NETGEAR-ROUTE-POLICY-MIB
AI MIB Summary
The NETGEAR-ROUTE-POLICY-MIB provides SNMP management access to configure and monitor route policy rules, including static routes, route maps, and policy-based routing (PBR) attributes on NETGEAR enterprise routing hardware. This module enables the retrieval of policy match criteria, action definitions, and associated interface bindings to enforce traffic steering and routing precedence.
The MIB definitions for Route Policy system.
Main OID:
fastPathRoutePolicy.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20
29
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
fastPathRoutePolicyThe MIB definitions for Route Policy system. MODULE-IDENTITY .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20 |
fastpathRoutePolicyNameTableTable to configure or fetch current list of route-map statements SEQUENCE OF FastpathRoutePolicyNameEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1 |
fastpathRoutePolicyNameEntryEach entry in this table corresponds to a route-map statement FastpathRoutePolicyNameEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1.1 |
fastpathRoutePolicyNameThe name of a Route Map statement.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1.1.1 |
fastpathRoutePolicyStmtActionTypeThe action associated with this route-map statement.
This can be either Permit/Denyrw FastpathRoutePolicyAction .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1.1.2 |
fastpathRoutePolicySequenceRoute Maps are linked together using sequence numbers.
All Route Maps with the same index and with different
sequence numbers are linked together and processed in
order of increasing sequence number.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1.1.3 |
fastpathRoutePolicyNameRowStatusControls creation and deletion of Row Status entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1.1.4 |
fastpathRoutePolicyStamentTableTable to configure match or set statements in a route-map statement. SEQUENCE OF FastpathRoutePolicyStatementEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2 |
fastpathRoutePolicyStatementEntryEach entry describes match and set terms in a route-map statement if configured FastpathRoutePolicyStatementEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1 |
fastpathRoutePolicyStmtNameThe name of a Route Map. DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.1 |
fastpathRoutePolicyStmtSeqNumRoute Maps are linked together using sequence numbers.
All Route Maps with the same index and with different
sequence numbers are linked together and processed in
order of increasing sequence number. Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.2 |
fastpathRoutePolicyStmtActionThe action associated with this route-map statement.
This can be either Permit/Deny FastpathRoutePolicyAction .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.3 |
fastpathRoutePolicyStmtMatchIpv4AclListThe string containing a list of IPv4 ACLs. This
list contains either IPV4 standard ACL/IPV4 extended
ACL/ named IPv4 ACL. In a single match statement,
up to a maximum of 16 IPV4 ACLs can be included.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.4 |
fastpathRoutePolicyStmtMatchIpv4AclDelListThe string containing a list of IPv4 ACLs. This
list contains either IPV4 standard ACL/IPV4 extended
ACL/ named IPv4 ACL. In a single match statement,
up to a maximum of 16 IPV4 ACLs can be included.This
list is used to delete already configured match list
of IPv4 ACLs in route-map statement.Earlier this list
should have configured through MIB object
fastpathRoutePolicyStmtMatchIpv4AclListrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5 |
fastpathRoutePolicyStmtMatchMacAclListThe string containing a list of MAC ACLs. This
list contains upto 16 MAC ACL names that can be
included in a match statement.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.6 |
fastpathRoutePolicyStmtMatchMacAclDelListThe string containing a list of MAC ACLs. This
list contains upto 16 MAC ACL names that can be
included in a match statement. This MIB object is
used to delete MAC ACL lists matched in a route-map
statement via fastpathRoutePolicyStmtMatchMacAclList.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.7 |
fastpathRoutePolicyStmtMatchPacketLengthRangeMinMinimum value in the packet length range in a match
length term. A value of zero is used to disable/remove
minimum length configuration.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.8 |
fastpathRoutePolicyStmtMatchPacketLengthRangeMaxMaximum value in the packet length range in a match
length term. A value of zero is used to disable/remove
maximum length configuration.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.9 |
fastpathRoutePolicyStmtSetIpNextHopListThe string containing a list of next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specifiedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.10 |
fastpathRoutePolicyStmtSetIpNextHopDelListThe string containing a list of next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified.This
MIB object is used to delete IP next-hop list configured
via fastpathRoutePolicyStmtSetIpNextHopListrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.11 |
fastpathRoutePolicyStmtSetDefaultIpNextHopListThe string containing a list of default next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specifiedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.12 |
fastpathRoutePolicyStmtSetDefaultIpNextHopDelListThe string containing a list of default next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified.This MIB
object is used to delete IP default next-hop list configured
via fastpathRoutePolicyStmtSetDefaultIpNextHopListrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.13 |
fastpathRoutePolicyStmtSetIpPrecedenceIP Precedence value to be remarked. This is specified through
set clause in route-map statement. In order to remove configured precedence value,
use invalid(8) option.rw FastpathRoutePolicyStmtIpPrecedence .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.14 |
fastpathRoutePolicyStmtSetIntfNull0Specifying null0 as an interface in a route-map
statementrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.15 |
fastpathRoutePolicyIfTableA table of interfaces on which route-map is applied. SEQUENCE OF FastpathRoutePolicyIfEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.3 |
fastpathRoutePolicyIfEntry FastpathRoutePolicyIfEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.3.1 |
fastpathRoutePolicyIfIndexInterface to which route-map needs to be applied or Interface from which route-map needs to be removed.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.3.1.1 |
fastpathRoutePolicyIfNameThe name of a Route Map.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.3.1.2 |
fastpathRoutePolicyIfRowStatusControls creation and deletion of Row Status entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.3.1.3 |