OCTOPUSE-MIB
Octopus E MIB.
Main OID:
octopusE.1.3.6.1.4.1.231.7.2.9
104
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
104 total| Object Name |
|---|
sni OBJECT IDENTIFIER .1.3.6.1.4.1.231 |
siemensUnits OBJECT IDENTIFIER .1.3.6.1.4.1.231.7 |
pn OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.2 |
octopusEOctopus E MIB. MODULE-IDENTITY .1.3.6.1.4.1.231.7.2.9 |
octoControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.2.9.1 |
octoSysStateThe actual error state of the Octopus E PABX. Contains the highest severity level of the recent error events. This object is updated automatically, but it can also be modified manually.rw Enumeration .1.3.6.1.4.1.231.7.2.9.1.1 |
tftpSwitchoverDateTimeDate and time for the switchover to the new system software. The configured time will be ignored, if the upgrade is started with the downloadAndImmediateSwitchover define of the tftpDownloadAction object. octet format: field octets contents range hex (range dez) ----- ------ -------- --------- ---------- 1 1-2 year 00 00 - FF FF (0 - 65536) 2 3 month 01 - 0C (1 - 12) 3 4 day 01 - 1F (1 - 31) 4 5 hour 00 - 17 (0 - 23) 5 6 minutes 00 - 3B (0 - 59) 6 7 seconds 00 - 3B (0 - 60) 7 8 deci-seconds 00 - 09 (0 - 9) For example, to configure Wednesday June 16, 1999 at 8:30:15 AM would be configured as 07 cf 06 10 08 1E 0F 00rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.231.7.2.9.1.2 |
tftpDownloadActionWhen this object is set to downloadAndImmediateSwitchover (2), the device will download the new software from the configured host. After the download is finished, the device will automatically restart with the new software. If downloadAndDelayedSwitchover (3) is specified, the new image is copied to the device. When the tftpDateTime value is matched, the device discontinues its normal operation and does the software switchover. After an automatic reset, it starts with the new system software. Setting downloadWithoutSwitchover (4) initiates a download without switching over to the new software. When the device is not downloading, this object will have a value of notDownloading(1).rw Enumeration .1.3.6.1.4.1.231.7.2.9.1.3 |
octoResetControlSetting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. When the device is running normally, this variable has a value of running(1). The effect of configuring this object is identical to the configuration of the probeResetControl object of RFC 2021, except for the coldBoot option which is not supported.rw Enumeration .1.3.6.1.4.1.231.7.2.9.1.4 |
octoSwitchoverStateThe values readyForSwitchover (1) and notReadyForSwitchover (2) indicate whether the system is ready to be switched over to the new software that was downloaded to the shadow flash area, or not. If it is not passible, octoShadowFlashState gives details on the reason. Setting this object to switchoverNow (3) causes the device to switchover immediately to the new software which was downloaded to the shadow flash area before and restart the system. initSwitchoverDelayed(4) causes a delayed switchover.rw Enumeration .1.3.6.1.4.1.231.7.2.9.1.5 |
octoShadowFlashStateThis object informs about the state of the shadow flash memory area which is used to buffer a new software image that is being downloaded to the system. A download is only possible when the state is flashDeleted (1). It is not possible to download if the state is flashNotDeleted(2), nor if it's flashWriteProtected(3) (this means it is internally locked by software because the system is not in the state of accepting new flash data). If the flash memory is smaller than 8 MB ( flashTooSmall(4) ), no transfer is possible, too. It is possible to delete an inactive software image from the shadow flash area by setting deleteFlashNow (5).rw Enumeration .1.3.6.1.4.1.231.7.2.9.1.6 |
octoLoadLevelThe actual CPU load level (per cent).ro INTEGER .1.3.6.1.4.1.231.7.2.9.1.7 |
octoTrapRepetitionsThe number of trap repetitions for error events marked as very important (log-and-multiple-trap).rw INTEGER .1.3.6.1.4.1.231.7.2.9.1.8 |
octoCdrBufferStateUse this object to delete the CDR buffer.rw Enumeration .1.3.6.1.4.1.231.7.2.9.1.9 |
octoLogBufferStateUse this object to delete the log data.rw Enumeration .1.3.6.1.4.1.231.7.2.9.1.10 |
octoErrorHistoryGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.2.9.2 |
numberOfErrorHistoryEntriesContains the number of errors to be found in the error history table. This value can be used to delete the last x entries (reduce value by x) or to delete all entries (value = 0).rw INTEGER .1.3.6.1.4.1.231.7.2.9.2.1 |
octoErrorHistoryTableThis table contains information about the errors that occured. SEQUENCE OF OctoErrorHistoryEntry .1.3.6.1.4.1.231.7.2.9.2.2 |
octoErrorHistoryEntryThe trap history table entries. OctoErrorHistoryEntry .1.3.6.1.4.1.231.7.2.9.2.2.1 |
octoErrorIndexIdentification of an table entry enabled by this index.ro INTEGER .1.3.6.1.4.1.231.7.2.9.2.2.1.1 |
octoErrorDateTimeTime, when the error occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.231.7.2.9.2.2.1.2 |
octoErrorClassContains the error class number (type of trap).ro INTEGER .1.3.6.1.4.1.231.7.2.9.2.2.1.3 |
octoErrorCodeContains the error code.ro INTEGER .1.3.6.1.4.1.231.7.2.9.2.2.1.4 |
octoAccessSlotContains the access slot for the error.ro INTEGER .1.3.6.1.4.1.231.7.2.9.2.2.1.5 |
octoAccessPortContains the local access port of the error. Local means that port numbering starts with 0 for each card.ro INTEGER .1.3.6.1.4.1.231.7.2.9.2.2.1.6 |
octoErrorDescriptionDetailed information about errors.ro DisplayString .1.3.6.1.4.1.231.7.2.9.2.2.1.7 |
octoErrorSeverityContains the severity of the specific error.ro Enumeration .1.3.6.1.4.1.231.7.2.9.2.2.1.8 |
octoSystemInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.2.9.3 |
sysHardwareVersionContains the version string of the system hardware.ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.1 |
sysSoftwareVersionContains the version string of the system software.ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.2 |
sysCodeNumberContains the code number of the system software.ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.3 |
sysSoftwareLocationContains location (address space) where the system software is currently running.ro Enumeration .1.3.6.1.4.1.231.7.2.9.3.4 |
numberOfSlotTableEntriesContains the number of entries in the slot table.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.5 |
octoSlotTableThis table contains information about the system slots. SEQUENCE OF OctoSlotTableEntry .1.3.6.1.4.1.231.7.2.9.3.6 |
octoSlotTableEntryThe slot table entries. OctoSlotTableEntry .1.3.6.1.4.1.231.7.2.9.3.6.1 |
cardIndexIdentification of an table entry enabled by this index.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.6.1.1 |
cardBoxNumIndex of the box where the card is placed.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.6.1.2 |
cardSlotNumIndex of the slot where the card is placed.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.6.1.3 |
cardTypeCode for the type of the card.ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.6.1.4 |
cardDescriptionTextual card description.ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.6.1.5 |
cardCodeNumberContains the code number of the card software.ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.6.1.6 |
cardStateContains the state of the card.ro Enumeration .1.3.6.1.4.1.231.7.2.9.3.6.1.7 |
numberOfPortTableEntriesContains the number of entries in the port table.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.7 |
octoPortTableThis table contains information about the system ports. SEQUENCE OF OctoPortTableEntry .1.3.6.1.4.1.231.7.2.9.3.8 |
octoPortTableEntryThe port table entries. OctoPortTableEntry .1.3.6.1.4.1.231.7.2.9.3.8.1 |
portIndexIdentification of an table entry enabled by this index.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.8.1.1 |
portCardIndexReference to the card the port is assigned to.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.8.1.2 |
portTypeContains the type of the port.ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.8.1.3 |
portStateContains the general state of the port.ro Enumeration .1.3.6.1.4.1.231.7.2.9.3.8.1.4 |
portLockThis object contains the lock state of the port. A software lock can be enabled / disabled. Possible state transitions: unlocked -> lockedBySoftware lockedByHardware -> lockedBySoftAndHardware lockedBySoftware -> unlocked lockedBySoftAndHardware -> lockedByHardwarerw Enumeration .1.3.6.1.4.1.231.7.2.9.3.8.1.5 |
numberOfExtensionTableEntriesContains the number of entries in the hardware extension table.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.9 |
octoExtensionTableThis table contains information about the hardware extensions. SEQUENCE OF OctoExtensionTableEntry .1.3.6.1.4.1.231.7.2.9.3.10 |
octoExtensionTableEntryThe extension table entries. OctoExtensionTableEntry .1.3.6.1.4.1.231.7.2.9.3.10.1 |
extensionIndexIdentification of an table entry enabled by this index.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.10.1.1 |
extensionDescriptionContains a textual desription of the hardware extension.ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.10.1.2 |
extensionCodeNumberContains the code number of the hardware extension.ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.10.1.3 |
numberOfLanConnTableEntriesContains the number of entries in the LAN connection table.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.11 |
octoLanConnTableThis table contains information about the interfaces available for LAN access of the device or its cards. SEQUENCE OF OctoLanConnTableEntry .1.3.6.1.4.1.231.7.2.9.3.12 |
octoLanConnTableEntryThe LAN connection table entries. OctoLanConnTableEntry .1.3.6.1.4.1.231.7.2.9.3.12.1 |
lanConnIndexIdentification of an table entry enabled by this index.ro INTEGER .1.3.6.1.4.1.231.7.2.9.3.12.1.1 |
lanConnDescriptionTextual desription on the LAN connection.ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.12.1.2 |
lanConnIpAddressIP address of the LAN connection.ro IpAddress .1.3.6.1.4.1.231.7.2.9.3.12.1.3 |
lanConnSubnetMaskSubnet mask of the LAN connection.ro IpAddress .1.3.6.1.4.1.231.7.2.9.3.12.1.4 |
lanConnStatusStatus of the LAN Connection.ro Enumeration .1.3.6.1.4.1.231.7.2.9.3.12.1.5 |
hiPathAllServeServerIpAddressIP address of the HiPath AllServe (Venus) server.ro IpAddress .1.3.6.1.4.1.231.7.2.9.3.13 |
indexOfLastPortStatusNotificationTrapIndex of last 'port status change' notification trap sent by the device. Note: only reset possible (0)rw INTEGER .1.3.6.1.4.1.231.7.2.9.3.14 |
sysSnmpAgentVersionVersion number of the systems SNMP agent (formatting: x.y.z.)ro DisplayString .1.3.6.1.4.1.231.7.2.9.3.15 |
octoStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.2.9.4 |
numberOfFeatureStatTableEntriesContains the number of feature counters to be found in the table.ro INTEGER .1.3.6.1.4.1.231.7.2.9.4.1 |
octoFeatureStatTableThis table contains information about the usage of specific system features. It is designed to monitor the use of these features for a limited time only, because each counter is limited to one byte. SEQUENCE OF OctoFeatureStatEntry .1.3.6.1.4.1.231.7.2.9.4.2 |
octoFeatureStatEntryThe feature statistics table entries. OctoFeatureStatEntry .1.3.6.1.4.1.231.7.2.9.4.2.1 |
featureIndexIdentification of an table entry enabled by this index.ro INTEGER .1.3.6.1.4.1.231.7.2.9.4.2.1.1 |
featureDescriptionDescription of the feature.ro DisplayString .1.3.6.1.4.1.231.7.2.9.4.2.1.2 |
featureCounterThis Counter indicates how often the feature was used since last system reloadro INTEGER .1.3.6.1.4.1.231.7.2.9.4.2.1.3 |
featureStatTableResetEnables reset (2) of all counters of the featureStatTable.rw Enumeration .1.3.6.1.4.1.231.7.2.9.4.3 |
octoCdrConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.2.9.5 |
octoCdrSeparatorSeparator between following CDRs: DOS mode (1): CRLF UNIX mode (2): LFrw Enumeration .1.3.6.1.4.1.231.7.2.9.5.1 |
octoCdrElementSeparatorSeparator between the different elements of one CDR: pipe (0x7c): '|' semicolon (0x3b): ';' blank (0x20): ' ' NOTE: no write access for blankrw Enumeration .1.3.6.1.4.1.231.7.2.9.5.2 |
octoCdrThresholdValueCDR buffer limit (only relevant for TFTP server mode): threshold value (in percent) for sending a CDR data notification trap recommended values: 0 to 80rw INTEGER .1.3.6.1.4.1.231.7.2.9.5.3 |
octoCdrTftpFileCounterCDR <FileCounter> (only relevant for TFTP client mode): For each transferred CDR-file a new filename is necassary filename: 'GDS<IPAdr>.c<FileCounter>'rw INTEGER .1.3.6.1.4.1.231.7.2.9.5.4 |
octoCdrTftpServerDestAddressDestination IP addresse of CDR TFTP server (only relevant for TFTP client mode)rw IpAddress .1.3.6.1.4.1.231.7.2.9.5.5 |
octoCdrTftpServerAlternateDestAddressAlternate destination IP addresse of CDR TFTP server (only relevant for TFTP client mode): is the CDR TFTP Server not reachable the switch transfers CDR data to this alternative serverrw IpAddress .1.3.6.1.4.1.231.7.2.9.5.6 |
octoCdrTftpClientTimercycle time in minutes for initiating CDR output, max value 1439 minutes (23hours,59minutes) (only relevant for TFTP client mode)rw INTEGER .1.3.6.1.4.1.231.7.2.9.5.7 |
octoCdrTcpServerDestAddressDestination IP addresse of CDR TCP server (only relevant for TCP client mode)rw IpAddress .1.3.6.1.4.1.231.7.2.9.5.8 |
octoCdrTcpServerDestPortDestination TCP port of CDR TCP server (only relevant for TCP client mode)rw INTEGER .1.3.6.1.4.1.231.7.2.9.5.9 |
octoCdrOutputModeCDR (Call Detailed Record) output mode: V24-Port (1): the device is permanently connected over a V.24 connection to an extern application and sends each CDR immidiatly NOTE: no write access UPN-Port (2): the device is permanently connected over terminal adapter (PPM) connection to an extern application and sends each CDR immidiatly NOTE: no write access PCVPL-Port (3): the device is permanently connected over a CorNet TS connection to an extern application (PCVPL) and sends each CDR immidiatly NOTE: no write access TFTP-Client (4): the device sends the collected CDRs to the administrated TFTP-Server TFTP-Server (5): an extern TFTP client can request the collected CDRs TCP-Client (6): the device is permanently connected to an extern TCP server and sends each CDR immidiatly NoOutput (7): no output for CDRrw Enumeration .1.3.6.1.4.1.231.7.2.9.5.10 |
octoIndexOfLastCdrNotificationTrapIndex of last CDR notification trap sent by the device Note: only reset possible (0)rw INTEGER .1.3.6.1.4.1.231.7.2.9.5.11 |
octoTypeOfLastCdrNotificationTrapType of last CDR notification trap sent by the device: (1) : error - CDR buffer overflow (2) : warning - CDR buffer is filled up over 80% (3) : notification - administrateable CDR buffer threshold is reached -> extern TFTP client has to get the collected CDRs (4) : warning - TCP Client couldnt reach administrated server (5) : warning - TFTP Client couldnt reach administrated server (6) : warning - TFTP Client couldnt reach administrated alternative serverro INTEGER .1.3.6.1.4.1.231.7.2.9.5.12 |
octoDescriptionOfLastCdrNotificationTrapTextual description of last CDR notification trap sent by the devicero DisplayString .1.3.6.1.4.1.231.7.2.9.5.13 |
octoTrapSpecifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.2.9.6 |
sendAlarmIf an error occurs, there will be checked if the errorClass is configured to trigger an immediate signalling. If so, a trap will be send to the management station containing the information shown above. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.2.9.6.1 |
sendCdrNotificationThe CDR notification trap is sent to trigger further actions by the management station, for instance download of CDR data. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.2.9.6.2 |
sendPortStatusNotificationThe 'port status change' notification trap is sent to trigger a polling of the port table by a management station. It indicates one or more changes in port states. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.2.9.6.3 |
octoNetworkGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.2.9.7 |
numberOfIpConnControlTableEntriesContains the number of ip connection control entries to be found in the table. Set this value to 0 to remove all connection control entries.rw INTEGER .1.3.6.1.4.1.231.7.2.9.7.1 |
ipConnControlTableThis table can be used to control manual or automatic (periodical) checks of important ip connections from the device to a limited number of ip counterparts using the feature 'local ping'. It also contains the result of this connection control service. SEQUENCE OF IpConnControlEntry .1.3.6.1.4.1.231.7.2.9.7.2 |
ipConnControlEntryThe ip connection control table entries. IpConnControlEntry .1.3.6.1.4.1.231.7.2.9.7.2.1 |
connControlIndexIdentification of an table entry enabled by this index.ro INTEGER .1.3.6.1.4.1.231.7.2.9.7.2.1.1 |
connPartnerIpAddressThis is a partner ip address of a ip connection to be supervised.rw IpAddress .1.3.6.1.4.1.231.7.2.9.7.2.1.2 |
connTimeoutTimeout (in ms) for the 'local ping' mechanism which is used to supervise ip connections.rw INTEGER .1.3.6.1.4.1.231.7.2.9.7.2.1.3 |
connRetriesNumber of retries for the 'local ping' mechanism which is used to supervise ip connections.rw INTEGER .1.3.6.1.4.1.231.7.2.9.7.2.1.4 |
connRetryTimerRetry timer (in ms) for the 'local ping' mechanism which is used to supervise ip connections.rw INTEGER .1.3.6.1.4.1.231.7.2.9.7.2.1.5 |
connResultThe result of the supervision of the given ip connection. disonnected vs. connected is the result of the last check, if supervision has been started. not_activated means that the supervision has not been started. The result is activated, if the check has started, but there's no result yet.ro Enumeration .1.3.6.1.4.1.231.7.2.9.7.2.1.6 |
connControlStateThis object is used to start/stop the supervision of ip connections.rw Enumeration .1.3.6.1.4.1.231.7.2.9.7.2.1.7 |