Home/Catalog/NETSCREEN-SET-LOG-MIB

NETSCREEN-SET-LOG-MIB

AI MIB Summary

The NETSCREEN-SET-LOG-MIB module enables monitoring and configuration of syslog parameters on Juniper Networks NetScreen firewalls, specifically managing the destination IP addresses, UDP/TCP ports, and facility/severity levels for remote system log transmission.

This module defines the object that are used to monitor syslog setting

Main OID:

netscreenSetLogMibModule.1.3.6.1.4.1.3224.7.0.8

Objects

Active

Status

Dependencies

Imported Objects

NETSCREEN-SMI

SNMPv2-SMI

SNMPv2-TC

Objects

14 total

Object Name	Syntax	OID
netscreenSetLogMibModuleThis module defines the object that are used to monitor syslog setting MODULE-IDENTITY `.1.3.6.1.4.1.3224.7.0.8`	MODULE-IDENTITY	`.1.3.6.1.4.1.3224.7.0.8`
nsSetLog OBJECT IDENTIFIER `.1.3.6.1.4.1.3224.7.8`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3224.7.8`
nsSetLogEnableEnable Syslog messagesro Enumeration `.1.3.6.1.4.1.3224.7.8.1`	Enumeration	`.1.3.6.1.4.1.3224.7.8.1`
nsSetLogVPNEnableSecure syslog message traffic using VPN encryptionro Enumeration `.1.3.6.1.4.1.3224.7.8.2`	Enumeration	`.1.3.6.1.4.1.3224.7.8.2`
nsSetLogTrafficIncluding traffic log when recording administration logro Enumeration `.1.3.6.1.4.1.3224.7.8.3`	Enumeration	`.1.3.6.1.4.1.3224.7.8.3`
nsSetLogHostNamesyslog server name or ip addressro DisplayString `.1.3.6.1.4.1.3224.7.8.4`	DisplayString	`.1.3.6.1.4.1.3224.7.8.4`
nsSetLogPortsyslog server port numberro Integer32 `.1.3.6.1.4.1.3224.7.8.5`	Integer32	`.1.3.6.1.4.1.3224.7.8.5`
nsSetLogSecFacilitySecurity Facility of syslog serverro Enumeration `.1.3.6.1.4.1.3224.7.8.6`	Enumeration	`.1.3.6.1.4.1.3224.7.8.6`
nsSetLogFacilityFacility of syslog serverro Enumeration `.1.3.6.1.4.1.3224.7.8.7`	Enumeration	`.1.3.6.1.4.1.3224.7.8.7`
nsSetLogLevelOnly log messages with a priority level of EMERGENCY/ALERT/CRITICAL/ERROR/WARNING/NOTICE/INFO/DEBUG or higherro Enumeration `.1.3.6.1.4.1.3224.7.8.8`	Enumeration	`.1.3.6.1.4.1.3224.7.8.8`
nsSetLogWebTrendsEnableEnable WebTrends Firewall syslog report.ro Enumeration `.1.3.6.1.4.1.3224.7.8.9`	Enumeration	`.1.3.6.1.4.1.3224.7.8.9`
nsSetLogWebTrendsVPNEnableSecure WebTrends message via VPN encryptionro Enumeration `.1.3.6.1.4.1.3224.7.8.10`	Enumeration	`.1.3.6.1.4.1.3224.7.8.10`
nsSetLogWebTrendsHostNameWebTrends Host Namero DisplayString `.1.3.6.1.4.1.3224.7.8.11`	DisplayString	`.1.3.6.1.4.1.3224.7.8.11`
nsSetLogWebTrendsPortWebTrends Host Portro Integer32 `.1.3.6.1.4.1.3224.7.8.12`	Integer32	`.1.3.6.1.4.1.3224.7.8.12`

More MIBs from Netscreen

Browse all NetscreenMIBs →

NETSCREEN-VR-OSPF-MIB

SNMP MIB module

157 objects→

NETSCREEN-OSPF-MIB

The NETSCREEN-OSPF-MIB provides SNMP access to monitor and manage Juniper NetScreen firewall instances running OSPF Version 2, exposing critical routing metrics such as neighbor adjacency states, interface link costs, and LSDB synchronization status for troubleshooting dynamic routing convergence.

SNMP MIB module

SNMP MIB module

NETSCREEN-INTERFACE-MIB

The NETSCREEN-INTERFACE-MIB provides SNMP access to monitor and manage interface configuration parameters, including status, speed, duplex settings, and traffic statistics, specifically for Juniper Networks NetScreen firewall appliances.

61 objects→

NETSCREEN-BGP4-MIB

The NETSCREEN-BGP4-MIB module enables monitoring and management of Border Gateway Protocol (BGP) session states, neighbor relationships, and routing table statistics on Juniper NetScreen firewalls. It provides specific counters and gauges for BGP-4 protocol events, including peer state transitions, route advertisements, and error conditions within the device's routing engine.

53 objects→