NSCHippiSonet-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for NSCHippiSonet-MIB.
62
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
62 total| Object Name |
|---|
IMPORTSString describing the current state of the engine.ro Unknown .1.3.6.1.4.1.10.2.1.5.1 |
nscHippiSonetRegisters OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.5.2 |
nscHippiSonetUnframer OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.5.2.1 |
nscHippiSonetUnframerStatusUnframer status register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.1.1 |
nscHippiSonetUnframerOHdmaUnframer overhead DMA register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.1.2 |
nscHippiSonetFramer OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.5.2.2 |
nscHippiSonetFramerStatusFramer status register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.2.1 |
nscHippiSonetFramerAdaptIDAdaptor ID (HDA) and enable status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.2.2 |
nscHippiSonetFramerInputFramer input register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.2.3 |
nscHippiSonetFramerDataFramer data register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.2.4 |
nscHippiSonetFramerIFieldFramer I-Field register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.2.5 |
nscHippiSonetMegaFifo OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.5.2.3 |
nscHippiSonetMFcontrolMega FIFO control register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.3.1 |
nscHippiSonetMFstatusMega FIFO status register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.3.2 |
nscHippiSonetMFtimeoutMega FIFO timeout register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.3.3 |
nscHippiSonetMFConnectStatusMega FIFO connection status register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.2.3.4 |
nscHippiSonetMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.5.3 |
nscHippiSonetMonClock500 Khz clock value (for time stamps).ro INTEGER .1.3.6.1.4.1.10.2.1.5.3.1 |
nscHippiSonetMonMFFlowControlMega FIFO flow control duration.ro INTEGER .1.3.6.1.4.1.10.2.1.5.3.2 |
nscHippiSonetMonDLFlowControlDown line flow control durationro INTEGER .1.3.6.1.4.1.10.2.1.5.3.3 |
nscHippiSonetMonBIPErrorsReceived path BIP Errors.ro INTEGER .1.3.6.1.4.1.10.2.1.5.3.4 |
nscHippiSonetMonSrcBusyDuration in 500Khz that the source was busy.ro INTEGER .1.3.6.1.4.1.10.2.1.5.3.5 |
nscHippiSonetMonSrcSOCNumber of source start of connectionsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.6 |
nscHippiSonetMonSrcEOCNumber of source end of connectionsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.7 |
nscHippiSonetMonDstConnectDurationNumber 500Khz cycles destination has been connectedro INTEGER .1.3.6.1.4.1.10.2.1.5.3.8 |
nscHippiSonetMonSrcConnectDurationNumber 500Khz cycles source has been connectedro INTEGER .1.3.6.1.4.1.10.2.1.5.3.9 |
nscHippiSonetMonDstConnectRejectNumber of Destination connect rejects.ro INTEGER .1.3.6.1.4.1.10.2.1.5.3.10 |
nscHippiSonetMonSrcConnectFailNumber of source connect failures.ro INTEGER .1.3.6.1.4.1.10.2.1.5.3.11 |
nscHippiSonetMonLOFNumber of receive sonet Loss of Frame eventsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.12 |
nscHippiSonetMonLOSNumber of receive sonet Loss of Signal eventsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.13 |
nscHippiSonetMonDstBurstsNumber of Destination burstsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.14 |
nscHippiSonetMonDstPacketsNumber of Destination packetsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.15 |
nscHippiSonetMonDstSyncNumber of Destination sync errorsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.16 |
nscHippiSonetMonDstLLRCNumber of Destination LLRC errorsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.17 |
nscHippiSonetMonDstPENumber of Destination Parity Errorsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.18 |
nscHippiSonetMonDstConnectNumber of Destination connectsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.19 |
nscHippiSonetMonSrcConnectNumber of source connectsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.20 |
nscHippiSonetMonSrcPacketsNumber of source packetsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.21 |
nscHippiSonetMonSrcBurstsNumber of source burstsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.22 |
nscHippiSonetMonSrcForceErrorsNumber of Source Bad-data Force Errorsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.23 |
nscHippiSonetMonSrcCRCNumber of Source CRC errorsro INTEGER .1.3.6.1.4.1.10.2.1.5.3.24 |
nscHippiSonetMonDstWordsNumber of Destination burst words / 32 (Kbits)ro INTEGER .1.3.6.1.4.1.10.2.1.5.3.25 |
nscHippiSonetMonSrcWordsNumber of Destination burst words / 32 (Kbits)ro INTEGER .1.3.6.1.4.1.10.2.1.5.3.26 |
nscHippiSonetAtoD OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.5.4 |
nscHippiSonetADRecvOpticalPowerReceive optical power in dbm'sro INTEGER .1.3.6.1.4.1.10.2.1.5.4.1 |
nscHippiSonetADLaserBiasLaser bias voltage (in milli-volts)ro INTEGER .1.3.6.1.4.1.10.2.1.5.4.2 |
nscHippiSonetADLaserBackfaceLaser backface voltage (in milli-volts)ro INTEGER .1.3.6.1.4.1.10.2.1.5.4.3 |
nscHippiSonetADInternalTempInternal temperature (degrees F)ro INTEGER .1.3.6.1.4.1.10.2.1.5.4.4 |
nscHippiSonetADExhaustTempExhaust temperature (degrees F)ro INTEGER .1.3.6.1.4.1.10.2.1.5.4.5 |
nscHippiSonetSourceIFieldHippi source I-Field register.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.5 |
nscHippiSonetProfile OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.5.6 |
nscHippiSonetOpticalRcvOffsetString representation of the floating value for
the offset of the optical receive light formula.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.6.1 |
nscHippiSonetOpticalRcvSlopeString representation of the floating value for
the slope of the optical receive light formula.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.6.2 |
nscHippiSonetBiasCurrentInteger representation of the floating value for
the baseline current of the transmit laser in
milliamps. This value is used by the machine to
determine the life of the laser.ro INTEGER .1.3.6.1.4.1.10.2.1.5.6.3 |
nscHippiSonetBiasTempTemperature in celcius at which the profiled
bias current was taken. This value is used with
the bias current to determine the life of the laser.ro INTEGER .1.3.6.1.4.1.10.2.1.5.6.4 |
nscHippiSonetBackfaceVoltageString representation of the floting value of the
Voltage in millivolts that was measured at the
backface of the laser when it was new. This value
is used with the current backface voltage as an
additional method of determining if the transmit
laser has become defective.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.5.6.5 |
nscHippiSonetIFieldThe I-Field address that is used by the hippi
interface.rw INTEGER .1.3.6.1.4.1.10.2.1.5.6.6 |
nscHippiSonetBootPortWhich rs232 port the boot information should be sent
to. Ports 1 & 2 are the only valid ports with 1 being
located on the back of the machine and 2 on the front.rw INTEGER .1.3.6.1.4.1.10.2.1.5.6.7 |
nscHippiSonetPortSpeedThe baud rate to set the rs232 ports to at boot time.rw INTEGER .1.3.6.1.4.1.10.2.1.5.6.8 |
nscHippiSonetThresholdThreshold of the mega-fifo at which flow control will
be activated. The value represents 8ths of the fifo
with 7 representing the fifo must be full before flow
control is activated and 0 indicating that flow control
will happen as soon as the mega-fifo starts to fill.
This value may need to be adjusted to deal with time
delays over vary long sonet links in that you want flow
control to propagate back to the transmitting sonet box
before it puts enough information on the line to
overflow this machine.rw INTEGER .1.3.6.1.4.1.10.2.1.5.6.9 |
nscHippiTimeoutTimeout value to use when trying to connect from our
hippi source. This timer is started when the source
raises connect. If the destination fails to respond
before the timer goes off, the connect will be aborted.
The timer is represented as the number of 500 KHz
clock ticks.rw INTEGER (1..'7fff'h) .1.3.6.1.4.1.10.2.1.5.6.10 |
nscHippiSonetDipSwitchThis is a software switch that functions much like
a hardware dip switch. At the moment, the only use
of this switch is to define whether the unit will
act as the master clock for the sonet line. The
bit values are defined as follows:
x x x x x x 1 - assert master clock
x x x x x 1 x - not assigned
x x x x 1 x x - not assigned
x x x 1 x x x - not assigned
x x 1 x x x x - not assigned
x 1 x x x x x - not assigned
1 x x x x x x - not assignedrw INTEGER .1.3.6.1.4.1.10.2.1.5.6.11 |