NMS510-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for NMS510-MIB.
9
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
9 total| Object Name |
|---|
nms510 OBJECT IDENTIFIER .1.3.6.1.4.1.498.8.6 |
IMPORTS Unknown .1.3.6.1.4.1.498.8.6 |
nms510MIBversionIdentifies the version of the MIB. The format of the version
is x.yzT, where 'x' identifies the major revision number, 'y'
identifies the minor revision number, 'z' identifies the
typographical revision, and T identifies the test revision.
Acceptable values for the individual revision components are
as follows:
x: 1 - 9
y: 0 - 9
z: 0 - 9
T: A - Z
Upon formal release, no designation for the test revision will
be present.ro Unknown .1.3.6.1.4.1.498.8.6.1 |
nms510UnitCfgTableThe NMS510 Unit Configuration table. This table augments the
GDC SC5520 Unit Configuration table, providing unit level configuration
for each NMS510 device installed. For each entry in the GDC SC
Unit Configuration table that represents an NMS510, there is a
corresponding entry here whereby the value of the gdcSCunitCfgIndex
object is equivalent to the value of the nms510unitCfgIndex object. SEQUENCE OF Nms510UnitCfgEntry .1.3.6.1.4.1.498.8.6.2 |
nms510UnitCfgEntryThe NMS510 Unit Configuration table entry. The information in this
entry augments the information in the corresponding entry in the
GDC SC Unit Configuration table and provides unit level configuration
for the installed NMS510. Nms510UnitCfgEntry .1.3.6.1.4.1.498.8.6.2.1 |
nms510UnitCfgIndexThe index value which uniquely identifies the NMS510 to which
this entry is applicable. This has the form of a SCinstance
which defines the slot, line, and drop of the NMS510 with no
sub-identifier value.ro SCinstance .1.3.6.1.4.1.498.8.6.2.1.1 |
nms510DteCtsDelayRTS/CTS Delay options
ctsOn(1) Forces both RTS and CTS On regardless of the
state of the attached business equipment (the
transmitter is On regardless of the status of
the RTS interface lead). MIB object
nms510DteCtsDelayExt is ignored.
cts0mSec(2) Provides zero bits of delay between active
RTS and CTS being set to active. MIB object
nms510DteCtsDelayExt must be set to ext0mSec(1).
ctsFix3Char(3) Provides three character bits of delay between
active RTS and CTS being set to active. MIB
object nms510DteCtsDelayExt must be set to
ext0mSec(1).rw Enumeration .1.3.6.1.4.1.498.8.6.2.1.2 |
nms510DteCtsDelayExtRTS/CTS Delay options extension
ext0mSec(1) Used to enable options cts0mSec(2) or
ctsFix3Char(3) from MIB object
nms510DteCtsDelay.
ext30mSec(2) Provides 30 msec of delay between active
RTS and CTS being set to active. MIB object
nms510DteCtsDelay must be set for either
cts0mSec(2) or ctsFix3Char(3).
ext60mSec(3) Provides 60 msec of delay between active
RTS and CTS being set to active. MIB object
nms510DteCtsDelay must be set for either
cts0mSec(2) or ctsFix3Char(3).
ext90mSec(4) Provides 90 msec of delay between active
RTS and CTS being set to active. MIB object
nms510DteCtsDelay must be set for either
cts0mSec(2) or ctsFix3Char(3).rw Enumeration .1.3.6.1.4.1.498.8.6.2.1.3 |
nms510FirmwareLevelThe version number of the firmware, to allow products to know which
revision is installed. The released version number is sequenced from
::= { nms510UnitCfgEntry 4 }
nms510AlarmCfgCountWindow OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTIONro DisplayString .nms510DiagExcEntry.7 |