RADIUS-CLIENT-PRIVATE-MIB
AI MIB Summary
The RADIUS-CLIENT-PRIVATE-MIB provides vendor-specific monitoring and management capabilities for QCI RADIUS authentication clients, exposing private metrics such as active session counts, authentication success/failure rates, and client connection states. This module enables granular visibility into RADIUS client performance and operational health within QCI network infrastructure.
The QCI Private MIB for Radius Authentication Client
Main OID:
radius.1.3.6.1.4.1.52642.1.8
47
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
47 total| Object Name |
|---|
radiusThe QCI Private MIB for Radius Authentication Client MODULE-IDENTITY .1.3.6.1.4.1.52642.1.8 |
agentRadiusConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.8.1 |
agentRadiusMaxTransmitMaximum number of retransmissions of a RADIUS request packetrw Unsigned32 .1.3.6.1.4.1.52642.1.8.1.1 |
agentRadiusTimeoutTime out duration (in seconds) before packets are retransmittedrw Unsigned32 .1.3.6.1.4.1.52642.1.8.1.2 |
agentRadiusAccountingModeIdentifies if RADIUS Accounting has been enabled or notrw Enumeration .1.3.6.1.4.1.52642.1.8.1.3 |
agentRadiusStatsClearWhen set to enable(1), all Radius statistics will be reset.rw Enumeration .1.3.6.1.4.1.52642.1.8.1.4 |
agentRadiusAccountingIndexNextValidIndicates the next valid index into the agentRadiusAccountingConfigTable
for creation. If no additional entries are allowed, this will be 0.ro Integer32 (0|1..2147483647) .1.3.6.1.4.1.52642.1.8.1.5 |
agentRadiusAccountingConfigTableTable with information about Radius Accounting Server IP
Addresses, port numbers and shared secret. Only one entry is
supported at this time. SEQUENCE OF AgentRadiusAccountingConfigEntry .1.3.6.1.4.1.52642.1.8.1.6 |
agentRadiusAccountingConfigEntryEntry consisting of configuration data for a Radius Accounting Server. AgentRadiusAccountingConfigEntry .1.3.6.1.4.1.52642.1.8.1.6.1 |
agentRadiusAccountingServerIndexUnique index of the configured RADIUS accounting server. The next valid
value of this object for creation is specified by
agentRadiusAccountingIndexNextValid. Integer32 .1.3.6.1.4.1.52642.1.8.1.6.1.1 |
agentRadiusAccountingServerAddressIP Address of the configured RADIUS accounting server.
This object cannot be changed after creation.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.52642.1.8.1.6.1.2 |
agentRadiusAccountingServerAddressTypeIP Address Type of the configured RADIUS accounting server.
This object cannot be changed after creation.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.52642.1.8.1.6.1.3 |
agentRadiusAccountingPortPort number for the RADIUS accounting server.rw Unsigned32 .1.3.6.1.4.1.52642.1.8.1.6.1.4 |
agentRadiusAccountingSecretConfigured shared sercret for the RADIUS accounting server.rw DisplayString .1.3.6.1.4.1.52642.1.8.1.6.1.5 |
agentRadiusAccountingStatusCreates or destroys a RADIUS accounting server entry.
During creation, the next available index is specified by the
agentRadiusAccountingIndexNextValid object. Rows creation using
a different value for agentRadiusAccountingServerIndex will fail.
active(1) - This entry is active.
createAndGo(4) - Creates a new entry.
destroy(6) - Deletes an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.52642.1.8.1.6.1.6 |
agentRadiusAccountingServerNameConfigured identification name for the RADIUS Accounting
server.rw DisplayString .1.3.6.1.4.1.52642.1.8.1.6.1.7 |
agentRadiusServerIndexNextValidIndicates the next valid index into the agentRadiusServerConfigTable
for creation. If no additional entries are allowed, this will be 0.ro Integer32 (0|1..2147483647) .1.3.6.1.4.1.52642.1.8.1.7 |
agentRadiusServerConfigTableTable with information about Radius Authentication Server IP
Addresses, port numbers and shared secret SEQUENCE OF AgentRadiusServerConfigEntry .1.3.6.1.4.1.52642.1.8.1.8 |
agentRadiusServerConfigEntryEntry consisting of configuration data for a Radius
Authentication Server. AgentRadiusServerConfigEntry .1.3.6.1.4.1.52642.1.8.1.8.1 |
agentRadiusServerIndexUnique index of the configured RADIUS server Integer32 .1.3.6.1.4.1.52642.1.8.1.8.1.1 |
agentRadiusServerAddressIP Address of the configured RADIUS server.
This object cannot be changed after creation.rwobsolete InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.52642.1.8.1.8.1.2 |
agentRadiusServerAddressTypeIP Address Type of the configured RADIUS server.
This object cannot be changed after creation.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.52642.1.8.1.8.1.3 |
agentRadiusServerPortPort number for the RADIUS server.rw Unsigned32 .1.3.6.1.4.1.52642.1.8.1.8.1.4 |
agentRadiusServerSecretConfigured shared sercret for the RADIUS server.rw DisplayString .1.3.6.1.4.1.52642.1.8.1.8.1.5 |
agentRadiusServerPrimaryModeConfigure the RADIUS server to be the primary server. If there is any
other server that is configured to be primary, that server is set to be
a seconday server and this entry is set Primary.rw Enumeration .1.3.6.1.4.1.52642.1.8.1.8.1.6 |
agentRadiusServerCurrentModeIndicate if the RADIUS server is the current server in user for
authentication.ro Enumeration .1.3.6.1.4.1.52642.1.8.1.8.1.7 |
agentRadiusServerMsgAuthEnable or disable the message authenticator attribute for this
RADIUS server.rw Enumeration .1.3.6.1.4.1.52642.1.8.1.8.1.8 |
agentRadiusServerRowStatusCreates or destroys a RADIUS Authentication server entry.
During creation, the next available index is specified by the
agentRadiusServerIndexNextValid object. Rows creation using
a different value for agentRadiusServerIndex will fail.
active(1) - This entry is active.
createAndGo(4) - Creates a new entry.
destroy(6) - Deletes an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.52642.1.8.1.8.1.9 |
agentRadiusServerNameConfigured identification name for the RADIUS server.rw DisplayString .1.3.6.1.4.1.52642.1.8.1.8.1.10 |
agentRadiusServerInetAddressIP Address of the configured RADIUS server.
This object cannot be changed after creation.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.52642.1.8.1.8.1.11 |
agentRadiusServerTimeoutTime out duration (in seconds) before packets are retransmittedro Unsigned32 .1.3.6.1.4.1.52642.1.8.1.8.1.12 |
agentRadiusServerRetransmitMaximum number of retransmissions of a RADIUS request packetro Unsigned32 .1.3.6.1.4.1.52642.1.8.1.8.1.13 |
agentRadiusServerDeadtimeLength of time (in minutes) for which a RADIUS server is skipped over by transaction requests.ro Unsigned32 .1.3.6.1.4.1.52642.1.8.1.8.1.14 |
agentRadiusServerSourceIPAddrSource IP address that will be used for the communication with RADIUS servers.rwobsolete IpAddress .1.3.6.1.4.1.52642.1.8.1.8.1.15 |
agentRadiusServerPriorityPriority specifies the order in which the servers will be used, where 0 is the highest
priority in radius server config mode.rwobsolete Unsigned32 .1.3.6.1.4.1.52642.1.8.1.8.1.16 |
agentRadiusServerUsageTypeSpecify the usage type of the server.rwobsolete Enumeration .1.3.6.1.4.1.52642.1.8.1.8.1.17 |
agentRadiusAuthenticationServersNumber of RADIUS Authentication Servers that have been configured.ro Unsigned32 .1.3.6.1.4.1.52642.1.8.1.9 |
agentRadiusAccountingServersNumber of RADIUS Accounting Servers that have been configured.ro Unsigned32 .1.3.6.1.4.1.52642.1.8.1.10 |
agentRadiusNamedAuthenticationServerGroupsNumber of configured RADIUS named Authentication Server groups.ro Unsigned32 .1.3.6.1.4.1.52642.1.8.1.11 |
agentRadiusNamedAccountingServerGroupsNumber of configured RADIUS named Accounting Server groups.ro Unsigned32 .1.3.6.1.4.1.52642.1.8.1.12 |
agentRadiusDeadTimeLength of time (in minutes) for which a RADIUS server is skipped over by transaction requests.rw Unsigned32 .1.3.6.1.4.1.52642.1.8.1.13 |
agentRadiusServerKeyRADIUS Server key specifies the authentication and encryption key for all RADIUS communications
between the switch and the RADIUS server. This key must match the encryption used on the RADIUS
daemon.rwobsolete DisplayString .1.3.6.1.4.1.52642.1.8.1.14 |
agentRadiusSourceIPAddrSource IP address that will be used for the communication with RADIUS servers.rwobsolete IpAddress .1.3.6.1.4.1.52642.1.8.1.15 |
agentRadiusNasIpAddressUsed to set the NAS-IP address for the radius server.
A value of 0.0.0.0 will disable radius attribute 4 mode.rw IpAddress .1.3.6.1.4.1.52642.1.8.1.16 |
agentAuthorizationNetworkRadiusModeUsed to enable/disable Vlan assignment mode.rw Enumeration .1.3.6.1.4.1.52642.1.8.1.17 |
agentRadiusNasIpv6AddressUsed to set the NAS-IPv6 address for the radius server.
A value of :: will disable radius attribute 95 mode.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.52642.1.8.1.18 |
agentRadiusSourceInterfaceA source-interface selection on an Interface Index (like vlan based
routing interface, port based routing interface, loopback interface).
A non-zero value indicates ifIndex for the corresponding interface
entry in the ifTable is selected. A zero value indicates the
source-interface un-selection.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.52642.1.8.1.19 |