NSCDXGLIP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for NSCDXGLIP-MIB.
173
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
173 total| Object Name |
|---|
nscDxGreenline OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.3.4 |
nscDxGlChannelTableList of channel interface entries. SEQUENCE OF NscDxGlChannelEntry .1.3.6.1.4.1.10.2.1.3.4.1 |
nscDxGlChannelEntryChannel interface entry. NscDxGlChannelEntry .1.3.6.1.4.1.10.2.1.3.4.1.1 |
nscDxGlChanEntKeyIdProcessor Key ID (KID). This is a unique
value for each interface.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.1.1.1 |
nscDxGlChanEntTypeChannel interface type.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.1.1.2 |
nscDxGlChanEntActivityStateThis is the actual state of the HCI (which depends on the
IP state and online/offline state of the HCI).ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.1.1.3 |
nscDxGlChanEntResetStateThis identifies the pending channel reset to process.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.1.1.4 |
nscDxGlChanEntIplStateThis is the state prior to the first command chain being
completed. It is used for IPL.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.1.1.5 |
nscDxGlChanEntIpStateThis indicates whether the interface has been set online by
the coprocessor. It indicates whether a Start I/F has been
sent by the coprocessor.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.1.1.6 |
nscDxGlChanEntOnlineOfflineStateThis indicates the state of the switch on the back of the
HCI.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.1.1.7 |
nscDxGlChanEntPollingFor a bus-tag-hci type channel this indicates whether the
HCI will request polling on the RCIs that it connects to. For
a bus-tag-rci type channel this indicates whether the RCI will
allow polling on its channel interface.rw Enumeration .1.3.6.1.4.1.10.2.1.3.4.1.1.8 |
nscDxGlChanEntActiveSubchannelThe HCI device address of the active device.ro INTEGER (0..'FF'h) .1.3.6.1.4.1.10.2.1.3.4.1.1.9 |
nscDxGlChanEntMemoryResourcesLimitedIndicator of memory resource limitation.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.1.1.10 |
nscDxGlChanEntTagOverrunsNumber of channel overruns.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.11 |
nscDxGlChanEntDcOverrunsNumber of channel overruns in DC interlock mode.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.12 |
nscDxGlChanEntDsOverrunsNumber of channel overruns in data streaming mode.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.13 |
nscDxGlChanEntDmaParityErrorsNumber of DMA parity errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.14 |
nscDxGlChanEntCrcErrorsNumber of CRC errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.15 |
nscDxGlChanEntResetsDuringDmaNumber of times the DMA operation has been
terminated by channel resets (selective reset,
interface reconnect, system reset).ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.16 |
nscDxGlChanEntCmdParityErrorsNumber of channel command parity errors
(a Bus parity error with Command Out active).ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.17 |
nscDxGlChanEntUnsupportedStatusesNumber of unsupported status errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.18 |
nscDxGlChanEntMiscompareParityErrorsNumber of miscompare parity errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.19 |
nscDxGlChanEntSelectionTimeoutsNumber of selection timeouts.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.20 |
nscDxGlChanEntStatusAcceptDiscInsNumber of status accept disconnect in errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.21 |
nscDxGlChanEntStatusAcceptTimeoutsNumber of status accept timeouts.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.22 |
nscDxGlChanEntStatusWaitDiscInsNumber of status wait disconnect in errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.23 |
nscDxGlChanEntStatusWaitTimeoutsNumber of status wait timeouts.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.24 |
nscDxGlChanEntOpInActiveTimeoutsNumber of op inactive timeouts.ro Counter .1.3.6.1.4.1.10.2.1.3.4.1.1.25 |
nscDxGlChanEntNumCusNumber of control units per interface.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.1.1.26 |
nscDxGlChanEntChannelStatusThe status of the channel interface.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.1.1.27 |
nscDxGlProfiles OBJECT IDENTIFIER .1.3.6.1.4.1.10.2.1.3.4.2 |
nscDxGlProfControlUnitTableList of Control Unit entries. SEQUENCE OF NscDxGlProfControlUnitEntry .1.3.6.1.4.1.10.2.1.3.4.2.1 |
nscDxGlProfControlUnitEntryControl Unit entry. This entry defines controller and
device operating characteristics. Some of the
characteristics are: the address ranges the HCI responds to,
the type of devices that are supported, and the operational
condition of the HCI interface device. NscDxGlProfControlUnitEntry .1.3.6.1.4.1.10.2.1.3.4.2.1.1 |
nscDxGlProfCuEntKeyIdProcessor Key ID (KID). This is a unique
value for each interface.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.2.1.1.1 |
nscDxGlProfCuEntCuNumThe profile number of the controller. The HCI supports up
to 16 controller definitions (a unique set of operating and
address characteristics for a type of device). The
controller establishes the operation conditions of a device.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.2.1.1.2 |
nscDxGlProfCuEntNumDevicesNumber of devices on this control unit.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.2.1.1.3 |
nscDxGlProfCuEntOnlineOfflineStateThe profiled state of the device(s).rw Enumeration .1.3.6.1.4.1.10.2.1.3.4.2.1.1.4 |
nscDxGlProfCuEntDeviceTypeThe type of device associated with the controller
function. The controller uses a specific CCW table
tailored for the unique operating characteristics
of that particular device. It allows the controller
to reference a table identifying the unique operating
characteristics of that particular device type.rw DisplayString .1.3.6.1.4.1.10.2.1.3.4.2.1.1.5 |
nscDxGlProfCuEntHostStartingDevAddrThe first HCI device address in the range of addresses
associated with the specified controller definition.rw INTEGER .1.3.6.1.4.1.10.2.1.3.4.2.1.1.6 |
nscDxGlProfCuEntHostEndingDevAddrThe last HCI device address in the range of addresses
associated with the specified controller definition.
NOTE: This is used in conjunction with the
nscDxGlProfCuEntHostStartingDevAddr variable. The total
number of device addresses in range is bounded by the
nscDxGlProfCuEntHostStartingDevAddr and
nscDxGlProfCuEntHostEndingDevAddr values for the specified
controller definition.rw INTEGER .1.3.6.1.4.1.10.2.1.3.4.2.1.1.7 |
nscDxGlProfCuEntHostChannelSpeedThe HCI channel speed to the host. This defines to the HCI
the data transfer protocol and data transfer rate used for the
specified controller definition.rw Enumeration .1.3.6.1.4.1.10.2.1.3.4.2.1.1.8 |
nscDxGlProfCuEntHostBufferRequirementsThe number of data buffers the HCI will allocate for
a write I/O command.rw INTEGER .1.3.6.1.4.1.10.2.1.3.4.2.1.1.9 |
nscDxGlProfCuEntRmtIpAddrThe IP address of the remote interface, either an RCI where
devices are attached, or an HCI for CTC.rw IpAddress .1.3.6.1.4.1.10.2.1.3.4.2.1.1.10 |
nscDxGlProfCuEntRmtStartingDevAddrThe first remote device address in the range of addresses
associated with the specified controller definition.
This can be used only to map addresses recognized by the
host to different addresses at the device. If address
mapping is not used, nscDxGlProfCuEntRmtStartingDevAddr should
be the same as nscDxGlProfCuEntHostStartingDevAddr.rw INTEGER .1.3.6.1.4.1.10.2.1.3.4.2.1.1.11 |
nscDxGlProfCuEntRmtBufferHoldThis indicates whether an RCI should wait for all the
data associated with a CCW to be received before starting
the device. Each device-type CCW table assigns this
attribute to the appropriate CCW's for that device. It is
generally enabled for overrunable devices.rw Enumeration .1.3.6.1.4.1.10.2.1.3.4.2.1.1.12 |
nscDxGlProfCuEntRmtChannelSpeedThe remote channel speed to the device. This defines to the
remote interface what data transfer protocol and data transfer
rate should be used for the specified devices.rw Enumeration .1.3.6.1.4.1.10.2.1.3.4.2.1.1.13 |
nscDxGlProfCuEntRmtBufferRequirementsThe number of data buffers an RCI will allocate for read
I/O commands.rw INTEGER .1.3.6.1.4.1.10.2.1.3.4.2.1.1.14 |
nscDxGlProfCuEntUnsolStatusOptionThis variable profiles the HCI to handle unsolicited
status. When unsolicited status is received by the HCI from
an RCI, the status is queued for presentation to the
channel, except if the device is busy. If the device is
busy, the status is handled in one of the following ways,
depending upon which option has been defined.
discard - profiles the HCI to discard the unsolicited
status
q-non-uc - profiles the HCI to always queue the
unsolicited status
q-uc - profiles the HCI to queue the unsolicited
status only if it contains Unit Check statusrw Enumeration .1.3.6.1.4.1.10.2.1.3.4.2.1.1.15 |
nscDxGlProfCuEntDevDriverOptionsThe device driver options. See the 7220/7256 Host &
Remote Channel Interfaces (HCI & RCI) with Greenline-IP
software (GLH-IP/GLD-IP) reference manual (460793).
The value depends on the device driver in use.rw INTEGER .1.3.6.1.4.1.10.2.1.3.4.2.1.1.16 |
nscDxGlProfCuEntHostBufferHoldThis indicates whether the HCI should wait for all of the
data associated with a CCW to be received before reconnecting
to the channel.rw Enumeration .1.3.6.1.4.1.10.2.1.3.4.2.1.1.17 |
nscDxGlProfCuEntWindowSizeThis variable specifies the number of IP packets that
transport will sent before it waits for an acknowledgement
to come back. The following value are allowed.
1 = 8 packets.
2 = 16 packets.
3 = 32 packets.
4 = 64 packets.
5 = 128 packets.
6 = 256 packets.
7 = 512 packets.rw INTEGER .1.3.6.1.4.1.10.2.1.3.4.2.1.1.18 |
nscDxGlProfDeviceTableList of Device entries. SEQUENCE OF NscDxGlProfDeviceEntry .1.3.6.1.4.1.10.2.1.3.4.2.2 |
nscDxGlProfDeviceEntryDevice entry. States whether device is profiled online or
offline. NscDxGlProfDeviceEntry .1.3.6.1.4.1.10.2.1.3.4.2.2.1 |
nscDxGlProfDevEntKeyIdProcessor Key ID (KID). This is a unique
value for each interface.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.2.2.1.1 |
nscDxGlProfDevEntDeviceStarting address of the device.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.2.2.1.2 |
nscDxGlProfDevEntOnOffProfile device online or offline.rw Enumeration .1.3.6.1.4.1.10.2.1.3.4.2.2.1.3 |
nscDxGlDevStatusTableList of Device Status entries. SEQUENCE OF NscDxGlDevStatusEntry .1.3.6.1.4.1.10.2.1.3.4.3 |
nscDxGlDevStatusEntryDevice status entry. NscDxGlDevStatusEntry .1.3.6.1.4.1.10.2.1.3.4.3.1 |
nscDxGlDevStatusEntKeyIdProcessor Key ID (KID). This is a unique
value for each interface.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.3.1.1 |
nscDxGlDevStatusEntDeviceNumThe device number.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.3.1.2 |
nscDxGlDevStatusEntHostDevAddrThe HCI device address.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.3.1.3 |
nscDxGlDevStatusEntRmtDevAddrThe remote device address.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.3.1.4 |
nscDxGlDevStatusEntOnOffStateSpecifies if the device is online, offline, or marked
offline.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.3.1.5 |
nscDxGlDevStatusEntReservedStateSpecifies if the device is reserved by this HCI.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.3.1.6 |
nscDxGlSesStatsTableList of Session statistics entries. SEQUENCE OF NscDxGlSesStatsEntry .1.3.6.1.4.1.10.2.1.3.4.4 |
nscDxGlSesStatsEntrySession statistics entry. NscDxGlSesStatsEntry .1.3.6.1.4.1.10.2.1.3.4.4.1 |
nscDxGlSesStatsEntKeyIdProcessor Key ID (KID). This is a unique
value for each interface.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.4.1.1 |
nscDxGlSesStatsEntInControlReqsThe number of control request packets received by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.2 |
nscDxGlSesStatsEntInControlRespsThe number of control response packets received by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.3 |
nscDxGlSesStatsEntInDevAvailRespsThe number of device available response packets received by
session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.4 |
nscDxGlSesStatsEntInDevStatRespsThe number of device status response packets received by
session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.5 |
nscDxGlSesStatsEntInInitReqsThe number of init request packets received by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.6 |
nscDxGlSesStatsEntInInitRespsThe number of init response packets received by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.7 |
nscDxGlSesStatsEntInReserveReqsThe number of reserve request packets received by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.8 |
nscDxGlSesStatsEntInReserveRespsThe number of reserve response packets received by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.9 |
nscDxGlSesStatsEntInSenseReqsThe number of sense request packets received by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.10 |
nscDxGlSesStatsEntInSenseRespsThe number of sense response packets received by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.11 |
nscDxGlSesStatsEntInUnreserveReqsThe number of unreserve request packets received by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.12 |
nscDxGlSesStatsEntInInvalidsThe number of invalid packets received by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.13 |
nscDxGlSesStatsEntOutControlReqsThe number of control request packets sent by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.14 |
nscDxGlSesStatsEntOutControlRespsThe number of control response packets sent by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.15 |
nscDxGlSesStatsEntOutDevAvailRespsThe number of device available response packets sent by
session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.16 |
nscDxGlSesStatsEntOutDevStatRespsThe number of device status response packets sent by
session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.17 |
nscDxGlSesStatsEntOutInitReqsThe number of init request packets sent by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.18 |
nscDxGlSesStatsEntOutInitRespsThe number of init response packets sent by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.19 |
nscDxGlSesStatsEntOutReserveReqsThe number of reserve request packets sent by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.20 |
nscDxGlSesStatsEntOutReserveRespsThe number of reserve response packets sent by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.21 |
nscDxGlSesStatsEntOutSenseReqsThe number of sense request packets sent by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.22 |
nscDxGlSesStatsEntOutSenseRespsThe number of sense response packets sent by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.23 |
nscDxGlSesStatsEntOutUnreserveReqsThe number of unreserve request packets sent by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.24 |
nscDxGlSesStatsEntOutInvalidsThe number of invalid packets sent by session.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.25 |
nscDxGlSesStatsEntHciStateThe state of the HCI.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.4.1.26 |
nscDxGlSesStatsEntRciStateThe state of the RCI.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.4.1.27 |
nscDxGlSesStatsEntHciMaxSessionsMaximum number of HCIs that can be connected to the RCI.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.4.1.28 |
nscDxGlSesStatsEntRciMaxSessionsMaximum number of remote interfaces that can be connected
to the HCI.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.4.1.29 |
nscDxGlSesStatsEntRciPollStatusThis indicates whether automatic device polling is active.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.4.1.30 |
nscDxGlSesStatsEntRciPollRequestsPoll request count.ro Counter .1.3.6.1.4.1.10.2.1.3.4.4.1.31 |
nscDxGlSesStatsEntRciPollDevicePoll device number.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.4.1.32 |
nscDxGlSesHciConnTableList of session connection entries. SEQUENCE OF NscDxGlSesHciConnEntry .1.3.6.1.4.1.10.2.1.3.4.5 |
nscDxGlSesHciConnEntrySession connection entry. NscDxGlSesHciConnEntry .1.3.6.1.4.1.10.2.1.3.4.5.1 |
nscDxGlSesHciConnEntKeyIdProcessor Key ID (KID). This is a unique
value for each interface.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.5.1.1 |
nscDxGlSesHciConnEntSesNumThe session number.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.5.1.2 |
nscDxGlSesHciConnEntIpAddressThe IP address of the remote RCI/HCI.ro IpAddress .1.3.6.1.4.1.10.2.1.3.4.5.1.3 |
nscDxGlSesHciConnEntStatusSession status. In normal operations it will be openro Enumeration .1.3.6.1.4.1.10.2.1.3.4.5.1.4 |
nscDxGlSesHciConnEntSendStateThe current state of the outbound data stream.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.5.1.5 |
nscDxGlSesHciConnEntRecvStateThe current state of the inbound data stream.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.5.1.6 |
nscDxGlSesHciConnEntAddrThe local address of the device currently receiving data
from the connected HCI.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.5.1.7 |
nscDxGlSesHciConnEntFlagsSession flag information. This is represented by an array
of flags, with each flag represented by one hex digit which
will have the value of one (on) or zero (off). The value
may have multiple flags set at the same time. The following
flags are currently in use.
10000000 - Polling has been requested by this HCI
1000000 - Reset has been sent
100000 - Session is congestedro INTEGER .1.3.6.1.4.1.10.2.1.3.4.5.1.8 |
nscDxGlSesHciConnEntReconnThe amount of time in seconds between reconnects. It is only
valid if status is closed.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.5.1.9 |
nscDxGlSesRciConnTableList of session connection entries. SEQUENCE OF NscDxGlSesRciConnEntry .1.3.6.1.4.1.10.2.1.3.4.6 |
nscDxGlSesRciConnEntrySession connection entry. NscDxGlSesRciConnEntry .1.3.6.1.4.1.10.2.1.3.4.6.1 |
nscDxGlSesRciConnEntKeyIdProcessor Key ID (KID). This is a unique
value for each interface.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.6.1.1 |
nscDxGlSesRciConnEntSesNumThe session number.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.6.1.2 |
nscDxGlSesRciConnEntIpAddressThe IP address of the remote HCI.ro IpAddress .1.3.6.1.4.1.10.2.1.3.4.6.1.3 |
nscDxGlSesRciConnEntStatusSession status. In normal operations it will be openro Enumeration .1.3.6.1.4.1.10.2.1.3.4.6.1.4 |
nscDxGlSesRciConnEntSendStateThe current state of the outbound data stream.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.6.1.5 |
nscDxGlSesRciConnEntRecvStateThe current state of the inbound data stream.ro Enumeration .1.3.6.1.4.1.10.2.1.3.4.6.1.6 |
nscDxGlSesRciConnEntAddrThe local address of the device currently receiving data
from this RCI.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.6.1.7 |
nscDxGlSesRciConnEntFlagsSession flag information. This is represented by an array
of flags, with each flag represented by one hex digit which
will have the value of one (on) or zero (off). The value
may have multiple flags set at the same time. The following
flags are currently in use.
10000000 - Polling has been requested by remote HCI
1000000 - Reset has been sent
100000 - Session is congestedro INTEGER .1.3.6.1.4.1.10.2.1.3.4.6.1.8 |
nscDxGlSesDevTableList of session device entries. SEQUENCE OF NscDxGlSesDevEntry .1.3.6.1.4.1.10.2.1.3.4.7 |
nscDxGlSesDevEntrySession device entry. NscDxGlSesDevEntry .1.3.6.1.4.1.10.2.1.3.4.7.1 |
nscDxGlSesDevEntKeyIdProcessor Key ID (KID). This is a unique
value for each interface.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.7.1.1 |
nscDxGlSesDevEntDeviceThe device address.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.7.1.2 |
nscDxGlSesDevEntReserveThe session number of the HCI that has reserved the device.
This value will -1 if the device is not currently reserved.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.7.1.3 |
nscDxGlSesDevEntPrimedBit map with each bit representing an HCI that is waiting
for the device to become unreserved. The right most bit
corresponds to HCI 0.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.7.1.4 |
nscDxGlSesDevEntStatThe status of the device, as given in the following:
0x80 - device is offline
0x40 - device in online but does not respond
0-7 - number of sense bytesro INTEGER .1.3.6.1.4.1.10.2.1.3.4.7.1.5 |
nscDxGlSesDevEntSenseDataThe sense bytes.ro OCTET STRING .1.3.6.1.4.1.10.2.1.3.4.7.1.6 |
nscDxGlXportStatsTableList of transport statistics entries. SEQUENCE OF NscDxGlXportStatsEntry .1.3.6.1.4.1.10.2.1.3.4.8 |
nscDxGlXportStatsEntryTransport statistics entry. NscDxGlXportStatsEntry .1.3.6.1.4.1.10.2.1.3.4.8.1 |
nscDxGlXportStatsEntKeyIdProcessor Key ID (KID). This is a unique
value for each interface.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.8.1.1 |
nscDxGlXportStatsEntInAcksThe number of ack packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.2 |
nscDxGlXportStatsEntInConnectsThe number of connect packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.3 |
nscDxGlXportStatsEntInDataDupsThe number of data dup packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.4 |
nscDxGlXportStatsEntInDataInOrdersThe number of data in order packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.5 |
nscDxGlXportStatsEntInDataInvalidsThe number of data invalid packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.6 |
nscDxGlXportStatsEntInDataInWindowsThe number of data in window packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.7 |
nscDxGlXportStatsEntInDiscsThe number of disconnect packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.8 |
nscDxGlXportStatsEntInNacksThe number of nack packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.9 |
nscDxGlXportStatsEntInProbesThe number of probe packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.10 |
nscDxGlXportStatsEntInProbeRespsThe number of probe response packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.11 |
nscDxGlXportStatsEntBadPcktsThe number of bad packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.12 |
nscDxGlXportStatsEntBadXcbsThe number of bad xcb packets received by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.13 |
nscDxGlXportStatsEntOutAcksThe number of ack packets sent by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.14 |
nscDxGlXportStatsEntOutConnectsThe number of connect packets sent by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.15 |
nscDxGlXportStatsEntOutDatasThe number of data packets sent by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.16 |
nscDxGlXportStatsEntOutDiscsThe number of disconnect packets sent by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.17 |
nscDxGlXportStatsEntOutNacksThe number of nack packets sent by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.18 |
nscDxGlXportStatsEntOutProbesThe number of probe packets sent by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.19 |
nscDxGlXportStatsEntOutProbeRespsThe number of probe response packets sent by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.20 |
nscDxGlXportStatsEntReconnsThe number of reconnect packets sent by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.21 |
nscDxGlXportStatsEntRetransmitsThe number of retransmit packets sent by transport.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.22 |
nscDxGlXportStatsEntBadChecksumsThe number of bad checksum errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.23 |
nscDxGlXportStatsEntBadVersionsThe number of bad version errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.24 |
nscDxGlXportStatsEntConnTimeoutsThe number of connect timeout errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.25 |
nscDxGlXportStatsEntInitXcbExistsThe number of xcb exists errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.26 |
nscDxGlXportStatsEntNoHdrSpacesThe number of no header space errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.27 |
nscDxGlXportStatsEntNoMemorysThe number of no memory errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.28 |
nscDxGlXportStatsEntNoPesThe number of no pe errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.29 |
nscDxGlXportStatsEntOutOfSeqDatasThe number of out of sequence data errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.30 |
nscDxGlXportStatsEntShortPacketsThe number of short packets errors.ro Counter .1.3.6.1.4.1.10.2.1.3.4.8.1.31 |
nscDxGlXportConnTableList of transport connection entries. SEQUENCE OF NscDxGlXportConnEntry .1.3.6.1.4.1.10.2.1.3.4.9 |
nscDxGlXportConnEntryTransport connection entry. NscDxGlXportConnEntry .1.3.6.1.4.1.10.2.1.3.4.9.1 |
nscDxGlXportConnEntKeyIdProcessor Key ID (KID). This is a unique
value for each interface.ro INTEGER (0..'F'h) .1.3.6.1.4.1.10.2.1.3.4.9.1.1 |
nscDxGlXportConnEntNumThe transport connection number.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.9.1.2 |
nscDxGlXportConnEntLocalAddressThe local IP address.ro IpAddress .1.3.6.1.4.1.10.2.1.3.4.9.1.3 |
nscDxGlXportConnEntLocalPortThe local transport port number.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.9.1.4 |
nscDxGlXportConnEntRemoteAddressThe remote IP address.ro IpAddress .1.3.6.1.4.1.10.2.1.3.4.9.1.5 |
nscDxGlXportConnEntRemotePortThe remote transport port number.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.9.1.6 |
nscDxGlXportConnEntXoptXport option information. This is represented by an array
of flags, with each flag represented by one hex digit which
will have the value of one (on) or zero (off). The value
may have multiple flags set at the same time. The following
flags are currently in use.
10000000 - Return data
1000000 - Fast searchro INTEGER .1.3.6.1.4.1.10.2.1.3.4.9.1.7 |
nscDxGlXportConnEntWindowSizeWindow size specified as a packet count, 8, 16, 32, 64,
128, or 256ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.9.1.8 |
nscDxGlXportConnEntRoundTripTimeRound trip time in milliseconds.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.9.1.9 |
nscDxGlXportConnEntSeqNumberSequence number.ro INTEGER .1.3.6.1.4.1.10.2.1.3.4.9.1.10 |
nscDxGlXportConnEntXcbFlagsXport flag information. This is represented by an array
of flags, with each flag represented by one hex digit which
will have the value of one (on) or zero (off). The value
may have multiple flags set at the same time. The following
flags are currently in use.
10000000 - Owed ack
1000000 - Owe ack
100000 - Owed probe
10000 - Congestedro INTEGER .1.3.6.1.4.1.10.2.1.3.4.9.1.11 |