SLA-MONITOR-MIB
AI MIB Summary
The SLA-MONITOR-MIB enables Avaya management systems to monitor Service Level Agreement (SLA) performance metrics, such as packet loss, jitter, latency, and availability, via the SLA Monitor Agent. This module facilitates the collection of application-layer quality data to verify compliance with defined service thresholds and trigger alerts upon degradation.
An Avaya management module containing data definitions related to the SLA Monitor Agent.
Main OID:
slaMonitorMib.1.3.6.1.4.1.1754.1.1.7.11.8
110
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
110 total| Object Name |
|---|
slaMonitorMibAn Avaya management module containing data
definitions related to the SLA Monitor Agent. MODULE-IDENTITY .1.3.6.1.4.1.1754.1.1.7.11.8 |
slaMonitorMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.8.0 |
slaMonitorAgentExceptionDetectedIndicates that an exception event that impacts
the local SLA Monitor agent has been detected. NOTIFICATION-TYPE .1.3.6.1.4.1.1754.1.1.7.11.8.0.1 |
slaMonitorMibClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.8.1 |
slaMonitorAgtClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.8.1.1 |
slaMonitorAgentStatusThe value of this attribute indicates whether
the SLA Monitor agent is enabled or not. An agent
that is enabled will respond to SLA Monitor
server discovery packets. A disabled agent will
remain dormant until manually enabled.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.1 |
slaMonitorAgentAddressTypeThe type of IP address used by the agent. This
object is limited to IPv4 and IPv6 addresses.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.2 |
slaMonitorAgentAddressThe IP address currently used by the SLA Monitor agent.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.3 |
slaMonitorAgentPortThe UDP port currently used by the SLA Monitor
agent for agent-server communication.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.4 |
slaMonitorAgentRegisteredWithServerThe value of this attribute indicates whether
the SLA Monitor agent is registered with an SLA
Monitor server or not.ro Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.5 |
slaMonitorAgentRegisteredServerAddrTypeThe type of IP address used by the server. This
object is limited to IPv4 and IPv6 addresses.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.6 |
slaMonitorAgentRegisteredServerAddrThe IP address of the SLA Monitor server with which
the agent is currently registered.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.7 |
slaMonitorAgentRegisteredServerPortThe TCP port utilized by the SLA Monitor server with
which the agent is currently registered.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.8 |
slaMonitorAgentRegistrationTimeSpecifies the maximum amount of time, in seconds,
until the current registration period expires.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.9 |
slaMonitorAgentCliAvailableThe value of this attribute indicates whether
the SLA Monitor agent CLI is available or not.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.10 |
slaMonitorAgentCliTimeoutSpecifies the maximum amount of time, in seconds,
until the CLI session is automatically terminated.
The value of this attribute is pertinent only if CLI
timeouts are enabled (slaMonitorAgentCliTimeoutMode
equals 'enable(1)').rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.11 |
slaMonitorAgentCliTimeoutModeThe value of this attribute indicates whether
the SLA Monitor agent automatic CLI session
timeout is enabled or not. When this attribute
is set to 'enable(1)', a CLI session will
automatically timeout after slaMonitorAgentCliTimeout
seconds.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.12 |
slaMonitorAgentSupportedAppsAn enumeration of the SLA Monitor agent capabilities.ro Bits .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.13 |
slaMonitorAgentConfiguredAgentAddrTypeThe type of IP address used by the agent. This
object is limited to IPv4 and IPv6 addresses.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.14 |
slaMonitorAgentConfiguredAgentAddrThe IP address of the SLA Monitor agent. If the value
of this attribute is 0.0.0.0, the SLA Monitor agent will
utilize an active device IP address by default.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.15 |
slaMonitorAgentConfiguredAgentPortThe UDP port utilized by the SLA Monitor agent for
agent-server communication. If the value of this
attribute is zero, the SLA Monitor agent will utilize
a default port value for communication purposes.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.16 |
slaMonitorAgentConfiguredServerAddrTypeThe type of IP address used by the server. This
object is limited to IPv4 and IPv6 addresses.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.17 |
slaMonitorAgentConfiguredServerAddrThe IP address of the SLA Monitor server with which
the agent is allowed to register. If the value of this
attribute is not 0.0.0.0, the SLA Monitor agent may
only respond to server requests originating at the
specified IP address (or the IP address specified by
the slaMonitorAgentConfiguredAltServerAddr object if
it is non-zero).rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.18 |
slaMonitorAgentConfiguredServerPortThe TCP port utilized by the SLA Monitor server with
which the agent is allowed to register. If the value
of this attribute is non-zero, the SLA Monitor agent
may only respond to server requests originating from
the specified port (or from the port specified by the
slaMonitorAgentConfiguredAltServerPort object if it
is non-zero).rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.19 |
slaMonitorAgentConfiguredAltServerAddrTypeThe type of IP address used by the server. This
object is limited to IPv4 and IPv6 addresses.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.20 |
slaMonitorAgentConfiguredAltServerAddrThe IP address of the alternate SLA Monitor server
with which the agent is allowed to register. If the
value of this attribute is not 0.0.0.0, the SLA Monitor
agent may only respond to server requests originating
at the specified IP address (or the IP address
specified by the slaMonitorAgentConfiguredServerAddr
object if it is non-zero).rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.21 |
slaMonitorAgentConfiguredAltServerPortThe TCP port utilized by the alternate SLA Monitor
server with which the agent is allowed to register.
If the value of this attribute is non-zero, the SLA
Monitor agent may only respond to server requests
originating from the specified port (or from the port
specified by the slaMonitorAgentConfiguredServerPort
object if it is non-zero).rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.22 |
slaMonitorAgentToAgentPortThe base UDP port currently used by the SLA Monitor
agent for agent-agent communication. The base UDP port
is used to derive multiple agent communication ports.
An even base port values causes slaMonitorAgentToAgentPort
and slaMonitorAgentToAgentPort+1 ports to be used. An
odd base port values causes slaMonitorAgentToAgentPort
and slaMonitorAgentToAgentPort-1 ports to be used.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.23 |
slaMonitorAgentConfiguredAgentToAgentPortThe UDP port utilized by the SLA Monitor agent for
agent-agent communication. If the value of this
attribute is zero, the SLA Monitor agent will utilize
a default port value for the base agent-agent UDP
communication port.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.24 |
slaMonitorAgentEncryptionSupportSpecifies if encrypted agent-server communication
is supported by the agent.ro Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.25 |
slaMonitorAgentConfiguredAgentVrfNameThe name of the virtual Router which SLA Monitor
Agent IP address (slaMonitorAgentConfiguredAgentAddr)
is associated with. This is only supported on VSP9K
for nowrw DisplayString .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.26 |
slaMonitorAgentSlaParameterString directly passed to the SLA Agent as parameterrw DisplayString .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.27 |
slaMonitorAgentCertFileInstallActionOperation object to install and deinstall the
certificate file to a platform specific location.
'noactio' -is default setting and always is returned
when this object is queried.
'install', object slaMonitorAgentCertFile will be
used as source certificate file to install .
'deinstall', will ignore object slaMonitorAgentCertFile
and just deinstall or remove the certificate file
from the installed locationrw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.28 |
slaMonitorAgentCertFilethe certification file name for installation.
It is only valid or used when object
slaMonitorAgentCertFileInstallAction
is set to install. Otherwise, it will be ignoredrw DisplayString .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.29 |
slaMonitorAgentServerBypassThe value of this attribute determines whether
the SLA Monitor agent can perform certain operations
without being registered with a server. When this
attribute is set to 'enable(1)', an agent will respond
to agent-to-agent test requests regardless of the
server registration status. A 'disable(2)' setting
will restrict agent responses when the agent is not
registered with an SLA Monitor server.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.30 |
slaMonitorAgentRefuseServerTestsThe value of this attribute determines whether
the SLA Monitor agent will refuse test requests
from the server. When this attribute is set to
'allow(1)', an agent will accept test requests
from the server. A 'refuse(2)' setting will cause
the agent to reject test requests from the server.
From a usage perspective, it may be necessary to
temporarily refuse server test requests if the
agent is being actively managed by a server but
the administrator wishes to use the CLI or SNMP
interfaces to initiate tests manually.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.1.31 |
slaMonitorAgtTestClasses OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.8.1.2 |
slaMonitorNtrCtrlTableDefines the SLAMon agent NTR test control table supporting
the ability to initiate NTR tests remotely. The results of
NTR test operations are stored in the slaMonitorNtrResultsTable
and the slaMonitorNtrHopsTable. SEQUENCE OF SlaMonitorNtrCtrlEntry .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1 |
slaMonitorNtrCtrlEntryDefines an entry in the slaMonitorNtrCtrlTable. The first
index element, slaMonitorNtrCtrlOwnerId, is of type SnmpAdminString,
allowing for a management application to identify its entries.
The second index, slaMonitorNtrCtrlTestName (also an SnmpAdminString),
enables the same management application to have multiple requests
configured. SlaMonitorNtrCtrlEntry .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1 |
slaMonitorNtrCtrlOwnerIdThe owner of an NTR test. SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.1 |
slaMonitorNtrCtrlTestNameThe name of an NTR test. This value is locally unique,
within the scope of an slaMonitorNtrCtrlOwnerId. SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.2 |
slaMonitorNtrCtrlTargetAddressTypeSpecifies the target address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.3 |
slaMonitorNtrCtrlTargetAddressSpecifies the target address used for the
NTR test. The address type can be determined
by examining the value of the corresponding
slaMonitorNtrCtrlTargetAddressType.
A value for this object MUST be provided
during entry creation.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.4 |
slaMonitorNtrCtrlDscpSpecifies the DSCP value for use in packets that
are generated by the NTR test.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.5 |
slaMonitorNtrCtrlAttemptsSpecifies the number of attempts are
generated by the NTR test.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.6 |
slaMonitorNtrCtrlPeriodSpecifies the interval between packets, in
microseconds, generated by the NTR test.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.7 |
slaMonitorNtrCtrlAdminStatusUsed to initiate an NTR test:
enabled(1) - initiate the test as defined by this
slaMonitorNtrCtrlEntry.
disabled(2) - deactivate the test defined by this
slaMonitorNtrCtrlEntry, if possible.
Refer to the corresponding slaMonitorNtrResultsOperStatus
to determine the operational state of the test defined by
this entry. When queried, 'disabled(2)' is always returned
for this attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.8 |
slaMonitorNtrCtrlLabelA label used to reference the NTR control entry
in a textual manner.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.9 |
slaMonitorNtrCtrlStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.10 |
slaMonitorNtrCtrlRowStatusThis object allows entries to be created and deleted
in the slaMonitorNtrCtrlTable.
Deletion of an entry in this table results in the
deletion of all corresponding (i.e., entries with the
same slaMonitorNtrCtrlOwnerId and slaMonitorNtrCtrlTestName
index values) entries in the slaMonitorNtrResultsTable and
the slaMonitorNtrHopsTable.
Initiation of an NTR test corresponding to this entry
is controlled via slaMonitorNtrCtrlAdminStatus and not
by entry creation.
The operational state of an NTR test can be determined
by examining the corresponding slaMonitorNtrResultsOperStatus
object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.1.1.11 |
slaMonitorNtrResultsTableDefines the SLAMon agent NTR results table that is used
to track the status of NTR tests initiated through the
the slaMonitorNtrCtrlTable.
An entry is added to the slaMonitorNtrResultsTable when
an NTR test defined by an slaMonitorNtrCtrlEntry is started
by transition of its slaMonitorNtrCtrlAdminStatus object to
'enabled(1)'.
If the object slaMonitorNtrCtrlAdminStatus has the value
'disabled(2)', then successfully writing 'enabled(1)' to
the object slaMonitorNtrCtrlAdminStatus re-initializes an
already existing entry in the slaMonitorNtrResultsTable.
The values of objects in the re-initialized entry are the
same as the values of objects in a new entry would be.
An entry is removed from the slaMonitorNtrResultsTable when
its corresponding slaMonitorNtrCtrlEntry is deleted. SEQUENCE OF SlaMonitorNtrResultsEntry .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2 |
slaMonitorNtrResultsEntryDefines an entry in the slaMonitorNtrResultsTable. The
slaMonitorNtrResultsTable has the same indexing as the
slaMonitorNtrCtrlTable so that a slaMonitorNtrResultsEntry
corresponds to the slaMonitorNtrCtrlEntry that caused it to
be created. SlaMonitorNtrResultsEntry .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1 |
slaMonitorNtrResultsOperStatusReflects the operational state of an slaMonitorNtrCtrlEntry:
inProgress(1) - test is active.
aborted(2) - test has been stopped. Refer to object
slaMonitorNtrResultsAbortData for details.
completed(3) - test is completed. Refer to objects
slaMonitorNtrResultsCompletionData and
slaMonitorNtrResultsCompletionSummary for
details.ro Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.1 |
slaMonitorNtrResultsSrcAddressTypeSpecifies the address type of the source IP
address used for this test.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.2 |
slaMonitorNtrResultsSrcAddressSpecifies the source IP address used
for this test.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.3 |
slaMonitorNtrResultsDstAddressTypeSpecifies the address type of the destination IP
address used for this test.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.4 |
slaMonitorNtrResultsDstAddressSpecifies the destination IP address used
for this test.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.5 |
slaMonitorNtrResultsSrcPortSpecifies the Layer 4 source port used for this test.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.6 |
slaMonitorNtrResultsDstPortSpecifies the Layer 4 destination port used for this test.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.7 |
slaMonitorNtrResultsDscpSpecifies the DSCP value contained in NTR test packets
generated by the agent for this test.ro Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.8 |
slaMonitorNtrResultsTTLThe maximum time-to-live (TTL) value used during the
execution of this test.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.9 |
slaMonitorNtrResultsCompletionDataProvides details related to test completion.
Multiple bits may be set to convey test status.ro Bits .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.10 |
slaMonitorNtrResultsCompletionSummaryA user-readable string that is used to convey test
results for completed tests in an easy-to-understand
format.ro SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.11 |
slaMonitorNtrResultsAbortDataProvides details for tests that were aborted.
Multiple bits may be set to convey test status.ro Bits .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.12 |
slaMonitorNtrResultsHopCountThe total number of hops for which information has been
acquired during the execution of this test.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.2.1.13 |
slaMonitorNtrHopsTableDefines the SLAMon agent NTR test hop table for
keeping track of the results of NTR tests on a
per-hop basis. SEQUENCE OF SlaMonitorNtrHopsEntry .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.3 |
slaMonitorNtrHopsEntryDefines an entry in the slaMonitorNtrHopsTable.
The first two index elements identify the
slaMonitorNtrCtrlEntry with which this
slaMonitorNtrHopsEntry is associated. The
third index element, slaMonitorNtrHopsHopIndex,
selects a hop in an NTR test path. SlaMonitorNtrHopsEntry .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.3.1 |
slaMonitorNtrHopsHopIndexSpecifies the hop index for an NTR test hop.
Values for this object with respect to the same
slaMonitorNtrCtrlOwnerId and slaMonitorNtrCtrlTestName
MUST start at 1 and be given increasing values for
subsequent hops. The value of slaMonitorNtrHopsHopIndex
does not necessarily represent the number of the hop
on the traced path, though this is normally the case. Unsigned32 (1..'ffffffff'h) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.3.1.1 |
slaMonitorNtrHopsTgtAddressTypeThis object indicates the type of address stored
in the corresponding slaMonitorNtrHopsTgtAddress
object.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.3.1.2 |
slaMonitorNtrHopsTgtAddressThis object reports the IP address associated with
the NTR test hop.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.3.1.3 |
slaMonitorNtrHopsRttThe NTR test round-trip-time (RTT), in microseconds,
computed for this hop.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.3.1.4 |
slaMonitorNtrHopsIngressDscpThe DSCP value in the NTR test packet received by
the target host (slaMonitorNtrHopsTgtAddress) for
this hop.ro Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.3.1.5 |
slaMonitorNtrHopsEgressDscpThe DSCP value in the NTR test response packet
received by the SLAMon agent for this hop.ro Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.3.1.6 |
slaMonitorRtpCtrlTableDefines the SLAMon agent RTP test control table supporting
the ability to initiate RTP tests remotely. The results of
RTP test operations are stored in the slaMonitorRtpResultsTable. SEQUENCE OF SlaMonitorRtpCtrlEntry .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4 |
slaMonitorRtpCtrlEntryDefines an entry in the slaMonitorRtpCtrlTable. The first
index element, slaMonitorRtpCtrlOwnerId, is of type SnmpAdminString,
allowing for a management application to identify its entries.
The second index, slaMonitorRtpCtrlTestName (also an SnmpAdminString),
enables the same management application to have multiple requests
configured. SlaMonitorRtpCtrlEntry .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1 |
slaMonitorRtpCtrlOwnerIdThe owner of an RTP test. SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.1 |
slaMonitorRtpCtrlTestNameThe name of an RTP test. This is locally unique,
within the scope of an slaMonitorRtpCtrlOwnerId. SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.2 |
slaMonitorRtpCtrlTargetAddressTypeSpecifies the target address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.3 |
slaMonitorRtpCtrlTargetAddressSpecifies the target address used for the
RTP test. The address type can be determined
by examining the value of the corresponding
slaMonitorRtpCtrlTargetAddressType.
A value for this object MUST be provided
during entry creation.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.4 |
slaMonitorRtpCtrlDscpSpecifies the DSCP value for use in packets that
are generated by the RTP test.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.5 |
slaMonitorRtpCtrlTestPacketsSpecifies the number of test packets that are
generated by the RTP test. Test packets are used
for jitter determination.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.6 |
slaMonitorRtpCtrlSyncPacketsSpecifies the number of synchronization packets
that are generated by the RTP test. Sync packets
are used for network delay determination.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.7 |
slaMonitorRtpCtrlPeriodSpecifies the interval between packets (in
microseconds) generated by the RTP test.rw Integer32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.8 |
slaMonitorRtpCtrlAdminStatusUsed to initiate an RTP test:
enabled(1) - initiate the test as defined by this
slaMonitorRtpCtrlEntry.
disabled(2) - deactivate the test defined by this
slaMonitorRtpCtrlEntry, if possible.
Refer to the corresponding slaMonitorRtpResultsOperStatus
to determine the operational state of the test defined by
this entry. When queried, 'disabled(2)' is always returned
for this attribute.rw Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.9 |
slaMonitorRtpCtrlLabelA label used to reference the RTP control entry
in a textual manner.rw SnmpAdminString .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.10 |
slaMonitorRtpCtrlStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.11 |
slaMonitorRtpCtrlRowStatusThis object allows entries to be created and deleted
in the slaMonitorRtpCtrlTable.
Deletion of an entry in this table results in the
deletion of all corresponding (i.e., entries with the
same slaMonitorRtpCtrlOwnerId and slaMonitorRtpCtrlTestName
index values) entries in the slaMonitorRtpResultsTable.
Initiation of an RTP test corresponding to this entry
is controlled via slaMonitorRtpCtrlAdminStatus and not
by entry creation.
The operational state of an RTP test can be determined
by examining the corresponding slaMonitorRtpResultsOperStatus
object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.4.1.12 |
slaMonitorRtpResultsTableDefines the SLAMon agent RTP results table that is used
to track the status of RTP tests initiated through the
the slaMonitorRtpCtrlTable.
An entry is added to the slaMonitorRtpResultsTable when
an RTP test defined by an slaMonitorRtpCtrlEntry is started
by transition of its slaMonitorRtpCtrlAdminStatus object to
'enabled(1)'.
If the object slaMonitorRtpCtrlAdminStatus has the value
'disabled(2)', then successfully writing 'enabled(1)' to
the object slaMonitorRtpCtrlAdminStatus re-initializes an
already existing entry in the slaMonitorRtpResultsTable.
The values of objects in the re-initialized entry are the
same as the values of objects in a new entry would be.
An entry is removed from the slaMonitorRtpResultsTable when
its corresponding slaMonitorRtpCtrlEntry is deleted. SEQUENCE OF SlaMonitorRtpResultsEntry .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5 |
slaMonitorRtpResultsEntryDefines an entry in the slaMonitorRtpResultsTable. The
slaMonitorRtpResultsTable has the same indexing as the
slaMonitorRtpCtrlTable so that a slaMonitorRtpResultsEntry
corresponds to the slaMonitorRtpCtrlEntry that caused it to
be created. SlaMonitorRtpResultsEntry .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1 |
slaMonitorRtpResultsOperStatusReflects the operational state of an slaMonitorRtpCtrlEntry:
inProgress(1) - test is active.
aborted(2) - test has been stopped. Refer to object
slaMonitorRtpResultsAbortData for details.
completed(3) - test is completed. Refer to objects
that contain completed test results (all
attributes except slaMonitorRtpResultsAbortData)
for details.ro Enumeration .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.1 |
slaMonitorRtpResultsSrcAddressTypeSpecifies the address type of the source IP
address used for this test.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.2 |
slaMonitorRtpResultsSrcAddressSpecifies the source IP address used
for this test.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.3 |
slaMonitorRtpResultsDstAddressTypeSpecifies the address type of the destination IP
address used for this test.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.4 |
slaMonitorRtpResultsDstAddressSpecifies the destination IP address used
for this test.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.5 |
slaMonitorRtpResultsSrcPortSpecifies the Layer 4 source port used for this test.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.6 |
slaMonitorRtpResultsDstPortSpecifies the Layer 4 destination port used for this test.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.7 |
slaMonitorRtpResultsDscpSpecifies the DSCP value contained in RTP test packets
generated by the agent for this test.ro Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.8 |
slaMonitorRtpResultsAverageDelayThe average network delay (RTT) experienced during this
test sequence, in microseconds.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.9 |
slaMonitorRtpResultsMedianDelayThe median network delay (RTT) experienced during this
test sequence, in microseconds.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.10 |
slaMonitorRtpResultsPacketLossA count of packets lost during this test sequence.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.11 |
slaMonitorRtpResultsOutOfOrderArrivalsThe number of out-of-order arrivals detected during
this test sequence.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.12 |
slaMonitorRtpResultsJitterQuartile0The quartile 0 network jitter value, in microseconds,
experienced during this test sequence.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.13 |
slaMonitorRtpResultsJitterQuartile1The quartile 1 network jitter value, in microseconds,
experienced during this test sequence.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.14 |
slaMonitorRtpResultsJitterQuartile2The quartile 2 network jitter value, in microseconds,
experienced during this test sequence.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.15 |
slaMonitorRtpResultsJitterQuartile3The quartile 3 network jitter value, in microseconds,
experienced during this test sequence.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.16 |
slaMonitorRtpResultsJitterQuartile4The quartile 4 network jitter value, in microseconds,
experienced during this test sequence.ro Unsigned32 .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.17 |
slaMonitorRtpResultsAbortDataProvides details for tests that were aborted.
Multiple bits may be set to convey test status.ro Bits .1.3.6.1.4.1.1754.1.1.7.11.8.1.2.5.1.18 |
slaMonitorMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.8.2 |
slaMonitorMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.8.2.1 |
slaMonitorMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1754.1.1.7.11.8.2.2 |