QoS-MIB
The structure of QoS for the proprietary enterprise.
Main OID:
swQoSMIB.dlink-common-mgmt.61
70
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
swQoSMIBThe structure of QoS for the proprietary enterprise. MODULE-IDENTITY .dlink-common-mgmt.61 |
swQoSCtrl OBJECT IDENTIFIER .dlink-common-mgmt.61.1 |
swQoSInfo OBJECT IDENTIFIER .dlink-common-mgmt.61.2 |
swQoSMgmt OBJECT IDENTIFIER .dlink-common-mgmt.61.3 |
swQoSBandwidthControlTable. SEQUENCE OF SwQoSBandwidthControlEntry .dlink-common-mgmt.61.3.1 |
swQoSBandwidthControlEntryA list of information contained in the swQoSBandwidthControlTable. SwQoSBandwidthControlEntry .dlink-common-mgmt.61.3.1.1 |
swQoSBandwidthPortIndicates the port number.ro INTEGER .dlink-common-mgmt.61.3.1.1.1 |
swQoSBandwidthRxRateIndicates Rx Rate of the specified port.
Value 0 means no limit.rw INTEGER (0|8..10240000) .dlink-common-mgmt.61.3.1.1.2 |
swQoSBandwidthTxRateIndicates the Tx Rate of the specified port.
A value of 0 means no limit.rw INTEGER (0|8..10240000) .dlink-common-mgmt.61.3.1.1.3 |
swQoSBandwidthRadiusRxRateThe Rx Rate value comes from the RADIUS server,
If an 802.1X port is authenticated, this value
will overwrite the locally configured Rx Rate.ro INTEGER .dlink-common-mgmt.61.3.1.1.4 |
swQoSBandwidthRadiusTxRateThe Tx Rate value comes from the RADIUS server,
If an 802.1X port is authenticated, this value
will overwrite the locally configured Tx Rate.ro INTEGER .dlink-common-mgmt.61.3.1.1.5 |
swQoSSchedulingTable. SEQUENCE OF SwQoSSchedulingEntry .dlink-common-mgmt.61.3.2 |
swQoSSchedulingEntryA list of information contained in the swQoSSchedulingTable. SwQoSSchedulingEntry .dlink-common-mgmt.61.3.2.1 |
swQoSSchedulingPortIndicates the port number.ro INTEGER .dlink-common-mgmt.61.3.2.1.1 |
swQoSSchedulingClassIDIndicates the hardware queue number.ro INTEGER .dlink-common-mgmt.61.3.2.1.2 |
swQoSSchedulingWeightIndicates the maximum number of packets the above specified hardware
priority queue will be allowed to transmit before allowing
the next lowest priority queue to transmit its packets.rw INTEGER .dlink-common-mgmt.61.3.2.1.3 |
swQoSSchedulingMechanismIndicates the mechanism of QoS scheduling.
This object indicates the Qos Scheduling Mechanism mode on a port.rw Enumeration .dlink-common-mgmt.61.3.2.1.4 |
swQoSSchedulingMechanismEffecIndicates the effective mechanism of QoS scheduling.
If the swQoSSchedulingWeight is configured to be 0,
then this object will always display strict (1).ro Enumeration .dlink-common-mgmt.61.3.2.1.5 |
swQoS8021pDefaultPriorityTable. SEQUENCE OF SwQoS8021pDefaultPriorityEntry .dlink-common-mgmt.61.3.3 |
swQoS8021pDefaultPriorityEntryA list of information contained in the swQoS8021pDefaultPriorityTable. SwQoS8021pDefaultPriorityEntry .dlink-common-mgmt.61.3.3.1 |
swQoS8021pRadiusPriorityIndicates the value of 802.1p comes from RADIUS server.
If an 802.1X port is authenticated,
this value will overwrite the local configured value.ro INTEGER .dlink-common-mgmt.61.3.3.1.1 |
swQosHolPreventionMgmt OBJECT IDENTIFIER .dlink-common-mgmt.61.3.4 |
swQoSHolPreventionCtrlThis controls QoS HoL Prevention.rw Enumeration .dlink-common-mgmt.61.3.4.6 |
swQosInBandMgmt OBJECT IDENTIFIER .dlink-common-mgmt.61.3.5 |
swQosInBandMgmtSetDefPrioritySets the default priority. It is project dependent.rw Enumeration .dlink-common-mgmt.61.3.5.1 |
swQosInBandMgmtPktPrioritySpecifies the priority of packets, the range is 0-7. 7 is the highest priority.rw INTEGER .dlink-common-mgmt.61.3.5.2 |
swQos8021pColorMapMgmt OBJECT IDENTIFIER .dlink-common-mgmt.61.3.6 |
swQos8021pColorMapCtrlTableA table that contains information about priority map
to packet color on each port. SEQUENCE OF SwQos8021pColorMapCtrlEntry .dlink-common-mgmt.61.3.6.1 |
swQos8021pColorMapCtrlEntryA list that contains priority map to packet color per port. SwQos8021pColorMapCtrlEntry .dlink-common-mgmt.61.3.6.1.1 |
swQos8021pColorMapCtrlPortIndexThis object indicates the port number.ro INTEGER .dlink-common-mgmt.61.3.6.1.1.1 |
swQos8021pColorMapCtrlPriorityIndexThis object indicates the source priority of
incoming packets.ro INTEGER .dlink-common-mgmt.61.3.6.1.1.2 |
swQos8021pColorMapCtrlColorThis object indicates the source priority of
incoming packets.rw Enumeration .dlink-common-mgmt.61.3.6.1.1.3 |
swQos8021pColorMapGlobalCtrlTableA table that contains information about priority map
to packet color. SEQUENCE OF SwQos8021pColorMapGlobalCtrlEntry .dlink-common-mgmt.61.3.6.2 |
swQos8021pColorMapGlobalCtrlEntryA list that contains priority map to packet color. SwQos8021pColorMapGlobalCtrlEntry .dlink-common-mgmt.61.3.6.2.1 |
swQos8021pColorMapGlobalCtrlPriorityIndexThis object indicates the source priority of
incoming packets.ro INTEGER .dlink-common-mgmt.61.3.6.2.1.1 |
swQos8021pColorMapGlobalCtrlColorThis object indicates the source priority of
incoming packets.rw Enumeration .dlink-common-mgmt.61.3.6.2.1.2 |
swQosDscpTrustPortMgmt OBJECT IDENTIFIER .dlink-common-mgmt.61.3.7 |
swQosDscpTrustPortCtrlTableA table that contains information about the
DSCP trust portlist. SEQUENCE OF SwQosDscpTrustPortCtrlEntry .dlink-common-mgmt.61.3.7.1 |
swQosDscpTrustPortCtrlEntryA list that contains the DSCP trusted state per port. SwQosDscpTrustPortCtrlEntry .dlink-common-mgmt.61.3.7.1.1 |
swQosDscpTrustPortCtrlPortIndexThis object indicates the port number.ro INTEGER .dlink-common-mgmt.61.3.7.1.1.1 |
swQosDscpTrustPortCtrlStateThis object is used to enable/disable the DSCP
trusted state on a selected port.rw Enumeration .dlink-common-mgmt.61.3.7.1.1.2 |
swQosDscpMapMgmt OBJECT IDENTIFIER .dlink-common-mgmt.61.3.8 |
swQosDscpMapCtrlTableA table that contains information about
DSCP map to priority and packet color on
each port. SEQUENCE OF SwQosDscpMapCtrlEntry .dlink-common-mgmt.61.3.8.1 |
swQosDscpMapCtrlEntryA list that contains DSCP map information
for each port. SwQosDscpMapCtrlEntry .dlink-common-mgmt.61.3.8.1.1 |
swQosDscpMapCtrlPortIndexThis object indicates the port number.ro INTEGER .dlink-common-mgmt.61.3.8.1.1.1 |
swQosDscpMapCtrlDscpIndexThis object indicates the source DSCP incoming packet.ro INTEGER .dlink-common-mgmt.61.3.8.1.1.2 |
swQosDscpMapCtrl8021pPriorityThis object indicates the 802.1p priority on each port.
Default value is:
DSCP Priority
0-7 0
8-15 1
16-23 2
24-31 3
32-39 4
40-47 5
48-55 6
56-63 7rw INTEGER .dlink-common-mgmt.61.3.8.1.1.3 |
swQosDscpMapCtrlNewDscpThis object indicates the new DSCP map on each port.rw INTEGER .dlink-common-mgmt.61.3.8.1.1.4 |
swQosDscpMapCtrlColorThis object maps the color for packets on each port.rw Enumeration .dlink-common-mgmt.61.3.8.1.1.5 |
swQosDscpMapGlobalCtrlTableA table that contains information about
DSCP map to priority and packet color. SEQUENCE OF SwQosDscpMapGlobalCtrlEntry .dlink-common-mgmt.61.3.8.2 |
swQosDscpMapGlobalCtrlEntryA list that contains DSCP map information. SwQosDscpMapGlobalCtrlEntry .dlink-common-mgmt.61.3.8.2.1 |
swQosDscpMapGlobalCtrlDscpIndexThis object indicates the source DSCP incoming packet.ro INTEGER .dlink-common-mgmt.61.3.8.2.1.1 |
swQosDscpMapGlobalCtrl8021pPriorityThis object indicates the 802.1p priority.
Default value is:
DSCP Priority
0-7 0
8-15 1
16-23 2
24-31 3
32-39 4
40-47 5
48-55 6
56-63 7rw INTEGER .dlink-common-mgmt.61.3.8.2.1.2 |
swQosDscpMapGlobalCtrlNewDscpThis object indicates the new DSCP map.rw INTEGER .dlink-common-mgmt.61.3.8.2.1.3 |
swQosDscpMapGlobalCtrlColorThis object maps the color for packets.rw Enumeration .dlink-common-mgmt.61.3.8.2.1.4 |
swCoSBandwidthControlTableA table that contains information about
CoS Bandwidth Control on each port. SEQUENCE OF SwCoSBandwidthControlEntry .dlink-common-mgmt.61.3.9 |
swCoSBandwidthControlEntryA list that contains CoS Bandwidth Control information
for each port. SwCoSBandwidthControlEntry .dlink-common-mgmt.61.3.9.1 |
swCoSBandwidthPortThis object indicates the port number. INTEGER .dlink-common-mgmt.61.3.9.1.1 |
swCoSBandwidthCoSIDIndicates the hardware queue number. INTEGER .dlink-common-mgmt.61.3.9.1.2 |
swCoSBandwidthMinRateIndicates the Minimum Rate of the specified port.
A value of 0 means no limit.rw INTEGER (0|8..10240000) .dlink-common-mgmt.61.3.9.1.3 |
swCoSBandwidthMaxRateIndicates the Maximum Rate of the specified port.
A value of 0 means no limit.rw INTEGER (0|8..10240000) .dlink-common-mgmt.61.3.9.1.4 |
swQoSScheduleProfileTableA table that contains information about
schedule profile. SEQUENCE OF SwQoSScheduleProfileEntry .dlink-common-mgmt.61.3.10 |
swQoSScheduleProfileEntryA list of information contained in the swQoSScheduleProfileTable. SwQoSScheduleProfileEntry .dlink-common-mgmt.61.3.10.1 |
swQoSScheduleProfileIdIndicates the profile identification. INTEGER .dlink-common-mgmt.61.3.10.1.1 |
swQoSScheduleProfileCoSIDIndicates the hardware queue number. INTEGER .dlink-common-mgmt.61.3.10.1.2 |
swQoSScheduleProfileMechanismIndicates the mechanism of the specify hardware queuerw Enumeration .dlink-common-mgmt.61.3.10.1.3 |
swQoSScheduleProfileWeightIndicates the maximum number of packets the above specified hardware
priority queue will be allowed to transmit before allowing
the next lowest priority queue to transmit its packets.rw INTEGER .dlink-common-mgmt.61.3.10.1.4 |
swQoSScheduleGroupTableA table that contains information about
schedule group. SEQUENCE OF SwQoSScheduleGroupEntry .dlink-common-mgmt.61.3.11 |
swQoSScheduleGroupEntryA list of information contained in the swQoSScheduleGroupTable. SwQoSScheduleGroupEntry .dlink-common-mgmt.61.3.11.1 |
swQoSScheduleGroupPortMemberIndicates the ports that use the specified profile identification.rw PortList (Q-BRIDGE-MIB) .dlink-common-mgmt.61.3.11.1.1 |