RADLAN-ARPSPOOFING-MIB
The RADLAN-ARPSPOOFING-MIB enables monitoring and management of Address Resolution Protocol (ARP) spoofing detection events and security states on RADLAN network infrastructure. It provides specific counters and status indicators for identifying unauthorized ARP packet injection attempts and validating the integrity of the local ARP cache.
Imported Objects
Objects
11 total| Object Name |
|---|
rlArpSpoofingThis private MIB module defines ARP spoofing private MIBs. MODULE-IDENTITY .1.3.6.1.4.1.89.60 |
RADLAN-MIBThis private MIB module defines ARP spoofing private MIBs. Unknown .1.3.6.1.4.1.89.60 |
rlArpSpoofingMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.60.1 |
rlArpSpoofingTableA list of the ifIndexes, IP addresses and corresponding MAC addresses. SEQUENCE OF RlArpSpoofingEntry .1.3.6.1.4.1.89.60.2 |
rlArpSpoofingEntryAn entry of this table specifis ifIndex,IP Address and
MAC address. RlArpSpoofingEntry .1.3.6.1.4.1.89.60.2.1 |
rlArpSpoofingIfIndexThe physical interface for which this entry contains information.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.60.2.1.1 |
rlArpSpoofingLocalIpAddrIp addres for which the device will send ARP reply (ARP spoofing).rw IpAddress .1.3.6.1.4.1.89.60.2.1.2 |
rlArpSpoofingMacAddrMAC addres with which the device will send ARP reply.
If the field is ommited or its value 0.0.0.0 the device will
send with the interface's MAC address.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.60.2.1.3 |
rlArpSpoofingRemoteIpAddrIp addres for which the device will send periodically ARP requests
if its value differs from 0.0.0.0.rw IpAddress .1.3.6.1.4.1.89.60.2.1.4 |
rlArpSpoofingOutPhysIfIndexThe physical interface to which the device will send periodically
ARP requests if its value differs from 0. If its value is 0 then ARP
requests will send to all the VLAN's ports.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.89.60.2.1.5 |
rlArpSpoofingStatusIt is used to insert, update or delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.60.2.1.6 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.