NETSCREEN-VPN-MON-MIB
This module defines the object that are used to monitor VPN tunnels
Main OID:
netscreenVpnMonMibModule.1.3.6.1.4.1.3224.4.0.1
46
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
netscreenVpnMonMibModuleThis module defines the object that are used to monitor VPN
tunnels MODULE-IDENTITY .1.3.6.1.4.1.3224.4.0.1 |
netscreenVpnMon OBJECT IDENTIFIER .1.3.6.1.4.1.3224.4.1 |
nsVpnMonTableA list of active VPN tunnel entries. SEQUENCE OF NsVpnMonEntry .1.3.6.1.4.1.3224.4.1.1 |
nsVpnMonEntryA VPN tunnel entry containing attributes for both IKE Phase 1
and Phase 2 as well as associated policy NsVpnMonEntry .1.3.6.1.4.1.3224.4.1.1.1 |
nsVpnMonIndexA unique value for each active VPN tunnel. Its value ranges
between 1 and 65535 and may not be contiguous. Due to the
dynamic nature of active VPN tunnels, the index has no other
meaning but a pure indexro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.1 |
nsVpnMonInPlyIdThe incoming policy ID for which this tunnel is created for.
-1 means no policy associates with this SA.ro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.2 |
nsVpnMonOutPlyIdThe outgoing policy ID for which this tunnel is created for.
-1 means no policy associates with this SA.ro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.3 |
nsVpnMonVpnNameA textual string contains information about the VPN entity
from which this tunnel was derived.ro DisplayString .1.3.6.1.4.1.3224.4.1.1.1.4 |
nsVpnMonVsysNameA textual string contains the Virtual system to which this
tunnel belongs.ro DisplayString .1.3.6.1.4.1.3224.4.1.1.1.5 |
nsVpnMonTunnelTypeProtocol type used for the tunnelro Enumeration .1.3.6.1.4.1.3224.4.1.1.1.6 |
nsVpnMonEspEncAlga value which identifies a particular algorithm to be used to
provide secrecy protection for ESP.ro Enumeration .1.3.6.1.4.1.3224.4.1.1.1.7 |
nsVpnMonEspAuthAlgThe ESP Authentication Algorithm used in the IPsec.ro Enumeration .1.3.6.1.4.1.3224.4.1.1.1.8 |
nsVpnMonAhAlga value which identifies a particular algorithm to be used to
provide integrity protection for AH.ro Enumeration .1.3.6.1.4.1.3224.4.1.1.1.9 |
nsVpnMonKeyTypea value which identifies a key exchange protocol to be used
for the negotiationro Enumeration .1.3.6.1.4.1.3224.4.1.1.1.10 |
nsVpnMonP1Autha value which identifies Phase 1 authentication methodro Enumeration .1.3.6.1.4.1.3224.4.1.1.1.11 |
nsVpnMonVpnTypeThe type of this VPN tunnel, either a dialup or site-to-sitero Enumeration .1.3.6.1.4.1.3224.4.1.1.1.12 |
nsVpnMonRmtGwIpThe peer Gateway's IP addressro IpAddress .1.3.6.1.4.1.3224.4.1.1.1.13 |
nsVpnMonRmtGwIdThe peer Gateway's IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3224.4.1.1.1.14 |
nsVpnMonMyGwIpThe local Gateway's IP addressro IpAddress .1.3.6.1.4.1.3224.4.1.1.1.15 |
nsVpnMonMyGwIdThe local Gateway's IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3224.4.1.1.1.16 |
nsVpnMonOutSpiThe SPI for outgoing packetsro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.17 |
nsVpnMonInSpiThe SPI for incoming packetsro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.18 |
nsVpnMonMonStateThe monitoring status, if it is on, an icmp ping will be sent
over the tunnel periodically to test the connectivity and
latencyro Enumeration .1.3.6.1.4.1.3224.4.1.1.1.19 |
nsVpnMonTunnelStateThe current tunnel status determined by the icmp ping if The
monitoring status is on.ro Enumeration .1.3.6.1.4.1.3224.4.1.1.1.20 |
nsVpnMonP1StateThe IKE's Phase 1 statusro Enumeration .1.3.6.1.4.1.3224.4.1.1.1.21 |
nsVpnMonP1LifeTimean active Phase 1 sa's time left before re-key. -1 means
unlimited lifetime.ro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.22 |
nsVpnMonP2StateThe IKE's Phase 2 statusro Enumeration .1.3.6.1.4.1.3224.4.1.1.1.23 |
nsVpnMonP2LifeTimean active Phase 2 sa's time left before re-key. -1 means
unlimited life time.ro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.24 |
nsVpnMonP2LifeBytesan active Phase 2 sa's bytes left before re-key. -1 means
unlimited life bytes.ro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.25 |
nsVpnMonDelayAvga kind of rolling average of latency, in milliseconds. -1 has
no meaning here, which means nsVpnMonDelayAvg has not been
calculated yet.ro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.26 |
nsVpnMonDelayLastlatency in last sample, in milliseconds.
-1 means either vpn tunnel is inactive or vpn tunnel monitor is
not turned on.ro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.27 |
nsVpnMonAvailpercentage over 30 samplesro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.28 |
nsVpnMonSaIdSA identifier, also used as table indexro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.29 |
nsVpnMonGroupIdGroup Identifierro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.30 |
nsVpnMonUsrIdUser Identifierro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.31 |
nsVpnMonStartSessRequestTimeStart Session request timestampro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3224.4.1.1.1.32 |
nsVpnMonStartSessEstTimeStart Session establish timestampro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3224.4.1.1.1.33 |
nsVpnMonEndSessTimeEnd Session timestamp [when session terminates]ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3224.4.1.1.1.34 |
nsVpnMonBytesInIncoming bytes through this sa.ro Counter32 .1.3.6.1.4.1.3224.4.1.1.1.35 |
nsVpnMonBytesOutOutgoing bytes through this sa.ro Counter32 .1.3.6.1.4.1.3224.4.1.1.1.36 |
nsVpnMonPacketsInIncoming packets through this sa.ro Counter32 .1.3.6.1.4.1.3224.4.1.1.1.37 |
nsVpnMonPacketsOutOutgoing packets through this sa.ro Counter32 .1.3.6.1.4.1.3224.4.1.1.1.38 |
nsVpnMonIfIndexinterface index.ro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.39 |
nsVpnMonUpdateTimeTimestamp [Whenever any member of the row gets updated, the
timestamp is updated]ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3224.4.1.1.1.40 |
nsVpnMonDNDN namero DisplayString .1.3.6.1.4.1.3224.4.1.1.1.41 |
nsVpnMonIfInfoInternal id assigned to this interface. Stays persistent across resets.ro Integer32 .1.3.6.1.4.1.3224.4.1.1.1.42 |