Nortel-MsCarrier-MscPassport-PorsAtmTrunksMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-PorsAtmTrunksMIB.
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
mscTrkPaAtm OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.60.4.3 |
mscTrkPaAtmRowStatusTableThis entry controls the addition and deletion of
mscTrkPaAtm components. SEQUENCE OF MscTrkPaAtmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.4.3.1 |
mscTrkPaAtmRowStatusEntryA single entry in the table represents a single
mscTrkPaAtm component. MscTrkPaAtmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.4.3.1.1 |
mscTrkPaAtmRowStatusThis variable is used as the basis for SNMP naming of
mscTrkPaAtm components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.4.3.1.1.1 |
mscTrkPaAtmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.4.3.1.1.2 |
mscTrkPaAtmStorageTypeThis variable represents the storage type value for the
mscTrkPaAtm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.4.3.1.1.4 |
mscTrkPaAtmIndexThis variable represents the index for the mscTrkPaAtm tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.60.4.3.1.1.10 |
mscTrkPaAtmProvTableThis group of attributes provides the parameters used by the
AtmAccess component for specifying access to an ATM interface. SEQUENCE OF MscTrkPaAtmProvEntry .1.3.6.1.4.1.562.36.2.1.60.4.3.10 |
mscTrkPaAtmProvEntryAn entry in the mscTrkPaAtmProvTable. MscTrkPaAtmProvEntry .1.3.6.1.4.1.562.36.2.1.60.4.3.10.1 |
mscTrkPaAtmAtmConnectionThis attribute specifies the component name of the ATM Virtual
Circuit that the AtmAccess component will use. The format of the
component name is AtmIf/n Vcc/x.y Neprw Link .1.3.6.1.4.1.562.36.2.1.60.4.3.10.1.1 |
mscTrkPaAtmModeThis attribute specifies the operating mode of the PathAdmin. When
set to multiplexing the PathAdmin to multiplex voice calls to the
given atmConnection using single cell per voice packet transport.
All other calls will be multiplexed using AAL5 over the Trunk's
VCC. When set to mapping the PathAdmin will allocate a VCC per
LCh/n. In mapping mode the atmConnection should not be set. The
VCC chosen for a given connection can be seen in the LCh
localConnection attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.60.4.3.10.1.2 |
porsAtmTrunksMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.137 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.137 |
porsAtmTrunksGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.137.1 |
porsAtmTrunksGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.137.1.1 |
porsAtmTrunksGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.137.1.1.3 |
porsAtmTrunksGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.137.1.1.3.2 |
porsAtmTrunksCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.137.3 |
porsAtmTrunksCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.137.3.1 |
porsAtmTrunksCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.137.3.1.3 |
porsAtmTrunksCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.137.3.1.3.2 |