RADLAN-AGGREGATEVLAN-MIB
The RADLAN-AGGREGATEVLAN-MIB enables monitoring and configuration of aggregated VLAN interfaces on RAD (Ruckus) networking equipment, specifically tracking the operational status, traffic statistics, and membership of logical VLAN bundles formed by combining multiple physical ports.
Imported Objects
Objects
14 total| Object Name |
|---|
rlAggregateVlanThis private MIB module defines Aggregate Vlan private MIBs. MODULE-IDENTITY .1.3.6.1.4.1.89.73 |
RADLAN-MIBThis private MIB module defines Aggregate Vlan private MIBs. Unknown .1.3.6.1.4.1.89.73 |
rlAggregateVlanMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.73.1 |
rlAggregateVlanTableThe table creates an aggregateVlans, the IfIndex is from 10000 SEQUENCE OF RlAggregateVlanEntry .1.3.6.1.4.1.89.73.2 |
rlAggregateVlanEntryThe row definition for this table. RlAggregateVlanEntry .1.3.6.1.4.1.89.73.2.1 |
rlAggregateVlanIndexThis index indicate the aggrigateVlan id, the aggregate
vlan index is starting from 10000 InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.73.2.1.1 |
rlAggregateVlanNameThe name of the aggregateVlanrw DisplayString .1.3.6.1.4.1.89.73.2.1.2 |
rlAggregateVlanPhysAddressTypeThis variable indicates whether the physical address assigned to this
VLAN should be the default one or be chosen from the set of
reserved physical addresses of the device.rw Enumeration .1.3.6.1.4.1.89.73.2.1.3 |
rlAggregateVlanStatusThe status of the aggregateVlan table entry. It's used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.73.2.1.4 |
rlAggregateSubVlanTableThe table indicates all the allocated sub-vlans to the
aggregateVlans, an entry in the rlAggregateVlanTable must
be exist before allocating the subVlans SEQUENCE OF RlAggregateSubVlanEntry .1.3.6.1.4.1.89.73.3 |
rlAggregateSubVlanEntryThe row definition for this table. RlAggregateSubVlanEntry .1.3.6.1.4.1.89.73.3.1 |
rlAggregateSubVlanIfIndexIndicate the subVlan that allocated to the aggregate vlanro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.73.3.1.1 |
rlAggregateSubVlanStatusThe status of the aggregateSubVlan table entry.
It's used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.73.3.1.2 |
rlAggregateVlanArpProxyWhen ARP Proxy is enabled, the router can respond to
ARP requests for nodes located on different sub-vlans,
which belong to the same Super VLAN.The router responds
with its own MAC address.
When ARP Proxy is disabled, the router responds only
to ARP requests for its own IP addresses.rw Enumeration .1.3.6.1.4.1.89.73.4 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.