Home/Catalog/NETSCREEN-QOS-MIB

NETSCREEN-QOS-MIB

This module defines the object that are used to monitor QoS

Main OID:

netscreenQosMibModule.1.3.6.1.4.1.3224.5.0

Objects

Active

Status

Dependencies

Imported Objects

NETSCREEN-SMI

SNMPv2-SMI

Objects

13 total

Object Name	Syntax	OID
netscreenQosMibModuleThis module defines the object that are used to monitor QoS MODULE-IDENTITY `.1.3.6.1.4.1.3224.5.0`	MODULE-IDENTITY	`.1.3.6.1.4.1.3224.5.0`
nsQosUsrShapingModeQoS mode set by userro Enumeration `.1.3.6.1.4.1.3224.5.1`	Enumeration	`.1.3.6.1.4.1.3224.5.1`
nsQosSysShapingModeQoS mode currently set by the systemro Enumeration `.1.3.6.1.4.1.3224.5.2`	Enumeration	`.1.3.6.1.4.1.3224.5.2`
nsQosPly OBJECT IDENTIFIER `.1.3.6.1.4.1.3224.5.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.3224.5.3`
nsQosPlyTableQoS is the allocation of the appropriate amount of network bandwidth to every user and application on an interface. This table collects all the QoS configuration setting on each physical interface. SEQUENCE OF NsQosPlyEntry `.1.3.6.1.4.1.3224.5.3.1`	SEQUENCE OF NsQosPlyEntry	`.1.3.6.1.4.1.3224.5.3.1`
nsQosPlyEntryEach entry holds a set of attributes for QoS NsQosPlyEntry `.1.3.6.1.4.1.3224.5.3.1.1`	NsQosPlyEntry	`.1.3.6.1.4.1.3224.5.3.1.1`
nsQosPlyIdA unique policy id, also used as table index.ro Integer32 `.1.3.6.1.4.1.3224.5.3.1.1.1`	Integer32	`.1.3.6.1.4.1.3224.5.3.1.1.1`
nsQosPlyVsysVSYS this policy belongs to.ro Integer32 `.1.3.6.1.4.1.3224.5.3.1.1.2`	Integer32	`.1.3.6.1.4.1.3224.5.3.1.1.2`
nsQosPlyQosEnableEnable QoS on this policy.ro Enumeration `.1.3.6.1.4.1.3224.5.3.1.1.3`	Enumeration	`.1.3.6.1.4.1.3224.5.3.1.1.3`
nsQosPlyGanBWGuaranteed Bandwidth (in bytes per second). When Qos Enable is off, the value has no meaning.ro Integer32 `.1.3.6.1.4.1.3224.5.3.1.1.4`	Integer32	`.1.3.6.1.4.1.3224.5.3.1.1.4`
nsQosPlyMaxBWMaxium Bandwidth (in bytes per second). When Qos Enable is off, the value has no meaning. Negative value means it is not set yet.ro Integer32 `.1.3.6.1.4.1.3224.5.3.1.1.5`	Integer32	`.1.3.6.1.4.1.3224.5.3.1.1.5`
nsQosPlyTraffPriorityTraffic priority for this policy. Zero is the highest priority and seven is the lowest.ro Integer32 `.1.3.6.1.4.1.3224.5.3.1.1.6`	Integer32	`.1.3.6.1.4.1.3224.5.3.1.1.6`
nsQosPlyDSEnableEnable DiffServ codepoint marking on this policy.ro Enumeration `.1.3.6.1.4.1.3224.5.3.1.1.7`	Enumeration	`.1.3.6.1.4.1.3224.5.3.1.1.7`

More MIBs from Netscreen

Browse all NetscreenMIBs →

NETSCREEN-VR-OSPF-MIB

SNMP MIB module

157 objects→

NETSCREEN-OSPF-MIB

The NETSCREEN-OSPF-MIB provides SNMP access to monitor and manage Juniper NetScreen firewall instances running OSPF Version 2, exposing critical routing metrics such as neighbor adjacency states, interface link costs, and LSDB synchronization status for troubleshooting dynamic routing convergence.

SNMP MIB module

SNMP MIB module

NETSCREEN-INTERFACE-MIB

The NETSCREEN-INTERFACE-MIB provides SNMP access to monitor and manage interface configuration parameters, including status, speed, duplex settings, and traffic statistics, specifically for Juniper Networks NetScreen firewall appliances.

61 objects→

NETSCREEN-BGP4-MIB

The NETSCREEN-BGP4-MIB module enables monitoring and management of Border Gateway Protocol (BGP) session states, neighbor relationships, and routing table statistics on Juniper NetScreen firewalls. It provides specific counters and gauges for BGP-4 protocol events, including peer state transitions, route advertisements, and error conditions within the device's routing engine.

53 objects→