RADLAN-MNGINF-MIB
The RADLAN-MNGINF-MIB module enables vendor-specific monitoring and configuration of management access control policies, including authentication methods, authorized user sessions, and administrative privilege levels on RADLAN network infrastructure. This private MIB facilitates granular enforcement of security boundaries by tracking active management sessions and validating access credentials for device administration.
Imported Objects
Objects
16 total| Object Name |
|---|
rlMngInfThe private MIB module definition for management access control. MODULE-IDENTITY .1.3.6.1.4.1.89.89 |
RADLAN-MIBThe private MIB module definition for management access control. Unknown .1.3.6.1.4.1.89.89 |
rlMngInfMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.89.1 |
rlMngInfEnableThe variable specifies if Management ACL functionality is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.89.2 |
rlMngInfActiveListNameThe currently activated Management ACL namerw DisplayString .1.3.6.1.4.1.89.89.3 |
rlMngInfListTableThe table specifies all defined Access Lists definitions SEQUENCE OF RlMngInfListEntry .1.3.6.1.4.1.89.89.4 |
rlMngInfListEntryRow definition for this table. RlMngInfListEntry .1.3.6.1.4.1.89.89.4.1 |
rlMngInfListNameThe Name of the Access List.ro DisplayString .1.3.6.1.4.1.89.89.4.1.1 |
rlMngInfListPriorityThe Priority value.ro Unsigned32 .1.3.6.1.4.1.89.89.4.1.2 |
rlMngInfListIfIndexThe IfIndex value. The IfIndex can be configured to be 0, which means don't care value.rw Unsigned32 .1.3.6.1.4.1.89.89.4.1.3 |
rlMngInfListIpAddrThe IP address. The IP address can be configured to be 0, which means don't care value.rw IpAddress .1.3.6.1.4.1.89.89.4.1.4 |
rlMngInfListIpNetMaskThe subnet mask associated with the IP address of this entry. The value of the mask is
an IP address with all the network bits set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.89.89.4.1.5 |
rlMngInfListServiceService type. The Service type address can be configured to be 0,
which means any of Telnet, SNMP, HTTP, HTTPS, SSH.rw RlMngInfServiceType .1.3.6.1.4.1.89.89.4.1.6 |
rlMngInfListActionAction type. Can be permit or deny.rw RlMngInfActionType .1.3.6.1.4.1.89.89.4.1.7 |
rlMngInfListRowStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.89.4.1.8 |
rlMngInfAuditingEnableControls whether SysLog messages
should be issued on reject by rulerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.89.5 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.