NSCPS32-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
77
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
77 total| Object Name |
|---|
nscHippiSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.4 |
ps32General OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.4.1 |
ps32SwitchDescrA description of the NSC HIPPI switch.ro DisplayString .1.3.6.1.4.1.10.2.1.4.1.1 |
ps32SwitchVersionA textual description of the version/revision
level for the switch's software.ro DisplayString .1.3.6.1.4.1.10.2.1.4.1.2 |
ps32SwitchDateThe current date as kept in the real time clock
in the NVRAM chip on the switch board.rw DisplayString .1.3.6.1.4.1.10.2.1.4.1.3 |
ps32SwitchTimeThe current date as kept in the real time clock
in the NVRAM chip on the switch board.rw DisplayString .1.3.6.1.4.1.10.2.1.4.1.4 |
ps32SwitchAdminStatusProvides the administratively desired state of
the NSC Hippi Switch.
The switch is activated by writing a value of
enable(2).
The switch may be de-activated by writing a value
of disable(3). The switch is available for
subsequent activation.
Writing a value of reset(4) specifies the switch
should initiate a reset sequence.
Writing a value of programload(5) specifies the
switch should initiate a program load sequence.
Writing a value of test(6) specifies the switch
should initiate a testing sequence.rw Enumeration .1.3.6.1.4.1.10.2.1.4.1.5 |
ps32SwitchOperStatusProvides operational status of the switch. The
following are possible definitions of the values.
The exact definition of the values is
implementation specific. A value of other(1)
implies some undetermined state, possibly as a
result of setting ps32SwitchAdminStatus to a value
of disable(3). A value of invalid(2) could have
the possible meaning that the agent has no direct
control of the switch. A value of testing(3) may
be a diagnostic state. A value of operational(4)
implies that the switch is running with no errors
or warnings.
State resetInProgress(5) implies equivalent of
setting ps32SwitchAdminStatus to reset(4). The
states of warning(6), nonFatalError(7),
fatalError(8) reflect conditions detected during
operation. The switch may or may not be still
functional. State loading(10) is a result of
asserting programload(5) in ps32SwitchAdminStatus.ro Enumeration .1.3.6.1.4.1.10.2.1.4.1.6 |
ps32SwitchPhysicalChangesThe number of physical changes that have occurred
in the chassis since the agent was warm/cold
started. This includes additions and removal of
modules and entities. Other uses are
implementation specific.ro Counter .1.3.6.1.4.1.10.2.1.4.1.7 |
ps32SwitchDiagnosticRegThe register on the NSC Hippi Switch Control Board
that contains many items of information on the
configuration and performance of the switch.ro DisplayString .1.3.6.1.4.1.10.2.1.4.1.8 |
ps32SwitchMiscellanRegThe register on the NSC Hippi Switch Control Board
that contains many items of miscellaneous data with
respect to the switch.ro DisplayString .1.3.6.1.4.1.10.2.1.4.1.9 |
ps32SwitchDipSwitchRegThe register on the NSC Hippi Switch Control Board
that contains the dip switch settings and other
sensory information.ro DisplayString .1.3.6.1.4.1.10.2.1.4.1.10 |
ps32PowerSupply OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.4.2 |
ps32NumPowerSuppliesNumber of power supplies installed in this chassis.ro INTEGER .1.3.6.1.4.1.10.2.1.4.2.1 |
ps32PowerSupplyTableA list of power supply entries, one for each
power supply in the NSC Hippi Switch. SEQUENCE OF PS32PowerSupplyEntry .1.3.6.1.4.1.10.2.1.4.2.2 |
ps32PowerSupplyEntryValues for a power supply. PS32PowerSupplyEntry .1.3.6.1.4.1.10.2.1.4.2.2.1 |
ps32PowerSupplyIndexAn index value that uniquely identifies a power
supply installed in the NSC Hippi Switch.ro INTEGER .1.3.6.1.4.1.10.2.1.4.2.2.1.1 |
ps32PowerSupplyDescrA textual description of the power supply,
including the vendor's name and version.ro DisplayString .1.3.6.1.4.1.10.2.1.4.2.2.1.2 |
ps32PowerSupplyAdminStatusDesired status of the power supply.rw Enumeration .1.3.6.1.4.1.10.2.1.4.2.2.1.3 |
ps32PowerSupplyOperStatusActual status of the power supply:
- unknown(1) - status not known.
- empty(2) - no power supply installed in slot
- disabled(3) - unable to supply power - control
register has requested this supply be disabled.
- bad(4) - unable to supply power due to failure
- warning(5) - supplying power but an output or
sensor is bad or warning
- standby(6) - believed usable but not supplying
power
- engaged(7) - supplying power
- redundant(8) - supplying power but not needed
It is an implementation specific matter whether
the agent keeps entries with status unknown(1) or
empty(2) in the table.ro Enumeration .1.3.6.1.4.1.10.2.1.4.2.2.1.4 |
ps32PowerSupplyHealthTextA textual description of the power supply's
operational status. Agents may use this string to
provide detailed information on current failures,
including how they were detected, and/or
instructions for problem resolution. The contents
are agent-specific.ro DisplayString .1.3.6.1.4.1.10.2.1.4.2.2.1.5 |
ps32PowerSupplyWarningsThe number of times ps32PowerSupplyOperStatus has
gone to warning(5).ro Counter .1.3.6.1.4.1.10.2.1.4.2.2.1.6 |
ps32PowerSupplyFailuresThe number of times ps32PowerSupplyOperStatus has
gone to bad(4).ro Counter .1.3.6.1.4.1.10.2.1.4.2.2.1.7 |
ps32NumPowerOutputsNumber of power supply outputs (total) in the switch.ro INTEGER .1.3.6.1.4.1.10.2.1.4.2.3 |
ps32PowerOutputTableA list of power supply output entries, one for
each output of each power supply in the chassis. SEQUENCE OF PS32PowerOutputEntry .1.3.6.1.4.1.10.2.1.4.2.4 |
ps32PowerOutputEntryValues for a power supply output. PS32PowerOutputEntry .1.3.6.1.4.1.10.2.1.4.2.4.1 |
ps32PowerOutputIndexAn index value that uniquely identifies an output
for the power supply.ro INTEGER .1.3.6.1.4.1.10.2.1.4.2.4.1.1 |
ps32PowerOutputStatusActual status of the power supply:
- unknown(1) status not known
- bad(2) unable to supply power due to
failure
- warning(3) supplying power but marginally
- good(4) supplying power
It is an implementation specific matter whether
the agent keeps entries with status unknown(1) in
the table. If unknown(1), offered values and
counters are meaningless.ro Enumeration .1.3.6.1.4.1.10.2.1.4.2.4.1.2 |
ps32PowerOutputNominalVoltageIn hundredths of a volt, the voltage
the output is supposed to supply, such
as -5, +5, +12, -15, etc.ro INTEGER -- Gauge is unsigned integer .1.3.6.1.4.1.10.2.1.4.2.4.1.3 |
ps32PowerOutputOfferedVoltageIn hundredths of a volt, the voltage
actually supplied by the power output.ro INTEGER .1.3.6.1.4.1.10.2.1.4.2.4.1.4 |
ps32PowerOutputWarningsThe number of times ps32PowerOutputStatus has
gone to warning(3).ro Counter .1.3.6.1.4.1.10.2.1.4.2.4.1.5 |
ps32PowerOutputFailuresThe number of times ps32PowerOutputStatus has
gone to bad(2).ro Counter .1.3.6.1.4.1.10.2.1.4.2.4.1.6 |
ps32Environ OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.4.3 |
ps32NumEnvironmentSensorsNumber of environment sensors in this chassis.ro INTEGER .1.3.6.1.4.1.10.2.1.4.3.1 |
ps32EnvironTableA list of environmental entries, one for
each environmental sensor in the chassis. SEQUENCE OF PS32EnvironEntry .1.3.6.1.4.1.10.2.1.4.3.2 |
ps32EnvironEntryValues for an environmental sensor. PS32EnvironEntry .1.3.6.1.4.1.10.2.1.4.3.2.1 |
ps32EnvironIndexIndex added to get draft past the MIB
compiler. This needs to be fixed by the
working group.ro INTEGER .1.3.6.1.4.1.10.2.1.4.3.2.1.1 |
ps32EnvironSensorThe identification of an environmental
sensor. Other AutonomousType values may be
defined elsewhere, in association with
specific protocols. However, this document
assigns those of known interest as of this
writing.ro Enumeration .1.3.6.1.4.1.10.2.1.4.3.2.1.2 |
ps32EnvironStatusActual status indicated by the sensor. It is
an implementation specific matter whether the
agent keeps entries with status unknown(1) in
the table. If unknown(1), counters are
meaningless.ro Enumeration .1.3.6.1.4.1.10.2.1.4.3.2.1.3 |
ps32EnvironWarningsThe number of times ps32EnvironStatus has gone
to warning(3).ro Counter .1.3.6.1.4.1.10.2.1.4.3.2.1.4 |
ps32EnvironFailuresThe number of times ps32EnvironStatus has gone
to bad(2).ro Counter .1.3.6.1.4.1.10.2.1.4.3.2.1.5 |
ps32EnvironDescriptorA textual description of the environment sensor.ro DisplayString .1.3.6.1.4.1.10.2.1.4.3.2.1.6 |
ps32EnvironHealthTextA textual description of the current status of the
environment entity monitored by this sensor.ro DisplayString .1.3.6.1.4.1.10.2.1.4.3.2.1.7 |
ps32Slot OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.4.4 |
ps32NumSlotsNumber of slots in this chassis.ro INTEGER .1.3.6.1.4.1.10.2.1.4.4.1 |
ps32SlotTableA densely populated table that can be used to
access individual slots in a HIPPI switch. SEQUENCE OF PS32SlotEntry .1.3.6.1.4.1.10.2.1.4.4.2 |
ps32SlotEntryAn individual hippi switch slot entry consisting
of all information required to monitor the status
of a given slot in the Hippi Switch. PS32SlotEntry .1.3.6.1.4.1.10.2.1.4.4.2.1 |
ps32SlotNumberThe slot number in the switch. Slot numbers are
officially designated as 0 through 18 in the switch
but each slot number is incremented in order to
comply with SNMP standards.ro INTEGER .1.3.6.1.4.1.10.2.1.4.4.2.1.1 |
ps32SlotPartNumberThe part number of the board residing in the slot.ro DisplayString .1.3.6.1.4.1.10.2.1.4.4.2.1.2 |
ps32SlotBoardIDThe identifier of the board residing in the slot.ro DisplayString .1.3.6.1.4.1.10.2.1.4.4.2.1.3 |
ps32SlotBoardTextA textual description of the board residing in
the slot.ro DisplayString .1.3.6.1.4.1.10.2.1.4.4.2.1.4 |
ps32SlotLastChangeThe value of MIB-II's sysUpTime (in the agent
supporting this chassis MIB) at which a module was
last inserted or removed from this slot. If no
module has been inserted or removed from this slot
since the last time the network management system
was last re-initialized, then this object has a
zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.10.2.1.4.4.2.1.5 |
ps32Port OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.4.5 |
ps32MaximumPortsMaximum number of ports in this chassis.ro INTEGER .1.3.6.1.4.1.10.2.1.4.5.1 |
ps32InstalledPortsNumber of ports actually installed in this chassis.ro INTEGER .1.3.6.1.4.1.10.2.1.4.5.2 |
ps32PortTableA densely populated table that can be used to
access individual ports in a HIPPI switch. SEQUENCE OF PS32PortEntry .1.3.6.1.4.1.10.2.1.4.5.3 |
ps32PortEntryAn individual hippi switch port entry. A switch
port contains input and output hippi device pointers. PS32PortEntry .1.3.6.1.4.1.10.2.1.4.5.3.1 |
ps32PortNumberThe number of the hippi port.ro INTEGER .1.3.6.1.4.1.10.2.1.4.5.3.1.1 |
ps32PortBoardThe object identifier points to the PS32SlotEntry
for the board to allow users to locate information
about the board this port is located on.ro OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.4.5.3.1.2 |
ps32PortInputThe object identifier points to the hippiEntry
for the HIPPI input device associated with this
port.ro OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.4.5.3.1.3 |
ps32PortOutputThe object identifier points to the hippiEntry
for the HIPPI output device associated with this
port.ro OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.4.5.3.1.4 |
ps32PortForceThis object displays the forced pathway that is
associated with this port. If none is assigned
then the object has the value of -1. Only one
output port is allowed for any particular input
port.rw INTEGER .1.3.6.1.4.1.10.2.1.4.5.3.1.5 |
ps32PortCounterStatusThis object consists of a bit for each counter that
may have been overrun.rw INTEGER .1.3.6.1.4.1.10.2.1.4.5.3.1.6 |
ps32PortOverrunCountThis object counts the overruns detected for this
HIPPI port.rw INTEGER .1.3.6.1.4.1.10.2.1.4.5.3.1.7 |
ps32PortSwitchRejectCountThis object consists of a bit for each counter that
may have been overrun.rw INTEGER .1.3.6.1.4.1.10.2.1.4.5.3.1.8 |
ps32PortCamponDelayCountThis object counts the rejected connect attempts
using the Campon option.rw INTEGER .1.3.6.1.4.1.10.2.1.4.5.3.1.9 |
ps32PortCurrentStatusThis object consists of the status register at the
instant of the last successful connection.ro DisplayString .1.3.6.1.4.1.10.2.1.4.5.3.1.10 |
ps32PortAdminStatusThis object allows various commands to be issued
from the client and acted upon by the agent. The
only commands supported currently are listed below.
1: unknown...not a supported command.
2: enable activate the port requested.
3: disable deactivate the port requested.
4: reset reset the port requested.
5: test run BIST upon the requested port.
6: clrerrors clear current port errors.
7: clrpaths clear the pathways assigned.
8: clrstats clear the port's statistics.
9: clrall clear errors, stats, and paths.
10: rstrpath restore all pathways for this port.
11: savepath save all pathways for this port.
12: savecfg save the configuration.
These commands completely fulfill the actions that
a client is allowed to demand from a port.rw Enumeration .1.3.6.1.4.1.10.2.1.4.5.3.1.11 |
ps32PortOperStatusThis object displays the actual status of the port
as determined by current registers and other indi-
cators.
1: unknown not a supported status.
2: notinstalled Port is not in the switch.
3: disabled Port is deactivated.
4: operational Port is running normally.
5: connected Port has source interconnect.
6: intest Port is in BIST operation.
7: inerror Port is in an error condition.
These statuses completely indicate the possible
conditions that a port may be experiencing.ro Enumeration .1.3.6.1.4.1.10.2.1.4.5.3.1.12 |
ps32Pathway OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.4.6 |
ps32MaximumPathwaysMaximum number of pathways for a single port.ro INTEGER .1.3.6.1.4.1.10.2.1.4.6.1 |
ps32PathwayTableA sparsely populated table that can be used to
determine pathway information for a given port. SEQUENCE OF PS32PathwayEntry .1.3.6.1.4.1.10.2.1.4.6.2 |
ps32PathwayEntryAn individual hippi switch pathway entry. PS32PathwayEntry .1.3.6.1.4.1.10.2.1.4.6.2.1 |
ps32PathwayPortNumberIndex into the pathway entry table.ro INTEGER .1.3.6.1.4.1.10.2.1.4.6.2.1.1 |
ps32PathwayHDAThe downline HIPPI Destination Address to which
the HIPPI connection is routed. This address is
a 3 character hexadecimal address, packed into
two octets.ro PhysAddress .1.3.6.1.4.1.10.2.1.4.6.2.1.2 |
ps32PathwayDestThis is a list of output port numbers that can
supply a path or a portion of the path to the
specified HDA. The number of output ports and
the number of ports that can be defined are switch
specific. ie: the PS32 can accept up to four
output ports with values of 0 to 31.
The port list contains decimal numbers and are
separated by spaces. Specifying a new string
replaces any previous definitions including a
NULL string removing all definitions.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10.2.1.4.6.2.1.3 |
ps32PathwayClearA command to clear the requested pathway entry.
The value is not used. Any access of this function
causes the pathway indicated by the indices to be
cleared.rw INTEGER .1.3.6.1.4.1.10.2.1.4.6.2.1.4 |