OPTIX-SONET-LPBK-MIB-V2
This module describes the Loopback interface of Huawei SONET transmit platform
Main OID:
optixSonetMaintenance.1.3.6.1.4.1.2011.2.25.3.20.50
26
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
optixSonetMaintenanceThis module describes the Loopback interface of Huawei SONET transmit platform MODULE-IDENTITY .1.3.6.1.4.1.2011.2.25.3.20.50 |
optixSonetLoopback OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.25.3.20.50.10 |
lpbkStateTableLoopback state table SEQUENCE OF LpbkStateEntry .1.3.6.1.4.1.2011.2.25.3.20.50.10.10 |
lpbkStateEntryLoopback state entry LpbkStateEntry .1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1 |
lpbkStateMOD2The modifier that identifies the type of the facilityro MOD2Type (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.1 |
lpbkStateSlotSlot number. This will indicate what is the slot of the object.ro Gauge32 .1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.2 |
lpbkStatePortPort Number. This will indicate what is the Port of the object.ro Gauge32 .1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.3 |
lpbkStatePathPath number. This will indicate what is the Path of the object.ro Gauge32 .1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.4 |
lpbkStateVTVT path number. This will indicate what is the VT path of the object.ro Gauge32 .1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.5 |
lpbkStateLpbkTypeThe loopback type of the facilityro LpbkType .1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.6 |
lpbkStateTimeoutThe remnant time that loop-back will be released.ro Gauge32 .1.3.6.1.4.1.2011.2.25.3.20.50.10.10.1.7 |
lpbkFlagTableLoopback Enable table SEQUENCE OF LpbkFlagEntry .1.3.6.1.4.1.2011.2.25.3.20.50.10.20 |
lpbkFlagEntryLoopback Enable entry LpbkFlagEntry .1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1 |
lpbkFlagMOD2The modifier that identifies the type of the facilityro MOD2Type (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.1 |
lpbkFlagSlotSlot number. This will indicate what is the slot of the object.ro Gauge32 .1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.2 |
lpbkFlagPortPort Number. This will indicate what is the Port of the object.ro Gauge32 .1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.3 |
lpbkFlagPathPath number. This will indicate what is the Path of the object.ro Gauge32 .1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.4 |
lpbkFlagVTVT path number. This will indicate what is the VT path of the object.ro Gauge32 .1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.5 |
lpbkFlagLpbkTypeThe loopback type of the facilityro LpbkType .1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.6 |
lpbkFlagEnFlagT1 or T3 remote loop-back enable flagro Enumeration .1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.7 |
lpbkFlagTimeoutThe automatic release time of loopback.ro Gauge32 .1.3.6.1.4.1.2011.2.25.3.20.50.10.20.1.8 |
optixSonetMaintenanceConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.25.3.20.50.11 |
optixSonetMaintenanceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.25.3.20.50.11.1 |
currentObjectGroupEnter the description of the created OBJECT-GROUP. Unknown .1.3.6.1.4.1.2011.2.25.3.20.50.11.1.1 |
optixSonetMaintenanceCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.25.3.20.50.11.2 |
basicComplianceEnter the description of the created MODULE-COMPLIANCE. Unknown .1.3.6.1.4.1.2011.2.25.3.20.50.11.2.1 |