NMS-GPON-MIB
AI MIB Summary
The NMS-GPON-MIB module enables Network Management Systems to configure and monitor GPON profile parameters, including optical power thresholds, bandwidth profiles, and service flow attributes, across GPON OLT and ONU hardware. It facilitates the centralized management of subscriber service policies and physical layer performance metrics essential for maintaining GPON network integrity and service quality.
nmsGponProfile management group.
Main OID:
nmsGponMIB.1.3.6.1.4.1.231.7.1.3.10
284
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
284 total| Object Name |
|---|
nmsGponMIBnmsGponProfile management group. MODULE-IDENTITY .1.3.6.1.4.1.231.7.1.3.10 |
nmsGponOltObj OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.1 |
gponOltConfigTable OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.1.1 |
gponOltConfigEntry OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.1.1.1 |
gponOnuAuthenticationModeAuthentication method:1 Serial number only, 2 Serial number and password, 3 Disabled, so all ONU/ONTs
are allowed to be activated always. When this option is selected. Default value is 3.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.1.1.1.1 |
gponBroadcastGEMPortGEM port for incidental broadcast traffic. Set to 0, if no dedicated GEM port is needed for broadcast
traffic and broadcast traffic will be sent on unicast GEM ports.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.1.1.1.2 |
gponEncryptionGPON encryption switch.1-Enable 0-Disable. Default value is 0.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.1.1.1.3 |
gponKeyExchangeIntervalKey exchange interval in milliseconds.1-3600. Default value is 3600.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.1.1.1.4 |
nmsGponOltPonPortObj OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.2 |
gponOltPonPortConfigTablegpon Olt Pon Port Config table. SEQUENCE OF GponOltPonPortConfigEntry .1.3.6.1.4.1.231.7.1.3.10.2.1 |
gponOltPonPortConfigEntrygpon Olt Pon Port Config . GponOltPonPortConfigEntry .1.3.6.1.4.1.231.7.1.3.10.2.1.1 |
gponOltPonPortPortIndexIndex of the table, PON port INDEX.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.1.1.1 |
gponOltPonPortPortAdminStatus1-No shutdown 2-shutdown.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.1.1.2 |
gponOltPonPortOnuDiscoveryModeONU discovery mode: 1 Auto periodic (onuDiscoveryInterval is the period),2 Manual enabled once
then disabled, 3 Disabled,rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.1.1.3 |
gponOltPonPortPortActiveOnuNumONU count of this pon port which is in active status .ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.1.1.4 |
gponOltPonPortPortInactiveOnuNumONU count of this pon port which is in inactive status .ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.1.1.5 |
gponOltPonPortPortLlidIfIndexStringFor diID of this PON port is 32, 33, 34. This string should be writed as '32,33,34'.ro OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.2.1.1.6 |
gponOltPonPortOpticalParameterTablegpon Olt Pon Port Config table. SEQUENCE OF GponOltPonPortOpticalParameterEntry .1.3.6.1.4.1.231.7.1.3.10.2.2 |
gponOltPonPortOpticalParameterEntrygpon Olt Pon Port Config . GponOltPonPortOpticalParameterEntry .1.3.6.1.4.1.231.7.1.3.10.2.2.1 |
gponOltPonPortOpticalParameterPortIndexIndex of the table, PON port INDEX.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.2.1.1 |
gponOltPonPortOpticalParameterTemperaturero INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.2.1.2 |
gponOltPonPortOpticalParameterVoltagero INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.2.1.3 |
gponOltPonPortOpticalParameterCurrentro INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.2.1.4 |
gponOltPonPortOpticalParameterTxPowerro INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.2.1.5 |
gponOltPonPortOpticalRxPowerTablegpon Olt Pon Port Config table. SEQUENCE OF GponOltPonPortOpticalRxPowerEntry .1.3.6.1.4.1.231.7.1.3.10.2.3 |
gponOltPonPortOpticalRxPowerEntrygpon Olt Pon Port Config . GponOltPonPortOpticalRxPowerEntry .1.3.6.1.4.1.231.7.1.3.10.2.3.1 |
gponOltPonPortOpticalRxPowerPortIndexIndex of the table, PON port INDEX.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.3.1.1 |
gponOltPonPortOpticalRxPowerLinkStatusro Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.3.1.2 |
gponOltPonPortOpticalRxPowerRxPowerThe rx power of optical module. The unit is 0.1DBm.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.3.1.3 |
gponOltPonPortOpticalParameterAlarmTablegpon Olt Pon Port Config table. SEQUENCE OF GponOltPonPortOpticalParameterAlarmEntry .1.3.6.1.4.1.231.7.1.3.10.2.4 |
gponOltPonPortOpticalParameterAlarmEntrygpon Olt Pon Port Config . GponOltPonPortOpticalParameterAlarmEntry .1.3.6.1.4.1.231.7.1.3.10.2.4.1 |
gponOltPonPortPowerAlarmIndexIndex of the table, PON port INDEX.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.1 |
gponOltPonPortTxPowerAlarmUpLimitEnableIndex of the table, PON port INDEX.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.4.1.2 |
gponOltPonPortTxPowerAlarmUpLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.3 |
gponOltPonPortTxPowerAlarmUpLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.4 |
gponOltPonPortTxPowerAlarmLowLimitEnableIndex of the table, PON port INDEX.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.4.1.5 |
gponOltPonPortTxPowerAlarmLowLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.6 |
gponOltPonPortTxPowerAlarmLowLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.7 |
gponOltPonPortTemperatureAlarmUpLimitEnablerw Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.4.1.8 |
gponOltPonPortTemperatureAlarmUpLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.9 |
gponOltPonPortTemperatureAlarmUpLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.10 |
gponOltPonPortTemperatureAlarmLowLimitEnablerw Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.4.1.11 |
gponOltPonPortTemperatureAlarmLowLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.12 |
gponOltPonPortTemperatureAlarmLowLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.13 |
gponOltPonPortVoltageAlarmUpLimitEnablerw Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.4.1.14 |
gponOltPonPortVoltageAlarmUpLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.15 |
gponOltPonPortVoltageAlarmUpLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.16 |
gponOltPonPortVoltageAlarmLowLimitEnablerw Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.4.1.17 |
gponOltPonPortVoltageAlarmLowLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.18 |
gponOltPonPortVoltageAlarmLowLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.19 |
gponOltPonPortCurrentAlarmUpLimitEnablerw Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.4.1.20 |
gponOltPonPortCurrentAlarmUpLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.21 |
gponOltPonPortCurrentAlarmUpLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.22 |
gponOltPonPortCurrentAlarmLowLimitEnablerw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.23 |
gponOltPonPortCurrentAlarmLowLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.24 |
gponOltPonPortCurrentAlarmLowLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.4.1.25 |
gponOltPonSfpParameterAlarmTrap OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.2.5 |
gponOltPonSfpParameterAlarmStatusrw Enumeration .1.3.6.1.4.1.231.7.1.3.10.2.5.1 |
gponOltPonSfpParameterAlarmNotificationThe agent generates this notification when alarm was triggered . NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.10.2.5.2 |
gponOltONUBindTablegpon Olt Pon Port and onu binding table. SEQUENCE OF GponOltONUBindEntry .1.3.6.1.4.1.231.7.1.3.10.2.6 |
gponOltONUBindEntrygpon Olt Pon Port and onu binding entry . GponOltONUBindEntry .1.3.6.1.4.1.231.7.1.3.10.2.6.1 |
gponOltONUBindPortIndexPon port diID.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.6.1.1 |
gponOltONUBindONUIdONU ID (1-128).rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.6.1.2 |
gponOltONUBindSNSerial number of ONU.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.6.1.3 |
gponOltONUBindPasswordPassword.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.2.6.1.4 |
gponOltONUBindRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.2.6.1.5 |
nmsGponONUObj OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.3 |
gponOnuInfoTableGPON onu information table. SEQUENCE OF GponOnuInfoEntry .1.3.6.1.4.1.231.7.1.3.10.3.1 |
gponOnuInfoEntrygpon onu information table. GponOnuInfoEntry .1.3.6.1.4.1.231.7.1.3.10.3.1.1 |
gponONUInfoDeviceIndexPon port diID.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.1 |
onuVendorIDThis attribute identifies the vendor of the ONT. It is the same as the four most significant
bytes of the ONT serial number (4 bytes).ro OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.3.1.1.2 |
onuVersionThis attribute identifies the version of the ONT as defined by the vendor. Then character
value0 indicates that version information is not available or applicable.(14 bytes)ro OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.3.1.1.3 |
onuSerialNumThe serial number is unique for each ONT. It contains the vendor id and version number in
hexadecimal format.ro OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.3.1.1.4 |
onuTrafficManagementOptionThis attribute identifies the upstream traffic management function implemented in the ONT.
There are two options: 0 Priority controlled and flexibly scheduled upstream traffic. The
traffic scheduler and priority queue mechanism are used for upstream traffic. 1 Rate controlled
upstream traffic. The maximum upstream traffic of each individual connection is guaranteed .2
Priority and rate controlled. The traffic scheduler and priority queue mechanism are used for
upstream traffic. The maximum upstream traffic of each individual connection is guaranteed by
shaping.ro Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.5 |
onuBatteryBackuphis Boolean attribute specifies whether the ONT/NT supports backup battery monitoring. False
disables battery alarm monitoring; True enables battery alarm monitoring. (1 byte). Default
value is false.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.6 |
onuAdminState1 No shutdown/unlocks, 2 Shutdown/locks.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.7 |
onuOperationalState1 Enabled 2 Disable.ro Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.8 |
onuEquipmentIDThis attribute may be used to identify the specific type of ONT.ro OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.3.1.1.9 |
onuOMCCVersionro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.10 |
onuHardwareTypero INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.11 |
onuHardwareRevisionro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.12 |
onuSecurityCapabilityro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.13 |
onuSecurityModeThis attribute specifies the current security mode of the ONT. All secure
GEM ports in an ONT must use the same security mode at any given time. The
following codepoints are defined: 1 Reserved 2 AES algorithm 3..255 Reserved.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.14 |
onuTotalPriorityQueueNumberro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.15 |
onuTotalTrafficSchedulerNumberro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.16 |
onuTotalGEMPortNumberro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.17 |
onuTotalPOTSUNInumberro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.18 |
onuSysUpTimero INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.19 |
onuImageInstance0Versionro OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.3.1.1.20 |
onuImageInstance0Validro Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.21 |
onuImageInstance0Activatero Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.22 |
onuImageInstance0Commitro Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.23 |
onuImageInstance1Versionro OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.3.1.1.24 |
onuImageInstance1Validro Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.25 |
onuImageInstance1Activatero Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.26 |
onuImageInstance1Commitro Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.27 |
onuInfoOonuMacAddressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.3.1.1.28 |
onuFastLeaveCapabilityro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.29 |
onuPiggybackDbaRepro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.30 |
onuWholeOnuDbaRepro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.31 |
onuProtectionModeIndicates Protection scheme, (1) for Type-B scheme and (2) for Type-C scheme.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.1.1.32 |
onuDistancero INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.33 |
onuSwdlStatero INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.34 |
onuDeActiveReasonro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.1.1.35 |
gponOnuConfigTablegpon onu configuration table. SEQUENCE OF GponOnuConfigEntry .1.3.6.1.4.1.231.7.1.3.10.3.2 |
gponOnuConfigEntrygpon onu configuration entry . GponOnuConfigEntry .1.3.6.1.4.1.231.7.1.3.10.3.2.1 |
gponOnuConfigDeviceIndexGPON ONU device configuration index.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.2.1.1 |
gponOnuConfigActicate1-Acticate2-Deacticaterw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.2.1.2 |
gponOnuConfigEnable1-Enable2-Disable.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.2.1.3 |
gponOnuConfigRebootreboot(1).rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.2.1.4 |
gponOnuConfigEnablePMrw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.2.1.5 |
gponOnuConfigFlowProfileIDThe profileIndex corresponding to ONU Flow Profile Table. 0 means invalid. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.2.1.6 |
gponOnuConfigTcontVirPortBindingProfileIDIt points to the associated T-CONT and virtual port binding profile index. 0 means invalid.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.2.1.7 |
gponOnuConfigOnuProfileIDrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.2.1.8 |
gponOnuConfigUsMapProfileIDrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.2.1.9 |
gponOnuStatusTablegpon onu status table. SEQUENCE OF GponOnuStatusEntry .1.3.6.1.4.1.231.7.1.3.10.3.3 |
gponOnuStatusEntrygpon onu status entry . GponOnuStatusEntry .1.3.6.1.4.1.231.7.1.3.10.3.3.1 |
gponOnuStatusDeviceIndexro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.3.1.1 |
gponOnuStatusOnuSnro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.3.1.2 |
gponOnuStatusPonPortIDro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.3.1.3 |
gponOnuStatusOnuStatusro Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.3.1.4 |
gponOnuOpticalPowerTablegpon onu pon port power table. SEQUENCE OF GponOnuOpticalPowerEntry .1.3.6.1.4.1.231.7.1.3.10.3.4 |
gponOnuOpticalPowerEntrygpon onu pon port power entry . GponOnuOpticalPowerEntry .1.3.6.1.4.1.231.7.1.3.10.3.4.1 |
gponOnuOpticalPowerDeviceIndexro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.4.1.1 |
gponOnuOpticalPowerRxPowerro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.4.1.2 |
gponOnuOpticalPowerTxPowerro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.4.1.3 |
gponOnuOpticalParameterAlarmTablegpon onu status table. SEQUENCE OF GponOnuOpticalParameterAlarmEntry .1.3.6.1.4.1.231.7.1.3.10.3.5 |
gponOnuOpticalParameterAlarmEntrygpon onu status entry . GponOnuOpticalParameterAlarmEntry .1.3.6.1.4.1.231.7.1.3.10.3.5.1 |
gponOnuOpticalParameterAlarmDeviceIndexro INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.5.1.1 |
gponOnuOpticalTxPowerAlarmUpLimitEnablerw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.5.1.2 |
gponOnuOpticalTxPowerAlarmUpLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.5.1.3 |
gponOnuOpticalTxPowerAlarmUpLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.5.1.4 |
gponOnuOpticalTxPowerAlarmUpLimitRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.3.5.1.5 |
gponOnuOpticalTxPowerAlarmLowLimitEnablerw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.5.1.6 |
gponOnuOpticalTxPowerAlarmLowLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.5.1.7 |
gponOnuOpticalTxPowerAlarmLowLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.5.1.8 |
gponOnuOpticalTxPowerAlarmLowLimitRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.3.5.1.9 |
gponOnuOpticalRxPowerAlarmUpLimitEnablerw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.5.1.10 |
gponOnuOpticalRxPowerAlarmUpLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.5.1.11 |
gponOnuOpticalRxPowerAlarmUpLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.5.1.12 |
gponOnuOpticalRxPowerAlarmUpLimitRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.3.5.1.13 |
gponOnuOpticalRxPowerAlarmLowLimitEnablerw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.5.1.14 |
gponOnuOpticalRxPowerAlarmLowLimitThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.5.1.15 |
gponOnuOpticalRxPowerAlarmLowLimitClearThresholdrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.3.5.1.16 |
gponOnuOpticalRxPowerAlarmLowLimitRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.3.5.1.17 |
gponOnuSfpParameterAlarmTrap OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.3.6 |
gponOnuSfpParameterAlarmStatusro Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.6.1 |
gponOnuSfpParameterAlarmNotificationThe agent generates this notification when ONU SFP parameter alarms . NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.10.3.6.2 |
gponOnuStatusAlarmTrap OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.3.7 |
gponOnuStatusChangero Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.7.1 |
gponOnuStatusChangeNotificationThe agent generates this notification when ONU status change alarms . NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.10.3.7.2 |
gponOnuDyingGaspAlarmTrap OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.3.8 |
gponOnuDyingGaspStatusro Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.8.1 |
gponOnuDyingGaspNotificationThe agent generates this notification when ONU status change alarms . NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.10.3.8.2 |
gponOnuBatchUpdateTableOnu batch update table. SEQUENCE OF GponOnuBatchUpdateEntry .1.3.6.1.4.1.231.7.1.3.10.3.9 |
gponOnuBatchUpdateEntryOnu batch update table entry. GponOnuBatchUpdateEntry .1.3.6.1.4.1.231.7.1.3.10.3.9.1 |
gponOnuBatchUpdateLLIDsONU LLID list, which defines the ONU to be updated.rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.3.9.1.1 |
gponOnuBatchUpdateFileNameThe file name in OLT flash, which is ONU bin file and must be existed.rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.3.9.1.2 |
gponOnuBatchUpdateActionThe update operation indication. 0-no action for update 1-action for update.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.9.1.3 |
gponOnuBatchUpdateResultThe result for update. 0-success 1-processing 2-other result values and reserved for system.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.3.9.1.4 |
nmsGponUNIPortObj OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.4 |
onuUniPortConfigTableOnu UNI port config table. SEQUENCE OF OnuUniPortConfigEntry .1.3.6.1.4.1.231.7.1.3.10.4.1 |
onuUniPortConfigEntryOnu UNI port config table entry. OnuUniPortConfigEntry .1.3.6.1.4.1.231.7.1.3.10.4.1.1 |
onuUniPortConfigDeviceIndexro INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.1.1.1 |
onuUniPortConfigPortIndexro INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.1.1.2 |
onuUniPortConfigAdminState1-No shutdown 2-Shutdownrw Enumeration .1.3.6.1.4.1.231.7.1.3.10.4.1.1.3 |
onuUniPortConfigOperationalState1-enable 2-disablero Enumeration .1.3.6.1.4.1.231.7.1.3.10.4.1.1.4 |
onuUniPortConfigEthernetProfileIDIt points to the associated Ethernet UNI profile. 0 means cancel profile config.
Default value is 0.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.1.1.5 |
onuUniPortConfigOnuVLANTranslationProfileIDIt stores the profileIndex of the associated ONU VLAN translation profile.0 means cancel
profile config. Default value is 0.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.1.1.6 |
onuUniPortConfigRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.4.1.1.7 |
onuUniPortStatisticTableOnu UNI port config table. SEQUENCE OF OnuUniPortStatisticEntry .1.3.6.1.4.1.231.7.1.3.10.4.2 |
onuUniPortStatisticEntryOnu UNI port config table entry. OnuUniPortStatisticEntry .1.3.6.1.4.1.231.7.1.3.10.4.2.1 |
onuUniPortStatisticDeviceIndexro INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.2.1.1 |
onuUniPortStatisticUniPortIndexro INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.2.1.2 |
onuUniPortStatisticRxTotalFramesro INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.2.1.3 |
onuUniPortStatisticTxTotalFramesro INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.2.1.4 |
onuUniPortStatisticRxTotalBytesro INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.2.1.5 |
onuUniPortStatisticTxTotalBytesro INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.2.1.6 |
onuUniPortStatisticEncryptKeyErrorsro INTEGER .1.3.6.1.4.1.231.7.1.3.10.4.2.1.7 |
nmsGponVirPortObj OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.5 |
onuVirPortConfigTableOnu VIR port config table. SEQUENCE OF OnuVirPortConfigEntry .1.3.6.1.4.1.231.7.1.3.10.5.1 |
onuVirPortConfigEntryOnu VIR port config table entry. OnuVirPortConfigEntry .1.3.6.1.4.1.231.7.1.3.10.5.1.1 |
onuVirPortConfigDeviceIndexro INTEGER .1.3.6.1.4.1.231.7.1.3.10.5.1.1.1 |
onuVirPortConfigPortIndexro INTEGER .1.3.6.1.4.1.231.7.1.3.10.5.1.1.2 |
onuVirPortConfigTCONTIDStatic T-CONT index from ONUs perspective. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.5.1.1.3 |
onuVirPortConfigOltGEMPortIDEM port no which is assigned dynamically by OLT.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.5.1.1.4 |
onuVirPortConfigOltAllocIDlloc-ID which is assigned dynamically by OLT, a dynamic Alloc-ID is one-to-one mapped
to a static T-CONT index.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.5.1.1.5 |
onuVirPortConfigVirPortAdminStateThis attribute locks and unlocks the functions performed by this managed entity. 1 No
shutdown/unlocks, 2 Shutdown/locks.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.5.1.1.6 |
onuVirPortConfigEncryptionModeThe encryption mode for the GEM port. Possible values are: 1 (Enabled), 2 (Disabled).rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.5.1.1.7 |
onuVirPortConfigDownstreamRateLimitConfig Virtual port downstream rate limit(unit:64kbps).rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.5.1.1.8 |
onuVirPortConfigOltVLANTranslationProfileIDIt stores the profileIndex1 of the associated OLT VLAN translation profile. 1C1024.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.5.1.1.9 |
onuVirPortConfigONUMacFilterProfileIDrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.5.1.1.10 |
onuVirPortConfigONUMacFilterPreassignProfileIDrw INTEGER .1.3.6.1.4.1.231.7.1.3.10.5.1.1.11 |
onuVirPortConfigRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.5.1.1.12 |
nmsGponProfile OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.6 |
onuVLANProfile OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.10.6.1 |
onuVLANProfileTableOnu VLAN Profile table. SEQUENCE OF OnuVLANProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.1.1 |
onuVLANProfileEntryOnu VLAN Profile. OnuVLANProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.1.1.1 |
onuVLANProfileIndexIndex of the table, ONU VLAN INDEX.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.1.1.1.1 |
onuVLANProfileNameName of VLAN profile.rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.6.1.1.1.2 |
onuVLANProfileVlanMode1 Transparent,2 Tag, 3 Translation,4 Vlan-stacking, 5 Aggregation,6 Trunk. Defualt value is 1.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.1.1.1.3 |
onuVLANProfilePVIDThe pvid of the port(1-4094). Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.1.1.1.4 |
onuVLANProfileTrunkVlansONU UNI port allowed VLAN in trunk mode. There is totally 4094 bit, and each bit value means allow VLAN or not, 0 mean forbidding VLAN and 1 means allowed VLAN.rw BITS .1.3.6.1.4.1.231.7.1.3.10.6.1.1.1.5 |
onuVLANProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.6.1.1.1.6 |
onuVLANTranslationTableOnu VLAN translation Profile table. SEQUENCE OF OnuVLANTranslationEntry .1.3.6.1.4.1.231.7.1.3.10.6.1.2 |
onuVLANTranslationEntryOnu VLAN translation Profile entry. OnuVLANTranslationEntry .1.3.6.1.4.1.231.7.1.3.10.6.1.2.1 |
onuVLANTranslationIndex1Index of the table, ONU VLAN translation INDEX 1.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.1.2.1.1 |
onuVLANTranslationIndex2Index of the table, ONU VLAN translation INDEX 2.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.1.2.1.2 |
onuVLANTranslationNameName of VLAN translation profile.rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.6.1.2.1.3 |
onuVLANTranslationSrcVlanONU VLAN translation source VLAN id.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.1.2.1.4 |
onuVLANTranslationDstVlanONU VLAN translation destination VLAN id.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.1.2.1.5 |
onuVLANTranslationRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.6.1.2.1.6 |
onuTCONTServiceProfileTableOnu VLAN translation Profile table. SEQUENCE OF OnuTCONTServiceProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.2 |
onuTCONTServiceProfileEntryOnu VLAN translation Profile entry. OnuTCONTServiceProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.2.1 |
onuTcontServiceProfileIndexIndex of the table, ONU VLAN T-CONT service profile INDEX .ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.2.1.1 |
onuTcontServiceProfileNameONU VLAN T-CONT service profile Name .rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.6.2.1.2 |
onuTcontServiceProfileUsBandwidthProIDIt points to the associated ONU bandwidth profile for upstream. 1 C 256. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.2.1.3 |
onuTcontServiceProfileUsQueuingSchedulingType1 Flow-based priority-controlled, 2 Flow-based rate-controlled, 3 Flow-based priority-and-rate-controlled. Default value is 1.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.2.1.4 |
onuTcontServiceProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.6.2.1.5 |
onuBandwidthProfileTableOnu Bandwidth Profile table. SEQUENCE OF OnuBandwidthProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.3 |
onuBandwidthProfileEntryOnu Bandwidth Profile entry. OnuBandwidthProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.3.1 |
onuBandwidthProfileIndexIndex of the table, ONU Bandwidth Profile INDEX .ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.3.1.1 |
onuBandwidthProfileNameONU Bandwidth Profile name .rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.6.3.1.2 |
onuBandwidthProfileTcontTypeTraffic type which is equivalent to T-CONT type: 1 T-CONT type 1,2 T-CONT type 2,3 T-CONT type 3,
4 T-CONT type 4, 5 T-CONT type 5.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.3.1.3 |
onuBandwidthProfileFixedBandwidthFixed bandwidth, the granularity is 64Kbps. The unit is Kbps. Range of allowed values, 128 C2500000. Default value is 128Kbps.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.3.1.4 |
onuBandwidthProfileAssuredBandwidthAssured bandwidth, the granularity is 64Kbps. The unit is Kbps. Range of allowed values, 0, 256 C 2500000. Not Valid for Type 1
TCONT. Default value is 0.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.3.1.5 |
onuBandwidthProfileMaximumBandwidthMaximum bandwidth, the granularity is 64Kbps. The unit is Kbps. Range of allowed values, 128 C 2500000. Not valid for Type 1
TCONT. Default value is 1024.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.3.1.6 |
onuBandwidthProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.6.3.1.7 |
onuTcontVirportBindProfileTableOnu Tcont Virport Bind Profile table. SEQUENCE OF OnuTcontVirportBindProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.4 |
onuTcontVirportBindProfileEntryOnu Tcont Virport Bind Profile entry. OnuTcontVirportBindProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.4.1 |
onuTcontVirportBindProfileIndexIndex of the table, ONU Tcont Virport Bind Profile INDEX .ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.4.1.1 |
onuTcontVirportBindProfileNameONU Tcont Virport Bind Profile name .rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.6.4.1.2 |
onuTcontVirportBindProfileTcontIDT-CONT index from ONUs perspective. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.4.1.3 |
onuTcontVirportBindProfileTcontServiceProfileIDIt points to the associated ONU T-CONT service profile. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.4.1.4 |
onuTcontVirportBindProfileVirportIndexVirtual port index from ONUs perspective. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.4.1.5 |
onuTcontVirportBindProfileVirportServiceProfileIDIt points to the associated ONU virtual port service profile. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.4.1.6 |
onuTcontVirportBindProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.6.4.1.7 |
onuVirtualPortServiceProfileTableOnu Virtual Port Service Profile table. SEQUENCE OF OnuVirtualPortServiceProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.5 |
onuVirtualPortServiceProfileEntryOnu Virtual Port Service Profile entry. OnuVirtualPortServiceProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.5.1 |
onuVirportProfileIndexIndex of the table, ONU Virtual Port Service Profile INDEX .ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.5.1.1 |
onuVirportProfileNameONU Virtual Port Service Profile Name .rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.6.5.1.2 |
onuVirportProfileUsTrafficMapTypepstream traffic mapping type is inherited from the upstreamTrafficMappingType of its ONU/ONT.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.5.1.3 |
onuVirportProfileTypeOfServiceType of service for which this virtual port is to be used: 1 Data, 2 IPTV, 3 Video-on-demand, 4 VoIP,
5 T1, 6 E1, 7 HPNA, 8 Others. Default value is 1.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.5.1.4 |
onuVirportProfileEncrypModeEncryption mode: 1 Enabled, 2 Disabled. Default value is 2.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.5.1.5 |
onuVirportProfileUsBwProIDIt points to the associated ONU bandwidth profile for upstream.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.5.1.6 |
onuVirportProfileUsFlowPriorityIts valid only in either flow-based priority-controlled or flow-based priority-and-rate-
controlled upstream queuing and scheduling type. Valid range 0 - 7.Default value is 0.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.5.1.7 |
onuVirportProfileUsFlowWeightIts valid only in flow-based rate-controlled queuing and scheduling type. Valid range 0-255.
Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.5.1.8 |
onuVirportProfileUsRateCtlSchedulerProIDIt points to the associated ONU upstream rate-control scheduler profile. 1C128.
Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.5.1.9 |
onuVirportProfileDsBwProIDIt points to the associated ONU bandwidth profile for downstream. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.5.1.10 |
onuVirportProfileDsQueueSchType0 C Priority Controlled. 1 - Flow-based priority-controlled. Default value is 1.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.5.1.11 |
onuVirportProfileDsFlowPriorityIts valid only in flow-based priority-controlled downstream queuing and scheduling type.
Valid range 0 - 7. Default value is 0.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.5.1.12 |
onuVirportProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.6.5.1.13 |
onuFlowProfileTableOnu flow Profile table. SEQUENCE OF OnuFlowProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.6 |
onuFlowProfileEntryOnu flow profile entry. OnuFlowProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.6.1 |
onuFlowProfileIndex1Index of the table, ONU flow Profile INDEX 1.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.6.1.1 |
onuFlowProfileIndex2Index of the table, ONU flow Profile INDEX 2.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.6.1.2 |
onuFlowProfileNameIONU flow Profile name.rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.6.6.1.3 |
onuFlowProfileUniTypePhysical port type: 1 Ethernet UNI, 2 POTS UNI, 3 T1, 4 E1, 5 HPNA, 6 IP Host. Default value is 1.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.6.1.4 |
onuFlowProfileUniPortBitMapUNI Port bit map representing 1 or more UNI ports to be associated with a flow. The value 0 will
indicate the flow applies to all UNI ports of the ONU. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.6.1.5 |
onuFlowProfileUsMapTypeUpstream Traffic Mapping mechanism: 1 User Port, 2 VLAN ID, 3 PBIT, 4 VLAN ID + PBIT, 5 Ether Type,
6 DSCP, 7 User Port + PBITS, 8 User Port + DSCP, The valid values are 1 to 4. Values 5, 6, 7 and 8
are reserved for future use. Default value is 2.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.6.1.6 |
onuFlowProfileVlanIdStartThe beginning of the VLAN Id range to be mapped to the flow. 1..4095. Set this value only if the
mapping type is VLAN ID or VLAND + PBITS. Default value is 101.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.6.1.7 |
onuFlowProfileVlanIdStopThe end of the VLAN Id range. 1..4095. VLAN ID StopCVLAN ID Start should be less than equal to 12
for 1 flow. Set this value only if the mapping type is VLAN ID or VLAND + PBITS. Default value is 101.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.6.1.8 |
onuFlowProfilePBITsMapBit map representing PBITs that have to be mapped to the flow. If the value is set to 1, it would mean
PBIT 0, if the value is set to 2, it would mean PBIT 1, if the value is set to 3, it would mean, both
PBIT 0 and 1. The value 255 would mean, PBITS 0 through 7. Set this value only if the mapping type is
PBITS or VLAND + PBITS. efault value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.6.1.9 |
onuFlowProfileVirportNoONU flow profile virtual port number.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.6.1.10 |
onuFlowProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.6.6.1.11 |
onuRateControlSchedulerProfileTableOnu rate control scheduler profile table. SEQUENCE OF OnuRateControlSchedulerProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.7 |
onuRateControlSchedulerProfileEntryOnu rate control scheduler profile entry. OnuRateControlSchedulerProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.7.1 |
onuRateCtlProfileIndexIndex of the table, ONU rate control scheduler profile INDEX 1.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.7.1.1 |
onuRateCtlProfileNameONU rate control scheduler profile name.rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.6.7.1.2 |
onuRateCtlProfileSirSIR, the granularity is 64Kbps. The unit is Kbps. Range of allowed values, 128 C 2500000. Default value is 128.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.7.1.3 |
onuRateCtlProfilePirSIR, the granularity is 64Kbps. The unit is Kbps. Range of allowed values, 128 C 2500000. Default value is 1024.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.7.1.4 |
onuRateCtlProfileScheduleWeightScheduler weight. Valid range 0-255. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.7.1.5 |
onuRateCtlProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.6.7.1.6 |
onuEthernetUNIConfigProfileTableOnu Ethernet UNI configuration profile table. SEQUENCE OF OnuEthernetUNIConfigProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.8 |
onuEthernetUNIConfigProfileEntryOnu Ethernet UNI configuration profile entry. OnuEthernetUNIConfigProfileEntry .1.3.6.1.4.1.231.7.1.3.10.6.8.1 |
onuEthernetUNIPortProfileIndexIndex of the table, ONU Ethernet UNI configuration profile INDEX 1.ro INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.8.1.1 |
onuEthernetUNIPortProfileNameONU Ethernet UNI configuration profile name.rw OCTET STRING .1.3.6.1.4.1.231.7.1.3.10.6.8.1.2 |
onuEthernetUNIPortAutoNegotiationAuto negotiation: 1 Enabled, 2 Disabled. Default value is 1.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.8.1.3 |
onuEthernetUNIPortSpeedSpeed: 1 10Mbps, 2 100Mbps, 3 1000Mbps. Default value is 2.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.8.1.4 |
onuEthernetUNIPortDuplexDuplex: 1 Full, 2 Half. Default value is 1.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.8.1.5 |
onuEthernetUNIPortExpectedTypeThis attribute supports pre-provisioning. It is coded as follows: 1 Autosense, 2 to 254 is compatible
with other Ethernet circuit pack type Upon ME instantiation, the ONT sets this attribute to 0. Default value is 1.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.8.1.6 |
onuEthernetUNIPortMaxFrameSizeThis attribute denotes the maximum frame size allowed across this interface. Upon ME instantiation, the ONT
sets the attribute to 1518. Default value is 1522.rw INTEGER .1.3.6.1.4.1.231.7.1.3.10.6.8.1.7 |
onuEthernetUNIPortEthernetInterfaceWiringThis attribute specifies the Ethernet interface wiring: 1 DCE (default), 2 DTE. Default value is 1.rw Enumeration .1.3.6.1.4.1.231.7.1.3.10.6.8.1.8 |
onuEthernetUNIPortProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.10.6.8.1.9 |