Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.
1866
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
1866 total| Object Name |
|---|
mscLp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12 |
mscLpRowStatusTableThis entry controls the addition and deletion of
mscLp components. SEQUENCE OF MscLpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.1 |
mscLpRowStatusEntryA single entry in the table represents a single
mscLp component. MscLpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.1.1 |
mscLpRowStatusThis variable is used as the basis for SNMP naming of
mscLp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.1.1.1 |
mscLpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.1.1.2 |
mscLpStorageTypeThis variable represents the storage type value for the
mscLp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.1.1.4 |
mscLpIndexThis variable represents the index for the mscLp tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.1.1.10 |
mscLpDS3 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5 |
mscLpDS3RowStatusTableThis entry controls the addition and deletion of
mscLpDS3 components. SEQUENCE OF MscLpDS3RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.1 |
mscLpDS3RowStatusEntryA single entry in the table represents a single
mscLpDS3 component. MscLpDS3RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.1.1 |
mscLpDS3RowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3 components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.1.1.1 |
mscLpDS3ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.1.1.2 |
mscLpDS3StorageTypeThis variable represents the storage type value for the
mscLpDS3 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.1.1.4 |
mscLpDS3IndexThis variable represents the index for the mscLpDS3 tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.5.1.1.10 |
mscLpDS3Test OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5.2 |
mscLpDS3TestRowStatusTableThis entry controls the addition and deletion of
mscLpDS3Test components. SEQUENCE OF MscLpDS3TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.2.1 |
mscLpDS3TestRowStatusEntryA single entry in the table represents a single
mscLpDS3Test component. MscLpDS3TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.2.1.1 |
mscLpDS3TestRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3Test components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.1 |
mscLpDS3TestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.2 |
mscLpDS3TestStorageTypeThis variable represents the storage type value for the
mscLpDS3Test tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.4 |
mscLpDS3TestIndexThis variable represents the index for the mscLpDS3Test tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.10 |
mscLpDS3TestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpDS3TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.5.2.10 |
mscLpDS3TestStateEntryAn entry in the mscLpDS3TestStateTable. MscLpDS3TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.5.2.10.1 |
mscLpDS3TestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.1 |
mscLpDS3TestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.2 |
mscLpDS3TestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.3 |
mscLpDS3TestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpDS3TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.5.2.11 |
mscLpDS3TestSetupEntryAn entry in the mscLpDS3TestSetupTable. MscLpDS3TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.5.2.11.1 |
mscLpDS3TestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.1 |
mscLpDS3TestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.2 |
mscLpDS3TestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.3 |
mscLpDS3TestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.4 |
mscLpDS3TestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.5 |
mscLpDS3TestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.6 |
mscLpDS3TestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.7 |
mscLpDS3TestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.8 |
mscLpDS3TestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpDS3TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.5.2.12 |
mscLpDS3TestResultsEntryAn entry in the mscLpDS3TestResultsTable. MscLpDS3TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1 |
mscLpDS3TestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.1 |
mscLpDS3TestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.2 |
mscLpDS3TestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.3 |
mscLpDS3TestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.4 |
mscLpDS3TestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.5 |
mscLpDS3TestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.6 |
mscLpDS3TestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.7 |
mscLpDS3TestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.8 |
mscLpDS3TestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.9 |
mscLpDS3TestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.10 |
mscLpDS3TestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.11 |
mscLpDS3CBit OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5.3 |
mscLpDS3CBitRowStatusTableThis entry controls the addition and deletion of
mscLpDS3CBit components. SEQUENCE OF MscLpDS3CBitRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.3.1 |
mscLpDS3CBitRowStatusEntryA single entry in the table represents a single
mscLpDS3CBit component. MscLpDS3CBitRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.3.1.1 |
mscLpDS3CBitRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3CBit components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.1 |
mscLpDS3CBitComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.2 |
mscLpDS3CBitStorageTypeThis variable represents the storage type value for the
mscLpDS3CBit tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.4 |
mscLpDS3CBitIndexThis variable represents the index for the mscLpDS3CBit tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.10 |
mscLpDS3CBitOperationalTableThis group contains the DS3 C-Bit Parity operational data for the
CBIT component. SEQUENCE OF MscLpDS3CBitOperationalEntry .1.3.6.1.4.1.562.36.2.1.12.5.3.10 |
mscLpDS3CBitOperationalEntryAn entry in the mscLpDS3CBitOperationalTable. MscLpDS3CBitOperationalEntry .1.3.6.1.4.1.562.36.2.1.12.5.3.10.1 |
mscLpDS3CBitFarEndAlarmThis attribute indicates the Far-End alarm signal that is currently
received at the DS3 interface. This signal is carried over the Far-
End Alarm and Control (FEAC) bits of DS3 frames. Five far-end
alarm signals can be received: far-end equipment failure that is
received when the far-end terminal has detected a local equipment
failure; far-end Loss Of Signal (LOS) that is received when the far-
end DS3 terminal has declared a LOS failure condition; far-end
Loss of Frame (LOF) when the far-end DS3 terminal has declared a
Loss Of Frame (LOF) failure condition; far-end Alarm Indication
Signal (AIS) when the far-end has declared an AIS failure
condition; far-end Idle when the far-end has declared an Idle signal
condition.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.1 |
mscLpDS3CBitLoopedbackToFarEndThis indicates whether or not the DS3 component is currently
looping back the incoming DS3 signal or one of its DS1 tributaries
to the far-end DS3 terminal. This is activated when the far-end DS3
equipment has ordered the local terminal to do so.
Description of bits:
notused0(0)
n1(1)
n2(2)
n3(3)
n4(4)
n5(5)
n6(6)
n7(7)
n8(8)
n9(9)
n10(10)
n11(11)
n12(12)
n13(13)
n14(14)
n15(15)
n16(16)
n17(17)
n18(18)
n19(19)
n20(20)
n21(21)
n22(22)
n23(23)
n24(24)
n25(25)
n26(26)
n27(27)
n28(28)
notused29(29)
notused30(30)
ds3Line(31)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.2 |
mscLpDS3CBitLoopbackAtFarEndRequestedThis attribute indicates which DS1 tributaries are being looped
back, or if the DS3 line is being looped back. Each value listed
indicates a loopback request has been made. When a loopback
deactivation command has been sent to the far end, the
corresponding value will be removed from the list.
Description of bits:
notused0(0)
n1(1)
n2(2)
n3(3)
n4(4)
n5(5)
n6(6)
n7(7)
n8(8)
n9(9)
n10(10)
n11(11)
n12(12)
n13(13)
n14(14)
n15(15)
n16(16)
n17(17)
n18(18)
n19(19)
n20(20)
n21(21)
n22(22)
n23(23)
n24(24)
n25(25)
n26(26)
n27(27)
n28(28)
notused29(29)
notused30(30)
ds3Line(31)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.3 |
mscLpDS3CBitStatsTableThis group contains the DS3 C-Bit Parity statistical data for the
CBIT component. Each attribute type is a non-negative integer
which monotonically increases until it reaches a maximum value, at
which point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpDS3CBitStatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.3.11 |
mscLpDS3CBitStatsEntryAn entry in the mscLpDS3CBitStatsTable. MscLpDS3CBitStatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1 |
mscLpDS3CBitCbitErrorFreeSecThis attribute indicates the number of seconds that the DS3 port has
not suffered any C-Bit errors.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.1 |
mscLpDS3CBitCbitCodeViolationsThis attribute indicates the total count of C-Bit Parity Code
Violations (CCV). A CCV is obtained when the parity calculated
over the previous DS3 frame and the value of the CP-bits appearing
in the current DS3 frame differ. The value of this attribute will wrap
around to 0 if it does reach its maximum value. CCV counting is
inhibited for second intervals where C-Bit Parity Severely Errored
Seconds (CSES) are counted. It is also inhibited for second intervals
where C-Bit Unavailable Seconds (CUAS) are counted.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.2 |
mscLpDS3CBitCbitErroredSecThis attribute indicates the total number of C-Bit Parity Errored
Seconds (CES). A CES second is declared for second intervals
containing one or more CCVs or when one or more SEF (Severely
Errored Frame) or AIS (Alarm Indication Signal) defects.
CES counting is inhibited for second intervals where C-Bit
Unavailable Seconds (CUAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.3 |
mscLpDS3CBitCbitSevErroredSecThis attribute indicates the total number of C-Bit Parity Severely
Errored Seconds (CSES). A CSES is declared for second intervals
containing more than 44 CCVs or one or more SEF or AIS defects.
The occurrence of CSES in a one second interval causes the
inhibition of CCV counting during that second interval. CSES
counting is also inhibited for second intervals where C-Bit
Unavailable Seconds (CUAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.4 |
mscLpDS3CBitCbitUnavailSecThis attribute indicates the total number of one second intervals for
which the DS3 path is unavailable. The DS3 path becomes
unavailable at the onset of 10 consecutive C-Bit Severely Errored
Seconds (CSES). The 10 CSESs are included in the unavailable
time. Once unavailable, the DS3 path becomes available at the onset
of 10 contiguous seconds with no CSES. The 10 seconds with no
CSES are excluded from the unavailable time. For second intervals
where CUAS is counted, counting of C-Bit Coding Violations
(CCV), C-Bit Errored Seconds (CES) and C-Bit Severely Errored
Seconds (CSES) is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.5 |
mscLpDS3CBitFarEndErrorFreeSecThis attribute indicates the number of seconds that the DS3 port has
not suffered of any far-end errors.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.6 |
mscLpDS3CBitFarEndCodeViolationsThis attribute indicates the total count of DS3 frames containing a
Coding Violation on the Far-End (FECV), also known as a Far-End
Block Error (FEBE). Each FEBE is reported over the FEBE bits
each time the far-end DS3 terminal detects a C-BIT Parity error
over a received DS3 frame. For second intervals where Far-End
Unavailable Seconds (FEAUS) or Far-End Severely Errored
Seconds (FESES) are counted, counting of FECVs is inhibited.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.7 |
mscLpDS3CBitFarEndErroredSecThis attribute indicates the total number of Far-End Errored
Seconds (FEES). A FEES is declared for second intervals
containing with one or more FECVs or one or more far-end SEF/
AIS defects. A far-end SEF/AIS defect occurs when the X-Bits of
the DS3 frame are received as being set to zero. For second
intervals where Far-End Unavailable Seconds (FEUAS) are
counted, counting of FEESs is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.8 |
mscLpDS3CBitFarEndSevErroredSecThis attribute indicates the total number of Far-End Severely
Errored Seconds (FESES). A FESES is declared for second
intervals containing more than 44 FECVs or one or more far-end
SEF/AIS defects. For second intervals where a FESES is counted,
counting of FECVs is inhibited. For second intervals where Far-End
Unavailable Seconds (FEUAS) are counted, counting of FESESs is
inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.9 |
mscLpDS3CBitFarEndSefAisSecThis attribute indicates the total number of Far-End SEF/AIS
Seconds (FESAS). A FESAS is declared for second intervals
containing one or more far-end SEF/AIS defects.For second
intervals where Far-End Unavailable Seconds (FEUAS) are
counted, counting of FESASs is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.10 |
mscLpDS3CBitFarEndUnavailSecThis attribute indicates the total number of one second intervals for
which the DS3 far-end path is unavailable. The DS3 far-end path
becomes unavailable at the onset of 10 consecutive Far-End
Severely Errored Seconds (FESES). The 10 FESESs are included in
the unavailable time. Once unavailable, the DS3 far-end path
becomes available at the onset of 10 contiguous seconds with no
FESES. The 10 seconds with no FESES are excluded from the
unavailable time. For second intervals where FEUAS is counted,
counting of Far-End Coding Violations (FECV), Far-End Errored
Seconds (FEES), Far-End Severely Errored Seconds (FESES) and
Far-End Sef/Ais Seconds (FESAS) is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.11 |
mscLpDS3CBitFarEndFailuresThis attribute indicates the total number of times that a far-end path
failure (i.e. a Far-End SEF/AIS defect) has been declared.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.12 |
mscLpDS3Plcp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5.4 |
mscLpDS3PlcpRowStatusTableThis entry controls the addition and deletion of
mscLpDS3Plcp components. SEQUENCE OF MscLpDS3PlcpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.4.1 |
mscLpDS3PlcpRowStatusEntryA single entry in the table represents a single
mscLpDS3Plcp component. MscLpDS3PlcpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.4.1.1 |
mscLpDS3PlcpRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3Plcp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.1 |
mscLpDS3PlcpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.2 |
mscLpDS3PlcpStorageTypeThis variable represents the storage type value for the
mscLpDS3Plcp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.4 |
mscLpDS3PlcpIndexThis variable represents the index for the mscLpDS3Plcp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.10 |
mscLpDS3PlcpOperationalTableThis group contains the operational data for the PLCP component. SEQUENCE OF MscLpDS3PlcpOperationalEntry .1.3.6.1.4.1.562.36.2.1.12.5.4.10 |
mscLpDS3PlcpOperationalEntryAn entry in the mscLpDS3PlcpOperationalTable. MscLpDS3PlcpOperationalEntry .1.3.6.1.4.1.562.36.2.1.12.5.4.10.1 |
mscLpDS3PlcpLofAlarmThis attribute displays whether a PLCP Loss Of Frame (LOF)
failure alarm state has been entered. An LOF failure is declared
when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect
occurs when an OOF (Out of Frame) state persists for more than 1
ms. If the OOF events are intermittent, the LOF defect counter is
decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3
PLCP) of the incrementing rate, with all measurements based on a
200 ms polling cycle. An OOF event (also known as a PLCP SEF
event) is declared when an error is detected in both the A1 and A2
octets, or when two consecutive POHIDs are found in error.
OOF is removed when two valid sets of framing octets and two
valid and sequential POHID octets have been found. The LOF
defect is removed when the defect counter reaches zero, i.e. when
OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms
(G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is
absent for 10.0 s +/- 0.5 s
The DS3 or E3 component goes into an operational state of disabled
until the LOF failure alarm is cleared. The terminal declaring the
LOF failure alarm will transmit a PLCP RAI signal to the far-end
for the duration of the alarm.
The lofAlarm attribute is always set to off when the DS3 or E3
component has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.1 |
mscLpDS3PlcpRxRaiAlarmThis attribute displays whether a PLCP Remote Alarm Indication
(RAI) failure alarm state has been entered. An RAI failure alarm
occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte)
are high on the incoming line. An RAI failure alarm is cleared when
ten consecutive RAI bits are set to 0.
Note: Some standards call this alarm RFI.
The rxRaiAlarm attribute is always set to off when the DS3 or E3
component has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.2 |
mscLpDS3PlcpStatsTableThis group contains the statistical data for the PLCP component.
Each attribute type is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero. SEQUENCE OF MscLpDS3PlcpStatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.4.11 |
mscLpDS3PlcpStatsEntryAn entry in the mscLpDS3PlcpStatsTable. MscLpDS3PlcpStatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1 |
mscLpDS3PlcpErrorFreeSecThis attribute indicates the number of seconds during which the
near-end PLCP path layer had no errors.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.1 |
mscLpDS3PlcpCodingViolationsThis attribute indicates the total number of BIP-8 Errors, framing
pattern octet errors, and path overhead identification errors detected
in received PLCP frames.
Counting of PLCP CV is inhibited for second intervals where PLCP
Severely Errored Framing Seconds (SEFS) or PLCP Unavailable
Seconds (UAS) are counted.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.2 |
mscLpDS3PlcpErroredSecThis attribute indicates the number of seconds containing one or
more PLCP Coding Violations (CV) or in which a PLCP Severely
Errored Framing Second (SEFS) was counted.
Counting of PLCP ES is inhibited during second intervals where
PLCP Unavailable Seconds (UAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.3 |
mscLpDS3PlcpSevErroredSecThis attribute indicates the number of seconds containing 5 or more
PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF
event occurred).
Counting of PLCP SES is inhibited during second intervals where
PLCP Unavailable Seconds (UAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.4 |
mscLpDS3PlcpSevErroredFramingSecThis attribute indicates the number of seconds containing one or
more PLCP Severely Errored Frame (SEF) events. An SEF event is
equivalent to a PLCP OOF (Out of Frame) event.
Counting of PLCPP SEFSs is inhibited for second intervals where
PLCP Unavailable Seconds (UAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.5 |
mscLpDS3PlcpUnavailSecThis attribute indicates the number of seconds when the near-end
PLCP layer is unavailable. The PLCP Path Layer becomes
unavailable at the declaration of PLCP LOF (Loss of Frame) failure
alarm state. The PLCP Path Layer becomes available again only
after clearing this condition.
For second intervals where PLCP UAS are counted, counting of
PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding
Violations (CV), PLCP Errored Seconds (ES), PLCP Severely
Errored Seconds (SES) and PLCP Far-End Severely Errored
Seconds (FESES) is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.6 |
mscLpDS3PlcpFarEndErrorFreeSecThis attribute indicates the number of seconds during which the far-
end PLCP path layer had no errors.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.7 |
mscLpDS3PlcpFarEndCodingViolationsThis attribute indicates the total number of PLCP Far-End Block
Errors (FEBE) reported by the far-end terminal.
Counting of FEBEs is inhibited for second intervals where PLCP
Far-End Unavailable Seconds (FEUAS) are counted.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.8 |
mscLpDS3PlcpFarEndErroredSecThis attribute indicates the number of seconds containing one or
more PLCP Far-End Coding Violations (FECV).
Counting of PLCP FEES is inhibited during second intervals where
PLCP Far-End Unavailable Seconds (FEUAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.9 |
mscLpDS3PlcpFarEndSevErroredSecThis attribute indicates the number of seconds containing 5 or more
PLCP Far-End Coding Violations (FECV).
Counting of PLCP FESES is inhibited for second intervals where
PLCP Far-End Unavailable Seconds (FEUAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.10 |
mscLpDS3PlcpFarEndUnavailableSecThis attribute indicates the number of seconds during which the
PLCP far end is unavailable. The PLCP Path Layer becomes
unavailable at the declaration of PLCP RAI (Remote Alarm
Indication). Service becomes available again after this condition is
cleared. For second intervals where PLCP FEUAS are counted,
counting of PLCP Far-End Coding Violations (FECV), PLCP Far-
End Errored Seconds (FEES), and PLCP Far-End Severely Errored
Seconds (FESES) is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.11 |
mscLpDS3Cell OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5.5 |
mscLpDS3CellRowStatusTableThis entry controls the addition and deletion of
mscLpDS3Cell components. SEQUENCE OF MscLpDS3CellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.5.1 |
mscLpDS3CellRowStatusEntryA single entry in the table represents a single
mscLpDS3Cell component. MscLpDS3CellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.5.1.1 |
mscLpDS3CellRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3Cell components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.1 |
mscLpDS3CellComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.2 |
mscLpDS3CellStorageTypeThis variable represents the storage type value for the
mscLpDS3Cell tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.4 |
mscLpDS3CellIndexThis variable represents the index for the mscLpDS3Cell tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.10 |
mscLpDS3CellProvTableThis group contains the provisioning attributes for the AtmCell
component. SEQUENCE OF MscLpDS3CellProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.5.10 |
mscLpDS3CellProvEntryAn entry in the mscLpDS3CellProvTable. MscLpDS3CellProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.5.10.1 |
mscLpDS3CellAlarmActDelayThis attribute defines the time during which a Loss of Cell
Delineation (LCD) defect should be observed before declaring an
LCD alarm (alarm 70115501). The time is specified in milliseconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.1 |
mscLpDS3CellScrambleCellPayloadCell scrambling, as defined by ITU-T Recommendation I.432., can
provide a solution to the problem of transmission equipment which
is sensitive to certain bit patterns in the ATM cell payload. This
attribute controls whether or not the cell payload is scrambled.
It defaults to off for DS1 interfaces, and on for all other interfaces.
Note that this setting must be the same at both ends of the link.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.2 |
mscLpDS3CellCorrectSingleBitHeaderErrorsThis attribute specifies whether the port corrects single bit errors
detected in the headers of received cells. If single bit errors are
corrected, the affected cells are passed up to the ATM layer
according to normal operation. If single bit errors are not corrected,
these errored cells are discarded by the physical layer. Note that
cells containing multiple bit errors in their headers are always
discarded.
Single bit HEC error correction must remain off for the following
card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm,
2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.3 |
mscLpDS3CellOperTableThis group contains the common operational attributes for the
AtmCell component. SEQUENCE OF MscLpDS3CellOperEntry .1.3.6.1.4.1.562.36.2.1.12.5.5.11 |
mscLpDS3CellOperEntryAn entry in the mscLpDS3CellOperTable. MscLpDS3CellOperEntry .1.3.6.1.4.1.562.36.2.1.12.5.5.11.1 |
mscLpDS3CellLcdAlarmThis attribute displays whether the Loss of Cell Delineation (LCD)
failure alarm state has been entered. This state is entered when LCD
defects have been observed and accumulated for a period of time
specified through the alarmActDelay attribute.
In ATM cell direct mapping mode, an LCD defect occurs when Out
of Cell Delineation (OCD) anomaly persists for x milliseconds, and
disappears when the Out of Cell Delineation (OCD) is absent for x
msec. An OCD anomaly occurs when 7 consecutive incorrect HECs
have been detected. An OCD anomaly terminates when 6
consecutive correct HECs have been detected.
For an AtmCell component located under a DS3 or E3 component
with mapping = PLCP, the LCD defect is directly derived from the
PLCP LOF defect.
If LCD defects are intermittently occurring, the LCD defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle
The component under which is located the AtmCell component goes
into an operational state of disabled until the LCD alarm condition
is cleared. The condition is cleared after the LCD defect has not
been reported for a period of 10 seconds +/- 0.5 seconds.
The lcdAlarm attribute is always set to off when the parent of the
AtmCell component has been locked and left offline. This can also
happen when the Path or Channel component has been suspended
since its parent has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.5.11.1.1 |
mscLpDS3CellStatsTableThis group contains the Statistics attribute for the AtmCell
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpDS3CellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.5.12 |
mscLpDS3CellStatsEntryAn entry in the mscLpDS3CellStatsTable. MscLpDS3CellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.5.12.1 |
mscLpDS3CellUncorrectableHecErrorsThis attribute indicates the number of uncorrectable ATM cell
header errors that have been detected. Counting of
uncorrectableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detected.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.1 |
mscLpDS3CellSevErroredSecThis attribute indicates the total number of ATM Cell Severely
Errored Seconds (SESs) that have been counted.
In direct mapping mode, an ATM Cell SES is declared for second
intervals containing one or more Out of Cell Delineation (OCD)
defects. An OCD defect occurs when seven consecutive incorrect
HECs have been detected. An OCD defect terminates when six
consecutive correct HECs have been detected.
In PLCP mapping mode, an ATM Cell SES is declared for second
intervals containing one or more PLCP LOF defects.
Counting of uncorrectableHeaderErrors (ucErr) and
correctableHeaderErrors (cErr) is inhibited when the OCD defect
is present.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.2 |
mscLpDS3CellReceiveCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
received on the link to the nominal link capacity. The utilization is
calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.3 |
mscLpDS3CellTransmitCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
transmitted on the link to the nominal link capacity. The utilization
is calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.4 |
mscLpDS3CellCorrectableHeaderErrorsThis attribute indicates the number of correctable ATM cell header
errors that have been detected and corrected. Counting of
correctableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detectedro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.5 |
mscLpDS3DS1 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5.6 |
mscLpDS3DS1RowStatusTableThis entry controls the addition and deletion of
mscLpDS3DS1 components. SEQUENCE OF MscLpDS3DS1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.1 |
mscLpDS3DS1RowStatusEntryA single entry in the table represents a single
mscLpDS3DS1 component. MscLpDS3DS1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.1.1 |
mscLpDS3DS1RowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3DS1 components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.1 |
mscLpDS3DS1ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.2 |
mscLpDS3DS1StorageTypeThis variable represents the storage type value for the
mscLpDS3DS1 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.4 |
mscLpDS3DS1IndexThis variable represents the index for the mscLpDS3DS1 tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.10 |
mscLpDS3DS1Chan OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5.6.2 |
mscLpDS3DS1ChanRowStatusTableThis entry controls the addition and deletion of
mscLpDS3DS1Chan components. SEQUENCE OF MscLpDS3DS1ChanRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.1 |
mscLpDS3DS1ChanRowStatusEntryA single entry in the table represents a single
mscLpDS3DS1Chan component. MscLpDS3DS1ChanRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1 |
mscLpDS3DS1ChanRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3DS1Chan components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.1 |
mscLpDS3DS1ChanComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.2 |
mscLpDS3DS1ChanStorageTypeThis variable represents the storage type value for the
mscLpDS3DS1Chan tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.4 |
mscLpDS3DS1ChanIndexThis variable represents the index for the mscLpDS3DS1Chan tables. Integer32 (0) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.10 |
mscLpDS3DS1ChanTest OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2 |
mscLpDS3DS1ChanTestRowStatusTableThis entry controls the addition and deletion of
mscLpDS3DS1ChanTest components. SEQUENCE OF MscLpDS3DS1ChanTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1 |
mscLpDS3DS1ChanTestRowStatusEntryA single entry in the table represents a single
mscLpDS3DS1ChanTest component. MscLpDS3DS1ChanTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1 |
mscLpDS3DS1ChanTestRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3DS1ChanTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.1 |
mscLpDS3DS1ChanTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.2 |
mscLpDS3DS1ChanTestStorageTypeThis variable represents the storage type value for the
mscLpDS3DS1ChanTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.4 |
mscLpDS3DS1ChanTestIndexThis variable represents the index for the mscLpDS3DS1ChanTest tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.10 |
mscLpDS3DS1ChanTestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpDS3DS1ChanTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10 |
mscLpDS3DS1ChanTestStateEntryAn entry in the mscLpDS3DS1ChanTestStateTable. MscLpDS3DS1ChanTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1 |
mscLpDS3DS1ChanTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.1 |
mscLpDS3DS1ChanTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.2 |
mscLpDS3DS1ChanTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.3 |
mscLpDS3DS1ChanTestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpDS3DS1ChanTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11 |
mscLpDS3DS1ChanTestSetupEntryAn entry in the mscLpDS3DS1ChanTestSetupTable. MscLpDS3DS1ChanTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1 |
mscLpDS3DS1ChanTestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.1 |
mscLpDS3DS1ChanTestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.2 |
mscLpDS3DS1ChanTestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.3 |
mscLpDS3DS1ChanTestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.4 |
mscLpDS3DS1ChanTestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.5 |
mscLpDS3DS1ChanTestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.6 |
mscLpDS3DS1ChanTestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.7 |
mscLpDS3DS1ChanTestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.8 |
mscLpDS3DS1ChanTestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpDS3DS1ChanTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12 |
mscLpDS3DS1ChanTestResultsEntryAn entry in the mscLpDS3DS1ChanTestResultsTable. MscLpDS3DS1ChanTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1 |
mscLpDS3DS1ChanTestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.1 |
mscLpDS3DS1ChanTestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.2 |
mscLpDS3DS1ChanTestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.3 |
mscLpDS3DS1ChanTestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.4 |
mscLpDS3DS1ChanTestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.5 |
mscLpDS3DS1ChanTestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.6 |
mscLpDS3DS1ChanTestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.7 |
mscLpDS3DS1ChanTestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.8 |
mscLpDS3DS1ChanTestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.9 |
mscLpDS3DS1ChanTestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.10 |
mscLpDS3DS1ChanTestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.11 |
mscLpDS3DS1ChanCell OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3 |
mscLpDS3DS1ChanCellRowStatusTableThis entry controls the addition and deletion of
mscLpDS3DS1ChanCell components. SEQUENCE OF MscLpDS3DS1ChanCellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1 |
mscLpDS3DS1ChanCellRowStatusEntryA single entry in the table represents a single
mscLpDS3DS1ChanCell component. MscLpDS3DS1ChanCellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1 |
mscLpDS3DS1ChanCellRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3DS1ChanCell components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.1 |
mscLpDS3DS1ChanCellComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.2 |
mscLpDS3DS1ChanCellStorageTypeThis variable represents the storage type value for the
mscLpDS3DS1ChanCell tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.4 |
mscLpDS3DS1ChanCellIndexThis variable represents the index for the mscLpDS3DS1ChanCell tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.10 |
mscLpDS3DS1ChanCellProvTableThis group contains the provisioning attributes for the AtmCell
component. SEQUENCE OF MscLpDS3DS1ChanCellProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10 |
mscLpDS3DS1ChanCellProvEntryAn entry in the mscLpDS3DS1ChanCellProvTable. MscLpDS3DS1ChanCellProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1 |
mscLpDS3DS1ChanCellAlarmActDelayThis attribute defines the time during which a Loss of Cell
Delineation (LCD) defect should be observed before declaring an
LCD alarm (alarm 70115501). The time is specified in milliseconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.1 |
mscLpDS3DS1ChanCellScrambleCellPayloadCell scrambling, as defined by ITU-T Recommendation I.432., can
provide a solution to the problem of transmission equipment which
is sensitive to certain bit patterns in the ATM cell payload. This
attribute controls whether or not the cell payload is scrambled.
It defaults to off for DS1 interfaces, and on for all other interfaces.
Note that this setting must be the same at both ends of the link.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.2 |
mscLpDS3DS1ChanCellCorrectSingleBitHeaderErrorsThis attribute specifies whether the port corrects single bit errors
detected in the headers of received cells. If single bit errors are
corrected, the affected cells are passed up to the ATM layer
according to normal operation. If single bit errors are not corrected,
these errored cells are discarded by the physical layer. Note that
cells containing multiple bit errors in their headers are always
discarded.
Single bit HEC error correction must remain off for the following
card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm,
2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.3 |
mscLpDS3DS1ChanCellOperTableThis group contains the common operational attributes for the
AtmCell component. SEQUENCE OF MscLpDS3DS1ChanCellOperEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11 |
mscLpDS3DS1ChanCellOperEntryAn entry in the mscLpDS3DS1ChanCellOperTable. MscLpDS3DS1ChanCellOperEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1 |
mscLpDS3DS1ChanCellLcdAlarmThis attribute displays whether the Loss of Cell Delineation (LCD)
failure alarm state has been entered. This state is entered when LCD
defects have been observed and accumulated for a period of time
specified through the alarmActDelay attribute.
In ATM cell direct mapping mode, an LCD defect occurs when Out
of Cell Delineation (OCD) anomaly persists for x milliseconds, and
disappears when the Out of Cell Delineation (OCD) is absent for x
msec. An OCD anomaly occurs when 7 consecutive incorrect HECs
have been detected. An OCD anomaly terminates when 6
consecutive correct HECs have been detected.
For an AtmCell component located under a DS3 or E3 component
with mapping = PLCP, the LCD defect is directly derived from the
PLCP LOF defect.
If LCD defects are intermittently occurring, the LCD defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle
The component under which is located the AtmCell component goes
into an operational state of disabled until the LCD alarm condition
is cleared. The condition is cleared after the LCD defect has not
been reported for a period of 10 seconds +/- 0.5 seconds.
The lcdAlarm attribute is always set to off when the parent of the
AtmCell component has been locked and left offline. This can also
happen when the Path or Channel component has been suspended
since its parent has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1.1 |
mscLpDS3DS1ChanCellStatsTableThis group contains the Statistics attribute for the AtmCell
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpDS3DS1ChanCellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12 |
mscLpDS3DS1ChanCellStatsEntryAn entry in the mscLpDS3DS1ChanCellStatsTable. MscLpDS3DS1ChanCellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1 |
mscLpDS3DS1ChanCellUncorrectableHecErrorsThis attribute indicates the number of uncorrectable ATM cell
header errors that have been detected. Counting of
uncorrectableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detected.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.1 |
mscLpDS3DS1ChanCellSevErroredSecThis attribute indicates the total number of ATM Cell Severely
Errored Seconds (SESs) that have been counted.
In direct mapping mode, an ATM Cell SES is declared for second
intervals containing one or more Out of Cell Delineation (OCD)
defects. An OCD defect occurs when seven consecutive incorrect
HECs have been detected. An OCD defect terminates when six
consecutive correct HECs have been detected.
In PLCP mapping mode, an ATM Cell SES is declared for second
intervals containing one or more PLCP LOF defects.
Counting of uncorrectableHeaderErrors (ucErr) and
correctableHeaderErrors (cErr) is inhibited when the OCD defect
is present.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.2 |
mscLpDS3DS1ChanCellReceiveCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
received on the link to the nominal link capacity. The utilization is
calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.3 |
mscLpDS3DS1ChanCellTransmitCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
transmitted on the link to the nominal link capacity. The utilization
is calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.4 |
mscLpDS3DS1ChanCellCorrectableHeaderErrorsThis attribute indicates the number of correctable ATM cell header
errors that have been detected and corrected. Counting of
correctableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detectedro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.5 |
mscLpDS3DS1ChanTc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4 |
mscLpDS3DS1ChanTcRowStatusTableThis entry controls the addition and deletion of
mscLpDS3DS1ChanTc components. SEQUENCE OF MscLpDS3DS1ChanTcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1 |
mscLpDS3DS1ChanTcRowStatusEntryA single entry in the table represents a single
mscLpDS3DS1ChanTc component. MscLpDS3DS1ChanTcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1 |
mscLpDS3DS1ChanTcRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3DS1ChanTc components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.1 |
mscLpDS3DS1ChanTcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.2 |
mscLpDS3DS1ChanTcStorageTypeThis variable represents the storage type value for the
mscLpDS3DS1ChanTc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.4 |
mscLpDS3DS1ChanTcIndexThis variable represents the index for the mscLpDS3DS1ChanTc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.10 |
mscLpDS3DS1ChanTcProvTableThis group contains all specific provisioning data for a Tc
component. SEQUENCE OF MscLpDS3DS1ChanTcProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10 |
mscLpDS3DS1ChanTcProvEntryAn entry in the mscLpDS3DS1ChanTcProvTable. MscLpDS3DS1ChanTcProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1 |
mscLpDS3DS1ChanTcReplacementDataThis attribute specifies the trunk conditioning data byte to be
substituted into the timeslots defined by the Chan component under
fault conditions.
replacementData can be set to any two digit hexadecimal number.
The following are recommended values:
DS1 MUX Out Of Service Code = 0x1A
E1 MUX Out Of Service Code = 0xFFrw Hex .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.1 |
mscLpDS3DS1ChanTcSignalOneDurationThis attribute specifies the time duration in seconds for which
signalOne is substituted into the appropriate signaling bits, when a
lineType that uses CAS has been defined. When signalOneDuration
has expired signalTwo is substituted into the appropriate signaling
bits.
If signalOneDuration is set to zero then only signalTwo is
substituted into the appropriate signaling bits during error
conditions.
signalOneDuration can be set to any integer value from 0 to 60
seconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.2 |
mscLpDS3DS1ChanTcOpTableThis group contains all specific operational data for a Tc
component. SEQUENCE OF MscLpDS3DS1ChanTcOpEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11 |
mscLpDS3DS1ChanTcOpEntryAn entry in the mscLpDS3DS1ChanTcOpTable. MscLpDS3DS1ChanTcOpEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1 |
mscLpDS3DS1ChanTcIngressConditioningThis attribute indicates the status of locally generated trunk
conditioning towards the ATM network.
When trunk conditioning is being locally generated towards the
ATM network, ingressConditioning is set to on.
When trunk conditioning is not being locally generated towards the
ATM network, ingressConditioning is set to off.
Trunk conditioning is transmitted towards the ATM network under
the following conditions:
lossOfSignal (LOS)
lossOfFrame (LOF)
remoteAlarmIndication (RAI)
alarmIndicationSignal (AIS)
bufferUnderflow (BU)
and in addition for E1:
lossOfMultiframe (LOMF)
receiveMultiframeRemoteAlarmIndication (RMRAI)ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.1 |
mscLpDS3DS1ChanTcEgressConditioningThis attribute indicates the status of locally generated trunk
conditioning towards the PDH line.
When trunk conditioning is being locally generated towards the
PDH line, egressConditioning is set to on.
When trunk conditioning is not being locally generated towards the
PDH line, egressConditioning is set to off.
Trunk conditioning is transmitted towards the PDH line under the
following conditions:
bufferUnderflow (BU)
AAL1 protocol errors.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.2 |
mscLpDS3DS1ChanTcSigOneTableThis attribute specifies the value to be substituted into the ABCD
signaling bits for the timeslots defined by the Chan component
under fault conditions. The value will be substituted for the duration
provisioned in signalOneDuration when a lineType that uses CAS
has been defined.
For a lineType of d4Cas (Super Frame), signaling bits C and D are
required to equal bits A and B respectively. SEQUENCE OF MscLpDS3DS1ChanTcSigOneEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398 |
mscLpDS3DS1ChanTcSigOneEntryAn entry in the mscLpDS3DS1ChanTcSigOneTable. MscLpDS3DS1ChanTcSigOneEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1 |
mscLpDS3DS1ChanTcSigOneIndexThis variable represents the mscLpDS3DS1ChanTcSigOneTable
specific index for the mscLpDS3DS1ChanTcSigOneTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.1 |
mscLpDS3DS1ChanTcSigOneValueThis variable represents an individual value for the
mscLpDS3DS1ChanTcSigOneTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.2 |
mscLpDS3DS1ChanTcSigTwoTableThis attribute specifies the value to be substituted into the ABCD
signaling bits for the timeslots defined by the Chan component
under fault conditions. The value will be substituted after the
duration provisioned in signalOneDuration has expired and when a
lineType that uses CAS has been defined.
For a lineType of d4Cas (Super Frame), signaling bits C and D are
required to equal bits A and B respectively. SEQUENCE OF MscLpDS3DS1ChanTcSigTwoEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399 |
mscLpDS3DS1ChanTcSigTwoEntryAn entry in the mscLpDS3DS1ChanTcSigTwoTable. MscLpDS3DS1ChanTcSigTwoEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1 |
mscLpDS3DS1ChanTcSigTwoIndexThis variable represents the mscLpDS3DS1ChanTcSigTwoTable
specific index for the mscLpDS3DS1ChanTcSigTwoTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.1 |
mscLpDS3DS1ChanTcSigTwoValueThis variable represents an individual value for the
mscLpDS3DS1ChanTcSigTwoTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.2 |
mscLpDS3DS1ChanProvTableThis group contains all of the provisional data for a Channel
component. SEQUENCE OF MscLpDS3DS1ChanProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.10 |
mscLpDS3DS1ChanProvEntryAn entry in the mscLpDS3DS1ChanProvTable. MscLpDS3DS1ChanProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1 |
mscLpDS3DS1ChanTimeslotsThis attribute contains the list of timeslots that are used by the
Channel component. Valid numbers are 1-24 for a Channel used by
a DS1 component, and 1-31 for a Channel used by an E1
component.
Description of bits:
notused0(0)
n1(1)
n2(2)
n3(3)
n4(4)
n5(5)
n6(6)
n7(7)
n8(8)
n9(9)
n10(10)
n11(11)
n12(12)
n13(13)
n14(14)
n15(15)
n16(16)
n17(17)
n18(18)
n19(19)
n20(20)
n21(21)
n22(22)
n23(23)
n24(24)
n25(25)
n26(26)
n27(27)
n28(28)
n29(29)
n30(30)
n31(31)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.1 |
mscLpDS3DS1ChanTimeslotDataRateThis attribute selects the data rate of the timeslots in a channel of a
DS1 component. For E1, the data rate of the timeslots will always
be 64kbit/s regardless of this attribute.
When doNotOverride is selected for a channel on a DS1, the data
rate of the channel's timeslots are dependant on the zeroCoding
selection of the DS1 component. If the zeroCoding is B8ZS (where
supported on the FP) or none, the timeslot's data rate will be 64kbit/
s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot
will be 56kbit/s.
When 56k is selected for a channel on a DS1, the least significant
bit of each timeslot of this Channel will always be set to 1 and not
used for data. The data rate for the timeslots of this channel is
therefore restricted to 56kbit/s.
One application of this attribute is to allow a DS1 line to support
mixing channels that originate from lines that use different
zeroCoding schemes.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.2 |
mscLpDS3DS1ChanApplicationFramerNameThis attribute defines the link to the software stack. It defines which
application is running on top of this hardware component.rw Link .1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.3 |
mscLpDS3DS1ChanCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpDS3DS1ChanCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.11 |
mscLpDS3DS1ChanCidDataEntryAn entry in the mscLpDS3DS1ChanCidDataTable. MscLpDS3DS1ChanCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1 |
mscLpDS3DS1ChanCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1.1 |
mscLpDS3DS1ChanIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpDS3DS1ChanIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.12 |
mscLpDS3DS1ChanIfEntryEntryAn entry in the mscLpDS3DS1ChanIfEntryTable. MscLpDS3DS1ChanIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1 |
mscLpDS3DS1ChanIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.1 |
mscLpDS3DS1ChanIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.2 |
mscLpDS3DS1ChanOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpDS3DS1ChanOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.13 |
mscLpDS3DS1ChanOperStatusEntryAn entry in the mscLpDS3DS1ChanOperStatusTable. MscLpDS3DS1ChanOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1 |
mscLpDS3DS1ChanSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1.1 |
mscLpDS3DS1ChanStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpDS3DS1ChanStateEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14 |
mscLpDS3DS1ChanStateEntryAn entry in the mscLpDS3DS1ChanStateTable. MscLpDS3DS1ChanStateEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1 |
mscLpDS3DS1ChanAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.1 |
mscLpDS3DS1ChanOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.2 |
mscLpDS3DS1ChanUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.3 |
mscLpDS3DS1ChanAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.4 |
mscLpDS3DS1ChanProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.5 |
mscLpDS3DS1ChanControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.6 |
mscLpDS3DS1ChanAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.7 |
mscLpDS3DS1ChanStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.8 |
mscLpDS3DS1ChanUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.9 |
mscLpDS3DS1ChanOperTableThis group contains all of the operational data for a Channel
component. SEQUENCE OF MscLpDS3DS1ChanOperEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.15 |
mscLpDS3DS1ChanOperEntryAn entry in the mscLpDS3DS1ChanOperTable. MscLpDS3DS1ChanOperEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1 |
mscLpDS3DS1ChanActualChannelSpeedThis attribute displays the measured link speed of the Channel
component.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1.1 |
mscLpDS3DS1ChanAdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpDS3DS1ChanAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.16 |
mscLpDS3DS1ChanAdminInfoEntryAn entry in the mscLpDS3DS1ChanAdminInfoTable. MscLpDS3DS1ChanAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1 |
mscLpDS3DS1ChanVendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.1 |
mscLpDS3DS1ChanCommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.2 |
mscLpDS3DS1Test OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.5.6.3 |
mscLpDS3DS1TestRowStatusTableThis entry controls the addition and deletion of
mscLpDS3DS1Test components. SEQUENCE OF MscLpDS3DS1TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.3.1 |
mscLpDS3DS1TestRowStatusEntryA single entry in the table represents a single
mscLpDS3DS1Test component. MscLpDS3DS1TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1 |
mscLpDS3DS1TestRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS3DS1Test components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.1 |
mscLpDS3DS1TestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.2 |
mscLpDS3DS1TestStorageTypeThis variable represents the storage type value for the
mscLpDS3DS1Test tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.4 |
mscLpDS3DS1TestIndexThis variable represents the index for the mscLpDS3DS1Test tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.10 |
mscLpDS3DS1TestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpDS3DS1TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.3.10 |
mscLpDS3DS1TestStateEntryAn entry in the mscLpDS3DS1TestStateTable. MscLpDS3DS1TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1 |
mscLpDS3DS1TestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.1 |
mscLpDS3DS1TestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.2 |
mscLpDS3DS1TestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.3 |
mscLpDS3DS1TestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpDS3DS1TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.3.11 |
mscLpDS3DS1TestSetupEntryAn entry in the mscLpDS3DS1TestSetupTable. MscLpDS3DS1TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1 |
mscLpDS3DS1TestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.1 |
mscLpDS3DS1TestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.2 |
mscLpDS3DS1TestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.3 |
mscLpDS3DS1TestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.4 |
mscLpDS3DS1TestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.5 |
mscLpDS3DS1TestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.6 |
mscLpDS3DS1TestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.7 |
mscLpDS3DS1TestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.8 |
mscLpDS3DS1TestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpDS3DS1TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12 |
mscLpDS3DS1TestResultsEntryAn entry in the mscLpDS3DS1TestResultsTable. MscLpDS3DS1TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1 |
mscLpDS3DS1TestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.1 |
mscLpDS3DS1TestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.2 |
mscLpDS3DS1TestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.3 |
mscLpDS3DS1TestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.4 |
mscLpDS3DS1TestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.5 |
mscLpDS3DS1TestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.6 |
mscLpDS3DS1TestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.7 |
mscLpDS3DS1TestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.8 |
mscLpDS3DS1TestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.9 |
mscLpDS3DS1TestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.10 |
mscLpDS3DS1TestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.11 |
mscLpDS3DS1ProvTableThis group contains all of the provisioning data for a DS1
component. SEQUENCE OF MscLpDS3DS1ProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.10 |
mscLpDS3DS1ProvEntryAn entry in the mscLpDS3DS1ProvTable. MscLpDS3DS1ProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.10.1 |
mscLpDS3DS1LineTypeThis attribute defines the framing of the DS1 tributary.
d4 defines a framing pattern of 12 frames per multiframe.
esf defines a framing pattern of 24 frames per multiframe.
d4Cas defines a framing pattern of 12 frames per multiframe with
channel associated signalling.
esfCas defines a framing pattern of 24 frames per multiframe with
channel associated signalling.
For the 4pDS3ChAtm card, only d4 and esf framing patterns are
permitted.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.1 |
mscLpDS3DS1ZeroCodingThis attribute defines the zero encoding on the DS1 tributary.
bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's
density. This reduces the available bandwidth of the channel by 1/8.
none does no zero encoding.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.2 |
mscLpDS3DS1ClockingSourceThis attribute defines the source of the transmit clock for the DS1
tributary.
When the clocking source is selected from local, the crystal on the
port generates the clocking for the DS1 tributary.
When the clocking source is selected from line, the port
synchronizes to the clock from the DS1 tributary.
When the clocking source is selected from module, the ports clock
synchronizes to the clock provided by the oscillator on the active
CP.
On a 1pDS3C card, if the NetworkSynchronization (NS) component
is present the default value of this attribute will be module otherwise
it will be line.
On a 2pDS3cAal or 4pDS3ChAtm card, the only valid values are
local and module. If the NS component is present the default value
of this attribute will be module otherwise it will be local.
On a 4pDS3ChAtm card the clocking source for all DS1 and all
DS3 components on card must be the same, except when a DS1 is
using line as a clocking source.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.3 |
mscLpDS3DS1CidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpDS3DS1CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.11 |
mscLpDS3DS1CidDataEntryAn entry in the mscLpDS3DS1CidDataTable. MscLpDS3DS1CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.11.1 |
mscLpDS3DS1CustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.5.6.11.1.1 |
mscLpDS3DS1AdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpDS3DS1AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.12 |
mscLpDS3DS1AdminInfoEntryAn entry in the mscLpDS3DS1AdminInfoTable. MscLpDS3DS1AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.12.1 |
mscLpDS3DS1VendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.1 |
mscLpDS3DS1CommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.2 |
mscLpDS3DS1IfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpDS3DS1IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.13 |
mscLpDS3DS1IfEntryEntryAn entry in the mscLpDS3DS1IfEntryTable. MscLpDS3DS1IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.13.1 |
mscLpDS3DS1IfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.1 |
mscLpDS3DS1IfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.2 |
mscLpDS3DS1OperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpDS3DS1OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.14 |
mscLpDS3DS1OperStatusEntryAn entry in the mscLpDS3DS1OperStatusTable. MscLpDS3DS1OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.14.1 |
mscLpDS3DS1SnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.14.1.1 |
mscLpDS3DS1StateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpDS3DS1StateEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.15 |
mscLpDS3DS1StateEntryAn entry in the mscLpDS3DS1StateTable. MscLpDS3DS1StateEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.15.1 |
mscLpDS3DS1AdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.1 |
mscLpDS3DS1OperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.2 |
mscLpDS3DS1UsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.3 |
mscLpDS3DS1AvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.4 |
mscLpDS3DS1ProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.5 |
mscLpDS3DS1ControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.6 |
mscLpDS3DS1AlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.7 |
mscLpDS3DS1StandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.8 |
mscLpDS3DS1UnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.9 |
mscLpDS3DS1OperTableThis group contains the common operational data for a component
in a digital hierarchy interface. SEQUENCE OF MscLpDS3DS1OperEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.16 |
mscLpDS3DS1OperEntryAn entry in the mscLpDS3DS1OperTable. MscLpDS3DS1OperEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.16.1 |
mscLpDS3DS1RxAisAlarmThis attribute indicates whether an AIS (Alarm Indication Signal)
alarm state has been entered. The AIS Alarm state is entered when
AIS defects have been observed and accumulated for 2.5 seconds
+/- 0.5 seconds. An AIS defect is detected after having received less
than 3 zeros in a 2048 bit period. If the AIS defects are
intermittently occurring, the AIS defect accumulator is decremented
at a rate of 1/10 of the incrementing rate (alarm integration ratio of
1/10), with all measurements based on a 200 ms polling cycle. This
tributary goes into an operationalState of disabled for the duration
of an AIS alarm state.
The AIS alarm state is cleared when AIS defects are absent for 10
seconds +/- 0.5 seconds.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.1 |
mscLpDS3DS1LofAlarmThis attribute indicates whether a LOF (Loss of Frame) alarm state
has been entered. The LOF alarm state is entered when LOF defects
(2 out of 5 framing bits in error ) have been detected for 3 seconds
+/- 0.5 seconds. If the LOF defects are intermittently occurring, the
LOF defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle. This tributary goes
into an operationalState of disabled until the LOF alarm state is
cleared. Also, an RAI alarm is transmitted to the far end for the
duration of the LOF alarm state
The condition is cleared when framing has been achieved for 10
seconds +/- 0.5 seconds.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.2 |
mscLpDS3DS1RxRaiAlarmThis attribute indicates whether an RAI (Remote Alarm Indication)
alarm state has been entered. An RAI alarm state is entered when
the RAI defect indicator has been observed and accumulated for 3.5
seconds +/- 0.5 seconds. If the RAI defects are intermittently
occurring, the RAI defect accumulator is decremented at a rate of 1/
10 of the incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The RAI alarm state is cleared when the RAI defect indicator has
been absent for 10 seconds +/- 0.5 seconds. The RAI alarm is
usually an indication that the far end facility is unable to gain
synchronization.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.3 |
mscLpDS3DS1TxAisAlarmThis attribute indicates whether an AIS (Alarm Indication Signal)
alarm is being transmitted on the line. An AIS alarm is transmitted
when the tributary is in a locked state.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.4 |
mscLpDS3DS1TxRaiAlarmThis attribute indicates whether a RAI signal is being sent on the
outgoing line. The RAI signal is transmitted when the tributary
detects a LOF alarm condition.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.5 |
mscLpDS3DS1StatsTableThis group contains the common statistical data for a component in
a digital hierarchy interface. SEQUENCE OF MscLpDS3DS1StatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.17 |
mscLpDS3DS1StatsEntryAn entry in the mscLpDS3DS1StatsTable. MscLpDS3DS1StatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.6.17.1 |
mscLpDS3DS1RunningTimeThis attribute counts the number of seconds since the tributary was
activated.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.1 |
mscLpDS3DS1ErrorFreeSecThis attribute counts the number of seconds that the tributary has
been in an error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.2 |
mscLpDS3DS1ErroredSecThis attribute counts the number of errored seconds the tributary has
counted since it was activated. An errored second is declared when
a second with one or more Code Violation Error events, or one or
more Out Of Frame events occurs. A code violation error may be a
CRC error or a BPV error. An Out Of Frame event occurs when 2
out of 5 framing bits are in error.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.3 |
mscLpDS3DS1SevErroredSecThis attribute counts the number of severely errored seconds the
tributary has counted since it was activated. A severely errored
second occurs when a second with 320 or more Code Violation
Error events or one or more Out Of Frame events occurs.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.4 |
mscLpDS3DS1SevErroredFrmSecThis attribute counts the number of severely errored framing
seconds the tributary has counted since it was activated A severely
errored framing second occurs when a second with one or more Out
Of Frame events occurs.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.5 |
mscLpDS3DS1UnavailSecThis attribute counts the total number of seconds that the tributary
has been in an unavailable signal state. An unavailable signal state
occurs at the onset of 10 consecutive Severely Errored Seconds. The
state is cleared at the onset of 10 seconds with no Severely Errored
Seconds.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.6 |
mscLpDS3DS1CrcErrorsThis attribute counts the total number of CRC-6 errors. These will
only be counted when the lineType is esf.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.7 |
mscLpDS3DS1FrmErrorsThis attribute counts the total number of frame errors. A frame error
is an error in the framing bits.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.8 |
mscLpDS3DS1SlipErrorsThe total number of times that the line experienced a controlled
frame slip.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.9 |
mscLpDS3ProvTableThis group contains all of the provisioning data for a DS3
component. SEQUENCE OF MscLpDS3ProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.10 |
mscLpDS3ProvEntryAn entry in the mscLpDS3ProvTable. MscLpDS3ProvEntry .1.3.6.1.4.1.562.36.2.1.12.5.10.1 |
mscLpDS3CbitParityThis attribute indicates if C-Bit parity has been turned ON or OFF.
The CBIT component will appear under the DS3 component when
the cbitParity attribute is set to on.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.10.1.1 |
mscLpDS3LineLengthThis attribute defines the line length for equalization calculations
for the DS3 line. The range is between 0 and 450 feet (1 metre =
3.28 feet).
Note: There are currently only two ranges as far as the equalization
calculation performed on the FP is concerned: 0 to 224ft and 225 to
450ft.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.5.10.1.2 |
mscLpDS3ClockingSourceThis attribute defines the type of clocking source used for
synchronizing the DS3 transmit clock: local means direct use of the
local clock oscillator at its centre frequency; line means use of a
signal phase-locked to the incoming DS3 line rate; module means
the use of a signal phase-locked to the CP reference clock.
Note that the multiport cell-based cards have one common clock
source for all ports. For this reason, the following rules apply for the
value of clockingSource across the board's three ports:
All three clockingSource values must be 'local' OR
All three clockingSource values must be 'module' OR
One clockingSource value must be 'line' and the other two must be
'otherPort'.
If there is no NS component provisioned, the default value for this
attribute will be local. If the NS component has been provisioned,
the default value is module, except for the 1pDS3C cards.
For the 1pDS3C cards, the default and only valid value for this
attribute is local. The clockingSource of the DS1 sub-component
becomes the effective clocking source for this attribute. All the DS1
sub-components have the same clocking source.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.10.1.3 |
mscLpDS3ApplicationFramerNameThis attribute defines the link to the software stack. It defines which
application is running on top of the DS3 component.rw Link .1.3.6.1.4.1.562.36.2.1.12.5.10.1.4 |
mscLpDS3MappingThis attribute indicates if ATM cells will be mapped directly into
the DS3 payload, or whether PLCP mapping will be used. The
PLCP component will appear under the DS3 component when this
attribute is set to plcp. This attribute will be ignored when set on
frame-based cards.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.10.1.5 |
mscLpDS3CidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpDS3CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.5.11 |
mscLpDS3CidDataEntryAn entry in the mscLpDS3CidDataTable. MscLpDS3CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.5.11.1 |
mscLpDS3CustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.5.11.1.1 |
mscLpDS3AdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpDS3AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.5.12 |
mscLpDS3AdminInfoEntryAn entry in the mscLpDS3AdminInfoTable. MscLpDS3AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.5.12.1 |
mscLpDS3VendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.12.1.1 |
mscLpDS3CommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.5.12.1.2 |
mscLpDS3IfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpDS3IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.5.13 |
mscLpDS3IfEntryEntryAn entry in the mscLpDS3IfEntryTable. MscLpDS3IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.5.13.1 |
mscLpDS3IfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.13.1.1 |
mscLpDS3IfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.5.13.1.2 |
mscLpDS3OperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpDS3OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.14 |
mscLpDS3OperStatusEntryAn entry in the mscLpDS3OperStatusTable. MscLpDS3OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.5.14.1 |
mscLpDS3SnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.14.1.1 |
mscLpDS3StateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpDS3StateEntry .1.3.6.1.4.1.562.36.2.1.12.5.15 |
mscLpDS3StateEntryAn entry in the mscLpDS3StateTable. MscLpDS3StateEntry .1.3.6.1.4.1.562.36.2.1.12.5.15.1 |
mscLpDS3AdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.15.1.1 |
mscLpDS3OperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.15.1.2 |
mscLpDS3UsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.15.1.3 |
mscLpDS3AvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.15.1.4 |
mscLpDS3ProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.15.1.5 |
mscLpDS3ControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.15.1.6 |
mscLpDS3AlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.5.15.1.7 |
mscLpDS3StandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.15.1.8 |
mscLpDS3UnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.15.1.9 |
mscLpDS3OperTableThis group contains the common operational data for DS3
component. SEQUENCE OF MscLpDS3OperEntry .1.3.6.1.4.1.562.36.2.1.12.5.16 |
mscLpDS3OperEntryAn entry in the mscLpDS3OperTable. MscLpDS3OperEntry .1.3.6.1.4.1.562.36.2.1.12.5.16.1 |
mscLpDS3LosAlarmThis attribute displays whether a Loss Of Signal (LOS) alarm state
has been entered. An LOS alarm state is entered when LOS defects
have been observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds. An LOS defect is detected at the DS3 line interface
upon observing 175 +/- 75 continuous pulse positions with no
pulses of either positive or negative polarity. If the LOS defects are
intermittently occurring, the LOS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The DS3 component goes into an operational state of disabled until
the LOS alarm condition is cleared. The LOS alarm state is cleared
after LOS defects have been absent for a period of 10 seconds +/-
0.5 seconds.
The losAlarm attribute is always set to off when the component has
been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.16.1.1 |
mscLpDS3LofAlarmThis attribute displays whether a Loss Of Frame (LOF) alarm state
has been entered. An LOF alarm state is entered when Severely
Errored Frame (SEF) defects have been observed and accumulated
for a period of 2.5 seconds +/- 0.5 seconds. A SEF defect is
detected when 3 (or more) out of 16 (or fewer) F-bits are in error, or
one (or more) M-bits in two (or more) out of four (or fewer)
consecutive M-frames are in error. If the LOF defects are
intermittently occurring, the LOF defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The DS3 component goes into an operational state of disabled until
the LOF alarm condition is cleared. The condition is cleared when
framing has been achieved for a period of 10 seconds +/- 0.5
seconds. As long as SEF defects are detected, the node also
transmits the far-end SEF/AIS defect indicator over the outgoing
line. When not running in C-Bit Parity mode, the txRai attribute is
also set to on when transmitting the far-end SEF/AIS defect
indicator on the outgoing line.
The lofAlarm attribute is always set to off when the component has
been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.16.1.2 |
mscLpDS3RxAisAlarmThis attribute displays whether an Alarm Indication Signal (AIS)
alarm state has been entered. An AIS alarm state is entered when
AIS defects have been observed and accumulated for 2.5 seconds +/
- 0.5 seconds. An AIS defect is the occurrence of AIS (valid DS3
frame with payload containing the 1010...sequence and with C-Bits
set to zero) in contiguous M-frames for a time greater than 100
milliseconds. If the AIS defects are intermittently occurring, the
AIS defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The DS3 component goes into an operational state of disabled until
the AIS alarm condition is cleared (after AIS has been no longer
detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS
is detected, the node also transmits the far-end SEF/AIS defect
indicator over the outgoing line. When not running in C-Bit Parity
mode, the txRai attribute is also set to on when transmitting the far-
end SEF/AIS defect indicator on the outgoing line.
The rxAisAlarm attribute is always set to off when the component
has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.16.1.3 |
mscLpDS3RxRaiAlarmThis attribute displays whether a Remote Alarm Indication (RAI)
alarm state has been entered.
When not running the C-Bit Parity mode, the RAI alarm state is
entered when the far-end SEF/AIS defect indicator has been
observed and accumulated for a period of 2.5 seconds +/- 0.5
seconds on the incoming DS3 line. If the RAI defects are
intermittently occurring, the RAI defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle. The DS3 component goes into an operational state of
disabled until the RAI alarm condition is cleared. The condition is
cleared when the far-end SEF/AIS defect indicator has not been
detected for 10 seconds +/- 0.5 seconds.
When running the C-Bit Parity mode, the RAI alarm state is entered
upon detection of a far-end alarm over the Far-End Alarm and
Control (FEAC) channel. The RAI alarm state is exited as soon as
no more far-end alarm is detected on the FEAC channel. The far-
end alarms that can be detected on the FEAC channel and that cause
the RAI alarm state to be entered are: equipment failure alarm
(service affecting), LOS alarm, LOF alarm, idle and AIS alarm.
The rxRaiAlarm attribute is always set to off when the component
has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.16.1.4 |
mscLpDS3RxIdleThis attribute displays whether an Idle failure condition has been
reported on the DS3 port. An Idle condition is reported when DS3
Idle defects have been observed and accumulated for a period of 2.5
seconds +/- 0.5 seconds. The DS3 Idle defect is the occurrence of a
valid DS3 frame with the information bits set to a 11001100..
sequence. If the DS3 Idle defects are intermittently occurring, the
DS3 Idle defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The DS3 component goes into an operational state of disabled until
the Idle failure condition is cleared. The failure condition is cleared
when the DS3 idle pattern has not been detected for at least 10
seconds +/- 0.5 seconds.
The rxIdle attribute is always set to off when the component has
been locked and left offline.
The idle pattern indicates that the far-end is physically connected
but not put in service. For instance, DS3 idle is transmitted on the
outgoing line when the DS3 component is locked and not used for
operational testing.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.16.1.5 |
mscLpDS3TxAisThis attribute displays whether an Alarm Indication Signal (AIS)
alarm is being transmitted on the DS3 line. Currently, AIS is never
transmitted by a Passport DS3 node.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.16.1.6 |
mscLpDS3TxRaiWhen not running C-Bit Parity mode, this attribute displays whether
the far-end SEF/AIS defect indicator is transmitted over the
outgoing line when the DS3 component has been unlocked or used
in operational testing. When running in C-Bit Parity mode, this
attribute displays whether a far-end alarm is sent over the Far-End
Alarm and Control (FEAC) channel when the DS3 component has
been unlocked or used in operational testing. When the DS3
component is locked and not used in operational testing, this
attribute is always set to off.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.16.1.7 |
mscLpDS3TxIdleThis attribute displays whether the DS3 Idle signal is transmitted
over the outgoing line. DS3 Idle is sent when the DS3 component
has been locked and not used in operational testing.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.5.16.1.8 |
mscLpDS3StatsTableThis group contains the specific DS3 common operational data for a
DS3 component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpDS3StatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.17 |
mscLpDS3StatsEntryAn entry in the mscLpDS3StatsTable. MscLpDS3StatsEntry .1.3.6.1.4.1.562.36.2.1.12.5.17.1 |
mscLpDS3RunningTimeThis attribute indicates the total number of seconds since the DS3
component has been activated and been in unlocked state or used
for operational testing. All the other error counts that follow as well
as each DS3 subcomponent's error counts can be updated when this
count is active.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.1 |
mscLpDS3ErrorFreeSecThis attribute indicates the number of seconds that the DS3 port has
been in an error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.2 |
mscLpDS3LineCodeViolationsThis attribute indicates the total number of Line Code Violations
(LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV
counting is inhibited for second intervals where Line Severely
Errored Second (LSES) is counted.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.3 |
mscLpDS3LineErroredSecThis attribute indicates the total number of Line Errored Seconds
(LES) that have been counted. A LES is declared for second
intervals containing one or more LCV or one or more Loss Of
Signal (LOS) defects.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.4 |
mscLpDS3LineSevErroredSecThis attribute indicates the total number of Line Severely Errored
Seconds (LSES) that have been counted. A LSES is declared for
second intervals containing more than 44 LCVs or one or more
LOS defects.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.5 |
mscLpDS3LineLosSecThis attribute indicates the total number of Line LOS Seconds
(LOSS) that have been counted. A LOSS is declared for second
intervals containing one or more LOS defects.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.6 |
mscLpDS3LineFailuresThis attribute indicates the total number of times that a line failure
(LOS failure) has been declared.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.7 |
mscLpDS3PathCodeViolationsThis attribute indicates the total number of Path Code Violations
(PCVs) detected. Each PCV corresponds to a P-bit parity error, or
possibly a frame error or a disagreement between P-bits or X-bits.
PCV counting is inhibited over second intervals where a Path
Severely Errored Second (PSES) is counted. Counting of PCVs is
also inhibited over second intervals where a Path Unavailable
Second (PUAS) is counted.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.8 |
mscLpDS3PathErroredSecThis attribute indicates the total number of Path Errored Seconds
(PESs) that have been counted. A PES is declared for second
intervals containing one or more Path Code Violations (PCV) or one
or more Severely Errored Frame (SEF) or Alarm Indication Signal
(AIS) defects. Counting of Path Errored Seconds is inhibited when
Path Unavailable Seconds (PUAS) is counted over the monitored
second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.9 |
mscLpDS3PathSevErroredSecThis attribute indicates the total number of Path Severely Errored
Seconds (PSESs) that have been counted. A PSES is declared for
second intervals containing more than 44 PCVs or one or more SEF
or AIS defects. Counting of PSESs is inhibited when Path
Unavailable Seconds (PUAS) is counted over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.10 |
mscLpDS3PathSefAisSecThis attribute indicates the total number of SEF/AIS Seconds
(PSASs). A PSAS is declared for second intervals containing one or
more Severely Errored Frame (SEF) or Alarm Indication Signal
(AIS) defects. Counting of PSAS is inhibited when Path
Unavailable Seconds (PUAS) is counted over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.11 |
mscLpDS3PathUnavailSecThis attribute indicates the total number of one second intervals for
which the DS3 path is unavailable. The DS3 path becomes
unavailable at the onset of 10 consecutive Path Severely Errored
Seconds (PSES). The 10 PSESs are included in the unavailable
time. Once unavailable, the DS3 path becomes available at the onset
of 10 contiguous seconds with no PSES. The 10 seconds with no
PSES are excluded from the unavailable time. For second intervals
where PUAS is counted, counting of Path Coding Violations (PCV),
Path Errored Seconds (PES), Path Severely Errored Seconds (PSES)
and Path Sef/Ais Seconds (PSAS) is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.12 |
mscLpDS3PathFailuresThis attribute indicates the total number of times that a path failure
(LOF/AIS failure) has been declared.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.5.17.1.13 |
mscLpE3 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.6 |
mscLpE3RowStatusTableThis entry controls the addition and deletion of
mscLpE3 components. SEQUENCE OF MscLpE3RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.1 |
mscLpE3RowStatusEntryA single entry in the table represents a single
mscLpE3 component. MscLpE3RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.1.1 |
mscLpE3RowStatusThis variable is used as the basis for SNMP naming of
mscLpE3 components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.1.1.1 |
mscLpE3ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.1.1.2 |
mscLpE3StorageTypeThis variable represents the storage type value for the
mscLpE3 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.1.1.4 |
mscLpE3IndexThis variable represents the index for the mscLpE3 tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.6.1.1.10 |
mscLpE3Test OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.6.2 |
mscLpE3TestRowStatusTableThis entry controls the addition and deletion of
mscLpE3Test components. SEQUENCE OF MscLpE3TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.2.1 |
mscLpE3TestRowStatusEntryA single entry in the table represents a single
mscLpE3Test component. MscLpE3TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.2.1.1 |
mscLpE3TestRowStatusThis variable is used as the basis for SNMP naming of
mscLpE3Test components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.1 |
mscLpE3TestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.2 |
mscLpE3TestStorageTypeThis variable represents the storage type value for the
mscLpE3Test tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.4 |
mscLpE3TestIndexThis variable represents the index for the mscLpE3Test tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.10 |
mscLpE3TestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpE3TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.6.2.10 |
mscLpE3TestStateEntryAn entry in the mscLpE3TestStateTable. MscLpE3TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.6.2.10.1 |
mscLpE3TestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.1 |
mscLpE3TestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.2 |
mscLpE3TestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.3 |
mscLpE3TestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpE3TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.6.2.11 |
mscLpE3TestSetupEntryAn entry in the mscLpE3TestSetupTable. MscLpE3TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.6.2.11.1 |
mscLpE3TestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.1 |
mscLpE3TestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.2 |
mscLpE3TestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.3 |
mscLpE3TestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.4 |
mscLpE3TestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.5 |
mscLpE3TestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.6 |
mscLpE3TestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.7 |
mscLpE3TestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.8 |
mscLpE3TestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpE3TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.6.2.12 |
mscLpE3TestResultsEntryAn entry in the mscLpE3TestResultsTable. MscLpE3TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1 |
mscLpE3TestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.1 |
mscLpE3TestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.2 |
mscLpE3TestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.3 |
mscLpE3TestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.4 |
mscLpE3TestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.5 |
mscLpE3TestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.6 |
mscLpE3TestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.7 |
mscLpE3TestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.8 |
mscLpE3TestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.9 |
mscLpE3TestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.10 |
mscLpE3TestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.11 |
mscLpE3G832 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.6.3 |
mscLpE3G832RowStatusTableThis entry controls the addition and deletion of
mscLpE3G832 components. SEQUENCE OF MscLpE3G832RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.3.1 |
mscLpE3G832RowStatusEntryA single entry in the table represents a single
mscLpE3G832 component. MscLpE3G832RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.3.1.1 |
mscLpE3G832RowStatusThis variable is used as the basis for SNMP naming of
mscLpE3G832 components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.1 |
mscLpE3G832ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.2 |
mscLpE3G832StorageTypeThis variable represents the storage type value for the
mscLpE3G832 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.4 |
mscLpE3G832IndexThis variable represents the index for the mscLpE3G832 tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.10 |
mscLpE3G832ProvisionedTableThis group contains the provisionable data for the G832 component. SEQUENCE OF MscLpE3G832ProvisionedEntry .1.3.6.1.4.1.562.36.2.1.12.6.3.10 |
mscLpE3G832ProvisionedEntryAn entry in the mscLpE3G832ProvisionedTable. MscLpE3G832ProvisionedEntry .1.3.6.1.4.1.562.36.2.1.12.6.3.10.1 |
mscLpE3G832TrailTraceTransmittedThis attribute indicates the E.164 address which is to be encoded in
the trail access point identifier, which is transmitted using the Trail
Trace (TR) field of the transmitted E3 Frame.
Both the expected trail access point identifier and the transmitted
trail access point identifier are provisionable attributes of the G832
component.
The 16 byte Trail Trace frame is composed of one byte containing a
frame start marker and a CRC-7 calculation over the previous
frame, and 15 bytes for transporting an E.164 address. If less than
the full 15 bytes are used, the address is padded with NULL
characters.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.1 |
mscLpE3G832TrailTraceExpectedThis attribute indicates the E.164 address which is expected in the
trail access point identifier, which is transmitted using the Trail
Trace (TR) field of the transmitted E3 Frame.
Both the expected trail access point identifier and the transmitted
trail access point identifier are provisionable attributes of the G832
component.
The 16 byte Trail Trace frame is composed of one byte containing a
frame start marker and a CRC-7 calculation over the previous
frame, and 15 bytes for transporting an E.164 address. If less than
the full 15 bytes are used, the address is padded with NULL
characters.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.2 |
mscLpE3G832OperationalTableThis group contains the operational data for the G832 component. SEQUENCE OF MscLpE3G832OperationalEntry .1.3.6.1.4.1.562.36.2.1.12.6.3.11 |
mscLpE3G832OperationalEntryAn entry in the mscLpE3G832OperationalTable. MscLpE3G832OperationalEntry .1.3.6.1.4.1.562.36.2.1.12.6.3.11.1 |
mscLpE3G832UnexpectedPayloadTypeThis attribute displays whether the Unexpected Payload Type (UPT)
alarm state has been entered. The UPT alarm state is entered when
UPT defects have been observed and accumulated for a period of
2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a
received frame fails to agree with the expected Payload Type. If the
UPT defects are intermittently occurring, the UPT defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle..
The UPT alarm is cleared when the Payload Type in the received
frame agrees with the expected Payload Type for a period of 10
seconds +/- 0.5 seconds.
The unexpectedPayloadType attribute is always set to off when the
E3 component has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.1 |
mscLpE3G832TrailTraceMismatchThis attribute displays whether the Trail Trace Mismatch (TTM)
alarm state has been entered. The TTM alarm state is entered when
TTM defects have been observed and accumulated for a period of
2.5 seconds +/- 0.5 seconds. The TTM defect is reported when the
trail access point identifier contained in the Trail Trace (TR) field in
the received frame fails to agree with the expected identifier. If the
TTM defects are intermittently occurring, the TTM defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle.
The TTM alarm is cleared when the trail access point identifier in
the received frame agrees with the expected identifier for a period of
10 seconds +/- 0.5 seconds.
The trailTraceMismatch attribute is always set to off when the E3
component has been locked and left offline.
Both the expected trail access identifier and the transmitted trail
access identifier are provisionable attributes of the G832
component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.2 |
mscLpE3G832TimingMarkerIndicates whether or not the timing source at the far-end node is
traceable to a Primary Reference Clock.
The timingMarker indication is controlled by the timing marker bit
in the G832 MA byte. If the received timing marker bit is 1 for five
consecutive frames, and five consecutive 0s are not received for two
seconds, the timingMarker indication will be set to not traceable. If
the received timing marker bit is 0 for five consecutive frames and
five consecutive 1s are not received for two seconds, the
timingMarker indication will be set to traceable.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.3 |
mscLpE3G832TrailTraceReceivedThis attribute indicates the 15 byte E.164 address which is currently
being received in the trail trace (TR) field of the E3 G832 frame. If
this attribute differs from the provisioned trailTraceTransmitted
string a trail trace mismatch (TTM) defect is reported, possibly
resulting in a TTM alarm, as described for operational attribute
trailTraceMismatch.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.4 |
mscLpE3G832StatsTableThis group contains the statistical data for the G832 component.
Each attribute type is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero. SEQUENCE OF MscLpE3G832StatsEntry .1.3.6.1.4.1.562.36.2.1.12.6.3.12 |
mscLpE3G832StatsEntryAn entry in the mscLpE3G832StatsTable. MscLpE3G832StatsEntry .1.3.6.1.4.1.562.36.2.1.12.6.3.12.1 |
mscLpE3G832FarEndErrorFreeSecThis attribute indicates the number of seconds that the E3 line has
not suffered any G832 errors.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.1 |
mscLpE3G832FarEndCodeViolationsA count of E3 frames containing a Far-End Block Error (FEBE). A
FEBE is reported over the FEBE bit each time the far-end terminal
detects a BIP-8 error in a received E3 frame. For second intervals
where Far End Unavailable Seconds (FEUAS) or Far End Severely
Errored Seconds (FESES) are counted, counting of FECVs is
inhibited.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.2 |
mscLpE3G832FarEndErroredSecThis attribute indicates the total number of Far-End Errored
Seconds (FEES). A FEES is declared for second intervals
containing with one or more Far-End Coding Violations (FECV) or
one or more Far-End Receive Failure (FERF) defects. A FERF
defect occurs when the FERF bit in the received frame is set to one.
For second intervals where Far End Unavailable Seconds (FEUAS)
are counted, counting of FEESs is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.3 |
mscLpE3G832FarEndSevErroredSecThis attribute indicates the total number of Far-End Severely
Errored Seconds (FESESs). A FESES is declared for second
intervals containing more than 34 Far-End Coding Violations
(FECV) or one or more Far-End Receive Failure (FERF) defects.
For second intervals where a Far-End Severely Errored Seconds
(FESES) is counted, counting of FECVs is inhibited. For second
intervals where Far End Unavailable Seconds (FEUAS) are counted,
counting of FESESs is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.4 |
mscLpE3G832FarEndSefAisSecThis attribute indicates the total number of Far-End SEF/AIS
Seconds (FESAS). A FESAS is declared for second intervals
containing one or more Far-End Receive Failure (FERF) defects.
For second intervals where Far End Unavailable Seconds (FEUAS)
are counted, counting of FESAS is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.5 |
mscLpE3G832FarEndUnavailSecThis attribute indicates the total number of one second intervals for
which the E3 far-end path is unavailable. The E3 far-end path
becomes unavailable at the onset of 10 consecutive Far End
Severely Errored Seconds (FESES). It comes available at the onset
of 10 contiguous seconds with no FESES. The unavailable time
includes the initial 10 seconds to enter the unavailable state but not
the 10 seconds to exit the state For second intervals where FEUAS
is counted, counting of Far End Coding Violations (FECV), Far-
End Errored Seconds (FEES), Far-End Severely Errored Seconds
(FESES) and Far-End SefAis Seconds (FESAS) are inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.6 |
mscLpE3Plcp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.6.4 |
mscLpE3PlcpRowStatusTableThis entry controls the addition and deletion of
mscLpE3Plcp components. SEQUENCE OF MscLpE3PlcpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.4.1 |
mscLpE3PlcpRowStatusEntryA single entry in the table represents a single
mscLpE3Plcp component. MscLpE3PlcpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.4.1.1 |
mscLpE3PlcpRowStatusThis variable is used as the basis for SNMP naming of
mscLpE3Plcp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.1 |
mscLpE3PlcpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.2 |
mscLpE3PlcpStorageTypeThis variable represents the storage type value for the
mscLpE3Plcp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.4 |
mscLpE3PlcpIndexThis variable represents the index for the mscLpE3Plcp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.10 |
mscLpE3PlcpOperationalTableThis group contains the operational data for the PLCP component. SEQUENCE OF MscLpE3PlcpOperationalEntry .1.3.6.1.4.1.562.36.2.1.12.6.4.10 |
mscLpE3PlcpOperationalEntryAn entry in the mscLpE3PlcpOperationalTable. MscLpE3PlcpOperationalEntry .1.3.6.1.4.1.562.36.2.1.12.6.4.10.1 |
mscLpE3PlcpLofAlarmThis attribute displays whether a PLCP Loss Of Frame (LOF)
failure alarm state has been entered. An LOF failure is declared
when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect
occurs when an OOF (Out of Frame) state persists for more than 1
ms. If the OOF events are intermittent, the LOF defect counter is
decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3
PLCP) of the incrementing rate, with all measurements based on a
200 ms polling cycle. An OOF event (also known as a PLCP SEF
event) is declared when an error is detected in both the A1 and A2
octets, or when two consecutive POHIDs are found in error.
OOF is removed when two valid sets of framing octets and two
valid and sequential POHID octets have been found. The LOF
defect is removed when the defect counter reaches zero, i.e. when
OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms
(G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is
absent for 10.0 s +/- 0.5 s
The DS3 or E3 component goes into an operational state of disabled
until the LOF failure alarm is cleared. The terminal declaring the
LOF failure alarm will transmit a PLCP RAI signal to the far-end
for the duration of the alarm.
The lofAlarm attribute is always set to off when the DS3 or E3
component has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.1 |
mscLpE3PlcpRxRaiAlarmThis attribute displays whether a PLCP Remote Alarm Indication
(RAI) failure alarm state has been entered. An RAI failure alarm
occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte)
are high on the incoming line. An RAI failure alarm is cleared when
ten consecutive RAI bits are set to 0.
Note: Some standards call this alarm RFI.
The rxRaiAlarm attribute is always set to off when the DS3 or E3
component has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.2 |
mscLpE3PlcpStatsTableThis group contains the statistical data for the PLCP component.
Each attribute type is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero. SEQUENCE OF MscLpE3PlcpStatsEntry .1.3.6.1.4.1.562.36.2.1.12.6.4.11 |
mscLpE3PlcpStatsEntryAn entry in the mscLpE3PlcpStatsTable. MscLpE3PlcpStatsEntry .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1 |
mscLpE3PlcpErrorFreeSecThis attribute indicates the number of seconds during which the
near-end PLCP path layer had no errors.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.1 |
mscLpE3PlcpCodingViolationsThis attribute indicates the total number of BIP-8 Errors, framing
pattern octet errors, and path overhead identification errors detected
in received PLCP frames.
Counting of PLCP CV is inhibited for second intervals where PLCP
Severely Errored Framing Seconds (SEFS) or PLCP Unavailable
Seconds (UAS) are counted.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.2 |
mscLpE3PlcpErroredSecThis attribute indicates the number of seconds containing one or
more PLCP Coding Violations (CV) or in which a PLCP Severely
Errored Framing Second (SEFS) was counted.
Counting of PLCP ES is inhibited during second intervals where
PLCP Unavailable Seconds (UAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.3 |
mscLpE3PlcpSevErroredSecThis attribute indicates the number of seconds containing 5 or more
PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF
event occurred).
Counting of PLCP SES is inhibited during second intervals where
PLCP Unavailable Seconds (UAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.4 |
mscLpE3PlcpSevErroredFramingSecThis attribute indicates the number of seconds containing one or
more PLCP Severely Errored Frame (SEF) events. An SEF event is
equivalent to a PLCP OOF (Out of Frame) event.
Counting of PLCPP SEFSs is inhibited for second intervals where
PLCP Unavailable Seconds (UAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.5 |
mscLpE3PlcpUnavailSecThis attribute indicates the number of seconds when the near-end
PLCP layer is unavailable. The PLCP Path Layer becomes
unavailable at the declaration of PLCP LOF (Loss of Frame) failure
alarm state. The PLCP Path Layer becomes available again only
after clearing this condition.
For second intervals where PLCP UAS are counted, counting of
PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding
Violations (CV), PLCP Errored Seconds (ES), PLCP Severely
Errored Seconds (SES) and PLCP Far-End Severely Errored
Seconds (FESES) is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.6 |
mscLpE3PlcpFarEndErrorFreeSecThis attribute indicates the number of seconds during which the far-
end PLCP path layer had no errors.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.7 |
mscLpE3PlcpFarEndCodingViolationsThis attribute indicates the total number of PLCP Far-End Block
Errors (FEBE) reported by the far-end terminal.
Counting of FEBEs is inhibited for second intervals where PLCP
Far-End Unavailable Seconds (FEUAS) are counted.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.8 |
mscLpE3PlcpFarEndErroredSecThis attribute indicates the number of seconds containing one or
more PLCP Far-End Coding Violations (FECV).
Counting of PLCP FEES is inhibited during second intervals where
PLCP Far-End Unavailable Seconds (FEUAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.9 |
mscLpE3PlcpFarEndSevErroredSecThis attribute indicates the number of seconds containing 5 or more
PLCP Far-End Coding Violations (FECV).
Counting of PLCP FESES is inhibited for second intervals where
PLCP Far-End Unavailable Seconds (FEUAS) are counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.10 |
mscLpE3PlcpFarEndUnavailableSecThis attribute indicates the number of seconds during which the
PLCP far end is unavailable. The PLCP Path Layer becomes
unavailable at the declaration of PLCP RAI (Remote Alarm
Indication). Service becomes available again after this condition is
cleared. For second intervals where PLCP FEUAS are counted,
counting of PLCP Far-End Coding Violations (FECV), PLCP Far-
End Errored Seconds (FEES), and PLCP Far-End Severely Errored
Seconds (FESES) is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.11 |
mscLpE3Cell OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.6.5 |
mscLpE3CellRowStatusTableThis entry controls the addition and deletion of
mscLpE3Cell components. SEQUENCE OF MscLpE3CellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.5.1 |
mscLpE3CellRowStatusEntryA single entry in the table represents a single
mscLpE3Cell component. MscLpE3CellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.5.1.1 |
mscLpE3CellRowStatusThis variable is used as the basis for SNMP naming of
mscLpE3Cell components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.1 |
mscLpE3CellComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.2 |
mscLpE3CellStorageTypeThis variable represents the storage type value for the
mscLpE3Cell tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.4 |
mscLpE3CellIndexThis variable represents the index for the mscLpE3Cell tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.10 |
mscLpE3CellProvTableThis group contains the provisioning attributes for the AtmCell
component. SEQUENCE OF MscLpE3CellProvEntry .1.3.6.1.4.1.562.36.2.1.12.6.5.10 |
mscLpE3CellProvEntryAn entry in the mscLpE3CellProvTable. MscLpE3CellProvEntry .1.3.6.1.4.1.562.36.2.1.12.6.5.10.1 |
mscLpE3CellAlarmActDelayThis attribute defines the time during which a Loss of Cell
Delineation (LCD) defect should be observed before declaring an
LCD alarm (alarm 70115501). The time is specified in milliseconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.1 |
mscLpE3CellScrambleCellPayloadCell scrambling, as defined by ITU-T Recommendation I.432., can
provide a solution to the problem of transmission equipment which
is sensitive to certain bit patterns in the ATM cell payload. This
attribute controls whether or not the cell payload is scrambled.
It defaults to off for DS1 interfaces, and on for all other interfaces.
Note that this setting must be the same at both ends of the link.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.2 |
mscLpE3CellCorrectSingleBitHeaderErrorsThis attribute specifies whether the port corrects single bit errors
detected in the headers of received cells. If single bit errors are
corrected, the affected cells are passed up to the ATM layer
according to normal operation. If single bit errors are not corrected,
these errored cells are discarded by the physical layer. Note that
cells containing multiple bit errors in their headers are always
discarded.
Single bit HEC error correction must remain off for the following
card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm,
2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.3 |
mscLpE3CellOperTableThis group contains the common operational attributes for the
AtmCell component. SEQUENCE OF MscLpE3CellOperEntry .1.3.6.1.4.1.562.36.2.1.12.6.5.11 |
mscLpE3CellOperEntryAn entry in the mscLpE3CellOperTable. MscLpE3CellOperEntry .1.3.6.1.4.1.562.36.2.1.12.6.5.11.1 |
mscLpE3CellLcdAlarmThis attribute displays whether the Loss of Cell Delineation (LCD)
failure alarm state has been entered. This state is entered when LCD
defects have been observed and accumulated for a period of time
specified through the alarmActDelay attribute.
In ATM cell direct mapping mode, an LCD defect occurs when Out
of Cell Delineation (OCD) anomaly persists for x milliseconds, and
disappears when the Out of Cell Delineation (OCD) is absent for x
msec. An OCD anomaly occurs when 7 consecutive incorrect HECs
have been detected. An OCD anomaly terminates when 6
consecutive correct HECs have been detected.
For an AtmCell component located under a DS3 or E3 component
with mapping = PLCP, the LCD defect is directly derived from the
PLCP LOF defect.
If LCD defects are intermittently occurring, the LCD defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle
The component under which is located the AtmCell component goes
into an operational state of disabled until the LCD alarm condition
is cleared. The condition is cleared after the LCD defect has not
been reported for a period of 10 seconds +/- 0.5 seconds.
The lcdAlarm attribute is always set to off when the parent of the
AtmCell component has been locked and left offline. This can also
happen when the Path or Channel component has been suspended
since its parent has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.5.11.1.1 |
mscLpE3CellStatsTableThis group contains the Statistics attribute for the AtmCell
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpE3CellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.6.5.12 |
mscLpE3CellStatsEntryAn entry in the mscLpE3CellStatsTable. MscLpE3CellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.6.5.12.1 |
mscLpE3CellUncorrectableHecErrorsThis attribute indicates the number of uncorrectable ATM cell
header errors that have been detected. Counting of
uncorrectableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detected.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.1 |
mscLpE3CellSevErroredSecThis attribute indicates the total number of ATM Cell Severely
Errored Seconds (SESs) that have been counted.
In direct mapping mode, an ATM Cell SES is declared for second
intervals containing one or more Out of Cell Delineation (OCD)
defects. An OCD defect occurs when seven consecutive incorrect
HECs have been detected. An OCD defect terminates when six
consecutive correct HECs have been detected.
In PLCP mapping mode, an ATM Cell SES is declared for second
intervals containing one or more PLCP LOF defects.
Counting of uncorrectableHeaderErrors (ucErr) and
correctableHeaderErrors (cErr) is inhibited when the OCD defect
is present.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.2 |
mscLpE3CellReceiveCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
received on the link to the nominal link capacity. The utilization is
calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.3 |
mscLpE3CellTransmitCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
transmitted on the link to the nominal link capacity. The utilization
is calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.4 |
mscLpE3CellCorrectableHeaderErrorsThis attribute indicates the number of correctable ATM cell header
errors that have been detected and corrected. Counting of
correctableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detectedro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.5 |
mscLpE3ProvTableThis group contains all of the provisioning data for a E3
component. SEQUENCE OF MscLpE3ProvEntry .1.3.6.1.4.1.562.36.2.1.12.6.10 |
mscLpE3ProvEntryAn entry in the mscLpE3ProvTable. MscLpE3ProvEntry .1.3.6.1.4.1.562.36.2.1.12.6.10.1 |
mscLpE3LineLengthThis attribute defines the line length for equalization calculations
for the E3 line. The line length range is between 0 and 300 metres
(1 metres = 3.28 feet).rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.6.10.1.1 |
mscLpE3ClockingSourceThis attribute defines the type of clocking source used for
synchronizing the E3 transmit clock: local means direct use of the
local clock oscillator at its centre frequency; line means use of a
signal phase-locked to the incoming E3 line rate; module means the
use of a signal phase-locked to the CP reference clock.
Note that the multiport cell-based cards have one common clock
source for each of the three ports. For this reason, the following
rules apply for the value of clockingSource across the board's three
ports:
All three clockingSource values must be 'local' OR
All three clockingSource values must be 'module' OR
One clockingSource value must be 'line' and the other two must be
'otherPort'.
The default value for this attribute will be module if a CP clock is
available, and local otherwise.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.10.1.2 |
mscLpE3ApplicationFramerNameThis attribute defines the link to the software stack. It defines which
application is running on top of the E3 component.rw Link .1.3.6.1.4.1.562.36.2.1.12.6.10.1.3 |
mscLpE3MappingThis attribute indicates if ATM cells will be mapped directly into
the E3 payload, or whether PLCP mapping will be used. The PLCP
component will appear under the E3 component when this attribute
is set to plcp. This attribute will be ignored when set on frame-
based cards.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.10.1.4 |
mscLpE3FramingThis attribute indicates if the framing mode will be in accordance
with the CCITT G.751 or G.832 specification. The G832
component will appear under the E3 component when this attribute
is set to g832. This attribute may only be set on cell-based card
types. Note also that this attribute may only be set to g751 if the
mapping attribute is set to plcp.
The default value of this attribute will be g751 for frame-based
cards, and g832 for cell-based cards.
Note: when E3 framing is changed from g832 to g751, the G832
component must be deleted.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.10.1.5 |
mscLpE3LinkAlarmActivationThresholdThis attribute specifies the time interval between the detection of a
sustained link failure and the activation of an alarm. It is
provisionable for E3 cards.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.6.10.1.6 |
mscLpE3LinkAlarmScanIntervalThis attribute specifies the alarm scan timer polling interval. It
determines how frequently the status of the link is monitored after a
first link error interrupt. It is provisionable for E3 cards.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.6.10.1.7 |
mscLpE3CidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpE3CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.6.11 |
mscLpE3CidDataEntryAn entry in the mscLpE3CidDataTable. MscLpE3CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.6.11.1 |
mscLpE3CustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.6.11.1.1 |
mscLpE3AdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpE3AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.6.12 |
mscLpE3AdminInfoEntryAn entry in the mscLpE3AdminInfoTable. MscLpE3AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.6.12.1 |
mscLpE3VendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.6.12.1.1 |
mscLpE3CommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.6.12.1.2 |
mscLpE3IfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpE3IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.6.13 |
mscLpE3IfEntryEntryAn entry in the mscLpE3IfEntryTable. MscLpE3IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.6.13.1 |
mscLpE3IfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.13.1.1 |
mscLpE3IfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.6.13.1.2 |
mscLpE3OperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpE3OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.14 |
mscLpE3OperStatusEntryAn entry in the mscLpE3OperStatusTable. MscLpE3OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.6.14.1 |
mscLpE3SnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.14.1.1 |
mscLpE3StateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpE3StateEntry .1.3.6.1.4.1.562.36.2.1.12.6.15 |
mscLpE3StateEntryAn entry in the mscLpE3StateTable. MscLpE3StateEntry .1.3.6.1.4.1.562.36.2.1.12.6.15.1 |
mscLpE3AdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.15.1.1 |
mscLpE3OperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.15.1.2 |
mscLpE3UsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.15.1.3 |
mscLpE3AvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.6.15.1.4 |
mscLpE3ProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.6.15.1.5 |
mscLpE3ControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.6.15.1.6 |
mscLpE3AlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.6.15.1.7 |
mscLpE3StandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.15.1.8 |
mscLpE3UnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.15.1.9 |
mscLpE3OperTableThis group contains the common operational data for E3
component. SEQUENCE OF MscLpE3OperEntry .1.3.6.1.4.1.562.36.2.1.12.6.16 |
mscLpE3OperEntryAn entry in the mscLpE3OperTable. MscLpE3OperEntry .1.3.6.1.4.1.562.36.2.1.12.6.16.1 |
mscLpE3LosAlarmThis attribute displays whether a Loss Of Signal (LOS) alarm state
has been entered. An LOS alarm state is entered when LOS defects
has been observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds. An LOS defect is detected at the E3 line interface upon
observing N continuous pulse positions with no pulses of either
positive or negative polarity, where N is between 10 and 255. If the
LOS defects are intermittently occurring, the LOS defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle.
The E3 component goes into an operational state of disabled until
the LOS alarm condition is cleared. The LOS alarm state is cleared
when the LOS defects are absent for a period of 10 seconds +/- 0.5
seconds.
The losAlarm attribute is always set to off when the component has
been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.16.1.1 |
mscLpE3LofAlarmThis attribute displays whether a Loss Of Frame (LOF) alarm state
has been entered. An LOF alarm state is entered when Severely
Errored Frame (SEF) defects have been detected and accumulated
for a period of 2.5 seconds +/- 0.5 seconds. An E3 SEF defect is
reported after detecting Frame Alignment Signal (FAS) errors on 4
consecutive E3 frames received on the incoming line. If the LOF
defects are intermittently occurring, the LOF defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The E3 component goes into an operational state of disabled until
the LOF alarm condition is cleared. The condition is cleared when
E3 framing has been achieved for a period of 10 seconds +/- 0.5
seconds. As long as SEF defects are detected, the node also
transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832)
defect indicator over the outgoing line. The txRai attribute is set to
on when transmitting the far-end SEF/AIS defect indicator on the
outgoing line.
The lofAlarm attribute is always set to off when the component has
been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.16.1.2 |
mscLpE3RxAisAlarmThis attribute displays whether an Alarm Indication Signal (AIS)
alarm when state has been entered. An AIS alarm state is entered
when AIS defects have been observed and accumulated for a period
of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS
defect is the occurrence of the AIS (unframed signal with a density
of zeros below a certain threshold such as defined by ITU
Recommendation G.775). If the AIS defects are intermittently
occurring, the AIS defect accumulator is decremented at a rate of 1/
10 of the incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The E3 component goes into an operational state of disabled until
the AIS alarm condition is cleared (after AIS has been no longer
detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS
is detected on the incoming line, the node also transmits the far-end
SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over
the outgoing line. The txRai attribute is set to on when transmitting
the far-end SEF/AIS defect indicator on the outgoing line.
The rxAisAlarm attribute is always set to off when the component
has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.16.1.3 |
mscLpE3RxRaiAlarmThis attribute displays whether a Remote Alarm Indication (RAI)
alarm state has been entered. A RAI alarm state is entered when far-
end SEF/AIS defects (or Far-End Receive Failure (FERF) defects in
G.832 E3 Framing mode) have been observed and accumulated for
a period of 2.5 seconds +/- 0.5 seconds on the E3 incoming line. If
the RAI defects are intermittently occurring, the RAI defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle.
The E3 component goes into an operational state of disabled until
the RAI alarm condition is cleared. The condition is cleared when
the far-end defect indicator has not been detected for 10 seconds +/-
0.5 seconds. The declaration of a RAI Alarm is usually a signal that
the far end facility is unable to gain synchronization.
The rxRaiAlarm attribute is always set to off when the component
has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.16.1.4 |
mscLpE3TxAisThis attribute displays whether an AIS alarm is being transmitted on
the E3 line. AIS is transmitted on the outgoing line when the E3
component is locked and not used for operational testing.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.16.1.5 |
mscLpE3TxRaiThis attribute displays whether the far-end SEF/AIS defect indicator
is transmitted over the outgoing line when the E3 component has
been unlocked or used in operational testing. When the E3
component is locked and not used in operational testing, this
attribute is always set to off. The far-end SEF/AIS defect indicator is
transmitted over the outgoing line when SEF/AIS defects are
detected on the incoming line. In G.832 E3 Framing mode, the
FERF bit is set to '1' to transmit the SEF/AIS defect indicator.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.6.16.1.6 |
mscLpE3StatsTableThis group contains the common operational data for E3
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpE3StatsEntry .1.3.6.1.4.1.562.36.2.1.12.6.17 |
mscLpE3StatsEntryAn entry in the mscLpE3StatsTable. MscLpE3StatsEntry .1.3.6.1.4.1.562.36.2.1.12.6.17.1 |
mscLpE3RunningTimeThis attribute indicates the total number of seconds since the E3
component has been activated and been in unlocked state or used
for operational testing. All the other error counts that follow as well
as each E3 subcomponent's error counts can be updated when this
count is active.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.1 |
mscLpE3ErrorFreeSecThis attribute indicates the number of seconds that the E3 port has
been in an error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.2 |
mscLpE3LineCodeViolationsThis attribute indicates the total number of Line Code Violations
(LCV) detected. An E3 Line Code Violation is an HDB3 coded
signal error. LCV counting is inhibited for second intervals where a
Line Severely Errored Second (LSES) is counted.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.3 |
mscLpE3LineErroredSecThis attribute indicates the total number of Line Errored Seconds
(LES) that have been counted. A LES is declared for interval
seconds containing one or more Line Code Violations (LCV) or one
or more Loss Of Signal (LOS) defects.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.4 |
mscLpE3LineSevErroredSecThis attribute indicates the total number of Line Severely Errored
Seconds (LSES) that have been counted. A LSES is declared for
second intervals containing more than 34 Line Code Violations
(LCV) or one or more Loss of Signal (LOS) defects.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.5 |
mscLpE3LineLosSecThis attribute indicates the total number of Line LOS Seconds
(LOSS) that have been counted. A LOSS is declared for second
intervals containing one or more Loss of Signal (LOS) defects.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.6 |
mscLpE3LineFailuresThis attribute indicates the total number of times that a line failure
(LOS failure) has been declared.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.7 |
mscLpE3PathCodeViolationsThis attribute indicates the total number of Path Code Violations
(PCV) detected. An E3 PCV is an error in the Frame Alignment
(FA) signal, or, in G.832 Framing Mode, an error in the Frame
Alignment signal or a BIP-8 error. PCV counting is inhibited over
second intervals where a Path Severely Errored Second (PSES) is
counted. Counting of PCVs is also inhibited over second intervals
where a Path Unavailable Second (PUAS) is counted.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.8 |
mscLpE3PathErroredSecThis attribute indicates the total number of Path Errored Seconds
(PES) that have been counted. A PES is declared for second
intervals containing one or more Path Code Violations (PCV) or one
or more Severely Errored Frame (SEF) or Alarm Indication Signal
(AIS) defects. Counting of Path Errored Seconds is inhibited when
a Path Unavailable Second (PUAS) is counted over the monitored
second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.9 |
mscLpE3PathSevErroredSecThis attribute indicates the total number of Path Severely Errored
Seconds (PSES) that have been counted. A PSES is declared for
second intervals containing more than 22 (G.751 E3) or 34 (G.832
E3) Path Code Violations (PCV) or one or more Severely Errored
Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of
PSESs is inhibited when a Path Unavailable Second (PUAS) is
counted over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.10 |
mscLpE3PathSefAisSecThis attribute indicates the total number of Path SEF/AIS Seconds
(PSAS). A PSAS is declared for second intervals containing one or
more Severely Errored Frame (SEF) or Alarm Indication Signal
(AIS) defects. Counting of PSAS is inhibited when Path
Unavailable Seconds (PUAS) is counted over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.11 |
mscLpE3PathUnavailSecThis attribute indicates the total number of one second intervals for
which the E3 path is unavailable. The E3 path becomes unavailable
at the onset of 10 consecutive Path Severely Errored Seconds
(PSES). The 10 PSESs are included in the unavailable time. Once
unavailable, the E3 path becomes available at the onset of 10
contiguous seconds with no PSES. The 10 seconds with no PSES
are excluded from the unavailable time. For second intervals where
PUAS is counted, counting of Path Code Violations (PCV), Path
Errored Seconds (PES), Path Severely Errored Seconds (PSES) and
Path SefAis Seconds (PSAS) is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.12 |
mscLpE3PathFailuresThis attribute indicates the total number of times that a path failure
(LOF/AIS failure) has been declared.
This attribute is a non-negative integer which monotonically
increases until it reaches a maximum value, at which point it wraps
around and starts increasing again from zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.6.17.1.13 |
mscLpDS1 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.7 |
mscLpDS1RowStatusTableThis entry controls the addition and deletion of
mscLpDS1 components. SEQUENCE OF MscLpDS1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.1 |
mscLpDS1RowStatusEntryA single entry in the table represents a single
mscLpDS1 component. MscLpDS1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.1.1 |
mscLpDS1RowStatusThis variable is used as the basis for SNMP naming of
mscLpDS1 components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.1.1.1 |
mscLpDS1ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.1.1.2 |
mscLpDS1StorageTypeThis variable represents the storage type value for the
mscLpDS1 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.1.1.4 |
mscLpDS1IndexThis variable represents the index for the mscLpDS1 tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.7.1.1.10 |
mscLpDS1Chan OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.7.2 |
mscLpDS1ChanRowStatusTableThis entry controls the addition and deletion of
mscLpDS1Chan components. SEQUENCE OF MscLpDS1ChanRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.1 |
mscLpDS1ChanRowStatusEntryA single entry in the table represents a single
mscLpDS1Chan component. MscLpDS1ChanRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.1.1 |
mscLpDS1ChanRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS1Chan components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.1 |
mscLpDS1ChanComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.2 |
mscLpDS1ChanStorageTypeThis variable represents the storage type value for the
mscLpDS1Chan tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.4 |
mscLpDS1ChanIndexThis variable represents the index for the mscLpDS1Chan tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.10 |
mscLpDS1ChanTest OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.7.2.2 |
mscLpDS1ChanTestRowStatusTableThis entry controls the addition and deletion of
mscLpDS1ChanTest components. SEQUENCE OF MscLpDS1ChanTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.2.1 |
mscLpDS1ChanTestRowStatusEntryA single entry in the table represents a single
mscLpDS1ChanTest component. MscLpDS1ChanTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1 |
mscLpDS1ChanTestRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS1ChanTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.1 |
mscLpDS1ChanTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.2 |
mscLpDS1ChanTestStorageTypeThis variable represents the storage type value for the
mscLpDS1ChanTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.4 |
mscLpDS1ChanTestIndexThis variable represents the index for the mscLpDS1ChanTest tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.10 |
mscLpDS1ChanTestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpDS1ChanTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.2.10 |
mscLpDS1ChanTestStateEntryAn entry in the mscLpDS1ChanTestStateTable. MscLpDS1ChanTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1 |
mscLpDS1ChanTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.1 |
mscLpDS1ChanTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.2 |
mscLpDS1ChanTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.3 |
mscLpDS1ChanTestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpDS1ChanTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.2.11 |
mscLpDS1ChanTestSetupEntryAn entry in the mscLpDS1ChanTestSetupTable. MscLpDS1ChanTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1 |
mscLpDS1ChanTestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.1 |
mscLpDS1ChanTestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.2 |
mscLpDS1ChanTestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.3 |
mscLpDS1ChanTestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.4 |
mscLpDS1ChanTestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.5 |
mscLpDS1ChanTestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.6 |
mscLpDS1ChanTestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.7 |
mscLpDS1ChanTestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.8 |
mscLpDS1ChanTestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpDS1ChanTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12 |
mscLpDS1ChanTestResultsEntryAn entry in the mscLpDS1ChanTestResultsTable. MscLpDS1ChanTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1 |
mscLpDS1ChanTestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.1 |
mscLpDS1ChanTestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.2 |
mscLpDS1ChanTestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.3 |
mscLpDS1ChanTestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.4 |
mscLpDS1ChanTestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.5 |
mscLpDS1ChanTestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.6 |
mscLpDS1ChanTestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.7 |
mscLpDS1ChanTestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.8 |
mscLpDS1ChanTestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.9 |
mscLpDS1ChanTestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.10 |
mscLpDS1ChanTestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.11 |
mscLpDS1ChanCell OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.7.2.3 |
mscLpDS1ChanCellRowStatusTableThis entry controls the addition and deletion of
mscLpDS1ChanCell components. SEQUENCE OF MscLpDS1ChanCellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.3.1 |
mscLpDS1ChanCellRowStatusEntryA single entry in the table represents a single
mscLpDS1ChanCell component. MscLpDS1ChanCellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1 |
mscLpDS1ChanCellRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS1ChanCell components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.1 |
mscLpDS1ChanCellComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.2 |
mscLpDS1ChanCellStorageTypeThis variable represents the storage type value for the
mscLpDS1ChanCell tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.4 |
mscLpDS1ChanCellIndexThis variable represents the index for the mscLpDS1ChanCell tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.10 |
mscLpDS1ChanCellProvTableThis group contains the provisioning attributes for the AtmCell
component. SEQUENCE OF MscLpDS1ChanCellProvEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.3.10 |
mscLpDS1ChanCellProvEntryAn entry in the mscLpDS1ChanCellProvTable. MscLpDS1ChanCellProvEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1 |
mscLpDS1ChanCellAlarmActDelayThis attribute defines the time during which a Loss of Cell
Delineation (LCD) defect should be observed before declaring an
LCD alarm (alarm 70115501). The time is specified in milliseconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.1 |
mscLpDS1ChanCellScrambleCellPayloadCell scrambling, as defined by ITU-T Recommendation I.432., can
provide a solution to the problem of transmission equipment which
is sensitive to certain bit patterns in the ATM cell payload. This
attribute controls whether or not the cell payload is scrambled.
It defaults to off for DS1 interfaces, and on for all other interfaces.
Note that this setting must be the same at both ends of the link.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.2 |
mscLpDS1ChanCellCorrectSingleBitHeaderErrorsThis attribute specifies whether the port corrects single bit errors
detected in the headers of received cells. If single bit errors are
corrected, the affected cells are passed up to the ATM layer
according to normal operation. If single bit errors are not corrected,
these errored cells are discarded by the physical layer. Note that
cells containing multiple bit errors in their headers are always
discarded.
Single bit HEC error correction must remain off for the following
card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm,
2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.3 |
mscLpDS1ChanCellOperTableThis group contains the common operational attributes for the
AtmCell component. SEQUENCE OF MscLpDS1ChanCellOperEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.3.11 |
mscLpDS1ChanCellOperEntryAn entry in the mscLpDS1ChanCellOperTable. MscLpDS1ChanCellOperEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1 |
mscLpDS1ChanCellLcdAlarmThis attribute displays whether the Loss of Cell Delineation (LCD)
failure alarm state has been entered. This state is entered when LCD
defects have been observed and accumulated for a period of time
specified through the alarmActDelay attribute.
In ATM cell direct mapping mode, an LCD defect occurs when Out
of Cell Delineation (OCD) anomaly persists for x milliseconds, and
disappears when the Out of Cell Delineation (OCD) is absent for x
msec. An OCD anomaly occurs when 7 consecutive incorrect HECs
have been detected. An OCD anomaly terminates when 6
consecutive correct HECs have been detected.
For an AtmCell component located under a DS3 or E3 component
with mapping = PLCP, the LCD defect is directly derived from the
PLCP LOF defect.
If LCD defects are intermittently occurring, the LCD defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle
The component under which is located the AtmCell component goes
into an operational state of disabled until the LCD alarm condition
is cleared. The condition is cleared after the LCD defect has not
been reported for a period of 10 seconds +/- 0.5 seconds.
The lcdAlarm attribute is always set to off when the parent of the
AtmCell component has been locked and left offline. This can also
happen when the Path or Channel component has been suspended
since its parent has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1.1 |
mscLpDS1ChanCellStatsTableThis group contains the Statistics attribute for the AtmCell
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpDS1ChanCellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.3.12 |
mscLpDS1ChanCellStatsEntryAn entry in the mscLpDS1ChanCellStatsTable. MscLpDS1ChanCellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1 |
mscLpDS1ChanCellUncorrectableHecErrorsThis attribute indicates the number of uncorrectable ATM cell
header errors that have been detected. Counting of
uncorrectableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detected.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.1 |
mscLpDS1ChanCellSevErroredSecThis attribute indicates the total number of ATM Cell Severely
Errored Seconds (SESs) that have been counted.
In direct mapping mode, an ATM Cell SES is declared for second
intervals containing one or more Out of Cell Delineation (OCD)
defects. An OCD defect occurs when seven consecutive incorrect
HECs have been detected. An OCD defect terminates when six
consecutive correct HECs have been detected.
In PLCP mapping mode, an ATM Cell SES is declared for second
intervals containing one or more PLCP LOF defects.
Counting of uncorrectableHeaderErrors (ucErr) and
correctableHeaderErrors (cErr) is inhibited when the OCD defect
is present.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.2 |
mscLpDS1ChanCellReceiveCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
received on the link to the nominal link capacity. The utilization is
calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.3 |
mscLpDS1ChanCellTransmitCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
transmitted on the link to the nominal link capacity. The utilization
is calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.4 |
mscLpDS1ChanCellCorrectableHeaderErrorsThis attribute indicates the number of correctable ATM cell header
errors that have been detected and corrected. Counting of
correctableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detectedro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.5 |
mscLpDS1ChanTc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.7.2.4 |
mscLpDS1ChanTcRowStatusTableThis entry controls the addition and deletion of
mscLpDS1ChanTc components. SEQUENCE OF MscLpDS1ChanTcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.4.1 |
mscLpDS1ChanTcRowStatusEntryA single entry in the table represents a single
mscLpDS1ChanTc component. MscLpDS1ChanTcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1 |
mscLpDS1ChanTcRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS1ChanTc components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.1 |
mscLpDS1ChanTcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.2 |
mscLpDS1ChanTcStorageTypeThis variable represents the storage type value for the
mscLpDS1ChanTc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.4 |
mscLpDS1ChanTcIndexThis variable represents the index for the mscLpDS1ChanTc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.10 |
mscLpDS1ChanTcProvTableThis group contains all specific provisioning data for a Tc
component. SEQUENCE OF MscLpDS1ChanTcProvEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.4.10 |
mscLpDS1ChanTcProvEntryAn entry in the mscLpDS1ChanTcProvTable. MscLpDS1ChanTcProvEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1 |
mscLpDS1ChanTcReplacementDataThis attribute specifies the trunk conditioning data byte to be
substituted into the timeslots defined by the Chan component under
fault conditions.
replacementData can be set to any two digit hexadecimal number.
The following are recommended values:
DS1 MUX Out Of Service Code = 0x1A
E1 MUX Out Of Service Code = 0xFFrw Hex .1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.1 |
mscLpDS1ChanTcSignalOneDurationThis attribute specifies the time duration in seconds for which
signalOne is substituted into the appropriate signaling bits, when a
lineType that uses CAS has been defined. When signalOneDuration
has expired signalTwo is substituted into the appropriate signaling
bits.
If signalOneDuration is set to zero then only signalTwo is
substituted into the appropriate signaling bits during error
conditions.
signalOneDuration can be set to any integer value from 0 to 60
seconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.2 |
mscLpDS1ChanTcOpTableThis group contains all specific operational data for a Tc
component. SEQUENCE OF MscLpDS1ChanTcOpEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.4.11 |
mscLpDS1ChanTcOpEntryAn entry in the mscLpDS1ChanTcOpTable. MscLpDS1ChanTcOpEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1 |
mscLpDS1ChanTcIngressConditioningThis attribute indicates the status of locally generated trunk
conditioning towards the ATM network.
When trunk conditioning is being locally generated towards the
ATM network, ingressConditioning is set to on.
When trunk conditioning is not being locally generated towards the
ATM network, ingressConditioning is set to off.
Trunk conditioning is transmitted towards the ATM network under
the following conditions:
lossOfSignal (LOS)
lossOfFrame (LOF)
remoteAlarmIndication (RAI)
alarmIndicationSignal (AIS)
bufferUnderflow (BU)
and in addition for E1:
lossOfMultiframe (LOMF)
receiveMultiframeRemoteAlarmIndication (RMRAI)ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.1 |
mscLpDS1ChanTcEgressConditioningThis attribute indicates the status of locally generated trunk
conditioning towards the PDH line.
When trunk conditioning is being locally generated towards the
PDH line, egressConditioning is set to on.
When trunk conditioning is not being locally generated towards the
PDH line, egressConditioning is set to off.
Trunk conditioning is transmitted towards the PDH line under the
following conditions:
bufferUnderflow (BU)
AAL1 protocol errors.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.2 |
mscLpDS1ChanTcSigOneTableThis attribute specifies the value to be substituted into the ABCD
signaling bits for the timeslots defined by the Chan component
under fault conditions. The value will be substituted for the duration
provisioned in signalOneDuration when a lineType that uses CAS
has been defined.
For a lineType of d4Cas (Super Frame), signaling bits C and D are
required to equal bits A and B respectively. SEQUENCE OF MscLpDS1ChanTcSigOneEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.4.398 |
mscLpDS1ChanTcSigOneEntryAn entry in the mscLpDS1ChanTcSigOneTable. MscLpDS1ChanTcSigOneEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1 |
mscLpDS1ChanTcSigOneIndexThis variable represents the mscLpDS1ChanTcSigOneTable
specific index for the mscLpDS1ChanTcSigOneTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.1 |
mscLpDS1ChanTcSigOneValueThis variable represents an individual value for the
mscLpDS1ChanTcSigOneTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.2 |
mscLpDS1ChanTcSigTwoTableThis attribute specifies the value to be substituted into the ABCD
signaling bits for the timeslots defined by the Chan component
under fault conditions. The value will be substituted after the
duration provisioned in signalOneDuration has expired and when a
lineType that uses CAS has been defined.
For a lineType of d4Cas (Super Frame), signaling bits C and D are
required to equal bits A and B respectively. SEQUENCE OF MscLpDS1ChanTcSigTwoEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.4.399 |
mscLpDS1ChanTcSigTwoEntryAn entry in the mscLpDS1ChanTcSigTwoTable. MscLpDS1ChanTcSigTwoEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1 |
mscLpDS1ChanTcSigTwoIndexThis variable represents the mscLpDS1ChanTcSigTwoTable
specific index for the mscLpDS1ChanTcSigTwoTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.1 |
mscLpDS1ChanTcSigTwoValueThis variable represents an individual value for the
mscLpDS1ChanTcSigTwoTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.2 |
mscLpDS1ChanProvTableThis group contains all of the provisional data for a Channel
component. SEQUENCE OF MscLpDS1ChanProvEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.10 |
mscLpDS1ChanProvEntryAn entry in the mscLpDS1ChanProvTable. MscLpDS1ChanProvEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.10.1 |
mscLpDS1ChanTimeslotsThis attribute contains the list of timeslots that are used by the
Channel component. Valid numbers are 1-24 for a Channel used by
a DS1 component, and 1-31 for a Channel used by an E1
component.
Description of bits:
notused0(0)
n1(1)
n2(2)
n3(3)
n4(4)
n5(5)
n6(6)
n7(7)
n8(8)
n9(9)
n10(10)
n11(11)
n12(12)
n13(13)
n14(14)
n15(15)
n16(16)
n17(17)
n18(18)
n19(19)
n20(20)
n21(21)
n22(22)
n23(23)
n24(24)
n25(25)
n26(26)
n27(27)
n28(28)
n29(29)
n30(30)
n31(31)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.1 |
mscLpDS1ChanTimeslotDataRateThis attribute selects the data rate of the timeslots in a channel of a
DS1 component. For E1, the data rate of the timeslots will always
be 64kbit/s regardless of this attribute.
When doNotOverride is selected for a channel on a DS1, the data
rate of the channel's timeslots are dependant on the zeroCoding
selection of the DS1 component. If the zeroCoding is B8ZS (where
supported on the FP) or none, the timeslot's data rate will be 64kbit/
s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot
will be 56kbit/s.
When 56k is selected for a channel on a DS1, the least significant
bit of each timeslot of this Channel will always be set to 1 and not
used for data. The data rate for the timeslots of this channel is
therefore restricted to 56kbit/s.
One application of this attribute is to allow a DS1 line to support
mixing channels that originate from lines that use different
zeroCoding schemes.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.2 |
mscLpDS1ChanApplicationFramerNameThis attribute defines the link to the software stack. It defines which
application is running on top of this hardware component.rw Link .1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.3 |
mscLpDS1ChanCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpDS1ChanCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.11 |
mscLpDS1ChanCidDataEntryAn entry in the mscLpDS1ChanCidDataTable. MscLpDS1ChanCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.11.1 |
mscLpDS1ChanCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.7.2.11.1.1 |
mscLpDS1ChanIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpDS1ChanIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.12 |
mscLpDS1ChanIfEntryEntryAn entry in the mscLpDS1ChanIfEntryTable. MscLpDS1ChanIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.12.1 |
mscLpDS1ChanIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.1 |
mscLpDS1ChanIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.2 |
mscLpDS1ChanOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpDS1ChanOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.13 |
mscLpDS1ChanOperStatusEntryAn entry in the mscLpDS1ChanOperStatusTable. MscLpDS1ChanOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.13.1 |
mscLpDS1ChanSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.13.1.1 |
mscLpDS1ChanStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpDS1ChanStateEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.14 |
mscLpDS1ChanStateEntryAn entry in the mscLpDS1ChanStateTable. MscLpDS1ChanStateEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.14.1 |
mscLpDS1ChanAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.1 |
mscLpDS1ChanOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.2 |
mscLpDS1ChanUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.3 |
mscLpDS1ChanAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.4 |
mscLpDS1ChanProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.5 |
mscLpDS1ChanControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.6 |
mscLpDS1ChanAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.7 |
mscLpDS1ChanStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.8 |
mscLpDS1ChanUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.9 |
mscLpDS1ChanOperTableThis group contains all of the operational data for a Channel
component. SEQUENCE OF MscLpDS1ChanOperEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.15 |
mscLpDS1ChanOperEntryAn entry in the mscLpDS1ChanOperTable. MscLpDS1ChanOperEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.15.1 |
mscLpDS1ChanActualChannelSpeedThis attribute displays the measured link speed of the Channel
component.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.7.2.15.1.1 |
mscLpDS1ChanAdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpDS1ChanAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.16 |
mscLpDS1ChanAdminInfoEntryAn entry in the mscLpDS1ChanAdminInfoTable. MscLpDS1ChanAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.7.2.16.1 |
mscLpDS1ChanVendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.1 |
mscLpDS1ChanCommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.2 |
mscLpDS1Test OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.7.3 |
mscLpDS1TestRowStatusTableThis entry controls the addition and deletion of
mscLpDS1Test components. SEQUENCE OF MscLpDS1TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.3.1 |
mscLpDS1TestRowStatusEntryA single entry in the table represents a single
mscLpDS1Test component. MscLpDS1TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.3.1.1 |
mscLpDS1TestRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS1Test components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.1 |
mscLpDS1TestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.2 |
mscLpDS1TestStorageTypeThis variable represents the storage type value for the
mscLpDS1Test tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.4 |
mscLpDS1TestIndexThis variable represents the index for the mscLpDS1Test tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.10 |
mscLpDS1TestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpDS1TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.7.3.10 |
mscLpDS1TestStateEntryAn entry in the mscLpDS1TestStateTable. MscLpDS1TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.7.3.10.1 |
mscLpDS1TestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.1 |
mscLpDS1TestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.2 |
mscLpDS1TestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.3 |
mscLpDS1TestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpDS1TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.7.3.11 |
mscLpDS1TestSetupEntryAn entry in the mscLpDS1TestSetupTable. MscLpDS1TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.7.3.11.1 |
mscLpDS1TestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.1 |
mscLpDS1TestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.2 |
mscLpDS1TestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.3 |
mscLpDS1TestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.4 |
mscLpDS1TestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.5 |
mscLpDS1TestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.6 |
mscLpDS1TestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.7 |
mscLpDS1TestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.8 |
mscLpDS1TestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpDS1TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.7.3.12 |
mscLpDS1TestResultsEntryAn entry in the mscLpDS1TestResultsTable. MscLpDS1TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1 |
mscLpDS1TestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.1 |
mscLpDS1TestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.2 |
mscLpDS1TestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.3 |
mscLpDS1TestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.4 |
mscLpDS1TestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.5 |
mscLpDS1TestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.6 |
mscLpDS1TestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.7 |
mscLpDS1TestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.8 |
mscLpDS1TestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.9 |
mscLpDS1TestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.10 |
mscLpDS1TestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.11 |
mscLpDS1Dsp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.7.4 |
mscLpDS1DspRowStatusTableThis entry controls the addition and deletion of
mscLpDS1Dsp components. SEQUENCE OF MscLpDS1DspRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.4.1 |
mscLpDS1DspRowStatusEntryA single entry in the table represents a single
mscLpDS1Dsp component. MscLpDS1DspRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.4.1.1 |
mscLpDS1DspRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS1Dsp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.1 |
mscLpDS1DspComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.2 |
mscLpDS1DspStorageTypeThis variable represents the storage type value for the
mscLpDS1Dsp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.4 |
mscLpDS1DspIndexThis variable represents the index for the mscLpDS1Dsp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.10 |
mscLpDS1Audio OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.7.5 |
mscLpDS1AudioRowStatusTableThis entry controls the addition and deletion of
mscLpDS1Audio components. SEQUENCE OF MscLpDS1AudioRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.5.1 |
mscLpDS1AudioRowStatusEntryA single entry in the table represents a single
mscLpDS1Audio component. MscLpDS1AudioRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.5.1.1 |
mscLpDS1AudioRowStatusThis variable is used as the basis for SNMP naming of
mscLpDS1Audio components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.1 |
mscLpDS1AudioComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.2 |
mscLpDS1AudioStorageTypeThis variable represents the storage type value for the
mscLpDS1Audio tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.4 |
mscLpDS1AudioIndexThis variable represents the index for the mscLpDS1Audio tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.10 |
mscLpDS1ProvTableThis group contains all of the provisioning data for a DS1
component. SEQUENCE OF MscLpDS1ProvEntry .1.3.6.1.4.1.562.36.2.1.12.7.10 |
mscLpDS1ProvEntryAn entry in the mscLpDS1ProvTable. MscLpDS1ProvEntry .1.3.6.1.4.1.562.36.2.1.12.7.10.1 |
mscLpDS1LineTypeThis attribute defines the framing of the DS1 line.
d4 defines a framing pattern of 12 frames per multiframe.
esf defines a framing pattern of 24 frames per multiframe.
d4Cas defines a framing pattern of 12 frames per multiframe with
channel associated signalling.
esfCas defines a framing pattern of 24 frames per multiframe with
channel associated signalling.
unframed defines an unknown framing pattern for clear channels.
For cell-based cards only the default option esf is permitted.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.10.1.1 |
mscLpDS1ZeroCodingThis attribute defines the zero encoding on the DS1 line.
bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's
density. This reduces the available bandwidth of the channel by 1/8.
b8zs substitutes a pattern of bipolar violations if more than 7 zeros
in a row are to be transported.
ami specifies Alternate Mark Inversion, in which successive marks
(ones) alternate between positive and negative polarity voltage
signals, and spaces (zeros) are sent as a zero amplitude signal.
When zeroCoding is set to ami and lineType is set to d4, it is
recommended that raiAlarmType be set to SBit in order to avoid
possible mimic RAI alarm.
For cell-based cards only the default value b8zs is permitted.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.10.1.2 |
mscLpDS1ClockingSourceThis attribute defines the source of the transmit clock for the DS1
line.
When local is selected, the crystal on the port generates the
clocking for the line.
When line is selected, the port synchronizes to the clock from the
facility.
When module is selected, the ports clock synchronizes to the clock
provided by the oscillator on the active CP.
When otherPort is selected, the port synchronizes to the port with a
clocking source of line.
When srtsMode is selected, the port transmit frequency depends on
the SRTS (Synchronous Residual Time-Stamp) received over the
ATM network. SRTS information is also generated sent over the
ATM network.
When adaptiveMode is selected, the port transmit frequency
continually adapts to match the egress data received from the ATM
network.
A port with srtsMode or adaptiveMode must have a single Chan
which may be linked only to an Aal1Ces.service with serviceType
unstructured
If the NetworkSynchronization component is present, the default
value of this attribute is module, otherwise it defaults to line, except
for the 3pDS1Atm card, which it defaults to local.
On a 3pDS1Atm card all ports must have the same value, and be
either local or module.
otherPort is valid only on AAL1 cards. srtsMode is valid only on
AAL1 and Multi-Service Access cards. adaptiveMode is valid only
on Multi-Service Access cards.
On 4DS1Aal1 cards either:
all four ports' clockingSource values must be local OR
all four ports' clockingSource values must be module OR
one port's clockingSource value must be line and the other three
must be otherPort. A port can only have srtsMode selected if the
other ports are module or srtsMode.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.10.1.3 |
mscLpDS1RaiAlarmTypeThis attribute defines the method of sending a RAI (Remote Alarm
Indication) alarm on a DS1 line.
When SBit is selected, RAI alarm is sent by setting the S bit in
frame 12.
When Bit2 is selected, RAI alarm is sent by setting bit 2 in all
timeslots to 0.
When fdl is selected, RAI alarm is sent by a repeating pattern of 00
hex and FF hex on the FDL link.
Note that for lineType of d4, only the SBit and the Bit2 methods are
applicable. Whereas for lineType of esf, only the Bit2 and the fdl
methods are applicable.
SBit method is recommended if lineType is set to d4 and
zeroCoding is set to ami. This will help to avoid potential mimic
RAI alarm when 1's density is too low in the data transmitted.
For cell-based cards only the default value fdl is permitted.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.10.1.4 |
mscLpDS1LineLengthThis attribute defines the line length (in feet) for equalization
calculations for the DS1 line. The value ranges between 0-655. For
8pDS1Atm cards the actual value used for equalization is rounded
up to the nearest 110 feet; for all other card types the actual value
used is rounded to the nearest 50 feet.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.7.10.1.5 |
mscLpDS1CidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpDS1CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.7.11 |
mscLpDS1CidDataEntryAn entry in the mscLpDS1CidDataTable. MscLpDS1CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.7.11.1 |
mscLpDS1CustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.7.11.1.1 |
mscLpDS1AdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpDS1AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.7.12 |
mscLpDS1AdminInfoEntryAn entry in the mscLpDS1AdminInfoTable. MscLpDS1AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.7.12.1 |
mscLpDS1VendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.7.12.1.1 |
mscLpDS1CommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.7.12.1.2 |
mscLpDS1IfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpDS1IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.7.13 |
mscLpDS1IfEntryEntryAn entry in the mscLpDS1IfEntryTable. MscLpDS1IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.7.13.1 |
mscLpDS1IfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.13.1.1 |
mscLpDS1IfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.7.13.1.2 |
mscLpDS1OperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpDS1OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.14 |
mscLpDS1OperStatusEntryAn entry in the mscLpDS1OperStatusTable. MscLpDS1OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.7.14.1 |
mscLpDS1SnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.14.1.1 |
mscLpDS1StateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpDS1StateEntry .1.3.6.1.4.1.562.36.2.1.12.7.15 |
mscLpDS1StateEntryAn entry in the mscLpDS1StateTable. MscLpDS1StateEntry .1.3.6.1.4.1.562.36.2.1.12.7.15.1 |
mscLpDS1AdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.15.1.1 |
mscLpDS1OperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.15.1.2 |
mscLpDS1UsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.15.1.3 |
mscLpDS1AvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.7.15.1.4 |
mscLpDS1ProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.7.15.1.5 |
mscLpDS1ControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.7.15.1.6 |
mscLpDS1AlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.7.15.1.7 |
mscLpDS1StandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.15.1.8 |
mscLpDS1UnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.15.1.9 |
mscLpDS1OperTableThis group contains the common operational data for a component
in a digital hierarchy interface. SEQUENCE OF MscLpDS1OperEntry .1.3.6.1.4.1.562.36.2.1.12.7.16 |
mscLpDS1OperEntryAn entry in the mscLpDS1OperTable. MscLpDS1OperEntry .1.3.6.1.4.1.562.36.2.1.12.7.16.1 |
mscLpDS1LosAlarmThis attribute displays whether a LOS (Loss of Signal) alarm state
has been entered. A LOS alarm is declared after LOS defects have
been observed and accumulated for a period of 2 seconds +/- 0.5
seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm
cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon
observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm,
8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse
positions with no pulses of either positive or negative polarity). If
the LOS defects are intermittently occurring, the LOS defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle.
The port goes into an operational state of disabled until the LOS
alarm state is cleared. Also, an RAI alarm is transmitted to the far
end for the duration of the LOS alarm state.
The LOS alarm state is cleared when LOS defects are absent for 10
seconds +/- 0.5 seconds.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.16.1.1 |
mscLpDS1RxAisAlarmThis attribute displays whether an AIS (Alarm Indication Signal)
alarm state has been entered. The AIS Alarm state is entered when
AIS defects have been observed and accumulated for 2.5 seconds +/
- 0.5 seconds. An AIS defect is detected after having received less
than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both
an Out Of Frame condition exists and a 1's density of at least 99.9%
is present for a time T, where 3 ms T 75 ms; for 8pE1Atm
cards: when both an Out Of Frame condition exists and fewer than
three 0's have been received in 512 bit periods). If the AIS defects
are intermittently occurring, the AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The port goes into an operational state of disabled for the duration
of an AIS alarm state.
The AIS alarm state is cleared when AIS defects are absent for 10
seconds +/- 0.5 seconds.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.16.1.2 |
mscLpDS1LofAlarmThis attribute displays whether a LOF (Loss of Frame) alarm state
has been entered. The LOF alarm state is entered when LOF defects
(for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive
frame alignment patterns in error) have been detected for 3 seconds
+/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and
8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects
are intermittently occurring, the LOF defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The port goes into an operational state of disabled until the LOF
alarm state is cleared. Also, an RAI alarm is transmitted to the far
end for the duration of the LOF alarm state
The condition is cleared when framing has been achieved for 10
seconds +/- 0.5 seconds.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.16.1.3 |
mscLpDS1RxRaiAlarmThis attribute displays whether an RAI (Remote Alarm Indication)
alarm state has been entered. An RAI alarm state is entered when
the RAI defect indicator has been observed and accumulated for 3.5
seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards:
alarm is declared immediately upon observing the defect is present,
with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm
state is entered when the RAI defect indicator has been observed
and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects
are intermittently occurring, the RAI defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The RAI alarm state is cleared when the RAI defect indicator has
been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and
8pDS1Atm cards: alarm is cleared immediately upon observing the
defect is absent, with no integration time).
The RAI alarm is usually an indication that the far end facility is
unable to gain synchronization.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.16.1.4 |
mscLpDS1TxAisAlarmThis attribute displays whether an AIS (Alarm Indication Signal)
alarm is being transmitted on the line. An AIS alarm is transmitted
when the port is in a locked state.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.16.1.5 |
mscLpDS1TxRaiAlarmThis attribute displays whether a RAI signal is being sent on the
outgoing line. The RAI signal is transmitted when the port detects a
LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and
8pE1Atm cards: RAI is transmitted when the port detects a LOS,
LOF, or AIS condition).ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.7.16.1.6 |
mscLpDS1StatsTableThis group contains the common statistical data for a component in
a digital hierarchy interface. SEQUENCE OF MscLpDS1StatsEntry .1.3.6.1.4.1.562.36.2.1.12.7.17 |
mscLpDS1StatsEntryAn entry in the mscLpDS1StatsTable. MscLpDS1StatsEntry .1.3.6.1.4.1.562.36.2.1.12.7.17.1 |
mscLpDS1RunningTimeThe number of seconds since the port component was activated.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.1 |
mscLpDS1ErrorFreeSecThe number of seconds that the port has been in an error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.2 |
mscLpDS1ErroredSecAn errored second is declared when a second with one or more
Code Violation Error events, or one or more Out Of Frame events
occurs. A code violation error may be a CRC error or a BPV error.
An Out Of Frame event occurs when 2 out of 5 framing bits are in
error.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.3 |
mscLpDS1SevErroredSecA severely errored second occurs when a second with 320 or more
Code Violation Error events or one or more Out Of Frame events
occurs.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.4 |
mscLpDS1SevErroredFrmSecA severely errored framing second occurs when a second with one
or more Out Of Frame events occurs.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.5 |
mscLpDS1UnavailSecThe total number of seconds that the interface is in an unavailable
signal state. An unavailable signal state occurs at the onset of 10
consecutive Severely Errored Seconds. The state is cleared at the
onset of 10 seconds with no Severely Errored Seconds.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.6 |
mscLpDS1BpvErrorsThe current count of Bipolar Violations. A bipolar violation is an
error in the alternate mark inversion pattern (AMI) on the line.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.7 |
mscLpDS1CrcErrorsIf the interface is a DS1 line, it is the current count of CRC-6 errors.
These will only be counted when the lineType is ESF.
If the interface is an E1 line, it is the total number of CRC-4 errors.
These will only be counted when crc4Mode is on.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.8 |
mscLpDS1FrmErrorsThe current count of frame errors. A frame error is an error in the
framing bitsro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.9 |
mscLpDS1LosStateChangesThe total number of times that the line lost signal.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.10 |
mscLpDS1SlipErrorsThe total number of times that the line experienced a controlled
frame slip. This attribute is incremented for ports on the voice cards
(for example the 1pDS1V and the 1pE1V function processors) only.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.7.17.1.11 |
mscLpE1 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.8 |
mscLpE1RowStatusTableThis entry controls the addition and deletion of
mscLpE1 components. SEQUENCE OF MscLpE1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.1 |
mscLpE1RowStatusEntryA single entry in the table represents a single
mscLpE1 component. MscLpE1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.1.1 |
mscLpE1RowStatusThis variable is used as the basis for SNMP naming of
mscLpE1 components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.1.1.1 |
mscLpE1ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.1.1.2 |
mscLpE1StorageTypeThis variable represents the storage type value for the
mscLpE1 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.1.1.4 |
mscLpE1IndexThis variable represents the index for the mscLpE1 tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.8.1.1.10 |
mscLpE1Chan OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.8.2 |
mscLpE1ChanRowStatusTableThis entry controls the addition and deletion of
mscLpE1Chan components. SEQUENCE OF MscLpE1ChanRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.1 |
mscLpE1ChanRowStatusEntryA single entry in the table represents a single
mscLpE1Chan component. MscLpE1ChanRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.1.1 |
mscLpE1ChanRowStatusThis variable is used as the basis for SNMP naming of
mscLpE1Chan components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.1 |
mscLpE1ChanComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.2 |
mscLpE1ChanStorageTypeThis variable represents the storage type value for the
mscLpE1Chan tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.4 |
mscLpE1ChanIndexThis variable represents the index for the mscLpE1Chan tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.10 |
mscLpE1ChanTest OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.8.2.2 |
mscLpE1ChanTestRowStatusTableThis entry controls the addition and deletion of
mscLpE1ChanTest components. SEQUENCE OF MscLpE1ChanTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.2.1 |
mscLpE1ChanTestRowStatusEntryA single entry in the table represents a single
mscLpE1ChanTest component. MscLpE1ChanTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1 |
mscLpE1ChanTestRowStatusThis variable is used as the basis for SNMP naming of
mscLpE1ChanTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.1 |
mscLpE1ChanTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.2 |
mscLpE1ChanTestStorageTypeThis variable represents the storage type value for the
mscLpE1ChanTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.4 |
mscLpE1ChanTestIndexThis variable represents the index for the mscLpE1ChanTest tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.10 |
mscLpE1ChanTestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpE1ChanTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.2.10 |
mscLpE1ChanTestStateEntryAn entry in the mscLpE1ChanTestStateTable. MscLpE1ChanTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1 |
mscLpE1ChanTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.1 |
mscLpE1ChanTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.2 |
mscLpE1ChanTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.3 |
mscLpE1ChanTestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpE1ChanTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.2.11 |
mscLpE1ChanTestSetupEntryAn entry in the mscLpE1ChanTestSetupTable. MscLpE1ChanTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1 |
mscLpE1ChanTestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.1 |
mscLpE1ChanTestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.2 |
mscLpE1ChanTestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.3 |
mscLpE1ChanTestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.4 |
mscLpE1ChanTestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.5 |
mscLpE1ChanTestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.6 |
mscLpE1ChanTestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.7 |
mscLpE1ChanTestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.8 |
mscLpE1ChanTestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpE1ChanTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12 |
mscLpE1ChanTestResultsEntryAn entry in the mscLpE1ChanTestResultsTable. MscLpE1ChanTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1 |
mscLpE1ChanTestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.1 |
mscLpE1ChanTestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.2 |
mscLpE1ChanTestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.3 |
mscLpE1ChanTestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.4 |
mscLpE1ChanTestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.5 |
mscLpE1ChanTestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.6 |
mscLpE1ChanTestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.7 |
mscLpE1ChanTestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.8 |
mscLpE1ChanTestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.9 |
mscLpE1ChanTestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.10 |
mscLpE1ChanTestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.11 |
mscLpE1ChanCell OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.8.2.3 |
mscLpE1ChanCellRowStatusTableThis entry controls the addition and deletion of
mscLpE1ChanCell components. SEQUENCE OF MscLpE1ChanCellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.3.1 |
mscLpE1ChanCellRowStatusEntryA single entry in the table represents a single
mscLpE1ChanCell component. MscLpE1ChanCellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1 |
mscLpE1ChanCellRowStatusThis variable is used as the basis for SNMP naming of
mscLpE1ChanCell components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.1 |
mscLpE1ChanCellComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.2 |
mscLpE1ChanCellStorageTypeThis variable represents the storage type value for the
mscLpE1ChanCell tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.4 |
mscLpE1ChanCellIndexThis variable represents the index for the mscLpE1ChanCell tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.10 |
mscLpE1ChanCellProvTableThis group contains the provisioning attributes for the AtmCell
component. SEQUENCE OF MscLpE1ChanCellProvEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.3.10 |
mscLpE1ChanCellProvEntryAn entry in the mscLpE1ChanCellProvTable. MscLpE1ChanCellProvEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1 |
mscLpE1ChanCellAlarmActDelayThis attribute defines the time during which a Loss of Cell
Delineation (LCD) defect should be observed before declaring an
LCD alarm (alarm 70115501). The time is specified in milliseconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.1 |
mscLpE1ChanCellScrambleCellPayloadCell scrambling, as defined by ITU-T Recommendation I.432., can
provide a solution to the problem of transmission equipment which
is sensitive to certain bit patterns in the ATM cell payload. This
attribute controls whether or not the cell payload is scrambled.
It defaults to off for DS1 interfaces, and on for all other interfaces.
Note that this setting must be the same at both ends of the link.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.2 |
mscLpE1ChanCellCorrectSingleBitHeaderErrorsThis attribute specifies whether the port corrects single bit errors
detected in the headers of received cells. If single bit errors are
corrected, the affected cells are passed up to the ATM layer
according to normal operation. If single bit errors are not corrected,
these errored cells are discarded by the physical layer. Note that
cells containing multiple bit errors in their headers are always
discarded.
Single bit HEC error correction must remain off for the following
card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm,
2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.3 |
mscLpE1ChanCellOperTableThis group contains the common operational attributes for the
AtmCell component. SEQUENCE OF MscLpE1ChanCellOperEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.3.11 |
mscLpE1ChanCellOperEntryAn entry in the mscLpE1ChanCellOperTable. MscLpE1ChanCellOperEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1 |
mscLpE1ChanCellLcdAlarmThis attribute displays whether the Loss of Cell Delineation (LCD)
failure alarm state has been entered. This state is entered when LCD
defects have been observed and accumulated for a period of time
specified through the alarmActDelay attribute.
In ATM cell direct mapping mode, an LCD defect occurs when Out
of Cell Delineation (OCD) anomaly persists for x milliseconds, and
disappears when the Out of Cell Delineation (OCD) is absent for x
msec. An OCD anomaly occurs when 7 consecutive incorrect HECs
have been detected. An OCD anomaly terminates when 6
consecutive correct HECs have been detected.
For an AtmCell component located under a DS3 or E3 component
with mapping = PLCP, the LCD defect is directly derived from the
PLCP LOF defect.
If LCD defects are intermittently occurring, the LCD defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle
The component under which is located the AtmCell component goes
into an operational state of disabled until the LCD alarm condition
is cleared. The condition is cleared after the LCD defect has not
been reported for a period of 10 seconds +/- 0.5 seconds.
The lcdAlarm attribute is always set to off when the parent of the
AtmCell component has been locked and left offline. This can also
happen when the Path or Channel component has been suspended
since its parent has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1.1 |
mscLpE1ChanCellStatsTableThis group contains the Statistics attribute for the AtmCell
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpE1ChanCellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.3.12 |
mscLpE1ChanCellStatsEntryAn entry in the mscLpE1ChanCellStatsTable. MscLpE1ChanCellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1 |
mscLpE1ChanCellUncorrectableHecErrorsThis attribute indicates the number of uncorrectable ATM cell
header errors that have been detected. Counting of
uncorrectableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detected.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.1 |
mscLpE1ChanCellSevErroredSecThis attribute indicates the total number of ATM Cell Severely
Errored Seconds (SESs) that have been counted.
In direct mapping mode, an ATM Cell SES is declared for second
intervals containing one or more Out of Cell Delineation (OCD)
defects. An OCD defect occurs when seven consecutive incorrect
HECs have been detected. An OCD defect terminates when six
consecutive correct HECs have been detected.
In PLCP mapping mode, an ATM Cell SES is declared for second
intervals containing one or more PLCP LOF defects.
Counting of uncorrectableHeaderErrors (ucErr) and
correctableHeaderErrors (cErr) is inhibited when the OCD defect
is present.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.2 |
mscLpE1ChanCellReceiveCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
received on the link to the nominal link capacity. The utilization is
calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.3 |
mscLpE1ChanCellTransmitCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
transmitted on the link to the nominal link capacity. The utilization
is calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.4 |
mscLpE1ChanCellCorrectableHeaderErrorsThis attribute indicates the number of correctable ATM cell header
errors that have been detected and corrected. Counting of
correctableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detectedro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.5 |
mscLpE1ChanTc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.8.2.4 |
mscLpE1ChanTcRowStatusTableThis entry controls the addition and deletion of
mscLpE1ChanTc components. SEQUENCE OF MscLpE1ChanTcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.4.1 |
mscLpE1ChanTcRowStatusEntryA single entry in the table represents a single
mscLpE1ChanTc component. MscLpE1ChanTcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1 |
mscLpE1ChanTcRowStatusThis variable is used as the basis for SNMP naming of
mscLpE1ChanTc components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.1 |
mscLpE1ChanTcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.2 |
mscLpE1ChanTcStorageTypeThis variable represents the storage type value for the
mscLpE1ChanTc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.4 |
mscLpE1ChanTcIndexThis variable represents the index for the mscLpE1ChanTc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.10 |
mscLpE1ChanTcProvTableThis group contains all specific provisioning data for a Tc
component. SEQUENCE OF MscLpE1ChanTcProvEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.4.10 |
mscLpE1ChanTcProvEntryAn entry in the mscLpE1ChanTcProvTable. MscLpE1ChanTcProvEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1 |
mscLpE1ChanTcReplacementDataThis attribute specifies the trunk conditioning data byte to be
substituted into the timeslots defined by the Chan component under
fault conditions.
replacementData can be set to any two digit hexadecimal number.
The following are recommended values:
DS1 MUX Out Of Service Code = 0x1A
E1 MUX Out Of Service Code = 0xFFrw Hex .1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.1 |
mscLpE1ChanTcSignalOneDurationThis attribute specifies the time duration in seconds for which
signalOne is substituted into the appropriate signaling bits, when a
lineType that uses CAS has been defined. When signalOneDuration
has expired signalTwo is substituted into the appropriate signaling
bits.
If signalOneDuration is set to zero then only signalTwo is
substituted into the appropriate signaling bits during error
conditions.
signalOneDuration can be set to any integer value from 0 to 60
seconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.2 |
mscLpE1ChanTcOpTableThis group contains all specific operational data for a Tc
component. SEQUENCE OF MscLpE1ChanTcOpEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.4.11 |
mscLpE1ChanTcOpEntryAn entry in the mscLpE1ChanTcOpTable. MscLpE1ChanTcOpEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1 |
mscLpE1ChanTcIngressConditioningThis attribute indicates the status of locally generated trunk
conditioning towards the ATM network.
When trunk conditioning is being locally generated towards the
ATM network, ingressConditioning is set to on.
When trunk conditioning is not being locally generated towards the
ATM network, ingressConditioning is set to off.
Trunk conditioning is transmitted towards the ATM network under
the following conditions:
lossOfSignal (LOS)
lossOfFrame (LOF)
remoteAlarmIndication (RAI)
alarmIndicationSignal (AIS)
bufferUnderflow (BU)
and in addition for E1:
lossOfMultiframe (LOMF)
receiveMultiframeRemoteAlarmIndication (RMRAI)ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.1 |
mscLpE1ChanTcEgressConditioningThis attribute indicates the status of locally generated trunk
conditioning towards the PDH line.
When trunk conditioning is being locally generated towards the
PDH line, egressConditioning is set to on.
When trunk conditioning is not being locally generated towards the
PDH line, egressConditioning is set to off.
Trunk conditioning is transmitted towards the PDH line under the
following conditions:
bufferUnderflow (BU)
AAL1 protocol errors.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.2 |
mscLpE1ChanTcSigOneTableThis attribute specifies the value to be substituted into the ABCD
signaling bits for the timeslots defined by the Chan component
under fault conditions. The value will be substituted for the duration
provisioned in signalOneDuration when a lineType that uses CAS
has been defined.
For a lineType of d4Cas (Super Frame), signaling bits C and D are
required to equal bits A and B respectively. SEQUENCE OF MscLpE1ChanTcSigOneEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.4.398 |
mscLpE1ChanTcSigOneEntryAn entry in the mscLpE1ChanTcSigOneTable. MscLpE1ChanTcSigOneEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1 |
mscLpE1ChanTcSigOneIndexThis variable represents the mscLpE1ChanTcSigOneTable
specific index for the mscLpE1ChanTcSigOneTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.1 |
mscLpE1ChanTcSigOneValueThis variable represents an individual value for the
mscLpE1ChanTcSigOneTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.2 |
mscLpE1ChanTcSigTwoTableThis attribute specifies the value to be substituted into the ABCD
signaling bits for the timeslots defined by the Chan component
under fault conditions. The value will be substituted after the
duration provisioned in signalOneDuration has expired and when a
lineType that uses CAS has been defined.
For a lineType of d4Cas (Super Frame), signaling bits C and D are
required to equal bits A and B respectively. SEQUENCE OF MscLpE1ChanTcSigTwoEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.4.399 |
mscLpE1ChanTcSigTwoEntryAn entry in the mscLpE1ChanTcSigTwoTable. MscLpE1ChanTcSigTwoEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1 |
mscLpE1ChanTcSigTwoIndexThis variable represents the mscLpE1ChanTcSigTwoTable
specific index for the mscLpE1ChanTcSigTwoTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.1 |
mscLpE1ChanTcSigTwoValueThis variable represents an individual value for the
mscLpE1ChanTcSigTwoTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.2 |
mscLpE1ChanFlm OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.8.2.5 |
mscLpE1ChanFlmRowStatusTableThis entry controls the addition and deletion of
mscLpE1ChanFlm components. SEQUENCE OF MscLpE1ChanFlmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.5.1 |
mscLpE1ChanFlmRowStatusEntryA single entry in the table represents a single
mscLpE1ChanFlm component. MscLpE1ChanFlmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1 |
mscLpE1ChanFlmRowStatusThis variable is used as the basis for SNMP naming of
mscLpE1ChanFlm components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.1 |
mscLpE1ChanFlmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.2 |
mscLpE1ChanFlmStorageTypeThis variable represents the storage type value for the
mscLpE1ChanFlm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.4 |
mscLpE1ChanFlmIndexThis variable represents the index for the mscLpE1ChanFlm tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.10 |
mscLpE1ChanFlmProvTableThis group contains all specific provisioning data for an Flm
component. SEQUENCE OF MscLpE1ChanFlmProvEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.5.10 |
mscLpE1ChanFlmProvEntryAn entry in the mscLpE1ChanFlmProvTable. MscLpE1ChanFlmProvEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1 |
mscLpE1ChanFlmABitMonitoringThis attribute controls the monitoring of A-bit defects.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.1 |
mscLpE1ChanFlmHdlcMonitoringThis attribute controls the monitoring of HDLC defect.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.2 |
mscLpE1ChanFlmOpTableThis group contains all specific operational data for an Flm
component. SEQUENCE OF MscLpE1ChanFlmOpEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.5.11 |
mscLpE1ChanFlmOpEntryAn entry in the mscLpE1ChanFlmOpTable. MscLpE1ChanFlmOpEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1 |
mscLpE1ChanFlmFlmStatusThis attribute indicates the status of a Frame Relay channel on an
E1 line. By combining the E1 channel-associated-signalling (CAS)
A-bits status, and HDLC defect, a single value indicates the likely
cause of the failure. This mechanism assumes that the far end
equipment loops back signaling A-bits for some or all of the
timeslots in a channel. The A-bits in channel are transmitted as '0'.
If they are all received as '0', it is assumed that the E1 link is up in
both directions. The presence of HDLC frames indicates that the
service is connected.
When A-bits and HDLC frames are correctly received,
frameLinkUp is indicated.
When neither are received, frameLinkDown is indicated.
When HDLC frames are not receive but A-bits are not at fault,
lossOfHdlc is indicated.
When HDLC frames are received, but there is a fault in the any of
timeslot's A-bits on a channel lossOfAbit is indicated.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1.1 |
mscLpE1ChanProvTableThis group contains all of the provisional data for a Channel
component. SEQUENCE OF MscLpE1ChanProvEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.10 |
mscLpE1ChanProvEntryAn entry in the mscLpE1ChanProvTable. MscLpE1ChanProvEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.10.1 |
mscLpE1ChanTimeslotsThis attribute contains the list of timeslots that are used by the
Channel component. Valid numbers are 1-24 for a Channel used by
a DS1 component, and 1-31 for a Channel used by an E1
component.
Description of bits:
notused0(0)
n1(1)
n2(2)
n3(3)
n4(4)
n5(5)
n6(6)
n7(7)
n8(8)
n9(9)
n10(10)
n11(11)
n12(12)
n13(13)
n14(14)
n15(15)
n16(16)
n17(17)
n18(18)
n19(19)
n20(20)
n21(21)
n22(22)
n23(23)
n24(24)
n25(25)
n26(26)
n27(27)
n28(28)
n29(29)
n30(30)
n31(31)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.1 |
mscLpE1ChanTimeslotDataRateThis attribute selects the data rate of the timeslots in a channel of a
DS1 component. For E1, the data rate of the timeslots will always
be 64kbit/s regardless of this attribute.
When doNotOverride is selected for a channel on a DS1, the data
rate of the channel's timeslots are dependant on the zeroCoding
selection of the DS1 component. If the zeroCoding is B8ZS (where
supported on the FP) or none, the timeslot's data rate will be 64kbit/
s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot
will be 56kbit/s.
When 56k is selected for a channel on a DS1, the least significant
bit of each timeslot of this Channel will always be set to 1 and not
used for data. The data rate for the timeslots of this channel is
therefore restricted to 56kbit/s.
One application of this attribute is to allow a DS1 line to support
mixing channels that originate from lines that use different
zeroCoding schemes.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.2 |
mscLpE1ChanApplicationFramerNameThis attribute defines the link to the software stack. It defines which
application is running on top of this hardware component.rw Link .1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.3 |
mscLpE1ChanCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpE1ChanCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.11 |
mscLpE1ChanCidDataEntryAn entry in the mscLpE1ChanCidDataTable. MscLpE1ChanCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.11.1 |
mscLpE1ChanCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.8.2.11.1.1 |
mscLpE1ChanIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpE1ChanIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.12 |
mscLpE1ChanIfEntryEntryAn entry in the mscLpE1ChanIfEntryTable. MscLpE1ChanIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.12.1 |
mscLpE1ChanIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.1 |
mscLpE1ChanIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.2 |
mscLpE1ChanOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpE1ChanOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.13 |
mscLpE1ChanOperStatusEntryAn entry in the mscLpE1ChanOperStatusTable. MscLpE1ChanOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.13.1 |
mscLpE1ChanSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.13.1.1 |
mscLpE1ChanStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpE1ChanStateEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.14 |
mscLpE1ChanStateEntryAn entry in the mscLpE1ChanStateTable. MscLpE1ChanStateEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.14.1 |
mscLpE1ChanAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.1 |
mscLpE1ChanOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.2 |
mscLpE1ChanUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.3 |
mscLpE1ChanAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.4 |
mscLpE1ChanProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.5 |
mscLpE1ChanControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.6 |
mscLpE1ChanAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.7 |
mscLpE1ChanStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.8 |
mscLpE1ChanUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.9 |
mscLpE1ChanOperTableThis group contains all of the operational data for a Channel
component. SEQUENCE OF MscLpE1ChanOperEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.15 |
mscLpE1ChanOperEntryAn entry in the mscLpE1ChanOperTable. MscLpE1ChanOperEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.15.1 |
mscLpE1ChanActualChannelSpeedThis attribute displays the measured link speed of the Channel
component.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.8.2.15.1.1 |
mscLpE1ChanAdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpE1ChanAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.16 |
mscLpE1ChanAdminInfoEntryAn entry in the mscLpE1ChanAdminInfoTable. MscLpE1ChanAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.8.2.16.1 |
mscLpE1ChanVendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.1 |
mscLpE1ChanCommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.2 |
mscLpE1Test OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.8.3 |
mscLpE1TestRowStatusTableThis entry controls the addition and deletion of
mscLpE1Test components. SEQUENCE OF MscLpE1TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.3.1 |
mscLpE1TestRowStatusEntryA single entry in the table represents a single
mscLpE1Test component. MscLpE1TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.3.1.1 |
mscLpE1TestRowStatusThis variable is used as the basis for SNMP naming of
mscLpE1Test components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.1 |
mscLpE1TestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.2 |
mscLpE1TestStorageTypeThis variable represents the storage type value for the
mscLpE1Test tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.4 |
mscLpE1TestIndexThis variable represents the index for the mscLpE1Test tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.10 |
mscLpE1TestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpE1TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.8.3.10 |
mscLpE1TestStateEntryAn entry in the mscLpE1TestStateTable. MscLpE1TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.8.3.10.1 |
mscLpE1TestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.1 |
mscLpE1TestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.2 |
mscLpE1TestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.3 |
mscLpE1TestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpE1TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.8.3.11 |
mscLpE1TestSetupEntryAn entry in the mscLpE1TestSetupTable. MscLpE1TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.8.3.11.1 |
mscLpE1TestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.1 |
mscLpE1TestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.2 |
mscLpE1TestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.3 |
mscLpE1TestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.4 |
mscLpE1TestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.5 |
mscLpE1TestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.6 |
mscLpE1TestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.7 |
mscLpE1TestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.8 |
mscLpE1TestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpE1TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.8.3.12 |
mscLpE1TestResultsEntryAn entry in the mscLpE1TestResultsTable. MscLpE1TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1 |
mscLpE1TestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.1 |
mscLpE1TestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.2 |
mscLpE1TestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.3 |
mscLpE1TestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.4 |
mscLpE1TestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.5 |
mscLpE1TestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.6 |
mscLpE1TestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.7 |
mscLpE1TestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.8 |
mscLpE1TestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.9 |
mscLpE1TestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.10 |
mscLpE1TestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.11 |
mscLpE1Dsp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.8.4 |
mscLpE1DspRowStatusTableThis entry controls the addition and deletion of
mscLpE1Dsp components. SEQUENCE OF MscLpE1DspRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.4.1 |
mscLpE1DspRowStatusEntryA single entry in the table represents a single
mscLpE1Dsp component. MscLpE1DspRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.4.1.1 |
mscLpE1DspRowStatusThis variable is used as the basis for SNMP naming of
mscLpE1Dsp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.1 |
mscLpE1DspComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.2 |
mscLpE1DspStorageTypeThis variable represents the storage type value for the
mscLpE1Dsp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.4 |
mscLpE1DspIndexThis variable represents the index for the mscLpE1Dsp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.10 |
mscLpE1Audio OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.8.5 |
mscLpE1AudioRowStatusTableThis entry controls the addition and deletion of
mscLpE1Audio components. SEQUENCE OF MscLpE1AudioRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.5.1 |
mscLpE1AudioRowStatusEntryA single entry in the table represents a single
mscLpE1Audio component. MscLpE1AudioRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.5.1.1 |
mscLpE1AudioRowStatusThis variable is used as the basis for SNMP naming of
mscLpE1Audio components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.1 |
mscLpE1AudioComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.2 |
mscLpE1AudioStorageTypeThis variable represents the storage type value for the
mscLpE1Audio tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.4 |
mscLpE1AudioIndexThis variable represents the index for the mscLpE1Audio tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.10 |
mscLpE1ProvTableThis group contains all of the provisioning data for an E1
component. SEQUENCE OF MscLpE1ProvEntry .1.3.6.1.4.1.562.36.2.1.12.8.10 |
mscLpE1ProvEntryAn entry in the mscLpE1ProvTable. MscLpE1ProvEntry .1.3.6.1.4.1.562.36.2.1.12.8.10.1 |
mscLpE1LineTypeThis attribute specifies the framing of the E1 line.
When cas (channel associated signalling) is selected, timeslot 16 is
reserved for multiframe signalling and only 30 timeslots are
available for data. The signalling bits are not interpreted.
When ccs (common channel signalling) is selected, timeslot 16 is
not reserved for multiframe signalling and 31 timeslots are available
for data. The signalling bits are not interpreted.
When unframed is selected, a clear channel is defined whereby data
from all timeslots including the framing data (in timeslot 0) and
timeslot 16 are passed transparently. This value is valid only for
AAL1 cards.
For cell-based cards the ATM Forum specifies that timeslot 16 be
reserved, leaving 30 timeslots available for data.
The default value is cas except for the 8pE1Atm card, for which the
default and only valid value is ccs.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.10.1.1 |
mscLpE1ClockingSourceThis attribute defines the source of the transmit clock for the E1
line.
When local is selected, the crystal on the port generates the
clocking for the line.
When line is selected, the port synchronizes to the clock from the
facility.
When module is selected, the ports clock synchronizes to the clock
provided by the oscillator on the active CP.
When otherPort is selected, the port synchronizes to the port with a
clocking source of line.
When srtsMode is selected, the port transmit frequency depends on
the SRTS (Synchronous Residual Time-Stamp) received over the
ATM network. SRTS information is also generated sent over the
ATM network.
When adaptiveMode is selected, the port transmit frequency
continually adapts to match the egress data received from the ATM
network.
A port with srtsMode or adaptiveMode must have a single Chan
which may be linked only to an Aal1Ces.service with serviceType
unstructured
If the NetworkSynchronization component is present, the default
value of this attribute is module, otherwise it defaults to line, except
for the 3pE1Atm card, which it defaults to local.
On a 3pE1Atm card all ports must have the same value, and be
either local or module.
otherPort is valid only on AAL1 cards. srtsMode is valid only on
AAL1 and Multi-Service Access cards. adaptiveMode is valid only
on Multi-Service Access cards.
On 4E1Aal1 cards either:
all four ports' clockingSource values must be local OR
all four ports' clockingSource values must be module OR
one port's clockingSource value must be line and the other three
must be otherPort. A port can only have srtsMode selected if the
other ports are module or srtsMode.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.10.1.2 |
mscLpE1Crc4ModeThis attribute defines whether the CRC-4 checking and generation
on the E1 line is enabled or disabled.
The default CRC-4 mode is off except for the cell-based cards
which default to on as per the ATM Forum.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.10.1.3 |
mscLpE1SendRaiOnAisThis attribute defines whether the Remote Alarm Indicator (RAI)
will be sent when receiving an AIS alarm. The value is yes by
default; it can be changed to no only for ports on J2MV cards.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.10.1.4 |
mscLpE1RaiDeclareAlarmTimeThis attribute specifies the period of time that a Remote Alarm
Indicator (RAI) must be present before declaring an RAI alarm. The
value of auto sets the RAI declare time to the default value for E1
and E1C card types which do not have hardware support for RAI
response. On E1C card types with hardware support, if the value of
auto is set, RAI response is done according to the standards. If auto
is set, the value of the raiClearAlarmTime attribute is ignored and
auto is used. This attribute is for E1 and E1C card types only. For
all other card types, the default value must be used.
VALUES (
0 = auto
)rw Unsigned32 (0 | 1..20000) .1.3.6.1.4.1.562.36.2.1.12.8.10.1.5 |
mscLpE1RaiClearAlarmTimeThis attribute specifies the period of time that a Remote Alarm
Indicator (RAI) has been absent before clearing an RAI alarm. The
value of auto sets the RAI clear time to the default value for E1 and
E1C card types which do not have hardware support for RAI
response. On E1C card types with hardware support, if the value of
auto is set, RAI response is done according to the standards. If auto
is set, the value of the raiDeclareAlarmTime attribute is ignored and
auto is used. This attribute is for E1 and E1C card types only. For
all other card types, the default value must be used.
VALUES (
0 = auto
)rw Unsigned32 (0 | 1..20000) .1.3.6.1.4.1.562.36.2.1.12.8.10.1.6 |
mscLpE1CidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpE1CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.8.11 |
mscLpE1CidDataEntryAn entry in the mscLpE1CidDataTable. MscLpE1CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.8.11.1 |
mscLpE1CustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.8.11.1.1 |
mscLpE1AdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpE1AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.8.12 |
mscLpE1AdminInfoEntryAn entry in the mscLpE1AdminInfoTable. MscLpE1AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.8.12.1 |
mscLpE1VendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.8.12.1.1 |
mscLpE1CommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.8.12.1.2 |
mscLpE1IfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpE1IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.8.13 |
mscLpE1IfEntryEntryAn entry in the mscLpE1IfEntryTable. MscLpE1IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.8.13.1 |
mscLpE1IfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.13.1.1 |
mscLpE1IfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.8.13.1.2 |
mscLpE1OperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpE1OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.14 |
mscLpE1OperStatusEntryAn entry in the mscLpE1OperStatusTable. MscLpE1OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.8.14.1 |
mscLpE1SnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.14.1.1 |
mscLpE1StateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpE1StateEntry .1.3.6.1.4.1.562.36.2.1.12.8.15 |
mscLpE1StateEntryAn entry in the mscLpE1StateTable. MscLpE1StateEntry .1.3.6.1.4.1.562.36.2.1.12.8.15.1 |
mscLpE1AdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.15.1.1 |
mscLpE1OperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.15.1.2 |
mscLpE1UsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.15.1.3 |
mscLpE1AvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.8.15.1.4 |
mscLpE1ProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.8.15.1.5 |
mscLpE1ControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.8.15.1.6 |
mscLpE1AlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.8.15.1.7 |
mscLpE1StandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.15.1.8 |
mscLpE1UnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.15.1.9 |
mscLpE1OperTableThis group contains the common operational data for a component
in a digital hierarchy interface. SEQUENCE OF MscLpE1OperEntry .1.3.6.1.4.1.562.36.2.1.12.8.16 |
mscLpE1OperEntryAn entry in the mscLpE1OperTable. MscLpE1OperEntry .1.3.6.1.4.1.562.36.2.1.12.8.16.1 |
mscLpE1LosAlarmThis attribute displays whether a LOS (Loss of Signal) alarm state
has been entered. A LOS alarm is declared after LOS defects have
been observed and accumulated for a period of 2 seconds +/- 0.5
seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm
cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon
observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm,
8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse
positions with no pulses of either positive or negative polarity). If
the LOS defects are intermittently occurring, the LOS defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle.
The port goes into an operational state of disabled until the LOS
alarm state is cleared. Also, an RAI alarm is transmitted to the far
end for the duration of the LOS alarm state.
The LOS alarm state is cleared when LOS defects are absent for 10
seconds +/- 0.5 seconds.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.16.1.1 |
mscLpE1RxAisAlarmThis attribute displays whether an AIS (Alarm Indication Signal)
alarm state has been entered. The AIS Alarm state is entered when
AIS defects have been observed and accumulated for 2.5 seconds +/
- 0.5 seconds. An AIS defect is detected after having received less
than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both
an Out Of Frame condition exists and a 1's density of at least 99.9%
is present for a time T, where 3 ms T 75 ms; for 8pE1Atm
cards: when both an Out Of Frame condition exists and fewer than
three 0's have been received in 512 bit periods). If the AIS defects
are intermittently occurring, the AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The port goes into an operational state of disabled for the duration
of an AIS alarm state.
The AIS alarm state is cleared when AIS defects are absent for 10
seconds +/- 0.5 seconds.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.16.1.2 |
mscLpE1LofAlarmThis attribute displays whether a LOF (Loss of Frame) alarm state
has been entered. The LOF alarm state is entered when LOF defects
(for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive
frame alignment patterns in error) have been detected for 3 seconds
+/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and
8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects
are intermittently occurring, the LOF defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The port goes into an operational state of disabled until the LOF
alarm state is cleared. Also, an RAI alarm is transmitted to the far
end for the duration of the LOF alarm state
The condition is cleared when framing has been achieved for 10
seconds +/- 0.5 seconds.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.16.1.3 |
mscLpE1RxRaiAlarmThis attribute displays whether an RAI (Remote Alarm Indication)
alarm state has been entered. An RAI alarm state is entered when
the RAI defect indicator has been observed and accumulated for 3.5
seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards:
alarm is declared immediately upon observing the defect is present,
with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm
state is entered when the RAI defect indicator has been observed
and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects
are intermittently occurring, the RAI defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The RAI alarm state is cleared when the RAI defect indicator has
been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and
8pDS1Atm cards: alarm is cleared immediately upon observing the
defect is absent, with no integration time).
The RAI alarm is usually an indication that the far end facility is
unable to gain synchronization.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.16.1.4 |
mscLpE1TxAisAlarmThis attribute displays whether an AIS (Alarm Indication Signal)
alarm is being transmitted on the line. An AIS alarm is transmitted
when the port is in a locked state.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.16.1.5 |
mscLpE1TxRaiAlarmThis attribute displays whether a RAI signal is being sent on the
outgoing line. The RAI signal is transmitted when the port detects a
LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and
8pE1Atm cards: RAI is transmitted when the port detects a LOS,
LOF, or AIS condition).ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.16.1.6 |
mscLpE1E1OperTableThis group contains all of the operational data for a E1 component
that are not defined in the DSCommonOp group. SEQUENCE OF MscLpE1E1OperEntry .1.3.6.1.4.1.562.36.2.1.12.8.17 |
mscLpE1E1OperEntryAn entry in the mscLpE1E1OperTable. MscLpE1E1OperEntry .1.3.6.1.4.1.562.36.2.1.12.8.17.1 |
mscLpE1MultifrmLofAlarmThis attribute indicates whether a multiframe LOF (loss of frame)
alarm state is entered. A multiframe LOF alarm state is entered
when a multiframe LOF defect (2 consecutive errors in the
multiframe alignment signal) has been detected and accumulated
for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are
intermittently occurring, the multiframe LOF defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The alarm is cleared when the defect is not detected for 10 seconds
+/- 0.5 seconds. When the multiframe LOF alarm is on, a
multiframe RAI alarm indicator is transmitted on the line.
The 8pE1Atm card does not support the multiframe LOF alarm.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.17.1.1 |
mscLpE1RxMultifrmRaiAlarmThis attribute displays whether a multiframe RAI (remote alarm
indicator) alarm state has been entered. A multiframe RAI alarm
state is entered when a multiframe RAI alarm indicator (bit 6 of
timeslot 16 in frame 0 is set to a one) is observed and accumulated
for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is
intermittently received, the multiframe RAI defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The multiframe RAI alarm condition is cleared when the
multiframe RAI alarm indication is not received for 10 seconds +/-
0.5 seconds. The multiframe RAI alarm is usually an indication that
the far end facility is unable to gain multiframe synchronization.
The 8pE1Atm card does not support the multiframe RAI alarm.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.17.1.2 |
mscLpE1TxMultifrmRaiAlarmThis attribute displays whether a multiframe RAI (remote alarm
indicator) alarm is being sent on the E1 line. This is transmitted
when the E1 port detects a multiframe LOF condition.
The 8pE1Atm card does not generate the multiframe RAI alarm.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.8.17.1.3 |
mscLpE1StatsTableThis group contains the common statistical data for a component in
a digital hierarchy interface. SEQUENCE OF MscLpE1StatsEntry .1.3.6.1.4.1.562.36.2.1.12.8.18 |
mscLpE1StatsEntryAn entry in the mscLpE1StatsTable. MscLpE1StatsEntry .1.3.6.1.4.1.562.36.2.1.12.8.18.1 |
mscLpE1RunningTimeThe number of seconds since the port component was activated.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.1 |
mscLpE1ErrorFreeSecThe number of seconds that the port has been in an error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.2 |
mscLpE1ErroredSecAn errored second is declared when a second with one or more
Code Violation Error events, or one or more Out Of Frame events
occurs. A code violation error may be a CRC error or a BPV error.
An Out Of Frame event occurs when 2 out of 5 framing bits are in
error.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.3 |
mscLpE1SevErroredSecA severely errored second occurs when a second with 320 or more
Code Violation Error events or one or more Out Of Frame events
occurs.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.4 |
mscLpE1SevErroredFrmSecA severely errored framing second occurs when a second with one
or more Out Of Frame events occurs.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.5 |
mscLpE1UnavailSecThe total number of seconds that the interface is in an unavailable
signal state. An unavailable signal state occurs at the onset of 10
consecutive Severely Errored Seconds. The state is cleared at the
onset of 10 seconds with no Severely Errored Seconds.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.6 |
mscLpE1BpvErrorsThe current count of Bipolar Violations. A bipolar violation is an
error in the alternate mark inversion pattern (AMI) on the line.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.7 |
mscLpE1CrcErrorsIf the interface is a DS1 line, it is the current count of CRC-6 errors.
These will only be counted when the lineType is ESF.
If the interface is an E1 line, it is the total number of CRC-4 errors.
These will only be counted when crc4Mode is on.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.8 |
mscLpE1FrmErrorsThe current count of frame errors. A frame error is an error in the
framing bitsro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.9 |
mscLpE1LosStateChangesThe total number of times that the line lost signal.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.10 |
mscLpE1SlipErrorsThe total number of times that the line experienced a controlled
frame slip. This attribute is incremented for ports on the voice cards
(for example the 1pDS1V and the 1pE1V function processors) only.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.8.18.1.11 |
mscLpV35 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.9 |
mscLpV35RowStatusTableThis entry controls the addition and deletion of
mscLpV35 components. SEQUENCE OF MscLpV35RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.9.1 |
mscLpV35RowStatusEntryA single entry in the table represents a single
mscLpV35 component. MscLpV35RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.9.1.1 |
mscLpV35RowStatusThis variable is used as the basis for SNMP naming of
mscLpV35 components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.9.1.1.1 |
mscLpV35ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.9.1.1.2 |
mscLpV35StorageTypeThis variable represents the storage type value for the
mscLpV35 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.9.1.1.4 |
mscLpV35IndexThis variable represents the index for the mscLpV35 tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.9.1.1.10 |
mscLpV35Test OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.9.2 |
mscLpV35TestRowStatusTableThis entry controls the addition and deletion of
mscLpV35Test components. SEQUENCE OF MscLpV35TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.9.2.1 |
mscLpV35TestRowStatusEntryA single entry in the table represents a single
mscLpV35Test component. MscLpV35TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.9.2.1.1 |
mscLpV35TestRowStatusThis variable is used as the basis for SNMP naming of
mscLpV35Test components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.1 |
mscLpV35TestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.2 |
mscLpV35TestStorageTypeThis variable represents the storage type value for the
mscLpV35Test tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.4 |
mscLpV35TestIndexThis variable represents the index for the mscLpV35Test tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.10 |
mscLpV35TestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpV35TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.9.2.10 |
mscLpV35TestStateEntryAn entry in the mscLpV35TestStateTable. MscLpV35TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.9.2.10.1 |
mscLpV35TestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.1 |
mscLpV35TestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.2 |
mscLpV35TestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.3 |
mscLpV35TestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpV35TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.9.2.11 |
mscLpV35TestSetupEntryAn entry in the mscLpV35TestSetupTable. MscLpV35TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.9.2.11.1 |
mscLpV35TestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.1 |
mscLpV35TestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.2 |
mscLpV35TestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.3 |
mscLpV35TestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.4 |
mscLpV35TestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.5 |
mscLpV35TestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.6 |
mscLpV35TestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.7 |
mscLpV35TestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.8 |
mscLpV35TestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpV35TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.9.2.12 |
mscLpV35TestResultsEntryAn entry in the mscLpV35TestResultsTable. MscLpV35TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1 |
mscLpV35TestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.1 |
mscLpV35TestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.2 |
mscLpV35TestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.3 |
mscLpV35TestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.4 |
mscLpV35TestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.5 |
mscLpV35TestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.6 |
mscLpV35TestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.7 |
mscLpV35TestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.8 |
mscLpV35TestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.9 |
mscLpV35TestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.10 |
mscLpV35TestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.11 |
mscLpV35ProvTableThis group contains all specific provisioning data for a V35
component. SEQUENCE OF MscLpV35ProvEntry .1.3.6.1.4.1.562.36.2.1.12.9.10 |
mscLpV35ProvEntryAn entry in the mscLpV35ProvTable. MscLpV35ProvEntry .1.3.6.1.4.1.562.36.2.1.12.9.10.1 |
mscLpV35LinkModeThis attribute defines the intended gender of the V.35 interface. The
actual gender of the interface is determined by the physical
connection to the patch panel. If the hardware setup does not match
this attribute, an alarm will be generated.
In dte mode, the RTS line signal is driven as specified by the
attribute readyLineState when the interface passes its initial
diagnostics. Then, the RTS line signal will be driven as specified in
the attribute dataTransferLineState when the application is ready to
transfer data. On the other hand, the input line signals (RFS, DSR,
and DCD) are compared against those specified in the attributes
readyLineState and dataTransferLineState. The application will be
notified when the specified input line states are observed.
In dce mode, the V35 component behaves similarly as when it is in
dte mode. However, it will be driving the DCE line signals (RFS,
DSR, and DCD) and monitoring the DTE line signal (RTS) as
specified by the attributes readyLineState and
dataTransferLineState.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.10.1.1 |
mscLpV35ReadyLineStateThis attribute specifies the line signals originating from the V.35
interface that will always be turned on, provided the interface passes
its diagnostics. This set of signals is generally required for
maintaining the connection. Note that both DTE and DCE signals
are specified in this attribute. The appropriate set of specified
signals will be turned on or checked according to the
actualLinkMode.
See also linkMode.
Description of bits:
rfs(0)
dsr(1)
dcd(2)
rts(3)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.9.10.1.2 |
mscLpV35DataTransferLineStateThis attribute specifies the line signals required to indicate that the
external equipment is in a good state (that is, data transfer can
proceed). Note that both DTE and DCE signals are specified in this
attribute. The appropriate set of specified signals will be turned on
or checked according to the actualLinkMode. The value of this
attribute must be a superset of that of the readyLineState attribute.
See also linkMode.
Description of bits:
rfs(0)
dsr(1)
dcd(2)
rts(3)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.9.10.1.3 |
mscLpV35LineStatusTimeOutThis attribute defines the time that the line state must be stable
(good or bad) before a line state change is declared.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.9.10.1.4 |
mscLpV35LineSpeedThis attribute defines the speed of the line for source clocking. This
attribute is ignored if the interface is not providing a clock. The
clock rate is rounded up to the nearest available value. Note that the
actual clock rates are available in the operational attributes
actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds
configurable on a V.35 DCE interface are: 3840000, 2560000,
2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000,
768000, 672000, 640000, 512000, 448000, 384000, 336000,
320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000,
56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000
and 2048000 cannot be provisioned on cards that have ports
provisioned at 3840000, 2560000, 1920000, 1280000, 960000,
640000 or 320000.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.9.10.1.5 |
mscLpV35ClockingSourceThis attribute defines the source of synchronization of the outgoing
clocks. This attribute is only used when the actualLinkMode is dce.
If the value of the attribute is local, the outgoing clocks are
synchronized to a local oscillator on the FP.
If the value of the attribute is module, the outgoing clocks are
synchronized to the oscillator on the active CP.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.10.1.6 |
mscLpV35DteDataClockSourceThis attribute is only used when the actualLinkMode is dce. It is
used to determine the clock to be used to recover the receive data. A
DTE interface uses TSET(DCE) and RSET(DCE) for timing.
If the value of the attribute is fromDce, the DCE uses the internally
generated transmit clock to supply both TSET(DCE) and
RSET(DCE).
If the value of the attribute is fromDte, the DCE still uses the
internally generated transmit clock to supply TSET(DCE), but the
receive timing is derived from TSET(DTE) on the link.
The fromDte mode is recommended when the DTE is far away from
the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit
113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is
CCITT V.24 circuit 115.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.10.1.7 |
mscLpV35ApplicationFramerNameThis attribute contains the component name of a Framer which is
associated with the V35 component.rw Link .1.3.6.1.4.1.562.36.2.1.12.9.10.1.8 |
mscLpV35EnableDynamicSpeedWhen set to yes, this attribute specifies that the transmit link speed
should be set to the calculated receiver link speed. This attribute can
be set to yes only if the linkMode is dce and the
dteDataClockSource is fromDte.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.10.1.9 |
mscLpV35CidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpV35CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.9.11 |
mscLpV35CidDataEntryAn entry in the mscLpV35CidDataTable. MscLpV35CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.9.11.1 |
mscLpV35CustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.9.11.1.1 |
mscLpV35AdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpV35AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.9.12 |
mscLpV35AdminInfoEntryAn entry in the mscLpV35AdminInfoTable. MscLpV35AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.9.12.1 |
mscLpV35VendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.9.12.1.1 |
mscLpV35CommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.9.12.1.2 |
mscLpV35IfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpV35IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.9.13 |
mscLpV35IfEntryEntryAn entry in the mscLpV35IfEntryTable. MscLpV35IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.9.13.1 |
mscLpV35IfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.13.1.1 |
mscLpV35IfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.9.13.1.2 |
mscLpV35OperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpV35OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.9.14 |
mscLpV35OperStatusEntryAn entry in the mscLpV35OperStatusTable. MscLpV35OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.9.14.1 |
mscLpV35SnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.14.1.1 |
mscLpV35StateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpV35StateEntry .1.3.6.1.4.1.562.36.2.1.12.9.15 |
mscLpV35StateEntryAn entry in the mscLpV35StateTable. MscLpV35StateEntry .1.3.6.1.4.1.562.36.2.1.12.9.15.1 |
mscLpV35AdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.15.1.1 |
mscLpV35OperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.15.1.2 |
mscLpV35UsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.15.1.3 |
mscLpV35AvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.9.15.1.4 |
mscLpV35ProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.9.15.1.5 |
mscLpV35ControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.9.15.1.6 |
mscLpV35AlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.9.15.1.7 |
mscLpV35StandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.15.1.8 |
mscLpV35UnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.15.1.9 |
mscLpV35OperTableThis group contains all specific operational data for a V35
component. SEQUENCE OF MscLpV35OperEntry .1.3.6.1.4.1.562.36.2.1.12.9.16 |
mscLpV35OperEntryAn entry in the mscLpV35OperTable. MscLpV35OperEntry .1.3.6.1.4.1.562.36.2.1.12.9.16.1 |
mscLpV35ActualLinkModeThis attribute contains the actual link mode defined by the
hardware. Note that the hardware overrides the provisionable data.
The interface behaves as a DCE or DTE according to the
actualLinkMode.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.9.16.1.1 |
mscLpV35LineStateThis attribute contains the current state of the interface signals.
Description of bits:
rfs(0)
dsr(1)
dcd(2)
rts(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.9.16.1.2 |
mscLpV35ActualTxLineSpeedThis attribute is the measured speed of the transmit clock.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.9.16.1.3 |
mscLpV35ActualRxLineSpeedThis attribute is the measured speed of the receive clock.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.9.16.1.4 |
mscLpV35DataXferStateChangesThis attribute contains the number of times that the line has entered
or exited the data transfer state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.9.16.1.5 |
mscLpX21 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.10 |
mscLpX21RowStatusTableThis entry controls the addition and deletion of
mscLpX21 components. SEQUENCE OF MscLpX21RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.10.1 |
mscLpX21RowStatusEntryA single entry in the table represents a single
mscLpX21 component. MscLpX21RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.10.1.1 |
mscLpX21RowStatusThis variable is used as the basis for SNMP naming of
mscLpX21 components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.10.1.1.1 |
mscLpX21ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.10.1.1.2 |
mscLpX21StorageTypeThis variable represents the storage type value for the
mscLpX21 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.10.1.1.4 |
mscLpX21IndexThis variable represents the index for the mscLpX21 tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.10.1.1.10 |
mscLpX21Test OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.10.2 |
mscLpX21TestRowStatusTableThis entry controls the addition and deletion of
mscLpX21Test components. SEQUENCE OF MscLpX21TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.10.2.1 |
mscLpX21TestRowStatusEntryA single entry in the table represents a single
mscLpX21Test component. MscLpX21TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.10.2.1.1 |
mscLpX21TestRowStatusThis variable is used as the basis for SNMP naming of
mscLpX21Test components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.1 |
mscLpX21TestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.2 |
mscLpX21TestStorageTypeThis variable represents the storage type value for the
mscLpX21Test tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.4 |
mscLpX21TestIndexThis variable represents the index for the mscLpX21Test tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.10 |
mscLpX21TestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpX21TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.10.2.10 |
mscLpX21TestStateEntryAn entry in the mscLpX21TestStateTable. MscLpX21TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.10.2.10.1 |
mscLpX21TestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.1 |
mscLpX21TestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.2 |
mscLpX21TestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.3 |
mscLpX21TestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpX21TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.10.2.11 |
mscLpX21TestSetupEntryAn entry in the mscLpX21TestSetupTable. MscLpX21TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.10.2.11.1 |
mscLpX21TestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.1 |
mscLpX21TestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.2 |
mscLpX21TestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.3 |
mscLpX21TestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.4 |
mscLpX21TestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.5 |
mscLpX21TestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.6 |
mscLpX21TestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.7 |
mscLpX21TestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.8 |
mscLpX21TestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpX21TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.10.2.12 |
mscLpX21TestResultsEntryAn entry in the mscLpX21TestResultsTable. MscLpX21TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1 |
mscLpX21TestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.1 |
mscLpX21TestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.2 |
mscLpX21TestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.3 |
mscLpX21TestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.4 |
mscLpX21TestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.5 |
mscLpX21TestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.6 |
mscLpX21TestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.7 |
mscLpX21TestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.8 |
mscLpX21TestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.9 |
mscLpX21TestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.10 |
mscLpX21TestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.11 |
mscLpX21ProvTableThis group contains all specific provisioning data for an X21
component. SEQUENCE OF MscLpX21ProvEntry .1.3.6.1.4.1.562.36.2.1.12.10.10 |
mscLpX21ProvEntryAn entry in the mscLpX21ProvTable. MscLpX21ProvEntry .1.3.6.1.4.1.562.36.2.1.12.10.10.1 |
mscLpX21LinkModeThis attribute defines the intended gender of the X21 component
(V.11 interface). The actual gender of the interface is determined by
the physical connection to the patch panel. If the hardware setup
does not match this attribute, an alarm will be generated.
In dte mode, the control line signal is driven as specified by the
attribute readyLineState when the interface passes its initial
diagnostics. Then, the control line signal will be driven as specified
in the attribute dataTransferLineState when the application is ready
to transfer data. On the other hand, the input line signal (indication)
is compared against those specified in the attributes readyLineState
and dataTransferLineState. The application will be notified when
the specified line states are observed.
In dce mode, the X21 component behaves similarly as when it is in
dte mode. However, it will be driving the DCE line signal (control)
and monitoring the DTE line signal (indication) as specified by the
attributes readyLineState and dataTransferLineState.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.10.1.1 |
mscLpX21ReadyLineStateThis attribute specifies the line signals originating from the V.11
interface that will always be turned on, provided the interface passes
its diagnostics. This set of signals is generally required to maintain
the connection. Note that both DTE and DCE signals are specified
in this attribute. The appropriate set of specified signals will be
turned on or checked according to the actualLinkMode.
See also linkMode.
Description of bits:
indication(0)
control(1)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.10.10.1.2 |
mscLpX21DataTransferLineStateThe state of the line signals required to indicate that the external
equipment is in a good state (that is, data transfer can proceed).
Note that both DTE and DCE signals are specified in this attribute.
The appropriate set of specified signals will be turned on or checked
according to the actualLinkMode. The value of this attribute must
be a superset of that of the readyLineState attribute.
See also linkMode.
Description of bits:
indication(0)
control(1)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.10.10.1.3 |
mscLpX21LineStatusTimeOutThis attribute defines the time the line state must be stable (good or
bad) before a state change is declared.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.10.10.1.4 |
mscLpX21LineSpeedThis attribute defines the speed of the line for source clocking. This
attribute is ignored if the interface is not providing a clock. The
clock rate is rounded up to the nearest available value. Note that the
actual clock rates are available in the operational attributes
actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds
configurable on a V.11 DCE interface are: 7680000, 3840000,
2560000, 2048000, 1920000, 1536000, 1344000, 1280000,
1024000, 960000, 768000, 672000, 640000, 512000, 448000,
384000, 336000, 320000, 256000, 224000, 192000, 168000,
128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note
that linspeeds of 1024000 and 2048000 cannot be provisioned on
cards that have ports provisioned at 3840000, 2560000, 1920000,
1280000, 960000, 640000 or 320000.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.10.10.1.5 |
mscLpX21ClockingSourceThis attribute defines the source of synchronization of the outgoing
clocks. This attribute is only used when the actualLinkMode is dce.
If the value of the attribute is local, the outgoing clocks are
synchronized to a local oscillator on the FP.
If the value of the attribute is module, the outgoing clocks are
synchronized to the oscillator on the active CP.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.10.1.6 |
mscLpX21DteDataClockSourceThis attribute is only used when the actualLinkMode is dce. It is
used to determine the clock to be used to recover the receive data.
Note that a V.11 DTE interface uses the S clock (see X.21 standard)
for both receive data and transmit data timing. The DTE interface
always loops the received S clock back to the DCE as the X clock
(see X.21 standard).
If the value of the attribute is fromDce, the DCE V.11 interface uses
the internally generated transmit clock as the S clock and for both
receive and transmit data timing. The X clock is ignored.
If the value of the attribute is fromDte, the DCE still uses the
internally generated transmit clock as the S clock and for transmit
data timing, but the receive data timing is derived from the X clock.
The fromDte mode is recommended when the DTE is far away from
the DCE interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.10.1.7 |
mscLpX21LineTerminationRequiredThis attribute specifies whether termination is required for this
interface. If the hardware setup does not match this attribute, an
alarm will be generated.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.10.1.8 |
mscLpX21ApplicationFramerNameThis attribute contains the component name of a Framer which is
associated with the X21 component.rw Link .1.3.6.1.4.1.562.36.2.1.12.10.10.1.9 |
mscLpX21EnableDynamicSpeedWhen set to yes, this attribute specifies that the transmit link speed
should be set to the calculated receiver link speed. This attribute can
be set to yes only if the linkMode is dce and the
dteDataClockSource is fromDte..rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.10.1.10 |
mscLpX21CidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpX21CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.10.11 |
mscLpX21CidDataEntryAn entry in the mscLpX21CidDataTable. MscLpX21CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.10.11.1 |
mscLpX21CustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.10.11.1.1 |
mscLpX21AdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpX21AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.10.12 |
mscLpX21AdminInfoEntryAn entry in the mscLpX21AdminInfoTable. MscLpX21AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.10.12.1 |
mscLpX21VendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.10.12.1.1 |
mscLpX21CommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.10.12.1.2 |
mscLpX21IfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpX21IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.10.13 |
mscLpX21IfEntryEntryAn entry in the mscLpX21IfEntryTable. MscLpX21IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.10.13.1 |
mscLpX21IfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.13.1.1 |
mscLpX21IfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.10.13.1.2 |
mscLpX21OperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpX21OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.10.14 |
mscLpX21OperStatusEntryAn entry in the mscLpX21OperStatusTable. MscLpX21OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.10.14.1 |
mscLpX21SnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.14.1.1 |
mscLpX21StateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpX21StateEntry .1.3.6.1.4.1.562.36.2.1.12.10.15 |
mscLpX21StateEntryAn entry in the mscLpX21StateTable. MscLpX21StateEntry .1.3.6.1.4.1.562.36.2.1.12.10.15.1 |
mscLpX21AdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.15.1.1 |
mscLpX21OperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.15.1.2 |
mscLpX21UsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.15.1.3 |
mscLpX21AvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.10.15.1.4 |
mscLpX21ProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.10.15.1.5 |
mscLpX21ControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.10.15.1.6 |
mscLpX21AlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.10.15.1.7 |
mscLpX21StandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.15.1.8 |
mscLpX21UnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.15.1.9 |
mscLpX21OperTableThis group contains all specific operational data for an X21
component. SEQUENCE OF MscLpX21OperEntry .1.3.6.1.4.1.562.36.2.1.12.10.16 |
mscLpX21OperEntryAn entry in the mscLpX21OperTable. MscLpX21OperEntry .1.3.6.1.4.1.562.36.2.1.12.10.16.1 |
mscLpX21ActualLinkModeThis attribute contains the actual link mode defined by the
hardware. Note that the hardware overrides the provisionable data.
The interface behaves as a DCE or DTE according to the
actualLinkMode.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.10.16.1.1 |
mscLpX21LineStateThis attribute contains the current state of the interface signals.
Description of bits:
indication(0)
control(1)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.10.16.1.2 |
mscLpX21ActualTxLineSpeedThis attribute is the measured speed of the transmit clock.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.10.16.1.3 |
mscLpX21ActualRxLineSpeedThis attribute is the measured speed of the receive clock.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.10.16.1.4 |
mscLpX21DataXferStateChangesThis attribute contains the number of times that the line has entered
or exited the data transfer state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.10.16.1.5 |
mscLpSonet OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.14 |
mscLpSonetRowStatusTableThis entry controls the addition and deletion of
mscLpSonet components. SEQUENCE OF MscLpSonetRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.1 |
mscLpSonetRowStatusEntryA single entry in the table represents a single
mscLpSonet component. MscLpSonetRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.1.1 |
mscLpSonetRowStatusThis variable is used as the basis for SNMP naming of
mscLpSonet components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.1.1.1 |
mscLpSonetComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.1.1.2 |
mscLpSonetStorageTypeThis variable represents the storage type value for the
mscLpSonet tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.1.1.4 |
mscLpSonetIndexThis variable represents the index for the mscLpSonet tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.14.1.1.10 |
mscLpSonetPath OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.14.2 |
mscLpSonetPathRowStatusTableThis entry controls the addition and deletion of
mscLpSonetPath components. SEQUENCE OF MscLpSonetPathRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.1 |
mscLpSonetPathRowStatusEntryA single entry in the table represents a single
mscLpSonetPath component. MscLpSonetPathRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.1.1 |
mscLpSonetPathRowStatusThis variable is used as the basis for SNMP naming of
mscLpSonetPath components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.1 |
mscLpSonetPathComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.2 |
mscLpSonetPathStorageTypeThis variable represents the storage type value for the
mscLpSonetPath tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.4 |
mscLpSonetPathIndexThis variable represents the index for the mscLpSonetPath tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.10 |
mscLpSonetPathCell OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.14.2.2 |
mscLpSonetPathCellRowStatusTableThis entry controls the addition and deletion of
mscLpSonetPathCell components. SEQUENCE OF MscLpSonetPathCellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.2.1 |
mscLpSonetPathCellRowStatusEntryA single entry in the table represents a single
mscLpSonetPathCell component. MscLpSonetPathCellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1 |
mscLpSonetPathCellRowStatusThis variable is used as the basis for SNMP naming of
mscLpSonetPathCell components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.1 |
mscLpSonetPathCellComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.2 |
mscLpSonetPathCellStorageTypeThis variable represents the storage type value for the
mscLpSonetPathCell tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.4 |
mscLpSonetPathCellIndexThis variable represents the index for the mscLpSonetPathCell tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.10 |
mscLpSonetPathCellProvTableThis group contains the provisioning attributes for the AtmCell
component. SEQUENCE OF MscLpSonetPathCellProvEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.2.10 |
mscLpSonetPathCellProvEntryAn entry in the mscLpSonetPathCellProvTable. MscLpSonetPathCellProvEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1 |
mscLpSonetPathCellAlarmActDelayThis attribute defines the time during which a Loss of Cell
Delineation (LCD) defect should be observed before declaring an
LCD alarm (alarm 70115501). The time is specified in milliseconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.1 |
mscLpSonetPathCellScrambleCellPayloadCell scrambling, as defined by ITU-T Recommendation I.432., can
provide a solution to the problem of transmission equipment which
is sensitive to certain bit patterns in the ATM cell payload. This
attribute controls whether or not the cell payload is scrambled.
It defaults to off for DS1 interfaces, and on for all other interfaces.
Note that this setting must be the same at both ends of the link.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.2 |
mscLpSonetPathCellCorrectSingleBitHeaderErrorsThis attribute specifies whether the port corrects single bit errors
detected in the headers of received cells. If single bit errors are
corrected, the affected cells are passed up to the ATM layer
according to normal operation. If single bit errors are not corrected,
these errored cells are discarded by the physical layer. Note that
cells containing multiple bit errors in their headers are always
discarded.
Single bit HEC error correction must remain off for the following
card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm,
2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.3 |
mscLpSonetPathCellOperTableThis group contains the common operational attributes for the
AtmCell component. SEQUENCE OF MscLpSonetPathCellOperEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.2.11 |
mscLpSonetPathCellOperEntryAn entry in the mscLpSonetPathCellOperTable. MscLpSonetPathCellOperEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1 |
mscLpSonetPathCellLcdAlarmThis attribute displays whether the Loss of Cell Delineation (LCD)
failure alarm state has been entered. This state is entered when LCD
defects have been observed and accumulated for a period of time
specified through the alarmActDelay attribute.
In ATM cell direct mapping mode, an LCD defect occurs when Out
of Cell Delineation (OCD) anomaly persists for x milliseconds, and
disappears when the Out of Cell Delineation (OCD) is absent for x
msec. An OCD anomaly occurs when 7 consecutive incorrect HECs
have been detected. An OCD anomaly terminates when 6
consecutive correct HECs have been detected.
For an AtmCell component located under a DS3 or E3 component
with mapping = PLCP, the LCD defect is directly derived from the
PLCP LOF defect.
If LCD defects are intermittently occurring, the LCD defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle
The component under which is located the AtmCell component goes
into an operational state of disabled until the LCD alarm condition
is cleared. The condition is cleared after the LCD defect has not
been reported for a period of 10 seconds +/- 0.5 seconds.
The lcdAlarm attribute is always set to off when the parent of the
AtmCell component has been locked and left offline. This can also
happen when the Path or Channel component has been suspended
since its parent has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1.1 |
mscLpSonetPathCellStatsTableThis group contains the Statistics attribute for the AtmCell
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpSonetPathCellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.2.12 |
mscLpSonetPathCellStatsEntryAn entry in the mscLpSonetPathCellStatsTable. MscLpSonetPathCellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1 |
mscLpSonetPathCellUncorrectableHecErrorsThis attribute indicates the number of uncorrectable ATM cell
header errors that have been detected. Counting of
uncorrectableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detected.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.1 |
mscLpSonetPathCellSevErroredSecThis attribute indicates the total number of ATM Cell Severely
Errored Seconds (SESs) that have been counted.
In direct mapping mode, an ATM Cell SES is declared for second
intervals containing one or more Out of Cell Delineation (OCD)
defects. An OCD defect occurs when seven consecutive incorrect
HECs have been detected. An OCD defect terminates when six
consecutive correct HECs have been detected.
In PLCP mapping mode, an ATM Cell SES is declared for second
intervals containing one or more PLCP LOF defects.
Counting of uncorrectableHeaderErrors (ucErr) and
correctableHeaderErrors (cErr) is inhibited when the OCD defect
is present.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.2 |
mscLpSonetPathCellReceiveCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
received on the link to the nominal link capacity. The utilization is
calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.3 |
mscLpSonetPathCellTransmitCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
transmitted on the link to the nominal link capacity. The utilization
is calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.4 |
mscLpSonetPathCellCorrectableHeaderErrorsThis attribute indicates the number of correctable ATM cell header
errors that have been detected and corrected. Counting of
correctableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detectedro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.5 |
mscLpSonetPathProvTableThis group contains all of the provisioning data for a Sonet/Sdh
Path component. SEQUENCE OF MscLpSonetPathProvEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.10 |
mscLpSonetPathProvEntryAn entry in the mscLpSonetPathProvTable. MscLpSonetPathProvEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.10.1 |
mscLpSonetPathApplicationFramerNameThis attribute defines the link to the software stack. It defines which
application is running on top of the Path component.rw Link .1.3.6.1.4.1.562.36.2.1.12.14.2.10.1.1 |
mscLpSonetPathCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpSonetPathCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.11 |
mscLpSonetPathCidDataEntryAn entry in the mscLpSonetPathCidDataTable. MscLpSonetPathCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.11.1 |
mscLpSonetPathCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.14.2.11.1.1 |
mscLpSonetPathStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpSonetPathStateEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.12 |
mscLpSonetPathStateEntryAn entry in the mscLpSonetPathStateTable. MscLpSonetPathStateEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.12.1 |
mscLpSonetPathAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.1 |
mscLpSonetPathOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.2 |
mscLpSonetPathUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.3 |
mscLpSonetPathAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.4 |
mscLpSonetPathProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.5 |
mscLpSonetPathControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.6 |
mscLpSonetPathAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.7 |
mscLpSonetPathStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.8 |
mscLpSonetPathUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.9 |
mscLpSonetPathIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpSonetPathIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.13 |
mscLpSonetPathIfEntryEntryAn entry in the mscLpSonetPathIfEntryTable. MscLpSonetPathIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.13.1 |
mscLpSonetPathIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.1 |
mscLpSonetPathIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.2 |
mscLpSonetPathOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpSonetPathOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.14 |
mscLpSonetPathOperStatusEntryAn entry in the mscLpSonetPathOperStatusTable. MscLpSonetPathOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.14.1 |
mscLpSonetPathSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.14.1.1 |
mscLpSonetPathOperTableThis group contains the common operational data for Path
component. SEQUENCE OF MscLpSonetPathOperEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.15 |
mscLpSonetPathOperEntryAn entry in the mscLpSonetPathOperTable. MscLpSonetPathOperEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.15.1 |
mscLpSonetPathLopAlarmThis attribute displays whether a Loss Of Pointer (LOP) alarm state
has been entered. An LOP alarm state is entered when LOP defects
have been observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds. An LOP defect occurs when no valid SPE or VC
pointer was received in 8 contiguous frames. If the LOP defects are
intermittently occurring, the LOP defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The Path component goes into an operational state of disabled until
the LOP alarm condition is cleared. The condition is cleared when
no more invalid pointer has been reported for 10 seconds +/- 0.5
seconds.
The lopAlarm attribute is always set to off when the Path
component has been locked and left offline by the operator or when
the Path component has been suspended since the parent component
has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.1 |
mscLpSonetPathRxAisAlarmThis attribute displays whether an Path Alarm Indication Signal (P-
AIS) alarm state has been entered. An P-AIS alarm state is entered
when P-AIS defects have been observed and accumulated for a
period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the
occurrence of the P-AIS signal in three contiguous valid STS or
STM frames (all one's in bytes H1 and H2). If the P-AIS defects are
intermittently occurring, the P-AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The Path component goes into an operational state of disabled until
the P-AIS alarm condition is cleared. The condition is cleared after
no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds.
The rxAisAlarm attribute is always set to off when the Path
component has been locked and left offline by the operator or when
the Path component has been suspended since the parent component
has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.2 |
mscLpSonetPathRxRfiAlarmThis attribute displays whether the Path Remote Failure Indication
(P-RFI) alarm state has been entered. An P-RFI alarm state is
entered when Path Remote Defect Indicator (P-RDI) defects have
been observed and accumulated for a period of 2.5 seconds +/- 0.5
seconds. The P-RDI defect is the occurrence of the P-RDI signal in
five contiguous valid STS or STM frames (bit 5 of the G1 byte set
to 1). If the P-RDI defects are intermittently occurring, the P-RDI
defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10)with all
measurements based on a 200 ms polling cycle.
The Path component goes into an operational state of disabled until
the P-RFI alarm condition is cleared. The condition is cleared after
no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds.
The rxRfiAlarm attribute is always set to off when the Path
component has been locked and left offline by the operator or when
the Path component has been suspended since the parent component
has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.3 |
mscLpSonetPathSignalLabelMismatchThis attribute displays whether the Path Signal Label Mismatch (P-
SLM) failure condition has been entered. An P-SLM failure
condition is entered when P-SLM defects have been observed and
accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM
defect occurs when detecting an unexpected path signal label. The
expected Path signal labels are 'Mapping for ATM' or 'Equipped -
Non Specific Payload'. If the P-SLM defects are intermittently
occurring, the P-SLM defect accumulator is decremented at a rate
of 1/10 of the incrementing rate (alarm integration ratio of 1/10),
with all measurements based on a 200 ms polling cycle.
The Path component goes into an operational state of disabled until
the Path Signal Label Mismatch failure condition is cleared. The
condition is cleared when an expected path signal label is received
for 10 seconds +/- 0.5 seconds.
The signalLabelMismatch attribute is always set to off when the
Path component has been locked and left offline by the operator or
when the Path component has been suspended since the parent
component has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.4 |
mscLpSonetPathTxAisThis attribute displays whether the Path Alarm Indication Signal (P-
AIS) signal is being transmitted on the path. The P-AIS signal is
transmitted when the Path component has been locked and left
offline by the operator or when the Path component has been
suspended since the parent component has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.5 |
mscLpSonetPathTxRdiThis attribute displays whether the Path Remote Defect Indicator
(P-RDI) signal is being transmitted over the path signal. The P-RDI
signal is transmitted over the outgoing line upon detection of LOP,
P-AIS or the occurrence of the LCD state. This attribute is always
set to off when the Path component has been locked and left offline
by the operator or when the Path component has been suspended
since the parent component has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.6 |
mscLpSonetPathStatsTableThis group contains the statistics data for a Sonet/Sdh Path
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpSonetPathStatsEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.16 |
mscLpSonetPathStatsEntryAn entry in the mscLpSonetPathStatsTable. MscLpSonetPathStatsEntry .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1 |
mscLpSonetPathPathErrorFreeSecThis attribute indicates the number of seconds that the Sonet/Sdh
Path component has been in an near-end error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.1 |
mscLpSonetPathPathCodeViolationsThis attribute indicates the total number of Path Code Violations
(PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV
counting is inhibited over second intervals where a Path Severely
Errored Second (PSES) is counted. Counting of PCVs is also
inhibited over second intervals where a Path Unavailable Second
(PUAS) is counted. The count wraps at its maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.2 |
mscLpSonetPathPathErroredSecThis attribute indicates the total number of Path Errored Seconds
(PESs) that have been counted. A PES is declared for second
intervals containing one or more PCVs or one or more LOP or path
AIS defects. Counting of PES is inhibited when PUAS is counted
over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.3 |
mscLpSonetPathPathSevErroredSecThis attribute indicates the total number of Path Severely Errored
Seconds (PSESs) that have been counted. A PSES is declared for
second intervals containing more than x PCVs or one or more LOP
or path AIS defects. The value of x is 2400 for a 155 Mbits/sec
interface. Counting of PSES is inhibited when PUAS is counted
over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.4 |
mscLpSonetPathPathAisLopSecThis attribute indicates the total number of path AIS and LOP
Seconds (PALSs). A PALS is declared for second intervals
containing one or more path AIS or LOP defects. Counting of PALS
is inhibited when PUAS is counted over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.5 |
mscLpSonetPathPathUnavailSecThis attribute indicates the total number of one second intervals for
which the STS/STM path is unavailable. The path becomes
unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are
included in the unavailable time. Once unavailable, the path
becomes available at the onset of 10 contiguous seconds with no
PSES. The 10 seconds with no PSES are excluded from the
unavailable time. For second intervals where a Path Unavailable
Second (PUAS) is counted, counting of PCV, PES, PSES and PALS
is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.6 |
mscLpSonetPathPathFailuresThis attribute indicates the total number of times that a path failure
(LOP, P-AIS or Path Signal Label Mismatch failure) has been
declared.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.7 |
mscLpSonetPathFarEndPathErrorFreeSecThis attribute indicates the number of seconds that the Sonet/Sdh
Path component has been in an far-end error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.8 |
mscLpSonetPathFarEndPathCodeViolationsThis attribute indicates the total number of Far-End Path Code
Violations (FEPCVs) detected. Each FEPCV corresponds to a path
FEBE. FEPCV counting is inhibited over second intervals where a
Far-End Path Severely Errored Second (FEPSES) is counted.
Counting of PCVs is also inhibited over second intervals where a
Far-End Path Unavailable Second (FEPUAS) is counted. The count
wraps at its maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.9 |
mscLpSonetPathFarEndPathErroredSecThis attribute indicates the total number of Far-End Path Errored
Seconds (FEPESs) that have been counted. A FEPES is declared for
second intervals containing one or more FEPCVs or one or more
path RDI (P-RDI) defects. Counting of FEPES is inhibited when
FEPUAS is counted over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.10 |
mscLpSonetPathFarEndPathSevErroredSecThis attribute indicates the total number of Far-End Path Severely
Errored Seconds (FEPSESs) that have been counted. A FEPSES is
declared for second intervals containing more than x FEPCVs or
one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/
sec interface. Counting of FEPSESs is inhibited when FEPUAS is
counted over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.11 |
mscLpSonetPathFarEndPathAisLopSecThis attribute indicates the total number of Far-End Path AIS and
LOP Seconds (FEPALSs). A FEPALS is declared for second
intervals containing one or more P-RDI defects. Counting of
FEPALS is inhibited when FEPUAS is counted over the monitored
second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.12 |
mscLpSonetPathFarEndPathUnavailSecThis attribute indicates the total number of one second intervals for
which the STS/STM far-end path is unavailable. The far-end path
becomes unavailable at the onset of 10 consecutive FEPSESs. The
10 FEPSESs are included in the unavailable time. Once unavailable,
the far-end path becomes available at the onset of 10 contiguous
seconds with no FEPSES. The 10 seconds with no FEPSES are
excluded from the unavailable time. For second intervals where a
Far-End Path Unavailable Second (FEPUAS) is counted, counting
of FEPCV, FEPES, FEPSES and FEPALS is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.13 |
mscLpSonetPathFarEndPathFailuresThis attribute indicates the total number of times that a STS/STM
far-end path failure (P-RFI failure) has been declared.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.14 |
mscLpSonetTest OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.14.3 |
mscLpSonetTestRowStatusTableThis entry controls the addition and deletion of
mscLpSonetTest components. SEQUENCE OF MscLpSonetTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.3.1 |
mscLpSonetTestRowStatusEntryA single entry in the table represents a single
mscLpSonetTest component. MscLpSonetTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.3.1.1 |
mscLpSonetTestRowStatusThis variable is used as the basis for SNMP naming of
mscLpSonetTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.1 |
mscLpSonetTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.2 |
mscLpSonetTestStorageTypeThis variable represents the storage type value for the
mscLpSonetTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.4 |
mscLpSonetTestIndexThis variable represents the index for the mscLpSonetTest tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.10 |
mscLpSonetTestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpSonetTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.14.3.10 |
mscLpSonetTestStateEntryAn entry in the mscLpSonetTestStateTable. MscLpSonetTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.14.3.10.1 |
mscLpSonetTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.1 |
mscLpSonetTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.2 |
mscLpSonetTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.3 |
mscLpSonetTestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpSonetTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.14.3.11 |
mscLpSonetTestSetupEntryAn entry in the mscLpSonetTestSetupTable. MscLpSonetTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.14.3.11.1 |
mscLpSonetTestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.1 |
mscLpSonetTestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.2 |
mscLpSonetTestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.3 |
mscLpSonetTestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.4 |
mscLpSonetTestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.5 |
mscLpSonetTestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.6 |
mscLpSonetTestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.7 |
mscLpSonetTestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.8 |
mscLpSonetTestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpSonetTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.14.3.12 |
mscLpSonetTestResultsEntryAn entry in the mscLpSonetTestResultsTable. MscLpSonetTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1 |
mscLpSonetTestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.1 |
mscLpSonetTestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.2 |
mscLpSonetTestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.3 |
mscLpSonetTestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.4 |
mscLpSonetTestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.5 |
mscLpSonetTestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.6 |
mscLpSonetTestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.7 |
mscLpSonetTestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.8 |
mscLpSonetTestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.9 |
mscLpSonetTestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.10 |
mscLpSonetTestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.11 |
mscLpSonetProvTableThis group contains all of the provisioning data for a Sonet or Sdh
component. SEQUENCE OF MscLpSonetProvEntry .1.3.6.1.4.1.562.36.2.1.12.14.10 |
mscLpSonetProvEntryAn entry in the mscLpSonetProvTable. MscLpSonetProvEntry .1.3.6.1.4.1.562.36.2.1.12.14.10.1 |
mscLpSonetClockingSourceThis attribute defines the type of clocking source used for
synchronizing the OC-3 transmit clock: local means direct use of
the local clock oscillator at its centre frequency; line means the use
of a signal phase-locked to the incoming OC-3 line rate; module
means the use of a signal phase-locked to the CP reference clock.
When adding a Sonet/Sdh component, the clockingSource attribute
is set to module if the NetworkSynchronization component has
been added and is set to local otherwise.
Note that the multiport OC-3 cell-based cards has one common
clock source for each of the three ports when either the clocking
source local or module is selected. For this reason, it is not allowed
to have at the same time the clockingSource attribute set to local on
one port and module on another port. Furthermore, the
clockingSource attribute cannot be set to module if the
NetworkSynchronization component has not been added.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.10.1.1 |
mscLpSonetCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpSonetCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.14.11 |
mscLpSonetCidDataEntryAn entry in the mscLpSonetCidDataTable. MscLpSonetCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.14.11.1 |
mscLpSonetCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.14.11.1.1 |
mscLpSonetAdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpSonetAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.14.12 |
mscLpSonetAdminInfoEntryAn entry in the mscLpSonetAdminInfoTable. MscLpSonetAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.14.12.1 |
mscLpSonetVendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.14.12.1.1 |
mscLpSonetCommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.14.12.1.2 |
mscLpSonetIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpSonetIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.14.13 |
mscLpSonetIfEntryEntryAn entry in the mscLpSonetIfEntryTable. MscLpSonetIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.14.13.1 |
mscLpSonetIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.13.1.1 |
mscLpSonetIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.14.13.1.2 |
mscLpSonetOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpSonetOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.14 |
mscLpSonetOperStatusEntryAn entry in the mscLpSonetOperStatusTable. MscLpSonetOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.14.14.1 |
mscLpSonetSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.14.1.1 |
mscLpSonetStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpSonetStateEntry .1.3.6.1.4.1.562.36.2.1.12.14.15 |
mscLpSonetStateEntryAn entry in the mscLpSonetStateTable. MscLpSonetStateEntry .1.3.6.1.4.1.562.36.2.1.12.14.15.1 |
mscLpSonetAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.15.1.1 |
mscLpSonetOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.15.1.2 |
mscLpSonetUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.15.1.3 |
mscLpSonetAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.14.15.1.4 |
mscLpSonetProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.14.15.1.5 |
mscLpSonetControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.14.15.1.6 |
mscLpSonetAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.14.15.1.7 |
mscLpSonetStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.15.1.8 |
mscLpSonetUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.15.1.9 |
mscLpSonetOperTableThis group contains the common operational data for Sonet or Sdh
component. SEQUENCE OF MscLpSonetOperEntry .1.3.6.1.4.1.562.36.2.1.12.14.16 |
mscLpSonetOperEntryAn entry in the mscLpSonetOperTable. MscLpSonetOperEntry .1.3.6.1.4.1.562.36.2.1.12.14.16.1 |
mscLpSonetLosAlarmThis attribute indicates whether a Loss Of Signal (LOS) alarm state
has been entered. An LOS alarm state is entered when LOS defects
have been observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds, or if an LOS defect is present when the criteria for
LOF failure declaration have been met. A LOS defect is declared
when 20+/-3 us of all-zeros pattern is detected. The LOS defect is
cleared when two valid framing words are detected and no Loss Of
Signal condition is detected during an interval of 20+/-3 us. If the
LOS defects are intermittently occurring, the LOS defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle.
The Sonet/Sdh component goes into an operational state of disabled
until the LOS alarm condition is cleared. The LOS alarm state is
cleared after LOS defects have been absent for a period of 10
seconds +/- 0.5 seconds.
The losAlarm attribute is always set to off when the component has
been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.16.1.1 |
mscLpSonetLofAlarmThis attribute displays whether a Loss Of Frame (LOF) alarm state
has been entered. An LOF alarm state is entered when LOF defects
have been observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds, except when an LOS defect or failure is present. An
LOF defect is detected when getting contiguous errored frame
alignment for at least 3 msec. If the LOF defects are intermittently
occurring, the LOF defect accumulator is decremented at a rate of
1/10 of the incrementing rate (alarm integration ratio of 1/10), with
all measurements based on a 200 ms polling cycle.
The Sonet/Sdh component goes into an operational state of disabled
until the LOF alarm condition is cleared. The condition is cleared
when framing has been achieved for a period of 10 seconds +/- 0.5
seconds.
The lofAlarm attribute is always set to off when the component has
been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.16.1.2 |
mscLpSonetRxAisAlarmThis attribute displays whether a Line Alarm Indication Signal (L-
AIS) alarm state has been entered. An L-AIS alarm state is entered
when L-AIS defects have been observed and accumulated for a
period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the
occurrence of the L-AIS signal in five contiguous STS (STM)
frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS
defects are intermittently occurring, the L-AIS defect accumulator
is decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The Sonet/Sdh component goes into an operational state of disabled
until the L-AIS alarm condition is cleared. The condition is cleared
after not detecting the L-AIS signal for a period of 10 seconds +/-
0.5 seconds.
The rxAisAlarm attribute is always set to off when the component
has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.16.1.3 |
mscLpSonetRxRfiAlarmThis attribute displays whether a Line Remote Failure Indication
(LRFI) alarm state has been entered. An L-RFI alarm state is
entered when Line Remote Failure Indication (L-RDI) defects have
been observed and accumulated for a period of 2.5 seconds +/- 0.5
seconds. The L-RDI defect is the occurrence of the L-RDI signal in
five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and
8 of the K2 bytes). If the L-RDI defects are intermittently occurring,
the L-RDI defect accumulator is decremented at a rate of 1/10 of
the incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The Sonet/Sdh component goes into an operational state of disabled
until the L-RFI alarm condition is cleared. The condition is cleared
after not detecting the L-RDI signal for a period of 10 seconds +/-
0.5 seconds.
The rxRfiAlarm attribute is always set to off when the component
has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.16.1.4 |
mscLpSonetTxAisThis attribute displays whether the Line Alarm Indication Signal (L-
AIS) signal is being transmitted on the outgoing line. This signal is
transmitted when the Sonet/Sdh is locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.16.1.5 |
mscLpSonetTxRdiThis attribute displays whether the Line Remote Defect Indicator
(L-RDI) signal is being transmitted over the OC-3 line. The L-RDI
signal is transmitted upon the detection of the LOS, LOF or L-AIS
defect. This attribute is always set to off when the component has
been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.16.1.6 |
mscLpSonetUnusableTxClockRefAlarmThis attribute displays whether an Unusable Transmit Clock
Reference (UTCR) alarm state has been entered. A UTCR alarm
state is entered when a Sonet/Sdh port provisioned to act as a
transmit clock reference has received the code 'do not use for
synchronization' in the S1 byte (in the SONET/ SDH line
overhead) for 2.5 +/- 0.5 seconds.
The condition is cleared after not detecting the 'do not use for
synchronization' code for a period of 10 +/- 0.5 seconds or when
the port is no longer provisioned to act as a transmit clock
reference.
A port is acting as a transmit clock reference if it is provisioned
with a) a clockingSource of line, or b) it has been provisioned as a
primaryReference, secondaryReference or tertiaryReference in the
NetworkSynchronization component.
The unusableTxClockRefAlarm attribute is always set to off when
the component has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.14.16.1.7 |
mscLpSonetStatsTableThis group contains the statistics data for a Sonet or Sdh
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpSonetStatsEntry .1.3.6.1.4.1.562.36.2.1.12.14.17 |
mscLpSonetStatsEntryAn entry in the mscLpSonetStatsTable. MscLpSonetStatsEntry .1.3.6.1.4.1.562.36.2.1.12.14.17.1 |
mscLpSonetRunningTimeThis attribute indicates the total number of seconds since the Sonet/
Sdh component has been activated and been in unlocked state. All
the other error counts that follow can be updated when this count is
active.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.1 |
mscLpSonetErrorFreeSecThis attribute indicates the number of seconds that the Sonet/Sdh
component has been in an near-end error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.2 |
mscLpSonetSectCodeViolationsThis attribute indicates the total number of Section Code Violations
(SCVs) detected. A SCV corresponds to section BIP-8 error. SCV
counting is inhibited for second intervals where a Section Severely
Errored Second (SSES) is counted. The count wraps at its
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.3 |
mscLpSonetSectErroredSecThis attribute indicates the total number of Section Errored Seconds
(SESs) that have been counted. A SES is declared for second
intervals containing one or more SCVs or one or more Loss Of
Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF
defect is the occurrence of 4 contiguous errored STS or STM frame
alignment words.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.4 |
mscLpSonetSectSevErroredSecThis attribute indicates the total number of Section Severely Errored
Seconds (SSESs) that have been counted. A SSES is declared for
second intervals containing more than x SCVs or one or more LOS
or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.5 |
mscLpSonetSectLosSecThis attribute indicates the total number of Section LOS Seconds
(SLOSSs) that have been counted. A SLOSS is declared for second
intervals containing one or more LOS defects.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.6 |
mscLpSonetSectSevErroredFrmSecThis attribute indicates the total number of Section Severely Errored
Frame Seconds (SSEFSs) that have been counted. A SSEFS is
declared for second intervals containing one or more SEF defects.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.7 |
mscLpSonetSectFailuresThis attribute indicates the total number of times that a section
failure (LOS or LOF failure) has been declared.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.8 |
mscLpSonetLineCodeViolationsThis attribute indicates the total number of Line Code Violations
(LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV
counting is inhibited for second intervals where a Line Severely
Errored Second (LSES) is counted. Counting of LCVs is also
inhibited over second intervals where a Line Unavailable Second
(LUAS) is counted. The count wraps at its maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.9 |
mscLpSonetLineErroredSecThis attribute indicates the total number of Line Errored Seconds
(LESs) that have been counted. A LES is declared for second
intervals containing one or more LCVs or one or more line AIS
defects. Counting of LES is inhibited over second intervals where a
LUAS is counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.10 |
mscLpSonetLineSevErroredSecThis attribute indicates the total number of Line Severely Errored
Seconds (LSESs) that have been counted. A LSES is declared for
second intervals containing more than x LCVs or one or more L-
AIS defects. The value of x is 154 for a 155 Mbits/sec interface.
Counting of LSES is inhibited over second intervals where a LUAS
is counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.11 |
mscLpSonetLineAisSecThis attribute indicates the total number of Line AIS Seconds
(LAISSs) that have been counted. A LAISS is declared for second
intervals containing one or more L-AIS defects. Counting of LAISS
is inhibited over second intervals where a LUAS is counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.12 |
mscLpSonetLineUnavailSecThis attribute indicates the total number of one second intervals for
which the STS line is unavailable. The STS line becomes
unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are
included in the unavailable time. Once unavailable, the STS line
becomes available at the onset of 10 contiguous seconds with no
LSES. The 10 seconds with no LSES are excluded from the
unavailable time. For second intervals where a Line Unavailable
Second (LUAS) is counted, counting of LCV, LES, LSES and
LAISS is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.13 |
mscLpSonetLineFailuresThis attribute indicates the total number of times that a line failure
(L-AIS failure) has been declared.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.14 |
mscLpSonetFarEndLineErrorFreeSecThis attribute indicates the number of seconds that the Sonet/Sdh
component has been in an far-end error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.15 |
mscLpSonetFarEndLineCodeViolationsThis attribute indicates the total number of line FEBE detected from
the incoming line. The counting of line FEBE is inhibited for
second intervals where a Far-End Line Severely Errored Second
(FELSES) is counted. Counting of FELCVs is also inhibited over
second intervals where a Far-End Line Unavailable Second
(FELUAS) is counted. The count wraps at its maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.16 |
mscLpSonetFarEndLineErroredSecThis attribute indicates the total number of Far-End Line Errored
Seconds (FELESs) that have been counted. A FELES is declared
for second intervals containing one or more Far-End Line CVs
(FELCVs) or one or more L-RDI defects. Counting of FELES is
inhibited over second intervals where a FELUAS is counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.17 |
mscLpSonetFarEndLineSevErroredSecThis attribute indicates the total number of Far-End Line Severely
Errored Seconds (FELSESs) that have been counted. A FELSES is
declared for second intervals containing more than x FELCVs or
one or more L-RDI defects. The value of x is 154 for a 155 Mbits/
sec interface. Counting of FELSES is inhibited over second
intervals where a FELUAS is counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.18 |
mscLpSonetFarEndLineAisSecThis attribute indicates the total number of Far-End Line AIS
Seconds (FELAISSs) that have been counted. A FELAISS is
declared for second intervals one or more L-RDI defects. Counting
of FELAISS is inhibited over second intervals where a FELUAS is
counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.19 |
mscLpSonetFarEndLineUnavailSecThis attribute indicates the total number of one second intervals for
which the STS far-end line is unavailable. The STS far-end line
becomes unavailable at the onset of 10 consecutive FELSESs. The
10 FELSESs are included in the unavailable time. Once unavailable,
the STS far-end line becomes available at the onset of 10
contiguous seconds with no FELSES. The 10 seconds with no
FELSES are excluded from the unavailable time. For second
intervals where a Far-End Line Unavailable Second (FELUAS) is
counted, counting of FELCV, FELES, FELSES and FELAISS is
inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.20 |
mscLpSonetFarEndLineFailuresThis attribute indicates the total number of times that a far-end line
failure (L-RFI failure) has been declared.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.14.17.1.21 |
mscLpSdh OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.15 |
mscLpSdhRowStatusTableThis entry controls the addition and deletion of
mscLpSdh components. SEQUENCE OF MscLpSdhRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.1 |
mscLpSdhRowStatusEntryA single entry in the table represents a single
mscLpSdh component. MscLpSdhRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.1.1 |
mscLpSdhRowStatusThis variable is used as the basis for SNMP naming of
mscLpSdh components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.1.1.1 |
mscLpSdhComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.1.1.2 |
mscLpSdhStorageTypeThis variable represents the storage type value for the
mscLpSdh tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.1.1.4 |
mscLpSdhIndexThis variable represents the index for the mscLpSdh tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.15.1.1.10 |
mscLpSdhPath OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.15.2 |
mscLpSdhPathRowStatusTableThis entry controls the addition and deletion of
mscLpSdhPath components. SEQUENCE OF MscLpSdhPathRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.1 |
mscLpSdhPathRowStatusEntryA single entry in the table represents a single
mscLpSdhPath component. MscLpSdhPathRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.1.1 |
mscLpSdhPathRowStatusThis variable is used as the basis for SNMP naming of
mscLpSdhPath components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.1 |
mscLpSdhPathComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.2 |
mscLpSdhPathStorageTypeThis variable represents the storage type value for the
mscLpSdhPath tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.4 |
mscLpSdhPathIndexThis variable represents the index for the mscLpSdhPath tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.10 |
mscLpSdhPathCell OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.15.2.2 |
mscLpSdhPathCellRowStatusTableThis entry controls the addition and deletion of
mscLpSdhPathCell components. SEQUENCE OF MscLpSdhPathCellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.2.1 |
mscLpSdhPathCellRowStatusEntryA single entry in the table represents a single
mscLpSdhPathCell component. MscLpSdhPathCellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1 |
mscLpSdhPathCellRowStatusThis variable is used as the basis for SNMP naming of
mscLpSdhPathCell components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.1 |
mscLpSdhPathCellComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.2 |
mscLpSdhPathCellStorageTypeThis variable represents the storage type value for the
mscLpSdhPathCell tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.4 |
mscLpSdhPathCellIndexThis variable represents the index for the mscLpSdhPathCell tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.10 |
mscLpSdhPathCellProvTableThis group contains the provisioning attributes for the AtmCell
component. SEQUENCE OF MscLpSdhPathCellProvEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.2.10 |
mscLpSdhPathCellProvEntryAn entry in the mscLpSdhPathCellProvTable. MscLpSdhPathCellProvEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1 |
mscLpSdhPathCellAlarmActDelayThis attribute defines the time during which a Loss of Cell
Delineation (LCD) defect should be observed before declaring an
LCD alarm (alarm 70115501). The time is specified in milliseconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.1 |
mscLpSdhPathCellScrambleCellPayloadCell scrambling, as defined by ITU-T Recommendation I.432., can
provide a solution to the problem of transmission equipment which
is sensitive to certain bit patterns in the ATM cell payload. This
attribute controls whether or not the cell payload is scrambled.
It defaults to off for DS1 interfaces, and on for all other interfaces.
Note that this setting must be the same at both ends of the link.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.2 |
mscLpSdhPathCellCorrectSingleBitHeaderErrorsThis attribute specifies whether the port corrects single bit errors
detected in the headers of received cells. If single bit errors are
corrected, the affected cells are passed up to the ATM layer
according to normal operation. If single bit errors are not corrected,
these errored cells are discarded by the physical layer. Note that
cells containing multiple bit errors in their headers are always
discarded.
Single bit HEC error correction must remain off for the following
card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm,
2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.3 |
mscLpSdhPathCellOperTableThis group contains the common operational attributes for the
AtmCell component. SEQUENCE OF MscLpSdhPathCellOperEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.2.11 |
mscLpSdhPathCellOperEntryAn entry in the mscLpSdhPathCellOperTable. MscLpSdhPathCellOperEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1 |
mscLpSdhPathCellLcdAlarmThis attribute displays whether the Loss of Cell Delineation (LCD)
failure alarm state has been entered. This state is entered when LCD
defects have been observed and accumulated for a period of time
specified through the alarmActDelay attribute.
In ATM cell direct mapping mode, an LCD defect occurs when Out
of Cell Delineation (OCD) anomaly persists for x milliseconds, and
disappears when the Out of Cell Delineation (OCD) is absent for x
msec. An OCD anomaly occurs when 7 consecutive incorrect HECs
have been detected. An OCD anomaly terminates when 6
consecutive correct HECs have been detected.
For an AtmCell component located under a DS3 or E3 component
with mapping = PLCP, the LCD defect is directly derived from the
PLCP LOF defect.
If LCD defects are intermittently occurring, the LCD defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle
The component under which is located the AtmCell component goes
into an operational state of disabled until the LCD alarm condition
is cleared. The condition is cleared after the LCD defect has not
been reported for a period of 10 seconds +/- 0.5 seconds.
The lcdAlarm attribute is always set to off when the parent of the
AtmCell component has been locked and left offline. This can also
happen when the Path or Channel component has been suspended
since its parent has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1.1 |
mscLpSdhPathCellStatsTableThis group contains the Statistics attribute for the AtmCell
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpSdhPathCellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.2.12 |
mscLpSdhPathCellStatsEntryAn entry in the mscLpSdhPathCellStatsTable. MscLpSdhPathCellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1 |
mscLpSdhPathCellUncorrectableHecErrorsThis attribute indicates the number of uncorrectable ATM cell
header errors that have been detected. Counting of
uncorrectableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detected.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.1 |
mscLpSdhPathCellSevErroredSecThis attribute indicates the total number of ATM Cell Severely
Errored Seconds (SESs) that have been counted.
In direct mapping mode, an ATM Cell SES is declared for second
intervals containing one or more Out of Cell Delineation (OCD)
defects. An OCD defect occurs when seven consecutive incorrect
HECs have been detected. An OCD defect terminates when six
consecutive correct HECs have been detected.
In PLCP mapping mode, an ATM Cell SES is declared for second
intervals containing one or more PLCP LOF defects.
Counting of uncorrectableHeaderErrors (ucErr) and
correctableHeaderErrors (cErr) is inhibited when the OCD defect
is present.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.2 |
mscLpSdhPathCellReceiveCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
received on the link to the nominal link capacity. The utilization is
calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.3 |
mscLpSdhPathCellTransmitCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
transmitted on the link to the nominal link capacity. The utilization
is calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.4 |
mscLpSdhPathCellCorrectableHeaderErrorsThis attribute indicates the number of correctable ATM cell header
errors that have been detected and corrected. Counting of
correctableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detectedro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.5 |
mscLpSdhPathProvTableThis group contains all of the provisioning data for a Sonet/Sdh
Path component. SEQUENCE OF MscLpSdhPathProvEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.10 |
mscLpSdhPathProvEntryAn entry in the mscLpSdhPathProvTable. MscLpSdhPathProvEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.10.1 |
mscLpSdhPathApplicationFramerNameThis attribute defines the link to the software stack. It defines which
application is running on top of the Path component.rw Link .1.3.6.1.4.1.562.36.2.1.12.15.2.10.1.1 |
mscLpSdhPathCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpSdhPathCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.11 |
mscLpSdhPathCidDataEntryAn entry in the mscLpSdhPathCidDataTable. MscLpSdhPathCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.11.1 |
mscLpSdhPathCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.15.2.11.1.1 |
mscLpSdhPathStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpSdhPathStateEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.12 |
mscLpSdhPathStateEntryAn entry in the mscLpSdhPathStateTable. MscLpSdhPathStateEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.12.1 |
mscLpSdhPathAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.1 |
mscLpSdhPathOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.2 |
mscLpSdhPathUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.3 |
mscLpSdhPathAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.4 |
mscLpSdhPathProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.5 |
mscLpSdhPathControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.6 |
mscLpSdhPathAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.7 |
mscLpSdhPathStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.8 |
mscLpSdhPathUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.9 |
mscLpSdhPathIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpSdhPathIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.13 |
mscLpSdhPathIfEntryEntryAn entry in the mscLpSdhPathIfEntryTable. MscLpSdhPathIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.13.1 |
mscLpSdhPathIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.1 |
mscLpSdhPathIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.2 |
mscLpSdhPathOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpSdhPathOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.14 |
mscLpSdhPathOperStatusEntryAn entry in the mscLpSdhPathOperStatusTable. MscLpSdhPathOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.14.1 |
mscLpSdhPathSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.14.1.1 |
mscLpSdhPathOperTableThis group contains the common operational data for Path
component. SEQUENCE OF MscLpSdhPathOperEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.15 |
mscLpSdhPathOperEntryAn entry in the mscLpSdhPathOperTable. MscLpSdhPathOperEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.15.1 |
mscLpSdhPathLopAlarmThis attribute displays whether a Loss Of Pointer (LOP) alarm state
has been entered. An LOP alarm state is entered when LOP defects
have been observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds. An LOP defect occurs when no valid SPE or VC
pointer was received in 8 contiguous frames. If the LOP defects are
intermittently occurring, the LOP defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The Path component goes into an operational state of disabled until
the LOP alarm condition is cleared. The condition is cleared when
no more invalid pointer has been reported for 10 seconds +/- 0.5
seconds.
The lopAlarm attribute is always set to off when the Path
component has been locked and left offline by the operator or when
the Path component has been suspended since the parent component
has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.1 |
mscLpSdhPathRxAisAlarmThis attribute displays whether an Path Alarm Indication Signal (P-
AIS) alarm state has been entered. An P-AIS alarm state is entered
when P-AIS defects have been observed and accumulated for a
period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the
occurrence of the P-AIS signal in three contiguous valid STS or
STM frames (all one's in bytes H1 and H2). If the P-AIS defects are
intermittently occurring, the P-AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The Path component goes into an operational state of disabled until
the P-AIS alarm condition is cleared. The condition is cleared after
no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds.
The rxAisAlarm attribute is always set to off when the Path
component has been locked and left offline by the operator or when
the Path component has been suspended since the parent component
has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.2 |
mscLpSdhPathRxRfiAlarmThis attribute displays whether the Path Remote Failure Indication
(P-RFI) alarm state has been entered. An P-RFI alarm state is
entered when Path Remote Defect Indicator (P-RDI) defects have
been observed and accumulated for a period of 2.5 seconds +/- 0.5
seconds. The P-RDI defect is the occurrence of the P-RDI signal in
five contiguous valid STS or STM frames (bit 5 of the G1 byte set
to 1). If the P-RDI defects are intermittently occurring, the P-RDI
defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10)with all
measurements based on a 200 ms polling cycle.
The Path component goes into an operational state of disabled until
the P-RFI alarm condition is cleared. The condition is cleared after
no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds.
The rxRfiAlarm attribute is always set to off when the Path
component has been locked and left offline by the operator or when
the Path component has been suspended since the parent component
has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.3 |
mscLpSdhPathSignalLabelMismatchThis attribute displays whether the Path Signal Label Mismatch (P-
SLM) failure condition has been entered. An P-SLM failure
condition is entered when P-SLM defects have been observed and
accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM
defect occurs when detecting an unexpected path signal label. The
expected Path signal labels are 'Mapping for ATM' or 'Equipped -
Non Specific Payload'. If the P-SLM defects are intermittently
occurring, the P-SLM defect accumulator is decremented at a rate
of 1/10 of the incrementing rate (alarm integration ratio of 1/10),
with all measurements based on a 200 ms polling cycle.
The Path component goes into an operational state of disabled until
the Path Signal Label Mismatch failure condition is cleared. The
condition is cleared when an expected path signal label is received
for 10 seconds +/- 0.5 seconds.
The signalLabelMismatch attribute is always set to off when the
Path component has been locked and left offline by the operator or
when the Path component has been suspended since the parent
component has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.4 |
mscLpSdhPathTxAisThis attribute displays whether the Path Alarm Indication Signal (P-
AIS) signal is being transmitted on the path. The P-AIS signal is
transmitted when the Path component has been locked and left
offline by the operator or when the Path component has been
suspended since the parent component has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.5 |
mscLpSdhPathTxRdiThis attribute displays whether the Path Remote Defect Indicator
(P-RDI) signal is being transmitted over the path signal. The P-RDI
signal is transmitted over the outgoing line upon detection of LOP,
P-AIS or the occurrence of the LCD state. This attribute is always
set to off when the Path component has been locked and left offline
by the operator or when the Path component has been suspended
since the parent component has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.6 |
mscLpSdhPathStatsTableThis group contains the statistics data for a Sonet/Sdh Path
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpSdhPathStatsEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.16 |
mscLpSdhPathStatsEntryAn entry in the mscLpSdhPathStatsTable. MscLpSdhPathStatsEntry .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1 |
mscLpSdhPathPathErrorFreeSecThis attribute indicates the number of seconds that the Sonet/Sdh
Path component has been in an near-end error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.1 |
mscLpSdhPathPathCodeViolationsThis attribute indicates the total number of Path Code Violations
(PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV
counting is inhibited over second intervals where a Path Severely
Errored Second (PSES) is counted. Counting of PCVs is also
inhibited over second intervals where a Path Unavailable Second
(PUAS) is counted. The count wraps at its maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.2 |
mscLpSdhPathPathErroredSecThis attribute indicates the total number of Path Errored Seconds
(PESs) that have been counted. A PES is declared for second
intervals containing one or more PCVs or one or more LOP or path
AIS defects. Counting of PES is inhibited when PUAS is counted
over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.3 |
mscLpSdhPathPathSevErroredSecThis attribute indicates the total number of Path Severely Errored
Seconds (PSESs) that have been counted. A PSES is declared for
second intervals containing more than x PCVs or one or more LOP
or path AIS defects. The value of x is 2400 for a 155 Mbits/sec
interface. Counting of PSES is inhibited when PUAS is counted
over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.4 |
mscLpSdhPathPathAisLopSecThis attribute indicates the total number of path AIS and LOP
Seconds (PALSs). A PALS is declared for second intervals
containing one or more path AIS or LOP defects. Counting of PALS
is inhibited when PUAS is counted over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.5 |
mscLpSdhPathPathUnavailSecThis attribute indicates the total number of one second intervals for
which the STS/STM path is unavailable. The path becomes
unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are
included in the unavailable time. Once unavailable, the path
becomes available at the onset of 10 contiguous seconds with no
PSES. The 10 seconds with no PSES are excluded from the
unavailable time. For second intervals where a Path Unavailable
Second (PUAS) is counted, counting of PCV, PES, PSES and PALS
is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.6 |
mscLpSdhPathPathFailuresThis attribute indicates the total number of times that a path failure
(LOP, P-AIS or Path Signal Label Mismatch failure) has been
declared.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.7 |
mscLpSdhPathFarEndPathErrorFreeSecThis attribute indicates the number of seconds that the Sonet/Sdh
Path component has been in an far-end error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.8 |
mscLpSdhPathFarEndPathCodeViolationsThis attribute indicates the total number of Far-End Path Code
Violations (FEPCVs) detected. Each FEPCV corresponds to a path
FEBE. FEPCV counting is inhibited over second intervals where a
Far-End Path Severely Errored Second (FEPSES) is counted.
Counting of PCVs is also inhibited over second intervals where a
Far-End Path Unavailable Second (FEPUAS) is counted. The count
wraps at its maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.9 |
mscLpSdhPathFarEndPathErroredSecThis attribute indicates the total number of Far-End Path Errored
Seconds (FEPESs) that have been counted. A FEPES is declared for
second intervals containing one or more FEPCVs or one or more
path RDI (P-RDI) defects. Counting of FEPES is inhibited when
FEPUAS is counted over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.10 |
mscLpSdhPathFarEndPathSevErroredSecThis attribute indicates the total number of Far-End Path Severely
Errored Seconds (FEPSESs) that have been counted. A FEPSES is
declared for second intervals containing more than x FEPCVs or
one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/
sec interface. Counting of FEPSESs is inhibited when FEPUAS is
counted over the monitored second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.11 |
mscLpSdhPathFarEndPathAisLopSecThis attribute indicates the total number of Far-End Path AIS and
LOP Seconds (FEPALSs). A FEPALS is declared for second
intervals containing one or more P-RDI defects. Counting of
FEPALS is inhibited when FEPUAS is counted over the monitored
second.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.12 |
mscLpSdhPathFarEndPathUnavailSecThis attribute indicates the total number of one second intervals for
which the STS/STM far-end path is unavailable. The far-end path
becomes unavailable at the onset of 10 consecutive FEPSESs. The
10 FEPSESs are included in the unavailable time. Once unavailable,
the far-end path becomes available at the onset of 10 contiguous
seconds with no FEPSES. The 10 seconds with no FEPSES are
excluded from the unavailable time. For second intervals where a
Far-End Path Unavailable Second (FEPUAS) is counted, counting
of FEPCV, FEPES, FEPSES and FEPALS is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.13 |
mscLpSdhPathFarEndPathFailuresThis attribute indicates the total number of times that a STS/STM
far-end path failure (P-RFI failure) has been declared.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.14 |
mscLpSdhTest OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.15.3 |
mscLpSdhTestRowStatusTableThis entry controls the addition and deletion of
mscLpSdhTest components. SEQUENCE OF MscLpSdhTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.3.1 |
mscLpSdhTestRowStatusEntryA single entry in the table represents a single
mscLpSdhTest component. MscLpSdhTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.3.1.1 |
mscLpSdhTestRowStatusThis variable is used as the basis for SNMP naming of
mscLpSdhTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.1 |
mscLpSdhTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.2 |
mscLpSdhTestStorageTypeThis variable represents the storage type value for the
mscLpSdhTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.4 |
mscLpSdhTestIndexThis variable represents the index for the mscLpSdhTest tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.10 |
mscLpSdhTestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpSdhTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.15.3.10 |
mscLpSdhTestStateEntryAn entry in the mscLpSdhTestStateTable. MscLpSdhTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.15.3.10.1 |
mscLpSdhTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.1 |
mscLpSdhTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.2 |
mscLpSdhTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.3 |
mscLpSdhTestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpSdhTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.15.3.11 |
mscLpSdhTestSetupEntryAn entry in the mscLpSdhTestSetupTable. MscLpSdhTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.15.3.11.1 |
mscLpSdhTestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.1 |
mscLpSdhTestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.2 |
mscLpSdhTestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.3 |
mscLpSdhTestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.4 |
mscLpSdhTestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.5 |
mscLpSdhTestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.6 |
mscLpSdhTestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.7 |
mscLpSdhTestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.8 |
mscLpSdhTestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpSdhTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.15.3.12 |
mscLpSdhTestResultsEntryAn entry in the mscLpSdhTestResultsTable. MscLpSdhTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1 |
mscLpSdhTestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.1 |
mscLpSdhTestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.2 |
mscLpSdhTestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.3 |
mscLpSdhTestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.4 |
mscLpSdhTestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.5 |
mscLpSdhTestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.6 |
mscLpSdhTestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.7 |
mscLpSdhTestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.8 |
mscLpSdhTestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.9 |
mscLpSdhTestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.10 |
mscLpSdhTestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.11 |
mscLpSdhProvTableThis group contains all of the provisioning data for a Sonet or Sdh
component. SEQUENCE OF MscLpSdhProvEntry .1.3.6.1.4.1.562.36.2.1.12.15.10 |
mscLpSdhProvEntryAn entry in the mscLpSdhProvTable. MscLpSdhProvEntry .1.3.6.1.4.1.562.36.2.1.12.15.10.1 |
mscLpSdhClockingSourceThis attribute defines the type of clocking source used for
synchronizing the OC-3 transmit clock: local means direct use of
the local clock oscillator at its centre frequency; line means the use
of a signal phase-locked to the incoming OC-3 line rate; module
means the use of a signal phase-locked to the CP reference clock.
When adding a Sonet/Sdh component, the clockingSource attribute
is set to module if the NetworkSynchronization component has
been added and is set to local otherwise.
Note that the multiport OC-3 cell-based cards has one common
clock source for each of the three ports when either the clocking
source local or module is selected. For this reason, it is not allowed
to have at the same time the clockingSource attribute set to local on
one port and module on another port. Furthermore, the
clockingSource attribute cannot be set to module if the
NetworkSynchronization component has not been added.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.10.1.1 |
mscLpSdhCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpSdhCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.15.11 |
mscLpSdhCidDataEntryAn entry in the mscLpSdhCidDataTable. MscLpSdhCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.15.11.1 |
mscLpSdhCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.15.11.1.1 |
mscLpSdhAdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpSdhAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.15.12 |
mscLpSdhAdminInfoEntryAn entry in the mscLpSdhAdminInfoTable. MscLpSdhAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.15.12.1 |
mscLpSdhVendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.15.12.1.1 |
mscLpSdhCommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.15.12.1.2 |
mscLpSdhIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpSdhIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.15.13 |
mscLpSdhIfEntryEntryAn entry in the mscLpSdhIfEntryTable. MscLpSdhIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.15.13.1 |
mscLpSdhIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.13.1.1 |
mscLpSdhIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.15.13.1.2 |
mscLpSdhOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpSdhOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.14 |
mscLpSdhOperStatusEntryAn entry in the mscLpSdhOperStatusTable. MscLpSdhOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.15.14.1 |
mscLpSdhSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.14.1.1 |
mscLpSdhStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpSdhStateEntry .1.3.6.1.4.1.562.36.2.1.12.15.15 |
mscLpSdhStateEntryAn entry in the mscLpSdhStateTable. MscLpSdhStateEntry .1.3.6.1.4.1.562.36.2.1.12.15.15.1 |
mscLpSdhAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.15.1.1 |
mscLpSdhOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.15.1.2 |
mscLpSdhUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.15.1.3 |
mscLpSdhAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.15.15.1.4 |
mscLpSdhProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.15.15.1.5 |
mscLpSdhControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.15.15.1.6 |
mscLpSdhAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.15.15.1.7 |
mscLpSdhStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.15.1.8 |
mscLpSdhUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.15.1.9 |
mscLpSdhOperTableThis group contains the common operational data for Sonet or Sdh
component. SEQUENCE OF MscLpSdhOperEntry .1.3.6.1.4.1.562.36.2.1.12.15.16 |
mscLpSdhOperEntryAn entry in the mscLpSdhOperTable. MscLpSdhOperEntry .1.3.6.1.4.1.562.36.2.1.12.15.16.1 |
mscLpSdhLosAlarmThis attribute indicates whether a Loss Of Signal (LOS) alarm state
has been entered. An LOS alarm state is entered when LOS defects
have been observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds, or if an LOS defect is present when the criteria for
LOF failure declaration have been met. A LOS defect is declared
when 20+/-3 us of all-zeros pattern is detected. The LOS defect is
cleared when two valid framing words are detected and no Loss Of
Signal condition is detected during an interval of 20+/-3 us. If the
LOS defects are intermittently occurring, the LOS defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle.
The Sonet/Sdh component goes into an operational state of disabled
until the LOS alarm condition is cleared. The LOS alarm state is
cleared after LOS defects have been absent for a period of 10
seconds +/- 0.5 seconds.
The losAlarm attribute is always set to off when the component has
been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.16.1.1 |
mscLpSdhLofAlarmThis attribute displays whether a Loss Of Frame (LOF) alarm state
has been entered. An LOF alarm state is entered when LOF defects
have been observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds, except when an LOS defect or failure is present. An
LOF defect is detected when getting contiguous errored frame
alignment for at least 3 msec. If the LOF defects are intermittently
occurring, the LOF defect accumulator is decremented at a rate of
1/10 of the incrementing rate (alarm integration ratio of 1/10), with
all measurements based on a 200 ms polling cycle.
The Sonet/Sdh component goes into an operational state of disabled
until the LOF alarm condition is cleared. The condition is cleared
when framing has been achieved for a period of 10 seconds +/- 0.5
seconds.
The lofAlarm attribute is always set to off when the component has
been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.16.1.2 |
mscLpSdhRxAisAlarmThis attribute displays whether a Line Alarm Indication Signal (L-
AIS) alarm state has been entered. An L-AIS alarm state is entered
when L-AIS defects have been observed and accumulated for a
period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the
occurrence of the L-AIS signal in five contiguous STS (STM)
frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS
defects are intermittently occurring, the L-AIS defect accumulator
is decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The Sonet/Sdh component goes into an operational state of disabled
until the L-AIS alarm condition is cleared. The condition is cleared
after not detecting the L-AIS signal for a period of 10 seconds +/-
0.5 seconds.
The rxAisAlarm attribute is always set to off when the component
has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.16.1.3 |
mscLpSdhRxRfiAlarmThis attribute displays whether a Line Remote Failure Indication
(LRFI) alarm state has been entered. An L-RFI alarm state is
entered when Line Remote Failure Indication (L-RDI) defects have
been observed and accumulated for a period of 2.5 seconds +/- 0.5
seconds. The L-RDI defect is the occurrence of the L-RDI signal in
five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and
8 of the K2 bytes). If the L-RDI defects are intermittently occurring,
the L-RDI defect accumulator is decremented at a rate of 1/10 of
the incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The Sonet/Sdh component goes into an operational state of disabled
until the L-RFI alarm condition is cleared. The condition is cleared
after not detecting the L-RDI signal for a period of 10 seconds +/-
0.5 seconds.
The rxRfiAlarm attribute is always set to off when the component
has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.16.1.4 |
mscLpSdhTxAisThis attribute displays whether the Line Alarm Indication Signal (L-
AIS) signal is being transmitted on the outgoing line. This signal is
transmitted when the Sonet/Sdh is locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.16.1.5 |
mscLpSdhTxRdiThis attribute displays whether the Line Remote Defect Indicator
(L-RDI) signal is being transmitted over the OC-3 line. The L-RDI
signal is transmitted upon the detection of the LOS, LOF or L-AIS
defect. This attribute is always set to off when the component has
been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.16.1.6 |
mscLpSdhUnusableTxClockRefAlarmThis attribute displays whether an Unusable Transmit Clock
Reference (UTCR) alarm state has been entered. A UTCR alarm
state is entered when a Sonet/Sdh port provisioned to act as a
transmit clock reference has received the code 'do not use for
synchronization' in the S1 byte (in the SONET/ SDH line
overhead) for 2.5 +/- 0.5 seconds.
The condition is cleared after not detecting the 'do not use for
synchronization' code for a period of 10 +/- 0.5 seconds or when
the port is no longer provisioned to act as a transmit clock
reference.
A port is acting as a transmit clock reference if it is provisioned
with a) a clockingSource of line, or b) it has been provisioned as a
primaryReference, secondaryReference or tertiaryReference in the
NetworkSynchronization component.
The unusableTxClockRefAlarm attribute is always set to off when
the component has been locked and left offline.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.15.16.1.7 |
mscLpSdhStatsTableThis group contains the statistics data for a Sonet or Sdh
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpSdhStatsEntry .1.3.6.1.4.1.562.36.2.1.12.15.17 |
mscLpSdhStatsEntryAn entry in the mscLpSdhStatsTable. MscLpSdhStatsEntry .1.3.6.1.4.1.562.36.2.1.12.15.17.1 |
mscLpSdhRunningTimeThis attribute indicates the total number of seconds since the Sonet/
Sdh component has been activated and been in unlocked state. All
the other error counts that follow can be updated when this count is
active.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.1 |
mscLpSdhErrorFreeSecThis attribute indicates the number of seconds that the Sonet/Sdh
component has been in an near-end error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.2 |
mscLpSdhSectCodeViolationsThis attribute indicates the total number of Section Code Violations
(SCVs) detected. A SCV corresponds to section BIP-8 error. SCV
counting is inhibited for second intervals where a Section Severely
Errored Second (SSES) is counted. The count wraps at its
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.3 |
mscLpSdhSectErroredSecThis attribute indicates the total number of Section Errored Seconds
(SESs) that have been counted. A SES is declared for second
intervals containing one or more SCVs or one or more Loss Of
Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF
defect is the occurrence of 4 contiguous errored STS or STM frame
alignment words.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.4 |
mscLpSdhSectSevErroredSecThis attribute indicates the total number of Section Severely Errored
Seconds (SSESs) that have been counted. A SSES is declared for
second intervals containing more than x SCVs or one or more LOS
or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.5 |
mscLpSdhSectLosSecThis attribute indicates the total number of Section LOS Seconds
(SLOSSs) that have been counted. A SLOSS is declared for second
intervals containing one or more LOS defects.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.6 |
mscLpSdhSectSevErroredFrmSecThis attribute indicates the total number of Section Severely Errored
Frame Seconds (SSEFSs) that have been counted. A SSEFS is
declared for second intervals containing one or more SEF defects.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.7 |
mscLpSdhSectFailuresThis attribute indicates the total number of times that a section
failure (LOS or LOF failure) has been declared.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.8 |
mscLpSdhLineCodeViolationsThis attribute indicates the total number of Line Code Violations
(LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV
counting is inhibited for second intervals where a Line Severely
Errored Second (LSES) is counted. Counting of LCVs is also
inhibited over second intervals where a Line Unavailable Second
(LUAS) is counted. The count wraps at its maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.9 |
mscLpSdhLineErroredSecThis attribute indicates the total number of Line Errored Seconds
(LESs) that have been counted. A LES is declared for second
intervals containing one or more LCVs or one or more line AIS
defects. Counting of LES is inhibited over second intervals where a
LUAS is counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.10 |
mscLpSdhLineSevErroredSecThis attribute indicates the total number of Line Severely Errored
Seconds (LSESs) that have been counted. A LSES is declared for
second intervals containing more than x LCVs or one or more L-
AIS defects. The value of x is 154 for a 155 Mbits/sec interface.
Counting of LSES is inhibited over second intervals where a LUAS
is counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.11 |
mscLpSdhLineAisSecThis attribute indicates the total number of Line AIS Seconds
(LAISSs) that have been counted. A LAISS is declared for second
intervals containing one or more L-AIS defects. Counting of LAISS
is inhibited over second intervals where a LUAS is counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.12 |
mscLpSdhLineUnavailSecThis attribute indicates the total number of one second intervals for
which the STS line is unavailable. The STS line becomes
unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are
included in the unavailable time. Once unavailable, the STS line
becomes available at the onset of 10 contiguous seconds with no
LSES. The 10 seconds with no LSES are excluded from the
unavailable time. For second intervals where a Line Unavailable
Second (LUAS) is counted, counting of LCV, LES, LSES and
LAISS is inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.13 |
mscLpSdhLineFailuresThis attribute indicates the total number of times that a line failure
(L-AIS failure) has been declared.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.14 |
mscLpSdhFarEndLineErrorFreeSecThis attribute indicates the number of seconds that the Sonet/Sdh
component has been in an far-end error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.15 |
mscLpSdhFarEndLineCodeViolationsThis attribute indicates the total number of line FEBE detected from
the incoming line. The counting of line FEBE is inhibited for
second intervals where a Far-End Line Severely Errored Second
(FELSES) is counted. Counting of FELCVs is also inhibited over
second intervals where a Far-End Line Unavailable Second
(FELUAS) is counted. The count wraps at its maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.16 |
mscLpSdhFarEndLineErroredSecThis attribute indicates the total number of Far-End Line Errored
Seconds (FELESs) that have been counted. A FELES is declared
for second intervals containing one or more Far-End Line CVs
(FELCVs) or one or more L-RDI defects. Counting of FELES is
inhibited over second intervals where a FELUAS is counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.17 |
mscLpSdhFarEndLineSevErroredSecThis attribute indicates the total number of Far-End Line Severely
Errored Seconds (FELSESs) that have been counted. A FELSES is
declared for second intervals containing more than x FELCVs or
one or more L-RDI defects. The value of x is 154 for a 155 Mbits/
sec interface. Counting of FELSES is inhibited over second
intervals where a FELUAS is counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.18 |
mscLpSdhFarEndLineAisSecThis attribute indicates the total number of Far-End Line AIS
Seconds (FELAISSs) that have been counted. A FELAISS is
declared for second intervals one or more L-RDI defects. Counting
of FELAISS is inhibited over second intervals where a FELUAS is
counted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.19 |
mscLpSdhFarEndLineUnavailSecThis attribute indicates the total number of one second intervals for
which the STS far-end line is unavailable. The STS far-end line
becomes unavailable at the onset of 10 consecutive FELSESs. The
10 FELSESs are included in the unavailable time. Once unavailable,
the STS far-end line becomes available at the onset of 10
contiguous seconds with no FELSES. The 10 seconds with no
FELSES are excluded from the unavailable time. For second
intervals where a Far-End Line Unavailable Second (FELUAS) is
counted, counting of FELCV, FELES, FELSES and FELAISS is
inhibited.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.20 |
mscLpSdhFarEndLineFailuresThis attribute indicates the total number of times that a far-end line
failure (L-RFI failure) has been declared.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.15.17.1.21 |
mscLpJT2 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.16 |
mscLpJT2RowStatusTableThis entry controls the addition and deletion of
mscLpJT2 components. SEQUENCE OF MscLpJT2RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.16.1 |
mscLpJT2RowStatusEntryA single entry in the table represents a single
mscLpJT2 component. MscLpJT2RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.16.1.1 |
mscLpJT2RowStatusThis variable is used as the basis for SNMP naming of
mscLpJT2 components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.16.1.1.1 |
mscLpJT2ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.16.1.1.2 |
mscLpJT2StorageTypeThis variable represents the storage type value for the
mscLpJT2 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.16.1.1.4 |
mscLpJT2IndexThis variable represents the index for the mscLpJT2 tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.16.1.1.10 |
mscLpJT2Test OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.16.2 |
mscLpJT2TestRowStatusTableThis entry controls the addition and deletion of
mscLpJT2Test components. SEQUENCE OF MscLpJT2TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.16.2.1 |
mscLpJT2TestRowStatusEntryA single entry in the table represents a single
mscLpJT2Test component. MscLpJT2TestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.16.2.1.1 |
mscLpJT2TestRowStatusThis variable is used as the basis for SNMP naming of
mscLpJT2Test components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.1 |
mscLpJT2TestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.2 |
mscLpJT2TestStorageTypeThis variable represents the storage type value for the
mscLpJT2Test tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.4 |
mscLpJT2TestIndexThis variable represents the index for the mscLpJT2Test tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.10 |
mscLpJT2TestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpJT2TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.16.2.10 |
mscLpJT2TestStateEntryAn entry in the mscLpJT2TestStateTable. MscLpJT2TestStateEntry .1.3.6.1.4.1.562.36.2.1.12.16.2.10.1 |
mscLpJT2TestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.1 |
mscLpJT2TestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.2 |
mscLpJT2TestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.3 |
mscLpJT2TestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpJT2TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.16.2.11 |
mscLpJT2TestSetupEntryAn entry in the mscLpJT2TestSetupTable. MscLpJT2TestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.16.2.11.1 |
mscLpJT2TestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.1 |
mscLpJT2TestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.2 |
mscLpJT2TestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.3 |
mscLpJT2TestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.4 |
mscLpJT2TestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.5 |
mscLpJT2TestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.6 |
mscLpJT2TestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.7 |
mscLpJT2TestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.8 |
mscLpJT2TestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpJT2TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.16.2.12 |
mscLpJT2TestResultsEntryAn entry in the mscLpJT2TestResultsTable. MscLpJT2TestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1 |
mscLpJT2TestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.1 |
mscLpJT2TestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.2 |
mscLpJT2TestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.3 |
mscLpJT2TestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.4 |
mscLpJT2TestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.5 |
mscLpJT2TestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.6 |
mscLpJT2TestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.7 |
mscLpJT2TestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.8 |
mscLpJT2TestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.9 |
mscLpJT2TestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.10 |
mscLpJT2TestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.11 |
mscLpJT2Cell OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.16.3 |
mscLpJT2CellRowStatusTableThis entry controls the addition and deletion of
mscLpJT2Cell components. SEQUENCE OF MscLpJT2CellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.16.3.1 |
mscLpJT2CellRowStatusEntryA single entry in the table represents a single
mscLpJT2Cell component. MscLpJT2CellRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.16.3.1.1 |
mscLpJT2CellRowStatusThis variable is used as the basis for SNMP naming of
mscLpJT2Cell components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.1 |
mscLpJT2CellComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.2 |
mscLpJT2CellStorageTypeThis variable represents the storage type value for the
mscLpJT2Cell tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.4 |
mscLpJT2CellIndexThis variable represents the index for the mscLpJT2Cell tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.10 |
mscLpJT2CellProvTableThis group contains the provisioning attributes for the AtmCell
component. SEQUENCE OF MscLpJT2CellProvEntry .1.3.6.1.4.1.562.36.2.1.12.16.3.10 |
mscLpJT2CellProvEntryAn entry in the mscLpJT2CellProvTable. MscLpJT2CellProvEntry .1.3.6.1.4.1.562.36.2.1.12.16.3.10.1 |
mscLpJT2CellAlarmActDelayThis attribute defines the time during which a Loss of Cell
Delineation (LCD) defect should be observed before declaring an
LCD alarm (alarm 70115501). The time is specified in milliseconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.1 |
mscLpJT2CellScrambleCellPayloadCell scrambling, as defined by ITU-T Recommendation I.432., can
provide a solution to the problem of transmission equipment which
is sensitive to certain bit patterns in the ATM cell payload. This
attribute controls whether or not the cell payload is scrambled.
It defaults to off for DS1 interfaces, and on for all other interfaces.
Note that this setting must be the same at both ends of the link.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.2 |
mscLpJT2CellCorrectSingleBitHeaderErrorsThis attribute specifies whether the port corrects single bit errors
detected in the headers of received cells. If single bit errors are
corrected, the affected cells are passed up to the ATM layer
according to normal operation. If single bit errors are not corrected,
these errored cells are discarded by the physical layer. Note that
cells containing multiple bit errors in their headers are always
discarded.
Single bit HEC error correction must remain off for the following
card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm,
2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.3 |
mscLpJT2CellOperTableThis group contains the common operational attributes for the
AtmCell component. SEQUENCE OF MscLpJT2CellOperEntry .1.3.6.1.4.1.562.36.2.1.12.16.3.11 |
mscLpJT2CellOperEntryAn entry in the mscLpJT2CellOperTable. MscLpJT2CellOperEntry .1.3.6.1.4.1.562.36.2.1.12.16.3.11.1 |
mscLpJT2CellLcdAlarmThis attribute displays whether the Loss of Cell Delineation (LCD)
failure alarm state has been entered. This state is entered when LCD
defects have been observed and accumulated for a period of time
specified through the alarmActDelay attribute.
In ATM cell direct mapping mode, an LCD defect occurs when Out
of Cell Delineation (OCD) anomaly persists for x milliseconds, and
disappears when the Out of Cell Delineation (OCD) is absent for x
msec. An OCD anomaly occurs when 7 consecutive incorrect HECs
have been detected. An OCD anomaly terminates when 6
consecutive correct HECs have been detected.
For an AtmCell component located under a DS3 or E3 component
with mapping = PLCP, the LCD defect is directly derived from the
PLCP LOF defect.
If LCD defects are intermittently occurring, the LCD defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle
The component under which is located the AtmCell component goes
into an operational state of disabled until the LCD alarm condition
is cleared. The condition is cleared after the LCD defect has not
been reported for a period of 10 seconds +/- 0.5 seconds.
The lcdAlarm attribute is always set to off when the parent of the
AtmCell component has been locked and left offline. This can also
happen when the Path or Channel component has been suspended
since its parent has been locked.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.3.11.1.1 |
mscLpJT2CellStatsTableThis group contains the Statistics attribute for the AtmCell
component. Each attribute type is a non-negative integer which
monotonically increases until it reaches a maximum value, at which
point it wraps around and starts increasing again from zero. SEQUENCE OF MscLpJT2CellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.16.3.12 |
mscLpJT2CellStatsEntryAn entry in the mscLpJT2CellStatsTable. MscLpJT2CellStatsEntry .1.3.6.1.4.1.562.36.2.1.12.16.3.12.1 |
mscLpJT2CellUncorrectableHecErrorsThis attribute indicates the number of uncorrectable ATM cell
header errors that have been detected. Counting of
uncorrectableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detected.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.1 |
mscLpJT2CellSevErroredSecThis attribute indicates the total number of ATM Cell Severely
Errored Seconds (SESs) that have been counted.
In direct mapping mode, an ATM Cell SES is declared for second
intervals containing one or more Out of Cell Delineation (OCD)
defects. An OCD defect occurs when seven consecutive incorrect
HECs have been detected. An OCD defect terminates when six
consecutive correct HECs have been detected.
In PLCP mapping mode, an ATM Cell SES is declared for second
intervals containing one or more PLCP LOF defects.
Counting of uncorrectableHeaderErrors (ucErr) and
correctableHeaderErrors (cErr) is inhibited when the OCD defect
is present.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.2 |
mscLpJT2CellReceiveCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
received on the link to the nominal link capacity. The utilization is
calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.3 |
mscLpJT2CellTransmitCellUtilizationThis attribute is the ratio of the number of valid, assigned cells
transmitted on the link to the nominal link capacity. The utilization
is calculated over a period of one minute.
This attribute is always set to 0 when the parent of the AtmCell
component has been locked and left offline. This can also happen
when the Path or Channel component has been suspended since its
parent has been locked.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.4 |
mscLpJT2CellCorrectableHeaderErrorsThis attribute indicates the number of correctable ATM cell header
errors that have been detected and corrected. Counting of
correctableHeaderErrors is inhibited when an Out of Cell
Delineation (OCD) defect is present. An OCD defect occurs when
seven consecutive incorrect HECs have been detected. An OCD
defect terminates when six consecutive correct HECs have been
detectedro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.5 |
mscLpJT2CidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpJT2CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.16.10 |
mscLpJT2CidDataEntryAn entry in the mscLpJT2CidDataTable. MscLpJT2CidDataEntry .1.3.6.1.4.1.562.36.2.1.12.16.10.1 |
mscLpJT2CustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.16.10.1.1 |
mscLpJT2ProvTableThis group contains all of the JT2 specific provisioning data for a
JT2 component. SEQUENCE OF MscLpJT2ProvEntry .1.3.6.1.4.1.562.36.2.1.12.16.11 |
mscLpJT2ProvEntryAn entry in the mscLpJT2ProvTable. MscLpJT2ProvEntry .1.3.6.1.4.1.562.36.2.1.12.16.11.1 |
mscLpJT2ClockingSourceThis attribute defines the source of the transmit clock for the JT2
line.
When the clocking source is selected from local, the oscillator on
the port generates the clocking for the line.
When the clocking source is selected from line, the port
synchronizes to the clock recovered from the incoming line signal.
When the clocking source is selected from module, the port's clock
synchronizes to the clock provided by the oscillator on the active
CP.
Note:- that when one port is set to local, the other port must also be
set to local, and when one port is set to module, the other port must
also be set to module. If one of the ports is set to line, the other port
must be set to otherPort.
Also, if a CP reference clock is available when the JT2 component
is added, the clocking source defaults to module, whereas if a CP
reference clock is not available when the component is added, the
clocking source defaults to local.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.11.1.1 |
mscLpJT2LineLengthThis attribute defines the line length for equalization calculations
for the JT2 line. The range is between 0 and 480 feet (1 metre =
3.28 feet).rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.16.11.1.2 |
mscLpJT2ApplicationFramerNameThis attribute defines the link to the software stack. It defines which
application is running on top of the JT2 component.rw Link .1.3.6.1.4.1.562.36.2.1.12.16.11.1.3 |
mscLpJT2IfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpJT2IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.16.12 |
mscLpJT2IfEntryEntryAn entry in the mscLpJT2IfEntryTable. MscLpJT2IfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.16.12.1 |
mscLpJT2IfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.12.1.1 |
mscLpJT2IfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.16.12.1.2 |
mscLpJT2OperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpJT2OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.16.13 |
mscLpJT2OperStatusEntryAn entry in the mscLpJT2OperStatusTable. MscLpJT2OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.16.13.1 |
mscLpJT2SnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.13.1.1 |
mscLpJT2StateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpJT2StateEntry .1.3.6.1.4.1.562.36.2.1.12.16.14 |
mscLpJT2StateEntryAn entry in the mscLpJT2StateTable. MscLpJT2StateEntry .1.3.6.1.4.1.562.36.2.1.12.16.14.1 |
mscLpJT2AdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.14.1.1 |
mscLpJT2OperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.14.1.2 |
mscLpJT2UsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.14.1.3 |
mscLpJT2AvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.16.14.1.4 |
mscLpJT2ProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.16.14.1.5 |
mscLpJT2ControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.16.14.1.6 |
mscLpJT2AlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.16.14.1.7 |
mscLpJT2StandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.14.1.8 |
mscLpJT2UnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.14.1.9 |
mscLpJT2OperTableThis group contains the JT2 specific operational data for a JT2
component in a digital hierarchy interface. SEQUENCE OF MscLpJT2OperEntry .1.3.6.1.4.1.562.36.2.1.12.16.15 |
mscLpJT2OperEntryAn entry in the mscLpJT2OperTable. MscLpJT2OperEntry .1.3.6.1.4.1.562.36.2.1.12.16.15.1 |
mscLpJT2LosAlarmThis attribute displays whether a LOS (Loss of Signal) alarm state
is entered. An LOS alarm state is entered when LOS defects have
been observed and accumulated for a period of 2.5 seconds +/- 0.5
seconds. An LOS defect is declared at the JT2 line interface when
the input data is zero for 20 - 32 clock cycles. If the LOS defects are
intermittently occurring, the LOS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
An LOS failure alarm is cleared when the LOS defect is absent for a
period of 10 seconds +/- 0.5 seconds. The JT2 port goes into an
operationalState of disabled for the duration of the LOS alarm
condition. While the port is in the LOS alarm state, the port also
transmits the far-end RAI defect indicator on the out-going JT2 line.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.15.1.1 |
mscLpJT2LofAlarmThis attribute indicates whether a LOF (Loss of Frame) alarm state
is entered. A LOF alarm state is entered when LOF defects are
observed and accumulated for 2.5 seconds +/- 0.5 seconds or more.
A LOF defect occurs when seven or more consecutive incorrect
frame alignment patterns (4 multiframes) are received. If the LOF
defects are intermittently occurring, the LOF defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The LOF alarm is cleared when framing has been achieved for 10
seconds +/- 0.5 seconds. The port goes into an operationalState of
disabled for the duration of the LOF alarm condition. While the
port is in the LOF alarm state, the node also transmits the far-end
RAI defect indicator on the out-going JT2 line.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.15.1.2 |
mscLpJT2RxAisPhysicalAlarmThis attribute indicates whether a Physical AIS alarm state is
entered. A Physical AIS alarm state is entered when a Physical AIS
defect is observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds. A Physical AIS defect is declared when the incoming
signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If
the physical AIS defects are intermittently occurring, the physical
AIS defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
A Physical AIS alarm is cleared when the Physical AIS defect is
absent for a period of 10 seconds +/- 0.5 seconds. The port goes
into an operationalState of disabled until the AIS alarm condition is
cleared. While the port is in the Physical AIS alarm state, the node
also transmits the far-end RAI defect indicator on the out-going JT2
line.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.15.1.3 |
mscLpJT2RxAisPayloadAlarmThis attribute indicates whether a Payload AIS alarm state is
entered. A Payload AIS alarm state is entered when a Payload AIS
defect persists for a period of 2.5 seconds +/- 0.5 seconds. A
Payload AIS defect is declared when the incoming signal of the
6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a
sequence of 3,072 bits (0.5 ms). If the payload AIS defects are
intermittently occurring, the payload AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
A Payload AIS failure alarm is cleared when the Payload AIS
defect is absent for a period of 10 seconds +/- 0.5 seconds. The port
goes into an operationalState of disabled until the AIS alarm
condition is cleared. While the port is in the Payload AIS alarm
state, the node also transmits the far-end RAI defect indicator on the
out-going JT2 line.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.15.1.4 |
mscLpJT2RxRaiAlarmThis attribute indicates whether a Received RAI alarm state is
entered. A received RAI alarm state is entered when the RAI signal
is detected on the incoming JT2 Line (when 16 or more consecutive
RAI patterns of 1111111100000000 are received on the 4 kbit/s
data channel (m-bits) within the framing bits of the JT2 frame). The
JT2 port goes into an operationalState of Disabled until the RAI
alarm condition is cleared. The RAI alarm is cleared when four or
more consecutive non-RAI patterns (anything other than
1111111100000000) are received.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.15.1.5 |
mscLpJT2TxAisPhysicalAlarmThis attribute indicates whether an AIS (Alarm Indication Signal)
alarm is being transmitted on the outgoing JT2 line. Currently the
JT2 port only transmits a Physical AIS (no Payload AIS) on the
outgoing JT2 line.
Since there is no Idle signal defined for JT2, the AIS signal is
transmitted when the JT2 port is in the operationalState of locked.
The AIS signal may also be transmitted for diagnostic testing.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.15.1.6 |
mscLpJT2TxRaiAlarmThis attribute indicates whether an RAI defect indication pattern is
being sent on the out-going JT2 line. The RAI alarm pattern is
transmitted in the 4 kbit/s data channel (m-bits) when the port
detects a LOS, AIS or LOF alarm condition.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.16.15.1.7 |
mscLpJT2StatsTableThis group contains the statistical data for a JT2 component in a
digital hierarchy interface. SEQUENCE OF MscLpJT2StatsEntry .1.3.6.1.4.1.562.36.2.1.12.16.16 |
mscLpJT2StatsEntryAn entry in the mscLpJT2StatsTable. MscLpJT2StatsEntry .1.3.6.1.4.1.562.36.2.1.12.16.16.1 |
mscLpJT2RunningTimeThis attribute indicates the number of seconds since the JT2
component was activated and placed in an unlocked state or used for
operational testing. All the other error counts that follow as well as
each JT2 subcomponent's error counts can be updated when this
count is active.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.16.1.1 |
mscLpJT2ErrorFreeSecThis attribute indicates the number of seconds that the JT2 port has
been in an error free state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.16.1.2 |
mscLpJT2ErroredSecThis attribute indicates the total number of errored seconds for the
JT2 port. An errored second is declared when a second with one or
more Code Violation Error events, or one or more LOF or LOS
defects occur. A code violation error may be a cyclic redundancy
check (CRC) error or a bipolar violation (BPV) error.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.16.1.3 |
mscLpJT2SevErroredSecThis attribute indicates the total number of severely errored seconds
for the JT2 port. A severely errored second occurs when a second
with 255 or more Code Violation Error events or one or more LOF
or LOS defects occur.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.16.1.4 |
mscLpJT2SevErroredFrmSecThis attribute indicates the total number of severely errored framing
seconds for the JT2 port. A severely errored framing second occurs
when a second with one or more Framing Errors occur.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.16.1.5 |
mscLpJT2UnavailSecThis attribute indicates the total number of seconds that the
interface has been in an unavailable state. An unavailable state
occurs at the onset of 10 consecutive Severely Errored Seconds.
When the unavailable state is entered, the 10 Severely Errored
Seconds are immediately transfered to the count of
unavailableSeconds by incrementing the count of unavailSec by 10
and decrementing the count of sevErroredSec by 10. Whilst in the
unavailable state, an unavailableSecond is counted for each SES or
SEFS that occurs, and the count of SES and SEFS are both
inhibited. The unavailable state is cleared at the onset of 10
consecutive seconds which are not Severely Errored Seconds.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.16.1.6 |
mscLpJT2BpvErrorsThis attribute indicates the total count of bipolar violations (BPV).
A bipolar violation is an error in the alternate mark inversion pattern
(AMI) on the line. The value of this attribute will wrap to zero when
it reaches its maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.16.1.7 |
mscLpJT2CrcErrorsThis attribute indicates the total number of cyclic redundancy check
(CRC-5) errors detected on the incoming JT2 line. The value of this
attribute will wrap to 0 when its maximum value is reached.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.16.1.8 |
mscLpJT2FrameErrorsThis attribute indicates the total number of Framing Errors that have
occured on the JT2 port. A Framing Error is an error in the framing
bits. The value of this attribute will wrap to 0 when its maximum
value is reached.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.16.1.9 |
mscLpJT2LosStateChangesThis attribute indicates the total number of times that the incoming
signal on the JT2 line has been lost. The value of this attribute will
wrap to 0 when its maximum value is reached.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.16.16.1.10 |
mscLpJT2AdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpJT2AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.16.17 |
mscLpJT2AdminInfoEntryAn entry in the mscLpJT2AdminInfoTable. MscLpJT2AdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.16.17.1 |
mscLpJT2VendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.16.17.1.1 |
mscLpJT2CommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.16.17.1.2 |
mscLpHssi OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.17 |
mscLpHssiRowStatusTableThis entry controls the addition and deletion of
mscLpHssi components. SEQUENCE OF MscLpHssiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.17.1 |
mscLpHssiRowStatusEntryA single entry in the table represents a single
mscLpHssi component. MscLpHssiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.17.1.1 |
mscLpHssiRowStatusThis variable is used as the basis for SNMP naming of
mscLpHssi components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.17.1.1.1 |
mscLpHssiComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.17.1.1.2 |
mscLpHssiStorageTypeThis variable represents the storage type value for the
mscLpHssi tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.17.1.1.4 |
mscLpHssiIndexThis variable represents the index for the mscLpHssi tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.17.1.1.10 |
mscLpHssiTest OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.17.2 |
mscLpHssiTestRowStatusTableThis entry controls the addition and deletion of
mscLpHssiTest components. SEQUENCE OF MscLpHssiTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.17.2.1 |
mscLpHssiTestRowStatusEntryA single entry in the table represents a single
mscLpHssiTest component. MscLpHssiTestRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.17.2.1.1 |
mscLpHssiTestRowStatusThis variable is used as the basis for SNMP naming of
mscLpHssiTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.1 |
mscLpHssiTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.2 |
mscLpHssiTestStorageTypeThis variable represents the storage type value for the
mscLpHssiTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.4 |
mscLpHssiTestIndexThis variable represents the index for the mscLpHssiTest tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.10 |
mscLpHssiTestStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscLpHssiTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.17.2.10 |
mscLpHssiTestStateEntryAn entry in the mscLpHssiTestStateTable. MscLpHssiTestStateEntry .1.3.6.1.4.1.562.36.2.1.12.17.2.10.1 |
mscLpHssiTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.1 |
mscLpHssiTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.2 |
mscLpHssiTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.3 |
mscLpHssiTestSetupTableThis group contains all of the operational data for a Test
component. SEQUENCE OF MscLpHssiTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.17.2.11 |
mscLpHssiTestSetupEntryAn entry in the mscLpHssiTestSetupTable. MscLpHssiTestSetupEntry .1.3.6.1.4.1.562.36.2.1.12.17.2.11.1 |
mscLpHssiTestPurposeThis attribute records the purpose of the test so that the test results
can be associated and properly analyzed.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.1 |
mscLpHssiTestTypeThis attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.2 |
mscLpHssiTestFrmSizeThis attribute defines the size of the test data frames in number of
bytes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.3 |
mscLpHssiTestFrmPatternTypeThis attribute defines the type of data pattern generation to use. The
following lists the available pattern types:
ccitt32kBitPattern is a pseudo-random sequence of 32 kbit.
ccitt8MBitPattern is a pseudo-random sequence of 8Mbit.
customizedPattern is the pattern defined in the customizedPattern
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.4 |
mscLpHssiTestCustomizedPatternThis attribute allows a customized 32 bit pattern to be defined for
use in the test data frames. This attribute is used when the attribute
frmPatternType is set to CustomizedPattern. Note that a 55 hex
pattern is an alternating 1 and 0 pattern.rw Hex .1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.5 |
mscLpHssiTestDataStartDelayThis attribute specifies the time delay (in seconds) between when
the test expects the loop to have been set up, to when the test data
actually starts to be transmitted. This attribute is to accommodate
some non-standard equipment that requires extra time for setting up
a requested loop.
This attribute is ignored when the test type is set to externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.6 |
mscLpHssiTestDisplayIntervalThis attribute defines the interval (in minutes) between which
interim test results are to be displayed. Results are displayed at the
operator console at which the test was started. When the test type is
set to externalLoop, this attribute is ignored. There will be no
display of results if displayInterval is set to 0. This attribute can be
changed anytime.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.7 |
mscLpHssiTestDurationThis attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.8 |
mscLpHssiTestResultsTableThis group contains all the statistics related attributes of the Test
component. SEQUENCE OF MscLpHssiTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.17.2.12 |
mscLpHssiTestResultsEntryAn entry in the mscLpHssiTestResultsTable. MscLpHssiTestResultsEntry .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1 |
mscLpHssiTestElapsedTimeThis attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.1 |
mscLpHssiTestTimeRemainingThis attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.2 |
mscLpHssiTestCauseOfTerminationThis attribute indicates either the status of the test or the cause of
the test's termination:
neverStarted indicates that the test has not yet been started.
testRunning indicates that the test has been started.
stoppedByOperator indicates that the operator issued a stop
command on a test that was running.
testTimeExpired indicates that the test ran for the time specified by
the test's duration.
loopCodeSyncFailed indicates that the local end failed to
synchronize to the loopCode pattern. The local end transmits the
loopCode pattern to cause the remote end to apply a loopback, after
which the local end should receive the loopCode pattern. The exact
pattern used to request loopCode depends on the test type. This
failure indicates a high rate of transmission errors, or that the
remote end has failed to apply the loopback.
patternSyncFailed indicates that the local end failed to synchronize
to the frmPatternType test pattern, that should have been looped
back at the remote end. This failure indicates a high rate of
transmission errors or the absence of a loopback.
patternSyncLost indicates that the local end gained and then lost
synchronization to the returned frmPatternType test pattern. This
failure indicates a sudden increase in transmission errors, frame
slippage, or the removal of an existing loopback.
unknown is set when a reason to terminate other than those listed
here is encountered.
Note: Only MSA cards support recognition of the failures
loopCodeSyncFailed, patternSyncFailed and patternSyncLost.
Other cards will not terminate the test under the conditions
described by these values.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.3 |
mscLpHssiTestBitsTxThis attribute is the total number of bits sent during the test period.
As long as the line speed of the hardware interface is less than
70 Mbit/s, this counter is not expected to reach the maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.4 |
mscLpHssiTestBytesTxThis attribute is the total number of bytes sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.5 |
mscLpHssiTestFrmTxThis attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.6 |
mscLpHssiTestBitsRxThis attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach the maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.7 |
mscLpHssiTestBytesRxThis attribute is the total number of bytes received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.8 |
mscLpHssiTestFrmRxThis attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.9 |
mscLpHssiTestErroredFrmRxThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the total number of errored
frames received during the test period. This counter is not expected
to reach its maximum value. The counter will wrap around to 0 if it
does reach its maximum value.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.10 |
mscLpHssiTestBitErrorRateThis attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
For all other card types, this attribute is the calculated bit error rate
on the link. Test data are generated and sent in frames of a preset
size (frameSize). The Test component will try to estimate the
number of bit errors in any errored frame which is identifiable. The
statistics will be updated accordingly. A lost frame (may be due to
an error on the flag sequence) will be discarded for the bit error rate
calculation. The result is presented in the form of xEsyy, where x is
the mantissa, syy is the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.ro AsciiString .1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.11 |
mscLpHssiProvTableThis group contains the specific provisioning data for a Hssi
component. SEQUENCE OF MscLpHssiProvEntry .1.3.6.1.4.1.562.36.2.1.12.17.10 |
mscLpHssiProvEntryAn entry in the mscLpHssiProvTable. MscLpHssiProvEntry .1.3.6.1.4.1.562.36.2.1.12.17.10.1 |
mscLpHssiLinkModeThis attribute defines the intended gender of the HSSI port. The
actual gender of the port is determined by the hardware setup.
In dte mode, the ta line signal is driven as specified by the attribute
readyLineState when the HSSI port passes its diagnostics. The ta
line signal is then driven as specified by the attribute
dataTransferLineState when the application is ready to transfer
data. On the other hand, the input line signal ca is compared against
those specified in the attributes readyLineState and
dataTransferLineState. The application will be notified when the
specified input line states are observed.
In dce mode, the Hssi component behaves similarly as when it is in
dte mode. However, it will be driving the dce line signal (ca) and
monitoring the dte line signal (ta) as specified by the attributes
readyLineState and dataTransferLineState.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.10.1.1 |
mscLpHssiReadyLineStateThis attribute specifies the line signal originating from the HSSI
interface that will always be turned on, provided the HSSI interface
passes it diagnostics. This set of signal is generally required for
maintaining the connection. Note that both dte and dce signals are
specified in this attribute. The appropriate set of specified signals
will be turned on or checked according to the operational attribute
actualLinkMode. See also linkMode.
Description of bits:
ca(0)
ta(1)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.17.10.1.2 |
mscLpHssiDataTransferLineStateThis attribute specifies the line signals required to indicate that the
external equipment is in a good state (that is, data transfer can
proceed). Note that both dte and dce signals are specified in this
attribute. The appropriate set of specified signals will be turned on
or checked according to the operational attribute actualLinkMode.
The value of this attribute must be a superset of that of the
readyLineState attribute.
See also linkMode.
Description of bits:
ca(0)
ta(1)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.17.10.1.3 |
mscLpHssiLineSpeedThis attribute defines the speed of the line for source clocking. This
attribute is ignored if the interface is not providing a clock. Note
that the actual clock rate are available in the operational attributes
actualTxLineSpeed and actualRxLineSpeed.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.17.10.1.5 |
mscLpHssiApplicationFramerNameThis attribute contains the component name of a Framer which is
associated with the Hssi component.rw Link .1.3.6.1.4.1.562.36.2.1.12.17.10.1.7 |
mscLpHssiCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpHssiCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.17.11 |
mscLpHssiCidDataEntryAn entry in the mscLpHssiCidDataTable. MscLpHssiCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.17.11.1 |
mscLpHssiCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.17.11.1.1 |
mscLpHssiAdminInfoTableThis group contains the attributes pertaining to the vendor of the
equipment. SEQUENCE OF MscLpHssiAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.17.12 |
mscLpHssiAdminInfoEntryAn entry in the mscLpHssiAdminInfoTable. MscLpHssiAdminInfoEntry .1.3.6.1.4.1.562.36.2.1.12.17.12.1 |
mscLpHssiVendorThis is the name of the vendor supplying the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.17.12.1.1 |
mscLpHssiCommentTextAny miscellaneous text about the facility.rw AsciiString .1.3.6.1.4.1.562.36.2.1.12.17.12.1.2 |
mscLpHssiIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscLpHssiIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.17.13 |
mscLpHssiIfEntryEntryAn entry in the mscLpHssiIfEntryTable. MscLpHssiIfEntryEntry .1.3.6.1.4.1.562.36.2.1.12.17.13.1 |
mscLpHssiIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.13.1.1 |
mscLpHssiIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.12.17.13.1.2 |
mscLpHssiOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpHssiOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.17.14 |
mscLpHssiOperStatusEntryAn entry in the mscLpHssiOperStatusTable. MscLpHssiOperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.17.14.1 |
mscLpHssiSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.14.1.1 |
mscLpHssiStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpHssiStateEntry .1.3.6.1.4.1.562.36.2.1.12.17.15 |
mscLpHssiStateEntryAn entry in the mscLpHssiStateTable. MscLpHssiStateEntry .1.3.6.1.4.1.562.36.2.1.12.17.15.1 |
mscLpHssiAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.15.1.1 |
mscLpHssiOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.15.1.2 |
mscLpHssiUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.15.1.3 |
mscLpHssiAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.17.15.1.4 |
mscLpHssiProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.17.15.1.5 |
mscLpHssiControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.17.15.1.6 |
mscLpHssiAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.17.15.1.7 |
mscLpHssiStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.15.1.8 |
mscLpHssiUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.15.1.9 |
mscLpHssiOperTableThis group contains all specific operational data for a Hssi
component. SEQUENCE OF MscLpHssiOperEntry .1.3.6.1.4.1.562.36.2.1.12.17.16 |
mscLpHssiOperEntryAn entry in the mscLpHssiOperTable. MscLpHssiOperEntry .1.3.6.1.4.1.562.36.2.1.12.17.16.1 |
mscLpHssiActualLinkModeThis attribute contains the actual link mode defined by the
hardware. Note that the hardware overrides the provisionable data.
The port behaves as a dce or dte according to the actualLinkMode.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.17.16.1.1 |
mscLpHssiLineStateThis attribute contains the state of the interface signals.
Description of bits:
ca(0)
ta(1)
tm(2)
la(3)
lb(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.17.16.1.2 |
mscLpHssiActualTxLineSpeedThis attribute is the measured speed of the transmit clock. Note the
reported transmit speed is in an error of +/- 10000 bit/sro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.17.16.1.3 |
mscLpHssiActualRxLineSpeedThis attribute is the measured speed of the receive clock. Note the
reported receive speed is in an error of +/- 10000 bit/sro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.17.16.1.4 |
mscLpHssiDataXferStateChangesThis attribute contains the number of times that the line has entered
or exited the data transfer state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.12.17.16.1.5 |
mscLpEng OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.23 |
mscLpEngRowStatusTableThis entry controls the addition and deletion of
mscLpEng components. SEQUENCE OF MscLpEngRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.23.1 |
mscLpEngRowStatusEntryA single entry in the table represents a single
mscLpEng component. MscLpEngRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.23.1.1 |
mscLpEngRowStatusThis variable is used as the basis for SNMP naming of
mscLpEng components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.23.1.1.1 |
mscLpEngComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.23.1.1.2 |
mscLpEngStorageTypeThis variable represents the storage type value for the
mscLpEng tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.23.1.1.4 |
mscLpEngIndexThis variable represents the index for the mscLpEng tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.23.1.1.10 |
mscLpEngDs OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.23.2 |
mscLpEngDsRowStatusTableThis entry controls the addition and deletion of
mscLpEngDs components. SEQUENCE OF MscLpEngDsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.23.2.1 |
mscLpEngDsRowStatusEntryA single entry in the table represents a single
mscLpEngDs component. MscLpEngDsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.23.2.1.1 |
mscLpEngDsRowStatusThis variable is used as the basis for SNMP naming of
mscLpEngDs components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.1 |
mscLpEngDsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.2 |
mscLpEngDsStorageTypeThis variable represents the storage type value for the
mscLpEngDs tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.4 |
mscLpEngDsIndexThis variable represents the index for the mscLpEngDs tables. Enumeration .1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.10 |
mscLpEngDsOv OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.23.2.2 |
mscLpEngDsOvRowStatusTableThis entry controls the addition and deletion of
mscLpEngDsOv components. SEQUENCE OF MscLpEngDsOvRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.23.2.2.1 |
mscLpEngDsOvRowStatusEntryA single entry in the table represents a single
mscLpEngDsOv component. MscLpEngDsOvRowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1 |
mscLpEngDsOvRowStatusThis variable is used as the basis for SNMP naming of
mscLpEngDsOv components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.1 |
mscLpEngDsOvComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.2 |
mscLpEngDsOvStorageTypeThis variable represents the storage type value for the
mscLpEngDsOv tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.4 |
mscLpEngDsOvIndexThis variable represents the index for the mscLpEngDsOv tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.10 |
mscLpEngDsOvProvTableThis group contains provisionable attributes for the DataStream Ov
components under Lp Engineering.
DESCRIPTION SEQUENCE OF MscLpEngDsOvProvEntry .1.3.6.1.4.1.562.36.2.1.12.23.2.2.10 |
mscLpEngDsOvProvEntryAn entry in the mscLpEngDsOvProvTable. MscLpEngDsOvProvEntry .1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1 |
mscLpEngDsOvAgentQueueSizeThis attribute specifies the maximum size of the DCS Agent's
queue for this data stream on this LP. For more details on the
defaults and other information, refer to the parent component's
agentQueueSize attribute.
The size should be set to 0 if absolutely no data is to be accepted
from applications. There are threshold alarms based on the value of
the Agent's currentQueueSize attribute (a Set when the queue
becomes 75% full and a Clear after dropping back to 50% full).
To properly determine what to set this to, consult the 'Magellan
Passport Engineering Notes and Guidelines'.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1.1 |
mscLpEngDsOperTableThis group contains operational attributes for the DataStream
components under Lp Engineering. SEQUENCE OF MscLpEngDsOperEntry .1.3.6.1.4.1.562.36.2.1.12.23.2.10 |
mscLpEngDsOperEntryAn entry in the mscLpEngDsOperTable. MscLpEngDsOperEntry .1.3.6.1.4.1.562.36.2.1.12.23.2.10.1 |
mscLpEngDsAgentQueueSizeThis attribute indicates the maximum size of the DCS Agent queue
size maximum for a DCS data stream on the LP. It is the maximum
size to which the Agent's currentQueueSize can grow. When the
queue is full and more data is offered to the Agent, it will be
discarded.
The following are the system defaults (in number of records):
- alarm: 100
- accounting: 10000
- debug: 0
- log: 50
- scn: 200
- trap: 50
- stats: 0
To override the system defaults, see Lp Eng Ds Ov's
agentQueueSize attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.23.2.10.1.1 |
mscLpProvTableThis Group contains the provisionable attributes for the LP
component. SEQUENCE OF MscLpProvEntry .1.3.6.1.4.1.562.36.2.1.12.100 |
mscLpProvEntryAn entry in the mscLpProvTable. MscLpProvEntry .1.3.6.1.4.1.562.36.2.1.12.100.1 |
mscLpMainCardThis is the preferred processor card on which this LP should be
assigned.rw Link .1.3.6.1.4.1.562.36.2.1.12.100.1.1 |
mscLpSpareCardThis is the spare processor card on which this LP should be
assigned.rw Link .1.3.6.1.4.1.562.36.2.1.12.100.1.2 |
mscLpLogicalProcessorTypeThis is the Logical Processor Type (LPT) that determines which
software this LP will run.rw Link .1.3.6.1.4.1.562.36.2.1.12.100.1.3 |
mscLpCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscLpCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.101 |
mscLpCidDataEntryAn entry in the mscLpCidDataTable. MscLpCidDataEntry .1.3.6.1.4.1.562.36.2.1.12.101.1 |
mscLpCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.12.101.1.1 |
mscLpStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpStateEntry .1.3.6.1.4.1.562.36.2.1.12.102 |
mscLpStateEntryAn entry in the mscLpStateTable. MscLpStateEntry .1.3.6.1.4.1.562.36.2.1.12.102.1 |
mscLpAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.102.1.1 |
mscLpOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.102.1.2 |
mscLpUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.102.1.3 |
mscLpAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.102.1.4 |
mscLpProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.102.1.5 |
mscLpControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.102.1.6 |
mscLpAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.102.1.7 |
mscLpStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.102.1.8 |
mscLpUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.102.1.9 |
mscLpOperTableThis Group contains the operational attributes for the LP
component. SEQUENCE OF MscLpOperEntry .1.3.6.1.4.1.562.36.2.1.12.103 |
mscLpOperEntryAn entry in the mscLpOperTable. MscLpOperEntry .1.3.6.1.4.1.562.36.2.1.12.103.1 |
mscLpActiveCardThis attribute indicates on which card this LP is currently running
(if any).ro RowPointer .1.3.6.1.4.1.562.36.2.1.12.103.1.1 |
mscLpMainCardStatusThis attribute specifies the status of this LP's main card. The
following values have been defined:
notProvisioned No main card has been provisioned.
notAvailable The main card is not available.
available The main card is available (running as standby).
active The main card is running as active.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.103.1.2 |
mscLpSpareCardStatusThis attribute specifies the status of this LP's spare card. The
following values have been defined:
notProvisioned No spare card has been provisioned.
notAvailable The spare card is not available.
alreadyInUse The spare card is already in use by another LP.
available The spare card is available (running as standby).
active The spare card is running as active.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.103.1.3 |
mscLpRestartOnCpSwitchThis attribute indicates whether the Lp always restarts upon a CP
switchover. The value is true if the featureList of the associated Sw
Lpt component contains a feature that does not support hitless CP
switchover. The value is also true when the feature
noHitlessCpSwitch is provisioned on the CP. A value of false does
not guarantee 'no restart'; dynamic conditions may still result in an
FP restart when a CP switchover occurs.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.103.1.4 |
mscLpScheduledSwitchoverThis attribute indicates the execution time of the scheduled
switchover. When there is no switchover scheduled the time is
equals to 0 (0000-00-00 00:00).ro EnterpriseDateAndTime .1.3.6.1.4.1.562.36.2.1.12.103.1.5 |
mscLpUtilTableThis group contains the operational attributes that specify the
processor's utilization levels. When this group exists for an LP
component, the attributes are representative of the active card. SEQUENCE OF MscLpUtilEntry .1.3.6.1.4.1.562.36.2.1.12.104 |
mscLpUtilEntryAn entry in the mscLpUtilTable. MscLpUtilEntry .1.3.6.1.4.1.562.36.2.1.12.104.1 |
mscLpTimeIntervalThis attribute indicates the time period (in minutes) for which the
average, minimum and maximum utilization values are calculated.
This attribute is reset to 0 every 15 minutes.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.104.1.1 |
mscLpCpuUtilThis attribute indicates an approximation of the current processor
utilization level (expressed as a percentage).ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.2 |
mscLpCpuUtilAvgThis attribute indicates an average processor utilization level over
the specified time period, timeInterval. This average is calculated
based on one minute CPU utilization averages.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.3 |
mscLpCpuUtilAvgMinThis attribute indicates the minimum processor utilization level over
a specified time period, timeInterval. This is based on one minute
CPU utilization averages.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.4 |
mscLpCpuUtilAvgMaxThis attribute indicates the maximum processor utilization level
over a specified time period, timeInterval. This is based on one
minute CPU utilization averages.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.5 |
mscLpMsgBlockUsageThis attribute indicates the processor's current shared message
block memory utilization.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.6 |
mscLpMsgBlockUsageAvgThis attribute indicates the processor's average memory utilization
of shared message blocks, calculated over a specified time period,
timeInterval. This utilization value is calculated using 15 second
samples. At the start of each timeInterval, this average memory
utilization is reset to the current usage, sharedMsgBlockUsage.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.7 |
mscLpMsgBlockUsageAvgMinThis attribute indicates the processor's minimum memory
utilization of shared message blocks, calculated over a specified
time period, timeInterval. This utilization value is calculated using
15 second samples. At the start of each timeInterval, this minimum
memory utilization is reset to the current usage,
sharedMsgBlockUsage.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.8 |
mscLpMsgBlockUsageAvgMaxThis attribute indicates the processor's maximum memory
utilization of shared message blocks, calculated over a specified
time period, timeInterval. This utilization value is calculated using
15 second samples. At the start of each timeInterval, this maximum
memory utilization is reset to the current usage,
sharedMsgBlockUsage.
If there is no shared memory on the card, this attribute indicates 0.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.9 |
mscLpLocalMsgBlockUsageThis attribute indicates the processor's current memory utilization
of message blocks which are used for local messaging on the card.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.10 |
mscLpLocalMsgBlockUsageAvgThis attribute indicates the processor's average memory utilization
of message blocks used for local messaging on the card, calculated
over a specified time period, timeInterval. This utilization value is
calculated using 15 second samples. At the start of each
timeInterval, this average memory utilization is reset to the current
usage, localMsgBlockUsage.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.11 |
mscLpLocalMsgBlockUsageMinThis attribute indicates the processor's minimum memory
utilization of message blocks used for local messaging on the card,
calculated over a specified time period, timeInterval. This
utilization value is updated at 15 second intervals. At the start of
each timeInterval, this minimum memory utilization is reset to the
current usage, localMsgBlockUsage.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.12 |
mscLpLocalMsgBlockUsageMaxThis attribute indicates the processor's maximum memory
utilization of message blocks used for local messaging on the card,
calculated over a specified time period, timeInterval. This
utilization value is updated at 15 second intervals. At the start of
each timeInterval, this maximum memory utilization is reset to the
current usage, localMsgBlockUsage.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.104.1.13 |
mscLpCapTableThis group contains the operational attributes that specify the
processor's capacity levels. When this group exists for an LP
component, the attributes are representative of the active Card. SEQUENCE OF MscLpCapEntry .1.3.6.1.4.1.562.36.2.1.12.105 |
mscLpCapEntryAn entry in the mscLpCapTable. MscLpCapEntry .1.3.6.1.4.1.562.36.2.1.12.105.1 |
mscLpMsgBlockCapacityThis attribute indicates the processor card's shared message block
memory capacity.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.105.1.1 |
mscLpLocalMsgBlockCapacityThis attribute indicates the processor card's local message block
memory capacity. These message blocks are used for local
messaging on the card.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.105.1.2 |
mscLpLinkToApplicationsTableThis attribute allows applications to link themselves directly to the
LP component. SEQUENCE OF MscLpLinkToApplicationsEntry .1.3.6.1.4.1.562.36.2.1.12.242 |
mscLpLinkToApplicationsEntryAn entry in the mscLpLinkToApplicationsTable. MscLpLinkToApplicationsEntry .1.3.6.1.4.1.562.36.2.1.12.242.1 |
mscLpLinkToApplicationsValueThis variable represents both the value and the index for the
mscLpLinkToApplicationsTable.ro Link .1.3.6.1.4.1.562.36.2.1.12.242.1.1 |
mscLpMemoryCapacityTableThis attribute indicates the processor card's memory capacity for
each type of memory. SEQUENCE OF MscLpMemoryCapacityEntry .1.3.6.1.4.1.562.36.2.1.12.244 |
mscLpMemoryCapacityEntryAn entry in the mscLpMemoryCapacityTable. MscLpMemoryCapacityEntry .1.3.6.1.4.1.562.36.2.1.12.244.1 |
mscLpMemoryCapacityIndexThis variable represents the mscLpMemoryCapacityTable
specific index for the mscLpMemoryCapacityTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.244.1.1 |
mscLpMemoryCapacityValueThis variable represents an individual value for the
mscLpMemoryCapacityTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.12.244.1.2 |
mscLpMemoryUsageTableThis attribute indicates the processor's current memory utilization
for each type of memory. SEQUENCE OF MscLpMemoryUsageEntry .1.3.6.1.4.1.562.36.2.1.12.245 |
mscLpMemoryUsageEntryAn entry in the mscLpMemoryUsageTable. MscLpMemoryUsageEntry .1.3.6.1.4.1.562.36.2.1.12.245.1 |
mscLpMemoryUsageIndexThis variable represents the mscLpMemoryUsageTable
specific index for the mscLpMemoryUsageTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.245.1.1 |
mscLpMemoryUsageValueThis variable represents an individual value for the
mscLpMemoryUsageTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.245.1.2 |
mscLpMemoryUsageAvgTableThis attribute indicates the processor's average memory utilization
for each type of memory in the specified time period, timeInterval.
This value is calculated using 15 second samples. SEQUENCE OF MscLpMemoryUsageAvgEntry .1.3.6.1.4.1.562.36.2.1.12.276 |
mscLpMemoryUsageAvgEntryAn entry in the mscLpMemoryUsageAvgTable. MscLpMemoryUsageAvgEntry .1.3.6.1.4.1.562.36.2.1.12.276.1 |
mscLpMemoryUsageAvgIndexThis variable represents the mscLpMemoryUsageAvgTable
specific index for the mscLpMemoryUsageAvgTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.276.1.1 |
mscLpMemoryUsageAvgValueThis variable represents an individual value for the
mscLpMemoryUsageAvgTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.276.1.2 |
mscLpMemoryUsageAvgMinTableThis attribute indicates the processor's minimum memory
utilization for each type of memory in the specified time period,
timeInterval. This value is calculated using 15 second samples. SEQUENCE OF MscLpMemoryUsageAvgMinEntry .1.3.6.1.4.1.562.36.2.1.12.277 |
mscLpMemoryUsageAvgMinEntryAn entry in the mscLpMemoryUsageAvgMinTable. MscLpMemoryUsageAvgMinEntry .1.3.6.1.4.1.562.36.2.1.12.277.1 |
mscLpMemoryUsageAvgMinIndexThis variable represents the mscLpMemoryUsageAvgMinTable
specific index for the mscLpMemoryUsageAvgMinTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.277.1.1 |
mscLpMemoryUsageAvgMinValueThis variable represents an individual value for the
mscLpMemoryUsageAvgMinTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.277.1.2 |
mscLpMemoryUsageAvgMaxTableThis attribute indicates the processor's maximum memory
utilization for each type of memory in the specified time period,
timeInterval. This value is calculated using 15 second samples. SEQUENCE OF MscLpMemoryUsageAvgMaxEntry .1.3.6.1.4.1.562.36.2.1.12.278 |
mscLpMemoryUsageAvgMaxEntryAn entry in the mscLpMemoryUsageAvgMaxTable. MscLpMemoryUsageAvgMaxEntry .1.3.6.1.4.1.562.36.2.1.12.278.1 |
mscLpMemoryUsageAvgMaxIndexThis variable represents the mscLpMemoryUsageAvgMaxTable
specific index for the mscLpMemoryUsageAvgMaxTable. Enumeration .1.3.6.1.4.1.562.36.2.1.12.278.1.1 |
mscLpMemoryUsageAvgMaxValueThis variable represents an individual value for the
mscLpMemoryUsageAvgMaxTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.12.278.1.2 |
logicalProcessorMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.11 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.11 |
logicalProcessorGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.11.1 |
logicalProcessorGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.11.1.1 |
logicalProcessorGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.11.1.1.3 |
logicalProcessorGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.11.1.1.3.2 |
logicalProcessorCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.11.3 |
logicalProcessorCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.11.3.1 |
logicalProcessorCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.11.3.1.3 |
logicalProcessorCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.11.3.1.3.2 |