Home/Catalog/NETSCREEN-SET-DHCP-MIB

NETSCREEN-SET-DHCP-MIB

This module defines the object that are used to monitor all the configuration info

Main OID:

netscreenSetDhcpMibModule.1.3.6.1.4.1.3224.7.0.5

Objects

Active

Status

Dependencies

Imported Objects

NETSCREEN-SMI

SNMPv2-SMI

SNMPv2-TC

Objects

9 total

Object Name	Syntax	OID
netscreenSetDhcpMibModuleThis module defines the object that are used to monitor all the configuration info MODULE-IDENTITY `.1.3.6.1.4.1.3224.7.0.5`	MODULE-IDENTITY	`.1.3.6.1.4.1.3224.7.0.5`
nsSetDHCP OBJECT IDENTIFIER `.1.3.6.1.4.1.3224.7.5`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3224.7.5`
nsSetDhcpTableNetScreen ScreenOS can allow dhcp service on each of NetScreen device's physical interface. This table collects the dhcp configuration on each physical interface. SEQUENCE OF NsSetDhcpEntry `.1.3.6.1.4.1.3224.7.5.1`	SEQUENCE OF NsSetDhcpEntry	`.1.3.6.1.4.1.3224.7.5.1`
nsSetDhcpEntryHold the firewall setting attribute. NsSetDhcpEntry `.1.3.6.1.4.1.3224.7.5.1.1`	NsSetDhcpEntry	`.1.3.6.1.4.1.3224.7.5.1.1`
nsSetDhcpIfIdxunique interface id.ro Integer32 `.1.3.6.1.4.1.3224.7.5.1.1.1`	Integer32	`.1.3.6.1.4.1.3224.7.5.1.1.1`
nsSetDHCPServiceDHCP service type for trusted network.ro Enumeration `.1.3.6.1.4.1.3224.7.5.1.1.2`	Enumeration	`.1.3.6.1.4.1.3224.7.5.1.1.2`
nsSetDHCPRelayServerDHCP relay agent server name.ro DisplayString `.1.3.6.1.4.1.3224.7.5.1.1.3`	DisplayString	`.1.3.6.1.4.1.3224.7.5.1.1.3`
nsSetDHCPVpnEncrypSecure DHCP relay agent traffic via VPN encryption.ro Enumeration `.1.3.6.1.4.1.3224.7.5.1.1.4`	Enumeration	`.1.3.6.1.4.1.3224.7.5.1.1.4`
nsSetDhcpIfInfoInternal id assigned to this interface. Stays persistent across resets.ro Integer32 `.1.3.6.1.4.1.3224.7.5.1.1.5`	Integer32	`.1.3.6.1.4.1.3224.7.5.1.1.5`

More MIBs from Netscreen

Browse all NetscreenMIBs →

NETSCREEN-VR-OSPF-MIB

SNMP MIB module

157 objects→

NETSCREEN-OSPF-MIB

The NETSCREEN-OSPF-MIB provides SNMP access to monitor and manage Juniper NetScreen firewall instances running OSPF Version 2, exposing critical routing metrics such as neighbor adjacency states, interface link costs, and LSDB synchronization status for troubleshooting dynamic routing convergence.

SNMP MIB module

SNMP MIB module

NETSCREEN-INTERFACE-MIB

The NETSCREEN-INTERFACE-MIB provides SNMP access to monitor and manage interface configuration parameters, including status, speed, duplex settings, and traffic statistics, specifically for Juniper Networks NetScreen firewall appliances.

61 objects→

NETSCREEN-BGP4-MIB

The NETSCREEN-BGP4-MIB module enables monitoring and management of Border Gateway Protocol (BGP) session states, neighbor relationships, and routing table statistics on Juniper NetScreen firewalls. It provides specific counters and gauges for BGP-4 protocol events, including peer state transitions, route advertisements, and error conditions within the device's routing engine.

53 objects→