Nortel-MsCarrier-MscPassport-PorsTrunksMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-PorsTrunksMIB.
81
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
81 total| Object Name |
|---|
mscTrkPa OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.60.4 |
mscTrkPaRowStatusTableThis entry controls the addition and deletion of
mscTrkPa components. SEQUENCE OF MscTrkPaRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.4.1 |
mscTrkPaRowStatusEntryA single entry in the table represents a single
mscTrkPa component. MscTrkPaRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.4.1.1 |
mscTrkPaRowStatusThis variable is used as the basis for SNMP naming of
mscTrkPa components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.4.1.1.1 |
mscTrkPaComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.4.1.1.2 |
mscTrkPaStorageTypeThis variable represents the storage type value for the
mscTrkPa tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.4.1.1.4 |
mscTrkPaIndexThis variable represents the index for the mscTrkPa tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.60.4.1.1.10 |
mscTrkPaProvTableThis group contains all provisionable attributes relevant to path
oriented traffic on a trunk. These attributes provide the maximum
number of Logical Channels that are permitted under a Trunk/n and
the maximum total bandwidth they are allowed to occupy as a
percentage of the outgoing trunk bandwidth. SEQUENCE OF MscTrkPaProvEntry .1.3.6.1.4.1.562.36.2.1.60.4.10 |
mscTrkPaProvEntryAn entry in the mscTrkPaProvTable. MscTrkPaProvEntry .1.3.6.1.4.1.562.36.2.1.60.4.10.1 |
mscTrkPaMaxLcThis attribute indicates the number of Logical Channels (LCh/n)
supported on this trunk. This attribute is used to allocate memory on
the trunk FP for the PORS forwarding tables.Unless running in
mapped mode on ATM hardware, the PathAdmin will add 100
channels to maxLc to reduce the chances of allocation clashes.
However, you should never see more than maxLc channels in use
for any extended period of time. On ATM hardware in mapped
mode the PathAdmin will only add 10 channels to maxLc to permit
more efficient use of the available VCC space.
The PathAdmin may not be able to honor a request for maxLc
channels. This will happen when the neighbor PathAdmin asks for
less channels than this PathAdmin. To resolve the conflict the
PathAdmin will always pick the minimum of the two maxLc values.
This minimum value is called the negotiatedMaxLc and can be
viewed as an operational parameter of the PathAdmin.
Note that in mapped mode on ATM hardware, the value of this
attribute provides an upper bound to the number of VCCs that this
Trunk/n PathAdmin can occupy. It is not a guarantee that maxLc
VCCs will be available to this PathAdmin because the VCC space is
a shared resource on the card or port.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.10.1.1 |
mscTrkPaMaxReservedBwOutThis attribute controls the percentage of trunk bandwidth which
may be reserved by outgoing path oriented traffic on the trunk. The
sum of requiredBandwidth attributes for all paths on this trunk must
not exceed this attribute. Setting this attribute to zero (0) prevents
paths from being established on this trunk. The limit of reserved
bandwidth for incoming path oriented traffic is set using the same
attribute on the trunk component on the other end of the trunk. If
this attribute is set to 100% connectionless traffic is given a
minimum of 1Kbit per second for administrative traffic. This
attribute may now be changed without the trunk being restaging. If
the value is decreased calls may be bumped as necessary to free up
bandwdith. Increasing the value will have no impact on existing
calls and new calls will be able to use the new bandwidth.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.10.1.2 |
mscTrkPaTrunkSecurityThis attribute indicates the security level of the trunk. Zero(0)
represents the most secure trunk and seven(7) represents the least
secure. The path's minimum security requirement is indicated by
the Plc requiredSecurity attribute, with values identical in range and
meaning to this attribute. PORS ensures that the route selected does
not contain a trunk whose PathAdmin trunkSecurity attribute is
numerically greater than the path's requiredSecurity.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.10.1.3 |
mscTrkPaSupportedTrafficTypesThis attribute indicates the type of traffic that can be transmitted on
the trunk. There are eight(8) possible traffic types, and the trunk can
transmit all of them if desired. The voice, data and video traffic
types are defined, and five(5) other traffic types can be defined by
the network administration. This attribute is used in the route
selection process to limit the route to trunks that support the traffic
type carried by the path. The requiredTrafficType attribute of the
PLC indicates the type of traffic carried on the path.
Description of bits:
voice(0)
data(1)
video(2)
trafficType1(3)
trafficType2(4)
trafficType3(5)
trafficType4(6)
trafficType5(7)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.60.4.10.1.4 |
mscTrkPaTrunkTypeThis attribute lists the type of the trunk. There can be up to eight(8)
types of trunks. The terrestrial and satellite trunk types have been
defined, leaving six(6) remaining types that can be defined by the
network administration. The set of allowed trunk types for a path is
indicated in the permittedTrunkType attribute of the PLC. When
selecting a route, PORS only chooses trunks whose PathAdmin
trunkType are in the permittedTrunkTypes set of the path.rw Enumeration .1.3.6.1.4.1.562.36.2.1.60.4.10.1.5 |
mscTrkPaCustomerParameterThis attribute indicates the customer defined parameter for the
trunk. Its value, a number from zero(0) to seven(7), is chosen by a
network administration to have a meaning specific to their network,
thus allowing them to customize the use of their trunks. A
complementary PLC attribute, requiredCustomerParameter, also
has a value from zero(0) to seven(7). The Route Selector does not
consider trunks whose PathAdmin customerParameter is greater
than the requiredCustomerParameter of the path.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.10.1.6 |
mscTrkPaTrunkCostThis attribute is the cost metric for the trunk. This value is assigned
by the network administration to represent the network cost of using
this trunk. It can be related to distance, speed, dollars, or any other
factor that could be taken into consideration. If the
trunkAttributeToMinimize is set to trunkCost, PORS finds a route
with the smallest sum of the PathAdmin trunkCost attribute over all
trunks. The trunk cost can be increased or decreased without
disrupting the service to the link. If it is increased and the PORS
optimization feature is enabled calls will move off this link to lower
cost links when possible. If the cost is decreased new calls will be
attracted to this link.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.10.1.7 |
mscTrkPaOperTableThis group contains all operational attributes relevant to path
oriented and connectionless bandwidth utilization and path activity
on a trunk. SEQUENCE OF MscTrkPaOperEntry .1.3.6.1.4.1.562.36.2.1.60.4.11 |
mscTrkPaOperEntryAn entry in the mscTrkPaOperTable. MscTrkPaOperEntry .1.3.6.1.4.1.562.36.2.1.60.4.11.1 |
mscTrkPaStateThis attribute gives the operational state of the PathAdmin
component. The PathAdmin may be up, down, goingDown, staging
or downWaitingRestage.ro AsciiString .1.3.6.1.4.1.562.36.2.1.60.4.11.1.1 |
mscTrkPaUsedLcThis attribute gives the total number of Logical Channels currently
busy on the trunk. When this number reaches maxLc, no more paths
are allowed to instantiate through this trunk. Note that it is possible
for usedLc to be less than maxLc but for there to be no currently
free LogicalChannels. This is because a LogicalChannel can be in
one of several intermediate states between free and busy.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.11.1.2 |
mscTrkPaNegotiatedMaxLcThis attribute gives the actual value of maxLc that the PathAdmin
has decided on after negotiation with the far end PathAdmin. If
there is disagreement between the two PathAdmin's maxLc
provisionable attributes the smaller of the two is chosen on both
sides. This attribute reflects the minimum of these two maxLc's.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.11.1.3 |
mscTrkPaMaxReservableBwOutThis attribute gives the total bandwidth that this PathAdmin is
allowed to reserve. This number is computed by multiplying the
parent trunk's measuredSpeedToIf attribute by the
maxReservedBwOut provisionable attribute of this PathAdmin.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.11.1.4 |
mscTrkPaOverReservedBwOutWhen bumping is required to free up enough bandwidth for a new
path there exists a short period of time when both the new path and
the soon to be bumped path are occupying the same bandwidth.
This means that the total amount of reserved bandwidth will exceed
maxReservableBwOut. When this happens the unreservedBwOut
attribute will be 0 and the overReservedBwOut attribute will be non-
zero to indicate by how much we are currently overcommitted. This
value should quickly drop back to zero as the bumping starts to
clear the lower holdingPriority calls.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.11.1.5 |
mscTrkPaUnreservedBwOutThis attribute gives the total of amount of bandwidth that is still
available for reservation by new connections. When this number
reaches 0 the PathAdmin will no longer admit new connections to
the trunk. This number represents available bandwidth in the
outward going direction. To determine the inward available
bandwidth you must query the PathAdmin at the other end of this
Trunk.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.11.1.6 |
mscTrkPaClashCountThis attribute gives the total number of path setup requests that
resulted in an LCh/n or Vcc/x.y clash. A large value for this number
is an indicator of poor performance by the PathAdmin in its
allocation of LCh/n or Vcc/x.y components. In general the channels
will be allocated in opposite orders at each end of the Trunk but this
may not always be the case. Note that as the PathAdmin runs out of
LCh/n or Vcc/x.y components the number of clashes will increase.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.11.1.7 |
mscTrkPaNegotiatedSupportedTrafficTypesThis attribute gives the actual value of supportedTrafficTypes that
the PathAdmin has decided on after negotiation with the far end
PathAdmin. If there is disagreement between the two PathAdmin's
supportedTrafficTypes provisionable attributes the union of the two
is chosen on both sides. This attribute reflects the union of these two
supportedTrafficTypes 's. It is this union that is advertised to all
other nodes in the network and which is used for routing decisions.
Description of bits:
voice(0)
data(1)
video(2)
trafficType1(3)
trafficType2(4)
trafficType3(5)
trafficType4(6)
trafficType5(7)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.60.4.11.1.9 |
mscTrkPaNegotiatedTrunkSecurityThis attribute gives the actual value of the trunkSecurity that the
PathAdmin has decided on after negotiation with the far end
PathAdmin. If there is disagreement between the two PathAdmin's
trunkSecurity provisionable attributes the larger of the two is chosen
on both sides. This attribute reflects the maximum of these two
trunkSecurity's.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.11.1.10 |
mscTrkPaNegotiatedCustomerParameterThis attribute gives the actual value of customerParameter that the
PathAdmin has decided on after negotiation with the far end
PathAdmin. If there is disagreement between the two PathAdmin's
customerParameter provisionable attributes the larger of the two is
chosen on both sides. This attribute reflects the maximum of these
two customerParameter's.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.11.1.11 |
mscTrkPaNegotiatedTrunkCostThis attribute gives the actual value of trunkCost that the
PathAdmin has decided on after negotiation with the far end
PathAdmin. If there is disagreement between the two PathAdmin's
trunkCost provisionable attributes the larger of the two is chosen on
both sides. This attribute reflects the maximum of these two
trunkCost's.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.11.1.12 |
mscTrkPaNegotiatedAtmModeThis attribute gives the actual value of PathAdmin Atm mode that
the PathAdmin has decided on after negotiation with the far end
PathAdmin. This is only applicable to ATM cards since the mode on
non ATM hardware is not specified. The multiplexing mode implies
that all voice traffic will be multiplexed onto the Atm
atmConnection Vcc and all data will be multiplexed onto the Trunk
Atm atmConnection Vcc. The mapping mode implies that each
unique logical channel will be allocated its own Vcc. The mode
notApplicable implies either this is not ATM hardware or that no
Atm subcomponent exists under this or the peer PathAdmin.ro Enumeration .1.3.6.1.4.1.562.36.2.1.60.4.11.1.13 |
mscTrkPaNegotiatedTrunkDelayThis attribute gives the actual value of parent trunk's half round trip
delay (propagation delay) that the PathAdmin has decided on after
negotiation with the far end PathAdmin. If there is disagreement
between the two PathAdmins the larger of the two propagation
delays is chosen on both sides. This attribute reflects the maximum
of these two propagation delays.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.11.1.14 |
mscTrkPaNegotiatedTrunkTypeThis attribute gives the actual value of trunkType that the
PathAdmin has decided on after negotiation with the far end
PathAdmin. If there is disagreement between the two PathAdmin's
trunkType provisionable attributes the provisioned values are used
on both sides. That is, both sides maintain their provisioned value..ro Enumeration .1.3.6.1.4.1.562.36.2.1.60.4.11.1.15 |
mscTrkPaRbwTableThis attribute gives the total bandwidth reserved by paths for each
of five (5) holding priorities. For example the bandwidth used by
holdingPriority 0 paths is shown in the left most value. SEQUENCE OF MscTrkPaRbwEntry .1.3.6.1.4.1.562.36.2.1.60.4.214 |
mscTrkPaRbwEntryAn entry in the mscTrkPaRbwTable. MscTrkPaRbwEntry .1.3.6.1.4.1.562.36.2.1.60.4.214.1 |
mscTrkPaRbwIndexThis variable represents the index for the mscTrkPaRbwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.60.4.214.1.1 |
mscTrkPaRbwValueThis variable represents an individual value for the
mscTrkPaRbwTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.214.1.2 |
mscTrkPaPacntTableThis attribute gives the total number of path instantiation attempts
this trunk has processed since its creation. This number includes
successful and unsuccessful attempts. This attribute provides five
(5) values of this count, one for each path holdingPriority. SEQUENCE OF MscTrkPaPacntEntry .1.3.6.1.4.1.562.36.2.1.60.4.215 |
mscTrkPaPacntEntryAn entry in the mscTrkPaPacntTable. MscTrkPaPacntEntry .1.3.6.1.4.1.562.36.2.1.60.4.215.1 |
mscTrkPaPacntIndexThis variable represents the index for the mscTrkPaPacntTable. Integer32 .1.3.6.1.4.1.562.36.2.1.60.4.215.1.1 |
mscTrkPaPacntValueThis variable represents an individual value for the
mscTrkPaPacntTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.215.1.2 |
mscTrkPaPfcntTableThis attribute gives the total number of path instantiation failures
that have happened since the creation of this trunk. This attribute
provides five (5) values of this count, one for each path
holdingPriority. SEQUENCE OF MscTrkPaPfcntEntry .1.3.6.1.4.1.562.36.2.1.60.4.216 |
mscTrkPaPfcntEntryAn entry in the mscTrkPaPfcntTable. MscTrkPaPfcntEntry .1.3.6.1.4.1.562.36.2.1.60.4.216.1 |
mscTrkPaPfcntIndexThis variable represents the index for the mscTrkPaPfcntTable. Integer32 .1.3.6.1.4.1.562.36.2.1.60.4.216.1.1 |
mscTrkPaPfcntValueThis variable represents an individual value for the
mscTrkPaPfcntTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.216.1.2 |
mscTrkPaPccntTableThis attribute gives the total number of path clear requests this trunk
has processed since its creation. This attribute provides five (5)
values of this count, one for each path holdingPriority. SEQUENCE OF MscTrkPaPccntEntry .1.3.6.1.4.1.562.36.2.1.60.4.217 |
mscTrkPaPccntEntryAn entry in the mscTrkPaPccntTable. MscTrkPaPccntEntry .1.3.6.1.4.1.562.36.2.1.60.4.217.1 |
mscTrkPaPccntIndexThis variable represents the index for the mscTrkPaPccntTable. Integer32 .1.3.6.1.4.1.562.36.2.1.60.4.217.1.1 |
mscTrkPaPccntValueThis variable represents an individual value for the
mscTrkPaPccntTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.217.1.2 |
mscTrkPaPbcntTableThis attribute gives the total number of path bumping requests this
trunk has processed since its creation. This attribute provides 5
values of this count, one for each path holdingPriority. SEQUENCE OF MscTrkPaPbcntEntry .1.3.6.1.4.1.562.36.2.1.60.4.218 |
mscTrkPaPbcntEntryAn entry in the mscTrkPaPbcntTable. MscTrkPaPbcntEntry .1.3.6.1.4.1.562.36.2.1.60.4.218.1 |
mscTrkPaPbcntIndexThis variable represents the index for the mscTrkPaPbcntTable. Integer32 .1.3.6.1.4.1.562.36.2.1.60.4.218.1.1 |
mscTrkPaPbcntValueThis variable represents an individual value for the
mscTrkPaPbcntTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.4.218.1.2 |
mscTrkLCh OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.60.5 |
mscTrkLChRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscTrkLCh components. SEQUENCE OF MscTrkLChRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.5.1 |
mscTrkLChRowStatusEntryA single entry in the table represents a single
mscTrkLCh component. MscTrkLChRowStatusEntry .1.3.6.1.4.1.562.36.2.1.60.5.1.1 |
mscTrkLChRowStatusThis variable is used as the basis for SNMP naming of
mscTrkLCh components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.5.1.1.1 |
mscTrkLChComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.5.1.1.2 |
mscTrkLChStorageTypeThis variable represents the storage type value for the
mscTrkLCh tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.60.5.1.1.4 |
mscTrkLChIndexThis variable represents the index for the mscTrkLCh tables. Integer32 .1.3.6.1.4.1.562.36.2.1.60.5.1.1.10 |
mscTrkLChOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains all operational attributes pertaining to the
Logical Channel component owned by this trunk. SEQUENCE OF MscTrkLChOperEntry .1.3.6.1.4.1.562.36.2.1.60.5.10 |
mscTrkLChOperEntryAn entry in the mscTrkLChOperTable. MscTrkLChOperEntry .1.3.6.1.4.1.562.36.2.1.60.5.10.1 |
mscTrkLChNextHopThe nextHop is the name of the component across the bus which is
forwarding packets to us. Inversely the nextHop of our nextHop
component is us. More precisely, LCh/n components point to each
other across the bus via their nextHop attributes. In the case where
the next hop is an application the nextHop attribute will indicate the
component name of this application.ro RowPointer .1.3.6.1.4.1.562.36.2.1.60.5.10.1.2 |
mscTrkLChSetupPriorityThis attribute gives the priority at which a path is established. Zero
(0) is the highest priority and four (4) is the lowest. When PORS
establishes a path through the network, it uses the setupPriority
attribute to determine its potential for bumping established paths to
acquire their bandwidth. The holdingPriority, a complementary
attribute of this component, indicates the priority a path maintains
once it is established. A new path can bump an existing path if the
new path's setupPriority is higher (or numerically less) than the
existing path's holdingPriority.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.5.10.1.3 |
mscTrkLChHoldingPriorityThis attribute gives the priority that a path holds once it is
established. Zero (0) is the highest priority and four (4) is the
lowest. A path's holdingPriority determines its likelihood of being
bumped by a new path to acquire its bandwidth. The setupPriority, a
complementary attribute, indicates the priority of a path at
establishment time. A new path can bump an existing path if the
new path's setupPriority is higher (or numerically less) than the
existing path's holdingPriority.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.5.10.1.4 |
mscTrkLChEmissionPriorityThis attribute indicates the urgency with which packets on the
LCh's path are emitted by this trunk. The emissionPriority
translates into the trunk's emission queue. Zero (0) indicates the
highest emissionPriority, while three (3) indicates the lowest.
Packets with a higher emissionPriority (or numerically less) are put
on an emission queue which is serviced before a queue which
accepts packets of a lower emissionPriority and hence experience
smaller delays traversing congested trunks.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.5.10.1.5 |
mscTrkLChDiscardPriorityThis attribute indicates the importance of the packets on the path.
Zero (0) is used for paths carrying the most important traffic, and
two (3) is used for paths carrying the least important traffic. In times
of congestion, the discardPriority is used by packet forwarding on
the trunk to determine which packets are discarded first to reduce
the load. Packets with a higher discardPriority (or numerically less)
are discarded after packets with a lower discardPriority (or
numerically higher).ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.5.10.1.6 |
mscTrkLChRequiredTxBandwidthThis attribute gives the bandwidth (in bits per second units)
reserved by this LCh/n for emitting packets on the trunk.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.5.10.1.7 |
mscTrkLChRequiredRxBandwidthThis attribute gives the bandwidth (in bits per second units)
reserved by this LCh/n for receiving packets on the trunk.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.5.10.1.8 |
mscTrkLChModeThis attribute gives the operational mode of the LogicalChannel
component. It indicates what kind of transport is being performed
on the packets in the channel. There are 7 possible values of this
attribute as follows:
unknown - not currently in busy state, type of forwarding not
determined yet.
hdlcFrmMux - frames are being multiplexed (multiple LCh/n on
same port or channel) using HDLC encapsulation.
aal5FrmMux - frames are being multiplexed (multiple LCh/n on
same ATM VCC) using the AAL5 segmentation and recombination
protocol.
spoFrmMux - frames are being multiplexed (multiple LCh/n on
same ATM VCC) using the Short Path Oriented segmentation and
recombination protocol. This is a proprietary protocol which
encapsulates voice frames into a single ATM cell unlike AAL5
which would require two cells to transport the 45 byte voice frames.
aal5FrmMap - frames are being mapped (a single LCh/n per ATM
VCC) using the AAL5 segmentation and recombination protocol.
AAL5 mapped frames are forwarded by hardware in both directions
and require no CPU intervention.
spoFrmMap - frames are being mapped (a single LCh/n per ATM
VCC) using the Short Path Oriented segmentation and
recombination protocol. SPO mapped frames are forwarded by
hardware in both directions and require no CPU intervention in all
but one special case. In particular CPU is required only if frames
are being forwarded to an LCh/n whose mode is spoFrmMux.
cellMap - ATM cells are being relayed directly over the bus with no
segmentation and recombination protocol. The segmentation and
recombination is only done at transition points between frame based
cards and ATM cell based cards so this hop represents a pure
tandem cell hop, ATM card to ATM card. No CPU is required to
process these cells.ro Enumeration .1.3.6.1.4.1.562.36.2.1.60.5.10.1.9 |
mscTrkLChMaximumTransmissionUnitThis attribute gives the size of the largest frame this service will
send. A value of 0 means that the Mtu is unknown. A value of 45 or
less (but non zero) means that ATM single cell transport will be
used wherever possible. Otherwise ATM AAL5 adaption layer
transport will be required to handle all frames.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.60.5.10.1.10 |
mscTrkLChLocalConnectionThe localConnection attribute specifies the name of the connection
on the local interface. On ATM hardware this is in the form AtmIf/n
Vcc/x.y. On non ATM hardware this attribute is empty.ro RowPointer .1.3.6.1.4.1.562.36.2.1.60.5.10.1.11 |
porsTrunksMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.39 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.39 |
porsTrunksGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.39.1 |
porsTrunksGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.39.1.1 |
porsTrunksGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.39.1.1.3 |
porsTrunksGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.39.1.1.3.2 |
porsTrunksCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.39.3 |
porsTrunksCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.39.3.1 |
porsTrunksCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.39.3.1.3 |
porsTrunksCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.39.3.1.3.2 |