RADLAN-DHCPv6-RELAY
Standard SNMP MIB module defining data structures for RADLAN-DHCPv6-RELAY.
Imported Objects
Objects
17 total| Object Name |
|---|
rlDhcpv6RelayInterfaceListTableThis table contains interfaces that have configured DHCPv6 relay SEQUENCE OF RLDhcpv6RelayInterfaceListEntry .1.3.6.1.4.1.89.214.3.1 |
rlDhcpv6RelayInterfaceListEntryThe entry contains ifindex field. RLDhcpv6RelayInterfaceListEntry .1.3.6.1.4.1.89.214.3.1.1 |
rlDhcpv6RelayInterfaceListIfIndexInterface that have configured DHCPv6 relay Unsigned32 .1.3.6.1.4.1.89.214.3.1.1.1 |
rlDhcpv6RelayInterfaceListRowStatusThis variable displays the validity or invalidity of the entry.
Setting it to 'destroy' has the effect of rendering it inoperative.
The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.214.3.1.1.2 |
rlDhcpv6RelayDestinationsGlobalTableThe table is used to store the global destinations defined by the
user to which the relay agent forwards RELAY-FW messages SEQUENCE OF RlDhcpv6RelayDestinationsGlobalEntry .1.3.6.1.4.1.89.214.3.2 |
rlDhcpv6RelayDestinationsGlobalEntryThe row definition for this table. RlDhcpv6RelayDestinationsGlobalEntry .1.3.6.1.4.1.89.214.3.2.1 |
rlDhcpv6RelayDestinationsGlobalIpv6AddrTypeThe only inet type that is supported is ipv6 InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.214.3.2.1.1 |
rlDhcpv6RelayDestinationsGlobalIpv6AddrThe address relay uses to forward the message InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.214.3.2.1.2 |
rlDhcpv6RelayDestinationsGlobalOutputInterfaceThe output interface (ifindex) is required only in case the destination address is not global unicast. Unsigned32 .1.3.6.1.4.1.89.214.3.2.1.3 |
rlDhcpv6RelayDestinationsGlobalRowStatusThis variable displays the validity or invalidity of the entry.
Setting it to 'destroy' has the effect of rendering it inoperative.
The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.214.3.2.1.4 |
rlDhcpv6RelayInterfaceDestinationsTableThe table is used to store destinations defined by the user per
interface to which the relay agent forwards RELAY-FW messages SEQUENCE OF RlDhcpv6RelayInterfaceDestinationsEntry .1.3.6.1.4.1.89.214.3.3 |
rlDhcpv6RelayInterfaceDestinationsEntryThe row definition for this table. RlDhcpv6RelayInterfaceDestinationsEntry .1.3.6.1.4.1.89.214.3.3.1 |
rlDhcpv6RelayInterfaceDestinationsIfindexThe relay interface Unsigned32 .1.3.6.1.4.1.89.214.3.3.1.1 |
rlDhcpv6RelayInterfaceDestinationsIpv6AddrTypeThe only inet type that is supported is ipv6 InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.214.3.3.1.2 |
rlDhcpv6RelayInterfaceDestinationsIpv6AddrThe address relay uses to forward the message InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.214.3.3.1.3 |
rlDhcpv6RelayInterfaceDestinationsOutputInterfaceThe output interface (ifindex) is required only in case the destination address is not global unicast. Unsigned32 .1.3.6.1.4.1.89.214.3.3.1.4 |
rlDhcpv6RelayInterfaceDestinationsRowStatusThis variable displays the validity or invalidity of the entry.
Setting it to 'destroy' has the effect of rendering it inoperative.
The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.214.3.3.1.5 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.