NETSCREEN-SERVICE-MIB
The NETSCREEN-SERVICE-MIB enables SNMP-based monitoring and management of service configuration parameters on Juniper NetScreen firewalls, specifically tracking defined service objects, protocol ports, and associated policy bindings.
Imported Objects
Objects
26 total| Object Name |
|---|
netscreenServiceMibModuleThis module defines the object that are used to monitor service configuration in NetScreen device. MODULE-IDENTITY .1.3.6.1.4.1.3224.13.0 |
nsServiceTableServices are types of IP traffic for which protocol standards exist. This table collects all the service configurations existing in NetScreen device. SEQUENCE OF NsServiceEntry .1.3.6.1.4.1.3224.13.1 |
nsServiceEntryEach enry in the nsServiceTable holds a set of configuration parameters associated with an instance of service. NsServiceEntry .1.3.6.1.4.1.3224.13.1.1 |
nsServiceIndexA unique value for each address. Its value ranges between 0 and 65535 and may not be contiguous.ro Integer32 .1.3.6.1.4.1.3224.13.1.1.1 |
nsServiceNameService name.ro DisplayString .1.3.6.1.4.1.3224.13.1.1.2 |
nsServiceCategoryCategory this service belongs to.ro Enumeration .1.3.6.1.4.1.3224.13.1.1.3 |
nsServiceTransProtoService trans protocol. 6 means tcp 17 means udpro Enumeration .1.3.6.1.4.1.3224.13.1.1.4 |
nsServiceSrcPortLowThe low source port number associated with service.ro Integer32 .1.3.6.1.4.1.3224.13.1.1.5 |
nsServiceSrcPortHighThe high source port number associated with service.ro Integer32 .1.3.6.1.4.1.3224.13.1.1.6 |
nsServiceDstPortLowThe low destination port number associated with service.ro Integer32 .1.3.6.1.4.1.3224.13.1.1.7 |
nsServiceDstPortHighThe high source port number associated with service.ro Integer32 .1.3.6.1.4.1.3224.13.1.1.8 |
nsServiceFlagService flag used to indicate if the service is a pre-defined one or a custom one.ro Enumeration .1.3.6.1.4.1.3224.13.1.1.9 |
nsServiceVsysVirtual system this configuration belongs to.ro Integer32 .1.3.6.1.4.1.3224.13.1.1.10 |
nsServiceGroupTableServices can be organized into service group for convenience. This table collects all service group entries in NetScreen device. SEQUENCE OF NsServiceGroupEntry .1.3.6.1.4.1.3224.13.2 |
nsServiceGroupEntryEach entry in the nsServiceGroupTable holds a set of information about service group. NsServiceGroupEntry .1.3.6.1.4.1.3224.13.2.1 |
nsServiceGroupIndexA unique value for each group. Its value ranges between 0 and 65535 and may not be contiguous.ro Integer32 .1.3.6.1.4.1.3224.13.2.1.1 |
nsServiceGroupNameService group name.ro DisplayString .1.3.6.1.4.1.3224.13.2.1.2 |
nsServiceGroupMemberService member number in service group.ro Integer32 .1.3.6.1.4.1.3224.13.2.1.3 |
nsServiceGroupCommentComments for service group.ro DisplayString .1.3.6.1.4.1.3224.13.2.1.4 |
nsServiceGroupVsysVirtual system this group belongs to.ro Integer32 .1.3.6.1.4.1.3224.13.2.1.5 |
nsServiceGrpMemberTableService group membership info table will show detail information of a service group. SEQUENCE OF NsServiceGrpMemberEntry .1.3.6.1.4.1.3224.13.3 |
nsServiceGrpMemberEntryAn entry containing attributes service group's member info NsServiceGrpMemberEntry .1.3.6.1.4.1.3224.13.3.1 |
nsServiceGrpMemberIndexA unique value for each group. Its value ranges between 0 and 65535 and may not be contiguous.ro Integer32 .1.3.6.1.4.1.3224.13.3.1.1 |
nsServiceGrpNameSpecific service group namero DisplayString .1.3.6.1.4.1.3224.13.3.1.2 |
nsServiceGroupMemberNameSpecific service name in the service group.ro DisplayString .1.3.6.1.4.1.3224.13.3.1.3 |
nsServiceGroupMemberVsysVirtual system this configuration belongs toro Integer32 .1.3.6.1.4.1.3224.13.3.1.4 |
More MIBs from Netscreen
Browse all NetscreenMIBs →SNMP MIB module
The NETSCREEN-OSPF-MIB provides SNMP access to monitor and manage Juniper NetScreen firewall instances running OSPF Version 2, exposing critical routing metrics such as neighbor adjacency states, interface link costs, and LSDB synchronization status for troubleshooting dynamic routing convergence.
SNMP MIB module
SNMP MIB module
The NETSCREEN-INTERFACE-MIB provides SNMP access to monitor and manage interface configuration parameters, including status, speed, duplex settings, and traffic statistics, specifically for Juniper Networks NetScreen firewall appliances.
The NETSCREEN-BGP4-MIB module enables monitoring and management of Border Gateway Protocol (BGP) session states, neighbor relationships, and routing table statistics on Juniper NetScreen firewalls. It provides specific counters and gauges for BGP-4 protocol events, including peer state transitions, route advertisements, and error conditions within the device's routing engine.