Nortel-MsCarrier-MscPassport-TrunksMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-TrunksMIB.
189
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
189 total| Object Name |
|---|
mscTrk OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.60 |
mscTrkRowStatusTableThis entry controls the addition and deletion of
mscTrk components. SEQUENCE OF MscTrkRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.1 |
mscTrkRowStatusEntryA single entry in the table represents a single
mscTrk component. MscTrkRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.1.1 |
mscTrkRowStatusThis variable is used as the basis for SNMP naming of
mscTrk components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.1.1.1 |
mscTrkComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.1.1.2 |
mscTrkStorageTypeThis variable represents the storage type value for the
mscTrk tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.1.1.4 |
mscTrkIndexThis variable represents the index for the mscTrk tables. Integer32 .1.3.6.1.4.1.562.36.2.1.60.1.1.10 |
mscTrkPorsStats OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.60.6 |
mscTrkPorsStatsRowStatusTableThis entry controls the addition and deletion of
mscTrkPorsStats components. SEQUENCE OF MscTrkPorsStatsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.6.1 |
mscTrkPorsStatsRowStatusEntryA single entry in the table represents a single
mscTrkPorsStats component. MscTrkPorsStatsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.6.1.1 |
mscTrkPorsStatsRowStatusThis variable is used as the basis for SNMP naming of
mscTrkPorsStats components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.6.1.1.1 |
mscTrkPorsStatsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.6.1.1.2 |
mscTrkPorsStatsStorageTypeThis variable represents the storage type value for the
mscTrkPorsStats tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.6.1.1.4 |
mscTrkPorsStatsIndexThis variable represents the index for the mscTrkPorsStats tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.60.6.1.1.10 |
mscTrkPorsStatsOperTableThis operational group provides the PORS Trunks interrupting and
normal traffic statistics for operator console display. SEQUENCE OF MscTrkPorsStatsOperEntry .1.3.6.1.4.1.562.36.2.1.60.6.10 |
mscTrkPorsStatsOperEntryAn entry in the mscTrkPorsStatsOperTable. MscTrkPorsStatsOperEntry .1.3.6.1.4.1.562.36.2.1.60.6.10.1 |
mscTrkPorsStatsPorsNormPktFromIfThis attribute counts the number of normal priority packets received
on the PORS Trunk normal priority queue. This counter wraps
around to zero when the maximum value is exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.6.10.1.1 |
mscTrkPorsStatsPorsNormDiscUnforwardFromIfThis attribute counts the number of normal priority packets
discarded from the PORS Trunk normal priority queue. This
counter wraps around to zero when the maximum value is
exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.6.10.1.2 |
mscTrkPorsStatsPorsNormOctetFromIfThis attribute counts the number of normal priority bytes received
on the PORS Trunk normal priority queue.This counter wraps
around to zero when the maximum value is exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.6.10.1.3 |
mscTrkPorsStatsPorsIntPktFromIfThis attribute counts the number of interrupting priority packets
received on the PORS Trunk interrupting priority queue. This
counter wraps around to zero when the maximum value is
exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.6.10.1.4 |
mscTrkPorsStatsPorsIntDiscUnforwardFromIfThis attribute counts the number of interrupting priority packets
discarded from the PORS Trunk interrupting priority queue. This
counter wraps around to zero when the maximum value is
exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.6.10.1.5 |
mscTrkPorsStatsPorsIntOctetFromIfThis attribute counts the number of interrupting priority bytes
received on the PORS Trunk interrupting priority queue. This
counter wraps around to zero when the maximum value is
exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.6.10.1.6 |
mscTrkPorsStatsPktBpTableThis attribute counts the number of PORS packets received by the
Trunk. It is an array indexed by the emission priorities (ep0, ep1 and
ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets.
The highest emission priority is ep0 and the least discardable
priority is dp0. These counters wrap around to zero when the
maximum value is exceeded. SEQUENCE OF MscTrkPorsStatsPktBpEntry .1.3.6.1.4.1.562.36.2.1.60.6.371 |
mscTrkPorsStatsPktBpEntryAn entry in the mscTrkPorsStatsPktBpTable. MscTrkPorsStatsPktBpEntry .1.3.6.1.4.1.562.36.2.1.60.6.371.1 |
mscTrkPorsStatsPktBpEpIndexThis variable represents the next to last index for the
mscTrkPorsStatsPktBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.6.371.1.1 |
mscTrkPorsStatsPktBpDpIndexThis variable represents the final index for the
mscTrkPorsStatsPktBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.6.371.1.2 |
mscTrkPorsStatsPktBpValueThis variable represents an individual value for the
mscTrkPorsStatsPktBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.6.371.1.3 |
mscTrkPorsStatsDiscBpTableThis attribute counts the number of PORS packets received from the
remote module that have been discarded. It is an array indexed by
the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0,
dp1, dp2 and dp3) of the packets. The highest emission priority is
ep0 and the least discardable priority is dp0. These counters wrap
around to zero when the maximum value is exceeded. SEQUENCE OF MscTrkPorsStatsDiscBpEntry .1.3.6.1.4.1.562.36.2.1.60.6.372 |
mscTrkPorsStatsDiscBpEntryAn entry in the mscTrkPorsStatsDiscBpTable. MscTrkPorsStatsDiscBpEntry .1.3.6.1.4.1.562.36.2.1.60.6.372.1 |
mscTrkPorsStatsDiscBpEpIndexThis variable represents the next to last index for the
mscTrkPorsStatsDiscBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.6.372.1.1 |
mscTrkPorsStatsDiscBpDpIndexThis variable represents the final index for the
mscTrkPorsStatsDiscBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.6.372.1.2 |
mscTrkPorsStatsDiscBpValueThis variable represents an individual value for the
mscTrkPorsStatsDiscBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.6.372.1.3 |
mscTrkPorsStatsOctBpTableThis attribute counts the number of PORS octets received by the
Trunk. It is an array indexed by the emission priorities (ep0, ep1 and
ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets.
The highest emission priority is ep0 and the least discardable
priority is dp0. These counters wrap around to zero when the
maximum value is exceeded. SEQUENCE OF MscTrkPorsStatsOctBpEntry .1.3.6.1.4.1.562.36.2.1.60.6.373 |
mscTrkPorsStatsOctBpEntryAn entry in the mscTrkPorsStatsOctBpTable. MscTrkPorsStatsOctBpEntry .1.3.6.1.4.1.562.36.2.1.60.6.373.1 |
mscTrkPorsStatsOctBpEpIndexThis variable represents the next to last index for the
mscTrkPorsStatsOctBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.6.373.1.1 |
mscTrkPorsStatsOctBpDpIndexThis variable represents the final index for the
mscTrkPorsStatsOctBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.6.373.1.2 |
mscTrkPorsStatsOctBpValueThis variable represents an individual value for the
mscTrkPorsStatsOctBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.6.373.1.3 |
mscTrkFwdStats OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.60.7 |
mscTrkFwdStatsRowStatusTableThis entry controls the addition and deletion of
mscTrkFwdStats components. SEQUENCE OF MscTrkFwdStatsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.7.1 |
mscTrkFwdStatsRowStatusEntryA single entry in the table represents a single
mscTrkFwdStats component. MscTrkFwdStatsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.7.1.1 |
mscTrkFwdStatsRowStatusThis variable is used as the basis for SNMP naming of
mscTrkFwdStats components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.7.1.1.1 |
mscTrkFwdStatsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.7.1.1.2 |
mscTrkFwdStatsStorageTypeThis variable represents the storage type value for the
mscTrkFwdStats tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.7.1.1.4 |
mscTrkFwdStatsIndexThis variable represents the index for the mscTrkFwdStats tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.60.7.1.1.10 |
mscTrkFwdStatsOperTableThis operational group counts the Trunk or DpnGateway packet
forwarding traffic statistics for operator console display. SEQUENCE OF MscTrkFwdStatsOperEntry .1.3.6.1.4.1.562.36.2.1.60.7.10 |
mscTrkFwdStatsOperEntryAn entry in the mscTrkFwdStatsOperTable. MscTrkFwdStatsOperEntry .1.3.6.1.4.1.562.36.2.1.60.7.10.1 |
mscTrkFwdStatsFwdPktFromIfThis attribute counts the number of forwarding packets received by
the Trunk or DpnGateway. This counter wraps around to zero when
the maximum value is exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.7.10.1.1 |
mscTrkFwdStatsFwdDiscUnforwardFromIfThis attribute counts the number of forwarding packets discarded by
the Trunk or DpnGateway. This counter wraps around to zero when
the maximum value is exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.7.10.1.2 |
mscTrkFwdStatsFwdOctetFromIfThis attribute counts the number of forwarding bytes received by
the Trunk or DpnGateway. This counter wraps around to zero when
the maximum value is exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.7.10.1.3 |
mscTrkVnsStats OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.60.8 |
mscTrkVnsStatsRowStatusTableThis entry controls the addition and deletion of
mscTrkVnsStats components. SEQUENCE OF MscTrkVnsStatsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.8.1 |
mscTrkVnsStatsRowStatusEntryA single entry in the table represents a single
mscTrkVnsStats component. MscTrkVnsStatsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.8.1.1 |
mscTrkVnsStatsRowStatusThis variable is used as the basis for SNMP naming of
mscTrkVnsStats components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.8.1.1.1 |
mscTrkVnsStatsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.8.1.1.2 |
mscTrkVnsStatsStorageTypeThis variable represents the storage type value for the
mscTrkVnsStats tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.8.1.1.4 |
mscTrkVnsStatsIndexThis variable represents the index for the mscTrkVnsStats tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.60.8.1.1.10 |
mscTrkVnsStatsOperTableThis operational group counts the Trunk virtual network traffic
statistics for operator console display. SEQUENCE OF MscTrkVnsStatsOperEntry .1.3.6.1.4.1.562.36.2.1.60.8.10 |
mscTrkVnsStatsOperEntryAn entry in the mscTrkVnsStatsOperTable. MscTrkVnsStatsOperEntry .1.3.6.1.4.1.562.36.2.1.60.8.10.1 |
mscTrkVnsStatsVnsPktFromIfThis attribute counts the number of virtual network packets received
by a Trunk component handling virtual network traffic. This counter
wraps around to zero when the maximum value is exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.8.10.1.1 |
mscTrkVnsStatsVnsDiscUnforwardFromIfThis attribute counts the number of virtual network packets
discarded by a Trunk component handling virtual network traffic.
This counter wraps around to zero when the maximum value is
exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.8.10.1.2 |
mscTrkVnsStatsVnsOctetFromIfThis attribute counts the number of virtual network bytes received
by a Trunk component handling virtual network traffic. This counter
wraps around to zero when the maximum value is exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.8.10.1.3 |
mscTrkVnsStatsPktBpTableThis attribute counts the number of Virtual Network packets
received by the Trunk. It is an array indexed by the emission
priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2
and dp3) of the packets. The highest emission priority is ep0 and the
least discardable priority is dp0. These counters wrap around to zero
when the maximum value is exceeded. SEQUENCE OF MscTrkVnsStatsPktBpEntry .1.3.6.1.4.1.562.36.2.1.60.8.377 |
mscTrkVnsStatsPktBpEntryAn entry in the mscTrkVnsStatsPktBpTable. MscTrkVnsStatsPktBpEntry .1.3.6.1.4.1.562.36.2.1.60.8.377.1 |
mscTrkVnsStatsPktBpEpIndexThis variable represents the next to last index for the
mscTrkVnsStatsPktBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.8.377.1.1 |
mscTrkVnsStatsPktBpDpIndexThis variable represents the final index for the
mscTrkVnsStatsPktBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.8.377.1.2 |
mscTrkVnsStatsPktBpValueThis variable represents an individual value for the
mscTrkVnsStatsPktBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.8.377.1.3 |
mscTrkVnsStatsDiscBpTableThis attribute counts the number of Virtual Network packets
received from the remote module that have been discarded by the
Trunk. It is an array indexed by the emission priorities (ep0, ep1 and
ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets.
The highest emission priority is ep0 and the least discardable
priority is dp0. These counters wrap around to zero when the
maximum value is exceeded. SEQUENCE OF MscTrkVnsStatsDiscBpEntry .1.3.6.1.4.1.562.36.2.1.60.8.378 |
mscTrkVnsStatsDiscBpEntryAn entry in the mscTrkVnsStatsDiscBpTable. MscTrkVnsStatsDiscBpEntry .1.3.6.1.4.1.562.36.2.1.60.8.378.1 |
mscTrkVnsStatsDiscBpEpIndexThis variable represents the next to last index for the
mscTrkVnsStatsDiscBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.8.378.1.1 |
mscTrkVnsStatsDiscBpDpIndexThis variable represents the final index for the
mscTrkVnsStatsDiscBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.8.378.1.2 |
mscTrkVnsStatsDiscBpValueThis variable represents an individual value for the
mscTrkVnsStatsDiscBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.8.378.1.3 |
mscTrkVnsStatsOctBpTableThis attribute counts the number of Virtual Network octets received
by the Trunk. It is an array indexed by the emission priorities (ep0,
ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the
packets. The highest emission priority is ep0 and the least
discardable priority is dp0. These counters wrap around to zero
when the maximum value is exceeded. SEQUENCE OF MscTrkVnsStatsOctBpEntry .1.3.6.1.4.1.562.36.2.1.60.8.379 |
mscTrkVnsStatsOctBpEntryAn entry in the mscTrkVnsStatsOctBpTable. MscTrkVnsStatsOctBpEntry .1.3.6.1.4.1.562.36.2.1.60.8.379.1 |
mscTrkVnsStatsOctBpEpIndexThis variable represents the next to last index for the
mscTrkVnsStatsOctBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.8.379.1.1 |
mscTrkVnsStatsOctBpDpIndexThis variable represents the final index for the
mscTrkVnsStatsOctBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.8.379.1.2 |
mscTrkVnsStatsOctBpValueThis variable represents an individual value for the
mscTrkVnsStatsOctBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.8.379.1.3 |
mscTrkDprsStats OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.60.10 |
mscTrkDprsStatsRowStatusTableThis entry controls the addition and deletion of
mscTrkDprsStats components. SEQUENCE OF MscTrkDprsStatsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.10.1 |
mscTrkDprsStatsRowStatusEntryA single entry in the table represents a single
mscTrkDprsStats component. MscTrkDprsStatsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.10.1.1 |
mscTrkDprsStatsRowStatusThis variable is used as the basis for SNMP naming of
mscTrkDprsStats components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.10.1.1.1 |
mscTrkDprsStatsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.10.1.1.2 |
mscTrkDprsStatsStorageTypeThis variable represents the storage type value for the
mscTrkDprsStats tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.10.1.1.4 |
mscTrkDprsStatsIndexThis variable represents the index for the mscTrkDprsStats tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.60.10.1.1.10 |
mscTrkDprsStatsPktBpTableThis attribute counts the number of DPRS packets received by the
Trunk. It is an array indexed by the emission priorities (ep0, ep1 and
ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets.
The highest emission priority is ep0 and the least discardable
priority is dp0. These counters wrap around to zero when the
maximum value is exceeded. SEQUENCE OF MscTrkDprsStatsPktBpEntry .1.3.6.1.4.1.562.36.2.1.60.10.374 |
mscTrkDprsStatsPktBpEntryAn entry in the mscTrkDprsStatsPktBpTable. MscTrkDprsStatsPktBpEntry .1.3.6.1.4.1.562.36.2.1.60.10.374.1 |
mscTrkDprsStatsPktBpEpIndexThis variable represents the next to last index for the
mscTrkDprsStatsPktBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.10.374.1.1 |
mscTrkDprsStatsPktBpDpIndexThis variable represents the final index for the
mscTrkDprsStatsPktBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.10.374.1.2 |
mscTrkDprsStatsPktBpValueThis variable represents an individual value for the
mscTrkDprsStatsPktBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.10.374.1.3 |
mscTrkDprsStatsDiscBpTableThis attribute counts the number of DPRS packets received from the
remote module that have been discarded by the Trunk. It is an array
indexed by the emission priorities (ep0, ep1 and ep2) and discard
priorities (dp0, dp1, dp2 and dp3) of the packets. The highest
emission priority is ep0 and the least discardable priority is dp0.
These counters wrap around to zero when the maximum value is
exceeded. SEQUENCE OF MscTrkDprsStatsDiscBpEntry .1.3.6.1.4.1.562.36.2.1.60.10.375 |
mscTrkDprsStatsDiscBpEntryAn entry in the mscTrkDprsStatsDiscBpTable. MscTrkDprsStatsDiscBpEntry .1.3.6.1.4.1.562.36.2.1.60.10.375.1 |
mscTrkDprsStatsDiscBpEpIndexThis variable represents the next to last index for the
mscTrkDprsStatsDiscBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.10.375.1.1 |
mscTrkDprsStatsDiscBpDpIndexThis variable represents the final index for the
mscTrkDprsStatsDiscBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.10.375.1.2 |
mscTrkDprsStatsDiscBpValueThis variable represents an individual value for the
mscTrkDprsStatsDiscBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.10.375.1.3 |
mscTrkDprsStatsOctBpTableThis attribute counts the number of DPRS octets received by the
Trunk. It is an array indexed by the emission priorities (ep0, ep1 and
ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets.
The highest emission priority is ep0 and the least discardable
priority is dp0. These counters wrap around to zero when the
maximum value is exceeded. SEQUENCE OF MscTrkDprsStatsOctBpEntry .1.3.6.1.4.1.562.36.2.1.60.10.376 |
mscTrkDprsStatsOctBpEntryAn entry in the mscTrkDprsStatsOctBpTable. MscTrkDprsStatsOctBpEntry .1.3.6.1.4.1.562.36.2.1.60.10.376.1 |
mscTrkDprsStatsOctBpEpIndexThis variable represents the next to last index for the
mscTrkDprsStatsOctBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.10.376.1.1 |
mscTrkDprsStatsOctBpDpIndexThis variable represents the final index for the
mscTrkDprsStatsOctBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.10.376.1.2 |
mscTrkDprsStatsOctBpValueThis variable represents an individual value for the
mscTrkDprsStatsOctBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.10.376.1.3 |
mscTrkAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.60.11 |
mscTrkAddrRowStatusTableThis entry controls the addition and deletion of
mscTrkAddr components. SEQUENCE OF MscTrkAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.11.1 |
mscTrkAddrRowStatusEntryA single entry in the table represents a single
mscTrkAddr component. MscTrkAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.11.1.1 |
mscTrkAddrRowStatusThis variable is used as the basis for SNMP naming of
mscTrkAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.11.1.1.1 |
mscTrkAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.11.1.1.2 |
mscTrkAddrStorageTypeThis variable represents the storage type value for the
mscTrkAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.11.1.1.4 |
mscTrkAddrAddressIndexThis variable represents the index for the mscTrkAddr tables. AsciiStringIndex .1.3.6.1.4.1.562.36.2.1.60.11.1.1.10 |
mscTrkAddrProvTableThis group of attributes specifies the provisionable characteristics of
the TrkReachableAddress component. SEQUENCE OF MscTrkAddrProvEntry .1.3.6.1.4.1.562.36.2.1.60.11.10 |
mscTrkAddrProvEntryAn entry in the mscTrkAddrProvTable. MscTrkAddrProvEntry .1.3.6.1.4.1.562.36.2.1.60.11.10.1 |
mscTrkAddrCostThis attribute specifies a cost of using the trunk to reach a
destination or destinations described by TrkReachableAddress
component. The value is assigned by the network administrator to
represent the network cost of using this trunk. It can be related to
distance, speed, dollars, or any other factor that could be taken into
consideration.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.11.10.1.2 |
mscTrkIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscTrkIfEntryEntry .1.3.6.1.4.1.562.36.2.1.60.100 |
mscTrkIfEntryEntryAn entry in the mscTrkIfEntryTable. MscTrkIfEntryEntry .1.3.6.1.4.1.562.36.2.1.60.100.1 |
mscTrkIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.60.100.1.1 |
mscTrkIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.60.100.1.2 |
mscTrkProvTableThis group of attributes provides the parameters used by the layer 3
Trunk to Trunk staging protocol. SEQUENCE OF MscTrkProvEntry .1.3.6.1.4.1.562.36.2.1.60.101 |
mscTrkProvEntryAn entry in the mscTrkProvTable. MscTrkProvEntry .1.3.6.1.4.1.562.36.2.1.60.101.1 |
mscTrkExpectedRemoteNodeNameThis attribute specifies the expected node name of the module to
which this Trunk is connected. Once entered, the node name must
correspond to the Mod nodeName attribute of the remote node. The
Trunk end points exchange their node name through the Trunk
staging protocol. The staged value is validated and the
remoteValidationAction will be executed for those values not
matching the value supplied for this attribute.
If this attribute is an empty string, then the comparison is always
successful.rw AsciiString .1.3.6.1.4.1.562.36.2.1.60.101.1.1 |
mscTrkRemoteValidationActionThis attribute specifies the action to be taken if there is a mismatch
between the expectedRemoteNodeName attribute and the value
received from the remote end. The remoteValidationAction
determines the action when a value is supplied to the
expectedRemoteNodeName attribute. If this attribute is provisioned
to continue then upon an unsuccessful validation staging continues,
otherwise, if disable is set then the Trunk does not continue to stage
but, attempts to stage again after a one minute time out.
All unsuccessful validation when the expectedRemoteNodeName
has been set result in the generation of an alarm.rw Enumeration .1.3.6.1.4.1.562.36.2.1.60.101.1.2 |
mscTrkMaximumExpectedRoundTripDelayThis is the maximum round trip delay value used by the Trunk
staging protocol, in conjunction with measuredSpeedToIf, to
determine if it has taken too long to successfully stage with a
remote Trunk. The value specified must be larger than the
measuredRoundTripDelay or the Trunk may not successfully stage.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.101.1.3 |
mscTrkIdleTimeOutThis attribute specifies the Trunk protocol idle time out duration in
units of seconds. If the local Trunk does not receive any packets
from the link for the period specified by this attribute, the Trunk
enters Are You There (AYT) mode for up to two seconds. If the
Trunk does not receive any packets from the remote during the AYT
mode it will restage; otherwise, it exits AYT mode and continues to
provide service.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.101.1.4 |
mscTrkOverridesTableTheses attribute comprise the set of provisionable override
parameters supported by both the Trunk and DpnGateway
components. The attributes are used when reporting operational
attributes (used for metric calculations) to the routing system. SEQUENCE OF MscTrkOverridesEntry .1.3.6.1.4.1.562.36.2.1.60.102 |
mscTrkOverridesEntryAn entry in the mscTrkOverridesTable. MscTrkOverridesEntry .1.3.6.1.4.1.562.36.2.1.60.102.1 |
mscTrkOverrideTransmitSpeedThis is the overridden value of link speed (bit/s) that, if staged
successfully with the remote, is reported to the routing system for
metric calculations. A zero indicates that an override value has not
been provided and that only the measured value will be reported to
the routing system.
If this value is changed on a Trunk or DpnGateway that is enabled,
the LOCK and UNLOCK commands must be issued to the
component to restage the override with the remote.rw Gauge32 (0 | 1000..4294967295) .1.3.6.1.4.1.562.36.2.1.60.102.1.1 |
mscTrkOldOverrideRoundTripDelayThis is the overridden value of link delay (ms) that, if staged
successfully with the remote, is reported to the routing system for
metric calculations. A zero indicates that an override value has not
been provided and that only the measured value will be reported to
the routing system.
If this value is changed on a Trunk or DpnGateway that is enabled,
the LOCK and UNLOCK commands must be issued to the
component to restage the override with the remote.rwobsolete Gauge32 .1.3.6.1.4.1.562.36.2.1.60.102.1.2 |
mscTrkOverrideRoundTripUsecThis is the overridden value of link delay (ms) that, if staged
successfully with the remote, is reported to the routing system for
metric calculations. A zero indicates that an override value has not
been provided and that only the measured value will be reported to
the routing system.
If this value is changed on a Trunk or DpnGateway that is enabled,
the LOCK and UNLOCK commands must be issued to the
component to restage the override with the remote.rw FixedPoint1 .1.3.6.1.4.1.562.36.2.1.60.102.1.3 |
mscTrkStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscTrkStateEntry .1.3.6.1.4.1.562.36.2.1.60.103 |
mscTrkStateEntryAn entry in the mscTrkStateTable. MscTrkStateEntry .1.3.6.1.4.1.562.36.2.1.60.103.1 |
mscTrkAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.60.103.1.1 |
mscTrkOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.60.103.1.2 |
mscTrkUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.60.103.1.3 |
mscTrkAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.60.103.1.4 |
mscTrkProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.60.103.1.5 |
mscTrkControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.60.103.1.6 |
mscTrkAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.60.103.1.7 |
mscTrkStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.60.103.1.8 |
mscTrkUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.60.103.1.9 |
mscTrkOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscTrkOperStatusEntry .1.3.6.1.4.1.562.36.2.1.60.104 |
mscTrkOperStatusEntryAn entry in the mscTrkOperStatusTable. MscTrkOperStatusEntry .1.3.6.1.4.1.562.36.2.1.60.104.1 |
mscTrkSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.60.104.1.1 |
mscTrkOperTableThis is the group of operational attributes supported by the Trunk. SEQUENCE OF MscTrkOperEntry .1.3.6.1.4.1.562.36.2.1.60.105 |
mscTrkOperEntryAn entry in the mscTrkOperTable. MscTrkOperEntry .1.3.6.1.4.1.562.36.2.1.60.105.1 |
mscTrkRemoteComponentNameThis attribute is the component name of the remote end which it has
supplied through the Trunk staging protocol.ro AsciiString .1.3.6.1.4.1.562.36.2.1.60.105.1.1 |
mscTrkTransportTableThis group of attributes contains the set of operational parameters
measured and maintained by both the Trunk and DpnGateway
components. SEQUENCE OF MscTrkTransportEntry .1.3.6.1.4.1.562.36.2.1.60.106 |
mscTrkTransportEntryAn entry in the mscTrkTransportTable. MscTrkTransportEntry .1.3.6.1.4.1.562.36.2.1.60.106.1 |
mscTrkMeasuredSpeedToIfThis attribute indicates the current 'transmittable' bandwidth of the
underlying facility.
For a Trunk with a Unack subcomponent, and a DpnGateway with a
Utp subcomponent, if a serial port is used, the value is the measured
transmit speed of the port; if a channelized port (E1/DS1) is used,
the value is the measured transmit speed of the Channel.
For a Trunk with an AtmAccess subcomponent, the value is
calculated by converting the VCC transmit cell rate to an equivalent
bit rate. The VCC transmit cell rate is determined based on the
vccReportingBw attribute of the Trunk AtmAccess component. If
vccReportingBw has a value of pcr and attribute bwElastic of
AtmAccess has a value of no, the peak cell rate (PCR) of the VCC,
defined in txTrafficDescParm of AtmIf Vcc Vcd, is used. If
vccReportingBw has a value of pcr and attribute bwElastic of
AtmAccess has a value of yes, the minimum of the PCR, defined in
txTrafficDescParm of AtmIf Vcc Vcd, and the current cell rate
(CCR) of the VCC is used. If vccReportingBw has a value of acr,
the best measurement of the actual cell rate (ACR) of the VCC is
used, which is the minimum of the PCR, the CCR and the actual
shaping rate (ASR).
For a DpnGateway with a FrAccess subcomponent, the value
indicates the committedInformationRate of FrAccess FrMuxSetup.
A value of zero is displayed when the underlying facility is disabled
or the current 'transmittable' bandwidth is unknown.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.60.106.1.1 |
mscTrkMeasuredRoundTripDelayThis attribute indicates the measured Round Trip Delay (msec)
discovered with the remote through the Trunk and DpnGateway
staging protocols. The value includes emission, propagation, and
queuing delays. A 512 byte data packet is used to perform the
measurement. A value of zero is displayed when the link is disabled
or the measured Round Trip Delay is unknown.roobsolete Gauge32 .1.3.6.1.4.1.562.36.2.1.60.106.1.2 |
mscTrkMaxTxUnitThis is the maximum transmission unit (byte size) that is supported
by the Trunk or DpnGateway component. This size includes the
data and routing headers. A value of zero indicates the MTU has not
yet been determined.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.60.106.1.3 |
mscTrkMeasuredRoundTripDelayUsecThis attribute indicates the measured Round Trip Delay (msec)
discovered with the remote through the Trunk and DpnGateway
staging protocols. The value includes emission, propagation, and
queuing delays. A 512 byte data packet is used to perform the
measurement. A value of zero is displayed when the link is disabled
or the measured Round Trip Delay is unknown.ro FixedPoint1 .1.3.6.1.4.1.562.36.2.1.60.106.1.4 |
mscTrkStatsTableThese attributes comprise the statistics collected by the Trunk
component. SEQUENCE OF MscTrkStatsEntry .1.3.6.1.4.1.562.36.2.1.60.107 |
mscTrkStatsEntryAn entry in the mscTrkStatsTable. MscTrkStatsEntry .1.3.6.1.4.1.562.36.2.1.60.107.1 |
mscTrkAreYouThereModeEntriesThis attribute counts the number of times that the component has
entered Are You There mode. This counter wraps around to zero
when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.60.107.1.1 |
mscTrkPktFromIfThis attribute counts the number of packets received from the
remote module. It does not include the packets received from the
interrupting queue. This counter wraps around to zero when the
maximum value is exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.107.1.2 |
mscTrkTrunkPktFromIfThis attribute counts the number of internal trunk protocol packets
(including those from the interrupting queue) received from the
remote module. These packets are forwarded to the Trunk
component. This counter wraps around to zero when the maximum
value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.60.107.1.3 |
mscTrkTrunkPktToIfThis attribute counts the number of internal trunk protocol packets
(including those through the interrupting queue) transmitted to the
remote module. This counter wraps around to zero when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.60.107.1.4 |
mscTrkDiscardUnforwardThis attribute counts the number of packets received from the
remote module that have been discarded. It does not include the
packets received from the interrupting queue that have been
discarded. This counter wraps around to zero when the maximum
value is exceeded. Two main reasons that cause this counter to
increase are:
(1) the remote protocol is not compatible with the local protocol
stack or,
(2) the packet cannot be forwarded due to a recent loss of
connectivity or due to congestion.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.107.1.5 |
mscTrkDiscardTrunkPktFromIfThis attribute counts the number of internal trunk protocol packets
(including those on the interrupting queue) received from the
remote module that have been discarded. This counter wraps around
to zero when the maximum value is exceeded. The three main
reasons that cause this counter to increase are:
(1) the two Trunks are not synchronized,
(2) the remote trunk protocol is not the same version as the local
protocol, and
(3) the remote trunk has restaged.ro Counter32 .1.3.6.1.4.1.562.36.2.1.60.107.1.6 |
mscTrkIntPktFromIfThis attribute counts the number of packets received on the
interrupting queue from the remote module. This counter wraps
around to zero when the maximum value is exceeded.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.107.1.7 |
mscTrkDiscardIntUnforwardThis attribute counts the number of packets received on the
interrupting queue from the remote module that have been
discarded. This counter wraps around to zero when the maximum
value is exceeded. Two main reasons that cause this counter to
increment are:
(1) the remote protocol is not compatible to the local protocol stack
and,
(2) the packet cannot be forwarded due to either a recent loss of
connectivity or due to congestion.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.107.1.8 |
mscTrkStagingAttemptsThis attribute counts the number of times that the staging protocol
has attempted to stage with the remote module. This counter wraps
around to zero when the maximum value is exceeded. The main
reason that causes this counter to increment is that the local
hardware is up but, the local protocol cannot stage with the remote
protocol due to a faulty connection. If the value is zero, then the
local hardware has never enabled successfully.ro Counter32 .1.3.6.1.4.1.562.36.2.1.60.107.1.9 |
mscTrkDiscardTrunkPktToIfThis attribute counts the number of internal trunk protocol packets
(including those through the interrupting queue) that have been
discarded before being transmitted to the remote module. This
counter wraps around to zero when the maximum value is
exceeded. The main reason that causes this counter to increment is
that the trunk can not get sufficient resources to create an internal
trunk protocol packet.ro Counter32 .1.3.6.1.4.1.562.36.2.1.60.107.1.10 |
mscTrkSpeedReportingTableThis group of provisionable attributes provides the ability to disable
or enable the generation of speed change alarms by the Trunk
component. It also provides the ability to disable or enable the
Dynamic Speed Reporting mechanism. SEQUENCE OF MscTrkSpeedReportingEntry .1.3.6.1.4.1.562.36.2.1.60.109 |
mscTrkSpeedReportingEntryAn entry in the mscTrkSpeedReportingTable. MscTrkSpeedReportingEntry .1.3.6.1.4.1.562.36.2.1.60.109.1 |
mscTrkSpeedReportingHoldOffThis attribute specifies the hold off time for reporting speed
increases. When the measuredSpeedToIf reaches a level specified
by the speedReportingThresholds attribute, the value specifies the
duration (in units of seconds) for which the measuredSpeedToIf
must maintain that level before it will be reported.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.109.1.2 |
mscTrkLowSpeedAlarmThresholdThis attribute specifies the lower end of the range of normal speeds
for this Trunk. If the measuredSpeedToIf drops below this value the
Trunk component generates a SET alarm. When the
measuredSpeedToIf reaches or exceeds the value of this attribute,
the Trunk component will generate a CLEAR alarm.rw Unsigned32 (0 | 1..4294967295) .1.3.6.1.4.1.562.36.2.1.60.109.1.3 |
mscTrkHighSpeedAlarmThresholdThis attribute specifies the upper end of the range of normal speeds
for this Trunk. If the measuredSpeedToIf exceeds this value the
Trunk component generates a SET alarm. When the
measuredSpeedToIf returns to or falls below the value of this
attribute, the Trunk component will generate a CLEAR alarm.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.109.1.4 |
mscTrkSpdThTableThis attribute controls the behavior of the Dynamic Speed
Reporting mechanism. If its value is empty then the mechanism is
disabled and neither increases nor decreases are reported.
Otherwise, the attribute may contain up to seven threshold levels
which are used to control the reporting of speed increases. Speed
decreases are always reported immediately. If the
measuredSpeedToIf increases such that it reaches one of the
threshold levels which is greater than the last reported speed, the
Trunk starts the speedReportingHoldOff timer. If the speed remains
above this threshold until the timer expires, the Trunk component
then reports the measuredSpeedToIf; otherwise the increase is not
reported. SEQUENCE OF MscTrkSpdThEntry .1.3.6.1.4.1.562.36.2.1.60.318 |
mscTrkSpdThEntryAn entry in the mscTrkSpdThTable. MscTrkSpdThEntry .1.3.6.1.4.1.562.36.2.1.60.318.1 |
mscTrkSpdThValueThis variable represents both the value and the index for the
mscTrkSpdThTable.rw Integer32 .1.3.6.1.4.1.562.36.2.1.60.318.1.1 |
mscTrkSpdThRowStatusThis variable is used to control the addition and deletion
of individual values of the mscTrkSpdThTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.318.1.2 |
mscTrkPktBpTableThis attribute counts the number of packets received by the Trunk.
It is a vector indexed by the emission priorities (ep0, ep1, and ep2)
of the packets. The highest emission priority is ep0. These counters
wrap around to zero when the maximum value is exceeded. SEQUENCE OF MscTrkPktBpEntry .1.3.6.1.4.1.562.36.2.1.60.368 |
mscTrkPktBpEntryAn entry in the mscTrkPktBpTable. MscTrkPktBpEntry .1.3.6.1.4.1.562.36.2.1.60.368.1 |
mscTrkPktBpIndexThis variable represents the mscTrkPktBpTable
specific index for the mscTrkPktBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.368.1.1 |
mscTrkPktBpValueThis variable represents an individual value for the
mscTrkPktBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.368.1.2 |
mscTrkDiscBpTableThis attribute counts the number of packets received from the
remote module that have been discarded. It is a vector indexed by
the emission priorities (ep0, ep1 and ep2) of the packets. The
highest emission priority is ep0. These counters wrap around to zero
when the maximum value is exceeded.
Two main reasons that cause this counter to increment are:
(1) the remote protocol is not compatible to the local protocol stack
and,
(2) the packet cannot be forwarded due to either a recent loss of
connectivity or due to congestion.
DESCRIPTION SEQUENCE OF MscTrkDiscBpEntry .1.3.6.1.4.1.562.36.2.1.60.369 |
mscTrkDiscBpEntryAn entry in the mscTrkDiscBpTable. MscTrkDiscBpEntry .1.3.6.1.4.1.562.36.2.1.60.369.1 |
mscTrkDiscBpIndexThis variable represents the mscTrkDiscBpTable
specific index for the mscTrkDiscBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.369.1.1 |
mscTrkDiscBpValueThis variable represents an individual value for the
mscTrkDiscBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.369.1.2 |
mscTrkOctBpTableThis attribute counts the octets coming from the remote module
which are received by the Trunk. It is a vector indexed by the
emission priorities (ep0, ep1 and ep2) of the packets. The highest
emission priority is ep0. These counters wrap around to zero when
the maximum value is exceeded. SEQUENCE OF MscTrkOctBpEntry .1.3.6.1.4.1.562.36.2.1.60.370 |
mscTrkOctBpEntryAn entry in the mscTrkOctBpTable. MscTrkOctBpEntry .1.3.6.1.4.1.562.36.2.1.60.370.1 |
mscTrkOctBpIndexThis variable represents the mscTrkOctBpTable
specific index for the mscTrkOctBpTable. Enumeration .1.3.6.1.4.1.562.36.2.1.60.370.1.1 |
mscTrkOctBpValueThis variable represents an individual value for the
mscTrkOctBpTable.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.60.370.1.2 |
trunksMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.43 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.43 |
trunksGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.43.1 |
trunksGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.43.1.1 |
trunksGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.43.1.1.3 |
trunksGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.43.1.1.3.2 |
trunksCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.43.3 |
trunksCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.43.3.1 |
trunksCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.43.3.1.3 |
trunksCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.43.3.1.3.2 |