FS-AC-MGMT-MIB
AI MIB Summary
The FS-AC-MGMT-MIB module enables SNMP-based monitoring and configuration of Fortinet Access Controller (AC) devices, specifically tracking wireless session states, client association metrics, radio interface statistics, and access point operational parameters.
This module defines ac management mibs.
Main OID:
fsAcMgmtMIB.1.3.6.1.4.1.52642.1.1.10.2.56
200
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
200 total| Object Name |
|---|
fsAcMgmtMIBThis module defines ac management mibs. MODULE-IDENTITY .1.3.6.1.4.1.52642.1.1.10.2.56 |
fsAcMgmtAcMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.1 |
fsAcMgmtAc OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1 |
fsAcStaLimitThe max station this AC supports.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.1 |
fsAcWtpLimitThe max wtp this AC supports.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.2 |
fsAcRMacFieldSet AC's R-MAC Field.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.3 |
fsAcDataDtlsSet AC's DTLS Policy Field.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.4 |
fsAcEcnSupportSet AC's ECN Support Field.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.5 |
fsAcAcIpTableAdd or Del the AC's backup ip address. SEQUENCE OF FSAcAcIpTableEntry .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.6 |
fsAcAcIpTableEntryThe entry of Ac's backup ip address. FSAcAcIpTableEntry .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.6.1 |
fsAcAcIpIndexAC's Ac name with priority index.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.6.1.1 |
fsAcBackAcIpSet AC's ip list.rw IpAddress .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.6.1.2 |
fsAcAcIpRSUsed to add or del a backup ac ip address in the ac.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.6.1.3 |
fsAcMtuSet AC's MTU.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.7 |
fsAcAcNameSet AC's Name.rw DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.8 |
fsAcLocationAc's location information.rw DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.9 |
fsAcResetApDelete the ap by assigning the ap name.rw DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.10 |
fsAcApNumAp num attached to this ac.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.11 |
fsAc80211aRateTableThe Ap attributes. SEQUENCE OF FSAc80211aRateEntry .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.12 |
fsAc80211aRateEntryGet and set the Ap attribtues. FSAc80211aRateEntry .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.12.1 |
fsAc80211aRateThe global 802.11a rate set in this AC.
802.11a-6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
set 1 for 6Mbps, set 2 for 9Mbps, set 3 for 12Mbps,etc... INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.12.1.1 |
fsAcFallbackThe fallback state:
1disablerw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.14 |
fsAcStaNumThe client num in this AC.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.15 |
fsAcMacAddrThe AC's mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.16 |
fsAcDescriptorThe AC's descriptor.ro DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.17 |
fsAcPIDThe AC's product id.ro DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.18 |
fsAcHwIdThe AC's Hardware Id.ro DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.19 |
fsAcSNThe AC's serial number.ro DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.20 |
fsAcTempThe AC's temperature.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.21 |
fsAcAPUpDownCtrlThe AP Up/Down trap control
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.22 |
fsAcAPJoinFailCtrlThe AP join fail control
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.23 |
fsAcAPDecryEroReportCtrlThe AP Decry Error Report control
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.24 |
fsAcApImageUpdtCtrlThe AP Image Update Control
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.25 |
fsAcApConfigMsgEroCtrlThe AP Config Message Error
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.26 |
fsAcApRadioOperStatuCtrlThe AP Radio Oper Status
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.27 |
fsAcApAuthenFailCtrlThe AP Authen Fail trap control
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.28 |
fsAcApTimestampCtrlThe AP timestamp trap control
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.29 |
fsAcStaOperCtrlThe Sta operation trap control
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.30 |
fsAcTypeThe Ac type.ro Enumeration .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.31 |
fsAcNeidThe Ac system net id.rw DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.32 |
fsAcManufacturerThe Ac's Manufacturer.ro DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.33 |
fsAcSwVerThe Ac's software version.ro DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.34 |
fsAcSwManufacturerThe Ac's software Manufacturer.ro DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.35 |
fsAcStaResourceNotEnoughThe sta number which can not attach to
this system for not enough resource.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.36 |
fsAcPppoeClientActThe active client number in this AC.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.37 |
fsAcPppoeClientMaxThe client number which this AC support.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.38 |
fsAcStaActThredholdThe thredhold which the client attach to this AC in one hour.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.39 |
fsAcStaDisactThredholdThe thredhold which the client leave this AC in one hour.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.40 |
fsAcStaTotalRoamThredholdThe thredhold which the client's total roaming times.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.41 |
fsAcStaPerRoamThredholdThe thredhold which the client's roaming times per minite.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.42 |
fsAcStaOffLineRemainTimeThis object presents the time which the off line STA statistic remain in the AC.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.43 |
fsAcStaOffLineNumberThis object presents the max number of the off line STA number statistic.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.44 |
fsAcStaOffLineDelSingleThis object presents the mac address which the off line STA to remove its statistic.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.45 |
fsAcStaOffLineDelAllThis object is set to clear all of the off line STA's statistic.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.46 |
fsAcRmOffLineApConfigThis object is set to delete the off line AP's configuration.rw DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.47 |
fsAcFlowBlGroupTableThe flow balance group table SEQUENCE OF FSAcFlowBlGroupEntry .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48 |
fsAcFlowBlGroupEntryGet and set the flow balance group attribute. FSAcFlowBlGroupEntry .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1 |
fsAcFlowBlGroupNameThe flow balance group's name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.1 |
fsAcFlowBlApName1The AP name belong to this flow balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.2 |
fsAcFlowBlApName2The AP name belong to this flow balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.3 |
fsAcFlowBlApName3The AP name belong to this flow balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.4 |
fsAcFlowBlApName4The AP name belong to this flow balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.5 |
fsAcFlowBlApName5The AP name belong to this flow balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.6 |
fsAcFlowBlApName6The AP name belong to this flow balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.7 |
fsAcFlowBlApName7The AP name belong to this flow balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.8 |
fsAcFlowBlApName8The AP name belong to this flow balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.9 |
fsAcFlowBlApName9The AP name belong to this flow balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.10 |
fsAcFlowBlApName10The AP name belong to this flow balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.11 |
fsAcFlowBlNumThe flow balance group's flow throshold.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.12 |
fsAcFlowBlRSUsed to add or del or modify the flow balance table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.13 |
fsAcFlowBlEnableThe flow balance group's flow enable throshold.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.14 |
fsAcFlowBlBaseThe flow balance group's flow base.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.15 |
fsAcFlowBlIsEnableThe flow balance group's enable/disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.48.1.16 |
fsAcNumBlGroupTableThe number balance group table SEQUENCE OF FSAcNumBlGroupEntry .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49 |
fsAcNumBlGroupEntryGet and set the number balance group attribute. FSAcNumBlGroupEntry .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1 |
fsAcNumBlGroupNameThe number balance group's name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.1 |
fsAcNumBlApName1The AP name belong to this number balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.2 |
fsAcNumBlApName2The AP name belong to this number balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.3 |
fsAcNumBlApName3The AP name belong to this number balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.4 |
fsAcNumBlApName4The AP name belong to this number balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.5 |
fsAcNumBlApName5The AP name belong to this number balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.6 |
fsAcNumBlApName6The AP name belong to this number balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.7 |
fsAcNumBlApName7The AP name belong to this number balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.8 |
fsAcNumBlApName8The AP name belong to this number balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.9 |
fsAcNumBlApName9The AP name belong to this number balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.10 |
fsAcNumBlApName10The AP name belong to this number balance group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.11 |
fsAcNumBlNumThe number balance group's number throshold.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.12 |
fsAcNumBlRSUsed to add or del or modify the number balance table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.13 |
fsAcNumBlEnableThe number balance group's number enable throshold.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.14 |
fsAcNumBlIsEnableThe number balance group's enable/disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.49.1.15 |
fsAcInAcRoamNumThe Sta roaming in this AC.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.50 |
fsAcBetweenAcRoamInNumThe Sta roaming in timers while roaming between ACs.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.51 |
fsAcStaOnOverThrodOperCtrlThe Sta on times over thredhold trap control
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.52 |
fsAcStaOffOverThrodOperCtrlThe Sta off times over thredhold trap control
0 - off
1 - on.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.53 |
fsAcBetweenAcRoamOutNumThe Sta roaming out timers while roaming between ACs.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.1.1.54 |
fsAcMgmtAcIf OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.1.2 |
fsAcMgmtApMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.2 |
fsAcMgmtAp OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1 |
fsApCfgRadioTableSet the ap attribute per radio. SEQUENCE OF FSApCfgRadioEntry .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2 |
fsApCfgRadioEntryThe entry of image id table. FSApCfgRadioEntry .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1 |
fsApCfgRadioIdThe radio id, 1~31.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.1 |
fsApRadioEn0enable.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.2 |
fsApTxPowerTx power, 1%.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.3 |
fsApDtimPeriodbeacon dtim period, second.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.4 |
fsApBeaconPeriodbeacon period, millisecond.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.5 |
fsApCountryAp country code.rw DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.6 |
fsApPreaShortShort preamble support.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.7 |
fsApRadioBssidThe AP's radio mac address(BSSID).ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.8 |
fsApTxPowerLevelThe ap's tx power level in the radio.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.9 |
fsApTxPowerGlobalThe ap's tx power config as the Global or not.
0
::= { fsApCfgRadioEntry 10}
fsApCurChan OBJECT-TYPE
SYNTAX INTEGER (1..165)
MAX-ACCESS read-write
STATUS current
DESCRIPTIONrw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.12 |
fsApRadioType1
2
::= { fsApCfgRadioEntry 13}
fsApRadio11bSup OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTIONrw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.14 |
fsApMaxTxPowerMax tx power, mw.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.15 |
fsApMinTxPowerMin tx power, mw.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.16 |
fsApCurTxPowerCurrent tx power, mw.rw INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.17 |
fsApMaxTxPowerPerMax tx power percent, %.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.18 |
fsApMinTxPowerPerMin tx power percent, %.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.2.1.19 |
fsApRadioRateCfgTableThe rate set of the ap's radio. SEQUENCE OF FSApRadioRateCfgEntry .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.3 |
fsApRadioRateCfgEntryThe attribute of the ap radio rate type. FSApRadioRateCfgEntry .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.3.1 |
fsApRadioRateThe ap's rate set in the radio.
802.11a-6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
set 1 for 6Mbps, set 2 for 9Mbps, set 3 for 12Mbps,etc...
802.11b-1, 2, 5.5, 11Mbps.
set 1 for 1Mbps, set 2 for 2Mbps, set 3 for 5.5Mbps,etc... INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.3.1.1 |
fsApGeneralCfgTableThe general Ap attribtues, include online and offline Aps. SEQUENCE OF FSApGeneralCfgEntry .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.8 |
fsApGeneralCfgEntryGet and set the general Ap attribtues. FSApGeneralCfgEntry .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.8.1 |
fsApGeneralMacAddrThe AP's ethernet mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.8.1.1 |
fsApGeneralApNameThe Ap's Name.rw DisplayString .1.3.6.1.4.1.52642.1.1.10.2.56.2.1.8.1.2 |
fsAcMgmtApIf OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.2.2 |
fsAcMgmtApgMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.3 |
fsAcMgmtApg OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.3.1 |
fsAcMgmtApgIf OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.3.2 |
fsAcMgmtWlanMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.4 |
fsAcMgmtWlan OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.4.1 |
fsAcMgmtWlanIf OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.4.2 |
fsAcMgmtStaMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.5 |
fsAcMgmtSta OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.5.1 |
fsAcMgmtStaIf OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.5.2 |
fsAcMgmtNotificationsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.6 |
fsAcMgmtNtfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.6.1 |
fsApGeneralStateThe AP's state.
1
2
::= { fsApGeneralCfgEntry 3}
fsApGeneralTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Enumeration .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.7 |
fsNotifyStaVlanIdVlan Id the sta belongs toro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.8 |
fsNotifyStaWlanIdWlan Id the sta belongs toro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.9 |
fsNotifyAcMBChangeV1 - Master to backup,
2 - Backup to masterro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.10 |
fsNotifyStaOperTimesThis object present the times when the
STA is active, disactive, roaming.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.11 |
fsNotifyAcPowerIndexThis object present the AC's power unit index.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.12 |
fsNotifyAcPowerStatuThis object present the AC's power statu, 0-off, 1-on.ro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.13 |
fsNotifyTimeThis object present the sta operation current time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.14 |
fsNotifyOldVerThis object present the AP's old version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.15 |
fsNotifyNewVerThis object present the AP's new version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.16 |
fsNotifyVerUpdtReasonThis object present the AP's firmware updating fail reason.
1
2
3
4
5
6
::= { fsAcMgmtNtfObjects 17 }
fsNotifyStaIpv6 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTIONro INTEGER .1.3.6.1.4.1.52642.1.1.10.2.56.6.1.33 |
fsAcMgmtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.6.2 |
fsNotifyApTimeStampFailThis notification is sent by the AC when an AP sync the time failed. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.1 |
fsNotifyStaOperThis notification is sent by the AC when a sta enter or quit or ip update. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.2 |
fsNotifyAcMBChangeThis notification is sent by the AC change from
smaster to backup or backup to master. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.3 |
fsNotifyApSwUpdtFailThis notification is sent by the AC when update the AP software failed. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.4 |
fsNotifyStaActOverThredholdThis notification is sent by the AC when a sta active times over thredhold. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.5 |
fsNotifyStaDisactOverThredholdThis notification is sent by the AC when a sta's disactive times over thredhold. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.6 |
fsNotifyStaRoamTotalThis notification is sent by the AC when a sta's total
roaming times over thredhold . NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.7 |
fsNotifyStaRoamPerMinThis notification is sent by the AC when a sta's
roaming times per minite over thredhold . NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.8 |
fsNotifyAcPowerStatusThis notification is sent by the AC when the
AC's power unit status changed. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.9 |
fsNotify86PowerOffAlarmThis notification is sent by the 86 power off. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.10 |
fsNotify86PowerOffAlarmClearThis notification is sent by the 86 power on. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.11 |
fsNotifyApSwUpdtSuccessThis notification is sent by the AC when update the AP software success. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.12 |
fsNotifyApUpThis notification is sent by the AC when a CAPWAP channel
established. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.13 |
fsNotifyApDownThis notification is sent by the AC when CAPWAP channel
becomes down. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.14 |
fsNotifyApSwUpdtFailApMacThis notification is sent by the AC when update the AP software failed. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.15 |
fsNotifyApTimeStampFailApMacThis notification is sent by the AC when an AP sync the time failed. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.16 |
fsNotifyStaOperAlternateThis notification is sent by the AC when a sta is up, down or roaming. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.17 |
fsNotifyNonrootOperThis notification is sent by the AC when a Nonroot is attach or leave. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.18 |
fsNotifyMicroApActionThis notification when Micro Ap up or down. NOTIFICATION-TYPE .1.3.6.1.4.1.52642.1.1.10.2.56.6.2.19 |
fsAcMgmtAcMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.7 |
fsAcMgmtAcMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.7.1 |
fsAcMgmtAcMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.1.10.2.56.7.2 |
fsAc80211aRateTypeThe rate type:
1
2
3
::= { fsAc80211aRateEntry 2}
fsAc80211bRateTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSAc80211bRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTIONrw INTEGER .fsAc80211bRateEntry.2 |
fsAcCpusageSwitchThis object presents the fsApCpuUsageTrapTimer node active or not.
1
2
::= { fsAcMgmtAc 55 }
fsAcCpuUsageTrapTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTIONrw INTEGER .fsApCfgEntry.42 |
fsApCpuUsageTrapTimerThis object represents the AP's cpu usage info trap timer,
second.rw INTEGER .fsApCfgEntry.43 |
fsApStatTrapTimerThis object present the AP's radio statistic
trap timer, second.rw INTEGER .fsApCfgEntry.44 |
fsApLinkOnTimeIntervalThis object represents the AP's Link on time interval, seconds.ro INTEGER .fsApCfgEntry.45 |
fsApNetIdThis object represents the AP's net unit code.rw DisplayString (SNMPv2-TC) .fsApCfgEntry.46 |
fsApUptimeThis object represents the AP's capwap uptime.ro DisplayString (SNMPv2-TC) .fsApCfgEntry.47 |
fsApStateThis object represents the AP's state.
1
2
::= { fsApCfgEntry 48 }
fsApNasId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTIONro INTEGER .fsApCfgEntry.50 |
fsApLinkOnTimeIntervalMsThis object represents the AP's Link on time interval, 0.01seconds.ro TimeTicks (SNMPv2-SMI) .fsApCfgEntry.51 |
fsApUptimeMsThis object represents the AP's capwap uptime, 0.01seconds.ro TimeTicks (SNMPv2-SMI) .fsApCfgEntry.52 |
fsApHbUptimeMsThis object represents the AP's capwap hotback uptime, 0.01seconds.ro TimeTicks (SNMPv2-SMI) .fsApCfgEntry.53 |
fsApIpv6This object represents ipv6 address of the AP.ro InetAddress (INET-ADDRESS-MIB) .fsApCfgEntry.54 |
fsApIpv6PrefixThis object represents ipv6 address prefix of the AP.ro DisplayString (SNMPv2-TC) .fsApCfgEntry.55 |
fsApIpv6PrefixLenThis object represents ipv6 address prefix length of the AP.ro INTEGER .fsApCfgEntry.56 |
fsApIpv6TypeThis object represents ipv6 address type of the AP.ro Enumeration .fsApCfgEntry.57 |
fsApIpv6GatewayThis object represents ipv6 gateway address of the AP.ro DisplayString (SNMPv2-TC) .fsApCfgEntry.58 |
fsApIpv6StaNumThis object represents ipv6 Sta Num attach to the AP.ro INTEGER .fsApCfgEntry.59 |
fsApMacAddrColonThe AP's ethernet mac address separated by the colon character, format: XX:XX:XX:XX:XX:XXro DisplayString .fsApCfgEntry.60 |
fsApMacAddrLineThe AP's ethernet mac address separated by the line character, format: XX-XX-XX-XX-XX-XXro DisplayString .fsApCfgEntry.61 |
fsApMacAddrDotThe AP's ethernet mac address separated by the dot character, format: xxxx.xxxx.xxxxro DisplayString .fsApCfgEntry.62 |
fsApEchoRequestCntThis object represents echo request Num from the AP.ro Counter32 .fsApCfgEntry.63 |
fsApEchoResponseDropCntThis object represents echo response drop Num from the AP.ro Counter32 .fsApCfgEntry.64 |
fsApEchoDelayTimeMSThis object represents echo delay time from the AP.ro INTEGER .fsApCfgEntry.65 |
fsApIsIsharePlusThe AP is or not IsharePlus.ro INTEGER .fsApCfgEntry.66 |
fsApTotalMicrolApNumThe total microl Ap number.ro INTEGER .fsApCfgEntry.67 |
fsApOnlineMicrolApNumThe online microl Ap number.ro INTEGER .fsApCfgEntry.68 |
fsApOfflineMicrolApNumThe offline microl Ap number.ro INTEGER .fsApCfgEntry.69 |
fsApRadioRateTypeThe rate type:
1
2
3
::= { fsApRadioRateCfgEntry 2}
fsApStaticIpCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSApStaticIpCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTIONrw INTEGER .fsApMicroApEntry.3 |
fsApMicroApUninstallUninstall Micro AP:
1
::= { fsApMicroApEntry 4}
fsApMicroApMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTIONrw INTEGER .fsApMicroApEntry.7 |
fsApMicroApRoleMicro AP Rolero DisplayString .fsApMicroApEntry.8 |
fsApMicroApMasterSlotThe Micro Ap's Intf Id.ro INTEGER .fsApMicroApEntry.9 |