RADLAN-MIR-MIB
RADLAN-MIR-MIB facilitates the monitoring and management of Multipoint Internet Relay (MIR) traffic statistics and operational states on RADLAN network infrastructure. This private MIB module exposes vendor-specific counters and status variables required to track multicast session performance and relay node health within RAD's proprietary switching environments.
Imported Objects
Objects
22 total| Object Name |
|---|
rlMirThis private MIB module defines MIR private MIBs. MODULE-IDENTITY .1.3.6.1.4.1.89.61 |
RADLAN-MIBThis private MIB module defines MIR private MIBs. Unknown .1.3.6.1.4.1.89.61 |
rlMirMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.61.1 |
rlMirMaxNumOfMRIsAfterResetThe maximun instanses of IP Multi Instance Routers after the
following reset.rw INTEGER .1.3.6.1.4.1.89.61.2 |
rlMirMaxNumOfMRIsThe maximun instanses of IP Multi Instance Routers.ro INTEGER .1.3.6.1.4.1.89.61.3 |
rlMirCurMriNumThe number of the MRI of which MIB variables are treated at
the same time by the SNMP agent.rw INTEGER .1.3.6.1.4.1.89.61.4 |
rlMirInterfaceTableA list of the assignment ifinterfaces to IP Router instances. SEQUENCE OF RlMirInterfaceEntry .1.3.6.1.4.1.89.61.5 |
rlMirInterfaceEntryAn entry of this table specifies the MRID assignement to a L2
interfrace. RlMirInterfaceEntry .1.3.6.1.4.1.89.61.5.1 |
rlMirInterfaceIfIndexThe L2 interface for which this entry contains information.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.61.5.1.1 |
rlMirInterfaceMridMulti IP Router Instance Identifier to which the
interface is assgned.rw INTEGER .1.3.6.1.4.1.89.61.5.1.2 |
rlMirVlanBaseReservedPortsTableA list VLAN based reserved physical ports. SEQUENCE OF RlMirVlanBaseReservedPortsEntry .1.3.6.1.4.1.89.61.6 |
rlMirVlanBaseReservedPortsEntryA VLAN based reserved physical port. RlMirVlanBaseReservedPortsEntry .1.3.6.1.4.1.89.61.6.1 |
rlMirVlanBaseReservedPortsIfIndexIfIndex of VLAN based reserved physical port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.61.6.1.1 |
rlMirVlanBaseReservedPortsStatusIt is used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.61.6.1.2 |
rlMirVlanBaseLogicalPortsTableA list VLAN based logical ports. SEQUENCE OF RlMirVlanBaseLogicalPortsEntry .1.3.6.1.4.1.89.61.7 |
rlMirVlanBaseLogicalPortsEntryA VLAN based logical point-to-point port. RlMirVlanBaseLogicalPortsEntry .1.3.6.1.4.1.89.61.7.1 |
rlMirVlanBaseLogicalPortsIfIndexIfIndex of VLAN based Logical point-to-point port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.61.7.1.1 |
rlMirVlanBaseLogicalPortsReservedIfIndexIfIndex of VLAN based reserved physical port on which the logical
port is defined.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.61.7.1.2 |
rlMirVlanBaseLogicalPortsVlanTagVLAN tag.rw INTEGER .1.3.6.1.4.1.89.61.7.1.3 |
rlMirVlanBaseLogicalPortsStatusIt is used to add, update and delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.61.7.1.4 |
rlMirCurMriNumRouterReturns Router Mri Number.ro INTEGER .1.3.6.1.4.1.89.61.8 |
rlMirCurMriNumOobReturns Router Mri Number.ro INTEGER .1.3.6.1.4.1.89.61.9 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.