OPTIX-SONET-ALM-MIB
The OPTIX-SONET-ALM-MIB monitors optical transport network alarms and performance degradation events on Huawei OptiX SONET/SDH transmission equipment. It provides real-time visibility into critical SONET-specific fault indicators, including signal loss, frame alignment errors, and bit error rate thresholds.
Imported Objects
Objects
47 total| Object Name |
|---|
optixSonetAlarmDescription. MODULE-IDENTITY .1.3.6.1.4.1.2011.2.25.3.20.10 |
almData OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.25.3.20.10.10 |
almDataTableAlarm data table SEQUENCE OF AlmDataEntry .1.3.6.1.4.1.2011.2.25.3.20.10.10.10 |
almDataEntryAlarm data table AlmDataEntry .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1 |
almDataMOD2Signal mode.ro MOD2Type (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.1 |
almDataSlotSlot number. This will indicate what is the slot of the object which raised this alarm. If not relevant to the alarm, will be zero.ro Unsigned32 .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.2 |
almDataPortPort Number. This will indicate what is the Port of the object which raised this alarm. If not relevant to the alarm, will be zero.ro Unsigned32 .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.3 |
almDataPathPath number. This will indicate what is the Path of the object which raised this alarm. If not relevant to the alarm, will be zero.ro Unsigned32 .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.4 |
almDataVTVT path number. This will indicate what is the VT path of the object which raised this alarm. If not relevant to the alarm, will be zero.ro Unsigned32 .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.5 |
almDataNtfcnCdeThe notification code of the retrieved alarm. Only CR|MJ|MN will be represented here.ro AlmDataNtfcnCdeType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.6 |
almDataNameAlarm name.ro AlarmEventType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.7 |
almDataSrvEffThe effect on service caused by the alarm condition. Only NSA(Nonservice-effecting)|SA(Service-effecting) will be represented here.ro AlmDataSrvEffType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.8 |
almDataLocationAlarm location. Only NEND(Near end)|FEND(Far end)|ALL will be represented here.ro LocationType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.9 |
almDataDirectionAlarm direction. Only RCV(Receive direction)|TRMT(Transmit direction)|ALL will be represented here.ro DirectionType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.10 |
almDataDateTimeAlarm date and time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.11 |
almDataDescText message.ro OCTET STRING .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.12 |
almDataAiddetSupplementary equipment identification.ro Unsigned32 .1.3.6.1.4.1.2011.2.25.3.20.10.10.10.1.13 |
condDataTableMOD2 condition table. SEQUENCE OF CondDataEntry .1.3.6.1.4.1.2011.2.25.3.20.10.10.20 |
condDataEntryMOD2 condition table. CondDataEntry .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1 |
condDataMOD2Signal mode.ro MOD2Type (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.1 |
condDataSlotSlot number. This will indicate what is the slot of the object which raised this alarm. If not relevant to the alarm, will be zero.ro Unsigned32 .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.2 |
condDataPortPort number. This will indicate what is the Port of the object which raised this alarm. If not relevant to the alarm, will be zero.ro Unsigned32 .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.3 |
condDataPathPath number.ro Unsigned32 .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.4 |
condDataVTVT path number. This will indicate what is the VT path of the object which raised this alarm. If not relevant to the alarm, will be zero.ro Unsigned32 .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.5 |
condDataNameCondition name.ro AlarmEventType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.6 |
condDataLocationAlarm location. Only NEND(Near end)|FEND(Far end)|ALL will be represented here.ro LocationType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.7 |
condDataDirectionAlarm direction. Only RCV(Receive direction)|TRMT(Transmit direction)|ALL will be represented here.ro DirectionType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.8 |
condDataNtfcnCdeThe notification code of the retrieved alarm. Only NA|NR will be represented here.ro AlmDataNtfcnCdeType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.9 |
condDataSrvEffThe effect on service caused by the alarm condition. Only NSA(Nonservice-effecting)|SA(Service-effecting) will be represented here.ro AlmDataSrvEffType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.10 |
condDataDateTimeDate and time when the triggering event occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.11 |
condDataDescText message.ro OCTET STRING .1.3.6.1.4.1.2011.2.25.3.20.10.10.20.1.12 |
almEnvDataTableenvironment alarm table SEQUENCE OF AlmEnvDataEntry .1.3.6.1.4.1.2011.2.25.3.20.10.10.30 |
almEnvDataEntryenvironment alarm table AlmEnvDataEntry .1.3.6.1.4.1.2011.2.25.3.20.10.10.30.1 |
almEnvDataAidAID of the input switch for environment monitoring.ro Unsigned32 .1.3.6.1.4.1.2011.2.25.3.20.10.10.30.1.1 |
almEnvDataNtfcnCdeThe notification code of the retrieved alarm. Only CR|MJ|MN|NA will be represented here.ro AlmDataNtfcnCdeType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.30.1.2 |
almEnvDataNameCondition type.ro AlarmEventType (OPTIX-SONET-TC-MIB) .1.3.6.1.4.1.2011.2.25.3.20.10.10.30.1.3 |
almEnvDataDateTimeDate and time when the triggering event occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.2.25.3.20.10.10.30.1.4 |
almEnvDataCondDescText message.ro OCTET STRING .1.3.6.1.4.1.2011.2.25.3.20.10.10.30.1.5 |
almSummary OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.25.3.20.10.11 |
almSummaryCriticalCritical alarm count.ro INTEGER .1.3.6.1.4.1.2011.2.25.3.20.10.11.10 |
almSummaryMajorMajor alarm count.ro INTEGER .1.3.6.1.4.1.2011.2.25.3.20.10.11.20 |
almSummaryMinorMinor alarm count.ro INTEGER .1.3.6.1.4.1.2011.2.25.3.20.10.11.30 |
optixSonetAlarmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.25.3.20.10.20 |
optixSonetAlarmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.25.3.20.10.20.1 |
optixSonetAlarmObjectGroupEnter the description of the created OBJECT-GROUP. Unknown .1.3.6.1.4.1.2011.2.25.3.20.10.20.1.1 |
optixSonetAlarmCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.25.3.20.10.20.2 |
optixSonetAlarmBasicComplianceEnter the description of the created MODULE-COMPLIANCE. Unknown .1.3.6.1.4.1.2011.2.25.3.20.10.20.2.1 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.