NSCTRAP
AI MIB Summary
Standard SNMP MIB module defining data structures for NSCTRAP.
34
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
nsc OBJECT IDENTIFIER .1.3.6.1.4.1.10 |
RFC1155-SMI Unknown .1.3.6.1.4.1.10 |
nscMib OBJECT IDENTIFIER .1.3.6.1.4.1.10.2 |
nscManagement OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.2 |
nscTraps OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.2.4 |
protocolBoundA protocolBound trap is sent when a protocol is bound
to an interface. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.1 |
protocolUnboundA protocolBound trap is sent when a protocol is unbound
from an interface. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.2 |
physicalLinkUpA physicalLinkUp trap is sent for devices that
represent both a logical and physical device. The
physicalLinkUp trap is sent when the physical device
becomes active. The SNMP linkUp is sent when the
logical device becomes active. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.3 |
physicalLinkDownA physicalLinkDown trap is sent for devices that
represent both a logical and physical device. The
physicalLinkDown trap is sent when the physical device
becomes not active. The SNMP linkDown is sent when
the logical device becomes not active. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.4 |
fddiWrapA FDDI wrap trap indicates that a FDDI ring is broken
and the signal path wraps through a device and out the
parallel fiber. The trap also occures when the wrapped
condition is relieved. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.5 |
vcpActiveThis trap indicates that a VCP physical link just came up. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.6 |
vcpInactiveThis trap indicates that a VCP physical link just went down. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.7 |
vcpReconfigThis trap indicates that a VCP physical link is reconfiguring. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.8 |
vcpBrokenThis trap indicates that a VCP physical link lost connection
with its remote end. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.9 |
vcpMisconfiguredThis trap indicates that a VCP physical link has detected
different configuration on the remote end. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.10 |
decNetCircDownFaultThis trap shows that a fault has brought down
the indicated DECnet circuit. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.407 |
decNetCircDownThis trap indicates that the named DECnet circuit
is down. (This trap is not supported.) TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.408 |
decNetCircUpThis trap indicates that a DECnet circuit has
become enabled. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.410 |
decNetNodeReachChgThis trap reports a change in the nodes that can be
reached. (This trap is not supported.) TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.414 |
decNetAdjUpThis trap indicates that a DECnet adjacent node
just has come up. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.415 |
decNetAdjRejectedThis trap indicates that an adjacent node has
been rejected of communication, or become inactive.
The reason could be either the numbers of broadcast
(non)routers or the address of a node exceeds the
ones in the router's configuartion. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.416 |
decNetAreaReachChgThis trap reports a change in the areas that can be
reached. (This trap is not supported.) TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.417 |
decNetAdjDownThis trap indicates that a adjacent node has
come down or lost. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.418 |
decNetDesignatedRouterThis trap reports a change in the designated router. TRAP-TYPE .1.3.6.1.4.1.10.2.2.4.0.422 |
nscTrapsProtBindIndexThe communication protocols whose bind state changes
would cause traps to be generated. Enumeration .1.3.6.1.4.1.10.2.2.4.1 |
nscTrapsFddiSMTCFStateThe attachment configuration for the station or
concentrator. The values are the same as those
defined in the SMT group in RFC-1285. Enumeration .1.3.6.1.4.1.10.2.2.4.2 |
nscTrapsDecNetAreaNbr OCTET STRING .1.3.6.1.4.1.10.2.2.4.3 |
nscTrapsDecNetNodeNbr OCTET STRING .1.3.6.1.4.1.10.2.2.4.4 |
nscTrapsDecNetCircuitNameThe name of a DECnet circuit. DisplayString .1.3.6.1.4.1.10.2.2.4.5 |
nscTrapsDecNetEventReasonThe reason that causes the routing event to
happen. Possible reasons are:
SYNC_LOST (0),
DATA_ERRORS (1),
UNEXPECTED_PKT_TYPE (2),
ROUTING_UPDATE_CHECKSUM_ERROR (3),
ADJ_ADDR_CHANGE (4),
VERIF_RECV_TIMEOUT (5),
VERSION_SKEW (6),
ADJ_ADDR_OUT_OF_RANGE (7),
ADJ_BLOCK_SIZE_TOO_SMALL (8),
INVALID_VERIF_SEED_VALUE (9),
ADJ_LIST_RECV_TIMEOUT (10),
ADJ_LIST_RECV_INVALID_DATA (11),
CALL_FAILED (12),
VERIF_PASSWORD_REQ_FROM_PIII_NODE (13),
DROPPED_BY_ADJ_NODE (14). DisplayString .1.3.6.1.4.1.10.2.2.4.6 |
nscTrapsDecNetReachStatusThe reachable status of a node or area. Enumeration .1.3.6.1.4.1.10.2.2.4.7 |
nscTrapsVcpPortNameThe name of the VCP port. DisplayString .1.3.6.1.4.1.10.2.2.4.8 |
nscTrapsVcpLogicalStateThe logical state of a VCP port. The possible states
are ACTIVE, DOWN, DISABLED. DisplayString .1.3.6.1.4.1.10.2.2.4.9 |
nscTrapsVcpPhysicalStateThe physical state of a VCP port. The possible states
are Off, On, Broken_Cannot_IO, Broken_Purge,
Broken_Reconfigure, Broken_Misconfigure. DisplayString .1.3.6.1.4.1.10.2.2.4.10 |