PAIRGAIN-IISP-MIB
AI MIB Summary
The PAIRGAIN-IISP-MIB module enables SNMP-based monitoring and configuration of routing protocols and interface states on PairGain IISP (Integrated Internet Service Provider) gateway devices. It provides granular visibility into IISP-specific routing tables, session establishment metrics, and protocol state transitions for network troubleshooting and policy enforcement.
Initial version of the MIB for monitoring and controlling IISP routing.
Main OID:
pgIISP.1.3.6.1.4.1.927.1.9.13.1
25
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
pgIISPInitial version of the MIB for monitoring and controlling
IISP routing. MODULE-IDENTITY .1.3.6.1.4.1.927.1.9.13.1 |
pgIISPMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.927.1.9.13.1.1 |
pgIISPRouteAddrIndexNextThis object contains an appropriate value to
be used for pgIISPRouteAddrIndex when creating
entries in the pgIISPRouteAddrTable. The value
0 indicates that no unassigned entries are
available. To obtain the atmVcCrossConnectIndex
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.
After a manager retrieves a value the agent will
determine through its local policy when this index
value will be made available for reuse.ro INTEGER .1.3.6.1.4.1.927.1.9.13.1.1.1 |
pgIISPRouteAddrTableA table containing all the attributes necessary to
determine what the entity believes is reachable in
terms of ATM End System Addresses and to determine which
nodes are advertising this reachability. This table is
also used to configure static routes to reachable address
prefixes. The local node index that received the
reachability information, reachable address, address prefix
length, and an index that distinguishes between multiple
listings of connectivity to a given address prefix from a
given local node are combined to form an instance ID for
this object.. SEQUENCE OF PgIISPRouteAddrEntry .1.3.6.1.4.1.927.1.9.13.1.1.2 |
pgIISPRouteAddrEntryAn entry in the table, containing information about a
reachable address prefix. PgIISPRouteAddrEntry .1.3.6.1.4.1.927.1.9.13.1.1.2.1 |
pgIISPRouteAddrIndexAn index into the set of listings of connectivity to a
given route.ro Integer32 .1.3.6.1.4.1.927.1.9.13.1.1.2.1.1 |
pgIISPRouteAddrRowStatusTo create, delete, activate and de-activate a reachable
address prefix.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.927.1.9.13.1.1.2.1.2 |
pgIISPRouteAddrAddressThe value of the ATM End System Address prefix.ro PgAtmAddrPrefix .1.3.6.1.4.1.927.1.9.13.1.1.2.1.3 |
pgIISPRouteAddrPrefixLengthThe prefix length to be applied to the ATM End System
Address prefix.ro PgAtmPrefixLength .1.3.6.1.4.1.927.1.9.13.1.1.2.1.4 |
pgIISPRouteAddrIfIndexThe local interface over which the reachable address can be
reached. The value zero indicates an unknown interface or
reachability through a remote node.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.927.1.9.13.1.1.2.1.5 |
pgIISPRouteAddrTypeThe type (e.g. internal or exterior) of reachability from
the advertising node to the address prefix.
Reject(2) refers to an address prefix which, if matched,
indicates that the message should be discarded as
unreachable. This is used in some protocols as a means of
correctly aggregating routes.rw Enumeration .1.3.6.1.4.1.927.1.9.13.1.1.2.1.6 |
pgIISPRouteAddrAdminStatusIndicates whether the route is configured to be used.rw Enumeration .1.3.6.1.4.1.927.1.9.13.1.1.2.1.7 |
pgIISPRouteAddrOperStatusIndicates whether the reachable address prefix is
operationally valid and whether it is being advertised by
this node.rw Enumeration .1.3.6.1.4.1.927.1.9.13.1.1.2.1.8 |
pgIISPRouteAddrTimeStampIndicates when the connectivity from the advertising node
to the reachable address prefix became known to the local
node.rw TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.927.1.9.13.1.1.2.1.9 |
pgIISPNetPrefixIndexNextThis object contains an appropriate value to
be used for pgIISPRouteAddrIndex when creating
entries in the pgIISPRouteAddrTable. The value
0 indicates that no unassigned entries are
available. To obtain the atmVcCrossConnectIndex
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.
After a manager retrieves a value the agent will
determine through its local policy when this index
value will be made available for reuse.ro INTEGER .1.3.6.1.4.1.927.1.9.13.1.1.3 |
pgIISPNetPrefixTableA table implemented by the user-side, containing the
network-prefix(es) for ATM-layer addresses in effect on
the user side of the UNI. SEQUENCE OF PgIISPNetPrefixEntry .1.3.6.1.4.1.927.1.9.13.1.1.4 |
pgIISPNetPrefixEntryInformation about a single network-prefix for
ATM-layer addresses in effect on the user-side.
Note that the index variable atmNetPrefixPrefix is a
variable-length string, and as such the rule for
variable-length strings in section 4.1.6 of RFC 1212
applies. PgIISPNetPrefixEntry .1.3.6.1.4.1.927.1.9.13.1.1.4.1 |
pgIISPNetPrefixIndexAn index into the set of listings of connectivity to a
given address prefix.ro Integer32 .1.3.6.1.4.1.927.1.9.13.1.1.4.1.1 |
pgIISPNetPrefixRowStatusTo create, delete, activate and de-activate a net prefix entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.927.1.9.13.1.1.4.1.2 |
pgIISPNetPrefixPortA unique value which identifies the UNI port for
which the network prefix for ATM addresses is in
effect. The value of 0 has the special meaning of
identifying the local UNI.ro INTEGER .1.3.6.1.4.1.927.1.9.13.1.1.4.1.3 |
pgIISPNetPrefixPrefixThe network prefix for ATM addresses which is in
effect on the user side of the ATM UNI port.ro NetPrefix .1.3.6.1.4.1.927.1.9.13.1.1.4.1.4 |
pgIISPNetPrefixFormatATM address format.rw Enumeration .1.3.6.1.4.1.927.1.9.13.1.1.4.1.5 |
pgIISPNetPrefixLengthThe number of bits that are significant in an ATM address
prefix used.rw Integer32 .1.3.6.1.4.1.927.1.9.13.1.1.4.1.6 |
pgIISPNetPrefixStatusAn indication of the validity of the network prefix
for ATM addresses on the user side of the UNI port.
To configure a new network prefix in this table, the
network-side must set the appropriate instance of this
object to the value valid(1). To delete an existing
network prefix in this table, the network-side must
set the appropriate instance of this object to the
value invalid(2).
If circumstances occur on the user-side which cause a
prefix to become invalid, the user-side modifies the
value of the appropriate instance of this object to invalid(2).
Whenever the value of this object for a particular
prefix becomes invalid(2), the conceptual row for that
prefix may be removed from the table at any time,
either immediately or subsequently.rw Enumeration .1.3.6.1.4.1.927.1.9.13.1.1.4.1.7 |
pgIISPAtmAddrPrefixThe identifier assigned by a service provider.
This ATM address prefix is used by more than one line cards
in the Avidia.rw AtmAddr (ATM-TC-MIB) .1.3.6.1.4.1.927.1.9.13.1.1.5 |