ALTEON-TIGON-SWITCH-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ALTEON-TIGON-SWITCH-MIB.
171
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
171 total| Object Name |
|---|
hardware OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1754.1.6.1 |
hwPartNumberThe hardware part number of the Alteon Switch.ro DisplayString .1.3.6.1.4.1.1754.1.6.1.1 |
hwRevisionThe hardware revision. If the revision is not
available, a zero length string should be returned.ro DisplayString .1.3.6.1.4.1.1754.1.6.1.2 |
hwPowerSupplyStatusThe status of the internal power supply.ro Enumeration .1.3.6.1.4.1.1754.1.6.1.3 |
hwRedundantPSPresentExistence of redundant power supply.ro Enumeration .1.3.6.1.4.1.1754.1.6.1.4 |
hwRedundantPSStatusThe status of the redundant power supply.ro Enumeration .1.3.6.1.4.1.1754.1.6.1.5 |
hwSensor1TempThe temperature of the rear left sensor in degrees Celsius.ro INTEGER .1.3.6.1.4.1.1754.1.6.1.6 |
hwSensor2TempThe temperature of the rear middle sensor in degrees Celsius.ro INTEGER .1.3.6.1.4.1.1754.1.6.1.7 |
hwSensor3TempThe temperature of the front middle sensor in degrees Celsius.ro INTEGER .1.3.6.1.4.1.1754.1.6.1.8 |
hwSensor4TempThe temperature of the front right sensor in degrees Celsius.ro INTEGER .1.3.6.1.4.1.1754.1.6.1.9 |
agent OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.2 |
agGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.2.1 |
agSaveConfigurationThis is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup in flash and then the new
configuration is saved to the active configuration in flash.
When issued with notSaveActive, the active configuration
is NOT saved to the flash and the active configuration is
overwritten with the new configuration.
ok(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.1 |
agApplyConfigurationThis is an action object to apply the changes made to configuration
of the switch. By setting the value to apply(2), all the changes
made since the last apply are written to the new_config block.
other(1) is returned when this object ie read.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.2 |
agApplyPendingThis object, when read, gives the user information
whether an apply action is needed and that the configuration
has been chaged by the user actions. The user then can
apply the changes by setting proper value to the object
agApplyConfiguration described above.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.1.3 |
agResetThis is an action object to reboot the agent.
other(1) is returned always when read.
The following values are writable:
coldReset(2)...
warmReset(3)...rw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.4 |
agConfigForNxtResetThe configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration blockrw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.5 |
agImageForNxtResetThe software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2rw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.6 |
agSoftwareVersionThe version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available.ro DisplayString .1.3.6.1.4.1.1754.1.6.2.1.7 |
agBootVerThe version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available.ro DisplayString .1.3.6.1.4.1.1754.1.6.2.1.8 |
agImage1VerThe version of the software image stored in image 1 storage in the
form of 'major.minor.maintenance.bugfix'. A zero length string is
returned if version is not available or there is no valid
software image.ro DisplayString .1.3.6.1.4.1.1754.1.6.2.1.9 |
agImage2VerThe version of the software image stored in image 2 storage in the
form of 'major.minor.maintenance.bugfix'. A zero length string is
returned if version is not available or there is no valid software
image.ro DisplayString .1.3.6.1.4.1.1754.1.6.2.1.10 |
agRtcDateThe date on the real time clock in the form of 'mm/dd/yy'.
A zero length string is returned if date is not available.rw DisplayString .1.3.6.1.4.1.1754.1.6.2.1.11 |
agRtcTimeThe time on the real time clock in the form of 'hh:mm:ss'.
A zero length string is returned if time is not available.rw DisplayString .1.3.6.1.4.1.1754.1.6.2.1.12 |
agTftpServerIpAddrThe TFTP server IP address.rw IpAddress .1.3.6.1.4.1.1754.1.6.2.1.13 |
agTftpImageFileNameThe image file name to be downloaded.rw DisplayString .1.3.6.1.4.1.1754.1.6.2.1.14 |
agTftpImageWhether the image file should be loaded in image1 or image2 in flash.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.15 |
agTftpDownloadThis is an action object to cause to download software image
according to the setup of agTftpServerIpAddr, agTftpImageFileName,
agTftpImage when download(2) is issued.
other(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.16 |
agLastSetErrorReasonThe error reason of the last SET failure.ro DisplayString .1.3.6.1.4.1.1754.1.6.2.1.17 |
agTftpServerThe TFTP server IP address or domain name.rw DisplayString .1.3.6.1.4.1.1754.1.6.2.1.18 |
agTftpCfgFileNameThe configuration file name.rw DisplayString .1.3.6.1.4.1.1754.1.6.2.1.19 |
agTftpDumpFileNameThe file name for core dump.rw DisplayString .1.3.6.1.4.1.1754.1.6.2.1.20 |
agTftpActionThis is an action object to perform various TFTP Get or Put functions.
The TFTP sever is specified in agTftpServer object.
img-get(2) - Download switch image from a specified image
file (agTftpImageFileName) on the TFTP server to
the destinated storage (agTftpImage).
cfg-get(3) - Download switch configuration from a specified
file (agTftpCfgFileName) on the TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file (agTftpCfgFileName) on the TFTP server.
dump-put(5)- Download switch core dump to a specified
file (agTftpDumpFileName) on the TFTP server.
other(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.21 |
agTftpLastActionStatusThe recorded status of the previous TFTP activity.ro DisplayString .1.3.6.1.4.1.1754.1.6.2.1.22 |
agRevertThis is an action object to revert the unapplied changes
made to the switch. By setting the value to revert(2),
all the unapplied changes will be reverted. This action
will copy the current_config to the new_config block.
other(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.23 |
agRevertApplyThis is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted.
other(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.24 |
agEnabledSwFeaturesThe software features that are enabled on the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1754.1.6.2.1.25 |
agClrSyslogMsgsClears all current Syslog messages.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.1.26 |
agSavePendingThis object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.1.27 |
agEnabledGslbKeyQuery if software key Global slb enabled on switch.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.1.28 |
agEnabledBwmKeyQuery if software key Bandwidth Mgmt. enabled on switch.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.1.29 |
agSlotNumberIdentifies the slot in which this switch is installed. If the
agent implementing this MIB is not a blade in a chassis this
value has no meaning.ro INTEGER .1.3.6.1.4.1.1754.1.6.2.1.30 |
agEnabledRurlKeyThe status of the RURL software key.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.1.31 |
agGeneralConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.2.2 |
agNewCfgSyslogHostThe syslog host IP address, in the new_configuration block.rw IpAddress .1.3.6.1.4.1.1754.1.6.2.2.1 |
agCurCfgSyslogHostThe syslog host IP address, as currently configured in
the current_configuration block.ro IpAddress .1.3.6.1.4.1.1754.1.6.2.2.2 |
agNewCfgBootpEnable or disable the use of BootP, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.3 |
agCurCfgBootpEnable or disable the use of BootP, as currently configured in the
current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.4 |
agNewCfgSpanningTreeTurn On or Off Spanning Tree Protocol for the switch, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.5 |
agCurCfgSpanningTreeThe state of Spanning Tree Protocol for the switch, as
currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.6 |
agTrapHostTableMaxEntThe maximum number of rows in the trap host table.ro INTEGER .1.3.6.1.4.1.1754.1.6.2.2.7 |
agCurCfgTrapHostTableThe table of trap hosts which to send SNMP traps in the
current_configuration block. SEQUENCE OF AgCurCfgTrapHostEntry .1.3.6.1.4.1.1754.1.6.2.2.8 |
agCurCfgTrapHostEntryA row in the trap host table in the current_configuration block. AgCurCfgTrapHostEntry .1.3.6.1.4.1.1754.1.6.2.2.8.1 |
agCurCfgTrapHostIndxThe index of the row in trap host table.ro INTEGER .1.3.6.1.4.1.1754.1.6.2.2.8.1.1 |
agCurCfgTrapHostIpAddrThe IP address of a trap host.ro IpAddress .1.3.6.1.4.1.1754.1.6.2.2.8.1.2 |
agCurCfgTrapHostCommStringThe SNMP community string to use with the trap hostro DisplayString .1.3.6.1.4.1.1754.1.6.2.2.8.1.3 |
agNewCfgTrapHostTableThe table of trap hosts which to send SNMP traps in the
new_configuration block. SEQUENCE OF AgNewCfgTrapHostEntry .1.3.6.1.4.1.1754.1.6.2.2.9 |
agNewCfgTrapHostEntryA row in the trap host table in the new_configuration block. AgNewCfgTrapHostEntry .1.3.6.1.4.1.1754.1.6.2.2.9.1 |
agNewCfgTrapHostIndxThe index of the row in trap host table.ro INTEGER .1.3.6.1.4.1.1754.1.6.2.2.9.1.1 |
agNewCfgTrapHostIpAddrThe IP address of a trap host.rw IpAddress .1.3.6.1.4.1.1754.1.6.2.2.9.1.2 |
agNewCfgTrapHostCommStringThe SNMP community string to use with the trap hostrw DisplayString .1.3.6.1.4.1.1754.1.6.2.2.9.1.3 |
agCurCfgHttpServerPortThe TCP port number that the HTTP server is listening to
in the current_configuration block.ro INTEGER .1.3.6.1.4.1.1754.1.6.2.2.10 |
agNewCfgHttpServerPortThe TCP port number that the HTTP server is listening to
in the new_configuration block.rw INTEGER .1.3.6.1.4.1.1754.1.6.2.2.11 |
agCurCfgLoginBannerThe user defined login banner.ro DisplayString .1.3.6.1.4.1.1754.1.6.2.2.12 |
agNewCfgLoginBannerThe user defined login banner.rw DisplayString .1.3.6.1.4.1.1754.1.6.2.2.13 |
agNewCfgSyslog2HostThe second syslog host IP address, in the new_configuration block.rw IpAddress .1.3.6.1.4.1.1754.1.6.2.2.14 |
agCurCfgSyslog2HostThe second syslog host IP address, as currently configured in
the current_configuration block.ro IpAddress .1.3.6.1.4.1.1754.1.6.2.2.15 |
agCurCfgSyslogFacThe facility of syslog host in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.16 |
agNewCfgSyslogFacThe facility of syslog host in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.17 |
agCurCfgSyslog2FacThe facility of syslog2 host in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.18 |
agNewCfgSyslog2FacThe facility of syslogs host in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.19 |
agCurCfgSmtpHostThe user defined SMTP host.ro DisplayString .1.3.6.1.4.1.1754.1.6.2.2.20 |
agNewCfgSmtpHostThe user defined SMTP host.rw DisplayString .1.3.6.1.4.1.1754.1.6.2.2.21 |
agCurCfgConsoleEnable or disable console output of syslog messages.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.22 |
agNewCfgConsoleEnable or disable console output of syslog messages.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.23 |
agCurCfgMgmtNetworkThe management network - corresponding to the mnet command of
the slb configuration menu.ro IpAddress .1.3.6.1.4.1.1754.1.6.2.2.24 |
agNewCfgMgmtNetworkThe management network - corresponding to the mnet command of
the system menu.rw IpAddress .1.3.6.1.4.1.1754.1.6.2.2.25 |
agCurCfgMgmtMaskThe management subnet mask - corresponding to the mmask command
of the system configuration menu.ro IpAddress .1.3.6.1.4.1.1754.1.6.2.2.26 |
agNewCfgMgmtMaskThe management subnet mask - corresponding to the mmask command
of the system configuration menu.rw IpAddress .1.3.6.1.4.1.1754.1.6.2.2.27 |
agNTP OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.2.2.28 |
agCurCfgNTPServerThe NTP Server Address.ro IpAddress .1.3.6.1.4.1.1754.1.6.2.2.28.1 |
agNewCfgNTPServerThe NTP Server Address.rw IpAddress .1.3.6.1.4.1.1754.1.6.2.2.28.2 |
agCurCfgNTPResyncIntervalThe NTP Server resync interval in minutes.ro INTEGER .1.3.6.1.4.1.1754.1.6.2.2.28.3 |
agNewCfgNTPResyncIntervalThe NTP Server resync interval in minutes.rw INTEGER .1.3.6.1.4.1.1754.1.6.2.2.28.4 |
agCurCfgNTPTzoneThe NTP Server timezone offset from GMT in hours.ro DisplayString .1.3.6.1.4.1.1754.1.6.2.2.28.5 |
agNewCfgNTPTzoneThe NTP Server timezone offset from GMT in hours.rw DisplayString .1.3.6.1.4.1.1754.1.6.2.2.28.6 |
agCurCfgNTPDlightEnable/disable daylight savings time.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.28.7 |
agNewCfgNTPDlightEnable/disable daylight savings time.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.28.8 |
agCurCfgNTPServiceEnable/disable NTP Service.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.28.9 |
agNewCfgNTPServiceEnable/disable NTP Service.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.28.10 |
agLog OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.2.2.29 |
agNewCfgSyslogTrapConsoleEnable or disable console syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.1 |
agCurCfgSyslogTrapConsoleEnable or disable console syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.2 |
agNewCfgSyslogTrapSystemEnable or disable system level syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.3 |
agCurCfgSyslogTrapSystemEnable or disable system level syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.4 |
agNewCfgSyslogTrapMgmtEnable or disable management(flash, config, login) syslog and SNMP
trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.5 |
agCurCfgSyslogTrapMgmtEnable or disable management(flash, config, login) syslog and SNMP
trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.6 |
agNewCfgSyslogTrapCliEnable or disable CLI generated error syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.7 |
agCurCfgSyslogTrapCliEnable or disable CLI generated error syslog and SNMP trap, as
currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.8 |
agNewCfgSyslogTrapStpEnable or disable spanning tree syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.9 |
agCurCfgSyslogTrapStpEnable or disable spanning tree syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.10 |
agNewCfgSyslogTrapVlanEnable or disable VLAN syslog and SNMP trap, in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.11 |
agCurCfgSyslogTrapVlanEnable or disable VLAN syslog and SNMP trap, as currently configured
in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.12 |
agNewCfgSyslogTrapSlbEnable or disable SLB syslog and SNMP trap, in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.13 |
agCurCfgSyslogTrapSlbEnable or disable SLB syslog and SNMP trap, as currently configured
in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.14 |
agNewCfgSyslogTrapGslbEnable or disable GSLB syslog and SNMP trap, in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.15 |
agCurCfgSyslogTrapGslbEnable or disable GSLB syslog and SNMP trap, as currently configured
in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.16 |
agNewCfgSyslogTrapFilterEnable or disable filter syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.17 |
agCurCfgSyslogTrapFilterEnable or disable filter syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.18 |
agNewCfgSyslogTrapSshEnable or disable SSH, RADIUS syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.19 |
agCurCfgSyslogTrapSshEnable or disable SSH, RADIUS syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.20 |
agNewCfgSyslogTrapVrrpEnable or disable VRRP syslog and SNMP trap, in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.21 |
agCurCfgSyslogTrapVrrpEnable or disable VRRP syslog and SNMP trap, as currently configured
in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.22 |
agNewCfgSyslogTrapBgpEnable or disable BGP syslog and SNMP trap, in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.23 |
agCurCfgSyslogTrapBgpEnable or disable BGP syslog and SNMP trap, as currently configured
in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.24 |
agNewCfgSyslogTrapNtpEnable or disable NTP syslog and SNMP trap, in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.25 |
agCurCfgSyslogTrapNtpEnable or disable NTP syslog and SNMP trap, as currently configured
in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.26 |
agNewCfgSyslogTrapIsdEnable or disable ISD syslog and SNMP trap, in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.27 |
agCurCfgSyslogTrapIsdEnable or disable ISD syslog and SNMP trap, as currently configured
in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.28 |
agNewCfgSyslogTrapIpEnable or disable IP related syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.31 |
agCurCfgSyslogTrapIpEnable or disable IP related syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.32 |
agNewCfgSyslogTrapWebEnable or disable WEBUI related syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.35 |
agCurCfgSyslogTrapWebEnable or disable WEBUI related syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.36 |
agNewCfgSyslogTrapSynAtkEnable or disable SYN attack detection related syslog and SNMP trap,
in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.37 |
agCurCfgSyslogTrapSynAtkEnable or disable SYN attack detection related syslog and SNMP trap,
as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.38 |
agNewCfgSyslogTrapTcpLimEnable or disable TCP rate limiting related syslog and SNMP trap,
in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.39 |
agCurCfgSyslogTrapTcpLimEnable or disable TCP rate limiting related syslog and SNMP trap,
as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1754.1.6.2.2.29.40 |
stats OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.8 |
memStats OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.8.12 |
memStatsAllocsThe total number of memory allocations.ro Counter .1.3.6.1.4.1.1754.1.6.8.12.1 |
memStatsFreesThe total number of memory frees.ro Counter .1.3.6.1.4.1.1754.1.6.8.12.2 |
memStatsAllocFailsThe total number of memory allocations failed.ro Counter .1.3.6.1.4.1.1754.1.6.8.12.3 |
memStatsBytesCurrThe outstanding memory in bytes have been allocated.ro Gauge .1.3.6.1.4.1.1754.1.6.8.12.4 |
memStatsBytesHiwatBytes allocated witch high water mark.ro Gauge .1.3.6.1.4.1.1754.1.6.8.12.5 |
memStatsPoolBytesThe total bytes in the memory pool.ro Gauge .1.3.6.1.4.1.1754.1.6.8.12.6 |
memStatsLargestThe largest block has been allocated.ro Gauge .1.3.6.1.4.1.1754.1.6.8.12.7 |
pktStats OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.8.13 |
pktStatsAllocsThe total packets have been allocated.ro Counter .1.3.6.1.4.1.1754.1.6.8.13.1 |
pktStatsFreesThe total packets have been freed.ro Counter .1.3.6.1.4.1.1754.1.6.8.13.2 |
pktStatsAllocFailsThe total packet allocations failed.ro Counter .1.3.6.1.4.1.1754.1.6.8.13.3 |
pktStatsMediumsThe number of medium size packets have been allocated.ro Counter .1.3.6.1.4.1.1754.1.6.8.13.4 |
pktStatsJumbosThe number of jumbo size packets have been allocated.ro Counter .1.3.6.1.4.1.1754.1.6.8.13.5 |
pktStatsSmallsThe number of small size packets have been allocated.ro Counter .1.3.6.1.4.1.1754.1.6.8.13.6 |
mpCpuStats OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.8.16 |
mpCpuAStatsUtil1SecondThe utilization of MP CPU A over 1 second. It shows the percentage.ro INTEGER .1.3.6.1.4.1.1754.1.6.8.16.1 |
mpCpuBStatsUtil1SecondThe utilization of MP CPU B over 4 seconds.
It shows the percentage.ro INTEGER .1.3.6.1.4.1.1754.1.6.8.16.2 |
mpCpuAStatsUtil4SecondsThe utilization of MP CPU A over 4 seconds.
It shows the percentage.ro INTEGER .1.3.6.1.4.1.1754.1.6.8.16.3 |
mpCpuBStatsUtil4SecondsThe utilization of MP CPU B over 4 seconds.
It shows the percentage.ro INTEGER .1.3.6.1.4.1.1754.1.6.8.16.4 |
mpCpuAStatsUtil64SecondsThe utilization of MP CPU A over 64 seconds.
It shows the percentage.ro INTEGER .1.3.6.1.4.1.1754.1.6.8.16.5 |
mpCpuBStatsUtil64SecondsThe utilization of MP CPU B over 64 second.
It shows the percentage.ro INTEGER .1.3.6.1.4.1.1754.1.6.8.16.6 |
information OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.9 |
altswitchTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.13 |
operCmds OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.14 |
radius OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.6.16 |
radCurCfgPrimaryIpAddrThe IP address of the Primary RADIUS server.ro IpAddress .1.3.6.1.4.1.1754.1.6.16.1 |
radNewCfgPrimaryIpAddrThe IP address of the Primary RADIUS server.rw IpAddress .1.3.6.1.4.1.1754.1.6.16.2 |
radCurCfgSecondaryIpAddrThe IP address of the Secondary RADIUS server.ro IpAddress .1.3.6.1.4.1.1754.1.6.16.3 |
radNewCfgSecondaryIpAddrThe IP address of the Secondary RADIUS server.rw IpAddress .1.3.6.1.4.1.1754.1.6.16.4 |
radCurCfgPortSpecify the RADIUS port number.ro INTEGER .1.3.6.1.4.1.1754.1.6.16.5 |
radNewCfgPortSpeicfy the RADIUS port number.rw INTEGER .1.3.6.1.4.1.1754.1.6.16.6 |
radCurCfgTimeoutThe maximum number of seconds before resending authentication
to RADIUS server.ro INTEGER .1.3.6.1.4.1.1754.1.6.16.7 |
radNewCfgTimeoutThe maximum number of seconds before resending authentication
to RADIUS server.rw INTEGER .1.3.6.1.4.1.1754.1.6.16.8 |
radCurCfgRetriesNumber of retries to the RADIUS server.ro INTEGER .1.3.6.1.4.1.1754.1.6.16.9 |
radNewCfgRetriesNumber of retries to the RADIUS server.rw INTEGER .1.3.6.1.4.1.1754.1.6.16.10 |
radCurCfgStateEnable or disbale RADIUS authentication.ro Enumeration .1.3.6.1.4.1.1754.1.6.16.11 |
radNewCfgStateEnable or disable RADIUS authentication.rw Enumeration .1.3.6.1.4.1.1754.1.6.16.12 |
radCurCfgAuthenStringThe RADIUS authentication string.ro DisplayString .1.3.6.1.4.1.1754.1.6.16.13 |
radNewCfgAuthenStringThe RADIUS authentication string.rw DisplayString .1.3.6.1.4.1.1754.1.6.16.14 |
radCurCfgTelnetEnable or disbale RADIUS backdoor for telnet.ro Enumeration .1.3.6.1.4.1.1754.1.6.16.15 |
radNewCfgTelnetEnable or disable RADIUS backdoor for telnet.rw Enumeration .1.3.6.1.4.1.1754.1.6.16.16 |