NULL
Detailed view of the defined objects, syntax rules, and hierarchical paths.
84
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
84 total| Object Name |
|---|
RFC1155-SMIThe ncm idcsu configuration table. SEQUENCE OF NcmidcsuConfigEntry .1.3.6.1.4.1.321.1.3027.10000 |
ncmidcsuThresholdIntervalTableThe ncm idcsu threshold interval table. SEQUENCE OF NcmidcsuThresholdIntervalEntry .1.3.6.1.4.1.321.1.3027.10001 |
ncmidcsuThresholdIntervalEntryAn entry in the ncmidcsu threshold interval table. NcmidcsuThresholdIntervalEntry .1.3.6.1.4.1.321.1.3027.10001.1 |
ncmidcsuThresholdNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3027.10001.1.1 |
ncmidcsuThresholdIntervalIndexro INTEGER .1.3.6.1.4.1.321.1.3027.10001.1.2 |
ncmidcsuBERThresholdThe ncmidcsu Net/Eq ber threshold.rw Enumeration .1.3.6.1.4.1.321.1.3027.10001.1.3 |
ncmidcsubpvSecThresholdThe ncmidcsu Net/Eq bpv sec threshold.rw INTEGER .1.3.6.1.4.1.321.1.3027.10001.1.4 |
ncmidcsubpvSecIntervalThe ncmidcsu Net/Eq bpv sec interval.rw INTEGER .1.3.6.1.4.1.321.1.3027.10001.1.5 |
ncmidcsuESThresholdThe ncmidcsu Net/Eq es threshold.rw INTEGER .1.3.6.1.4.1.321.1.3027.10001.1.6 |
ncmidcsuESIntervalThe ncmidcsu Net/Eq es interval.rw INTEGER .1.3.6.1.4.1.321.1.3027.10001.1.7 |
ncmidcsuUASThresholdThe ncmidcsu Net/Eq uas threshold.rw INTEGER .1.3.6.1.4.1.321.1.3027.10001.1.8 |
ncmidcsuUASIntervalThe ncmidcsu Net/Eq uas interval.rw INTEGER .1.3.6.1.4.1.321.1.3027.10001.1.9 |
ncmidcsuConfigOneTableThe ncm idcsu configuration table1. SEQUENCE OF NcmidcsuConfigOneEntry .1.3.6.1.4.1.321.1.3027.10002 |
ncmidcsuConfigOneEntryAn entry in the ncmidcsu configuration table1. NcmidcsuConfigOneEntry .1.3.6.1.4.1.321.1.3027.10002.1 |
ncmidcsucfg1NIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3027.10002.1.1 |
ncmidcsuLineIndex1ro INTEGER .1.3.6.1.4.1.321.1.3027.10002.1.2 |
ncmidcsuDS0ChannelThis variable indicates the channel assignment for the
dsu for the port.rw DisplayString .1.3.6.1.4.1.321.1.3027.10002.1.3 |
ncmidcsuRLBTimeoutIndexThe ncmidcsu rlb timeout index.rw INTEGER .1.3.6.1.4.1.321.1.3027.10002.1.4 |
ncmidcsuNetLofcIndexTimeThe net lofc index time .rw INTEGER .1.3.6.1.4.1.321.1.3027.10002.1.5 |
ncmidcsuTimingThe ncmidcsu timing.rw Enumeration .1.3.6.1.4.1.321.1.3027.10002.1.6 |
ncmidcsuLineCodeThe ncmidcsu net/eq Line Code.rw Enumeration .1.3.6.1.4.1.321.1.3027.10002.1.7 |
ncmidcsuModeThe ncmidcsu data transmission mode for the DS-0s channel.rw Enumeration .1.3.6.1.4.1.321.1.3027.10002.1.8 |
ncmidcsuClockThe ncmidcsu clock for the data port.rw Enumeration .1.3.6.1.4.1.321.1.3027.10002.1.9 |
ncmidcsuScrambleThe ncmidcsu data scrambling option .rw Enumeration .1.3.6.1.4.1.321.1.3027.10002.1.10 |
ncmidcsuLosLeadThis variable indicates the DTE lead bits
for port. The DTE leads can be set by setting the relevant
bit to 1 and reset by setting the relevant bit to zero.
Bit Value Name Description
0 set the dsu port configuration to zero
0 1 DTR set uses DTR
1 2 RTS set uses RTS
2 4 DSR set uses DSR
3 8 CTS set uses CTS
4 16 DCD set uses DCD
5 32 LOS use both bits: bits set to use for alarm
6 64 LOS 0 = Disable LOS detect, 1=use RTS , 2 = DTR
7 128 DDSMode set for 56k DDS .rw INTEGER .1.3.6.1.4.1.321.1.3027.10002.1.11 |
ncmidcsuPortLoopEnableThe Port Loop Enable of the dsu of idscsu .rw Enumeration .1.3.6.1.4.1.321.1.3027.10002.1.12 |
ncmidcsuDataInvertThis variable specifies the data invert for idscsu .rw Enumeration .1.3.6.1.4.1.321.1.3027.10002.1.13 |
ncmidcsuTimingUnitThis variable specifies if the DSU port is configured as timing unit for idscsu .rw Enumeration .1.3.6.1.4.1.321.1.3027.10002.1.14 |
ncmidcsuAlarmReportingThis variable specifies if the DSU port has to report Alarm to the SAM for ncmidcsu.rw Enumeration .1.3.6.1.4.1.321.1.3027.10002.1.15 |
ncmidcsuDiagnosticTableThe ncm idcsu diagnostic table. SEQUENCE OF NcmidcsuDiagnosticEntry .1.3.6.1.4.1.321.1.3027.10003 |
ncmidcsuDiagnosticEntryAn entry in the ncmidcsu diagnostic table. NcmidcsuDiagnosticEntry .1.3.6.1.4.1.321.1.3027.10003.1 |
ncmidcsuDiagNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3027.10003.1.1 |
ncmidcsuDiagnosticIndexro INTEGER .1.3.6.1.4.1.321.1.3027.10003.1.2 |
ncmidcsuAlarmSetDelayThe ncmidcsu alarm set delay.rw INTEGER .1.3.6.1.4.1.321.1.3027.10003.1.3 |
ncmidcsuAlarmClearDelayThe ncmidcsu alarm clear delay.rw INTEGER .1.3.6.1.4.1.321.1.3027.10003.1.4 |
ncmidcsuAlarmEnableThe ncmidcsu alarm reporting.rw Enumeration .1.3.6.1.4.1.321.1.3027.10003.1.5 |
ncmidcsuLoopbackThe ncmidcsu loop back config.rw Enumeration .1.3.6.1.4.1.321.1.3027.10003.1.6 |
ncmdteloopsThe dte loops of the ncmidcsu .rw Enumeration .1.3.6.1.4.1.321.1.3027.10003.1.7 |
ncmidcsuTestPatternThe ncmidcsu test pattern config.rw Enumeration .1.3.6.1.4.1.321.1.3027.10003.1.8 |
ncmidcsuResetPerfRegThe ncmcsu reset performance monitoring registerrw Enumeration .1.3.6.1.4.1.321.1.3027.10003.1.9 |
ncmidcsuTestErrorCounterThe ncm idcsu test error counter in the test statusro Gauge .1.3.6.1.4.1.321.1.3027.10003.1.10 |
ncmidcsuTestSecondsRemainThe ncm idcsu test seconds remaining in the test statusro Gauge .1.3.6.1.4.1.321.1.3027.10003.1.11 |
ncmidcsuTestTimeSecondsThe idcsu test time duration. Enter Value (0-142, 255)
0 corresponds to 0 Sec (Default)
1 - 59 corresponds to 1-59 Seconds
60 - 118 corresponds to 1-59 Min
119 - 142 corresponds to 1-24 HR
255 corresponds to (Forever) optionrw INTEGER .1.3.6.1.4.1.321.1.3027.10003.1.12 |
ncmidcsuNetLOFCIndexTimeThe idcsu net lofc index timerw INTEGER .1.3.6.1.4.1.321.1.3027.10003.1.13 |
ncmidcsuChannelMaskThe idcsu channel mask for the 24 channelsrw DisplayString .1.3.6.1.4.1.321.1.3027.10003.1.14 |
ncmidcsuApplicationThe idcsu application moderw Enumeration .1.3.6.1.4.1.321.1.3027.10003.1.15 |
ncmidcsuTestIntervalIndexThe idcsu Test Inteval Index value used for test pattern (0 - config default).rw INTEGER .1.3.6.1.4.1.321.1.3027.10003.1.16 |
ncmidcsuConfigEntryAn entry in the ncmidcsu configuration table. NcmidcsuConfigEntry .ncmidcsuConfigTable.1 |
ncmidcsucfgNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .ncmidcsuConfigTable.1.1 |
ncmidcsuLineIndexro INTEGER .ncmidcsuConfigTable.1.2 |
ncmidcsuNetLineBuildOutThe ncmidcsu net line build out.rw Enumeration .ncmidcsuConfigTable.1.3 |
ncmidcsuNetworkKeepAliveThe ncmidcsu network keep alive varaible .rw Enumeration .ncmidcsuConfigTable.1.4 |
ncmidcsuExcessiveErrorThe Net/Eq has excessive errors.rw Enumeration .ncmidcsuConfigTable.1.5 |
ncmidcsuOutOfFrameThe ncmidcsu Eq is out of frame (OOF).rw Enumeration .ncmidcsuConfigTable.1.6 |
ncmidcsuFormatThe ncmidcsu Net/Eq format.rw Enumeration .ncmidcsuConfigTable.1.7 |
ncmidcsuNetDensityEnforcementThe ncmidcsu net density enforcement.rw Enumeration .ncmidcsuConfigTable.1.8 |
ncmidcsuNetLossOfSignalThe ncmidcsu Net/Eq uas interval.ro INTEGER .ncmidcsuConfigTable.1.9 |
ncmidcsuJitterBufThe ncmidcsu Net/Eq Jitter buffer in bits.rw Enumeration .ncmidcsuConfigTable.1.10 |
ncmidcsuTestSigCfgEnablebit 1 of MSGOUT+47 for read or of MSGIN+47 for write is test signal enable
in this test signal configuration message.rw Enumeration .ncmidcsuConfigTable.1.11 |
ncmidcsuTestSigCfgFrameSignalbit 7 of MSGOUT+47 for read or of MSGIN+47 for write is frame test signal
in this test signal configuration message.rw Enumeration .ncmidcsuConfigTable.1.12 |
ncmidcsuCfgRptSendPRMbit 0 of MSGOUT+52 for read or MSGIN+52 for write is send prm
in this configure report message.rw Enumeration .ncmidcsuConfigTable.1.13 |
ncmidcsuCfgRptPollFarEndbit 1 of MSGOUT+52 for read or MSGIN+52 for write is poll far end
in this configure report message.rw Enumeration .ncmidcsuConfigTable.1.14 |
ncmidcsuCfgRptDataLinkUnsolicitbit 2 of MSGOUT+52 for read or MSGIN+52 for write is data link unsolicited
report
in this configure report message.rw Enumeration .ncmidcsuConfigTable.1.15 |
ncmidcsuCfgRptAlmReportingbit 3 of MSGOUT+52 for read or MSGIN+52 for write is alarm reporting
in this configure report message.rw Enumeration .ncmidcsuConfigTable.1.16 |
ncmidcsuCfgRptPRMTypebit 4,5 of MSGOUT+52 for read or of MSGIN+52 for write is PRM type
in this configure report message.rw Enumeration .ncmidcsuConfigTable.1.17 |
ncmidcsuCfgCodeRegenCRCbit 0,1 of MSGOUT+53 for read or MSGIN+53 for write is regenerate
crc from net to dte or eq to net in this configure coding message.rw Enumeration .ncmidcsuConfigTable.1.18 |
ncmidcsuCfgCodeXYellowAlarmbit 2,3 of MSGOUT+53 for read or MSGIN+53 for write is transcode yellow
alarm from net to dte or eq to net in this configure coding message.rw Enumeration .ncmidcsuConfigTable.1.19 |
ncmidcsuCfgCodeEQFIFObit 4 of MSGOUT+53 for read or MSGIN+53 for write is eq fifo
in this configure coding message.rw Enumeration .ncmidcsuConfigTable.1.20 |
ncmidcsuCfgCodeNETFIFObit 5 of MSGOUT+53 for read or MSGIN+53 for write is net fifo
in this configure coding message.rw Enumeration .ncmidcsuConfigTable.1.21 |
ncmidcsuCfgCodeTranModebit 6 of MSGOUT+53 for read or MSGIN+53 for write is transparent
mode in this configure report message.rw Enumeration .ncmidcsuConfigTable.1.22 |
ncmidcsuCfgCodeSend1sLnkIdlebit 7 of MSGOUT+53 for read or MSGIN+53 for write is send ones
data link idle code in this configure report message.rw Enumeration .ncmidcsuConfigTable.1.23 |
ncmidcsuCfgAlmSelfTestbit 0 of MSGOUT+54 for read or MSGIN+54 for write is enable
power up self test in this configure alarm message.rw Enumeration .ncmidcsuConfigTable.1.24 |
ncmidcsuCfgAlmEnableTestStatebit 1 of MSGOUT+54 for read or MSGIN+54 for write is enable
alarms in test state in this configure alarm message.rw Enumeration .ncmidcsuConfigTable.1.25 |
ncmidcsuCfgAlmUnframedModebit 2 of MSGOUT+54 for read or MSGIN+54 for write is
alarms in unframe mode in this configure alarm message.rw Enumeration .ncmidcsuConfigTable.1.26 |
ncmidcsuCfgAlmOnEqLoopbit 3 of MSGOUT+54 for read or MSGIN+54 for write is alarm
on eq loop loop in this configure alarm message.rw Enumeration .ncmidcsuConfigTable.1.27 |
ncmidcsuCfgAlmOnNetLoopbit 4 of MSGOUT+54 for read or MSGIN+54 for write is alarm
on net loop in this configure alarm message.rw Enumeration .ncmidcsuConfigTable.1.28 |
ncmidcsuCfgAlmOnPowerUpLoopbit 5 of MSGOUT+54 for read or MSGIN+54 for write is alarm
power up loop in this configure alarm message.rw Enumeration .ncmidcsuConfigTable.1.29 |
ncmidcsuCfgLoopRespLLBbit 0 of MSGOUT+55 for read or MSGIN+55 for respond to LLB
in this configure Loop Response Message.rw Enumeration .ncmidcsuConfigTable.1.30 |
ncmidcsuCfgLoopRespPLBbit 1 of MSGOUT+55 for read or MSGIN+55 for respond to PLB
in this configure Loop Response Message.rw Enumeration .ncmidcsuConfigTable.1.31 |
ncmidcsuCfgLoopRespELBbit 2 of MSGOUT+55 for read or MSGIN+55 for respond to ELB
in this configure Loop Response Message.rw Enumeration .ncmidcsuConfigTable.1.32 |
ncmidcsuCfgLoopRespRLBbit 3 of MSGOUT+55 for read or MSGIN+55 for respond to RLB
in this configure Loop Response Message.rw Enumeration .ncmidcsuConfigTable.1.33 |
ncmidcsuCfgLoopRespLLBTONEbit 4 of MSGOUT+55 for read or MSGIN+55 for respond to LLB (T1.403)
in this configure Loop Response Message.rw Enumeration .ncmidcsuConfigTable.1.34 |
ncmidcsuCfgLoopRespPLBTONEbit 5 of MSGOUT+55 for read or MSGIN+55 for respond to PLB (T1.403)
in this configure Loop Response Message.rw Enumeration .ncmidcsuConfigTable.1.35 |
ncmidcsuCfgSendReceiveInBandCodebit 6 of MSGOUT+55 for read or MSGIN+55 for enable to Send/Receive
of in-band code.rw Enumeration .ncmidcsuConfigTable.1.36 |
More MIBs from Verilink
Browse all VerilinkMIBs →VERILINK-ENTERPRISE-NCMGENERIC-MIB
SNMP MIB module
764 objects→
IPADv2-MIB
The IPADv2-MIB module facilitates the monitoring and management of IP Address Allocation and De-allocation (IPAD) events within network infrastructure, specifically tracking the assignment status, lease duration, and utilization of IP address pools via SNMPv2. This module enables administrators to audit dynamic address distribution, detect allocation conflicts, and verify the operational state of DHCP or IPAM services across compliant network devices.
629 objects→
VERILINK-ENTERPRISE-NCMALARM-MIB
Standard SNMP MIB module defining data structures for VERILINK-ENTERPRISE-NCMALARM-MIB.
574 objects→
DS8200v2-MIB
SNMP MIB module
446 objects→
VERILINK-ENTERPRISE-CSUNCM-MIB
SNMP MIB module
290 objects→
IPAD-MIB
Standard SNMP MIB module defining data structures for IPAD-MIB.
284 objects→