NTN-QOS-POLICY-EVOL-PIB
An Avaya Network's management module containing data definitions related to QoS components and services supported by network devices.
Main OID:
ntnQosPolicyEvolPib.1.3.6.1.4.1.1754.1.1.7.11.7
631
Objects
Active
Status
13
Dependencies
Imported Objects
Objects
631 total| Object Name |
|---|
ntnQosPolicyEvolPibAn Avaya Network's management module containing
data definitions related to QoS components and
services supported by network devices. MODULE-IDENTITY .1.3.6.1.4.1.1754.1.1.7.11.7 |
ntnQosPolicyEvolPibClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1 |
ntnQosInterfaceTypeTableInterface type definitions. This class describes the types
of interfaces that exist on the device. An interface type
is denoted by its designated role identifier. SEQUENCE OF NtnQosInterfaceTypeEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.1 |
ntnQosInterfaceTypeEntryAn instance of this class describes the characteristics
of a type of an interface. Interface type characteristics
include a role combination identifier, an interface class
designation and a filter capabilities attribute. An
instance is required for each different unique role
combination identifier which represents the different
interface types that are operational in the device at
any given time. The PEP does not report which specific
interfaces have which characteristics. NtnQosInterfaceTypeEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.1.1 |
ntnQosInterfaceTypeIdAn arbitrary integer index that uniquely identifies a
instance of the ntnQosInterfaceType class. Class instances
may not be contiguous. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.1.1.1 |
ntnQosInterfaceTypeRolesThe role combination that is used to identify interfaces
with the characteristics specified by the attributes
of this class instance. Interface role combination
identifiers are used within a number of classes to
logically identify a physical set of interfaces to which
policy rules and actions are applied. Role combination
identifiers must exist in this table prior to being
referenced in other class instances.rw RoleCombination (POLICY-FRAMEWORK-PIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.1.1.2 |
ntnQosInterfaceTypeIfClassA value describing the overall classification of
traffic received on interfaces with the given role
combination. Traffic received on trusted interfaces
may be processed differently and be subject
to different restrictions that traffic received on
non-trusted interfaces. The treatment of traffic
based on interface class is implementation dependent.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.1.1.3 |
ntnQosInterfaceTypeCapabilitiesAn enumeration of interface capabilities. Used by the
PDP or network manager to select which policies and
configuration it should push to the PEP.rw Bits .1.3.6.1.4.1.1754.1.1.7.11.7.1.1.1.4 |
ntnQosInterfaceTypeStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosInterfaceTypeStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.1.1.5 |
ntnQosInterfaceTypeStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.1.1.6 |
ntnQosQsetPriAssignmentTableSupports the assignment of 802.1p user priority
values to a queue for each interface with a specific
queue set. There will be 8 instances of this class
for each supported queue set. SEQUENCE OF NtnQosQsetPriAssignmentEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.2 |
ntnQosQsetPriAssignmentEntryAn instance of the ntnQosQsetPriAssignment class. NtnQosQsetPriAssignmentEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.2.1 |
ntnQosQsetPriAssignmentIdAn index that is used to uniquely identify the
instance of the ntnQosQsetPriAssignment class. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.2.1.1 |
ntnQosQsetPriAssignmentQsetThe queue set with which an interface must be
configured to support the Pri-to-queue assignment
described by this instance. The specified queue
set must be defined in the ntnQosIfQueueTable prior
to being referenced by this entry. Otherwise a
'priAssociationUnknown(3)' error code will be
returned.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.2.1.2 |
ntnQosQsetPriAssignmentPriThe 802.1p user priority to which this class
instance applies.rw QosIeee802Cos .1.3.6.1.4.1.1754.1.1.7.11.7.1.2.1.3 |
ntnQosQsetPriAssignmentQueueThe specific queue, within the queue set that is
associated with the interface set identified by the
ntnQosQsetPriAssignmentRoles tag, on which traffic
with the specified user priority, dictated by the
ntnQosQsetPriAssignmentPri value, is placed. Failure
to specify an appropriate queue results in a
'priAssociationConflict(4)' error indication being
returned.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.2.1.4 |
ntnQosQsetPriAssignmentStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosQsetPriAssignmentStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.2.1.5 |
ntnQosQsetPriAssignmentStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.2.1.6 |
ntnQosQsetDscpAssignmentTableSupports the assignment of DSCP values to
a queue for each interface with a specific
queue set. There will be 64 instances of this
class for each supported queue set. SEQUENCE OF NtnQosQsetDscpAssignmentEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.3 |
ntnQosQsetDscpAssignmentEntryAn instance of the ntnQosQsetDscpAssignment class. NtnQosQsetDscpAssignmentEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.3.1 |
ntnQosQsetDscpAssignmentIdAn index that is used to uniquely identify the
instance of the ntnQosQsetDscpAssignment class. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.3.1.1 |
ntnQosQsetDscpAssignmentQsetThe queue set with which an interface must be
configured to support the Dscp-to-queue assignment
described by this instance. The specified queue
set must be defined in the ntnQosIfQueueTable prior
to being referenced by this entry. Otherwise a
'priAssociationUnknown(3)' error code will be
returned.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.3.1.2 |
ntnQosQsetDscpAssignmentDscpThe DSCP value to which this class
instance applies.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.3.1.3 |
ntnQosQsetDscpAssignmentQueueThe specific queue, within the queue set that is
associated with the interface set identified by the
ntnQosQsetDscpAssignmentRoles tag, on which traffic
with the specified user priority, dictated by the
ntnQosQsetDscpAssignmentDscp value, is placed. Failure
to specify an appropriate queue results in a
'priAssociationConflict(4)' error indication being
returned.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.3.1.4 |
ntnQosQsetDscpAssignmentStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosQsetDscpAssignmentStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.3.1.5 |
ntnQosQsetDscpAssignmentStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.3.1.6 |
ntnQosShapingParamsTableSupports the definition of shaping parameters
that can be applied to individual flows. Shaping
criteria is associated with a flow using the
qosTargetShaper attribute of the qosTarget class. SEQUENCE OF NtnQosShapingParamsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.4 |
ntnQosShapingParamsEntryAn instance of the ntnQosShapingParams class. NtnQosShapingParamsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.4.1 |
ntnQosShapingParamsIdAn index that is used to uniquely identify the
instance of the ntnQosShapingParams class. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.4.1.1 |
ntnQosShapingParamsRateThe maximum rate, in kilobits per second, at which
traffic shaped using this rate criteria will be transmitted
over a given period of time. Transmitted traffic may
exceed this rate for short periods in accordance with
the associated burst size. Typically, this value specifies
the rate at which tokens are added to a token bucket
used to shape flows.
This object specifies a rate in kilobits per second
units such that, for example, a value of 100 equates
to a shaped flow being transmitted at a maximum rate
of 100,000 bits per second.rw Unsigned32 (0..'ffffffff'h) .1.3.6.1.4.1.1754.1.1.7.11.7.1.4.1.2 |
ntnQosShapingParamsBurstSizeThe maximum traffic burst size, in bytes, that can
be transmitted without experiencing a shaping delay.
Typically, this value represents the maximum number
of tokens in a token bucket.
Note that the value of this attribute may modified
in an implementation dependent, such as being rounded
down to an acceptable value, to account for system
limitations.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.4.1.3 |
ntnQosShapingParamsQueueSizeThe amount of traffic, in packets, that may exceed the
maximum burst size and still be queued for transmission.
This value specifies the size of a shaping queue that
holds a flow's traffic that is being delayed for shaping
purposes. The specified enumeration dictates whether one
('onePkt'), two ('twoPkts'), four ('fourPkts'), eight,
('eightPkts') or sixteen ('sixteenPkts') packets can be
held in the shaping queue prior to transmission.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.4.1.4 |
ntnQosShapingParamsStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosQsetDscpAssignmentStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.4.1.5 |
ntnQosShapingParamsStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.4.1.6 |
ntnQosShapingParamsLabelA label used to reference the entry in a textual manner.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.4.1.7 |
ntnClassifierClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.5 |
ntnDsMultiFieldClfrNextFreeThis object contains an unused value for
ntnDsMultiFieldClfrId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.1 |
ntnDsMultiFieldClfrTableA table of IP Multi-Field Classifier filter
entries that a system may use to identify IP
traffic. SEQUENCE OF NtnDsMultiFieldClfrEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2 |
ntnDsMultiFieldClfrEntryAn IP Multi-Field Classifier entry describes
a single filter. NtnDsMultiFieldClfrEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1 |
ntnDsMultiFieldClfrIdAn index that enumerates the Multi-Field
Classifier filter entries. Managers obtain
new values for row creation in this table by
reading ntnDsMultiFieldClfrNextFree.
Version 1/2 attribute. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.1 |
ntnDsMultiFieldClfrAddrTypeThe type of IP address used by this classifier
entry. While other types of addresses are
defined in the InetAddressType textual convention,
and DNS names, a classifier can only look at
packets on the wire. Therefore, this object is
limited to IPv4 and IPv6 addresses, with the exception
of releases that support the logging of martian packets.
Instead of IPv4z and IPv6z, the martian variants of IPv4
and IPv6 are used.
Version 1/2 attribute.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.2 |
ntnDsMultiFieldClfrDstAddrThe IP address to match against the packet's
destination IP address. This may not be a DNS
name, but may be an IPv4 or IPv6 prefix.
ntnDsMultiFieldClfrDstPrefixLength indicates the
number of bits that are relevant.
Version 1/2 attribute.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.3 |
ntnDsMultiFieldClfrDstPrefixLengthThe length of the CIDR Prefix carried in
ntnDsMultiFieldClfrDstAddr. In IPv4 addresses,
a length of 0 indicates a match of any address;
a length of 32 indicates a match of a single
host address, and a length between 0 and 32
indicates the use of a CIDR Prefix. IPv6 is
similar, except that prefix lengths range
from 0..128.
Version 1/2 attribute.rw InetAddressPrefixLength UNITS "bits" .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.4 |
ntnDsMultiFieldClfrSrcAddrThe IP address to match against the packet's
source IP address. This may not be a DNS name,
but may be an IPv4 or IPv6 prefix.
ntnDsMultiFieldClfrSrcPrefixLength indicates
the number of bits that are relevant.
Version 1/2 attribute.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.5 |
ntnDsMultiFieldClfrSrcPrefixLengthThe length of the CIDR Prefix carried in
ntnDsMultiFieldClfrSrcAddr. In IPv4 addresses,
a length of 0 indicates a match of any address;
a length of 32 indicates a match of a single host
address, and a length between 0 and 32 indicates
the use of a CIDR Prefix. IPv6 is similar,
except that prefix lengths range from 0..128.
Version 1/2 attribute.rw InetAddressPrefixLength UNITS "bits" .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.6 |
ntnDsMultiFieldClfrDscpThe value that the DSCP in the packet must
have to match this entry. A value of -1
indicates that a specific DSCP value has not
been defined and thus all DSCP values are
considered a match.
Version 1/2 attribute.rw DscpOrAny (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.7 |
ntnDsMultiFieldClfrFlowIdThe flow identifier in an IPv6 header.
Version 1/2 attribute.rw FlowIdOrAny .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.8 |
ntnDsMultiFieldClfrProtocolThe IP protocol to match against the IPv4
protocol number or the IPv6 Next-Header number
in the packet. A value of 255 means match all.
Note the protocol number of 255 is reserved by
IANA, and Next-Header number of 0 is used in
IPv6.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.9 |
ntnDsMultiFieldClfrDstL4PortMinThe minimum value that the layer-4 destination
port number in the packet must have in order
to match this classifier entry.
Version 1/2 attribute.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.10 |
ntnDsMultiFieldClfrDstL4PortMaxThe maximum value that the layer-4 destination
port number in the packet must have in order
to match this classifier entry. This value must
be equal to or greater than the value specified
for this entry in ntnDsMultiFieldClfrDstL4PortMin.
Version 1/2 attribute.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.11 |
ntnDsMultiFieldClfrSrcL4PortMinThe minimum value that the layer-4 source
port number in the packet must have in order
to match this classifier entry.
Version 1/2 attribute.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.12 |
ntnDsMultiFieldClfrSrcL4PortMaxThe maximum value that the layer-4 source
port number in the packet must have in order
to match this classifier entry. This value
must be equal to or greater than the value
specified for this entry in
ntnDsMultiFieldClfrSrcL4PortMin.
Version 1/2 attribute.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.13 |
ntnDsMultiFieldClfrStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.
Version 1/2 attribute.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.14 |
ntnDsMultiFieldClfrStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/2 attribute.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.15 |
ntnDsMultiFieldClfrLabelA label used to reference the classifier entry
in a textual manner.
Version 1/2 attribute.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.16 |
ntnDsMultiFieldClfrSessionIdA session identifier used to reference transitory
(volatile) data.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.17 |
ntnDsMultiFieldClfrVersionVersion indicator for ntnDsMultiFieldClfrTable.rw VersionIndicator .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.18 |
ntnDsMultiFieldClfrIpFlagsRepresents the flags present in an IPv4 header.
If a bit that is associated with a specific IP flag
is set in this attribute, IPv4 packets with the
specified flag set in the header will match this
classifier.
Version 2 attribute.rw Bits .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.19 |
ntnDsMultiFieldClfrTcpCtrlFlagsRepresents the control flags (code bits) present in
an TCP header. If a bit that is associated with a
specific TCP control flag is set in this attribute,
TCP packets with the specified flag set in the header
will match this classifier.
Version 2 attribute.rw Bits .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.20 |
ntnDsMultiFieldClfrIpv4OptionsThis object indicates whether the presence,
or lack thereof, of IPv4 options in an IPv4
packet should should be considered when looking
for a match for this classifier entry.
A value of 'ipv4OptionsPresent(1)' indicates
that only IPv4 packets with options will match
this classifier element.
A value of 'ipv4OptionsNotPresent(2)' means that
only IPv4 packets without options will be
considered a match.
A value of 'ignore(3)' means that the presence,
or lack thereof, of IPv4 options in the received
packet will not be considered when determining
whether a packet matches this classifier entry.
Version 2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.2.1.21 |
ntnL2MultiFieldClfrNextFreeThis object contains an unused value for
ntnL2MultiFieldClfrId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.3 |
ntnL2MultiFieldClfrTableIEEE 802-based classifier definitions. A
class that contains attributes of IEEE 802
(e.g., 802.3) traffic that form an association
that is used to perform traffic classification. SEQUENCE OF NtnL2MultiFieldClfrEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4 |
ntnL2MultiFieldClfrEntryIEEE 802-based classifier definitions. An entry
specifies (potentially) several distinct matching
components. Each component is tested against the
data in a frame individually. An overall match
occurs when all of the individual components
match the data they are compared against in the
frame being processed. A failure of any one test
causes the overall match to fail.
Wildcards may be specified for those fields that
are not relevant. NtnL2MultiFieldClfrEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1 |
ntnL2MultiFieldClfrIdAn arbitrary integer index that uniquely
identifies this 802 classifier among all
of the 802 classifiers.
Version 1/2 attribute. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.1 |
ntnL2MultiFieldClfrDstAddrThe 802 address against which the 802 DA of
incoming traffic streams will be compared.
Frames whose 802 DA matches the physical
address specified by this object, taking
into account address wildcarding as specified
by the ntnL2MultiFieldClfrDstAddrMask object,
are potentially subject to the processing
guidelines that are associated with this
entry through the related action class.
Version 1/2 attribute.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.2 |
ntnL2MultiFieldClfrDstAddrMaskThis object specifies the bits in a 802
destination address that should be considered
when performing a 802 DA comparison against
the address specified in the
ntnL2MultiFieldClfrDstAddr object.
The value of this object represents a mask
that is logically and'ed with the 802 DA in
received frames to derive the value to be
compared against the ntnL2MultiFieldClfrDstAddr
address. A zero bit in the mask thus means that
the corresponding bit in the address always
matches. The ntnL2MultiFieldClfrDstAddr value
must also be masked using this value prior to
any comparisons.
The length of this object in octets must equal
the length in octets of the
ntnL2MultiFieldClfrDstAddr. Note that a mask
with no bits set (i.e., all zeroes) effectively
wildcards the ntnL2MultiFieldClfrDstAddr object.
Version 1/2 attribute.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.3 |
ntnL2MultiFieldClfrSrcAddrThe 802 MAC address against which the 802
MAC SA of incoming traffic streams will be
compared. Frames whose 802 MAC SA matches the
physical address specified by this object,
taking into account address wildcarding as
specified by the ntnL2MultiFieldClfrSrcAddrMask
object, are potentially subject to the
processing guidelines that are associated with
this entry through the related action class.
Version 1/2 attribute.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.4 |
ntnL2MultiFieldClfrSrcAddrMaskThis object specifies the bits in a 802 MAC
source address that should be considered when
performing a 802 MAC SA comparison against
the address specified in the
ntnL2MultiFieldClfrSrcAddr object.
The value of this object represents a mask
that is logically and'ed with the 802 MAC SA
in received frames to derive the value to be
compared against the ntnL2MultiFieldClfrSrcAddr
address. A zero bit in the mask thus means that
the corresponding bit in the address always
matches. The ntnL2MultiFieldClfrSrcAddr value
must also be masked using this value prior to
any comparisons.
The length of this object in octets must equal
the length in octets of the
ntnL2MultiFieldClfrSrcAddr. Note that a mask
with no bits set (i.e., all zeroes) effectively
wildcards the ntnL2MultiFieldClfrSrcAddr object.
Version 1/2 attribute.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.5 |
ntnL2MultiFieldClfrVlanIdMinThe minimum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnL2MultiFieldClfrVlanIdMin value must be
less than or equal to the
ntnL2MultiFieldClfrVlanIdMax value.
Setting the ntnL2MultiFieldClfrVlanIdMin object
to 1 and the ntnL2MultiFieldClfrVlanIdMax to
4094 indicates that VLAN data should not be
considered during traffic classification.
If a frame is double tagged, this value
represents the outer VLAN ID (Ovid).
Version 1/2 attribute.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.6 |
ntnL2MultiFieldClfrVlanIdMaxThe maximum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnL2MultiFieldClfrVlanIdMax value must
be greater than or equal to the
ntnL2MultiFieldClfrVlanIdMin value.
Setting the ntnL2MultiFieldClfrVlanIdMin
object to 1 and the ntnL2MultiFieldClfrVlanIdMax
to 4094 indicates that VLAN data should not
be considered during traffic classification.
If a frame is double tagged, this value
represents the outer VLAN ID (Ovid).
Version 1/2 attribute.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.7 |
ntnL2MultiFieldClfrVlanTagThis object indicates the data link layer
packet format that frames must have to match
this L2 classifier entry.
A value of 'untagged(1)' indicates that only
frames received untagged will match this
classifier component.
A value of 'tagged(2)' means that only frames
received tagged (both single tagged and double
tagged) will be considered a match.
A value of 'ignore(3)' means that the presence,
or lack thereof, of a VLAN tag in the received
packet will not be considered when determining
whether a frame matches this classifier entry.
A value of 'doubleTagged(4)' means that only
frames received with an inner and outer tag
(i.e., a double tagged frame) will be considered
a match.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.8 |
ntnL2MultiFieldClfrEtherTypeThis object specifies the value that will be
compared against the value contained in the
EtherType field of an IEEE 802 frame. Example
settings would include 'IP' (0x0800), 'ARP'
(0x0806) and 'IPX' (0x8137).
Setting the ntnL2MultiFieldClfrEtherType object
to 0xFFFF indicates that EtherType data should
not be considered during traffic classification.
Note the EtherType value of 0xFFFF is reserved
by IANA.
Version 1/2 attribute.rw Integer32 (0..'ffff'h) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.9 |
ntnL2MultiFieldClfrUserPriorityThe 802.1p user priority value against which
the value contained in the user priority
field of a tagged 802.1 frame is compared. A
test for equality is performed when
determining if a match exists between the data
in a data link layer frame and the value of
this classifier.
Setting the value of this object to
'matchAllPriorities(9)' causes all user priority
values to match this attribute. This essentially
makes any comparisons with regard to user
priority values unnecessary.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.10 |
ntnL2MultiFieldClfrStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.
Version 1/2 attribute.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.11 |
ntnL2MultiFieldClfrStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/2 attribute.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.12 |
ntnL2MultiFieldClfrLabelA label used to reference the classifier entry
in a textual manner.
Version 1/2 attribute.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.13 |
ntnL2MultiFieldClfrSessionIdA session identifier used to reference transitory
(volatile) data.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.14 |
ntnL2MultiFieldClfrVersionVersion indicator for ntnL2MultiFieldClfrTable.rw VersionIndicator .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.15 |
ntnL2MultiFieldClfrPktTypeThis object indicates the data link layer
frame format that frames must have to match
this L2 classifier entry.
A value of 'ethernetII(1)' indicates that only
Ethernet II format frames will match this
classifier component.
A value of 'snap(2)' indicates that only
IEEE 802 SNAP format frames will match this
classifier component.
A value of 'llc(3)' indicates that only
IEEE 802 LLC format frames will match this
classifier component.
A value of 'ignore(4)' means that the frame,
format will not be considered when determining
whether a frame matches this classifier entry.
Version 2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.16 |
ntnL2MultiFieldClfrIvidMinThe minimum value that the Inner VLAN ID (Ivid)
in a double tagged packet must have in order to
match this classifier entry.
The ntnL2MultiFieldClfrIvidMin value must be
less than or equal to the
ntnL2MultiFieldClfrIvidMax value.
Setting the ntnL2MultiFieldClfrIvidMin object
to 1 and the ntnL2MultiFieldClfrIvidMax to
4094 indicates that inner VLAN tag data should
not be considered during traffic classification.
A non-default value for this attribute may only
be specified if the ntnL2MultiFieldClfrVlanTag
attribute has a value of 'doubleTagged(4)'.
Version 2 attribute.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.17 |
ntnL2MultiFieldClfrIvidMaxThe maximum value that the Inner VLAN ID (Ivid)
in a double tagged packet must have in order to
match this classifier entry.
The ntnL2MultiFieldClfrIvidMax value must
be greater than or equal to the
ntnL2MultiFieldClfrIvidMin value.
Setting the ntnL2MultiFieldClfrIvidMin
object to 1 and the ntnL2MultiFieldClfrIvidMax
to 4094 indicates that VLAN data should not
be considered during traffic classification.
A non-default value for this attribute may only
be specified if the ntnL2MultiFieldClfrVlanTag
attribute has a value of 'doubleTagged(4)'.
Version 2 attribute.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.18 |
ntnL2MultiFieldClfrTPIDThis object specifies the value that will be
compared against the value contained in the
Ethertype field of the outer tag of a
single or a double tagged (802.1ad QinQ) packet.
Setting the ntnL2MultiFieldClfrTPID object
to 0xFFFF indicates that EtherType data should
not be considered during traffic classification.
Note the EtherType value of 0xFFFF is reserved
by IANA.
The default value is 0x8100, considering the
standard 0x8100 value as the tag protocol
identifier for the vlan tag.
Version 1/2 attribute.rw Integer32 (0..'ffff'h) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.19 |
ntnL2MultiFieldClfrCFIThis object indicates the data link layer
frame format that frames must have to match
this L2 classifier entry.
A value of 'cfiZero(1)' indicates that only
tagged frames with the CFI bit set to zero
will match this classifier component.
A value of 'cfiOne(2)' indicates that only
tagged frames with the CFI bit is set to one
will match this classifier component.
A value of 'ignore(3)' means that the frame,
format will not be considered when determining
whether a frame matches this classifier entry.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.20 |
ntnL2MultiFieldClfrITPIDThis object specifies the value that will be
compared against the value contained in the
Ethertype field of the inner tag of a
double tagged (802.1ad QinQ) packet.
Setting the ntnL2MultiFieldClfrITPID object
to 0xFFFF indicates that EtherType data should
not be considered during traffic classification.
Note the EtherType value of 0xFFFF is reserved
by IANA.
The default value is 0x8100, considering the
standard 0x8100 value as the tag protocol
identifier for the vlan tag.
Version 1/2 attribute.rw Integer32 (0..'ffff'h) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.21 |
ntnL2MultiFieldClfrICFIThis object indicates the data link layer
frame format that frames must have to match
this L2 classifier entry.
A value of 'cfiZero(1)' indicates that only
double tagged frames with the CFI bit set
to zero in the inner tag will match this
classifier component.
A value of 'cfiOne(1)' indicates that only
double tagged frames with the CFI bit set
to one in the inner tag will match this
classifier component.
A value of 'ignore(3)' means that the frame,
format will not be considered when determining
whether a frame matches this classifier entry.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.22 |
ntnL2MultiFieldClfrIUserPriorityThe 802.1p user priority value against which
the value contained in the user priority
field of the inner tag of a double tagged
802.1 frame is compared. A test for equality
is performed when determining if a match exists
between the data in a data link layer frame and
the value of this classifier.
Setting the value of this object to
'matchAllPriorities(9)' causes all user priority
values to match this attribute. This essentially
makes any comparisons with regard to user
priority values unnecessary.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.4.1.23 |
ntnSystemClfrNextFreeThis object contains an unused value for
ntnSystemClfrId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.5 |
ntnSystemClfrTableThe System Classifier Table defines
classification data that is platform or
hardware specific. SEQUENCE OF NtnSystemClfrEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6 |
ntnSystemClfrEntryAn entry in the System Classifier Table
describes classification data that is
specifically related to system or hardware
capabilities. As such, support for this
table or for individual attributes
contained in the table will vary from
system to system. Entries within this
table are referenced through the Classifier
Component Table (ntnClfrComponentTable) to
provide system-specific classification data. NtnSystemClfrEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1 |
ntnSystemClfrIdAn index that enumerates the system
classifier entries. Managers can obtain
new index values for row creation in this
table by reading ntnSystemClfrNextFree.
Version 1/2 attribute. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.1 |
ntnSystemClfrUnknownUcastFramesIf 'true(1)', frames containing an unknown
unicast destination address will match this
classification entry. A value of 'false(2)'
indicates that no classification is requested
based on this address type.
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.2 |
ntnSystemClfrUnknownMcastFramesIf 'true(1)', frames containing an unknown
multicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested based on this address type.
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.3 |
ntnSystemClfrKnownUcastFramesIf 'true(1)', frames containing a known
unicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested based on this address type.
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.4 |
ntnSystemClfrKnownMcastFramesIf 'true(1)', frames containing a known
multicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested based on this address type.
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.5 |
ntnSystemClfrBcastFramesIf 'true(1)', frames containing a broadcast
destination address will match this
classification entry. A value of 'false(2)'
indicates that no classification is
requested based on this address type.
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.6 |
ntnSystemClfrPatternPositionSupports arbitrary pattern match classification.
Up to 128 bytes of data within the first 128 bytes
of a packet can be identified for pattern matching
purposes. This object and the ntnSystemClfrPatternData
object specify byte patterns and their position in
a packet. When a packet is classified using this data,
the appropriate bytes, or portions thereof, in the
packet are compared against the byte patterns defined
by the ntnSystemClfrPatternData attribute. If the
data at the specified packet offset is the same,
the packet is considered a match.
The byte positions, and the pertinent bits within
each identified byte, used for comparison purposes
are specified using this attribute. The positions
to be matched are identified by setting the appropriate
bits to one. All other bits must be set to zero.
For example, to specify that byte positions 5-8
and the high-order nibble (4 bits) of bytes 13-16
should be examined, this attribute would be set
as follows:
ntnSystemClfrPatternPosition (size 16):
00:00:00:00:FF:FF:FF:FF:00:00:00:00:0F:0F:0F:0F
The target byte patterns would then be placed
in bytes 5-8 and in portions of bytes 13-16 of the
ntnSystemClfrPatternData attribute:
ntnSystemClfrPatternData (size 16):
00:00:00:00:XX:XX:XX:XX:00:00:00:00:0Y:0Y:0Y:0Y
Note that an implementation may not support pattern
matching, also know as offset filtering, for the
maximum number of bytes supported by the pattern
match attributes. The number of bytes that can
contain data for comparison purposes and the position
of those bytes in relation to the start of a packet
are thus implementation dependent.
Use of this object and the associated
ntnSystemClfrPatternData object invalidates the
use of any other classification data in this and
related (through the ntnClfrComponentTable)
classifier entries. In other words, providing an
explicit pattern overrides the implicit patterns
defined when classification data is specified
for other fields, such as the IP source address
or EtherType classification attributes.
A zero length string is used to indicate that
explicit pattern matching is not requested.
Version 1/2 attribute.rw OCTET STRING .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.7 |
ntnSystemClfrPatternDataSupports arbitrary pattern match classification.
Up to 128 bytes of data within the first 128 bytes
of a packet can be identified for pattern matching
purposes. This object and the
ntnSystemClfrPatternPosition object specify byte
patterns and their position in a packet. When a
packet is classified using this data, the appropriate
bytes, or portions thereof, in the packet are compared
against the byte patterns defined by the this
attribute. If the data at the specified packet offset
is the same, the packet is considered a match.
The byte patterns used for comparison purposes
are specified using this attribute. The target
data is placed in the octet string at the
positions specified through the
ntnSystemClfrPatternPosition attribute. All
other bytes should be set to zero
For example, to specify that byte positions 5-8
and the high-order nibble (4 bits) of bytes 13-16
should be examined, the associated
ntnSystemClfrPatternPosition value would be set
as follows:
ntnSystemClfrPatternPosition (size 16):
00:00:00:00:FF:FF:FF:FF:00:00:00:00:0F:0F:0F:0F
The target byte patterns would then be placed
in bytes 5-8 and in portions of bytes 13-16 of
this attribute:
ntnSystemClfrPatternData (size 16):
00:00:00:00:XX:XX:XX:XX:00:00:00:00:0Y:0Y:0Y:0Y
Note that an implementation may not support pattern
matching, also know as offset filtering, for the
maximum number of bytes supported by the pattern
match attributes. The number of bytes that can
contain data for comparison purposes and the position
of those bytes in relation to the start of a packet
are thus implementation dependent.
Use of this object and the associated
ntnSystemClfrPatternPosition object invalidates
the use of any other classification data in
this and related (through the ntnClfrComponentTable)
classifier entries. In other words, providing
an explicit pattern overrides the implicit
patterns defined when classification data is
specified for other fields, such as the IP source
address or EtherType classification attributes.
A zero length string is used to indicate that
explicit pattern matching is not requested.
Version 1/2 attribute.rw OCTET STRING .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.8 |
ntnSystemClfrStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the associated
status object is equal to 'active'.
Version 1/2 attribute.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.9 |
ntnSystemClfrStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/2 attribute.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.10 |
ntnSystemClfrPatternFormatThis object indicates the data link layer
packet format that is used when specifying
pattern match data.
A value of 'untagged(1)' indicates that the
specified pattern match data does not include
an 802.1Q tag.
A value of 'tagged(2)' indicates that the
specified pattern match data does include
an 802.1Q (single) tag.
A value of 'doubleTagged(3)' indicates that
the specified pattern match data does include
an 802.1Q double tag.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.11 |
ntnSystemClfrLabelA label used to reference the classifier entry
in a textual manner.
Version 1/2 attribute.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.12 |
ntnSystemClfrSessionIdA session identifier used to reference transitory
(volatile) data.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.13 |
ntnSystemClfrVersionVersion indicator for ntnSystemClfrTable.rw VersionIndicator .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.14 |
ntnSystemClfrUnknownIpMcastIf 'true(1)', IP packets containing an unknown
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
address type.
Version 2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.15 |
ntnSystemClfrKnownIpMcastIf 'true(1)', IP packets containing a known
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
address type.
Version 2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.16 |
ntnSystemClfrNonIpPktIf 'true(1)', non IP packets will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
packet type.
Version 2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.17 |
ntnSystemClfrPatternIpVersionThis object indicates the IP packet format
that is used when specifying pattern match
data.
A value of 'notApplicable(1)' is used when
the pattern match data can be specified without
indicating the target packet type.
A value of 'nonIp(2)' indicates that the
specified pattern match data should be applied
to non-IP packets.
A value of 'ipv4(3)' indicates that the
specified pattern match data should be applied
to IPv4 packets.
A value of 'ipv6(4)' indicates that the
specified pattern match data should be applied
to IPv6 packets.
Version 2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.18 |
ntnSystemClfrUnknownNonIpMcastIf 'true(1)', non-IP packets containing an unknown
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
address type.
Version 2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.19 |
ntnSystemClfrKnownNonIpMcastIf 'true(1)', non-IP packets containing a known
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
address type.
Version 2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.20 |
ntnSystemClfrPatternL2FormatThis object indicates the L2 packet format
that is used when specifying pattern match
data.
A value of 'notApplicable(1)' is used when
the pattern match data can be specified without
indicating the target L2 packet format.
A value of 'ethernetII(2)' indicates that the
specified pattern match data should be applied
to Ethernet II format frames.
A value of 'snap(3)' indicates that the
specified pattern match data should be applied
to IEEE 802 SNAP format frames.
A value of 'llc(4)' indicates that the
specified pattern match data should be applied
to IEEE 802 LLC format frames.
Version 2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.6.1.21 |
ntnClfrComponentNextFreeThis object contains an unused value for
ntnClfrComponentId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.7 |
ntnClfrComponentTableThe Classifier Component Table identifies
classification data from protocol, media and
hardware specific tables and links the data
to form a single classifier. SEQUENCE OF NtnClfrComponentEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.8 |
ntnClfrComponentEntryAn entry in the Classifier Component Table
describes a collection of classification data
from a single protocol, media or hardware
specific classifier table. Entries within
this table are linked through a common set
identifier. This identifier is used to
reference the constructed set of classification
data for a policy, through the ntnQosPolicyTable,
or for classifier block creation, through the
ntnClfrBlockTable. NtnClfrComponentEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.8.1 |
ntnClfrComponentIdAn index that enumerates the classifier
component entries. Managers can obtain new
index values for row creation in this table
by reading ntnClfrComponentNextFree.
Version 1/2 attribute. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.8.1.1 |
ntnClfrComponentSpecificIdentifies an entry containing classification
data in a protocol, media or hardware specific
classifier table. Entries are referenced using
a RowPointer value specifying the RowStatus
attribute of the entry being identified.
Entries in other tables must exist prior to
being referenced. It may be permissible to
create component table entries and the entries
being referenced in the same request.
Entries may not be deleted while still
referenced by an active entry in this table.
Version 1/2 attribute.rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.8.1.2 |
ntnClfrComponentSetIdIdentifies a set of classifier data. Entries
in this table with the same value for this
attribute are considered components of the
same classifier. This set identifier is used
to reference this classification data from
other QoS tables, including the QoS Policy
Table (ntnQosPolicyTable) and the Classifier
Block Table (ntnClfrBlockTable). Members of
a given classifier component set may be
prohibited from being deleted if the set is
referenced by an active entry in another table.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.8.1.3 |
ntnClfrComponentLabelA label used to reference the classifier
component set in a textual manner. All
members of the same component set, as
determined by the value of the
ntnClfrComponentSetId attribute, must have
the same label.
Version 1/2 attribute.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.8.1.4 |
ntnClfrComponentStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.
Version 1/2 attribute.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.8.1.5 |
ntnClfrComponentStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/2 attribute.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.8.1.6 |
ntnClfrComponentSessionIdA session identifier used to reference transitory
(volatile) data.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.8.1.7 |
ntnClfrComponentVersionVersion indicator for ntnClfrComponentTable.
Members of the same classifier component set
must all have the same version information.rw VersionIndicator .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.8.1.8 |
ntnClfrBlockNextFreeThis object contains an unused value for
ntnClfrBlockId ,or a zero to indicate that
none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.9 |
ntnClfrBlockTableThe Classifier Block Table supports the
ability to group individual classifiers
into an unordered list, or block, of
classifiers. SEQUENCE OF NtnClfrBlockEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10 |
ntnClfrBlockEntryAn entry in the Classifier Block Table
describes a single member of a group of
the classifiers. Each entry identifies
classification data, defined through the
Classifier Component Table (ntnClfrComponentTable).
Block members are considered unordered for
evaluation purposes and can be thought of
as being applied 'simultaneously'. All
block members must perform classification
based on the same set of data. Related
entries within this table are linked
through a common group identifier. This
identifier is used to reference the
classification block for a policy through
the QoS Policy Table (ntnQosPolicyTable). NtnClfrBlockEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1 |
ntnClfrBlockIdAn index that enumerates the classifier
block entries. Managers can obtain new
index values for row creation in this
table by reading ntnClfrBlockNextFree.
Version 1/2 attribute. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.1 |
ntnClfrBlockNumberIdentifies a group of classification
entries. Entries in this table with the
same value for this attribute are considered
members of the same group (i.e., classifier
block). This block identifier is used to
reference this unordered collection of
classification data from other QoS tables,
including the QoS Policy Table
(ntnQosPolicyTable). Members of a specific
classification group may be deleted, even
if the group is referenced by an active
entry in another table, as long as at least
one member of the group is not deleted.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.2 |
ntnClfrBlockClfrCompSetIdIdentifies a classifier component set in
the Classifier Component Table
(ntnClfrComponentTable) containing
classification data. Component entries must
exist prior to being referenced. It may be
permissible to create component table
entries and classifier block entries in
the same request. Referenced entries may
not be deleted while still referenced by
an active entry in this table.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.3 |
ntnClfrBlockMeterThis attribute identifies the meter that is
associated with this classifier block. Meters
are specified in the ntnQosMeterTable and
associated tables. The corresponding instance in
the ntnQosMeter class (i.e., the class instance
where the ntnQosMeterId is equal to the value of
this object) must exist prior to being associated
with a block entry.
A value of 0 indicates that no individual classifier
metering is requested.
Version 1/2 attribute.rw IndexIntegerOrZero .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.4 |
ntnClfrBlockActionThis attribute identifies the action that is to
be initiated for flows that are not being metered
and that match the classification criteria specified
through this classifier block. The value of this
attribute will not be used (and should be set to
0) when metering is requested. Under this scenario,
the in-profile and out-of-profile actions are
specified through the appropriate ntnQosMeterEntry.
Actions must be defined in the ntnQosBaseActionTable
prior to being referenced by this attribute. A
non-zero value for this attribute must be provided
unless metering is requested (if action data is
being specified per classifier).
Version 1/2 attribute.rw IndexIntegerOrZero .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.5 |
ntnClfrBlockLabelA label used to reference the classifier
group in a textual manner. All members of
the same group, as determined by the value
of the ntnClfrBlockNumber attribute, must
have the same label.
Version 1/2 attribute.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.6 |
ntnClfrBlockStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.
Version 1/2 attribute.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.7 |
ntnClfrBlockStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/2 attribute.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.8 |
ntnClfrBlockSessionIdA session identifier used to reference transitory
(volatile) data.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.9 |
ntnClfrBlockVersionVersion indicator for ntnClfrBlockTable.
Members of the same classifier block must
all have the same version information.rw VersionIndicator .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.10 |
ntnClfrBlockPrecedenceThe relative order in which the classifier
sets associated with this block are applied,
with regard to other classifiers sets within
the block. Higher numbers represent block
members with higher precedence. Block members
with higher precedence are applied before
members with lower precedence.
Precedence values must be unique across members
of the same classifier block when block members
are evaluated in a specific order. Precedence
values must be the same across block members
when they are evaluated simultaneously.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.10.1.11 |
ntnClfrComponentSetNextFreeThis object contains an unused value for
ntnClfrComponentSetId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.11 |
ntnClfrBlockNumberNextFreeThis object contains an unused value for
ntnClfrBlockNumber ,or a zero to indicate that
none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.5.12 |
ntnQosMeterClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.6 |
ntnQosMeterNextFreeThis object contains an unused value for
ntnQosMeterId, or a zero to indicate that
none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.1 |
ntnQosMeterTableThis table enumerates specific meters that
a system may use to police a stream of traffic.
Specific meter details are to be found in
table entry referenced by ntnQosMeterSpecific. SEQUENCE OF NtnQosMeterEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2 |
ntnQosMeterEntryAn entry in the meter table describes a
single conformance level of a meter. NtnQosMeterEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1 |
ntnQosMeterIdAn index that enumerates the Meter entries.
Managers can obtain new index values for row
creation in this table by reading
ntnQosMeterNextFree.
Version 1/2 attribute. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1.1 |
ntnQosMeterSucceedNextIf the traffic being processed does conform,
based on the traffic profile associated with
this entry, this selects the next element to
handle traffic for this data path. This
RowPointer should point to an instance of
one of:
ntnQosMeterEntry
ntnQosBaseActionEntry
Entries in other tables must exist prior to
being referenced. It may be permissible to
create component table entries and the entries
being referenced in the same request.
Referenced entries may not be deleted while
still referenced by an active entry in this
table.
Version 1/2 attribute.rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1.2 |
ntnQosMeterFailNextIf the traffic being processed does not
conform, based on the traffic profile
associated with this entry, this selects
the next element to handle traffic for
this data path. This RowPointer should
point to an instance of one of:
ntnQosMeterEntry
ntnQosBaseActionEntry
Entries in other tables must exist prior
to being referenced. It may be permissible
to create component table entries and the
entries being referenced in the same request.
Referenced entries may not be deleted while
still referenced by an active entry in this
table.
Version 1/2 attribute.rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1.3 |
ntnQosMeterSpecificThis indicates the behavior of the meter
by pointing to an entry containing detailed
parameters. Note that entries in that specific
table must be managed explicitly.
For example, ntnQosMeterSpecific may point to
an entry in ntnQosTBParamTable, which contains
an instance of a single set of Token Bucket
parameters.
Entries in other tables must exist prior to
being referenced. It may be permissible to
create component table entries and the entries
being referenced in the same request. Referenced
entries may not be deleted while still
referenced by an active entry in this table.
Version 1/2 attribute.rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1.4 |
ntnQosMeterOutOfProfileStatsIdentifies an entry in the Count Action Table
(ntnQosCountActTable) that is used to accumulate
statistics related to traffic processed based
on this meter data that was deemed to be
non-conformant (i.e., out-of-profile).
If out-of-profile statistics are not wanted or
are not available, this attribute will be set
to 0.
Version 1/2 attribute.rw IndexIntegerOrZero .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1.5 |
ntnQosMeterLabelA label used to reference the meter
data in a textual manner.
Version 1/2 attribute.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1.6 |
ntnQosMeterStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.
Version 1/2 attribute.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1.7 |
ntnQosMeterStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/2 attribute.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1.8 |
ntnQosMeterSessionIdA session identifier used to reference transitory
(volatile) data.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1.9 |
ntnQosMeterVersionVersion indicator for ntnQosMeterTable.rw VersionIndicator .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.2.1.10 |
ntnQosTBParamNextFreeThis object contains an unused value for
ntnQosTBParamId, or a zero to indicate that
none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.3 |
ntnQosTBParamTableEntries in this table enumerate a set of
token bucket meter parameters that a system
may use to police a stream of traffic. Such
meters are modeled here as having a single
rate and a single burst size. Multiple
entries are used when multiple rates/burst
sizes are needed. SEQUENCE OF NtnQosTBParamEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4 |
ntnQosTBParamEntryAn entry that describes a single set of
token bucket parameters. NtnQosTBParamEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1 |
ntnQosTBParamIdAn index that enumerates the Token Bucket
Parameter entries. Managers can obtain new
index values for row creation in this table
by reading ntnQosTBParamNextFree.
Version 1/2 attribute. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.1 |
ntnQosTBParamTypeThe Metering algorithm associated with
the Token Bucket parameters. The number
and type of algorithms supported is
implementation dependent. Potential
algorithms include:
ntnQosTBParamSimpleTokenBucket
ntnQosTBParamAvgRate
ntnQosTBParamSrTCMBlind
ntnQosTBParamSrTCMAware
ntnQosTBParamTrTCMBlind
ntnQosTBParamTrTCMAware
ntnQosTBParamTswTCM
An OBJECT-IDENTITY for each of these
algorithms is defined in this module.
Additional values may be specified as
needed.
Version 1/2 attribute.rw AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.2 |
ntnQosTBParamRateThe token-bucket rate, in kilobits per
second (kbps). This attribute is used for:
CIR for Simple Token Bucket
CIR in RFC 2697 for srTCM
CIR and PIR in RFC 2698 for trTCM
CTR and PTR in RFC 2859 for TSWTCM
AverageRate in RFC 3290.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.3 |
ntnQosTBParamBurstSizeThe maximum number of bytes in a single
transmission burst. This attribute is
used for:
Token bucket size for Simple Token Bucket
CBS and EBS in RFC 2697 for srTCM
CBS and PBS in RFC 2698 for trTCM
Burst Size in RFC 3290.
Version 1/2 attribute.rw BurstSize UNITS "Bytes" .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.4 |
ntnQosTBParamIntervalThe time interval used with the token
bucket. This attribute is used for:
Average Rate Meter (Informal DS Model section 5.2.1) - Delta
Simple Token Bucket Meter (Informal DS Model 5.1) - time interval t
RFC 2859 TSWTCM - AVG_INTERVAL
RFC 2697 srTCM - token bucket update time interval
RFC 2698 trTCM - token bucket update time interval.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.5 |
ntnQosTBParamLabelA label used to reference the token bucket
data in a textual manner.
Version 1/2 attribute.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.6 |
ntnQosTBParamStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.
Version 1/2 attribute.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.7 |
ntnQosTBParamStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/2 attribute.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.8 |
ntnQosTBParamSessionIdA session identifier used to reference transitory
(volatile) data.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.9 |
ntnQosTBParamVersionVersion indicator for ntnQosTBParamTable.rw VersionIndicator .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.10 |
ntnQosTBParamMinRateThe minimum token-bucket rate, in kilobits
per second (kbps).
Version 2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.4.1.11 |
ntnQosTBMeters OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.5 |
ntnQosTBParamSimpleTokenBucketTwo Parameter Token Bucket Meter as
described in the Informal Differentiated
Services Model section 5.2.3. OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.5.1 |
ntnQosTBParamAvgRateAverage Rate Meter as described in the
Informal Differentiated Services Model
section 5.2.1. OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.5.2 |
ntnQosTBParamSrTCMBlindSingle Rate Three Color Marker Metering
as defined by RFC 2697,in the `Color Blind'
mode as described by the RFC. OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.5.3 |
ntnQosTBParamSrTCMAwareSingle Rate Three Color Marker Metering as
defined by RFC 2697,in the `Color Aware'
mode as described by the RFC. OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.5.4 |
ntnQosTBParamTrTCMBlindTwo Rate Three Color Marker Metering as
defined by RFC 2698, in the `Color Blind'
mode as described by the RFC. OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.5.5 |
ntnQosTBParamTrTCMAwareTwo Rate Three Color Marker Metering as
defined by RFC 2698, in the `Color Aware'
mode as described by the RFC. OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.5.6 |
ntnQosTBParamTswTCMTime Sliding Window Three Color Marker
Metering as defined by RFC 2859. OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.6.5.7 |
ntnQosActionClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.7 |
ntnQosBaseActionNextFreeThis object contains an unused value for
ntnQosBaseActionId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.1 |
ntnQosBaseActionTableContains the current set of configured
base actions. The actions are associated
with classifiers, meters and interfaces
through policies during operation. SEQUENCE OF NtnQosBaseActionEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2 |
ntnQosBaseActionEntryGeneral action definitions. Each entry
specifies an instance of the ntnQosBaseAction
class which describes (potentially) several
distinct action attributes. Each action is
taken individually regarding the data in
question. Several actions can be taken for
a single frame.
An instance of this class cannot be deleted
while it is being referenced by an entry in
another class. NtnQosBaseActionEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1 |
ntnQosBaseActionIdAn index that enumerates the QoS Base
Action entries. Managers can obtain new
index values for row creation in this
table by reading ntnQosBaseActionNextFree.
Actions are associated with instances in
other classes (e.g., the QoS Policy class)
using this attribute. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.1 |
ntnQosBaseActionDropThis action attribute is used to specify
whether a packet should dropped, switched
(i.e., not dropped) or whether the decision
to drop the packet should be deferred.
The value 'drop(1)', when specified, will
cause the packet being evaluated to be
dropped. A value of 'dontDrop(2)' indicates
that this packet should not be dropped.
A value of 'deferredPass(3)' indicates that
no explicit assertion, related to whether or
not the packet should be discarded, is being
made. This option, when available, can be
used to allow actions associated with lower
precedence policies to determine whether a
packet should be dropped or not. A 'drop(1)'
or 'dontDrop(2)' in a lower precedence action
is given precedence over a higher precedence
'deferredPass(3)'. Support for this
enumeration is implementation dependent.
Prior to discarding a packet, other actions
that have been specified should be performed
if they make protocol sense. For example,
requests for traffic mirroring (if such an
action is supported by a device) should be
honored. However, updating protocol header
values will typically not be necessary.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.2 |
ntnQosBaseActionUpdateDscpThis action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram to be updated
with the value of this object.rw DscpUpdate .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.3 |
ntnQosBaseActionUpdateUserPriorityThis action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame to be
updated based on the value of this object.
Specifying a value equal to 'deriveFromIngressTosPrec(9)'
means that the value for this attribute will be
assigned based on the value of the precedence bits
in the IP Type-Of-Service (TOS) field, as defined
in RFC 791. The eight precedence values, also
referred to as Class Selector (CS) values, have a
one-to-one correspondence with the eight 802.1p user
priority values.
Specifying a value equal to 'deriveFromIngressDscp(10)'
means that the value for this attribute will be
assigned based on DSCP-to-user priority map
information maintained in the system. The DSCP
value in received traffic will be used to determine
the user priority.
Specifying a value equal to 'deriveFromEgressDscp(11)'
means that the value for this attribute will be
assigned based on DSCP-to-user priority map
information maintained in the system. The DSCP
value specified for remarking in the
ntnQosBaseActionUpdateDscp attribute will be used
to determine the user priority.
Specifying a value equal to 'ignore(12)' means
that no action will be taken related to this
attribute.
Specifying a value equal to 'markAsPriorityCopy(13)'
means that the priority is updated based on the
user priority field in the outer vlan tag. The priority
copy functionality can be used for 802.1ad double tagged
traffic where the priority field in the service provider
vlan tag can be copied from the user priority in the
customer vlan tag.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.4 |
ntnQosBaseActionSetDropPrecedenceThis action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used to determine
traffic precedence relative to other
traffic being processed by the device
and other implementation specific
operations at the egress interface.
A low value for the drop precedence equates
to the traffic receiving a higher priority
in terms of processing. In other words,
when congestion is encountered, packets
with a 'highDropPrec(2)' will be dropped
before packets with a 'lowDropPrec(1)'.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.5 |
ntnQosBaseActionCopyToCpuThis action attribute, when specified, has
the ability to cause the packet being
evaluated to be sent to the CPU for further
processing. Extreme care should be taken
when setting this object to 'true(1)' since
this action may adversely affect resource
availability in the system impacting overall
system operation.
A value of 'false(2)' indicates that this
action will not be initiated.
If this operation is requested and 'drop'
has been specified, the packet will be
sent to the CPU and not forwarded by the
system. Specifying 'true(1)' when 'drop'
has not been specified will cause a copy
of the packet to be sent to the CPU and
the packet itself will receive normal
forwarding treatment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.6 |
ntnQosBaseActionMirrorFrameThis action attribute, when specified, will
cause the packet being evaluated to be sent
to a predefined egress port for transmission
in addition to the normal processing
associated with the packet.
Specification of the egress port or ports
that will serve as the destination for
mirrored data is beyond the scope of this
document. Furthermore, note that data
mirroring can potentially consume substantial
resources at the egress. Over-subscription
issues should be considered prior to
specifying this action.
A value of 'false(2)' indicates that this
action will not be initiated.
If this operation is requested and 'drop'
has been specified, the packet will be
mirrored to the specified port and not
forwarded by the system. Specifying 'true(1)'
when 'drop' has not been specified will
cause a copy of the packet to be mirrored
and the packet itself will receive normal
forwarding treatment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.7 |
ntnQosBaseActionExtensionIdentifies an entry in an auxiliary action
table containing additional actions to be
performed on/applied to identified traffic.
Entries are referenced using a RowPointer
value specifying the RowStatus attribute
of the entry being identified. Entries in
other tables must exist prior to being
referenced. It may be permissible to create
base table entries and the entries being
referenced in the same request. Referenced
entries may not be deleted while still
referenced by an active entry in this table.
A null value for this attribute (0.0)
indicates that no action extensions have
been specified.rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.8 |
ntnQosBaseActionLabelA label used to reference the action entry
in a textual manner.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.9 |
ntnQosBaseActionStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.10 |
ntnQosBaseActionStatusThe status of this row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.11 |
ntnQosBaseActionSessionIdA session identifier used to reference transitory
(volatile) data.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.2.1.12 |
ntnQosIfcActionNextFreeThis object contains an unused value for
ntnQosIfcActionId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.3 |
ntnQosIfcActionTableContains the current set of configured
interface actions. The actions are associated
with classifiers, meters and interfaces
through policies during operation indirectly
through extensions of other action entries. SEQUENCE OF NtnQosIfcActionEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4 |
ntnQosIfcActionEntryInterface action definitions. Each entry
specifies an instance of the ntnQosIfcAction
class which describes (potentially) several
distinct action attributes. Each action is
taken individually regarding the data in
question. Several actions can be taken for
a single frame.
An instance of this class cannot be deleted
while it is being referenced by an entry in
another class. NtnQosIfcActionEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1 |
ntnQosIfcActionIdAn index that enumerates the QoS Interface
Action entries. Managers can obtain new index
values for row creation in this table by
reading ntnQosIfcActionNextFree. Actions are
associated with instances in other classes
(e.g., the QoS Base Action class) using this
attribute as a component in the identifying
RowPointer. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1.1 |
ntnQosIfcActionUpdateVlanIdThis action attribute, when specified, will
cause the Vlan Id in the frame being processed
to be updated using the specified value. The
Vlan Id value will not be updated based on QoS
classification if the value of this attribute
equals -1.rw Integer32 (-1 | 1..4094) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1.2 |
ntnQosIfcActionSetEgressMaskThis action component, when specified, will
cause the potential list of egress interfaces
for a given packet to be limited to those
interfaces that are included in the egress
interface mask specified by this attribute.
A packet will only be transmitted out
interfaces that are both identified through
this attribute AND through the normal
forwarding logic. Potential egress interfaces
are identified by setting the bit in the
egress mask that corresponds to the ifIndex
value associated with the interface.
Each bit of this bit mask corresponds to an
ifIndex value, with the most significant bit
of the i-th octet of this octet string
corresponding to the ((8*i) - 7)-th ifIndex,
and the least significant bit of the i-th
octet corresponding to the (8*i)-th ifIndex.
A zero length octet string indicates that
this action component has not been set to an
appropriate value and should not be used for
action initiation. Egress interface restrictions
will not be updated based on QoS classification
in this case.rw OCTET STRING .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1.3 |
ntnQosIfcActionSetEgressUcastIfcThis action attribute supports redirection
of normally-switched, known unicast packets to
a specific interface. An egress interface is
identified for redirection by setting this
attribute to the logical ifIndex value
associated with the interface. Setting this
attribute to 0 indicates that redirection of
unicast traffic based on QoS classification
is not requested.
Specifying the same ifIndex value for this
object and the ntnQosIfcActionSetEgressNUcastIfc
attribute causes all traffic to be redirected
if it matches specified QoS classification
criteria.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1.4 |
ntnQosIfcActionSetEgressNUcastIfcThis action attribute supports redirection
of normally-switched non-unicast (includes
broadcast, multicast and flooded/unknown
unicast) packets to a specific interface. An
egress interface is identified for redirection
by setting this attribute to the logical
ifIndex value associated with the interface.
Setting this attribute to 0 indicates that
redirection of non-unicast traffic based on
QoS classification is not requested.
Specifying the same ifIndex value for this
object and the ntnQosIfcActionSetEgressUcastIfc
attribute causes all traffic to be redirected
if it matches specified QoS classification
criteria.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1.5 |
ntnQosIfcActionExtensionIdentifies an entry in an auxiliary action
table containing additional actions to be
performed on/applied to identified traffic.
Entries are referenced using a RowPointer
value specifying the RowStatus attribute
of the entry being identified. Entries in
other tables must exist prior to being
referenced. It may be permissible to create
referencing table entries and the entries
being referenced in the same request.
Referenced entries may not be deleted while
still referenced by an active entry in this
table.
A null value for this attribute (0.0) indicates
that no action extensions have been specified.rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1.6 |
ntnQosIfcActionLabelA label used to reference the action entry
in a textual manner.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1.7 |
ntnQosIfcActionStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1.8 |
ntnQosIfcActionStatusThe status of this row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1.9 |
ntnQosIfcActionSessionIdA session identifier used to reference transitory
(volatile) data.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.7.4.1.10 |
ntnQosPolicyClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.8 |
ntnQosPolicyNextFreeThis object contains an unused value for
ntnQosPolicyId, or a zero to indicate that
none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.1 |
ntnQosPolicyTableA policy class that applies a set of
classifiers to interfaces specifying, for
each association, the precedence order of
the classifier with respect to other
classifiers applied to the same interface
and, for each policy, the action to take
for a packet that matches the classifiers
referenced by the policy. Interfaces are
specified abstractly in terms of interface
groups or roles.
This class may reference individual classifiers
or blocks of classifiers. Classification data
is identified by its type (i.e., single
classifier or group of classifiers) and an
identifier based on the type. A policy is
formed by associating the classification data
with an interface group, actions to be carried
out based on classification and metering
criteria, if applicable. SEQUENCE OF NtnQosPolicyEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2 |
ntnQosPolicyEntryAn instance of the ntnQosPolicy class. Instance
creation may be prohibited based on the status
of certain class attributes which must exist
prior to class instantiation. NtnQosPolicyEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1 |
ntnQosPolicyIdAn index that enumerates the QoS Policy entries.
Managers can obtain new index values for row
creation in this table by reading ntnQosPolicyNextFree.
Version 1/2 attribute. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.1 |
ntnQosPolicyClassifierTypeThe type of classification resources that are
being referenced by this QoS policy. This
classifier type indication, together with the
corresponding ntnQosPolicyClassifierId attribute,
uniquely identifies the classification data
associated with this entry.
The value of this attribute dictates the
interpretation of the classifier Id in the
ntnQosPolicyClassifierId attribute. A value of
'individualClfr(1)' means the value references
entries in the Classifier Component Table
(ntnClfrComponentTable) using the component set
identifier. A value of 'blockOfClfrs(2)' means
the value reference entries in the Classifier
Block Table (ntnClfrBlockTable) using the
classification block number.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.2 |
ntnQosPolicyClassifierIdThis attribute identifies the classification
data that is associated with this policy. It
identifies either an individual classifier or
a block of classifiers, based on the value of
the ntnQosPolicyClassifierType attribute. A
value of 'individualClfr(1)' means this value
references entries in the Classifier Component
Table (ntnClfrComponentTable) using the component
set identifier. A value of 'blockOfClfrs(2)'
means this value reference entries in the
Classifier Block Table (ntnClfrBlockTable) using
the classification block number
Referenced classification data must be defined
prior to being referenced.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.3 |
ntnQosPolicyInterfaceRolesThe interfaces to which this policy applies,
specified in terms of a set of roles. The role
combination specified by this attribute must
exist in the ntnQosInterfaceTypeTable or the
individual roles must exist in the
ntnQosInterfaceRoleTable prior to being associated
with an instance of this class.
Version 1/2 attribute.rw RoleCombination (POLICY-FRAMEWORK-PIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.4 |
ntnQosPolicyPrecedenceThe relative order in which the classifier
elements associated with this policy are applied,
with regard to other classifiers applied to the
same group of interfaces in other policies.
Higher numbers represent policies with higher
precedence. Policies with higher precedence are
applied before policies with lower precedence.
Precedence values must be unique across policies
that are associated with the same role combination.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.5 |
ntnQosPolicyMeterThis attribute identifies the meter that is
associated with this QoS Policy instance. Meters
are specified in the ntnQosMeterTable and
associated tables. The corresponding instance in
the ntnQosMeter class (i.e., the class instance
where the ntnQosMeterId is equal to the value of
this object) must exist prior to being associated
with a policy entry.
A value of 0 indicates that no metering is
requested.
Version 1/2 attribute.rw IndexIntegerOrZero .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.6 |
ntnQosPolicyActionThis attribute identifies the action that is to
be initiated for flows that are not being metered
and that match the classification criteria specified
via the classifier attributes. The value of this
attribute will not be used (and should be set to
0) when metering is requested. Under this scenario,
the in-profile and out-of-profile actions are
specified through the appropriate ntnQosMeterEntry.
Actions must be defined in the ntnQosBaseActionTable
prior to being referenced by this attribute. A
non-zero value for this attribute must be provided
unless metering is requested.
Version 1/2 attribute.rw IndexIntegerOrZero .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.7 |
ntnQosPolicyNonMatchActionThis attribute identifies the action that is to
be initiated for flows that do not match the
classification criteria being applied to the flow.
Actions must be defined in the ntnQosBaseActionTable
prior to being referenced by this attribute.
Version 1 attribute.rw IndexIntegerOrZero .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.8 |
ntnQosPolicyLabelA label used to reference the QoS policy
entry in a textual manner.
Version 1/2 attribute.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.9 |
ntnQosPolicyStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.
Version 1/2 attribute.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.10 |
ntnQosPolicyStatusThe status of this row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/2 attribute.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.11 |
ntnQosPolicyStatsIdentifies an entry in the Count Action Table
(ntnQosCountActTable) that is used to accumulate
statistics related to traffic processed based
on this policy data. If metering is specified,
the statistics entry identified by this attribute
counts traffic that was deemed to be conformant
(i.e., in-profile).
Version 1/2 attribute.rw IndexIntegerOrZero .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.12 |
ntnQosPolicyStatsTypeThe type of statistics tracking used by this
QoS policy. The value of this attribute dictates
the amount of statistics tracking resources
(i.e., counters) consumed by this policy. A
value of 'individualClfr(1)' means that separate
counters will be allocated, space permitting, for
each classifier referenced by the policy. A value
of 'aggregateClfr(2)' means that a single counter
will be used to accumulate the statistics data
for all the classifiers referenced by the policy.
The value of this attribute is only used when
statistics tracking is enabled for the overall
policy through the ntnQosPolicyStats attribute.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.13 |
ntnQosPolicyInterfaceIndexAn ifIndex value that is used to identify an
interface to which the policy is to be applied.
A policy is associated with an interface explicitly
using this attribute or implicitly using a role
combination through the ntnQosPolicyInterfaceRole
attribute. An interface must be identified by one
and only one of these attributes. This attribute
may identify an interface that does not currently
exist in the system as long as the specified
interface index represents a potentially valid
system interface.
Version 1/2 attribute.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.14 |
ntnQosPolicySessionIdA session identifier used to reference transitory
(volatile) data.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.15 |
ntnQosPolicyVersionVersion indicator for ntnQosPolicyTable.rw VersionIndicator .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.16 |
ntnQosPolicyMeteringModeIdentifies the metering mode associated with
the policy.
A value of 'noMetering(1)' indicates that
metering is not associated with this policy.
A 'policyBasedMetering(2)' value indicates that
traffic identified using this policy is metered
and the metering criteria is directly associated
with the policy.
A 'blockBasedMetering(3)' value indicates that
traffic identified using this policy is metered
and the metering criteria is indirectly associated
with the policy (specified through the classifier
criteria).ro Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.2.1.17 |
ntnQosCountActNextFreeThis object contains an unused value for
ntnQosCountActId, or a zero to indicate that
none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.3 |
ntnQosCountActTableThis table contains counters for all the
traffic passing through a processing element. SEQUENCE OF NtnQosCountActEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.4 |
ntnQosCountActEntryAn entry in the count action table describes
a single set of traffic counters. NtnQosCountActEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.4.1 |
ntnQosCountActIdAn index that enumerates the Count Action
entries. Managers can obtain new index
values for row creation in this table by
reading ntnQosCountActNextFree. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.4.1.1 |
ntnQosCountActOctetsThe number of octets processed by the
associated data path element (e.g., policy,
meter).ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.4.1.2 |
ntnQosCountActPktsThe number of packets processed by the
associated data path element (e.g., policy,
meter).ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.4.1.3 |
ntnQosCountActStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.4.1.4 |
ntnQosCountActStatusThe status of this row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.4.1.5 |
ntnQosCountActSessionIdA session identifier used to reference transitory
(volatile) data.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.4.1.6 |
ntnQosFilterStatsTableThis table contains counters for all the
traffic passing through a processing element
at the policy/filter level. SEQUENCE OF NtnQosFilterStatsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5 |
ntnQosFilterStatsEntryAn entry in the filter statistics table
describes a single set of traffic counters
for a specific policy/filter/interface
combination. NtnQosFilterStatsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5.1 |
ntnQosFilterStatsPolicyIdAn index component that identifies the
policy associated with this Filter Statistics
entry. This attribute has the same value as
the ntnQosPolicyId attribute with which it
is associated. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5.1.1 |
ntnQosFilterStatsFilterIdAn index component that identifies the filter
instance within a specific policy (as identified
by the ntnQosFilterStatsPolicyId attribute) that
is associated with this Filter Statistics entry.
If the identified policy references an individual
classifier (as specified by the QoS Policy Table
ntnQosPolicyClassifierType attribute), the value of
this attribute will be the referenced classifier
component set ID. If a block of classifiers is
specified, the value of this attribute will be
the classifier component set identifier referenced
by the block member.
A special value (0) for this attribute indicates
that aggregate, not individual, statistics are
being maintained for the referenced policy. In
this case, the filter ID of 0 should be thought
of as a wildcard identifying all the classifiers
associated with the policy. IndexIntegerOrZero .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5.1.2 |
ntnQosFilterStatsInterfaceIdAn index component that identifies the interface
index referenced by the specific policy (as identified
by the ntnQosFilterStatsPolicyId attribute) that
is associated with this Filter Statistics entry. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5.1.3 |
ntnQosFilterStatsInProfileOctetsThe number of octets considered to be in-profile
that have been processed by the associated data
path classifier.ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5.1.4 |
ntnQosFilterStatsInProfilePktsThe number of packets considered to be in-profile
that have been processed by the associated data
path classifier.ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5.1.5 |
ntnQosFilterStatsOutOfProfileOctetsThe number of octets considered to be out-of-profile
that have been processed by the associated data
path classifier.ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5.1.6 |
ntnQosFilterStatsOutOfProfilePktsThe number of packets considered to be out-of-profile
that have been processed by the associated data
path classifier.ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5.1.7 |
ntnQosFilterStatsStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5.1.8 |
ntnQosFilterStatsStatusThe status of this row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.5.1.9 |
ntnQosPolicyDiagsTableThis table contains attributes used to track
the current level of hardware resource consumption
related to installed policy data on an interface. SEQUENCE OF NtnQosPolicyDiagsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6 |
ntnQosPolicyDiagsEntryAn entry in the QoS policy diagnostics table
describes a single set of resource utilization
data, related to installed policy data and
non-policy data that still consumes policy
resources, for a given interface. NtnQosPolicyDiagsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1 |
ntnQosPolicyDiagsMasksConsumedTracks the current number of classification
masks in-use, due to installed policy and
filter data, for a given interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.1 |
ntnQosPolicyDiagsFiltersConsumedTracks the current number of filters (i.e.,
rules) in-use, due to installed filter data,
for a given interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.2 |
ntnQosPolicyDiagsMetersConsumedTracks the current number of meters in-use,
due to installed policy data, for a given
interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.3 |
ntnQosPolicyDiagsNonQosMasksConsumedTracks the current number of classification
masks in-use, not due to installed policy and
filter data, for a given interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.4 |
ntnQosPolicyDiagsNonQosFiltersConsumedTracks the current number of filters (i.e.,
rules) in-use, not due to installed filter
data, for a given interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.5 |
ntnQosPolicyDiagsNonQosMetersConsumedTracks the current number of meters in-use,
not due to installed policy data, for a given
interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.6 |
ntnQosPolicyDiagsCountersConsumedTracks the current number of counters in-use
for a given interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.7 |
ntnQosPolicyDiagsTotalMasksAvailTracks the total number of classification
masks available for a given interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.8 |
ntnQosPolicyDiagsTotalFiltersAvailTracks the total number of filters (i.e.,
rules) available for a given interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.9 |
ntnQosPolicyDiagsTotalMetersAvailTracks the total number of meters available
for a given interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.10 |
ntnQosPolicyDiagsTotalCountersAvailTracks the total number of counters available
for a given interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.6.1.11 |
ntnQosPolicyPrecResDiagsTableThis table contains attributes used to track
the current level of hardware resource consumption
related to installed policy data for a given
precedence level and interface when resources
are centrally allocated. SEQUENCE OF NtnQosPolicyPrecResDiagsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7 |
ntnQosPolicyPrecResDiagsEntryAn entry in the QoS policy precedence resource
diagnostics table describes a single set of resource
utilization data, related to installed policy data
and non-policy data that still consumes policy
resources, for a given precedence level and
interface. NtnQosPolicyPrecResDiagsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1 |
ntnQosPolicyPrecResDiagsPrecThe precedence value for which resource data
is being returned. In a centralized architecture,
a specific precedence value is typically associated
with a bank or slice of filter (rule), meter and
counter resources. Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.1 |
ntnQosPolicyPrecResDiagsInterfaceThe ifIndex value that is associated with this
instance of the ntnQosPolicyPrecResDiagsEntry. The
ifIndex value of this attribute corresponds to the
ifTable entry with the same ifIndex value.
When resources are centrally allocated and not
port-based, a series of interfaces is typically
associated with a bank or slice of filter (rule),
meter and counter resources. Interfaces associated
with the same slice will have the same values for
the returned resource usage data. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.2 |
ntnQosPolicyPrecResDiagsKeysConsumedTracks the current number of classification
keys in-use, due to installed policy and
filter data, for a given precedence level and
interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.3 |
ntnQosPolicyPrecResDiagsFiltersConsumedTracks the current number of filters (i.e.,
rules) in-use, due to installed filter data,
for a given precedence level and interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.4 |
ntnQosPolicyPrecResDiagsMetersConsumedTracks the current number of meters in-use,
due to installed policy data, for a given
precedence level and interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.5 |
ntnQosPolicyPrecResDiagsNonQosKeysConsumedTracks the current number of classification
keys in-use, not due to installed policy and
filter data, for a given precedence level and
interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.6 |
ntnQosPolicyPrecResDiagsNonQosFiltersConsumedTracks the current number of filters (i.e.,
rules) in-use, not due to installed filter
data, for a given precedence level and interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.7 |
ntnQosPolicyPrecResDiagsNonQosMetersConsumedTracks the current number of meters in-use,
not due to installed policy data, for a given
precedence level and interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.8 |
ntnQosPolicyPrecResDiagsCountersConsumedTracks the current number of counters in-use
for a given precedence level and interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.9 |
ntnQosPolicyPrecResDiagsTotalKeysAvailTracks the total number of classification
keys available for a given precedence level
and interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.10 |
ntnQosPolicyPrecResDiagsTotalFiltersAvailTracks the total number of filters (i.e.,
rules) available for a given precedence level
and interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.11 |
ntnQosPolicyPrecResDiagsTotalMetersAvailTracks the total number of meters available
for a given precedence level and interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.12 |
ntnQosPolicyPrecResDiagsTotalCountersAvailTracks the total number of counters available
for a given precedence level and interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.13 |
ntnQosPolicyPrecResDiagsRangeChkElemsConsumedTracks the number of range check elements currently
consumed for a given precedence level and interface.
Note that range check resources may be centrally
allocated (not interface-based) meaning that the
resource usage data may be the same across the
precedence levels/interfaces that share the resource.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.14 |
ntnQosPolicyPrecResDiagsApplicationIdUsedTracks the Id of application in-use for a
given precedence level and interface.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.15 |
ntnQosPolicyPrecResDiagsApplicationNameUsedThe name of application in-use for a
given precedence level and interface.ro SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.16 |
ntnQosPolicyPrecResDiagsRangeChkElemsAvailTracks the total number of range check elements
available for a given port cluster.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.8.7.1.17 |
ntnQosInterfaceClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.9 |
ntnQosIfAssignmentTableContains interface index to interface role
combination associations. SEQUENCE OF NtnQosIfAssignmentEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.1 |
ntnQosIfAssignmentEntryA conceptual row in the ntnQosIfAssignmentTable.
Each row identifies an interface value that
corresponds to an entry in the ifTable (MIB-II)
and a role combination with which the interface
is associated. NtnQosIfAssignmentEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.1.1 |
ntnQosIfAssignmentIfIndexThe ifIndex value that is associated with this
instance of the ntnQosIfAssignmentEntry. The ifIndex
value of this attribute must correspond to the
ifTable entry with the same ifIndex value. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.1.1.1 |
ntnQosIfAssignmentRoleCombinationThe role combination that is associated with the
interface with an ifIndex value that is equal to
ntnQosIfAssignmentIfIndex.rw RoleCombination (POLICY-FRAMEWORK-PIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.1.1.2 |
ntnQosIfAssignmentQueueSetThe queue set associated with this interface. A
queue set must be defined in the ntnQosIfQueueTable
prior to being referenced by this attribute.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.1.1.3 |
ntnQosIfAssignmentStorageThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosIfAssignmentStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.1.1.4 |
ntnQosIfAssignmentStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.1.1.5 |
ntnQosIfAssignmentCapabilitiesAn enumeration of interface capabilities. Used by the
PDP or network manager to select which policies and
configuration it should push to the PEP. Also used to
derive the capabilities that are common across several
interfaces.ro Bits .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.1.1.6 |
ntnQosIfQueueTableContains information about the individual queues that
comprise a queue set implemented on the device. SEQUENCE OF NtnQosIfQueueEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2 |
ntnQosIfQueueEntryA conceptual row in the ntnQosIfQueueTable.
Each row identifies a specific queue within a given
queue set and contains detailed information about the
queue. Queues are associated with a given set through
this table and a queue set is associated with an
interface through the ntnQosIfAssignmentTable. NtnQosIfQueueEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1 |
ntnQosIfQueueIdAn index that uniquely identifies an entry in the
ntnQosIfQueueTable. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.1 |
ntnQosIfQueueSetIdAn index that uniquely identifies a specific queue set. The
queue set that is identified with this value is associated
with an interface through the ntnQosIfAssignmentQueueSet
object in the ntnQosIfAssignmentTable. The individual queues
that are members of this set all have the same value for
this attribute (i.e., they have the same set ID).rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.2 |
ntnQosIfQueueIndexAn arbitrary index that uniquely identifies a specific
queue within a set of queues that is identified by the
ntnQosIfQueueSetId value.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.3 |
ntnQosIfQueueDisciplineThis object identifies the queuing discipline that is
associated with the specified queue.
A value of fifo(1) indicates that the queue is serviced
on a first-in-first-out (FIFO) basis. This discipline is
generally employed when only a single queue is available
for a given interface.
A value of pq(2) indicates that the queue is serviced
using a priority queuing discipline. This technique is
used when several queues are available for a given
interface. Each queue is assigned a priority and queues
are serviced in order of priority. Higher priority queues
are completely drained before lower priority queues are
serviced.
A value of fq(3) indicates that the queue is serviced
using a fair queuing discipline. This technique is used
when several queues are available for a given interface.
Each queue is treated equally and is serviced in a
round-robin fashion.
A value of wfq(4) indicates that the queue is serviced
using a weighted fair queuing discipline. This technique is
used when several queues are available for a given interface.
Each queue is serviced based on queue weights which determine
the scheduling and frequency of queue servicing. Queues that
are assigned a greater weight are implicitly provided with
more bandwidth.
A value of wrr(5) indicates that the queue is serviced
using a weighted round robin discipline. This technique is
used when several queues are available for a given interface.
Each queue is serviced based on queue weights which determine
the scheduling and frequency of queue servicing. Queues that
are assigned a greater weight are implicitly provided with
more bandwidth.
Note that the processing disciplines for all of the queues
in a given set must be considered when trying to establish
a processing profile for a given interface.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.4 |
ntnQosIfQueueDrainSizeThe maximum number of bytes that may be drained from the
queue in one cycle. The percentage of the interface
bandwidth allocated to this queue can be calculated from
this attribute and the sum of the drain sizes of all the
queues in a specific queue cluster in a queue set.
This attribute represents the relative bandwidth that is
available to a given queue with respect to other queues with
which it is associated. The absolute bandwidth that is
available to a given queue is specified by the attribute
ntnQosIfQueueAbsBandwidth. Which of these two applies is
specified by the attribute ntnQosIfQueueBandwidthAllocation.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.5 |
ntnQosIfQueueAbsBandwidthThe maximum interface bandwidth that is available for
consumption when servicing this queue. This bandwidth is
specified in terms of kilobits per second.
This attribute represents the absolute bandwidth that is
available to a given queue. The relative bandwidth that is
available to a given queue, with respect to other queues with
which it is associated, is specified by the attribute
ntnQosIfQueueDrainSize. Which of these two applies is specified
by the attribute ntnQosIfQueueBandwidthAllocation.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.6 |
ntnQosIfQueueBandwidthAllocationThis attribute specifies whether to configure the queue for
an absolute bandwidth limit or one that is relative to other
queues of the interface. i.e., whether to configure the queue
using ntnQosIfQueueAbsBandwidth or ntnQosIfQueueDrainSize.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.7 |
ntnQosIfQueueServiceOrderThis object is used to provide an additional level of
priority that is required for certain queuing disciplines
and when the different queues that comprise a queue set
are serviced using a mix of queuing disciplines. This
object can be used to specify, for example, the order in
which queues will be serviced when priority queuing is
used. It also supports the ability to describe the
servicing hierarchy when a hybrid queuing scheme, such
as priority queuing coupled with weighted fair queuing,
is used.
Queue service priority is assigned such that a lower
service order value indicates a higher priority. For
example, a priority queue with a value of 1 will be
serviced (i.e., drained) before another priority queue
with a service order value of 2.
Note that multiple queues that are logically associated,
based on the queuing discipline that is being employed,
will be assigned the same service order value. Under
this scenario, other parameters that are related to the
queuing discipline determine the order of queue servicing
(e.g., queue drain size is used for 'wfq').
For example, an interface that is associated with a queue
set supporting two priority queues and three queues that
are serviced using WFQ would be modeled as follows:
Q Index Q Discipline Q Drain Size Q Service Order
22 pq(1) - 1
23 pq(1) - 2
24 wfq(3) 500 3
25 wfq(3) 350 3
26 wfq(3) 150 3
The queue set presented in this example would service
all queued traffic in queue 22 first, followed by all of
the queued traffic in queue 23. Next the queued traffic
in queues 24 through 26 would be serviced in a round
robin fashion with queue 24 receiving 50% of the available
bandwidth, queue 25 receiving 35% of the available
bandwidth and queue 26 receiving 15% of the available
bandwidth. This example is presented for expository
purposes and has been simplified accordingly.
Note that, in this example, queues 24, 25 and 26 form a
queue cluster. Members of a queue cluster are all assigned
the same ntnQosIfQueueServiceOrder as there are tightly
coupled. The ntnQosIfQueueDrainSize attribute is used to
determine the additional processing characteristics of
the individual queues in a cluster.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.8 |
ntnQosIfQueueSizeThe size of the queue in bytes. Some devices set queue size
in terms of packets. These devices must calculate the queue
size in packets by assuming an average packet size suitable
for the particular interface.
Some devices have a fixed size buffer to be shared among all
queues. These devices must allocate a fraction of the
total buffer space to this queue calculated as the the ratio
of the queue size to the sum of the queue sizes for the
interface.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.9 |
ntnQosIfQueueStorageThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosIfQueueStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.10 |
ntnQosIfQueueStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.2.1.11 |
ntnQosInterfaceRoleNextFreeThis object contains an unused value for
ntnQosInterfaceRoleId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.3 |
ntnQosInterfaceRoleTableInterface role definitions. This class describes the
interface roles that exist on the device. An interface
role is denoted by its designated role identifier. SEQUENCE OF NtnQosInterfaceRoleEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.4 |
ntnQosInterfaceRoleEntryAn instance of this class describes the characteristics
of an interface role. Interface role characteristics
include a role identifier, an interface class designation
and a filter capabilities attribute. NtnQosInterfaceRoleEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.4.1 |
ntnQosInterfaceRoleIdAn arbitrary integer index that uniquely identifies a
instance of the ntnQosInterfaceRole class. Class instances
may not be contiguous. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.4.1.1 |
ntnQosInterfaceRoleRoleThe role that is used to identify interfaces
with the characteristics specified by the attributes
of this class instance. Interface role combination
identifiers are used within a number of classes to
logically identify a physical set of interfaces to
which policy rules and actions are applied. Role
combinations are comprised of one or more roles defined
in this table. Role identifiers must exist in this
table prior to being referenced in other class instances.rw Role (POLICY-FRAMEWORK-PIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.4.1.2 |
ntnQosInterfaceRoleIfClassA value describing the overall classification of
traffic received on interfaces with the given role.
Traffic received on trusted interfaces may be
processed differently and be subject to different
restrictions that traffic received on non-trusted
interfaces. The treatment of traffic based on interface
class is implementation dependent.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.4.1.3 |
ntnQosInterfaceRoleCapabilitiesAn enumeration of interface capabilities. Used by the
PDP or network manager to select which policies and
configuration it should push to the PEP.rw Bits .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.4.1.4 |
ntnQosInterfaceRoleStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosInterfaceRoleStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.4.1.5 |
ntnQosInterfaceRoleStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.4.1.6 |
ntnQosInterfaceRoleStatsTrackingTypeThe value of this attribute determines if
statistics tracking is enabled for system-level
policies associated with the designated role.
The ntnQosConfigTrackStatistics attribute value
at the time the role is created provides the
default value for this object.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.4.1.7 |
ntnQosUserRoleTableUser role definitions. This class describes the
user roles that exist on the device. User roles
associate a user and role with a single interface. SEQUENCE OF NtnQosUserRoleEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5 |
ntnQosUserRoleEntryAn instance of this class describes the characteristics
of an user role. User role characteristics include a role
combination, a user and group name and user session
attributes, such as a session identifier and a session
initiation timestamp. NtnQosUserRoleEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5.1 |
ntnQosUserRoleIfIndexThe ifIndex value that is associated with this
instance of the ntnQosUserRoleEntry. The ifIndex
value of this attribute must correspond to an
ifTable entry with the same ifIndex value. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5.1.1 |
ntnQosUserRoleRoleCombinationThe role combination that is associated with the
interface with an ifIndex value that is equal to
ntnQosUserRoleIfIndex and the user identified by
the ntnQosUserRoleUserName attribute.
A user role combination is used to logically identify
a physical interface to which policy rules and actions
can be applied. The role combination string must be
unique from any other role combinations defined in
system.rw RoleCombination (POLICY-FRAMEWORK-PIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5.1.2 |
ntnQosUserRoleUserNameThe user name identifying the user that is currently
associated with this user role (i.e., ifIndex and
role combination) information.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5.1.3 |
ntnQosUserRoleUserGroupThe user group with which the user, identified by
the ntnQosUserRoleUserName attribute, is associated.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5.1.4 |
ntnQosUserRoleSessionIdThe system-assigned session identifier used to
track instances of this user role entry (i.e., the
user role entry for a specific interface and user).ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5.1.5 |
ntnQosUserRoleSessionStartThe system-assigned session start timestamp. The
value of this attribute corresponds to the value of
the sysUpTime attribute, coverted to seconds, at the
instant that this user role entry is created and/or
updated.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5.1.6 |
ntnQosUserRoleSessionGroupThe system-assigned session group identifier. Multiple
user sessions belong to the same group if they share
the same role combination and have the same value for
this attribute. This session group value is associated
with installed policy criteria to unambiguously identify
the users and interfaces to which QoS policy is being
applied.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5.1.7 |
ntnQosUserRoleStorageThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosUserRoleStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5.1.8 |
ntnQosUserRoleStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.5.1.9 |
ntnQosIfShapingTableIdentifies shaping criteria that is to be applied
to a specific interface. SEQUENCE OF NtnQosIfShapingEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.6 |
ntnQosIfShapingEntryA conceptual row in the ntnQosIfShapingTable.
Each row identifies an interface value that
corresponds to an entry in the ifTable (MIB-II)
and shaping criteria with which the interface
is associated. NtnQosIfShapingEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.6.1 |
ntnQosIfShapingIfIndexThe ifIndex value that is associated with this
instance of the ntnQosIfShapingEntry. The ifIndex
value of this attribute must correspond to the
ifTable entry with the same ifIndex value. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.6.1.1 |
ntnQosIfShapingSpecificThis indicates the shaping behavior to be applied
by pointing to an entry containing detailed
parameters. Note that entries in that specific
table must be managed explicitly.
For example, ntnQosIfShapingSpecific may point to
an entry in ntnQosTBParamTable, which contains
an instance of a single set of Token Bucket
parameters.
Entries in other tables must exist prior to
being referenced. It may be permissible to
create component table entries and the entries
being referenced in the same request. Referenced
entries may not be deleted while still
referenced by an active entry in this table.rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.6.1.2 |
ntnQosIfShapingLabelA label used to reference the interface shaping
data in a textual manner.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.6.1.3 |
ntnQosIfShapingStorageThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosIfShapingStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.6.1.4 |
ntnQosIfShapingStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.6.1.5 |
ntnQosCosShapingTableIdentifies shaping criteria that is to be applied
to a specific interface's CoS queues. SEQUENCE OF NtnQosCosShapingEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.7 |
ntnQosCosShapingEntryA conceptual row in the ntnQosCosShapingTable.
Each row identifies an interface value that
corresponds to an entry in the ifTable (MIB-II),
a CoS value and shaping criteria with which the
interface-CoS tuple is associated. NtnQosCosShapingEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.7.1 |
ntnQosCosShapingIfIndexThe ifIndex value that is associated with this
instance of the ntnQosCosShapingEntry. The ifIndex
value of this attribute must correspond to the
ifTable entry with the same ifIndex value. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.7.1.1 |
ntnQosCosShapingCosThe IEEE 802 CoS value that is associated with this
instance of the ntnQosCosShapingEntry. QosIeee802Cos .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.7.1.2 |
ntnQosCosShapingSpecificThis indicates the shaping behavior to be applied
by pointing to an entry containing detailed
parameters. Note that entries in that specific
table must be managed explicitly.
For example, ntnQosCosShapingSpecific may point to
an entry in ntnQosTBParamTable, which contains
an instance of a single set of Token Bucket
parameters.
Entries in other tables must exist prior to
being referenced. It may be permissible to
create component table entries and the entries
being referenced in the same request. Referenced
entries may not be deleted while still
referenced by an active entry in this table.rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.7.1.3 |
ntnQosCosShapingLabelA label used to reference the CoS shaping
data in a textual manner.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.7.1.4 |
ntnQosCosShapingStorageThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosCosShapingStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.7.1.5 |
ntnQosCosShapingStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.7.1.6 |
ntnQosQueueShapingTableIdentifies shaping criteria that is to be applied
to a specific interface's egress queues. SEQUENCE OF NtnQosQueueShapingEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.8 |
ntnQosQueueShapingEntryA conceptual row in the ntnQosQueueShapingTable.
Each row identifies an interface value that
corresponds to an entry in the ifTable (MIB-II),
a queue identifier and shaping criteria with
which the interface-queue tuple is associated. NtnQosQueueShapingEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.8.1 |
ntnQosQueueShapingIfIndexThe ifIndex value that is associated with this
instance of the ntnQosQueueShapingEntry. The ifIndex
value of this attribute must correspond to the
ifTable entry with the same ifIndex value. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.8.1.1 |
ntnQosQueueShapingQueueThe specific queue, within the queue set that is
associated with the interface identified by the
ntnQosQueueShapingIfIndex value, on which traffic
is to be shaped. The value of this attribute
corresponds to the ntnQosIfQueueIndex for the
specified queue within the queue set (defined in
the ntnQosIfQueueTable).
The range of acceptable values for this attribute
is dictated by the current queue set parameters
for the system, as defined by the QoS configuration
attribute ntnQosConfigDefaultQueueCfg. Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.8.1.2 |
ntnQosQueueShapingSpecificThis indicates the shaping behavior to be applied
by pointing to an entry containing detailed
parameters. Note that entries in that specific
table must be managed explicitly.
For example, ntnQosQueueShapingSpecific may point to
an entry in ntnQosTBParamTable, which contains
an instance of a single set of Token Bucket
parameters.
Entries in other tables must exist prior to
being referenced. It may be permissible to
create component table entries and the entries
being referenced in the same request. Referenced
entries may not be deleted while still
referenced by an active entry in this table.rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.8.1.3 |
ntnQosQueueShapingLabelA label used to reference the queue shaping
data in a textual manner.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.8.1.4 |
ntnQosQueueShapingStorageThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosQueueShapingStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.8.1.5 |
ntnQosQueueShapingStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.9.8.1.6 |
ntnQosMappingClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.10 |
ntnQosDscpToCosTableMaps each DSCP to an IEEE COS value. SEQUENCE OF NtnQosDscpToCosEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.1 |
ntnQosDscpToCosEntryAn instance of the ntnQosDscpToCos class. A total of 64
class instances are constantly maintained (i.e., entries
may be modified but not added or deleted) in this table. NtnQosDscpToCosEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.1.1 |
ntnQosDscpToCosIdA unique identifier for this DSCP-to-COS mapping. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.1.1.1 |
ntnQosDscpToCosDscpThe DSCP attribute that is used to determine the
appropriate Layer 2 COS value for mapping purposes.
DSCP values 0 through 63 (inclusive) are maintained
in the table.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.1.1.2 |
ntnQosDscpToCosCosThe IEEE 802 COS value to use when mapping the DSCP
value specified by the ntnQosDscpToCosDscp attribute
to a IEEE 802 COS.rw QosIeee802Cos .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.1.1.3 |
ntnQosDscpToCosDropPrecThe relative drop precedence value to use when mapping
the DSCP value specified by the ntnQosDscpToCosDscp
attribute to a drop precedence. During times of congestion,
packets with a hign drop precedence are discarded before
those with a low drop precedence.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.1.1.4 |
ntnQosDscpToCosLabelA label used to logically identify the mapping.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.1.1.5 |
ntnQosDscpToCosStorageThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosDscpToCosStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.1.1.6 |
ntnQosDscpToCosStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.1.1.7 |
ntnQosDscpToCosNewDscpSpecifies a new DSCP value to be used when DSCP
mutation (i.e., translation) is required.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.1.1.8 |
ntnQosCosToDscpTableMaps each of eight Layer 2 COS values to a DSCP. SEQUENCE OF NtnQosCosToDscpEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.2 |
ntnQosCosToDscpEntryAn instance of the ntnQosCosToDscp class. A total of 8
class instances are constantly maintained (i.e., entries
may be modified but not added or deleted) in this table. NtnQosCosToDscpEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.2.1 |
ntnQosCosToDscpIdA unique identifier for this COS-to-DSCP mapping. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.2.1.1 |
ntnQosCosToDscpCosThe Layer 2 COS class instance attribute that is used to
determine the appropriate DSCP mappings. COS values 0
through 7 (inclusive) are maintained in the table.rw QosIeee802Cos .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.2.1.2 |
ntnQosCosToDscpDscpThe DSCP value to use when mapping the Layer 2 COS value
specified by the ntnQosCosToDscpCos attribute to a DSCP.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.2.1.3 |
ntnQosCosToDscpLabelA label used to logically identify the mapping.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.2.1.4 |
ntnQosCosToDscpStorageThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosCosToDscpStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.2.1.5 |
ntnQosCosToDscpStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.2.1.6 |
ntnQosMappingClassesScalars OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.3 |
ntnQosMappingRestoreDefaultThe object is used to restore factory default values
for the ntnQosDscpToCosTable and the ntnQosCosToDscpTable.
Setting the object to dscpToCos(2) will restore the
ntnQosDscpToCosTable to its factory default state, and
will restore the value of ntnQosMappingDscpToCosEnabled
to its factory default value.
Setting the object to cosToDscp(2) will restore the
ntnQosCosToDscpTable to its factory default state, and
will restore the value of ntnQosMappingCosToDscpEnabled
to its factory default value.
Setting the value to other(1) has no effect. The value
when retrieved is always other(1).rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.3.1 |
ntnQosMappingDscpToCosEnabledThis object controls whether the ntnQosDscpToCosTable
is enabled. If the value is false(2), any configuration
in that table will be ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.3.2 |
ntnQosMappingCosToDscpEnabledThis object controls whether the ntnQosCosToDscpTable
is enabled. If the value is false(2), any configuration
in that table will be ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.10.3.3 |
ntnQosPolicyAgtClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.11 |
ntnQosPrcSupportTableEach instance of this class specifies a PRC that the device
supports and a bit string to indicate the attributes of the
class that are supported. SEQUENCE OF NtnQosPrcSupportEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.1 |
ntnQosPrcSupportEntryAn instance of the ntnQosPrcSupport class that identifies a
specific policy class and associated attributes as supported
by the device. NtnQosPrcSupportEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.1.1 |
ntnQosPrcSupportIdAn arbitrary integer index that uniquely identifies an
instance of the ntnQosPrcSupport class. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.1.1.1 |
ntnQosPrcSupportSupportedPrcThe object identifier of a supported PRC. There may not
be more than one instance of the ntnQosPrcSupport class with
the same value of ntnQosPrcSupportSupportedPrc.ro OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.1.1.2 |
ntnQosPrcSupportSupportedAttrsA bit string representing the supported attributes of the
class that is identified by the ntnQosPrcSupportSupportedPrc
object.
Each bit of this bit mask corresponds to a class attribute,
with the most significant bit of the i-th octet of this octet
string corresponding to the (8*i - 7)-th attribute, and the
least significant bit of the i-th octet corresponding to the
(8*i)-th class attribute. Each bit of this bit mask specifies
whether or not the corresponding class attribute is currently
supported, with a '1' indicating support and a '0' indicating
no support. If the value of this bit mask is N bits long and
there are more than N class attributes then the bit mask is
logically extended with 0's to the required length.ro OCTET STRING .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.1.1.3 |
ntnQosPrcSupportMaxPrisA non-negative value indicating the maximum numbers of
policy rule instances that can be installed in the identified
policy rule class. Note that actual number of instances that
can be installed in a PRC at any given time may be less than
this value based on the current operational state (e.g.,
resources currently consumed) of the device.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.1.1.4 |
ntnQosPrcSupportCurrentPrisThe current numbers of class instances.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.1.1.5 |
ntnQosPolicyDeviceIdentTableThis class contains a single policy rule instance that
contains device-specific information. SEQUENCE OF NtnQosPolicyDeviceIdentEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.2 |
ntnQosPolicyDeviceIdentEntryAn instance of the ntnQosPolicyDeviceIdent class. Only
one instance of this policy class is ever instantiated. NtnQosPolicyDeviceIdentEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.2.1 |
ntnQosPolicyDeviceIdentIdAn index to uniquely identify an instance of this
policy class. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.2.1.1 |
ntnQosPolicyDeviceIdentDescrA textual description of the policy agent. This
value should include the name and version identification
of the policy agent hardware and software.ro SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.2.1.2 |
ntnQosPolicyDeviceIdentMaxMsgThe maximum message size, in octets, that the device
is capable of processing.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.2.1.3 |
ntnQosConfigResetToDefaultsAll installed QoS policy state information can
be deleted and reset to the device's default
state by setting the value of this object to
'true(1)'. The value 'false(2)' will always be
returned when querying this object.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.3 |
ntnQosConfigTrackStatisticsThe value of this attribute determines if
statistics tracking is enabled for system-level
policies. System-level policies are created to
enforce the default QoS processing rules
associated with 'trusted' and 'untrusted'
interface classes.
This attribute is consulted during system
policy creation. Setting this object to
'disabled(1)' causes statistics tracking to be
disabled for the system-level policy being created.
No statistics counter resources will be consumed.
Setting this attribute to 'individual(2)' causes
individual counters to be allocated for each
classifier that comprises the system-level policy.
A value of 'aggregate(3)' causes a single
statistics counter to be allocated to track data
associated with all of the classifiers that
comprise the system policy.
The value of this attribute is consulted when
a policy is created or reinstalled. This allows
the filter statistics tracking to be enabled
only when deemed necessary.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.4 |
ntnQosConfigNVCommitDelaySpecifies the maximum amount of time, in seconds,
before non-volatile QoS configuration data will be
written to non-volatile storage. Delaying NV access
can be used to minimize file I/O aiding agent efficiency
if a large amount of QoS data is being configured.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.5 |
ntnQosConfigDefaultQueueCfgThe value of this attribute determines the queue
set that is associated with all egress interfaces
by default.
A queue set is characterized by the number of
queues in the set, how the queues are serviced,
the queue weights and the buffer resources that
are associated with the inidividual queues. All
queue sets are defined in the ntnQosIfQueueTable.
The value of this attribute is consulted when
the system is initialized. Changing the value of
this attribute will therefore not take effect
until after the system is restarted.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.6 |
ntnQosConfigDefaultBufferingCapsThe value of this attribute determines the method
through which buffering resources are allocated to
ports sharing a pool of buffers.
The buffering resources associated with a series
of ports are finite. This buffer pool may be
statistically allocated to the individual ports
sharing the pool or they may be allocated such that
the traffic pattern dictates which ports temporarily
consume the majority of the buffers.
The value of this attribute determines the level
of buffer sharing or over-allocation that can take
place among ports sharing a buffer pool. Higher
levels of over-allocation increase the likelyhood
(under heavy load) of a relatively few number of
ports consuming all the buffers in a pool, causing
packets to be dropped on other ports due to buffer
starvation.
A value of 'minimumOverAllocation(1)' indicates
that only a small amount of resource sharing is
allowed. Greater resource sharing is allowed if the
value of this attribute is 'mediumOverAllocation(2)'
and the chance of over-allocation occurring is
maximized by the specifying that 'maximumOverAllocation(3)'
is desired.
In lossless mode, the buffer allocation and thresholds
are such that pause frames are generated to the endstations
prior to frames being discarded due to lack of available
buffers, allowing the end stattions to back off. This
mode allows for lossless behavior at the expense of throughput.
Lossless PFC mode operates in a similar fashion to
lossless but provides the service on a per-priority
(802.1p) basis.
'spb-scaled(6)' is a mode similar to 'mediumOverAllocation(2)',
but optimized for scaled SPB setups.
The value of this attribute is consulted when
the system is initialized. Changing the value of
this attribute will therefore not take effect
until after the system is restarted.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.7 |
ntnQosConfigUBPSupportLevelDetermines whether QoS Agent User Based Policy
(UBP) support is enabled and, if so, what level
of support is enabled. Setting the value of this
attribute to 'ubpSupportDisabled(1)' will cause
user information forwarded by other applications
(e.g., EAP) to be ignored by the QoS Agent.
A value of 'ubpSupportHighSecurityLocalData(2)'
or 'ubpSupportLowSecurityLocalData(3)' will cause
the internal QoS Agent database to be searched for
user-specific classification data when user
information is forwarded by other applications.
When a high level of security is requested, user-
specific classification data that is found must be
successfully installed before a user is given
access to the switch. A low level of security
means that a user will be given access to the
switch even if the resources to install user-
specific classification data are not currently
available.
Lastly, a value of 'ubpSupportEPMData(4)' will
cause notifications to be generated for Enterprise
Policy Manager (EPM) consumption based on user
information forwarded by other applications.
Notifications will be generated for events of
interest to EPM, such as user addition/deletion
that is associated with User Based Policy (UBP)
support. Notifications will not be generated
otherwise. Note that the information that is
necessary to construct and transmit a notification
must also be configured for this value to be
useful.
Changing the value of this attribute will cause
UBP data currently in-use to be lost.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.8 |
ntnQosConfigRoleAssocCompatLevelDetermines whether interface role associations
are subject to loose or strict capabilities
verification. Setting the value of this attribute
to 'roleAssocCompatLoose(1)' means that interfaces
with different capabilities may be associated with
the same role. In this case, configuration issues
may arise due to these differences. Setting the
value to 'roleAssocCompatStrict(2)' means that
only interfaces with compatible capabilities may
be associated with the same role. This mode can
be used to avoid configuration issues resulting
from the interfaces assigned to a role not having
the same underlying capabilities.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.9 |
ntnQosConfigDappEnableDictates whether the DoS Attack Prevention Package
(DAPP) is enabled on all applicable ports and, when
enabled, if resources will be allocated to track and
report on DoS attack detection. If the attribute
value is 'disable(1)', DAPP support will be disabled.
A value of 'enableWithoutStatusTracking(2)' will
cause the DAPP support to be enabled on all ports
that are DAPP-capable. No resources will be allocated
to track the DoS attack detection status. No log
messages and no SNMP Traps will be generated based on
the DAPP support.
A value of 'enableWithStatusTracking(3)' will cause
resources to be verified and consumed prior to enabling
DoS attack detection support on DAPP-capable ports.
Support will not be enabled if adequate resources are
not available. Assuming that resources are available,
log messages and SNMP Traps will be generated on a
per-unit basis when a DoS attack is identified by the
detection logic.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.10 |
ntnQosConfigDappMinTcpHdrSizeDAPP minimum TCP header length allowed. Used when
performing TCP fragment validation. IPv4 TCP first
fragment packets will be dropped if the TCP header
(IP payload) is less than this value.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.11 |
ntnQosConfigDappIpv4IcmpMaxLengthDAPP maximum IPv4 ICMP length. Used when performing
ICMP validation. IPv4 ICMP packets will be dropped
if the length (IP payload) exceeds this value.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.12 |
ntnQosConfigDappIpv6IcmpMaxLengthDAPP maximum IPv6 ICMP length. Used when performing
ICMP validation. IPv6 ICMP packets will be dropped
if the length exceeds this value.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.13 |
ntnQosConfigNtApplicationModeControls NT Application Mode processing. When enabled,
identified NT application traffic will be given preferential
treatment over non-NT application traffic. 'Mixed' mode
processing will remove any special traffic markings at
egress. 'Pure' mode processing will leave any special
traffic markings intact at egress. Mode changes (updates
to the value of this attribute) will take effect immediately.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.14 |
ntnQosConfigQosOperModeControls overall QoS processing for the system. When
enabled, all QoS functionality can be exercised by the
user. When disabled, installed QoS components are
temporarily removed (until the operational mode is
re-enabled) and new requested QoS operations will be
rejected. The QoS operational mode can not be disabled
if QoS components are currently being used by non-QoS
applications. If disabled, requests related to QoS
components by non-QoS applications will be rejected.
Note that re-enabling the QoS operational mode may
result in errors if changes have been made affecting
available resources while QoS was temporarily disabled.
Mode changes (updates to the value of this attribute)
will take effect immediately.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.15 |
ntnQosConfigTrustedProcessingModeControls filter usage related to Trusted interface
class processing on platforms using filters to support
treating traffic as trusted. A mode of 'partialDscpMapping(1)'
causes filters to be installed that only support mapping of
industry standard DSCP values. This is the default setting.
A mode of 'fullDscpMapping(2)' causes filters to be installed
mapping all possible DSCP values in support of Trusted
interface class processing.
A reset may be required for updates of this object to
take effect.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.16 |
ntnQosConfigResetToPartialDefaultsMost installed QoS policy state information can
be deleted and reset to the device's default state
by setting the value of this object to 'true(1)'.
QoS data that requires a system reset to take effect
(e.g., ntnQosConfigDefaultQueueCfg) is not reset to
a default value using this object. The value 'false(2)'
will always be returned when querying this object.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.17 |
ntnQosConfigClearStatsAll counters that are associated with QoS policies
are reset to zero by setting the value of this object
to 'true(1)'. The value 'false(2)' will always be
returned when querying this object.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.18 |
ntnQosConfigFcoeRedirOperModeControls the FCoE redirection service for the system.
Enabling the service will initiate validation and
possible reservation of the resources that are required
for service activation. If resources are not available,
the enable request will be rejected.
Note that re-enabling the FCoE redirection service may
result in errors if changes have been made affecting
available resources while FCoE redirection was
temporarily disabled. Mode changes (updates to the
value of this attribute) will take effect immediately.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.19 |
ntnQosConfigFcoeControllerMacAddrThe 802 MAC address of the FCoE Network Controller
(FNC) that is used in conjunction with the FCoE
redirection service. Must be defined prior to
enabling the FCoE redirection service. Changes
made while the FCoE service is enabled will go
into effect the next time the service is enabled.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.20 |
ntnQosConfigFcoeRedirAvailControls access to the FCoE Redirect functionality.
A value of 'accessible(1)' indicates that the FCoE
support can be accessed by an external FCoE Network
Controller (FNC). A value of 'notAccessible(2)' indicates
that FCoE Redirect functionality can not be accessed
by an FNC using SNMP.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.21 |
ntnQosConfigFcoeControllerIfIndexThe interface index of the FCoE Network Controller
(FNC) that is used in conjunction with the FCoE
redirection service. Must be defined prior to
enabling the FCoE redirection service. Changes
made while the FCoE service is enabled will go
into effect the next time the service is enabled.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.22 |
ntnQosConfigFcoeControllerVlanThe VLAN associated with the FCoE Network Controller
(FNC) that is used in conjunction with the FCoE
redirection service. Must be defined prior to
enabling the FCoE redirection service. Changes
made while the FCoE service is enabled will go
into effect the next time the service is enabled.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.11.23 |
ntnQosInterfaceTypeNextFreeThis object contains an unused value for
ntnQosInterfaceTypeId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.12 |
ntnQosApplicationClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.13 |
ntnQosDsAccessElemNextFreeThis object contains an unused value for
ntnQosDsAccessElemId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.1 |
ntnQosDsAccessElemTableA table of IP access elements that a system
may use to identify and manipulate IP traffic. SEQUENCE OF NtnQosDsAccessElemEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2 |
ntnQosDsAccessElemEntryAn IP access element entry describes a single
filter and one or more actions. NtnQosDsAccessElemEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1 |
ntnQosDsAccessElemIdAn index that enumerates the access element
entries. Managers can obtain new values
for row creation in this table by reading
ntnQosDsAccessElemNextFree. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.1 |
ntnQosDsAccessElemAddrTypeThe type of IP address used by this access element
entry. While other types of addresses are
defined in the InetAddressType textual convention,
and DNS names, a classifier can only look at
packets on the wire. Therefore, this object is
limited to IPv4 and IPv6 addresses.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.2 |
ntnQosDsAccessElemDstAddrThe IP address to match against the packet's
destination IP address. This may not be a DNS
name, but may be an IPv4 or IPv6 prefix.
ntnQosDsAccessElemDstPrefixLength indicates the
number of bits that are relevant.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.3 |
ntnQosDsAccessElemDstPrefixLengthThe length of the CIDR Prefix carried in
ntnQosDsAccessElemDstAddr. In IPv4 addresses,
a length of 0 indicates a match of any address;
a length of 32 indicates a match of a single
host address, and a length between 0 and 32
indicates the use of a CIDR Prefix. IPv6 is
similar, except that prefix lengths range
from 0..128.rw InetAddressPrefixLength UNITS "bits" .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.4 |
ntnQosDsAccessElemSrcAddrThe IP address to match against the packet's
source IP address. This may not be a DNS name,
but may be an IPv4 or IPv6 prefix.
ntnQosDsAccessElemSrcPrefixLength indicates
the number of bits that are relevant.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.5 |
ntnQosDsAccessElemSrcPrefixLengthThe length of the CIDR Prefix carried in
ntnQosDsAccessElemSrcAddr. In IPv4 addresses,
a length of 0 indicates a match of any address;
a length of 32 indicates a match of a single host
address, and a length between 0 and 32 indicates
the use of a CIDR Prefix. IPv6 is similar,
except that prefix lengths range from 0..128.rw InetAddressPrefixLength UNITS "bits" .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.6 |
ntnQosDsAccessElemDscpThe value that the DSCP in the packet must
have to match this entry. A value of -1
indicates that a specific DSCP value has not
been defined and thus all DSCP values are
considered a match.rw DscpOrAny (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.7 |
ntnQosDsAccessElemFlowIdThe flow identifier in an IPv6 header.rw FlowIdOrAny .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.8 |
ntnQosDsAccessElemProtocolThe IP protocol to match against the IPv4
protocol number or the IPv6 Next-Header number
in the packet. A value of 255 means match all.
Note the protocol number of 255 is reserved by
IANA, and Next-Header number of 0 is used in
IPv6.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.9 |
ntnQosDsAccessElemDstL4PortMinThe minimum value that the layer-4 destination
port number in the packet must have in order
to match this classifier entry.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.10 |
ntnQosDsAccessElemDstL4PortMaxThe maximum value that the layer-4 destination
port number in the packet must have in order
to match this classifier entry. This value must
be equal to or greater than the value specified
for this entry in ntnQosDsAccessElemDstL4PortMin.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.11 |
ntnQosDsAccessElemSrcL4PortMinThe minimum value that the layer-4 source
port number in the packet must have in order
to match this classifier entry.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.12 |
ntnQosDsAccessElemSrcL4PortMaxThe maximum value that the layer-4 source
port number in the packet must have in order
to match this classifier entry. This value
must be equal to or greater than the value
specified for this entry in
ntnQosDsAccessElemSrcL4PortMin.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.13 |
ntnQosDsAccessElemActionDropThis action attribute is used to specify
whether a packet should dropped or switched
(i.e., not dropped).
The value 'drop(1)', when specified, will
cause the packet being evaluated to be
dropped. A value of 'pass(2)' indicates
that this packet should not be dropped.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.14 |
ntnQosDsAccessElemActionRemarkDscpThis action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram to be updated
with the value of this object.
A value of -1 indicates that the DSCP
field should not be updated.rw Integer32 (-1..63) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.15 |
ntnQosDsAccessElemActionRemarkCosThis action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame to be
updated based on the value of this object.
Specifying a value equal to 'ignore(9)' means
that no action will be taken related to this
attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.16 |
ntnQosDsAccessElemActionSetPrecThis action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used to determine
traffic precedence relative to other
traffic being processed by the device
and other implementation specific
operations at the egress interface.
A low value for the drop precedence equates
to the traffic receiving a higher priority
in terms of processing. In other words,
when congestion is encountered, packets
with a 'highDropPrec(2)' will be dropped
before packets with a 'lowDropPrec(1)'.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.17 |
ntnQosDsAccessElemNameA label used to reference the access element
in a textual manner. All related access elements
(e.g., those that comprise an access-list) must
have the same label.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.18 |
ntnQosDsAccessElemBlockA label used to identify access elements
that are members of the same classification
block. Access elements are members of the
same block if they share the same access element
name (ntnQosDsAccessElemName attribute) and
the same block name.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.19 |
ntnQosDsAccessElemTypeIdentifies the DS access element type. Designates
the higher-level application through which this entry
was created.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.20 |
ntnQosDsAccessElemStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.21 |
ntnQosDsAccessElemStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.22 |
ntnQosDsAccessElemEvalPrecAn evaluation order attribute used to order
elements with the same name and to link elements
across DS and L2 Access Element tables. Only
used with NSNA applications.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.2.1.23 |
ntnQosL2AccessElemNextFreeThis object contains an unused value for
ntnQosL2AccessElemId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.3 |
ntnQosL2AccessElemTableA table of IEEE 802-based access elements
that a system may use to identify and manipulate
Layer 2 traffic. SEQUENCE OF NtnQosL2AccessElemEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4 |
ntnQosL2AccessElemEntryA Layer 2 access element entry describes a single
filter and one or more actions. NtnQosL2AccessElemEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1 |
ntnQosL2AccessElemIdAn index that enumerates the access element
entries. Managers can obtain new values
for row creation in this table by reading
ntnQosL2AccessElemNextFree. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.1 |
ntnQosL2AccessElemDstAddrThe 802 address against which the 802 DA of
incoming traffic streams will be compared.
Frames whose 802 DA matches the physical
address specified by this object, taking
into account address wildcarding as specified
by the ntnQosL2AccessElemDstAddrMask object,
are potentially subject to the processing
guidelines that are associated with this
entry through the related action class.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.2 |
ntnQosL2AccessElemDstAddrMaskThis object specifies the bits in a 802
destination address that should be considered
when performing a 802 DA comparison against
the address specified in the
ntnQosL2AccessElemDstAddr object.
The value of this object represents a mask
that is logically and'ed with the 802 DA in
received frames to derive the value to be
compared against the ntnQosL2AccessElemDstAddr
address. A zero bit in the mask thus means that
the corresponding bit in the address always
matches. The ntnQosL2AccessElemDstAddr value
must also be masked using this value prior to
any comparisons.
The length of this object in octets must equal
the length in octets of the
ntnQosL2AccessElemDstAddr. Note that a mask
with no bits set (i.e., all zeroes) effectively
wildcards the ntnQosL2AccessElemDstAddr object.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.3 |
ntnQosL2AccessElemSrcAddrThe 802 MAC address against which the 802
MAC SA of incoming traffic streams will be
compared. Frames whose 802 MAC SA matches the
physical address specified by this object,
taking into account address wildcarding as
specified by the ntnQosL2AccessElemSrcAddrMask
object, are potentially subject to the
processing guidelines that are associated with
this entry through the related action class.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.4 |
ntnQosL2AccessElemSrcAddrMaskThis object specifies the bits in a 802 MAC
source address that should be considered when
performing a 802 MAC SA comparison against
the address specified in the
ntnQosL2AccessElemSrcAddr object.
The value of this object represents a mask
that is logically and'ed with the 802 MAC SA
in received frames to derive the value to be
compared against the ntnQosL2AccessElemSrcAddr
address. A zero bit in the mask thus means that
the corresponding bit in the address always
matches. The ntnQosL2AccessElemSrcAddr value
must also be masked using this value prior to
any comparisons.
The length of this object in octets must equal
the length in octets of the
ntnQosL2AccessElemSrcAddr. Note that a mask
with no bits set (i.e., all zeroes) effectively
wildcards the ntnQosL2AccessElemSrcAddr object.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.5 |
ntnQosL2AccessElemVlanIdMinThe minimum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnQosL2AccessElemVlanIdMin value must be
less than or equal to the
ntnQosL2AccessElemVlanIdMax value.
Setting the ntnQosL2AccessElemVlanIdMin object
to 1 and the ntnQosL2AccessElemVlanIdMax to
4094 indicates that VLAN data should not be
considered during traffic classification.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.6 |
ntnQosL2AccessElemVlanIdMaxThe maximum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnQosL2AccessElemVlanIdMax value must
be greater than or equal to the
ntnQosL2AccessElemVlanIdMin value.
Setting the ntnQosL2AccessElemVlanIdMin
object to 1 and the ntnQosL2AccessElemVlanIdMax
to 4094 indicates that VLAN data should not
be considered during traffic classification.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.7 |
ntnQosL2AccessElemVlanTagThis object indicates the data link layer
packet format that frames must have to match
this L2 classifier entry.
A value of 'untagged(1)' indicates that only
frames received untagged will match this
classifier component.
A value of 'tagged(2)' means that only frames
received tagged will be considered a match.
A value of 'ignore(3)' means that the presence,
or lack thereof, of a VLAN tag in the received
packet will not be considered when determining
whether a frame matches this classifier entry.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.8 |
ntnQosL2AccessElemEtherTypeThis object specifies the value that will be
compared against the value contained in the
EtherType field of an IEEE 802 frame. Example
settings would include 'IP' (0x0800), 'ARP'
(0x0806) and 'IPX' (0x8137).
Setting the ntnQosL2AccessElemEtherType object
to 0xFFFF indicates that EtherType data should
not be considered during traffic classification.
Note the EtherType value of 0xFFFF is reserved
by IANA.rw Integer32 (0..'ffff'h) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.9 |
ntnQosL2AccessElemUserPriorityThe 802.1p user priority value against which
the value contained in the user priority
field of a tagged 802.1 frame is compared. A
test for equality is performed when
determining if a match exists between the data
in a data link layer frame and the value of
this classifier.
Setting the value of this object to
'matchAllPriorities(9)' causes all user priority
values to match this attribute. This essentially
makes any comparisons with regard to user
priority values unnecessary.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.10 |
ntnQosL2AccessElemActionDropThis action attribute is used to specify
whether a packet should dropped or switched
(i.e., not dropped).
The value 'drop(1)', when specified, will
cause the packet being evaluated to be
dropped. A value of 'pass(2)' indicates
that this packet should not be dropped.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.11 |
ntnQosL2AccessElemActionRemarkDscpThis action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram to be updated
with the value of this object.
A value of -1 indicates that the DSCP
field should not be updated.rw Integer32 (-1..63) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.12 |
ntnQosL2AccessElemActionRemarkCosThis action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame to be
updated based on the value of this object.
Specifying a value equal to 'ignore(9)' means
that no action will be taken related to this
attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.13 |
ntnQosL2AccessElemActionSetPrecThis action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used to determine
traffic precedence relative to other
traffic being processed by the device
and other implementation specific
operations at the egress interface.
A low value for the drop precedence equates
to the traffic receiving a higher priority
in terms of processing. In other words,
when congestion is encountered, packets
with a 'highDropPrec(2)' will be dropped
before packets with a 'lowDropPrec(1)'.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.14 |
ntnQosL2AccessElemNameA label used to reference the access element
in a textual manner. All related access elements
(e.g., those that comprise an access-list) must
have the same label.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.15 |
ntnQosL2AccessElemBlockA label used to identify access elements
that are members of the same classification
block. Access elements are members of the
same block if they share the same access element
name (ntnQosDsAccessElemName attribute) and
the same block name.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.16 |
ntnQosL2AccessElemTypeIdentifies the L2 access element type. Designates
the higher-level application through which this entry
was created.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.17 |
ntnQosL2AccessElemStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.18 |
ntnQosL2AccessElemStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.19 |
ntnQosL2AccessElemEvalPrecAn evaluation order attribute used to order
elements with the same name and to link elements
across DS and L2 Access Element tables. Only
used with NSNA applications.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.4.1.20 |
ntnQosAccessAsgnNextFreeThis object contains an unused value for
ntnQosAccessAsgnId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.5 |
ntnQosAccessAsgnTableA table of access assignments that are currently
in place (i.e., access element/interface
associations). SEQUENCE OF NtnQosAccessAsgnEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6 |
ntnQosAccessAsgnEntryAn access assignment entry describes an
access element/interface association. NtnQosAccessAsgnEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1 |
ntnQosAccessAsgnIdAn index that enumerates the access
assignment entries. Managers can obtain
new values for row creation in this table
by reading ntnQosAccessAsgnNextFree. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.1 |
ntnQosAccessAsgnAclTypeIdentifies the type of access element that is
being referenced.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.2 |
ntnQosAccessAsgnNameA label used to reference an access assignment
in a textual manner. This label, coupled with
the access element type identifier attribute
(ntnQosAccessAsgnAclType), uniquely
identifies an access assignment entry.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.3 |
ntnQosAccessAsgnIfIndexThe interface to which the identified
access element is to be applied, specified
in terms of an ifIndex value. A value of
0 indicates that the entry represents a
template that is used to facilitate entry
creation for a specific interface based
on certain events.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.4 |
ntnQosAccessAsgnRateThe token-bucket rate, in kilobits per
second (kbps). This attribute is used for:
CIR for Simple Token Bucket
CIR in RFC 2697 for srTCM
CIR in RFC 2698 for trTCM
CTR in RFC 2859 for TSWTCM
AverageRate in RFC 3290.
A rate value equal to 0 indicates that
no metering is being requested.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.5 |
ntnQosAccessAsgnBurstSizeThe maximum number of bytes in a single
transmission burst. This attribute is
used for:
Token bucket size for Simple Token Bucket
CBS in RFC 2697 for srTCM
CBS in RFC 2698 for trTCM
Burst Size in RFC 3290.rw BurstSize UNITS "Bytes" .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.6 |
ntnQosAccessAsgnOutActionDropThis action attribute is used to specify
whether a packet deemed out-of-profile
should dropped or switched (i.e., not
dropped).
The value 'drop(1)', when specified, will
cause the packet being evaluated to be
dropped. A value of 'pass(2)' indicates
that this packet should not be dropped.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.7 |
ntnQosAccessAsgnOutActionRemarkDscpThis action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram that is deemed to
be out-of-profile to be updated with the
value of this object.
A value of -1 indicates that the DSCP
field should not be updated.rw Integer32 (-1..63) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.8 |
ntnQosAccessAsgnOutActionRemarkCosThis action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame that is
deemed to be out-of-profile to be updated
based on the value of this object.
Specifying a value equal to 'ignore(9)' means
that no action will be taken related to this
attribute.
Specifying a value equal to 'deriveFromEgressDscp(10)'
means that the value for this attribute will be
assigned based on DSCP-to-user priority map
information maintained in the system. The DSCP
value specified for remarking in the
ntnQosAccessAsgnOutActionRemarkDscp attribute
will be used to determine the user priority.
Specifying a value equal to 'deriveFromIngressTosPrec(11)'
means that the value for this attribute will be
assigned based on the value of the precedence bits
in the IP Type-Of-Service (TOS) field, as defined
in RFC 791. The eight precedence values, also
referred to as Class Selector (CS) values, have a
one-to-one correspondence with the eight 802.1p user
priority values.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.9 |
ntnQosAccessAsgnOutActionSetPrecThis action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used to determine
traffic precedence relative to other
traffic being processed by the device
and other implementation specific
operations at the egress interface.
A low value for the drop precedence equates
to the traffic receiving a higher priority
in terms of processing. In other words,
when congestion is encountered, packets
with a 'highDropPrec(2)' will be dropped
before packets with a 'lowDropPrec(1)'.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.10 |
ntnQosAccessAsgnStatsTypeThe type of statistics tracking used by this
access assignment. The value of this attribute
dictates the amount of statistics tracking resources
(i.e., counters) consumed by this access assignment
entry. A value of 'individualClfr(1)' means that
separate counters will be allocated, space permitting,
for each access element referenced by the assignment.
A value of 'aggregateClfr(2)' means that a single
counter will be used to accumulate the statistics
data for all the classifiers referenced by the
access assignment. A value of 'noStatsTracking(3)'
means that no statistics tracking resources will be
allocated.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.11 |
ntnQosAccessAsgnStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.12 |
ntnQosAccessAsgnStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.13 |
ntnQosAccessAsgnNonMatchActionDropThis action attribute is used to specify
whether a packet deemed out-of-profile
should dropped or switched (i.e., not
dropped).
The value 'drop(1)', when specified, will
cause the packet being evaluated to be
dropped. A value of 'pass(2)' indicates
that this packet should not be dropped.
A value of 'defer(3)' indicates that no
explicit drop/pass action has been specified
(i.e., no-op).rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.14 |
ntnQosAccessAsgnMeterTypeThe metering algorithm associated with
the rate and burst parameters. The number
and type of algorithms supported is
implementation dependent. Potential
algorithms include:
ntnQosTBParamSimpleTokenBucket
ntnQosTBParamSrTCMBlind
ntnQosTBParamSrTCMAware
ntnQosTBParamTrTCMBlind
ntnQosTBParamTrTCMAware
An OBJECT-IDENTITY for each of these
algorithms is defined in this module.
Additional values may be specified as
needed.rw AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.15 |
ntnQosAccessAsgnSecondaryRateThe token-bucket rate, in kilobits per
second (kbps). This attribute is used for:
PIR in RFC 2698 for trTCM
A rate value equal to 0 indicates that
no secondary metering is being requested.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.16 |
ntnQosAccessAsgnSecondaryBurstSizeThe maximum number of bytes in a single
transmission burst. This attribute is
used for:
EBS in RFC 2697 for srTCM
PBS in RFC 2698 for trTCM.rw BurstSize UNITS "Bytes" .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.17 |
ntnQosAccessAsgnYelActionDropThis action attribute is used to specify
whether a packet deemed out-of-profile
should dropped or switched (i.e., not
dropped).
The value 'drop(1)', when specified, will
cause the packet being evaluated to be
dropped. A value of 'pass(2)' indicates
that this packet should not be dropped.
Applies to yellow actions.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.18 |
ntnQosAccessAsgnYelActionRemarkDscpThis action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram that is deemed to
be out-of-profile to be updated with the
value of this object.
A value of -1 indicates that the DSCP
field should not be updated.
Applies to yellow actions.rw Integer32 (-1..63) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.19 |
ntnQosAccessAsgnYelActionRemarkCosThis action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame that is
deemed to be out-of-profile to be updated
based on the value of this object.
Specifying a value equal to 'ignore(9)' means
that no action will be taken related to this
attribute.
Applies to yellow actions.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.20 |
ntnQosAccessAsgnYelActionSetPrecThis action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used to determine
traffic precedence relative to other
traffic being processed by the device
and other implementation specific
operations at the egress interface.
A low value for the drop precedence equates
to the traffic receiving a higher priority
in terms of processing. In other words,
when congestion is encountered, packets
with a 'highDropPrec(2)' will be dropped
before packets with a 'lowDropPrec(1)'.
Applies to yellow actions.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.21 |
ntnQosAccessAsgnSetPrioritySupports filter set prioritization when
multiple filters sets may be associated with
an entity (e.g., user, interface) but only
one can be applied at the given time. The
set with a higher priority value will take
precedence and supercede the set with a
lower priority value. When priority values
are equal, no filter set update will occur.
Consulted only when an entity/filter set
conflict needs resolution.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.22 |
ntnQosAccessAsgnMeteringModeIdentifies the metering mode requested for
the identified filter set.
A value of 'noMetering(1)' indicates that
metering is not requested for the components
of the identified filter set.
A 'perPolicyUniformRateMetering(2)' value
indicates that a unique meter will be associated
with each policy that comprises the identified
filter set. Uniform rate and burst data will be
used for all meters.
A 'perPolicyIndividualRateMetering(3)' value
indicates that a unique meter will be associated
with each policy that comprises the identified
filter set. Unique rate and burst data derived
from the associated classifier data will be
used for each meter.
Setting the attribute to 'perClassifierMetering(4)'
will initiate metering on a per-classifier basis.
Rate and burst data will be derived from the
associated classifier data. The presence of this
data will determine whether or not a meter is
allocated for the classifier.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.6.1.23 |
ntnQosIfAppsTableIdentifies QoS/security application criteria
that is to be applied to a specific interface. SEQUENCE OF NtnQosIfAppsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.7 |
ntnQosIfAppsEntryA conceptual row in the ntnQosIfAppsTable.
Each row identifies an interface value that
corresponds to an entry in the ifTable (MIB-II)
and application criteria with which the interface
is associated. NtnQosIfAppsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.7.1 |
ntnQosIfAppsIfIndexThe ifIndex value that is associated with this
instance of the ntnQosIfAppsEntry. The ifIndex
value of this attribute must correspond to the
ifTable entry with the same ifIndex value. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.7.1.1 |
ntnQosIfAppsAppEnableAn enumeration of interface applications. Indicates
which applications, if any, apply to the associated
interface.rw Bits .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.7.1.2 |
ntnQosIfAppsDefaultGatewayThe IP address of the default gateway to be used
when defining the policy criteria used by the ARP
Spoofing support.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.7.1.3 |
ntnQosIfAppsIfTypeA value describing the overall interface type.
Used when determining whether the DHCP Blocking
support should be applied to the associated
interface.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.7.1.4 |
ntnQosIfAppsDHCPServerThe IP address of the DHCP Server to be used
when defining the policy criteria used by the
DHCP Spoofing support.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.7.1.5 |
ntnQosIfAppsStorageThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosIfAppsStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.7.1.6 |
ntnQosIfAppsStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.7.1.7 |
ntnQosUserPolicyNextFreeThis object contains an unused value for
ntnQosUserPolicyId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.8 |
ntnQosUserPolicyTableUser policy definitions. This class describes the
user policy data that exists on the device. User
policy data associates a user and role with an
interface. SEQUENCE OF NtnQosUserPolicyEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9 |
ntnQosUserPolicyEntryAn instance of this class describes the characteristics
of a user policy data set. User policy data set components
include a role combination, a user and group name and user
session attributes, such as a session identifier and a
session initiation timestamp. NtnQosUserPolicyEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1 |
ntnQosUserPolicyIdAn index that enumerates the user policy
entries. Managers can obtain new values for
row creation in this table by reading
ntnQosUserPolicyNextFree. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.1 |
ntnQosUserPolicyIfIndexThe ifIndex value that is associated with this
instance of the ntnQosUserPolicyEntry. The ifIndex
value of this attribute must correspond to an
ifTable entry with the same ifIndex value.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.2 |
ntnQosUserPolicyRoleCombinationThe role combination that is associated with the
interface with an ifIndex value that is equal to
ntnQosUserPolicyIfIndex and the user identified by
the ntnQosUserPolicyUserName attribute.
A user role combination is used to logically identify
a physical interface to which policy rules and actions
can be applied. The role combination string must be
unique from any other role combinations defined in
system.rw RoleCombination (POLICY-FRAMEWORK-PIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.3 |
ntnQosUserPolicyUserNameThe user name identifying the user that is currently
associated with this user policy (i.e., ifIndex and
role combination) information.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.4 |
ntnQosUserPolicyUserGroupThe user group with which the user, identified by
the ntnQosUserPolicyUserName attribute, is associated.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.5 |
ntnQosUserPolicySessionIdThe system-assigned session identifier used to
track instances of this user policy entry (i.e., the
user policy entry for a specific interface and user).ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.6 |
ntnQosUserPolicySessionStartThe system-assigned session start timestamp. The
value of this attribute corresponds to the value of
the sysUpTime attribute, coverted to seconds, at the
instant that this user policy entry is created and/or
updated.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.7 |
ntnQosUserPolicySessionGroupThe system-assigned session group identifier. Multiple
user sessions belong to the same group if they share
the same role combination and have the same value for
this attribute. This session group value is associated
with installed policy criteria to unambiguously identify
the users and interfaces to which QoS policy is being
applied.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.8 |
ntnQosUserPolicyStorageThe storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosUserPolicyStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.9 |
ntnQosUserPolicyStatusThe status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.10 |
ntnQosUserPolicySrcMacAddrThe 802 source MAC address associated with
the identified user. If specified, this address
will automatically be used in associated user
policy criteria to uniquely identify user traffic
on an interface on which potentially other users'
traffic will be present.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.11 |
ntnQosUserPolicySrcMacAddrMaskThis object specifies the bits in an 802 source
MAC address that should be considered when
performing a 802 MAC SA comparison against the
address specified in the ntnQosUserPolicySrcMacAddr
object.
The value of this object represents a mask
that is logically and'ed with the 802 MAC SA
in received frames to derive the value to be
compared against the ntnQosUserPolicySrcMacAddr
address. A zero bit in the mask thus means that
the corresponding bit in the address always
matches. The ntnQosUserPolicySrcMacAddr value
must also be masked using this value prior to
any comparisons.
The length of this object in bytes must equal the
length in bytes of the ntnQosUserPolicySrcMacAddr.
Note that a mask with no bits set (i.e., all zeroes)
effectively wildcards the ntnQosUserPolicySrcMacAddr
object.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.9.1.12 |
ntnQosDsL2AccessElemNextFreeThis object contains an unused value for
ntnQosDsL2AccessElemId, or a zero to indicate
that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.10 |
ntnQosDsL2AccessElemTableA table of IP/L2 access elements that a system
may use to identify and manipulate IP/L2 traffic. SEQUENCE OF NtnQosDsL2AccessElemEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11 |
ntnQosDsL2AccessElemEntryAn IP/L2 access element entry describes a single
filter and one or more actions. NtnQosDsL2AccessElemEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1 |
ntnQosDsL2AccessElemIdAn index that enumerates the access element
entries. Managers can obtain new values
for row creation in this table by reading
ntnQosDsL2AccessElemNextFree.
Version 1/2 attribute. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.1 |
ntnQosDsL2AccessElemAddrTypeThe type of IP address used by this access element
entry. While other types of addresses are
defined in the InetAddressType textual convention,
and DNS names, a classifier can only look at
packets on the wire. Therefore, this object is
limited to IPv4 and IPv6 addresses.
Version 1/2 attribute.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.2 |
ntnQosDsL2AccessElemDstIpAddrThe IP address to match against the packet's
destination IP address. This may not be a DNS
name, but may be an IPv4 or IPv6 prefix.
ntnQosDsL2AccessElemDstIpPrefixLength indicates the
number of bits that are relevant.
Version 1/2 attribute.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.3 |
ntnQosDsL2AccessElemDstIpPrefixLengthThe length of the CIDR Prefix carried in
ntnQosDsL2AccessElemDstIpAddr. In IPv4 addresses,
a length of 0 indicates a match of any address;
a length of 32 indicates a match of a single
host address, and a length between 0 and 32
indicates the use of a CIDR Prefix. IPv6 is
similar, except that prefix lengths range
from 0..128.
Version 1/2 attribute.rw InetAddressPrefixLength UNITS "bits" .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.4 |
ntnQosDsL2AccessElemSrcIpAddrThe IP address to match against the packet's
source IP address. This may not be a DNS name,
but may be an IPv4 or IPv6 prefix.
ntnQosDsL2AccessElemSrcIpPrefixLength indicates
the number of bits that are relevant.
Version 1/2 attribute.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.5 |
ntnQosDsL2AccessElemSrcIpPrefixLengthThe length of the CIDR Prefix carried in
ntnQosDsL2AccessElemSrcIpAddr. In IPv4 addresses,
a length of 0 indicates a match of any address;
a length of 32 indicates a match of a single host
address, and a length between 0 and 32 indicates
the use of a CIDR Prefix. IPv6 is similar,
except that prefix lengths range from 0..128.
Version 1/2 attribute.rw InetAddressPrefixLength UNITS "bits" .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.6 |
ntnQosDsL2AccessElemDscpThe value that the DSCP in the packet must
have to match this entry. A value of -1
indicates that a specific DSCP value has not
been defined and thus all DSCP values are
considered a match.
Version 1/2 attribute.rw DscpOrAny (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.7 |
ntnQosDsL2AccessElemFlowIdThe flow identifier in an IPv6 header.
Version 1/2 attribute.rw FlowIdOrAny .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.8 |
ntnQosDsL2AccessElemProtocolThe IP protocol to match against the IPv4
protocol number or the IPv6 Next-Header number
in the packet. A value of 255 means match all.
Note the protocol number of 255 is reserved by
IANA, and Next-Header number of 0 is used in
IPv6.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.9 |
ntnQosDsL2AccessElemDstL4PortMinThe minimum value that the layer-4 destination
port number in the packet must have in order
to match this classifier entry.
Version 1/2 attribute.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.10 |
ntnQosDsL2AccessElemDstL4PortMaxThe maximum value that the layer-4 destination
port number in the packet must have in order
to match this classifier entry. This value must
be equal to or greater than the value specified
for this entry in ntnQosDsL2AccessElemDstL4PortMin.
Version 1/2 attribute.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.11 |
ntnQosDsL2AccessElemSrcL4PortMinThe minimum value that the layer-4 source
port number in the packet must have in order
to match this classifier entry.
Version 1/2 attribute.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.12 |
ntnQosDsL2AccessElemSrcL4PortMaxThe maximum value that the layer-4 source
port number in the packet must have in order
to match this classifier entry. This value
must be equal to or greater than the value
specified for this entry in
ntnQosDsL2AccessElemSrcL4PortMin.
Version 1/2 attribute.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.13 |
ntnQosDsL2AccessElemDstMacAddrThe 802 address against which the 802 DA of
incoming traffic streams will be compared.
Frames whose 802 DA matches the physical
address specified by this object, taking
into account address wildcarding as specified
by the ntnQosDsL2AccessElemDstMacAddrMask object,
are potentially subject to the processing
guidelines that are associated with this
entry through the related action class.
Version 1/2 attribute.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.14 |
ntnQosDsL2AccessElemDstMacAddrMaskThis object specifies the bits in a 802
destination address that should be considered
when performing a 802 DA comparison against
the address specified in the
ntnQosDsL2AccessElemDstMacAddr object.
The value of this object represents a mask
that is logically and'ed with the 802 DA in
received frames to derive the value to be
compared against the ntnQosDsL2AccessElemDstMacAddr
address. A zero bit in the mask thus means that
the corresponding bit in the address always
matches. The ntnQosDsL2AccessElemDstMacAddr value
must also be masked using this value prior to
any comparisons.
The length of this object in octets must equal
the length in octets of the
ntnQosDsL2AccessElemDstMacAddr. Note that a mask
with no bits set (i.e., all zeroes) effectively
wildcards the ntnQosDsL2AccessElemDstMacAddr object.
Version 1/2 attribute.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.15 |
ntnQosDsL2AccessElemSrcMacAddrThe 802 MAC address against which the 802
MAC SA of incoming traffic streams will be
compared. Frames whose 802 MAC SA matches the
physical address specified by this object,
taking into account address wildcarding as
specified by the ntnQosDsL2AccessElemSrcMacAddrMask
object, are potentially subject to the
processing guidelines that are associated with
this entry through the related action class.
Version 1/2 attribute.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.16 |
ntnQosDsL2AccessElemSrcMacAddrMaskThis object specifies the bits in a 802 MAC
source address that should be considered when
performing a 802 MAC SA comparison against
the address specified in the
ntnQosDsL2AccessElemSrcMacAddr object.
The value of this object represents a mask
that is logically and'ed with the 802 MAC SA
in received frames to derive the value to be
compared against the ntnQosDsL2AccessElemSrcMacAddr
address. A zero bit in the mask thus means that
the corresponding bit in the address always
matches. The ntnQosDsL2AccessElemSrcMacAddr value
must also be masked using this value prior to
any comparisons.
The length of this object in octets must equal
the length in octets of the
ntnQosDsL2AccessElemSrcMacAddr. Note that a mask
with no bits set (i.e., all zeroes) effectively
wildcards the ntnQosDsL2AccessElemSrcMacAddr object.
Version 1/2 attribute.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.17 |
ntnQosDsL2AccessElemVlanIdMinThe minimum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnQosDsL2AccessElemVlanIdMin value must be
less than or equal to the
ntnQosDsL2AccessElemVlanIdMax value.
Setting the ntnQosDsL2AccessElemVlanIdMin object
to 1 and the ntnQosDsL2AccessElemVlanIdMax to
4094 indicates that VLAN data should not be
considered during traffic classification.
If a frame is double tagged, this value
represents the outer VLAN ID (Ovid).
Version 1/2 attribute.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.18 |
ntnQosDsL2AccessElemVlanIdMaxThe maximum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnQosDsL2AccessElemVlanIdMax value must
be greater than or equal to the
ntnQosDsL2AccessElemVlanIdMin value.
Setting the ntnQosDsL2AccessElemVlanIdMin
object to 1 and the ntnQosDsL2AccessElemVlanIdMax
to 4094 indicates that VLAN data should not
be considered during traffic classification.
If a frame is double tagged, this value
represents the outer VLAN ID (Ovid).
Version 1/2 attribute.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.19 |
ntnQosDsL2AccessElemVlanTagThis object indicates the data link layer
packet format that frames must have to match
this L2 classifier entry.
A value of 'untagged(1)' indicates that only
frames received untagged will match this
classifier component.
A value of 'tagged(2)' means that only frames
received tagged (both single tagged and double
tagged) will be considered a match.
A value of 'ignore(3)' means that the presence,
or lack thereof, of a VLAN tag in the received
packet will not be considered when determining
whether a frame matches this classifier entry.
A value of 'doubleTagged(4)' means that only
frames received with an inner and outer tag
(i.e., a double tagged frame) will be considered
a match.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.20 |
ntnQosDsL2AccessElemEtherTypeThis object specifies the value that will be
compared against the value contained in the
EtherType field of an IEEE 802 frame. Example
settings would include 'IP' (0x0800), 'ARP'
(0x0806) and 'IPX' (0x8137).
Setting the ntnQosDsL2AccessElemEtherType object
to 0xFFFF indicates that EtherType data should
not be considered during traffic classification.
Note the EtherType value of 0xFFFF is reserved
by IANA.
Version 1/2 attribute.rw Integer32 (0..'ffff'h) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.21 |
ntnQosDsL2AccessElemUserPriorityThe 802.1p user priority value against which
the value contained in the user priority
field of a tagged 802.1 frame is compared. A
test for equality is performed when
determining if a match exists between the data
in a data link layer frame and the value of
this classifier.
Setting the value of this object to
'matchAllPriorities(9)' causes all user priority
values to match this attribute. This essentially
makes any comparisons with regard to user
priority values unnecessary.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.22 |
ntnQosDsL2AccessElemActionDropThis action attribute is used to specify
whether a packet should dropped or switched
(i.e., not dropped).
The value 'drop(1)', when specified, will
cause the packet being evaluated to be
dropped. A value of 'pass(2)' indicates
that this packet should not be dropped.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.23 |
ntnQosDsL2AccessElemActionRemarkDscpThis action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram to be updated
with the value of this object.
A value of -1 indicates that the DSCP
field should not be updated.
Version 1/2 attribute.rw Integer32 (-1..63) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.24 |
ntnQosDsL2AccessElemActionRemarkCosThis action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame to be
updated based on the value of this object.
Specifying a value equal to 'ignore(9)' means
that no action will be taken related to this
attribute.
Specifying a value equal to 'deriveFromEgressDscp(10)'
means that the value for this attribute will be
assigned based on DSCP-to-user priority map
information maintained in the system. The DSCP
value specified for remarking in the
ntnQosDsL2AccessElemActionRemarkDscp attribute
will be used to determine the user priority.
Specifying a value equal to 'deriveFromIngressTosPrec(11)'
means that the value for this attribute will be
assigned based on the value of the precedence bits
in the IP Type-Of-Service (TOS) field, as defined
in RFC 791. The eight precedence values, also
referred to as Class Selector (CS) values, have a
one-to-one correspondence with the eight 802.1p user
priority values.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.25 |
ntnQosDsL2AccessElemActionSetPrecThis action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used to determine
traffic precedence relative to other
traffic being processed by the device
and other implementation specific
operations at the egress interface.
A low value for the drop precedence equates
to the traffic receiving a higher priority
in terms of processing. In other words,
when congestion is encountered, packets
with a 'highDropPrec(2)' will be dropped
before packets with a 'lowDropPrec(1)'.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.26 |
ntnQosDsL2AccessElemNameA label used to reference the access element
in a textual manner. All related access elements
(e.g., those that comprise an access-list) must
have the same label.
Version 1/2 attribute.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.27 |
ntnQosDsL2AccessElemBlockA label used to identify access elements
that are members of the same classification
block. Access elements are members of the
same block if they share the same access element
name (ntnQosDsL2AccessElemName attribute) and
the same block name.
Version 1/2 attribute.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.28 |
ntnQosDsL2AccessElemTypeIdentifies the DS/L2 access element type. Designates
the higher-level application through which this entry
was created.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.29 |
ntnQosDsL2AccessElemStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.
Version 1/2 attribute.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.30 |
ntnQosDsL2AccessElemStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/2 attribute.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.31 |
ntnQosDsL2AccessElemEvalPrecAn evaluation order attribute used to order
elements with the same name and to link elements
across DS and L2 Access Element tables. Only
used with NSNA applications.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.32 |
ntnQosDsL2AccessElemIpFlagsRepresents the flags present in an IPv4 header.
If a bit that is associated with a specific IP flag
is set in this attribute, IPv4 packets with the
specified flag set in the header will match this
classifier.
Version 2 attribute.rw Bits .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.33 |
ntnQosDsL2AccessElemTcpCtrlFlagsRepresents the control flags (code bits) present in
an TCP header. If a bit that is associated with a
specific TCP control flag is set in this attribute,
TCP packets with the specified flag set in the header
will match this classifier.
Version 2 attribute.rw Bits .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.34 |
ntnQosDsL2AccessElemIpv4OptionsThis object indicates whether the presence,
or lack thereof, of IPv4 options in an IPv4
packet should should be considered when looking
for a match for this classifier entry.
A value of 'ipv4OptionsPresent(1)' indicates
that only IPv4 packets with options will match
this classifier element.
A value of 'ipv4OptionsNotPresent(2)' means that
only IPv4 packets without options will be
considered a match.
A value of 'ignore(3)' means that the presence,
or lack thereof, of IPv4 options in the received
packet will not be considered when determining
whether a packet matches this classifier entry.
Version 2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.35 |
ntnQosDsL2AccessElemPktTypeThis object indicates the data link layer
frame format that frames must have to match
this L2 classifier entry.
A value of 'ethernetII(1)' indicates that only
Ethernet II format frames will match this
classifier component.
A value of 'snap(2)' indicates that only
IEEE 802 SNAP format frames will match this
classifier component.
A value of 'llc(3)' indicates that only
IEEE 802 LLC format frames will match this
classifier component.
A value of 'ignore(4)' means that the frame,
format will not be considered when determining
whether a frame matches this classifier entry.
Version 2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.36 |
ntnQosDsL2AccessElemIvidMinThe minimum value that the Inner VLAN ID (Ivid)
in a double tagged packet must have in order to
match this classifier entry.
The ntnL2MultiFieldClfrIvidMin value must be
less than or equal to the
ntnL2MultiFieldClfrIvidMax value.
Setting the ntnL2MultiFieldClfrIvidMin object
to 1 and the ntnL2MultiFieldClfrIvidMax to
4094 indicates that inner VLAN tag data should
not be considered during traffic classification.
A non-default value for this attribute may only
be specified if the ntnL2MultiFieldClfrVlanTag
attribute has a value of 'doubleTagged(4)'.
Version 2 attribute.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.37 |
ntnQosDsL2AccessElemIvidMaxThe maximum value that the Inner VLAN ID (Ivid)
in a double tagged packet must have in order to
match this classifier entry.
The ntnL2MultiFieldClfrIvidMax value must
be greater than or equal to the
ntnL2MultiFieldClfrIvidMin value.
Setting the ntnL2MultiFieldClfrIvidMin
object to 1 and the ntnL2MultiFieldClfrIvidMax
to 4094 indicates that VLAN data should not
be considered during traffic classification.
A non-default value for this attribute may only
be specified if the ntnL2MultiFieldClfrVlanTag
attribute has a value of 'doubleTagged(4)'.
Version 2 attribute.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.38 |
ntnQosDsL2AccessElemUnknownUcastFramesIf 'true(1)', frames containing an unknown
unicast destination address will match this
classification entry. A value of 'false(2)'
indicates that no classification is requested
based on this address type.
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.39 |
ntnQosDsL2AccessElemUnknownMcastFramesIf 'true(1)', frames containing an unknown
multicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested based on this address type.
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.40 |
ntnQosDsL2AccessElemKnownUcastFramesIf 'true(1)', frames containing a known
unicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested based on this address type.
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.41 |
ntnQosDsL2AccessElemKnownMcastFramesIf 'true(1)', frames containing a known
multicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested based on this address type.
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.42 |
ntnQosDsL2AccessElemBcastFramesIf 'true(1)', frames containing a broadcast
destination address will match this
classification entry. A value of 'false(2)'
indicates that no classification is
requested based on this address type.
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.43 |
ntnQosDsL2AccessElemUnknownIpMcastIf 'true(1)', IP packets containing an unknown
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
address type.
Version 2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.44 |
ntnQosDsL2AccessElemKnownIpMcastIf 'true(1)', IP packets containing a known
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
address type.
Version 2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.45 |
ntnQosDsL2AccessElemNonIpPktIf 'true(1)', non IP packets will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
packet type.
Version 2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.46 |
ntnQosDsL2AccessElemVersionVersion indicator for ntnQosDsL2AccessElemTable.rw VersionIndicator .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.47 |
ntnQosDsL2AccessElemUnknownNonIpMcastIf 'true(1)', non-IP packets containing an unknown
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
address type.
Version 2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.48 |
ntnQosDsL2AccessElemKnownNonIpMcastIf 'true(1)', non-IP packets containing a known
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
address type.
Version 2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.49 |
ntnQosDsL2AccessElemMasterBlockMemberIf 'true(1)', attribute values in this DsL2Access
element will take precedence over values in other
entries when multiple elements are members of the
same block and a single value must be chosen to
represent all of the block members.
For example, a metered policy with a block of filters
requires a single in-profile-action be specified.
This attribute is used to identify the master block
member from the block member list from which the
in-profile-action will be derived.
A value of 'false(2)' indicates that, if this element
is the member of a block, attribute values in this
element will not explicitly take precedence over
values in other block member elements.
Multiple block members may have the value of this
attribute set to 'true(1)'. If multiple block member
masters are defined or if all block members have the
value of this attribute set to 'false(2)', value
precedence is determined using element evaluation
precedence (i.e., the block member with the lowest
evaluation precedence acts as the master when
necessary).
Version 1/2 attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.50 |
ntnQosDsL2AccessElemMeterTypeThe metering algorithm associated with
the rate and burst parameters.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.51 |
ntnQosDsL2AccessElemRateThe token-bucket rate, in kilobits per
second (kbps). This attribute is used for:
CIR for Simple Token Bucket
CIR in RFC 2697 for srTCM
CIR in RFC 2698 for trTCM
CTR in RFC 2859 for TSWTCM
AverageRate in RFC 3290.
A rate value equal to 0 indicates that
no metering is being requested.
Version 1/2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.52 |
ntnQosDsL2AccessElemBurstSizeThe maximum number of bytes in a single
transmission burst. This attribute is
used for:
Token bucket size for Simple Token Bucket
CBS in RFC 2697 for srTCM
CBS in RFC 2698 for trTCM
Burst Size in RFC 3290.
Version 1/2 attribute.rw BurstSize UNITS "Bytes" .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.53 |
ntnQosDsL2AccessElemOutActionDropThis action attribute is used to specify
whether a packet deemed out-of-profile
should dropped or switched (i.e., not
dropped).
The value 'drop(1)', when specified, will
cause the packet being evaluated to be
dropped. A value of 'pass(2)' indicates
that this packet should not be dropped.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.54 |
ntnQosDsL2AccessElemOutActionRemarkDscpThis action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram that is deemed to
be out-of-profile to be updated with the
value of this object.
A value of -1 indicates that the DSCP
field should not be updated.
Version 1/2 attribute.rw Integer32 (-1..63) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.55 |
ntnQosDsL2AccessElemOutActionRemarkCosThis action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame that is
deemed to be out-of-profile to be updated
based on the value of this object.
Specifying a value equal to 'ignore(9)' means
that no action will be taken related to this
attribute.
Specifying a value equal to 'deriveFromEgressDscp(10)'
means that the value for this attribute will be
assigned based on DSCP-to-user priority map
information maintained in the system. The DSCP
value specified for remarking in the
ntnQosDsL2AccessElemOutActionRemarkDscp attribute
will be used to determine the user priority.
Specifying a value equal to 'deriveFromIngressTosPrec(11)'
means that the value for this attribute will be
assigned based on the value of the precedence bits
in the IP Type-Of-Service (TOS) field, as defined
in RFC 791. The eight precedence values, also
referred to as Class Selector (CS) values, have a
one-to-one correspondence with the eight 802.1p user
priority values.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.56 |
ntnQosDsL2AccessElemOutActionSetPrecThis action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used to determine
traffic precedence relative to other
traffic being processed by the device
and other implementation specific
operations at the egress interface.
A low value for the drop precedence equates
to the traffic receiving a higher priority
in terms of processing. In other words,
when congestion is encountered, packets
with a 'highDropPrec(2)' will be dropped
before packets with a 'lowDropPrec(1)'.
Version 1/2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.57 |
ntnQosDsL2AccessElemSecondaryRateThe token-bucket rate, in kilobits per
second (kbps). This attribute is used for:
PIR in RFC 2698 for trTCM
A rate value equal to 0 indicates that
no secondary metering is being requested.
Version 2 attribute.rw Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.58 |
ntnQosDsL2AccessElemSecondaryBurstSizeThe maximum number of bytes in a single
transmission burst. This attribute is
used for:
EBS in RFC 2697 for srTCM
PBS in RFC 2698 for trTCM.
Version 2 attribute.rw BurstSize UNITS "Bytes" .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.59 |
ntnQosDsL2AccessElemYelActionDropThis action attribute is used to specify
whether a packet deemed out-of-profile
should dropped or switched (i.e., not
dropped).
The value 'drop(1)', when specified, will
cause the packet being evaluated to be
dropped. A value of 'pass(2)' indicates
that this packet should not be dropped.
Applies to yellow actions.
Version 2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.60 |
ntnQosDsL2AccessElemYelActionRemarkDscpThis action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram that is deemed to
be out-of-profile to be updated with the
value of this object.
A value of -1 indicates that the DSCP
field should not be updated.
Applies to yellow actions.
Version 2 attribute.rw Integer32 (-1..63) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.61 |
ntnQosDsL2AccessElemYelActionRemarkCosThis action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame that is
deemed to be out-of-profile to be updated
based on the value of this object.
Specifying a value equal to 'ignore(9)' means
that no action will be taken related to this
attribute.
Specifying a value equal to 'deriveFromEgressDscp(10)'
means that the value for this attribute will be
assigned based on DSCP-to-user priority map
information maintained in the system. The DSCP
value specified for remarking in the
ntnQosDsL2AccessElemYelActionRemarkDscp attribute
will be used to determine the user priority.
Specifying a value equal to 'deriveFromIngressTosPrec(11)'
means that the value for this attribute will be
assigned based on the value of the precedence bits
in the IP Type-Of-Service (TOS) field, as defined
in RFC 791. The eight precedence values, also
referred to as Class Selector (CS) values, have a
one-to-one correspondence with the eight 802.1p user
priority values.
Applies to yellow actions.
Version 2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.62 |
ntnQosDsL2AccessElemYelActionSetPrecThis action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used to determine
traffic precedence relative to other
traffic being processed by the device
and other implementation specific
operations at the egress interface.
A low value for the drop precedence equates
to the traffic receiving a higher priority
in terms of processing. In other words,
when congestion is encountered, packets
with a 'highDropPrec(2)' will be dropped
before packets with a 'lowDropPrec(1)'.
Applies to yellow actions.
Version 2 attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.11.1.63 |
ntnQosFilterSetStatsTableThis table contains counters for all the
traffic passing through a processing element
at the filter set/classifier level. SEQUENCE OF NtnQosFilterSetStatsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12 |
ntnQosFilterSetStatsEntryAn entry in the filter set statistics table
describes a single set of traffic counters
for a specific filter set/precedence/evaluation
order combination. NtnQosFilterSetStatsEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1 |
ntnQosFilterSetStatsAccessAsgnIdAn index component that identifies the
Access Assignment element associated with
this Filter Set Statistics entry. This
attribute has the same value as the
ntnQosAccessAsgnId attribute with which it
is associated. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1.1 |
ntnQosFilterSetStatsPrecedenceAn index component that identifies the precedence
level associated with the filter set element for
which statistics data is being returned. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1.2 |
ntnQosFilterSetStatsEvalOrderAn index component that identifies the evaluation
order associated with the filter set element for
which statistics data is being returned. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1.3 |
ntnQosFilterSetStatsInProfileOctetsThe number of octets considered to be in-profile
that have been processed by the associated data
path classifier.ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1.4 |
ntnQosFilterSetStatsInProfilePktsThe number of packets considered to be in-profile
that have been processed by the associated data
path classifier.ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1.5 |
ntnQosFilterSetStatsOutOfProfileOctetsThe number of octets considered to be out-of-profile
that have been processed by the associated data
path classifier.ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1.6 |
ntnQosFilterSetStatsOutOfProfilePktsThe number of packets considered to be out-of-profile
that have been processed by the associated data
path classifier.ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1.7 |
ntnQosFilterSetStatsAccessElemIdIdentifies the individual Access Element that is
a component of the referenced filter set and to
which the statistics data associated with this
filter set/precedence/eval-order tuple applies.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1.8 |
ntnQosFilterSetStatsStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1.9 |
ntnQosFilterSetStatsStatusThe status of this row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.12.1.10 |
avFcoeRedirNextFreeThis object contains an unused value for avFcoeRedirId,
or a zero to indicate that none exist.ro IndexIntegerNextFree (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.13 |
avFcoeRedirTableA table of FCoE streams that are being redirected
through an external FCoE Network Controller (FNC). SEQUENCE OF AvFcoeRedirEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14 |
avFcoeRedirEntryAn FCoE redirection entry contains the data necessary
to redirect a specific FCoE stream through an external
network controller. AvFcoeRedirEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1 |
avFcoeRedirIdAn index that enumerates the FCoE redirect
entries. Managers can obtain new values
for row creation in this table by reading
avFcoeRedirNextFree. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.1 |
avFcoeRedirDstIdThis object specifies the Fibre Channel (FC)
destination ID (D_ID) that should be used
when performing stream identification.rw FcId .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.2 |
avFcoeRedirIngressInterfaceListThis object identifies ingress interfaces,
using an interface's ifIndex representation,
to which the filter and action criteria
specified in this entry should be applied.rw InterfaceList .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.3 |
avFcoeRedirVlanIdMinThe minimum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this entry.
The avFcoeRedirVlanIdMin value must be less
than or equal to the avFcoeRedirVlanIdMax value.
Setting the avFcoeRedirVlanIdMin object
to 1 and the avFcoeRedirVlanIdMax to
4094 indicates that VLAN data should not be
considered during traffic identification.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.4 |
avFcoeRedirVlanIdMaxThe maximum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this entry.
The avFcoeRedirVlanIdMax value must be greater
than or equal to the avFcoeRedirVlanIdMin value.
Setting the avFcoeRedirVlanIdMin object to 1
and the avFcoeRedirVlanIdMax to 4094 indicates
that VLAN data should not be considered during
traffic identification.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.5 |
avFcoeRedirUserPriorityThe 802.1p user priority value against which
the value contained in the user priority
field of a tagged 802.1 frame is compared. A
test for equality is performed when determining
if a match exists between the data in a data link
layer frame and the value of this entry.
A value of 'matchAllPriorities(9)' causes all
user priority values to match this attribute.
This essentially makes any comparisons with
regard to user priority values unnecessary.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.6 |
avFcoeRedirEtherTypeThis object specifies the value that will be
compared against the value contained in the
EtherType field of an IEEE 802 frame. Example
settings would include 'IP' (0x0800), 'FCoE'
(0x8906) and 'FIP' (0x8914).
Setting the avFcoeRedirEtherType object to 0xFFFF
indicates that EtherType data should not be
considered during traffic classification. Note
the EtherType value of 0xFFFF is reserved by IANA.rw Integer32 (0..'ffff'h) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.7 |
avFcoeRedirSrcIdThis object specifies the Fibre Channel (FC)
source ID (D_ID) that should be used when
performing stream identification. Setting this
attribute to it's default value indicates that
S_ID data should not be used for traffic
identification.rw FcId .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.8 |
avFcoeRedirActionUpdateDstMacThe 802 MAC address that will be used to update the
destination MAC address in frames that are identified
based on filter data specified in this entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.9 |
avFcoeRedirActionUpdateSrcMacThe 802 MAC address that will be used to update the
source MAC address in frames that are identified
based on filter data specified in this entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.10 |
avFcoeRedirActionEgressInterfaceThe interface through which frames identified based
on filter data specified in this entry will egress
the device. An egress interface or an egress trunk
must be specified. A value of 0 indicates that an
egress interface has not been specified.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.11 |
avFcoeRedirNameA label used to reference the FCoE redirect entry
in a textual manner.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.12 |
avFcoeRedirStorageThe storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
This object may not be modified if the
associated status object is equal to 'active'.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.13 |
avFcoeRedirStatusThe status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.14 |
avFcoeRedirProcessedFramesCounts the frames that have matched the criteria
specified in this entry.ro Counter64 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.15 |
avFcoeRedirActionEgressTrunkIdThe trunk through which frames identified based
on filter data specified in this entry will egress
the device. An egress interface or an egress trunk
must be specified. A value of 0 indicates that an
egress trunk has not been specified.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.13.14.1.16 |
ntnQosDEITableTable to configure DEI support.
DEI provides the user the option to set the packet
color based on the CFI (used as DEI) bit in the
packet 802.1Q tag. Also the user has the option to
mark the packet color into the CFI bit in the 802.1Q
tag. SEQUENCE OF NtnQosDEIEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.14 |
ntnQosDEIEntryAn instance of the ntnQoSDEI class that identifies
an interface options for DEI. NtnQosDEIEntry .1.3.6.1.4.1.1754.1.1.7.11.7.1.14.1 |
ntnQosDEIInterfaceIdAn index that identifies the interface index
associated with this table entry. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.14.1.1 |
ntnQosDEIIngressColorFromDEIThis option allows the user to enable ingress coloring
if the packets based on DEI in the 802.1Q packet tag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.14.1.2 |
ntnQosDEIEgressMarkDEIThis option allows the user to mark at egress the DEI
bit in the 802.1Q tag if the packet is colored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.14.1.3 |
ntnQosQuickPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.15 |
ntnQosQuickPolicyControlThis object is used to create and delete quick policies. Setting
the value to create(2) will create a quick policy based on the
current values of the other object in the ntnQosQuickPolicy group.
Setting the value to delete(3) will delete the quick policy
identified by the current value of ntnQosQuickPolicyId. On
retrieval, the value is always none(1).rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.1 |
ntnQosQuickPolicyPortListThis object indicates the list of ports to which the quick policy
will be applied.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.2 |
ntnQosQuickPolicyActionThis object indicates the main action of the quick-policy.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.3 |
ntnQosQuickPolicyIdThis object indicates the ID of a policy to be deleted.rw IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.4 |
ntnQosQuickPolicyPbitsValueThe pbits value for creating a quick policy.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.5 |
ntnQosQuickPolicyRateThe rate value of the simple meter associated with a quick policy.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.6 |
ntnQosQuickPolicyTrTCMTypeThe type of a trtc quick policy. This object is ignored if the
value of ntnQosQuickPolicyAction is not trtcm(4).rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.7 |
ntnQosQuickPolicyCIRRateThe CIR rate for creating a trtcm quick policy.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.8 |
ntnQosQuickPolicyPIRRateThe PIR rate for creating a trtcm quick policy.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.9 |
ntnQosQuickPolicyTrackQiQTypeThe QinQ type for a quick policy.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.10 |
ntnQosQuickPolicyDscpThe DSCP codepoint for a quick policy.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.11 |
ntnQosQuickPolicyPriorityThe priority value for a quick policy.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.12 |
ntnQosQuickPolicyVidThe VLAN ID for a quick policy.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.13 |
ntnQosQuickPolicyTPIDThe TPID value for a quick policy.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.14 |
ntnQosQuickPolicyIVidThe IVID value or a quick policy.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.15 |
ntnQosQuickPolicyITPIDThe ITPID value for a quick policy.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.16 |
ntnQosQuickPolicyIPriorityThe I-priority value for a quick policy.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.17 |
ntnQosQuickPolicyPrecedenceThe precedence value for a quick policy.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.18 |
ntnQosQuickPolicyTrackStatisticsIndicates whether statistics should be tracked for this quick policy.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.15.19 |
ntnQosFilterLimiting OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.1.16 |
ntnQosFilterLimitingAdminEnabledThis object indicates whether QoS filter limiting is administratively
enabled. Note that changes to this object are not applied to the
operational state until the system is rebooted, so this value may
differ from that of ntnQosFilterLimitingOperEnabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.16.1 |
ntnQosFilterLimitingOperEnabledThis object indicates whether QoS filter limiting is currently
enabled. Note that this object will only change values (in response
to changes to the value of ntnQosFilterLimitingOperEnabled) when the
system is rebooted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.7.1.16.2 |
ntnQosPolicyEvolPibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.2 |
ntnQosPolicyEvolPibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.2.1 |
ntnQosPolicyEvolPibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.2.2 |
ntnQosPolicyEvolPibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.7.3 |
ntnQosPolicyEvolLocalUbpSessionFailureSignifies that filter data associated with a user
could not be installed in the context of local UBP
support. The current UBP support level determines
whether a User Policy element was created or not
in this resource-exhaustion scenario. NOTIFICATION-TYPE .1.3.6.1.4.1.1754.1.1.7.11.7.3.1 |
ntnQosPolicyEvolDosAttackDetectedIndicates that the DAPP support has detected
an attack on the device generating this trap.
A notification is generated once for each unit
that contains ports on which an attack has been
detected. In addition to the required slot and
port data, additional ports on the unit that
has experienced a DAPP-detected DoS attack may
also be included in the trap. NOTIFICATION-TYPE .1.3.6.1.4.1.1754.1.1.7.11.7.3.2 |
avFcoeRedirEgressIssueDetectedIndicates that an event that impacts egress
data that is associated with one or more FCoE
Redirect entries has been detected. NOTIFICATION-TYPE .1.3.6.1.4.1.1754.1.1.7.11.7.3.3 |