1.1.2 |
rlOspfv3RouterLsaLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.89.222.1.1.3 |
rlOspfv3RouterLsaRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.89.222.1.1.4 |
rlOspfv3RouterLsaIdxThe index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries.ro Unsigned32 (1.. 65535) .1.3.6.1.4.1.89.222.1.1.5 |
rlOspfv3RouterLsaCountNumber of entries containg is the LSA.ro Unsigned32 (1.. 65535) .1.3.6.1.4.1.89.222.1.1.6 |
rlOspfv3RouterLsaSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.89.222.1.1.7 |
rlOspfv3RouterLsaAgeThis field is the age of the link state
advertisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.89.222.1.1.8 |
rlOspfv3RouterLsaChecksumThis field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.89.222.1.1.9 |
rlOspfv3RouterLsaLengthThe lenth in bytes of the LSA.
This includes the 20 byte LSA header.ro Unsigned32 .1.3.6.1.4.1.89.222.1.1.10 |
rlOspfv3RouterLsaBitWWhen set, the router is a wild-card multicast receiver.
When running MOSPF, these routers receive all multicast datagrams,
regardless of destination.ro Enumeration .1.3.6.1.4.1.89.222.1.1.11 |
rlOspfv3RouterLsaBitVWhen set, the router is an endpoint
of one or more fully adjacent virtual
links having the described area as Transit
area (V is for virtual link endpoint).ro Enumeration .1.3.6.1.4.1.89.222.1.1.12 |
rlOspfv3RouterLsaBitEWhen set, the router is an AS
boundary router (E is for external).ro Enumeration .1.3.6.1.4.1.89.222.1.1.13 |
rlOspfv3RouterLsaBitBWhen set, the router is an area
border router (B is for border).ro Enumeration .1.3.6.1.4.1.89.222.1.1.14 |
rlOspfv3RouterLsaOptionsThe optional capabilities supported by the router.
Through this mechanism routers of differing capabilities can be
mixed within an OSPF routing domain.ro Unsigned32 .1.3.6.1.4.1.89.222.1.1.15 |
rlOspfv3RouterLsaTypeA quick description of the router link.ro Enumeration .1.3.6.1.4.1.89.222.1.1.16 |
rlOspfv3RouterLsaMetricThe cost of using this router link.ro Unsigned32 .1.3.6.1.4.1.89.222.1.1.17 |
rlOspfv3RouterLsaInterfaceIDThe Interface ID assigned to the interface being described.ro Unsigned32 .1.3.6.1.4.1.89.222.1.1.18 |
rlOspfv3RouterLsaNeighborInterfaceIDThe Interface ID the neighbor router (or the attached link's
Designated Router, for Type 2 interfaces) has been advertising
in hello packets sent on the attached link.ro Unsigned32 .1.3.6.1.4.1.89.222.1.1.19 |
rlOspfv3RouterLsaNeighborRouterIDThe Router ID the neighbor router (or the attached link's
Designated Router, for Type 2 interfaces).ro RouterID (OSPF-MIB) .1.3.6.1.4.1.89.222.1.1.20 |
rlOspfv3NetworkLsaTableNetwork Link State Advertisement. SEQUENCE OF RlOspfv3NetworkLsaEntry .1.3.6.1.4.1.89.222.2 |
rlOspfv3NetworkLsaEntryA single entry from Network LSA. RlOspfv3NetworkLsaEntry .1.3.6.1.4.1.89.222.2.1 |
rlOspfv3NetworkLsaProcessIdA 32-bit integer uniquely identifying an OSPFv3 process.ro RlOspfProcessID (RADLAN-OSPF-MIB) .1.3.6.1.4.1.89.222.2.1.1 |
rlOspfv3NetworkLsaAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.89.222.2.1.2 |
rlOspfv3NetworkLsaLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.89.222.2.1.3 |
rlOspfv3NetworkLsaRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.89.222.2.1.4 |
rlOspfv3NetworkLsaIdxThe index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries.ro Unsigned32 (1.. 65535) .1.3.6.1.4.1.89.222.2.1.5 |
rlOspfv3NetworkLsaCountNumber of entries containg is the LSA.ro Unsigned32 (1.. 65535) .1.3.6.1.4.1.89.222.2.1.6 |
rlOspfv3NetworkLsaSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.89.222.2.1.7 |
rlOspfv3NetworkLsaAgeThis field is the age of the link state
advertisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.89.222.2.1.8 |
rlOspfv3NetworkLsaChecksumThis field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.89.222.2.1.9 |
rlOspfv3NetworkLsaLengthThe lenth in bytes of the LSA.
This includes the 20 byte LSA header.ro Unsigned32 .1.3.6.1.4.1.89.222.2.1.10 |
rlOspfv3NetworkLsaOptionsThe optional capabilities supported by the router.
Through this mechanism routers of differing capabilities can be
mixed within an OSPF routing domain.ro Unsigned32 .1.3.6.1.4.1.89.222.2.1.11 |
rlOspfv3NetworkLsaAttRouterThe Router IDs of each of the routers attached
to the link.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.89.222.2.1.12 |
rlOspfv3InterAreaPrefixLsaTableInter Area Prefix Link State Advertisement. SEQUENCE OF RlOspfv3InterAreaPrefixLsaEntry .1.3.6.1.4.1.89.222.3 |
rlOspfv3InterAreaPrefixLsaEntryA single entry from Network LSA. RlOspfv3InterAreaPrefixLsaEntry .1.3.6.1.4.1.89.222.3.1 |
rlOspfv3InterAreaPrefixLsaProcessIdA 32-bit integer uniquely identifying an OSPFv3 process.ro RlOspfProcessID (RADLAN-OSPF-MIB) .1.3.6.1.4.1.89.222.3.1.1 |
rlOspfv3InterAreaPrefixLsaAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.89.222.3.1.2 |
rlOspfv3InterAreaPrefixLsaLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.89.222.3.1.3 |
rlOspfv3InterAreaPrefixLsaRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.89.222.3.1.4 |
rlOspfv3InterAreaPrefixLsaSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.89.222.3.1.5 |
rlOspfv3InterAreaPrefixLsaAgeThis field is the age of the link state
advertisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.89.222.3.1.6 |
rlOspfv3InterAreaPrefixLsaChecksumThis field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.89.222.3.1.7 |
rlOspfv3InterAreaPrefixLsaLengthThe lenth in bytes of the LSA.
This includes the 20 byte LSA header.ro Unsigned32 .1.3.6.1.4.1.89.222.3.1.8 |
rlOspfv3InterAreaPrefixLsaMetricThe cost of this route. Expressed in the same units as the
interface costs in the router-LSAs.ro Unsigned32 .1.3.6.1.4.1.89.222.3.1.9 |
rlOspfv3InterAreaPrefixLsaPrefixLengthIPv6 address prefix length.ro Unsigned32 .1.3.6.1.4.1.89.222.3.1.10 |
rlOspfv3InterAreaPrefixLsaPrefixOptionsIPv6 address prefix options.ro Unsigned32 .1.3.6.1.4.1.89.222.3.1.11 |
rlOspfv3InterAreaPrefixLsaAddressPrefixIPv6 address prefix - bit strings of length 128.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.222.3.1.12 |
rlOspfv3InterAreaRouterLsaTableInter Area Router Link State Advertisement. SEQUENCE OF RlOspfv3InterAreaRouterLsaEntry .1.3.6.1.4.1.89.222.4 |
rlOspfv3InterAreaRouterLsaEntryA single entry from Network LSA. RlOspfv3InterAreaRouterLsaEntry .1.3.6.1.4.1.89.222.4.1 |
rlOspfv3InterAreaRouterLsaProcessIdA 32-bit integer uniquely identifying an OSPFv3 process.ro RlOspfProcessID (RADLAN-OSPF-MIB) .1.3.6.1.4.1.89.222.4.1.1 |
rlOspfv3InterAreaRouterLsaAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.89.222.4.1.2 |
rlOspfv3InterAreaRouterLsaLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.89.222.4.1.3 |
rlOspfv3InterAreaRouterLsaRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.89.222.4.1.4 |
rlOspfv3InterAreaRouterLsaSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.89.222.4.1.5 |
rlOspfv3InterAreaRouterLsaAgeThis field is the age of the link state
advertisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.89.222.4.1.6 |
rlOspfv3InterAreaRouterLsaChecksumThis field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.89.222.4.1.7 |
rlOspfv3InterAreaRouterLsaLengthThe lenth in bytes of the LSA.
This includes the 20 byte LSA header.ro Unsigned32 .1.3.6.1.4.1.89.222.4.1.8 |
rlOspfv3InterAreaRouterLsaOptionsThe optional capabilities supported by the router.
Through this mechanism routers of differing capabilities can be
mixed within an OSPF routing domain.ro Unsigned32 .1.3.6.1.4.1.89.222.4.1.9 |
rlOspfv3InterAreaRouterLsaMetricThe cost of this route. Expressed in the same units as the
interface costs in the router-LSAs.ro Unsigned32 .1.3.6.1.4.1.89.222.4.1.10 |
rlOspfv3InterAreaRouterLsaDestinationRouterIdThe Router ID of the router being described by the LSA.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.89.222.4.1.11 |
rlOspfv3AsExternalLsaTableAS External Link State Advertisement. SEQUENCE OF RlOspfv3AsExternalLsaEntry .1.3.6.1.4.1.89.222.5 |
rlOspfv3AsExternalLsaEntryA single entry from Router LSA. RlOspfv3AsExternalLsaEntry .1.3.6.1.4.1.89.222.5.1 |
rlOspfv3AsExternalLsaProcessIdA 32-bit integer uniquely identifying an OSPFv3 process.ro RlOspfProcessID (RADLAN-OSPF-MIB) .1.3.6.1.4.1.89.222.5.1.1 |
rlOspfv3AsExternalLsaAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.89.222.5.1.2 |
rlOspfv3AsExternalLsaLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.89.222.5.1.3 |
rlOspfv3AsExternalLsaRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.89.222.5.1.4 |
rlOspfv3AsExternalLsaSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.89.222.5.1.5 |
rlOspfv3AsExternalLsaAgeThis field is the age of the link state
advertisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.89.222.5.1.6 |
rlOspfv3AsExternalLsaChecksumThis field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.89.222.5.1.7 |
rlOspfv3AsExternalLsaLengthThe lenth in bytes of the LSA.
This includes the 20 byte LSA header.ro Unsigned32 .1.3.6.1.4.1.89.222.5.1.8 |
rlOspfv3AsExternalLsaBitEThe type of external metric. If bit E is set, the metric
specified is a Type 2 external metric.ro Enumeration .1.3.6.1.4.1.89.222.5.1.9 |
rlOspfv3AsExternalLsaBitFIf set, a Forwarding Address has been included in the LSA.ro Enumeration .1.3.6.1.4.1.89.222.5.1.10 |
rlOspfv3AsExternalLsaBitTIf set, an External Route Tag has been included in the LSA.ro Enumeration .1.3.6.1.4.1.89.222.5.1.11 |
rlOspfv3AsExternalLsaMetricThe cost of this route. Interpretation depends on the external
type indication (bit E above).ro Unsigned32 .1.3.6.1.4.1.89.222.5.1.12 |
rlOspfv3AsExternalLsaReferencedLsTypeIf non-zero, an LSA with this LS type is to be associated with
this LSA (see Referenced Link State ID below).ro Unsigned32 .1.3.6.1.4.1.89.222.5.1.13 |
rlOspfv3AsExternalLsaPrefixLengthIPv6 address prefix length.ro Unsigned32 .1.3.6.1.4.1.89.222.5.1.14 |
rlOspfv3AsExternalLsaPrefixOptionsIPv6 address prefix options.ro Unsigned32 .1.3.6.1.4.1.89.222.5.1.15 |
rlOspfv3AsExternalLsaAddressPrefixIPv6 address prefix - bit strings of length 128.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.222.5.1.16 |
rlOspfv3AsExternalLsaForwardingAddressA fully qualified IPv6 address (128 bits).
Included in the LSA if and only if bit F has been set.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.222.5.1.17 |
rlOspfv3AsExternalLsaExternalRouteTagA 32-bit field which may be used to communicate additional
information between AS boundary routers.ro Unsigned32 .1.3.6.1.4.1.89.222.5.1.18 |
rlOspfv3AsExternalLsaReferencedLinkStateIdIncluded if and only if Reference LS Type is non-zero.ro Unsigned32 .1.3.6.1.4.1.89.222.5.1.19 |
rlOspfv3LinkLsaTableLink (Type 8) Link State Advertisement. SEQUENCE OF RlOspfv3LinkLsaEntry .1.3.6.1.4.1.89.222.6 |
rlOspfv3LinkLsaEntryA single entry from Network LSA. RlOspfv3LinkLsaEntry .1.3.6.1.4.1.89.222.6.1 |
rlOspfv3LinkLsaProcessIdA 32-bit integer uniquely identifying an OSPFv3 process.ro RlOspfProcessID (RADLAN-OSPF-MIB) .1.3.6.1.4.1.89.222.6.1.1 |
rlOspfv3LinkLsaIfIndexThe identifier of the link from which the LSA
was received. Unsigned32 .1.3.6.1.4.1.89.222.6.1.2 |
rlOspfv3LinkLsaIfInstIdOSPFv3 protocol instance ID specified in the OSPF header
of the packet in which this LSA was received. Integer32 .1.3.6.1.4.1.89.222.6.1.3 |
rlOspfv3LinkLsaLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.89.222.6.1.4 |
rlOspfv3LinkLsaRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.89.222.6.1.5 |
rlOspfv3LinkLsaIdxThe index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries.ro Unsigned32 (1.. 65535) .1.3.6.1.4.1.89.222.6.1.6 |
rlOspfv3LinkLsaCountNumber of entries containg is the LSA.ro Unsigned32 (1.. 65535) .1.3.6.1.4.1.89.222.6.1.7 |
rlOspfv3LinkLsaSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.89.222.6.1.8 |
rlOspfv3LinkLsaAgeThis field is the age of the link state
advertisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.89.222.6.1.9 |
rlOspfv3LinkLsaChecksumThis field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.89.222.6.1.10 |
rlOspfv3LinkLsaLengthThe lenth in bytes of the LSA.
This includes the 20 byte LSA header.ro Unsigned32 .1.3.6.1.4.1.89.222.6.1.11 |
rlOspfv3LinkLsaRtrPriThe Router Priority of the interface attaching the originating
router to the link.ro Unsigned32 .1.3.6.1.4.1.89.222.6.1.12 |
rlOspfv3LinkLsaOptionsThe optional capabilities supported by the router.
Through this mechanism routers of differing capabilities can be
mixed within an OSPF routing domain.ro Unsigned32 .1.3.6.1.4.1.89.222.6.1.13 |
rlOspfv3LinkLsaLinkLocalInterfaceAddressLink Local Interface Address.
The originating router's link-local interface address on the link.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.222.6.1.14 |
rlOspfv3LinkLsaPrefixLengthIPv6 address prefix length.ro Unsigned32 .1.3.6.1.4.1.89.222.6.1.15 |
rlOspfv3LinkLsaPrefixOptionsIPv6 address prefix options.ro Unsigned32 .1.3.6.1.4.1.89.222.6.1.16 |
rlOspfv3LinkLsaAddressPrefixIPv6 address prefix - bit strings of length 128.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.222.6.1.17 |
rlOspfv3IntraAreaPrefixLsaTableIntra Area Prefix Link State Advertisement. SEQUENCE OF RlOspfv3IntraAreaPrefixLsaEntry .1.3.6.1.4.1.89.222.7 |
rlOspfv3IntraAreaPrefixLsaEntryA single entry from Network LSA. RlOspfv3IntraAreaPrefixLsaEntry .1.3.6.1.4.1.89.222.7.1 |
rlOspfv3IntraAreaPrefixLsaProcessIdA 32-bit integer uniquely identifying an OSPFv3 process.ro RlOspfProcessID (RADLAN-OSPF-MIB) .1.3.6.1.4.1.89.222.7.1.1 |
rlOspfv3IntraAreaPrefixLsaAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.89.222.7.1.2 |
rlOspfv3IntraAreaPrefixLsaLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.89.222.7.1.3 |
rlOspfv3IntraAreaPrefixLsaRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.89.222.7.1.4 |
rlOspfv3IntraAreaPrefixLsaIdxThe index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries.ro Unsigned32 (1.. 65535) .1.3.6.1.4.1.89.222.7.1.5 |
rlOspfv3IntraAreaPrefixLsaCountNumber of entries containg is the LSA.ro Unsigned32 (1.. 65535) .1.3.6.1.4.1.89.222.7.1.6 |
rlOspfv3IntraAreaPrefixLsaSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.89.222.7.1.7 |
rlOspfv3IntraAreaPrefixLsaAgeThis field is the age of the link state
advertisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.89.222.7.1.8 |
rlOspfv3IntraAreaPrefixLsaChecksumThis field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.89.222.7.1.9 |
rlOspfv3IntraAreaPrefixLsaLengthThe lenth in bytes of the LSA.
This includes the 20 byte LSA header.ro Unsigned32 .1.3.6.1.4.1.89.222.7.1.10 |
rlOspfv3IntraAreaPrefixLsaNumPrefixesNumber of IPv6 address prefixes contained in the LSA.ro Unsigned32 .1.3.6.1.4.1.89.222.7.1.11 |
rlOspfv3IntraAreaPrefixLsaReferenceLsTypeReferenced LS Type:
If the Referenced LS type is 1, the prefixes are associated with a router-LSA.
If Referenced LS type is 2, the prefixes are associated with a network-LSA.ro Unsigned32 .1.3.6.1.4.1.89.222.7.1.12 |
rlOspfv3IntraAreaPrefixLsaReferenceLsIdReferenced Link State ID:
If the prefixes are associated with a router-LSA, the Referenced Link State ID should be 0.
If the prefixes are associated with a network-LSA, the Referenced Link State ID should be
the Interface ID of the link's Designated Router.ro Unsigned32 .1.3.6.1.4.1.89.222.7.1.13 |
rlOspfv3IntraAreaPrefixLsaReferenceAdvRouterReferenced Advertising Router: If the prefixes are associated with a router-LSA,
the Referenced Advertising Router should be the originating router's Router ID.
If the prefixes are associated with a network-LSA,
Referenced Advertising Router should be the Designated Router's Router ID.ro Unsigned32 .1.3.6.1.4.1.89.222.7.1.14 |
rlOspfv3IntraAreaPrefixLsaMetricThe cost of this route. Expressed in the same units as the
interface costs in the router-LSAs.ro Unsigned32 .1.3.6.1.4.1.89.222.7.1.15 |
rlOspfv3IntraAreaPrefixLsaPrefixLengthIPv6 address prefix length.ro Unsigned32 .1.3.6.1.4.1.89.222.7.1.16 |
rlOspfv3IntraAreaPrefixLsaPrefixOptionsIPv6 address prefix options.ro Unsigned32 .1.3.6.1.4.1.89.222.7.1.17 |
rlOspfv3IntraAreaPrefixLsaAddressPrefixIPv6 address prefix - bit strings of length 128.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.222.7.1.18 |