QB-ETHERNET-MIB
Imported Objects
Objects
17 total| Object Name |
|---|
qbEthernetMIBThis module defines proprietary objects that extend those in IETF's the Ethernet-Like Interface MIB. MODULE-IDENTITY .1.3.6.1.4.1.4323.2.5 |
qbDot3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.5.1 |
qbDot3ConfigTableQuantum Bridge proprietary configuration parameters for ethernet-like interfaces. SEQUENCE OF QbDot3ConfigEntry .1.3.6.1.4.1.4323.2.5.1.2 |
qbDot3ConfigEntryQuantum Bridge proprietary configuration parameters for single ethernet-like interface. QbDot3ConfigEntry .1.3.6.1.4.1.4323.2.5.1.2.1 |
qbDot3ConfigSpeedThe configured speed of the interface. This may be set by the administrator or may be the result of auto-negotiation.rwdeprecated Enumeration .1.3.6.1.4.1.4323.2.5.1.2.1.1 |
qbDot3ConfigDuplexModeThe configured mode of the interface.rwdeprecated Enumeration .1.3.6.1.4.1.4323.2.5.1.2.1.2 |
qbDot3ConfigEncapsTypeThe type of data encapsulation used over the AAL5 SSCS layer. The definitions reference RFC 1483 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.rw QbAtmAal5EncapsType (QB-DWS-MIB) .1.3.6.1.4.1.4323.2.5.1.2.1.3 |
qbDot3ConfigRouterAddressThe MAC address of the router that connects to the IOT Ethnernet port. Note that this object is relevant for IOT ports onlyrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4323.2.5.1.2.1.4 |
qbDot3ConfigLoopbackThe loopback configuration of this interface. If used in a set it will cause the agent to place the interface in the desired loopback mode. When read, it will return the interface's curretn loopback configuration.rw QbDot3LoopbackType .1.3.6.1.4.1.4323.2.5.1.2.1.5 |
qbDot3ConfigEnetAdminModeThis object identifies the default administrative baseband MAU type, to be used in conjunction with the operational MAU type denoted by ifMauType. For a detailed description see ifMauDefaultType in RFC2668.rw OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.5.1.2.1.6 |
qbDot3ConfigEnetTypeThis object identifies the MAU type. For a detailed description see ifMauType in RFC2668.ro OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.5.1.2.1.7 |
qbDot3ConfigEnetNegModeThis object is used to enable and disable auto-negotiation on a given port.rw Enumeration .1.3.6.1.4.1.4323.2.5.1.2.1.8 |
qbDot3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.5.2 |
qbDot3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.5.2.1 |
qbDot3ComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.4323.2.5.2.1.1 |
qbDot3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.5.2.2 |
qbDot3GroupThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.4323.2.5.2.2.1 |
More MIBs from Quantum Bridge
Browse all Quantum BridgeMIBs →SNMP MIB module
The QB-ATM-MIB extends standard ATM management capabilities to monitor and control ATM link parameters on Quantum Bridge hardware, specifically exposing vendor-specific objects and counters not defined in the IETF standard ATM-MIB. This module enables granular visibility into ATM interface states, traffic statistics, and error conditions unique to the Quantum Bridge platform.
SNMP MIB module
The QB-PVC-MIB facilitates the monitoring and configuration of Permanent Virtual Circuit (PVC) parameters, including status, traffic counters, and provisioning attributes, specifically within Quantum bridge networking devices. This module enables network administrators to track PVC session states and performance metrics essential for maintaining Layer 2 virtual circuit integrity.
The QB-VT15-MIB enables the provisioning and management of VT1.5/VC12 link parameters specifically within Quantum Bridge devices. This module facilitates the configuration of virtual tributary multiplexing attributes required for synchronous optical networking (SONET/SDH) transport.
The QB-VLAN-MGMT-MIB enables SNMP-based provisioning and monitoring of QB proprietary VLANs by exposing policing and thresholding metrics for administrator-defined traffic policies. It facilitates the retrieval of operational status and configuration parameters specific to QB's VLAN management capabilities.