Home/Catalog/NETSCREEN-VPN-IKE-MIB

NETSCREEN-VPN-IKE-MIB

This module defines the object that are used to monitor VPN IKE info

Main OID:

netscreenVpnIkeMibModule.1.3.6.1.4.1.3224.4.0.3

Objects

Active

Status

Dependencies

Imported Objects

NETSCREEN-SMI

SNMPv2-SMI

SNMPv2-TC

Objects

15 total

Object Name	Syntax	OID
netscreenVpnIkeMibModuleThis module defines the object that are used to monitor VPN IKE info MODULE-IDENTITY `.1.3.6.1.4.1.3224.4.0.3`	MODULE-IDENTITY	`.1.3.6.1.4.1.3224.4.0.3`
nsVpnIke OBJECT IDENTIFIER `.1.3.6.1.4.1.3224.4.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3224.4.3`
nsVpnIkeTableIPSec supports the automated generation and negotiation of keys and security associations using the Internet Key Exchange(IKE) protocol. This table collects the IKE configuration in NetScreen device. SEQUENCE OF NsVpnIkeEntry `.1.3.6.1.4.1.3224.4.3.1`	SEQUENCE OF NsVpnIkeEntry	`.1.3.6.1.4.1.3224.4.3.1`
nsVpnIkeEntryEach entry in the nsVpnIkeTable holds a set of configuration parameters associated with an IKE. NsVpnIkeEntry `.1.3.6.1.4.1.3224.4.3.1.1`	NsVpnIkeEntry	`.1.3.6.1.4.1.3224.4.3.1.1`
nsVpnIkeIndexA unique value for ike table. Its value ranges between 0 and 65535 and may not be contiguous.ro Integer32 `.1.3.6.1.4.1.3224.4.3.1.1.1`	Integer32	`.1.3.6.1.4.1.3224.4.3.1.1.1`
nsVpnIkeNameEach IKE configuration can have a readable name.ro DisplayString `.1.3.6.1.4.1.3224.4.3.1.1.2`	DisplayString	`.1.3.6.1.4.1.3224.4.3.1.1.2`
nsVpnIkeReplayProcEnable Replay Protectionro Enumeration `.1.3.6.1.4.1.3224.4.3.1.1.3`	Enumeration	`.1.3.6.1.4.1.3224.4.3.1.1.3`
nsVpnIkeGWTunRemote Gateway Tunnel Namero DisplayString `.1.3.6.1.4.1.3224.4.3.1.1.4`	DisplayString	`.1.3.6.1.4.1.3224.4.3.1.1.4`
nsVpnIkePh2ProOnePhase 2 Proposal onero DisplayString `.1.3.6.1.4.1.3224.4.3.1.1.5`	DisplayString	`.1.3.6.1.4.1.3224.4.3.1.1.5`
nsVpnIkePh2ProTwoPhase 2 Proposal tworo DisplayString `.1.3.6.1.4.1.3224.4.3.1.1.6`	DisplayString	`.1.3.6.1.4.1.3224.4.3.1.1.6`
nsVpnIkePh2ProThreePhase 2 Proposal threero DisplayString `.1.3.6.1.4.1.3224.4.3.1.1.7`	DisplayString	`.1.3.6.1.4.1.3224.4.3.1.1.7`
nsVpnIkePh2ProFourPhase 2 Proposal fourro DisplayString `.1.3.6.1.4.1.3224.4.3.1.1.8`	DisplayString	`.1.3.6.1.4.1.3224.4.3.1.1.8`
nsVpnIkeMonitorEnableEnable to monitor VPN tunnel's link status.ro Enumeration `.1.3.6.1.4.1.3224.4.3.1.1.9`	Enumeration	`.1.3.6.1.4.1.3224.4.3.1.1.9`
nsVpnIkeTransModeTransport Mode Enable (For L2TP-over-IPSec only)ro Enumeration `.1.3.6.1.4.1.3224.4.3.1.1.10`	Enumeration	`.1.3.6.1.4.1.3224.4.3.1.1.10`
nsVpnIkeVsysvsys the configuration belongs to.ro Integer32 `.1.3.6.1.4.1.3224.4.3.1.1.11`	Integer32	`.1.3.6.1.4.1.3224.4.3.1.1.11`

More MIBs from Netscreen

Browse all NetscreenMIBs →

NETSCREEN-VR-OSPF-MIB

SNMP MIB module

157 objects→

NETSCREEN-OSPF-MIB

The NETSCREEN-OSPF-MIB provides SNMP access to monitor and manage Juniper NetScreen firewall instances running OSPF Version 2, exposing critical routing metrics such as neighbor adjacency states, interface link costs, and LSDB synchronization status for troubleshooting dynamic routing convergence.

SNMP MIB module

SNMP MIB module

NETSCREEN-INTERFACE-MIB

The NETSCREEN-INTERFACE-MIB provides SNMP access to monitor and manage interface configuration parameters, including status, speed, duplex settings, and traffic statistics, specifically for Juniper Networks NetScreen firewall appliances.

61 objects→

NETSCREEN-BGP4-MIB

The NETSCREEN-BGP4-MIB module enables monitoring and management of Border Gateway Protocol (BGP) session states, neighbor relationships, and routing table statistics on Juniper NetScreen firewalls. It provides specific counters and gauges for BGP-4 protocol events, including peer state transitions, route advertisements, and error conditions within the device's routing engine.

53 objects→