NetWare-Host-Ext-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for NetWare-Host-Ext-MIB.
107
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
107 total| Object Name |
|---|
novell OBJECT IDENTIFIER .1.3.6.1.4.1.23 |
RFC1155-SMI Unknown .1.3.6.1.4.1.23 |
mibDoc OBJECT IDENTIFIER .1.3.6.1.4.1.23.2 |
nwHostExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27 |
nwhrStorage OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2 |
nwhrStorageTypes OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1 |
nwhrStorageVolume OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.1 |
nwhrStorageMemoryPermanent OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.2 |
nwhrStorageMemoryAlloc OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.3 |
nwhrStorageCacheBuffers OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.4 |
nwhrStorageCacheMovable OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.5 |
nwhrStorageCacheNonMovable OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.6 |
nwhrStorageCodeAndDataMemory OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.7 |
nwhrStorageDOSMemory OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.8 |
nwhrStorageIOEngineMemory OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.9 |
nwhrStorageMSEngineMemory OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.10 |
nwhrStorageUnclaimedMemory OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.2.1.11 |
nwhrDevice OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.3 |
nwhrDeviceTypes OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.3.1 |
nwhrDeviceMirroredServerLink OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.3.1.1 |
nwhrDeviceTableExtensions to the (conceptual) table of devices
contained by the host SEQUENCE OF NwhrDeviceEntry .1.3.6.1.4.1.23.2.27.3.2 |
nwhrDeviceEntryExtensions to a (conceptual) entry for one device
contained by the host NwhrDeviceEntry .1.3.6.1.4.1.23.2.27.3.2.1 |
nwhrDeviceAdapterIndexThe index into the nwhrAdapterTable of the
adapter/controller to which this device is attached (or
physically manifested by, for logical device). Zero if
not applicable.ro INTEGER .1.3.6.1.4.1.23.2.27.3.2.1.1 |
nwhrDeviceControllerNumberThe controller number (relative to its adapter), or
the SCSI target ID, or zero if not applicable. Note
that zero is a valid value for both controller number
and SCSI Target ID.ro INTEGER .1.3.6.1.4.1.23.2.27.3.2.1.2 |
nwhrDeviceNumberThe device number (relative to its controller), or the
SCSI LUN (Logical Unit Number), or zero if not
applicable. Note that zero is a valid value for both
device number and SCSI LUN.ro INTEGER .1.3.6.1.4.1.23.2.27.3.2.1.3 |
nwhrProcessorCountThe number of processor devices contained in this
hostro INTEGER .1.3.6.1.4.1.23.2.27.3.3 |
nwhrPrinterCountThe number of printer devices contained in this hostro INTEGER .1.3.6.1.4.1.23.2.27.3.4 |
nwhrDiskStorageCountThe number of Disk Storage devices contained in this
host.ro INTEGER .1.3.6.1.4.1.23.2.27.3.5 |
nwhrDiskStorageTableExtensions to the hrDiskStorageTable SEQUENCE OF NwhrDiskStorageEntry .1.3.6.1.4.1.23.2.27.3.6 |
nwhrDiskStorageEntryExtensions to the hrDiskStorageEntry NwhrDiskStorageEntry .1.3.6.1.4.1.23.2.27.3.6.1 |
nwhrDiskStorageHeadsThe number of read/write heads on the drivero INTEGER .1.3.6.1.4.1.23.2.27.3.6.1.1 |
nwhrDiskStorageCylindersThe number of cylinders on the drive.ro INTEGER .1.3.6.1.4.1.23.2.27.3.6.1.2 |
nwhrDiskStorageSectorsPerTrackThe number of sectors per track on the drive.ro INTEGER .1.3.6.1.4.1.23.2.27.3.6.1.3 |
nwhrDiskStorageSectorSizeThe size of a sector in bytes.ro INTEGER .1.3.6.1.4.1.23.2.27.3.6.1.4 |
nwhrDiskStorageBlockSizeThe driver maximum I/O request size in bytes.ro INTEGER .1.3.6.1.4.1.23.2.27.3.6.1.5 |
nwhrPhysicalPartitionTableA table of physical partitions for long-term storage
devices contained by the host. SEQUENCE OF NwhrPhysicalPartitionEntry .1.3.6.1.4.1.23.2.27.3.7 |
nwhrPhysicalPartitionEntryAn entry for one partition. The hrDeviceIndex in the
index represents the entry in the hrDeviceTable that
corresponds to the nwhrPhysicalPartitionEntry. NwhrPhysicalPartitionEntry .1.3.6.1.4.1.23.2.27.3.7.1 |
nwhrPhysicalPartitionIndexA unique value for each physical partition on this
long-term storage device. The value for each long-term
storage device must remain constant from one re-
initialization of the agent to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.23.2.27.3.7.1.1 |
nwhrPhysicalPartitionTypeThe type of this physical partition.ro Enumeration .1.3.6.1.4.1.23.2.27.3.7.1.2 |
nwhrPhysicalPartitionDescrA textual description of this partition.ro InternationalDisplayString .1.3.6.1.4.1.23.2.27.3.7.1.3 |
nwhrPhysicalPartitionSizeThe size (in Kilobytes) of this physical partition.ro KBytes .1.3.6.1.4.1.23.2.27.3.7.1.4 |
nwhrHotfixTableThe table of hotfix areas of diskStorage devices
contained by the host.
Note that this table is potentially sparse: an entry
exists if the corresponding value of the hrDeviceType
object is `hrDeviceDiskStorage' and a NetWare partition
exists on the device. SEQUENCE OF NwhrHotfixEntry .1.3.6.1.4.1.23.2.27.3.8 |
nwhrHotfixEntryAn entry for one hotfix redirection area contained by
the host. NwhrHotfixEntry .1.3.6.1.4.1.23.2.27.3.8.1 |
nwhrHotfixUnitsThe size, in bytes, of the hotfix blocks.ro INTEGER .1.3.6.1.4.1.23.2.27.3.8.1.1 |
nwhrHotfixTotalThe size of the total hotfix redirection area
represented by this entry, in units of
nwhrHotfixUnits.ro INTEGER .1.3.6.1.4.1.23.2.27.3.8.1.2 |
nwhrHotfixUsedThe number of hotfix redirected blocks, i.e. the
number of bad blocks that hotfix has found.ro INTEGER .1.3.6.1.4.1.23.2.27.3.8.1.3 |
nwhrHotfixReservedThe number of hotfix redirection blocks reserved for
system use.ro INTEGER .1.3.6.1.4.1.23.2.27.3.8.1.4 |
nwhrAdapterCountThe number of adapters contained in this host.ro INTEGER .1.3.6.1.4.1.23.2.27.3.9 |
nwhrAdapterTableGeneral information for each adapter board in the
host: driver name and version, Interrupt, DMA, I/O
address, and number of attached devices. SEQUENCE OF NwhrAdapterEntry .1.3.6.1.4.1.23.2.27.3.10 |
nwhrAdapterEntryGeneral information for a particular adapter board in
the host: driver name and version, Interrupt, DMA, I/O
address, and number of attached devices. NwhrAdapterEntry .1.3.6.1.4.1.23.2.27.3.10.1 |
nwhrAdapterIndexA unique value for each adapter contained in the host.
The value for each adapter must remain constant at
least from one re-initialization of the agent to the
next re-initialization.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.1 |
nwhrAdapterTypeAn indication of the type of adapter. This will
typically be one of the possible values of
hrDeviceType.ro OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.3.10.1.2 |
nwhrAdapterDescrA description the hardware for this adapter. This
will usually include manufacturer, model, and version
information. For LAN adapters, this could include the
short board name and the boards burnt-in MAC address.ro InternationalDisplayString .1.3.6.1.4.1.23.2.27.3.10.1.3 |
nwhrAdapterDriverDescrA textual description of the driver for this adapterro InternationalDisplayString .1.3.6.1.4.1.23.2.27.3.10.1.4 |
nwhrAdapterDriverMajorVerThe major version number of the adapter driver.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.5 |
nwhrAdapterDriverMinorVerThe minor version number of the adapter driver.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.6 |
nwhrAdapterPort1The primary I/O port block. This is the base address
of a block of I/O addresses decoded by the adapter.
The value will be zero if there is no I/O address
associated with this adapter.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.7 |
nwhrAdapterPort1LenThe number of I/O ports in the block starting at
nwhrAdapterPort1. This value is used in conjunction
with nwhrAdapterPort1 to determine the I/O block used
by the adapter. The value will be zero if there is no
I/O address associated with this adapter.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.8 |
nwhrAdapterPort2The secondary I/O port block. This is the base
address of a block of I/O addresses decoded by the
adapter. The value will be zero if there is no
secondary I/O address associated with this adapter.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.9 |
nwhrAdapterPort2LenThe number of I/O ports in the block starting at
nwhrAdapterPort2. This value is used in conjunction
with nwhrAdapterPort2 to determine the secondary I/O
block used by the adapter. The value will be zero if
there is no I/O address associated with this adapter.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.10 |
nwhrAdapterMem1The primary Memory Address. This is the base address
of the primary block of memory space decoded by the
adapter. The value will be zero if there is no memory
address associated with this adapter.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.11 |
nwhrAdapterMem1LenThe length, in bytes, of the primary memory address
block. From this value and nwhrAdapterMem1, a
determination can be made as to which memory address
ranges are in use by the adapter.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.12 |
nwhrAdapterMem2The secondary Memory Address. This is the address of
the secondary block of memory space decoded by the
adapter. The value will be zero if there is no
secondary memory address associated with this adapter.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.13 |
nwhrAdapterMem2LenThe length, in bytes, of the secondary memory address
block. From this value and nwhrAdapterMem2, a
determination can be made as to which memory address
ranges are in use by the adapter.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.14 |
nwhrAdapterDMA1The primary DMA channel used by the adapter. The value
will be 255 if this adapter does not use any DMA
channel.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.15 |
nwhrAdapterDMA2The secondary DMA channel used by the adapter. The
value will be 255 if this adapter does not use a
secondary DMA channel.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.16 |
nwhrAdapterInterrupt1The primary interrupt vector used by the adapter. The
value will be 255 if this adapter does not use any
Interrupt.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.17 |
nwhrAdapterInterrupt2The secondary interrupt vector used by the adapter.
The value will be 255 if this adapter does not use a
secondary Interrupt.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.18 |
nwhrAdapterSlotThe slot in which the adapter resides. The value will
be zero if the slot information is not available on the
platform, such as an ISA based PC, otherwise the value
will be the slot number the adapter resides. The slot
number starts from 1.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.19 |
nwhrAdapterDevicesThe number of devices associated with this adapter.
For instance, the number of drives attached to a disk
controller.ro INTEGER .1.3.6.1.4.1.23.2.27.3.10.1.20 |
nwhrMslCountThe number of Mirrored Server Link (MSL) devices
contained in this host.ro INTEGER .1.3.6.1.4.1.23.2.27.3.11 |
nwhrMslTableThe (conceptual) table of Mirrored Server Link (MSL)
devices contained by the host.
Note that this table is potentially sparse: a
(conceptual) entry exists only if the corresponding
value of the hrDeviceType object is
nwhrDeviceMirroredServerLink SEQUENCE OF NwhrMslEntry .1.3.6.1.4.1.23.2.27.3.12 |
nwhrMslEntryA (conceptual) entry for one Mirrored Server Link
(MSL) device contained by the host. The hrDeviceIndex
in the index represents the entry in the hrDeviceTable
that corresponds to the nwhrMslEntry. NwhrMslEntry .1.3.6.1.4.1.23.2.27.3.12.1 |
nwhrMslStateThe current state of this MSL device.ro Enumeration .1.3.6.1.4.1.23.2.27.3.12.1.1 |
nwhrMslSpeedThe nominal bandwidth of the MSL link in bits per
second.ro INTEGER .1.3.6.1.4.1.23.2.27.3.12.1.2 |
nwhrMslSendsThe number of sends from this MSL device.ro Counter .1.3.6.1.4.1.23.2.27.3.12.1.3 |
nwhrMslReceivesThe number of receives by this MSL device.ro Counter .1.3.6.1.4.1.23.2.27.3.12.1.4 |
nwhrMslInErrorsThe number of errors in receives by this MSL device.ro Counter .1.3.6.1.4.1.23.2.27.3.12.1.5 |
nwhrMslOutErrorsThe number of errors on sends by this MSL device.ro Counter .1.3.6.1.4.1.23.2.27.3.12.1.6 |
nwhrPrinterTableA set of data for each accessible printer, whether
local or remote. SEQUENCE OF NwhrPrinterEntry .1.3.6.1.4.1.23.2.27.3.13 |
nwhrPrinterEntryA set of data for a particular printer. NwhrPrinterEntry .1.3.6.1.4.1.23.2.27.3.13.1 |
nwhrPrinterIDA unique value for each accessible printer. This
value will be constant for the lifetime of the
mapping.ro INTEGER .1.3.6.1.4.1.23.2.27.3.13.1.1 |
nwhrPrinterTypeThe type of the printer.ro Enumeration .1.3.6.1.4.1.23.2.27.3.13.1.2 |
nwhrPrinterLocalNameThe local name for the printer.ro InternationalDisplayString .1.3.6.1.4.1.23.2.27.3.13.1.3 |
nwhrPrinterQueueNameThe name of the print queue associated with this
printer. Zero length string if printer is local.ro InternationalDisplayString .1.3.6.1.4.1.23.2.27.3.13.1.4 |
nwhrPrinterServerNameThe name of the server containing the print queue.
Zero length string if printer is local.ro InternationalDisplayString .1.3.6.1.4.1.23.2.27.3.13.1.5 |
nwhrPrinterTransportDomainThe transport domain associated with the printer
(print queue).ro TransportDomain .1.3.6.1.4.1.23.2.27.3.13.1.6 |
nwhrPrinterTransportAddressThe transport address associated with this printer
(print queue). Zero length string if printer is
local.ro TransportAddress .1.3.6.1.4.1.23.2.27.3.13.1.7 |
nwhrPrinterDeviceIndexThe value of hrDeviceIndex for this printer. Zero if
non-local.ro INTEGER .1.3.6.1.4.1.23.2.27.3.13.1.8 |
nwhrOdi OBJECT IDENTIFIER .1.3.6.1.4.1.23.2.27.10 |
nwhrLslOutPktsThe total number of of SendPacket requests made to the
LSL.ro Counter .1.3.6.1.4.1.23.2.27.10.1 |
nwhrLslInPktsThe total number of GetStackECB requests made by MLIDs
to the LSL.ro Counter .1.3.6.1.4.1.23.2.27.10.2 |
nwhrLslUnclaimedPktsThe total number of times a packet was received and
not consumed by a protocol stack.ro Counter .1.3.6.1.4.1.23.2.27.10.3 |
nwhrProtocolTableThe Protocol Table provides basic information about
protocols running in the host, management stations
should refer to the appropriate protocol MIBs for the
details about each protocol. SEQUENCE OF NwhrProtocolEntry .1.3.6.1.4.1.23.2.27.10.4 |
nwhrProtocolEntryInformation about a particular protocol. NwhrProtocolEntry .1.3.6.1.4.1.23.2.27.10.4.1 |
nwhrProtocolNameThe protocol name, for example, IPX, IP, ARP.ro InternationalDisplayString .1.3.6.1.4.1.23.2.27.10.4.1.1 |
nwhrProtocolIDThe protocol identifier For example:
000000000800 - IP for Ethernet II
00080007809B - AppleTalk for Ethernet SNAPro OCTET STRING .1.3.6.1.4.1.23.2.27.10.4.1.2 |
nwhrProtocolAddressThis object provides protocol address information, for
example, the Network Address on IPX network, the IP
address on IP network. Note there is no format in the
InternationalDisplayString and the information is not
guaranteed available.ro InternationalDisplayString .1.3.6.1.4.1.23.2.27.10.4.1.3 |
nwhrProtocolOutPktsThe total number of send packet requests made to the
LSL.ro Counter .1.3.6.1.4.1.23.2.27.10.4.1.4 |
nwhrProtocolInPktsThe total number of incoming packets that were
consumed by the protocol.ro Counter .1.3.6.1.4.1.23.2.27.10.4.1.5 |
nwhrProtocolIgnoredPktsThe total number of times the protocol receive handler
was called with look ahead and the protocol did not
return a receive ECB to the MLID to receive the packetro Counter .1.3.6.1.4.1.23.2.27.10.4.1.6 |
nwhrProtocolFullNameThe full name of the protocol name, for example,
'DOD Internet Protocol'.ro InternationalDisplayString .1.3.6.1.4.1.23.2.27.10.4.1.7 |
nwhrIfTableExtensions to MIB-II's Interfaces table to add some
NetWare specific info. SEQUENCE OF NwhrIfEntry .1.3.6.1.4.1.23.2.27.10.5 |
nwhrIfEntryNetWare specific info for a particular interface. NwhrIfEntry .1.3.6.1.4.1.23.2.27.10.5.1 |
nwhrIfLogicalBoardNumberThe logical board number.ro INTEGER .1.3.6.1.4.1.23.2.27.10.5.1.1 |
nwhrIfFrameTypeThe frame type for this logical board.ro InternationalDisplayString .1.3.6.1.4.1.23.2.27.10.5.1.2 |
nwhrIfLogicalBoardNameThe name assigned to this logical board.ro InternationalDisplayString .1.3.6.1.4.1.23.2.27.10.5.1.3 |