QB-VT15-MIB
AI MIB Summary
The QB-VT15-MIB enables the provisioning and management of VT1.5/VC12 link parameters specifically within Quantum Bridge devices. This module facilitates the configuration of virtual tributary multiplexing attributes required for synchronous optical networking (SONET/SDH) transport.
This module defines additional objects for the provisioning of VT1.5/VC12 links in Quantum Bridge devices.
Main OID:
qbVTVCMIB.1.3.6.1.4.1.4323.2.9
55
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
55 total| Object Name |
|---|
qbVTVCMIBThis module defines additional objects for the provisioning of VT1.5/VC12 links in Quantum Bridge devices. MODULE-IDENTITY .1.3.6.1.4.1.4323.2.9 |
qbVTVCTables OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.9.1 |
qbVTVCConnTableThe Quantum Bridge VT connection table contains a list of VT1.5 connections that are provisioned at OAS SONET(STS-3) and SDH(STM-1) interfaces between IOT(DS1/E1) ports and VTs/VCs, ATM PVCs and VTs/VCs, VTs/VCs and VTs/VCs ports. The STS-3 interfaces are listed in the sonetMediumTable(RFC2558) as interfaces with the 'sonetMediumType' object set to sonet(1) value. The STM-1 interfaces are listed in the sonetMediumTable(RFC2558) as interfaces with the 'sonetMediumType' object set to sdh(1). The table has 2 indexes of the first end-point: Sonet interface index, vt/vc identifier. Note: All connections between ATM ports and VTs/VCs are listed in the atmVclTable. SEQUENCE OF QbVTVCConnEntry .1.3.6.1.4.1.4323.2.9.1.1 |
qbVTVCConnEntryAn entry in the Quantum Bridge qbVTVCConnTable table. QbVTVCConnEntry .1.3.6.1.4.1.4323.2.9.1.1.1 |
qbVTVCIfIndexThe STS-3/SDH-1 signal interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4323.2.9.1.1.1.1 |
qbVTVCConnIdThe identifier of the specified VT (virtual tributary) or VC signal. The VT identifier is determined by using the following formula: (sts-1) * 28 + (vtgrp-1) * 4 + vtnum. sts-sonet path, vtgrp - sonet path group, vt - VT number.The VC identifier has ranges from 1 to 63. INTEGER .1.3.6.1.4.1.4323.2.9.1.1.1.2 |
qbVTVCConnIotAtmIfIndexAn IOT interface index of the atm layer interface or DS1/E1 interface of the connection between an ATM/IOT and a VT1.5/VC12 or VT1.5/VC12 and VT1.5/VC12. The connection type is indicated by the qbVTVCConnKind object. If this object is set to vt15ToAtm or vt15ToAtm the ATM layer interface is specified. When the iotE1ToVt15, iotDs1ToVt15,iotE1ToVc12, iotDs1ToVc12 values are set the IOT DS1/E1 interface is specified. For a VT to VT connection this object isn't needed.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4323.2.9.1.1.1.3 |
qbVTVCConnNameThe textual name of the VT1.5/VC12 connection as specified by a user. It provides a non-volatile handle for this PVC.The supplied name in the qbVTVCConnName is associated with the same connection for as long as that connection remains.rw DisplayString .1.3.6.1.4.1.4323.2.9.1.1.1.4 |
qbVTVCConnAdminStatusThe desired administrative status of the connection The up and down states indicate that the traffic flow is enabled or disabled respectively across the specified connection.rw AtmVorXAdminStatus (ATM-TC-MIB) .1.3.6.1.4.1.4323.2.9.1.1.1.5 |
qbVTVCConnOperStatusThe current operational status of the connection.ro AtmVorXOperStatus (ATM-TC-MIB) .1.3.6.1.4.1.4323.2.9.1.1.1.6 |
qbVTVCConnLastChangeThe value of sysUpTime at the time this connection entered its current operational state.ro AtmVorXLastChange (ATM-TC-MIB) .1.3.6.1.4.1.4323.2.9.1.1.1.7 |
qbVTVCConnAtmVpiThe value of this object is equal to the VPI used by the ATM VCL mapped through this connection to a VT. The value is irrelevant for a non-ATM connection. (i.e., qbVTVCConnKind isn't set vt15ToAtm or vc12ToAtm value).rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4323.2.9.1.1.1.8 |
qbVTVCConnAtmVciThe value of this object is equal to the VCI used by the ATM VCL mapped through this connection to a VT. The value is irrelevant if a non-ATM connection. (i.e., qbVTVCConnKind isn't set to vt15ToAtm or vc12ToAtm value).rw AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4323.2.9.1.1.1.9 |
qbVTVCConnKindThe VT connection type. Two types of connection can be provisioned on the VT/sonet port (IOT-VT and VT-ATM)rw QbPvcConnKind (QB-DWS-MIB) .1.3.6.1.4.1.4323.2.9.1.1.1.10 |
qbVTVCCrossConnIdThis object is instantiated only for a VT/VC which is cross-connected to another VT/VC. Two entries that have the same value belong to a single entry of qbVTVCCrossConnTable. The corresponding entry in qbVTVCCrossConnTable can be found by sending getnext with qbVTVCIfIndex qbVTVCConnId instances. The value is irrelevant for a non-VTtpVT connection (i.e., qbVTVCConnKind isn't set to vt15Vt15 or vt12Vt12 value).ro INTEGER .1.3.6.1.4.1.4323.2.9.1.1.1.11 |
qbVTVCConnRowStatusThe status column for this IOT ENET interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) This object may only be set to createAndGo(4). Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to createAndGo(4) causes the agent to attempt to create and commit a row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptable to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4323.2.9.1.1.1.12 |
qbVTVCConnLoopbackActivate a connection loopback for a PVC that has an endpoint on this VT. This object, when read, returns one of the following results: enable(1): Loopback is enabled on this VT disable(2): Loopback is disbaled on this VT Setting this object to one of the acceptable values causes the following results depending on the qbVTVCConnLoopbackEndpt value: enable(1): Enable loopback on this VT trib when qbVTVCConnLoopbackEndpt is set to 'vtLoopback'. Enable loopback on IOT or ATM port when qbVTVCConnLoopbackEndpt is set to nonVtloopback'. For VT to VT connection this object activates loopback on this VT. disable(2): Disbale activated loopback. The disabled endpoint is selected depending of the qbVTVCConnLoopbackEndptrw QbEnableStatus (QB-DWS-MIB) .1.3.6.1.4.1.4323.2.9.1.1.1.13 |
qbVTVCConnLoopbackEndptDefine an endpoint on which loopback is activated or disabled. The object works in conjunction with the qbVTVCConnLoopback.rw Enumeration .1.3.6.1.4.1.4323.2.9.1.1.1.14 |
qbVTVCCrossConnTableThe Quantum Bridge VT cross-connection (VT to VT) table contains all point-to-point cross-connections between various VTs that are provisoned at OAS STS-3 Sonet interfaces. The STS-3 interfaces are listed in the sonetMediumTable(RFC2558) as interfaces with the 'sonetMediumType' object set to sonet(1). The table is indexed by four indexes: low interface interface index,low vt identifiers, high interface index, and high vt identifier. The terms low and high are chosen to represent numerical ordering of two interfaces/vt within VT cross-connect. SEQUENCE OF QbVTVCCrossConnEntry .1.3.6.1.4.1.4323.2.9.1.2 |
qbVTVCCrossConnEntryAn entry in the Quantum Bridge QbVTVCCrossConnTable. QbVTVCCrossConnEntry .1.3.6.1.4.1.4323.2.9.1.2.1 |
qbVTVCCrossConnIfIndexEndpt1The STS-3/SDH-1 Sonet low interface index of the specified cross-connection. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4323.2.9.1.2.1.1 |
qbVTVCCrossConnVTIdEndpt1The low VT/VC identifier of the specified VT/VC group of the first cross-connect endpoint. INTEGER .1.3.6.1.4.1.4323.2.9.1.2.1.2 |
qbVTVCCrossConnIfIndexEndpt2The high STS-3 Sonet interface of the specified cross-connection of the second cross-connect endpoint. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4323.2.9.1.2.1.3 |
qbVTVCCrossConnVTIdEndpt2The high VT/VC identifier of the specified VT group of the second cross-connect endpoint. INTEGER .1.3.6.1.4.1.4323.2.9.1.2.1.4 |
qbVTVCCrossConnIndexA unique value to identify this VT to VT cross-connect. For each qbVTVCConnEntry associated with this cross-connect, the agent reports this cross-connect index value in the qbVTVCCrossConnId attribute of the corresponding qbVTVCConnTable entries.rw INTEGER .1.3.6.1.4.1.4323.2.9.1.2.1.5 |
qbVTVCCrossConnNameThe textual name of the VT1.5 cross-connection as specified by a user. It provides a non-volatile handle for this cross-connection. The supplied name in the qbVTVCCrossName is associated with the same cross-connection for as long as that cross-conection remains.rw DisplayString .1.3.6.1.4.1.4323.2.9.1.2.1.6 |
qbVTVCCrossConnAdminStatusThe desired administrative status of the specified cross-connection. The up and down states indicate that the traffic flow is enabled or disabled across this cross-connection.rw AtmVorXAdminStatus (ATM-TC-MIB) .1.3.6.1.4.1.4323.2.9.1.2.1.7 |
qbVTVCCrossConnOperStatusThe current operational status of the connection.ro AtmVorXOperStatus (ATM-TC-MIB) .1.3.6.1.4.1.4323.2.9.1.2.1.8 |
qbVTVCCrossConnKindThe VT connection type. Two types of connection can be provisioned on the VT-VT and VC-VC.rw QbPvcConnKind (QB-DWS-MIB) .1.3.6.1.4.1.4323.2.9.1.2.1.9 |
qbVTVCCrossConnRowStatusThe status column for this IOT ENET interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) This object may only be set to createAndGo(4). Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to createAndGo(4) causes the agent to attempt to create and commit a row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptable to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to destroy(6) will remove the corresponding entry in this table, and disable data traffic.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4323.2.9.1.2.1.10 |
qbVTConfTableThe Quantum Bridge VT configuration table contains configuration parameters of tributaries at OAS VT155 interfaces. The STS-3 interfaces of D155VT cards that are listed in the sonetMediumTable(RFC2558) as interfaces with the 'sonetMediumType' object set to sonet(1). The table has two indexes: Sonet interface index, and tributary identifier. SEQUENCE OF QbVTConfEntry .1.3.6.1.4.1.4323.2.9.1.3 |
qbVTConfEntryAn entry in the Quantum Bridge qbVTConfEntry. Every entry containes settings of the tributary QbVTConfEntry .1.3.6.1.4.1.4323.2.9.1.3.1 |
qbVTConfIfIndexThe STS-3/SDH-1 Sonet interface of the specified tributary. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4323.2.9.1.3.1.1 |
qbVTConfVTIdThe identifier of the specified tributary. QbVT15VTId .1.3.6.1.4.1.4323.2.9.1.3.1.2 |
qbVTConfClockModeThe object defines whether VT155 service clocking mode used for AAL1 recovery. Applies only to D155VT interfaces that are configured for SONET format.rw Enumeration .1.3.6.1.4.1.4323.2.9.1.3.1.3 |
qbVTConfActionIndicates whether the clock mode is set for a single tributary or group of tributaries. When set to 'singleVTAction(1)' a single selected tributary is set to a desired clock mode. When set to 'stsVTAction(2)' all tributaries that belongs to qbVTConfVTId's STS are set to a desired clock mode. When set to 'ifVTAction(3)' all qbVTConfIfIndex tributaries are set to a desired clock mode. For this mode the value of qbVTConfVTId is irrelevant. Thus any valid QbVT15VTId value can be used. When the value is set to 'noop', no operation is performed. When read, this object always returns the value noop(4).rw Enumeration .1.3.6.1.4.1.4323.2.9.1.3.1.4 |
qbVtVcStatsTableThis table contains the stats for each VT/VC with a connection established. One row in this table should exist for each VT/VC connection. SEQUENCE OF QbVtVcStatsEntry .1.3.6.1.4.1.4323.2.9.1.4 |
qbVtVcStatsEntryAn entry in the Quantum Bridge qbVtVcStatsTable table. QbVtVcStatsEntry .1.3.6.1.4.1.4323.2.9.1.4.1 |
qbVtVcStatsIfIndexThe STS-3/SDH-1 signal interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4323.2.9.1.4.1.1 |
qbVtVcStatsConnIdThe identifier of the specified VT (virtual tributary) or VC signal. The VT identifier is determined by using the following formula: (sts-1) * 28 + (vtgrp-1) * 4 + vtnum. sts-sonet path, vtgrp - sonet path group, vt - VT number.The VC identifier has ranges from 1 to 63. INTEGER .1.3.6.1.4.1.4323.2.9.1.4.1.2 |
qbVtVcStatsRxCellsThe number of received cells.ro Counter32 .1.3.6.1.4.1.4323.2.9.1.4.1.3 |
qbVtVcStatsTxCellsThe number of transmitted cells.ro Counter32 .1.3.6.1.4.1.4323.2.9.1.4.1.4 |
qbVtVcStatsRxDroppedCellsThe number of received cells that were dropped.ro Counter32 .1.3.6.1.4.1.4323.2.9.1.4.1.5 |
qbVtVcStatsTxConditionalCellsThe number of transmitted conditional cells.ro Counter32 .1.3.6.1.4.1.4323.2.9.1.4.1.6 |
qbVtVcStatsTxSuppressedCellsThe number of transmitted supressed cells.ro Counter32 .1.3.6.1.4.1.4323.2.9.1.4.1.7 |
qbVTVCNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.9.2 |
qbVTVCNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.9.2.0 |
qbVTVCConnOperStatusChangeA notification indicates that a VT15 connection has chaged the operations status. The notification is originated for every connection which is listed in the qbVTVCConnTable when its the qbVTVCConnOperStatus object changed state. NOTIFICATION-TYPE .1.3.6.1.4.1.4323.2.9.2.0.1 |
qbVTVCCrossConnOperStatusChangeA notification indicates that a VT15 cross-connection has chaged the operations status. The notification is originated for every connection which is listed in the qbVT15CrossConnTable when its the qbVTVCCrossConnOperStatus object changed state. NOTIFICATION-TYPE .1.3.6.1.4.1.4323.2.9.2.0.2 |
qbVTVCConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.9.3 |
qbVTVCCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.9.3.1 |
qbVTVCComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.4323.2.9.3.1.1 |
qbVTVCGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4323.2.9.3.2 |
qbVTVCConnInfoThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.4323.2.9.3.2.1 |
qbVTVCCrossConnInfoThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.4323.2.9.3.2.2 |