Home/Catalog/NETSCREEN-SET-SNMP-MIB

NETSCREEN-SET-SNMP-MIB

This module defines the object that are used to monitor SNMP setting

Main OID:

netscreenSetSnmpMibModule.1.3.6.1.4.1.3224.7.0.9

Objects

Active

Status

Dependencies

Imported Objects

NETSCREEN-SMI

SNMPv2-SMI

SNMPv2-TC

Objects

14 total

Object Name	Syntax	OID
netscreenSetSnmpMibModuleThis module defines the object that are used to monitor SNMP setting MODULE-IDENTITY `.1.3.6.1.4.1.3224.7.0.9`	MODULE-IDENTITY	`.1.3.6.1.4.1.3224.7.0.9`
nsSetSNMP OBJECT IDENTIFIER `.1.3.6.1.4.1.3224.7.9`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3224.7.9`
nsSetSnmpSysNameSNMP agent's sysname.ro DisplayString `.1.3.6.1.4.1.3224.7.9.1`	DisplayString	`.1.3.6.1.4.1.3224.7.9.1`
nsSetSnmpContactcontact name.ro DisplayString `.1.3.6.1.4.1.3224.7.9.2`	DisplayString	`.1.3.6.1.4.1.3224.7.9.2`
nsSetSnmpLocationSNMP agent Location.ro DisplayString `.1.3.6.1.4.1.3224.7.9.3`	DisplayString	`.1.3.6.1.4.1.3224.7.9.3`
nsSetSnmpVPNEnableSecure SNMP traffic via VPN encryptionro Enumeration `.1.3.6.1.4.1.3224.7.9.4`	Enumeration	`.1.3.6.1.4.1.3224.7.9.4`
nsSetSnmpCommHostTableThe snmp community and host table SEQUENCE OF NsSetSnmpCommHostEntry `.1.3.6.1.4.1.3224.7.9.5`	SEQUENCE OF NsSetSnmpCommHostEntry	`.1.3.6.1.4.1.3224.7.9.5`
nsSetSnmpCommHostEntryAn entry containing community and hosts information NsSetSnmpCommHostEntry `.1.3.6.1.4.1.3224.7.9.5.1`	NsSetSnmpCommHostEntry	`.1.3.6.1.4.1.3224.7.9.5.1`
nsSetSnmpCommHostIndexA unique value for snmp community & host table. Its value ranges between 0 and 65535 and may not be contiguous.ro Integer32 `.1.3.6.1.4.1.3224.7.9.5.1.1`	Integer32	`.1.3.6.1.4.1.3224.7.9.5.1.1`
nsSetSnmpCommunitySNMP community name.ro DisplayString `.1.3.6.1.4.1.3224.7.9.5.1.2`	DisplayString	`.1.3.6.1.4.1.3224.7.9.5.1.2`
nsSetSnmpHostInCommSNMP host ip address.ro IpAddress `.1.3.6.1.4.1.3224.7.9.5.1.3`	IpAddress	`.1.3.6.1.4.1.3224.7.9.5.1.3`
nsSetSnmpWritePermitPermission to write.ro Enumeration `.1.3.6.1.4.1.3224.7.9.5.1.4`	Enumeration	`.1.3.6.1.4.1.3224.7.9.5.1.4`
nsSetSnmpTrapPermitPermission to receive trap.ro Enumeration `.1.3.6.1.4.1.3224.7.9.5.1.5`	Enumeration	`.1.3.6.1.4.1.3224.7.9.5.1.5`
nsSetSnmpTrafficAlarmPermitPermission of including traffic alarm in trap.ro Enumeration `.1.3.6.1.4.1.3224.7.9.5.1.6`	Enumeration	`.1.3.6.1.4.1.3224.7.9.5.1.6`

More MIBs from Netscreen

Browse all NetscreenMIBs →

NETSCREEN-VR-OSPF-MIB

SNMP MIB module

157 objects→

NETSCREEN-OSPF-MIB

The NETSCREEN-OSPF-MIB provides SNMP access to monitor and manage Juniper NetScreen firewall instances running OSPF Version 2, exposing critical routing metrics such as neighbor adjacency states, interface link costs, and LSDB synchronization status for troubleshooting dynamic routing convergence.

SNMP MIB module

SNMP MIB module

NETSCREEN-INTERFACE-MIB

The NETSCREEN-INTERFACE-MIB provides SNMP access to monitor and manage interface configuration parameters, including status, speed, duplex settings, and traffic statistics, specifically for Juniper Networks NetScreen firewall appliances.

61 objects→

NETSCREEN-BGP4-MIB

The NETSCREEN-BGP4-MIB module enables monitoring and management of Border Gateway Protocol (BGP) session states, neighbor relationships, and routing table statistics on Juniper NetScreen firewalls. It provides specific counters and gauges for BGP-4 protocol events, including peer state transitions, route advertisements, and error conditions within the device's routing engine.

53 objects→