MWRM-UNIT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MWRM-UNIT-MIB.
651
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
651 total| Object Name |
|---|
microwave-radio OBJECT IDENTIFIER .1.3.6.1.4.1.2281 |
SNMPv2-TC Unknown .1.3.6.1.4.1.2281 |
genEquip OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10 |
genEquipUnit OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1 |
genEquipUnitInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.1 |
genEquipLastCfgTimeStampThis parameter represents the configuration change counter.
On every conf. change this counter is increased by 1.ro INTEGER .1.3.6.1.4.1.2281.10.1.1.1 |
genEquipRealTimeandDateThis parameter specifies the real time and date
Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
A date-time specification:
field octets contents range
-
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT
would be displayed as: 07 c8 05 1a 0d 1e 0f 00
(1992 -5 -26, 13:30:15 )rw OCTET STRING .1.3.6.1.4.1.2281.10.1.1.2 |
genEquipPMGenTimeThis value indicates the generation time of the Performance Monitor file.
The value is presented in time_t format.ro INTEGER .1.3.6.1.4.1.2281.10.1.1.3 |
genEquipInvGenTimeThis value indicates the generation time of the Inventory information file.
The inventory file holds the configuration information of the unit.
The value is presented in time_t format.ro INTEGER .1.3.6.1.4.1.2281.10.1.1.4 |
genEquipOperationEnables to perform HW reset to the indoor unit.rw Enumeration .1.3.6.1.4.1.2281.10.1.1.5 |
genEquipMIBVersionThis value indicates MIB version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.1.6 |
genEquipUnitCLLIThis value represents a general purpose CLLI-like text field.
The CLLI field is attached to traps generated from this NE.rw DisplayString .1.3.6.1.4.1.2281.10.1.1.7 |
genEquipUnitMeasurementSystemThis value represents the measurement system used by the system. (metric or imperal).rw MetricImperial .1.3.6.1.4.1.2281.10.1.1.8 |
genEquipUnitIduTemperatureThis value indicates the IDU temperature, according to the measurement system chosen.
(genEquipUnitMeasurementSystem)ro INTEGER .1.3.6.1.4.1.2281.10.1.1.9 |
genEquipUnitIduVoltageInputVoltages Input.ro INTEGER .1.3.6.1.4.1.2281.10.1.1.10 |
genEquipUnitInfoTime OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.1.11 |
genEquipUnitGMTHoursThis parameter represent the offset in hours from GMT.rw INTEGER (-12..13) .1.3.6.1.4.1.2281.10.1.1.11.1 |
genEquipUnitGMTMinsThis parameter represents the offset in minutes from GMT.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.2 |
genEquipUnitInfoNTP OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.1.11.6 |
genEquipUnitInfoNTPAdminThis parameter represents the NTP Admin staterw EnableDisable .1.3.6.1.4.1.2281.10.1.1.11.6.1 |
genEquipUnitInfoNTPServerIPThis parameter represents the IP address of the NTP Serverrw IpAddress .1.3.6.1.4.1.2281.10.1.1.11.6.2 |
genEquipUnitInfoNTPStatusThis parameter represents the NTP Service statusro Enumeration .1.3.6.1.4.1.2281.10.1.1.11.6.3 |
genEquipUnitInfoNTPSyncThis parameter returns the IP address of the NTP server, with which the system is currently synchronized.
Returned strings:
(i) - the IP address of the reference NTP server, according to IPv4/v6 format.
(ii) - 'LOCAL' if synchronized on local clock.
(iii) - 'N/A' if not synchronized. Valid only when admin is 'disabled'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.1.11.6.4 |
genEquipUnitInfoNTPPollIntervalThis parameter represents the NTP polling interval in minutesro INTEGER .1.3.6.1.4.1.2281.10.1.1.11.6.5 |
genEquipUnitInfoNtpStatusTableThis table shows the status of the NTP (Network Time Protocol). SEQUENCE OF GenEquipUnitInfoNtpStatusEntry .1.3.6.1.4.1.2281.10.1.1.11.6.6 |
genEquipUnitInfoNtpStatusEntryEntry containing the data of the NTP status. GenEquipUnitInfoNtpStatusEntry .1.3.6.1.4.1.2281.10.1.1.11.6.6.1 |
genEquipUnitInfoNtpStatusIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.2281.10.1.1.11.6.6.1.1 |
genEquipUnitInfoNtpStatusPollIntervalIndicates the time interval in minutes in which the NTP client polls the server it is locked to.ro INTEGER .1.3.6.1.4.1.2281.10.1.1.11.6.6.1.2 |
genEquipUnitInfoNtpStatusSyncServerIPhe IPv4 address of the NTP server that the client is currently locked on.ro IpAddress .1.3.6.1.4.1.2281.10.1.1.11.6.6.1.3 |
genEquipUnitInfoNtpStatusLockStateIndicates the NTP client lock status.ro Enumeration .1.3.6.1.4.1.2281.10.1.1.11.6.6.1.4 |
genEquipUnitInfoNtpConfigTableThis table allows the configuration of the NTP (Network Time Protocol). SEQUENCE OF GenEquipUnitInfoNtpConfigEntry .1.3.6.1.4.1.2281.10.1.1.11.6.7 |
genEquipUnitInfoNtpConfigEntryEntry containing the data of the NTP configuration. GenEquipUnitInfoNtpConfigEntry .1.3.6.1.4.1.2281.10.1.1.11.6.7.1 |
genEquipUnitInfoNtpConfigIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.2281.10.1.1.11.6.7.1.1 |
genEquipUnitInfoNtpConfigAdminThe administrative state of the NTP (Network Time Protocol) feature.rw EnableDisable .1.3.6.1.4.1.2281.10.1.1.11.6.7.1.2 |
genEquipUnitInfoNtpConfigVersionThe NTP (Network Time Protocol) version that is being used.rw Enumeration .1.3.6.1.4.1.2281.10.1.1.11.6.7.1.3 |
genEquipUnitInfoNtpConfigServerIPaddress1NTP server IPv4 address that is required in first priority.rw IpAddress .1.3.6.1.4.1.2281.10.1.1.11.6.7.1.4 |
genEquipUnitInfoNtpConfigServerIPaddress2NTP server IPv4 address that is required in second priority.rw IpAddress .1.3.6.1.4.1.2281.10.1.1.11.6.7.1.5 |
genEquipUnitDaylightSavingTimeStartMonthThis parameter represents the start Month of the daylight saving time.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.7 |
genEquipUnitDaylightSavingTimeStartDayThis parameter represents the start Day of the daylight saving time.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.8 |
genEquipUnitDaylightSavingTimeEndMonthThis parameter represents the end month of the daylight saving time.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.9 |
genEquipUnitDaylightSavingTimeEndDayThis parameter represents the end day of the daylight saving time.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.10 |
genEquipUnitDaylightSavingTimeOffsetDaylight saving offset hours.
for a value different then '0', at the starting date of the daylight saving time
the time will jump forward in this value.
at the end date of the daylight saving time, the time will jump backwards in this value.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.11 |
genEquipUnitInfoTimeServicesTableThis table contains the time services properties. SEQUENCE OF GenEquipUnitInfoTimeServicesEntry .1.3.6.1.4.1.2281.10.1.1.11.12 |
genEquipUnitInfoTimeServicesEntryThis table entry contains the time services properties. GenEquipUnitInfoTimeServicesEntry .1.3.6.1.4.1.2281.10.1.1.11.12.1 |
genEquipUnitInfoTimeServicesIndexThe index of the table.ro INTEGER .1.3.6.1.4.1.2281.10.1.1.11.12.1.1 |
genEquipUnitInfoTimeServicesUtcHoursThe required hours offset relative to the UTC (Universal Time Coordinated).rw INTEGER (-12..13) .1.3.6.1.4.1.2281.10.1.1.11.12.1.2 |
genEquipUnitInfoTimeServicesUtcMinutesThe required minutes offset relative to the UTC (Universal Time Coordinated).rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.12.1.3 |
genEquipUnitInfoTimeServicesDstStartMonthThe month when the DST (Daylight Saving Time) is required to start.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.12.1.4 |
genEquipUnitInfoTimeServicesDstStartDayThe day when the DST (Daylight Saving Time) is required to start.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.12.1.5 |
genEquipUnitInfoTimeServicesDstEndMonthThe month when the DST (Daylight Saving Time) is required to end.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.12.1.6 |
genEquipUnitInfoTimeServicesDstEndDayThe day when the DST (Daylight Saving Time) is required to end.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.12.1.7 |
genEquipUnitInfoTimeServicesDstOffsetThe required offset for DST (Daylight Saving Time) in hours.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.12.1.8 |
genEquipUnitInfoTimeServicesUtcDateAndTimeUTC (Universal Time Coordinated) date and time.rw INTEGER .1.3.6.1.4.1.2281.10.1.1.11.12.1.9 |
genEquipUnitInfoTimeServicesUtcCurrentDateAndTimeThe calculated current local date & time based on the local clock, UTC and DST (Daylight Saving Time) configurations.ro INTEGER .1.3.6.1.4.1.2281.10.1.1.11.12.1.10 |
genEquipUnitIduPowerSupply1AlarmAdminThis parameter is relevant only for IDU with more than one power supply units.
The user can choose to disable (ignore the alarm) of one of the power supply units.rw EnableDisable .1.3.6.1.4.1.2281.10.1.1.12 |
genEquipUnitIduPowerSupply2AlarmAdminThis parameter is relevant only for IDU with more than two power supply units.
The user can choose to disable (ignore the alarm) of one of the power supply units.rw EnableDisable .1.3.6.1.4.1.2281.10.1.1.13 |
genEquipUnitInfoNG OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.1.14 |
genEquipUnitNameThe name of the system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.1.14.1 |
genEquipUnitDescriptionA ahort description of the system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.1.14.2 |
genEquipUnitContactPersonContact person.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.1.14.3 |
genEquipUnitLocationThe location of the system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.1.14.4 |
genEquipUnitLatitudeThe latitude of the system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.1.14.5 |
genEquipUnitLongitudeThe longitude of system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.1.14.6 |
genEquipUnitIpAddressTypeIP address Family.rw Enumeration .1.3.6.1.4.1.2281.10.1.1.14.7 |
genEquipUnitInfoNGTdmInterfaceStandardThe TDM interface standard: ETSI (Erupean) or ANSI (North American)rw Enumeration .1.3.6.1.4.1.2281.10.1.1.14.8 |
genEquipUnitInventory OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.2 |
genEquipUnitIDUSerialNumberIDU Serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.2.1 |
genEquipUnitIDUPartNumberIDU Part number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.2.2 |
genEquipUnitInventoryNG OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.2.10 |
genEquipInventoryTableinventory common table. SEQUENCE OF GenEquipInventoryEntry .1.3.6.1.4.1.2281.10.1.2.10.1 |
genEquipInventoryEntryinventory common table Entry. GenEquipInventoryEntry .1.3.6.1.4.1.2281.10.1.2.10.1.1 |
genEquipInventorySlotIndexslot index.ro INTEGER .1.3.6.1.4.1.2281.10.1.2.10.1.1.1 |
genEquipInventoryCardNameCard name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.2.10.1.1.2 |
genEquipInventoryCardTypeCard type.ro InventoryCardType .1.3.6.1.4.1.2281.10.1.2.10.1.1.3 |
genEquipInventoryCardSubTypeCard sub type.ro INTEGER .1.3.6.1.4.1.2281.10.1.2.10.1.1.4 |
genEquipInventoryPartNumberPart number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.2.10.1.1.5 |
genEquipInventorySerialNumberSerial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.2.10.1.1.6 |
genEquipInventoryNumberWorkingDaysNumber of working days.ro INTEGER .1.3.6.1.4.1.2281.10.1.2.10.1.1.7 |
genEquipUnitLicenseInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.3 |
genEquipUnitLicenseTypeThe unit license type.ro Enumeration .1.3.6.1.4.1.2281.10.1.3.1 |
genEquipUnitLicenseCodeThe user license code that determines the NE license rights.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.3.2 |
genEquipUnitACMLicenseThe ACM rights for the NE on the current licensero AllowedNotAllowed .1.3.6.1.4.1.2281.10.1.3.3 |
genEquipUnitSwitchAppLicenseThe switch application rights for the NE on the current license.
Switch is either managed-switch or metro switch.ro Enumeration .1.3.6.1.4.1.2281.10.1.3.4 |
genEquipUnitCapacityLicenseThe radio capacity allowed for the NE on the current licensero INTEGER .1.3.6.1.4.1.2281.10.1.3.5 |
genEquipUnitLicenseDemoAdminThe Admin state of the demo mode.rw EnableDisable .1.3.6.1.4.1.2281.10.1.3.6 |
genEquipUnitLicenseDemoTimerThe Demo timer in hoursro INTEGER .1.3.6.1.4.1.2281.10.1.3.7 |
genEquipUnitLicenseSyncUThis parameter indicates whether the synchronization unit license is allowed.
This license allows configuring synchronization sources for clock distribution.ro AllowedNotAllowed .1.3.6.1.4.1.2281.10.1.3.8 |
genEquipUnitLicenseNetworkResiliencyThis parameter indicates whether the network resiliency license is allowed.
This license allows configuring xSTP protocols and TDM path protection.ro AllowedNotAllowed .1.3.6.1.4.1.2281.10.1.3.9 |
genEquipUnitLicenseTDMCapacityThis parameter indicates the number of TDM trails per radio
allowed by the current license, if allowed.
When TDM capacity license is allowed all scripts are allowed in the radio.ro AllowedNotAllowed .1.3.6.1.4.1.2281.10.1.3.10 |
genEquipUnitLicenseTDMCapacityValueThis parameter indicates the number of TDM trails per radio
allowed by the current license, if relevant.
The TDM capacity value is not relevant if the genEquipUnitLicenseTDMCapacity is not allowed.ro INTEGER .1.3.6.1.4.1.2281.10.1.3.11 |
genEquipUnitLicensePerUsageThis parameter indicates whether the per-usage license is allowed.
This license allows configuring all features and causes their use to be reported to NMS.
If the usage license is allowed, all other licenses are not relevant, as all the licenses are open
for configuration.ro AllowedNotAllowed .1.3.6.1.4.1.2281.10.1.3.12 |
genEquipUnitLicenseAsymScriptsThis parameter indicates whether the asymmetrical scripts license is allowed.
This license allows loading asymmetrical scripts.ro AllowedNotAllowed .1.3.6.1.4.1.2281.10.1.3.13 |
genEquipUnitLicenseDateCodeThis parameter indicates the generation date and time of the current installed license. Format is 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).ro INTEGER .1.3.6.1.4.1.2281.10.1.3.14 |
genEquipUnitLicenseValidationNumberThis parameter indicates the validation number of the current installed license. It can be used as a proof (for LMS) that the license key was installed in order to get a downgrade refund.ro INTEGER .1.3.6.1.4.1.2281.10.1.3.15 |
genEquipUnitLicenseFeatureTableThis table shows for each feature what is its valid license and whether the license has been violated or not. SEQUENCE OF GenEquipUnitLicenseFeatureEntry .1.3.6.1.4.1.2281.10.1.3.16 |
genEquipUnitLicenseFeatureEntryThis table entry shows for each feature what is its valid license and whether the license has been violated or not. GenEquipUnitLicenseFeatureEntry .1.3.6.1.4.1.2281.10.1.3.16.1 |
genEquipUnitLicenseFeatureIdA unique number which indicates the Id of the featurero INTEGER .1.3.6.1.4.1.2281.10.1.3.16.1.1 |
genEquipUnitLicenseFeatureNameThe name of the feature.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.3.16.1.2 |
genEquipUnitLicenseFeatureDescriptionA short description of the feature.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.3.16.1.3 |
genEquipUnitLicenseFeatureIsUsedIndicates whether the licensed feature is actually in used or its quantity that currently is in use.ro LicenseGeneric .1.3.6.1.4.1.2281.10.1.3.16.1.4 |
genEquipUnitLicenseFeatureIsAllowedIndicates whether a licensed feature is allowed.ro LicenseGeneric .1.3.6.1.4.1.2281.10.1.3.16.1.5 |
genEquipUnitLicenseViolationStatusIndicates whether the actual configuration violates the feature license.ro Enumeration .1.3.6.1.4.1.2281.10.1.3.16.1.6 |
genEquipUnitLicenseCutThroughThis parameter indicates whether the cut-through license is allowed.
This license allows using the cut-through frames in the TM.ro AllowedNotAllowed .1.3.6.1.4.1.2281.10.1.3.20 |
genEquipUnitLicenseTdmInterfaceStandardThe TDM interface standard: ETSI (European) or ANSI (North American).ro Enumeration .1.3.6.1.4.1.2281.10.1.3.21 |
genEquipUnitExternalAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.4 |
genEquipUnitAlarmInput OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.4.1 |
genEquipUnitAlarmInputTableExternal input alarm table.
Using the table to manage the admin state of the external input alarm (Enable or Disable it).
Set a description and severity. SEQUENCE OF GenEquipUnitAlarmInputEntry .1.3.6.1.4.1.2281.10.1.4.1.1 |
genEquipUnitAlarmInputEntryExternal input alarm table.
Using the table to manage the admin state of the external input alarm (Enable or Disable it).
Set a description and severity. GenEquipUnitAlarmInputEntry .1.3.6.1.4.1.2281.10.1.4.1.1.1 |
genEquipUnitAlarmInputCounterExternal input alarm table index.ro INTEGER .1.3.6.1.4.1.2281.10.1.4.1.1.1.1 |
genEquipUnitAlarmInputAdminThe Admin state of the External input alarm table.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.1.4.1.1.1.2 |
genEquipUnitAlarmInputTextExternal input alarm description.rw DisplayString .1.3.6.1.4.1.2281.10.1.4.1.1.1.3 |
genEquipUnitAlarmInputSeverityExternal input alarm severity.rw InputSeverity .1.3.6.1.4.1.2281.10.1.4.1.1.1.4 |
genEquipUnitAlarmInputStateThe state, raised or cleared, of the external alarm input.ro OffOn .1.3.6.1.4.1.2281.10.1.4.1.1.1.5 |
genEquipUnitAlarmOutput OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.4.2 |
genEquipUnitAlarmOutputTableExternal output alarm table. using the table to manage the admin state of the external input alarm
, read the status and set an output group. SEQUENCE OF GenEquipUnitAlarmOutputEntry .1.3.6.1.4.1.2281.10.1.4.2.1 |
genEquipUnitAlarmOutputEntryExternal output alarm table. using the table to manage the admin state of the external input alarm
, read the status and set an output group. GenEquipUnitAlarmOutputEntry .1.3.6.1.4.1.2281.10.1.4.2.1.1 |
genEquipUnitAlarmOutputCounterExternal output alarm table index.ro INTEGER .1.3.6.1.4.1.2281.10.1.4.2.1.1.1 |
genEquipUnitAlarmOutputAdminThe Admin state of the External output alarm. When 'Enabled', the functionality will be:
(i) If no alarms are raised, the N.O. (normally open) contact will be opened,
while the N.C. (normally closed) contact will be connected to the COM contact.
(ii) When an alarm is raised, or the system power is OFF,
the N.O will be connected to the COM contact, while the N.C. contact will remain opened.
When 'Test' option is selected, the dry contacts behave as an alarm is raised in the system,
as described in case (ii) above.rw Enumeration .1.3.6.1.4.1.2281.10.1.4.2.1.1.2 |
genEquipUnitAlarmOutputStatusThe current stauts of the External output alarm table.ro Enumeration .1.3.6.1.4.1.2281.10.1.4.2.1.1.3 |
genEquipUnitAlarmOutputGroupThe description of the group to which the external output alarm belongs.rw Enumeration .1.3.6.1.4.1.2281.10.1.4.2.1.1.4 |
genEquipUnitShelf OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.5 |
genEquipUnitShelfInstallationThis value indicates the NE installation type (standalone or module/card within a chassis).ro Enumeration .1.3.6.1.4.1.2281.10.1.5.1 |
genEquipUnitShelfModuleRoleThis value indicates the NE module role (main unit or extention).ro Enumeration .1.3.6.1.4.1.2281.10.1.5.2 |
genEquipUnitShelfSlotLabelSlot label is a user defined description for the module in the slot.rw DisplayString .1.3.6.1.4.1.2281.10.1.5.3 |
genEquipUnitShelfArchivesOperationStatusShelf-wide configuration archives [backup/restore] operation status.
Used also when creating archive for unit info.
Relevant only for main units.
- ready(0)
- inProgress(1),
- success(2),
- failure(3)ro ProgressStatus .1.3.6.1.4.1.2281.10.1.5.4 |
genEquipUnitShelfManagmentTableThis table contains information about the IDUs that may be in the shelf (population, communication status, most severe alarm) and
provides the ability to backup/restore SW for each IDU.
Relevant only for main units. SEQUENCE OF GenEquipUnitShelfManagmentEntry .1.3.6.1.4.1.2281.10.1.5.5 |
genEquipUnitShelfManagmentEntryThis table keeps the shelf information on all the modules in the shelf (population, status, most severe alarm) and
provides the ability for backup/restore command or SW download.
Relevant only for main units. GenEquipUnitShelfManagmentEntry .1.3.6.1.4.1.2281.10.1.5.5.1 |
genEquipUnitShelfManagmentSlotThis value is the slot number used as an index for this table.ro SlotId .1.3.6.1.4.1.2281.10.1.5.5.1.1 |
genEquipUnitShelfManagmentSlotPopulationSlot population state, which indicates if the slot is occupied or not.
Relevant only for main units.ro Enumeration .1.3.6.1.4.1.2281.10.1.5.5.1.2 |
genEquipUnitShelfManagmentCommunicationStatusThis value indicates if the slot can be reached or not.
Relevant only for main units.ro Enumeration .1.3.6.1.4.1.2281.10.1.5.5.1.3 |
genEquipUnitShelfManagmentSlotMostSevereAlarmThis value is the most severe alarm for the module on this slot.
Relevant only for main unit.ro Severity .1.3.6.1.4.1.2281.10.1.5.5.1.4 |
genEquipUnitShelfManagmentMngSwCommandThe command to be executed to manage SW versions.
Relevant only for main units.
Possible values are:
- noOperation(0)
- downloadUpgradeVersion(1)
- upgrade(2)
- rollback(3)
- downgrade(4)
- downloadDowngradeVersion(5)rw SwCommand .1.3.6.1.4.1.2281.10.1.5.5.1.5 |
genEquipUnitShelfManagmentSlotResetThis parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index.rw OffOn .1.3.6.1.4.1.2281.10.1.5.5.1.6 |
genEquipUnitShelfManagmentSlotIpSlot SNMP Management IP address.rw IpAddress .1.3.6.1.4.1.2281.10.1.5.5.1.7 |
genEquipUnitShelfResetThis parameter allows resetting of entire shelf.rw OffOn .1.3.6.1.4.1.2281.10.1.5.6 |
genEquipUnitshelfAllODUAdminThe unit is configured as all outdoor unit, enable or disable it.rw EnableDisable .1.3.6.1.4.1.2281.10.1.5.7 |
genEquipUnitShelfSlotConfigTableSlot configuration table. SEQUENCE OF GenEquipUnitShelfSlotConfigEntry .1.3.6.1.4.1.2281.10.1.5.8 |
genEquipUnitShelfSlotConfigEntryThis table allows configuration of card population parameters. GenEquipUnitShelfSlotConfigEntry .1.3.6.1.4.1.2281.10.1.5.8.1 |
genEquipUnitShelfSlotConfigSlotIDThis value is the slot number used as an index for this table.ro SlotId .1.3.6.1.4.1.2281.10.1.5.8.1.1 |
genEquipUnitShelfSlotConfigExpectedCardTypeExpected card type in current slot.rw InventoryCardType .1.3.6.1.4.1.2281.10.1.5.8.1.2 |
genEquipUnitShelfSlotConfigLabelSlot label.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.5.8.1.3 |
genEquipUnitShelfSlotConfigAdminSlot admin state.rw EnableDisable .1.3.6.1.4.1.2281.10.1.5.8.1.4 |
genEquipUnitShelfSlotConfigSlotResetThis parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index.rw OffOn .1.3.6.1.4.1.2281.10.1.5.8.1.5 |
genEquipUnitShelfTccConfigTableTCC configuration table. SEQUENCE OF GenEquipUnitShelfTccConfigEntry .1.3.6.1.4.1.2281.10.1.5.9 |
genEquipUnitShelfTccConfigEntryThis table allows configuration of TCC population parameters. GenEquipUnitShelfTccConfigEntry .1.3.6.1.4.1.2281.10.1.5.9.1 |
genEquipUnitShelfTccConfigSlotIDThis value is the TCC slot number used as an index for this table.ro SlotId .1.3.6.1.4.1.2281.10.1.5.9.1.1 |
genEquipUnitShelfTccConfigExpectedCardTypeExpected card type in current TCC slot.rw InventoryCardType .1.3.6.1.4.1.2281.10.1.5.9.1.2 |
genEquipUnitShelfTccConfigLabelTCC label.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.5.9.1.3 |
genEquipUnitShelfTccConfigAdminTCC admin state.rw EnableDisable .1.3.6.1.4.1.2281.10.1.5.9.1.4 |
genEquipUnitShelfTccConfigResetThis parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index.rw OffOn .1.3.6.1.4.1.2281.10.1.5.9.1.5 |
genEquipUnitShelfSlotStatusTableThis table contains information about the status of the cards currently inserted in the system. SEQUENCE OF GenEquipUnitShelfSlotStatusEntry .1.3.6.1.4.1.2281.10.1.5.10 |
genEquipUnitShelfSlotStatusEntryThis table entry contains information about the status of the cards currently inserted in the system. GenEquipUnitShelfSlotStatusEntry .1.3.6.1.4.1.2281.10.1.5.10.1 |
genEquipUnitShelfSlotStatusSlotIDSlot where PW-LIC is inserted.ro SlotId .1.3.6.1.4.1.2281.10.1.5.10.1.1 |
genEquipUnitShelfSlotStatusOccupancySlot Occupancy.ro CardOccupancy .1.3.6.1.4.1.2281.10.1.5.10.1.2 |
genEquipUnitShelfSlotStatusAllowedCardTypesshelf slot allowed card types.ro Counter64 .1.3.6.1.4.1.2281.10.1.5.10.1.3 |
genEquipUnitShelfSlotStatusCardTypeShelf Slot card type.ro InventoryCardType .1.3.6.1.4.1.2281.10.1.5.10.1.4 |
genEquipUnitShelfSlotStatusOperationalStateOperational State.ro OperState .1.3.6.1.4.1.2281.10.1.5.10.1.5 |
genEquipUnitShelfSlotStatusCommunicationSlot Operational State.ro DownUp .1.3.6.1.4.1.2281.10.1.5.10.1.6 |
genEquipUnitShelfTccStatusTableThis table contains information about the status of the TCC currently inserted in the system. SEQUENCE OF GenEquipUnitShelfTccStatusEntry .1.3.6.1.4.1.2281.10.1.5.11 |
genEquipUnitShelfTccStatusEntryThis table entry contains information about the status of the TCC currently inserted in the system. GenEquipUnitShelfTccStatusEntry .1.3.6.1.4.1.2281.10.1.5.11.1 |
genEquipUnitShelfTccStatusSlotIDSlot where PW-LIC is inserted.ro SlotId .1.3.6.1.4.1.2281.10.1.5.11.1.1 |
genEquipUnitShelfTccStatusOccupancySlot Occupancy.ro CardOccupancy .1.3.6.1.4.1.2281.10.1.5.11.1.2 |
genEquipUnitShelfTccStatusAllowedCardTypesshelf slot allowed card types.ro Counter64 .1.3.6.1.4.1.2281.10.1.5.11.1.3 |
genEquipUnitShelfTccStatusCardTypeShelf Slot card type.ro InventoryCardType .1.3.6.1.4.1.2281.10.1.5.11.1.4 |
genEquipUnitShelfTccStatusOperationalStateOperational State.ro OperState .1.3.6.1.4.1.2281.10.1.5.11.1.5 |
genEquipUnitShelfTccStatusCommunicationSlot Operational State.ro DownUp .1.3.6.1.4.1.2281.10.1.5.11.1.6 |
genEquipUnitShelfManagmentSeverityTableThis table indicates the number of current raised alarms per slot. SEQUENCE OF GenEquipUnitShelfManagmentSeverityEntry .1.3.6.1.4.1.2281.10.1.5.12 |
genEquipUnitShelfManagmentSeverityEntryThis table entry indicates the number of current raised alarms per slot. GenEquipUnitShelfManagmentSeverityEntry .1.3.6.1.4.1.2281.10.1.5.12.1 |
genEquipUnitShelfManagmentSeveritySlotThe slot ID number that identifies it.ro INTEGER .1.3.6.1.4.1.2281.10.1.5.12.1.1 |
genEquipUnitShelfManagmentSeverityCriticalThe number of alarms with 'Critical' severity.ro INTEGER .1.3.6.1.4.1.2281.10.1.5.12.1.2 |
genEquipUnitShelfManagmentSeverityMajorThe number of alarms with 'Major' severity.ro INTEGER .1.3.6.1.4.1.2281.10.1.5.12.1.3 |
genEquipUnitShelfManagmentSeverityMinorThe number of alarms with 'Minor' severity.ro INTEGER .1.3.6.1.4.1.2281.10.1.5.12.1.4 |
genEquipUnitShelfManagmentSeverityWarningThe number of alarms with 'Warning' severity.ro INTEGER .1.3.6.1.4.1.2281.10.1.5.12.1.5 |
genEquipUnitShelfManagmentSeverityIndeterminateThe number of alarms with 'Indeterminate' severity.ro INTEGER .1.3.6.1.4.1.2281.10.1.5.12.1.6 |
genEquipUnitShelfPdcFanStatusTableThis table shows for fun card. SEQUENCE OF GenEquipUnitShelfPdcFanStatusEntry .1.3.6.1.4.1.2281.10.1.5.13 |
genEquipUnitShelfPdcFanStatusEntryThis table shows for fun card. GenEquipUnitShelfPdcFanStatusEntry .1.3.6.1.4.1.2281.10.1.5.13.1 |
genEquipUnitShelfPdcFanStatusPdcFanIdpdc-fan-idro INTEGER .1.3.6.1.4.1.2281.10.1.5.13.1.1 |
genEquipUnitShelfPdcFanStatusPdcFanExMonitorpdc-fan-existent monitor.rw EnableDisable .1.3.6.1.4.1.2281.10.1.5.13.1.2 |
genEquipUnitShelfPdcFanStatusPdcFanOccupancycard_occupancy.ro CardOccupancy .1.3.6.1.4.1.2281.10.1.5.13.1.3 |
genEquipUnitShelfPdcFanStatusPdcFanCardTypeIndicates whether the licensed feature is actually in used or its quantity that currently is in use.ro InventoryCardType .1.3.6.1.4.1.2281.10.1.5.13.1.4 |
genEquipUnitShelfAbcMuxTableThis table allows enabling/disabling each ABC MUX group.
ABC groups can be defined on top of these MUX. SEQUENCE OF GenEquipUnitShelfAbcMuxEntry .1.3.6.1.4.1.2281.10.1.5.14 |
genEquipUnitShelfAbcMuxEntryThis table entry allows enabling/disabling each ABC MUX group.
ABC groups can be defined on top of these MUX. GenEquipUnitShelfAbcMuxEntry .1.3.6.1.4.1.2281.10.1.5.14.1 |
genEquipUnitShelfAbcMuxNumberIdentifier for each of the possible MUXs which choose between using the ABC trunks
or the port for multi-directional radiosro INTEGER .1.3.6.1.4.1.2281.10.1.5.14.1.1 |
genEquipUnitShelfAbcMuxAdminEnables the MUX (for ABC) or disables it (for multi-directional radios).rw EnableDisable .1.3.6.1.4.1.2281.10.1.5.14.1.2 |
genEquipUnitShelfMultiplexTrafficSourceThe parameter multiplex traffic between slot 1 and slot 12.rw INTEGER .1.3.6.1.4.1.2281.10.1.5.23 |
genEquipUnitShelfMaskUnderVoltageAlarmFirstPowerFeedMask undervoltage alarm on 1st DC power feed.rw EnableDisable .1.3.6.1.4.1.2281.10.1.5.24 |
genEquipUnitShelfMaskUnderVoltageAlarmSecondPowerFeedMask undervoltage alarm on 2nd DC power feedrw EnableDisable .1.3.6.1.4.1.2281.10.1.5.25 |
genEquipProtection OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.6 |
genEquipProtectionAdminThe Admin mode of the protection.
In case of protection2Plus2Hsb this parameter should be configured in
the main and extension slots.rw Enumeration .1.3.6.1.4.1.2281.10.1.6.1 |
genEquipProtectionModeIn protection mode, the card can be either active or standbyro Enumeration .1.3.6.1.4.1.2281.10.1.6.2 |
genEquipProtectionMateIPAddrSame parameter as genEquipNetworkMateIp.
In case of 1+1 protection it is the protected card (Mate) IP address.
In case of 2+2 protection it is the IP address of the protected unit.ro IpAddress .1.3.6.1.4.1.2281.10.1.6.3 |
genEquipProtectionMateMACAddrIn case of 1+1 protection it is protected card (Mate) MAC address
In case of 2+2 protection it is the IP address of the protected unit.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2281.10.1.6.4 |
genEquipProtectionRadioExcessiveBERSwitchThe Admin state of an Excessive BER threshold. When enabled, crossing the Excessive BER threshold will cause
a protection switch.rw EnableDisable .1.3.6.1.4.1.2281.10.1.6.5 |
genEquipProtectionLockoutThis parameter provides the ability to lock the mode of each card in the protection,
meaning to force the fact that protection switch will not occur.rw OffOn .1.3.6.1.4.1.2281.10.1.6.6 |
genEquipProtectionForceSwitchThis parameter is a command that forces a protection switch regardless of the state of the standby card.rw OffOn .1.3.6.1.4.1.2281.10.1.6.7 |
genEquipProtectionManualSwitchThis parameter is a command that performs manaual protection switch.rw OffOn .1.3.6.1.4.1.2281.10.1.6.8 |
genEquipProtectionCopyToMateComandSetting this parameter to On will copy configured parameters from the active to the standby unit.rw OffOn .1.3.6.1.4.1.2281.10.1.6.9 |
genEquipProtectionCopyToMateStatusThis parameter represents the status of the copy-to-mate command when protection is enabled.
- ready(0)
- inProgress(1),
- success(2),
- failure(3)ro ProgressStatus .1.3.6.1.4.1.2281.10.1.6.10 |
genEquipProtectionMultiUnitLAGAdminThis parameter enables the Multi Unit LAG feature.
It can be activated only in Single Pipe configuration and only when protection is active (either 1+1 or 2+2).rw EnableDisable .1.3.6.1.4.1.2281.10.1.6.11 |
genEquipProtectionRevertiveAdminEnable/Disable revertive protection mode. In revertive protection mode one IDU will be defined as a Primary and the other will be Secondary.
Revertive protection will always tend to make the Primary IDU active unless it has a hardware failure.rw EnableDisable .1.3.6.1.4.1.2281.10.1.6.12 |
genEquipProtectionRevertivePrimaryIDUDecides whether upper or lower IDU will be primary. When placed in a shelf, the upper will be the upper slot in the shelf.
When working in stand-alone mode, the IDU with the highest IP address will be considered as upper.rw Enumeration .1.3.6.1.4.1.2281.10.1.6.13 |
genEquipProtectionRevertiveMinTimerMinimal revertive protection timer period.rw INTEGER .1.3.6.1.4.1.2281.10.1.6.14 |
genEquipProtectionRevertiveMaxNumOfTriesMaximal number of revertive protection tries. Used to prevent instability. Revertive protection will give up trying to switch
to the primary standby IDU path after the maximal number of tries. Setting Zero value will enable revertive protection switch only
if the last protection switch was due to a local equipment failure.rw INTEGER .1.3.6.1.4.1.2281.10.1.6.15 |
genEquipProtectionRevertiveTimerMultiplierA factor that increases the revertive timer period after each try. Setting 1 value will leave the timer period constantly at its minimal value.rw INTEGER .1.3.6.1.4.1.2281.10.1.6.16 |
genEquipProtectionAspRevertiven Smart Pipe HSB mode , this parameter causes the Ethernet line port to be muted upon a complete failure of
the radio signal (in both active and standby units)rw EnableDisable .1.3.6.1.4.1.2281.10.1.6.17 |
genEquipDiversity OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1.7 |
genEquipDiversityTypethis parameter sets the type of hitless diversity to be used.
Notice that only if protection is enabled this has any effect.rw Enumeration .1.3.6.1.4.1.2281.10.1.7.1 |
genEquipDiversityRevertiveModethis parameter sets whether hitless switches are revertive in the event that
the primary radio channel doesn't have any errors.rw Enumeration .1.3.6.1.4.1.2281.10.1.7.2 |
genEquipDiversityPrimaryRadiothis parameter sets which IDU contains the primary radio channel to revert to.rw Enumeration .1.3.6.1.4.1.2281.10.1.7.3 |
genEquipDiversityRevertiveTimerThis parameter sets the amount of seconds that must pass without a failure in
the primary radio before doing a revertive switch.rw INTEGER .1.3.6.1.4.1.2281.10.1.7.4 |
genEquipDiversityForceActiveThis parameter allows forcing incoming traffic to be taken from either of
the radios (or none) for testing purposes.rw Enumeration .1.3.6.1.4.1.2281.10.1.7.5 |
genEquipDiversitySwitchCounterThis parameter shows the number of hitless switches performed since last time counter was cleared.ro INTEGER .1.3.6.1.4.1.2281.10.1.7.6 |
genEquipDiversitySwitchCounterClearThis parameter allows clearing of switch counter.rw OffOn .1.3.6.1.4.1.2281.10.1.7.7 |
genEquipDiversityReceiveRadioThis parameter shows from which radio the traffic is currently being taken.ro Enumeration .1.3.6.1.4.1.2281.10.1.7.8 |
genEquipFault OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.3 |
genEquipCurrentAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.3.1 |
genEquipCurrentAlarmLastChangeCounterThis counter is initialized with a random number after resest,
and incremented on each change in the CurrentAlarmTablero INTEGER .1.3.6.1.4.1.2281.10.3.1.1 |
genEquipCurrentAlarmTableThis table includes the current alarm (when a RAISED trap is
sent, an alarm is added to the table, when a CLEAR trap is sent,
the alarm is removed). SEQUENCE OF GenEquipCurrentAlarmEntry .1.3.6.1.4.1.2281.10.3.1.2 |
genEquipCurrentAlarmEntryEntry containing the info of current RAISED traps. GenEquipCurrentAlarmEntry .1.3.6.1.4.1.2281.10.3.1.2.1 |
genEquipCurrentAlarmCounterA running counter of open alarms, incremented upon each new alarm.ro INTEGER .1.3.6.1.4.1.2281.10.3.1.2.1.1 |
genEquipCurrentAlarmRaisedTimeTThe rasied time of this alarm.
Time in seconds since January 1, 1970 00:00 UTC.ro INTEGER .1.3.6.1.4.1.2281.10.3.1.2.1.2 |
genEquipCurrentAlarmIdAlarm ID. List of alarm IDs is available in the MIB Ref. Guide.ro INTEGER .1.3.6.1.4.1.2281.10.3.1.2.1.3 |
genEquipCurrentAlarmNameAlarm name (the parameter and entity in the CLI) for example
'radio/framer/radio-lof'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.1.2.1.4 |
genEquipCurrentAlarmInstanceIn the case of alarms that may have several appereances (at interfaces, channels, VCs, etc.), this parameter indicates the instance of the alarm.ro INTEGER .1.3.6.1.4.1.2281.10.3.1.2.1.5 |
genEquipCurrentAlarmSeverityThe current Alarm severity
the values can be:
- indeterminate(0)
- critical(1)
- major(2)
- minor(3)
- warning(4)
- cleared(5)ro Severity .1.3.6.1.4.1.2281.10.3.1.2.1.6 |
genEquipCurrentAlarmIfIndexInterface Index where the alarm occurred, alarms that are
not associated with specific interfaces will have the following value:
For a non-interface alarm, the value is: 65001ro INTEGER .1.3.6.1.4.1.2281.10.3.1.2.1.7 |
genEquipCurrentAlarmModuleThe module of the alarm.
Possible values are 'IDU' or 'RFU'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.1.2.1.8 |
genEquipCurrentAlarmDescThe alarm description (same as the description in the sent trap).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.1.2.1.9 |
genEquipCurrentAlarmProbableCauseThe alarm probable cause.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.1.2.1.10 |
genEquipCurrentAlarmCorrectiveActionsThe alarm corrective actions.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.1.2.1.11 |
genEquipCurrentAlarmStateThe state of the alarm (cleared or rasied).ro Enumeration .1.3.6.1.4.1.2281.10.3.1.2.1.12 |
genEquipCurrentAlarmSlotIdThe ID of the slot originating the alarm.ro SlotId .1.3.6.1.4.1.2281.10.3.1.2.1.13 |
genEquipCurrentAlarmAdditionalInfoAdditional information that may further qualify the source of the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.1.2.1.14 |
genEquipCurrentAlarmUserTextAn additional description of the event or fault, or any other information that user wants to attach to it.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.1.2.1.15 |
genEquipMostSevereAlarmThe severity of the most severe alarm in the systemro Severity .1.3.6.1.4.1.2281.10.3.1.3 |
genEquipAlarmConfigDefaultAllows to revert back to the default values of all alarm configurationsrw OffOn .1.3.6.1.4.1.2281.10.3.1.4 |
genEquipAlarmConfigTableThis table allows system alarms configuration. SEQUENCE OF GenEquipAlarmConfigEntry .1.3.6.1.4.1.2281.10.3.1.5 |
genEquipAlarmConfigEntryThis table entry allows system alarms configuration. GenEquipAlarmConfigEntry .1.3.6.1.4.1.2281.10.3.1.5.1 |
genEquipAlarmConfigIdhe alarm unique Id number that identifies it.ro INTEGER .1.3.6.1.4.1.2281.10.3.1.5.1.1 |
genEquipAlarmConfigSeverityThe perceived severity of the raised alarm.rw Severity .1.3.6.1.4.1.2281.10.3.1.5.1.2 |
genEquipAlarmConfigDescrThe description of the raised alarm.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.1.5.1.3 |
genEquipAlarmConfigAdditionalTextAn additional description of the fault, or any other information that user wants to attach to it.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.1.5.1.4 |
genEquipAlarmServiceAffectIndicates whether the raised alarm affects a service.rw OffOn .1.3.6.1.4.1.2281.10.3.1.5.1.5 |
genEquipTrapCfg OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.3.2 |
genEquipTrapCfgMgrTableThis table indicates the Trap manager list. SEQUENCE OF GenEquipTrapCfgMgrEntry .1.3.6.1.4.1.2281.10.3.2.1 |
genEquipTrapCfgMgrEntryEntry containing the manager IP addresses and the trap filter options. GenEquipTrapCfgMgrEntry .1.3.6.1.4.1.2281.10.3.2.1.1 |
genEquipTrapCfgMgrIdThis value indicates an index of a specific managerro INTEGER .1.3.6.1.4.1.2281.10.3.2.1.1.1 |
genEquipTrapCfgMgrAdminThis value indicates an administrative state of a specific manager.
disable - will not send traps to this trap manager.rw EnableDisable .1.3.6.1.4.1.2281.10.3.2.1.1.2 |
genEquipTrapCfgMgrIPThis value indicates the manager's IP address.rw IpAddress .1.3.6.1.4.1.2281.10.3.2.1.1.3 |
genEquipTrapCfgMgrPortThe Port for sending the trap for each manager (possible values: 70-65535)rw INTEGER .1.3.6.1.4.1.2281.10.3.2.1.1.4 |
genEquipTrapCfgMgrNameThe name of the manager configured to receive the trapsrw DisplayString .1.3.6.1.4.1.2281.10.3.2.1.1.5 |
genEquipTrapCfgMgrCommunityThe manager trap community configured.rw DisplayString .1.3.6.1.4.1.2281.10.3.2.1.1.6 |
genEquipTrapCfgMgrSeverityFilterThis is a bit mask value for masking traps according to its severity.
There is a bit for each severity. If the relevant bit is on (1),
the Agent will send traps with this severity. It won't send traps if the
bit is off (0).
The list of bits from LSB to MSB:
Bit 1 (LSB) - indeterminate
Bit 2 - critical
Bit 3 - major
Bit 4 - minor
Bit 5 - warning
Bit 6 - clearedrw INTEGER .1.3.6.1.4.1.2281.10.3.2.1.1.7 |
genEquipTrapCfgMgrStatusChangeFilterThis value represents the mode in which the traps are sent:
If the filter is set to ON - only traps that change the severity of the system are sent.
If the filter is set to OFF - all traps (that are not screened by other filters) are sent.rw OffOn .1.3.6.1.4.1.2281.10.3.2.1.1.8 |
genEquipTrapCfgMgrCLLICommon Language Location Identifier (maximum length: 100 chars)rw DisplayString .1.3.6.1.4.1.2281.10.3.2.1.1.9 |
genEquipTrapCfgMgrHeartbeatPeriodThis item defines the interval (in minutes) between each heartbeat trap.
A value of '0' disables this feature.rw INTEGER .1.3.6.1.4.1.2281.10.3.2.1.1.10 |
genEquipTrapCfgMgrIPv6The IP-v6 address of the trap manage)rw OCTET STRING .1.3.6.1.4.1.2281.10.3.2.1.1.11 |
genEquipTrapCfgMgrV3UserThe manager trap V3 user name configuredrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.2.1.1.12 |
genEquipEventLog OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.3.3 |
genEquipEventLogTableThis table includes the event log. SEQUENCE OF GenEquipEventLogEntry .1.3.6.1.4.1.2281.10.3.3.1 |
genEquipEventLogEntryEntry containing the info of the event log table. GenEquipEventLogEntry .1.3.6.1.4.1.2281.10.3.3.1.1 |
genEquipEventLogCounterThe event counter.ro INTEGER .1.3.6.1.4.1.2281.10.3.3.1.1.1 |
genEquipEventLogRaisedTimeTThe rasied time of this event.
Time in seconds since January 1, 1970 00:00 UTC. (time_t format)ro INTEGER .1.3.6.1.4.1.2281.10.3.3.1.1.2 |
genEquipEventLogSeverityThe event severity, possible values are:
- indeterminate(0),
- critical(1)
- major(2)
- minor(3)
- warning(4)
- cleared(5)ro Severity .1.3.6.1.4.1.2281.10.3.3.1.1.3 |
genEquipEventLogModuleThe module of the event. ('IDU' or 'RFU')ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.3.1.1.4 |
genEquipEventLogDescThe event description (same as the description in the sent trap).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.3.1.1.5 |
genEquipEventLogStateThe state of the event or alarm.
In case of alarm, 'cleard' or 'raised'.
In case of event, 'event'.ro Enumeration .1.3.6.1.4.1.2281.10.3.3.1.1.6 |
genEquipEventLogProbableCauseThe probable cause that may be the reason for the event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.3.1.1.7 |
genEquipEventLogCorrectiveActionsSome possible suggested corrective actions in order to eliminate the raised alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.3.1.1.8 |
genEquipEventLogAdditionalInfoAdditional information that may further qualify the source of the event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.3.1.1.9 |
genEquipEventLogUserTextAn additional description of the event or fault, or any other information that user wants to attach to it.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.3.1.1.10 |
genEquipEventLogIfIndexIf Index of the originated source.ro INTEGER .1.3.6.1.4.1.2281.10.3.3.1.1.11 |
genEquipEventLogIdThe Id of the event.ro INTEGER .1.3.6.1.4.1.2281.10.3.3.1.1.12 |
genEquipEventLogClearThe clear event log command. If enabled, will clear the event log.rw OffOn .1.3.6.1.4.1.2281.10.3.3.2 |
genEquipEventLogLastChangeCounterThis counter is initialized with a random number after reset,
and incremented on each change in the EventLogTablero INTEGER .1.3.6.1.4.1.2281.10.3.3.3 |
genEquipFaultErrnoThe application last error number. List of Errnos are located in the MIB Ref Guide.ro INTEGER .1.3.6.1.4.1.2281.10.3.4 |
genEquipFaultErrDescrThe application last error description. List of Errnos are located in the MIB Ref Guide.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.3.5 |
genEquipMng OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.4 |
genEquipMngSw OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.4.1 |
genEquipMngSwServerUrlRemote SW Update Server URL where SW updates residerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.1 |
genEquipMngSwServerLoginRemote server loginrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.2 |
genEquipMngSwServerPasswordRemote server passwordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.3 |
genEquipMngSwProxyUrlProxy Server Url.
This parameter is obsolete and should not be in used.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.4 |
genEquipMngSwProxyLoginProxy server login
This parameter is obsolete and should not be in used.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.5 |
genEquipMngSwProxyPasswordProxy server password
This parameter is obsolete and should not be in used.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.6 |
genEquipMngSwDownloadStatusDownload software status.
Possible values are:
- ready(0)
- inProgress(1)
- success(2)
- failure(3)ro ProgressStatus .1.3.6.1.4.1.2281.10.4.1.7 |
genEquipMngSwInstallStatusInstall software status.
Possible values are:
- ready(0)
- inProgress(1)
- success(2)
- failure(3)ro ProgressStatus .1.3.6.1.4.1.2281.10.4.1.8 |
genEquipMngSwCommandThe command that is executed to manage SW versions.
Depending on the value given, a different operation will be carried out involving FTP and/or version installing.
Notice that software will be installed in all slots in a shelf and reset will be automatically carried out
at the end of the installation process.
Possible values are:
- noOperation(0)
- downloadUpgradeVersion(1) - load a newer version from FTP site
- upgrade(2) - upgrade to newer version which has already been loaded
- rollback(3) - install a previously working version without downloading
- downgrade(4) - downgrade to an older version which has alredy been loaded
- downloadDowngradeVersion(5) - load an older version from FTP site
- upgradeTimer(6) - Starts the timer defined in genEquipMngSwInstallationTimer
and upon expiration upgrades to a newer version which has already been loaded.
- rollbackTimer(7) - Starts the timer defined in genEquipMngSwInstallationTimer
and upon expiration install a previously working version without downloading
- downgradeTimer(7) - Starts the timer defined in genEquipMngSwInstallationTimer
and upon expiration downgrades to an older which has already been loaded
- abortTimedTnstallation(9) stops a counting timer; the installation process will not take place.
Notice that it does not stop an installation process once started.rw SwCommandTimer .1.3.6.1.4.1.2281.10.4.1.9 |
genEquipMngSwInstalledIduVersionThis value indicates the Package Version of the installed IDU SWro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.10 |
genEquipMngSwInstalledRfuVersionThis value indicates the Package version of the installed RFU SW.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.11 |
genEquipMngSwVersions OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.4.1.13 |
genEquipMngSwIDUVersionsTableThis table contains all IDU running versions. SEQUENCE OF GenEquipMngSwIDUVersionsEntry .1.3.6.1.4.1.2281.10.4.1.13.1 |
genEquipMngSwIDUVersionsEntryEntry containing the info of the IDU Versions table. GenEquipMngSwIDUVersionsEntry .1.3.6.1.4.1.2281.10.4.1.13.1.1 |
genEquipMngSwIDUVersionsCounterThis is the index of this table.ro INTEGER .1.3.6.1.4.1.2281.10.4.1.13.1.1.1 |
genEquipMngSwIDUVersionsPackageNameThe package namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.13.1.1.2 |
genEquipMngSwIDUVersionsTargetDeviceThe Target device within the NE (i.e. Modem, FPGA, IDU)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.13.1.1.3 |
genEquipMngSwIDUVersionsRunningVersionThe running version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.13.1.1.4 |
genEquipMngSwIDUVersionsInstalledVersionThe installed version is similar to the running version, besides packages that are not currently running.
Those packages will have in the running version 'N/A' while in the installed version there is a version number.
For example, in equipment without daughter-board, some of the packages will be installed but not running.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.13.1.1.5 |
genEquipMngSwIDUVersionsUpgradePackageIn case the user performs an upgrade, this version will be the running/installed versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.13.1.1.6 |
genEquipMngSwIDUVersionsDowngradePackageIn case the user performs downgrade, this version will be the running/installed version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.13.1.1.7 |
genEquipMngSwIDUVersionsResetTypeMinimum level of reset required to update the software in the relevant module.ro Enumeration .1.3.6.1.4.1.2281.10.4.1.13.1.1.8 |
genEquipMngSwTimerTableThis table contains all IDU running versions. SEQUENCE OF GenEquipMngSwTimerEntry .1.3.6.1.4.1.2281.10.4.1.13.2 |
genEquipMngSwTimerEntryEntry containing the info of the IDU Versions table. GenEquipMngSwTimerEntry .1.3.6.1.4.1.2281.10.4.1.13.2.1 |
genEquipMngSwTimerSlotNumberThe slot ID of the unit for this timer; 0 is for stand-alone units.ro INTEGER .1.3.6.1.4.1.2281.10.4.1.13.2.1.1 |
genEquipMngSwTimerInstallationTimerThe timer (in minutes) for software installation operations to this unit.rw INTEGER .1.3.6.1.4.1.2281.10.4.1.13.2.1.2 |
genEquipMngSwTimerTimeToInstallThe amount of time (in seconds) from now for the unit to perform software installation.
Zero denotes that no operation has been requested.ro INTEGER .1.3.6.1.4.1.2281.10.4.1.13.2.1.3 |
genEquipMngSwTimerTimerAbortThis parameter is used to stop the count-down to the software update action.rw Enumeration .1.3.6.1.4.1.2281.10.4.1.13.2.1.4 |
genEquipMngSwFTPTimerTime (in seconds) until file transfer is failed.rw INTEGER .1.3.6.1.4.1.2281.10.4.1.13.10 |
genEquipMngSwInstallationTimerThe timer (in minutes) for timed software installation operations to this unitrw INTEGER .1.3.6.1.4.1.2281.10.4.1.14 |
genEquipMngSwTimeToInstallThe amount of time (in minutes) from now for the unit to perform software installation.
Zero denotes that no operation has been requestedro INTEGER .1.3.6.1.4.1.2281.10.4.1.15 |
genEquipMngSwUpgradeCommonRfuVersionThis value indicates the Package version of the installed RFU SW.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.16 |
genEquipMngSwDowngradeCommonRfuVersionThis value indicates the Package version of the installed RFU SW.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.17 |
genEquipMngSwFileTransferTableThis table allows configuring the details of the external server where software versions should be located. SEQUENCE OF GenEquipMngSwFileTransferEntry .1.3.6.1.4.1.2281.10.4.1.18 |
genEquipMngSwFileTransferEntryEntry containing the info of software management file transfer. GenEquipMngSwFileTransferEntry .1.3.6.1.4.1.2281.10.4.1.18.1 |
genEquipMngSwFileTransferIndexThe index of the table.ro INTEGER .1.3.6.1.4.1.2281.10.4.1.18.1.1 |
genEquipMngSwFileTransferProtocolThe protocol to use to transfer the files between the system and an external computer.rw FtpProtocolType .1.3.6.1.4.1.2281.10.4.1.18.1.2 |
genEquipMngSwFileTransferUserNameUser name for access to the configuration files location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.18.1.3 |
genEquipMngSwFileTransferPasswordPassword for access to the software version files location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.18.1.4 |
genEquipMngSwFileTransferAddressIP address of the computer where software version files are to be taken from.rw IpAddress .1.3.6.1.4.1.2281.10.4.1.18.1.5 |
genEquipMngSwFileTransferPathLocation of the files in the external server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.18.1.6 |
genEquipMngSwFileTransferIpv6AddressIPv6 Server Address.rw OCTET STRING .1.3.6.1.4.1.2281.10.4.1.18.1.7 |
genEquipMngSwFileTransferStatusTableThis table shows the status of the current software version file transfer operation. SEQUENCE OF GenEquipMngSwFileTransferStatusEntry .1.3.6.1.4.1.2281.10.4.1.19 |
genEquipMngSwFileTransferStatusEntryEntry containing the info of software management file transfer status. GenEquipMngSwFileTransferStatusEntry .1.3.6.1.4.1.2281.10.4.1.19.1 |
genEquipMngSwFileTransferStatusIndexThe index of the table..ro INTEGER .1.3.6.1.4.1.2281.10.4.1.19.1.1 |
genEquipMngSwFileTransferStatusResultStatus of the current file transfer operation.ro Enumeration .1.3.6.1.4.1.2281.10.4.1.19.1.2 |
genEquipMngSwFileTransferPercentageDoneAn indication of the progress of the process of the current file transfer operation.ro INTEGER .1.3.6.1.4.1.2281.10.4.1.19.1.3 |
genEquipMngSwFileTransferPercentageDoneStandByAn indication of the progress of the process of the current internal file transfer operation.ro INTEGER .1.3.6.1.4.1.2281.10.4.1.19.1.4 |
genEquipMngSwFileTransferStatusResultStandByStatus of the current internal file transfer operation.ro Enumeration .1.3.6.1.4.1.2281.10.4.1.19.1.5 |
genEquipMngSwInstallStatusTableThis table shows the status of the current software version installation operation. SEQUENCE OF GenEquipMngSwInstallStatusEntry .1.3.6.1.4.1.2281.10.4.1.20 |
genEquipMngSwInstallStatusEntryEntry containing the info of software installation status. GenEquipMngSwInstallStatusEntry .1.3.6.1.4.1.2281.10.4.1.20.1 |
genEquipMngSwInstallStatusIndexThe index of the table..ro INTEGER .1.3.6.1.4.1.2281.10.4.1.20.1.1 |
genEquipMngSwInstallStatusResultStatus of the current installation operation.ro Enumeration .1.3.6.1.4.1.2281.10.4.1.20.1.2 |
genEquipMngSwInstallPercentageDoneAn indication of the progress of the process of the current installation operation.ro INTEGER .1.3.6.1.4.1.2281.10.4.1.20.1.3 |
genEquipMngSwInstallStatusResultStandByStatus of the current file transfer operation.ro Enumeration .1.3.6.1.4.1.2281.10.4.1.20.1.4 |
genEquipMngSwInstallPercentageDoneStandByAn indication of the progress of the process of the current installation operation.ro INTEGER .1.3.6.1.4.1.2281.10.4.1.20.1.5 |
genEquipMngSwOperationTableThis table allows downloading and installing SW versions. SEQUENCE OF GenEquipMngSwOperationEntry .1.3.6.1.4.1.2281.10.4.1.21 |
genEquipMngSwOperationEntryEntry containing the info of software management operation table. GenEquipMngSwOperationEntry .1.3.6.1.4.1.2281.10.4.1.21.1 |
genEquipMngSwOperationIndexThe index of the table..ro INTEGER .1.3.6.1.4.1.2281.10.4.1.21.1.1 |
genEquipMngSwOperationOperationThe operation to be performed: download, install, update backup, swap boot section, abort installation timer.rw Enumeration .1.3.6.1.4.1.2281.10.4.1.21.1.2 |
genEquipMngSwOperationTimedInstallationWhether to perform the installation after a configurable timer expires.rw NoYes .1.3.6.1.4.1.2281.10.4.1.21.1.3 |
genEquipMngSwSlotRunningVersionTableThis table shows the versions currently running in cards installed in the system. SEQUENCE OF GenEquipMngSwSlotRunningVersionEntry .1.3.6.1.4.1.2281.10.4.1.22 |
genEquipMngSwSlotRunningVersionEntryThis table entry shows the versions currently running in cards installed in the system. GenEquipMngSwSlotRunningVersionEntry .1.3.6.1.4.1.2281.10.4.1.22.1 |
genEquipMngSwSlotRunningVersionSlotIdThe index of the table..ro INTEGER .1.3.6.1.4.1.2281.10.4.1.22.1.1 |
genEquipMngSwSlotRunningVersionCardTypeType of card inserted in slot.ro InventoryCardType .1.3.6.1.4.1.2281.10.4.1.22.1.2 |
genEquipMngSwSlotRunningVersionComponentName of SW functional component.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.22.1.3 |
genEquipMngSwSlotRunningVersionActualVersionVersion of running SW.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.22.1.4 |
genEquipMngSwIDUVersionsStandByTableThis table shows the software versions residing in the standby unit. SEQUENCE OF GenEquipMngSwIDUVersionsStandByEntry .1.3.6.1.4.1.2281.10.4.1.23 |
genEquipMngSwIDUVersionsStandByEntryThis table entry shows the software versions residing in the standby unit. GenEquipMngSwIDUVersionsStandByEntry .1.3.6.1.4.1.2281.10.4.1.23.1 |
genEquipMngSwIDUVersionsStandByIndexmate rpm index.ro INTEGER .1.3.6.1.4.1.2281.10.4.1.23.1.1 |
genEquipMngSwIDUVersionsStandByPackageNameName of the module which the software package belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.23.1.2 |
genEquipMngSwIDUVersionsStandByRunningVersionVersion currently running.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.23.1.3 |
genEquipMngSwIDUVersionsStandByInstalledVersionCurrently installed version; upon the appropriate reset this will become the running version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.23.1.4 |
genEquipMngSwIDUVersionsStandByTargetDeviceThe HW board in which the SW module from the mate is running.ro InventoryCardType .1.3.6.1.4.1.2281.10.4.1.23.1.5 |
genEquipMngSwIDUVersionsStandByDownloadedPackageVersion that was downloaded from server upon installation, it will become the installed version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.1.23.1.6 |
genEquipMngSwIDUVersionsStandByResetTypeMinimum level of reset required to update the software in the relevant module.ro VmResetType .1.3.6.1.4.1.2281.10.4.1.23.1.7 |
genEquipMngSwWatchdogAdminEnables/Disables the watchdog timer for the application.rw EnableDisable .1.3.6.1.4.1.2281.10.4.1.35 |
genEquipMngCfg OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.4.2 |
genEquipMngCfgBackupStatusThis parameter shows the current state of the configuration backup files creation in the IDU.
Possible values are:
- ready(0)
- inProgress(1)
- success(2)
- failure(3)ro ProgressStatus .1.3.6.1.4.1.2281.10.4.2.1 |
genEquipMngCfgRestoreStatusThis parameter shows the current state of configuration restoring from downloaded backup files.
Possible values are:
- ready(0)
- inProgress(1)
- success(2)
- failure(3)ro ProgressStatus .1.3.6.1.4.1.2281.10.4.2.2 |
genEquipMngCfgUploadStatusThis parameter shows the current state of configuration backup files transfer from IDU to external FTP site.
Possible values are:
- ready(0)
- inProgress(1)
- success(2)
- failure(3)ro ProgressStatus .1.3.6.1.4.1.2281.10.4.2.3 |
genEquipMngCfgDownloadStatusThis parameter shows the current state of configuration backup files transfer from external FTP site to IDU.
Possible values are:
- ready(0)
- inProgress(1)
- success(2)
- failure(3)ro ProgressStatus .1.3.6.1.4.1.2281.10.4.2.4 |
genEquipMngCfgCommandThe command to be executed to backup/restore or upload/download configuration.
If there is more then 1 slot in the NE, it is done for all the shelf.rw Enumeration .1.3.6.1.4.1.2281.10.4.2.5 |
genEquipMngCfgEthernetSwitchStoreConfigurationThis parameter writes the current configuration in the database.
This command should be called after any change to the following sections:
- Bridge configuration
- WaySide configuration
- Protection configuration.rw OffOn .1.3.6.1.4.1.2281.10.4.2.6 |
genEquipMngCfgSetToDefaultKeepIpSet to Default configuration without changing the network parameters such as IP address, and subnet mask.rw OffOn .1.3.6.1.4.1.2281.10.4.2.7 |
genEquipMngCfgCliScriptFileNameThe CLI script file name to be downloaded to the NE.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.2.8 |
genEquipMngCfgGeneric OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.4.2.10 |
genEquipMngCfgBackupProgressAn indication of the progress of the backup operation process.ro INTEGER .1.3.6.1.4.1.2281.10.4.2.10.1 |
genEquipMngCfgTimeToInstallationA counter indicating the time left until installation begins.ro INTEGER .1.3.6.1.4.1.2281.10.4.2.10.2 |
genEquipMngCfgFileTransferTableThis table allows configuring the details of the external server where configuration should be located. SEQUENCE OF GenEquipMngCfgFileTransferEntry .1.3.6.1.4.1.2281.10.4.2.11 |
genEquipMngCfgFileTransferEntryThis table entry allows configuring the details of the external server where configuration should be located. GenEquipMngCfgFileTransferEntry .1.3.6.1.4.1.2281.10.4.2.11.1 |
genEquipMngCfgFileTransferIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.2281.10.4.2.11.1.1 |
genEquipMngCfgFileTransferProtocolThe protocol to use to transfer the files between the system and an external computer.rw FtpProtocolType .1.3.6.1.4.1.2281.10.4.2.11.1.2 |
genEquipMngCfgFileTransferUserNameUser name for access to the configuration files location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.2.11.1.3 |
genEquipMngCfgFileTransferPasswordPassword for access to the configuration files location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.2.11.1.4 |
genEquipMngCfgFileTransferAddressIP address of the computer where configuration files are to be transferred to/from.rw IpAddress .1.3.6.1.4.1.2281.10.4.2.11.1.5 |
genEquipMngCfgFileTransferPathLocation of the files in the external server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.2.11.1.6 |
genEquipMngCfgFileTransferFileNameName of the file in server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.2.11.1.7 |
genEquipMngCfgFileTransferIpv6AddressIPv6 Server's address where files will be transferred to/from.rw OCTET STRING .1.3.6.1.4.1.2281.10.4.2.11.1.8 |
genEquipMngCfgFileTransferStatusTableThis table shows the status of the current configuration file transfer operation. SEQUENCE OF GenEquipMngCfgFileTransferStatusEntry .1.3.6.1.4.1.2281.10.4.2.12 |
genEquipMngCfgFileTransferStatusEntryThis table entry shows the status of the current configuration file transfer operation. GenEquipMngCfgFileTransferStatusEntry .1.3.6.1.4.1.2281.10.4.2.12.1 |
genEquipMngCfgFileTransferStatusIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.2281.10.4.2.12.1.1 |
genEquipMngCfgFileTransferStatusPercentageDoneAn indication of the progress of the process of the current file transfer operation.ro INTEGER .1.3.6.1.4.1.2281.10.4.2.12.1.2 |
genEquipMngCfgFileTransferStatusResultStatus of the current file transfer operation.rw FileTransferStatus .1.3.6.1.4.1.2281.10.4.2.12.1.3 |
genEquipMngCfgOperationTableThis table allows creating, restoring, transferring and deleting configuration files. SEQUENCE OF GenEquipMngCfgOperationEntry .1.3.6.1.4.1.2281.10.4.2.13 |
genEquipMngCfgOperationEntryThis table entry allows creating, restoring, transferring and deleting configuration files. GenEquipMngCfgOperationEntry .1.3.6.1.4.1.2281.10.4.2.13.1 |
genEquipMngCfgOperationIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.2281.10.4.2.13.1.1 |
genEquipMngCfgOperationOperationThe operation to be performed: backup, restore, delete, import, export.rw CfgOper .1.3.6.1.4.1.2281.10.4.2.13.1.2 |
genEquipMngCfgOperationFileNumberA number from 1 to 3 to identify different restoration files.rw INTEGER .1.3.6.1.4.1.2281.10.4.2.13.1.3 |
genEquipMngCfgOperationTimedInstallationWhether to install immediately or following a countdown from a defined counter.rw NoYes .1.3.6.1.4.1.2281.10.4.2.13.1.4 |
genEquipMngCfgOperationTimerA timer which determines the time to installation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.2.13.1.5 |
genEquipMngCfgOperationSlotNumberSlot number.ro INTEGER .1.3.6.1.4.1.2281.10.4.2.13.1.6 |
genEquipMngCfgConfigurationFilesTableThis table shows the status of the current configuration management operation. SEQUENCE OF GenEquipMngCfgConfigurationFilesEntry .1.3.6.1.4.1.2281.10.4.2.14 |
genEquipMngCfgConfigurationFilesEntryThis table entry shows the status of the current configuration file transfer operation. GenEquipMngCfgConfigurationFilesEntry .1.3.6.1.4.1.2281.10.4.2.14.1 |
genEquipMngCfgConfigurationFilesIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.2281.10.4.2.14.1.1 |
genEquipMngCfgConfigurationFilesFileNumberA number from 1 to 3 to identify different restoration files.ro INTEGER .1.3.6.1.4.1.2281.10.4.2.14.1.2 |
genEquipMngCfgConfigurationFilesSystemTypeType of product from which the backup file was created.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.2.14.1.3 |
genEquipMngCfgConfigurationFilesSWVersionSoftware version of the system from which the backup file was created.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.2.14.1.4 |
genEquipMngCfgConfigurationFilesTimeDateTime and date of creation of the file.ro INTEGER .1.3.6.1.4.1.2281.10.4.2.14.1.5 |
genEquipMngCfgConfigurationFilesSystemIPIP address of the unit from which the backup file was created.ro IpAddress .1.3.6.1.4.1.2281.10.4.2.14.1.6 |
genEquipMngCfgConfigurationFilesCardsConfiguredTypes of cards for which configuration values exist in the file; when restoring other card types will get default values.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.2.14.1.7 |
genEquipMngCfgConfigurationFilesSystemIDSystem ID of the unit from which the backup file was created.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.2.14.1.8 |
genEquipMngCfgFileRestoreStatusStatus of the operation of configuration restore from restore point.ro FileRestoreStatus .1.3.6.1.4.1.2281.10.4.2.20 |
genEquipMngCfgFileTransferStatusStatus of the operation of configuration restore from restore point.ro Enumeration .1.3.6.1.4.1.2281.10.4.2.21 |
genEquipMngFileTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.4.3 |
genEquipMngFileTransferFileTypeOperOperation for the file type to be transferred between the IDU and the external server.
The options with prefix 'download' are files to be transferred from the server to the IDU.
The options with prefix 'upload' are files to be transferred from the IDU to the server.
To download IDU certificate, the OIDs genEquipSecurityCfgSecurityFileName, genEquipSecurityCfgSecurityFileFormat
and genEquipSecurityCfgSecurityFileType should be set prior the operation of download security file.
To upload CSR file, the OID genEquipSecurityCfgSecurityFileName should be set prior the operation of upload CSR file.
To download CLI string, the OID genEquipMngCfgCliScriptFileName should be set prior the operation of download cli-script.
To download warning banner file, the OID genEquipSecurityCfgWarningBannerFName should be set prior the operation of download warning-banner.rw Enumeration .1.3.6.1.4.1.2281.10.4.3.1 |
genEquipMngFileTransferDownloadConfigStatusThe operation status of download configuration, which is performed using genEquipMngFileTransferFileTypeOperro ProgressStatus .1.3.6.1.4.1.2281.10.4.3.2 |
genEquipMngFileTransferDownloadCertificateStatusThe operation status of download configuration, which is performed using genEquipMngFileTransferFileTypeOperro ProgressStatus .1.3.6.1.4.1.2281.10.4.3.3 |
genEquipMngFileTransferDownloadWarningBannerStatusThe operation status of download warning banner, which is performed using genEquipMngFileTransferFileTypeOperro ProgressStatus .1.3.6.1.4.1.2281.10.4.3.4 |
genEquipMngFileTransferDownloadCliScriptStatusTThe operation status of download cli script, which is performed using genEquipMngFileTransferFileTypeOperro ProgressStatus .1.3.6.1.4.1.2281.10.4.3.5 |
genEquipMngFileTransferUploadConfigStatusThe operation status of upload configuration, which is performed using genEquipMngFileTransferFileTypeOperro ProgressStatus .1.3.6.1.4.1.2281.10.4.3.6 |
genEquipMngFileTransferUploadCSRStatusThe operation status of upload CSR, which is performed using genEquipMngFileTransferFileTypeOperro ProgressStatus .1.3.6.1.4.1.2281.10.4.3.7 |
genEquipMngFileTransferUploadUnitInfoStatusThe operation status of upload unit info, which is performed using genEquipMngFileTransferFileTypeOperro ProgressStatus .1.3.6.1.4.1.2281.10.4.3.8 |
genEquipMngUnitInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.4.4 |
genEquipMngUnitInfoGeneric OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.4.4.1 |
genEquipMngUnitInfoOperationAllows creating and exporting the unit information file.rw CfgUnitInfoOper .1.3.6.1.4.1.2281.10.4.4.1.1 |
genEquipMngUnitInfoProgressProgress in percentage of the operation of the unit info file creation.ro INTEGER .1.3.6.1.4.1.2281.10.4.4.1.2 |
genEquipMngUnitInfoStatusStatus of the operation of the unit info file creation.ro ProgressStatus .1.3.6.1.4.1.2281.10.4.4.1.3 |
genEquipMngUnitInfoFileTransferTableThis table allows configuring the details of the external server which the unit info file will be expoted to. SEQUENCE OF GenEquipMngUnitInfoFileTransferEntry .1.3.6.1.4.1.2281.10.4.4.2 |
genEquipMngUnitInfoFileTransferEntryThis table entry allows configuring the details of the external server which the unit info file will be expoted to. GenEquipMngUnitInfoFileTransferEntry .1.3.6.1.4.1.2281.10.4.4.2.1 |
genEquipMngUnitInfoFileTransferIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.2281.10.4.4.2.1.1 |
genEquipMngUnitInfoFileTransferProtocolThe protocol to use to transfer the files between the system and an external computer.rw FtpProtocolType .1.3.6.1.4.1.2281.10.4.4.2.1.2 |
genEquipMngUnitInfoFileTransferUserNameUser name for access to the files location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.4.2.1.3 |
genEquipMngUnitInfoFileTransferPasswordPassword for access to the files location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.4.2.1.4 |
genEquipMngUnitInfoFileTransferAddressIP address of the computer where the files are to be transferred to/from.rw IpAddress .1.3.6.1.4.1.2281.10.4.4.2.1.5 |
genEquipMngUnitInfoFileTransferPathDesired location of the unit info file in external server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.4.2.1.6 |
genEquipMngUnitInfoFileTransferFileNameName of the file in server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.4.4.2.1.7 |
genEquipMngUnitInfoFileTransferIpv6AddressIPv6 Server's Address to which he file will be transferred.rw OCTET STRING .1.3.6.1.4.1.2281.10.4.4.2.1.8 |
genEquipMngUnitInfoFileTransferStatusTableThis table shows the status of the current configuration file transfer operation. SEQUENCE OF GenEquipMngUnitInfoFileTransferStatusEntry .1.3.6.1.4.1.2281.10.4.4.3 |
genEquipMngUnitInfoFileTransferStatusEntryThis table entry shows the status of the current configuration file transfer operation. GenEquipMngUnitInfoFileTransferStatusEntry .1.3.6.1.4.1.2281.10.4.4.3.1 |
genEquipMngUnitInfoFileTransferStatusIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.2281.10.4.4.3.1.1 |
genEquipMngUnitInfoFileTransferStatusPercentageDoneAn indication of the progress of the process of the current file transfer operation.ro INTEGER .1.3.6.1.4.1.2281.10.4.4.3.1.2 |
genEquipMngUnitInfoFileTransferStatusResultStatus of the current file transfer operation.rw ProgressStatus .1.3.6.1.4.1.2281.10.4.4.3.1.3 |
genEquipMngCli OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.4.5 |
genEquipMngCliScriptOperationAllows importing, showing, deleting and executing CLI scripts.rw Enumeration .1.3.6.1.4.1.2281.10.4.5.1 |
genEquipMngCliScriptOperationStatusAllows importing, showing, deleting and executing CLI scripts.ro Enumeration .1.3.6.1.4.1.2281.10.4.5.2 |
genEquipDiagAndMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.10 |
genEquipDiagAndMaintenanceRadioLoopbackTimeoutRadio loopback timeout, in minutes. 0 means no timer.rw INTEGER .1.3.6.1.4.1.2281.10.10.1 |
genEquipDiagAndMaintenanceLineLoopbackTimeoutLine loopback timeout, in minutes. 0 means no timer.rw INTEGER .1.3.6.1.4.1.2281.10.10.2 |
genEquipDiagAndMaintenanceSDHLoopbackTimeoutSTM-1/OC-3 line loopback timeout, in minutes. 0 means no timer.rw INTEGER .1.3.6.1.4.1.2281.10.10.3 |
genEquipSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11 |
genEquipSecurityConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.1 |
genEquipSecurityCfgUploadPublicKeyStatusThe upload status of the Public key.ro ProgressStatus .1.3.6.1.4.1.2281.10.11.1.1 |
genEquipSecurityCfgDownloadSecurityStatusThe download status of the digital certificate.ro ProgressStatus .1.3.6.1.4.1.2281.10.11.1.2 |
genEquipSecurityCfgSecurityFileNameThe certificate file name to be downloaded.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.1.3 |
genEquipSecurityCfgSecurityFileTypeThe digital certificate file type.rw Enumeration .1.3.6.1.4.1.2281.10.11.1.4 |
genEquipSecurityCfgSecurityFileFormatThe certificate file format.
.pem - (Privacy Enhanced Mail) Base64 encoded DER certificate,
enclosed between -BEGIN CERTIFICATE- and -END CERTIFICATE-
.der is a subset of Basic Encoding Rules (BER) providing for exactly one way to encode an ASN.1 value.rw Enumeration .1.3.6.1.4.1.2281.10.11.1.5 |
genEquipSecurityCfgSecurityWebCertificateAdminThe admin state of the certificate.rw EnableDisable .1.3.6.1.4.1.2281.10.11.1.6 |
genEquipSecurityCfgWebProtocolUse unsecure http or secure https.rw Enumeration .1.3.6.1.4.1.2281.10.11.1.7 |
genEquipSecurityCfgTelnetAdminEnable or disable the Telnet server on the NE.rw EnableDisable .1.3.6.1.4.1.2281.10.11.1.8 |
genEquipSecurityCfgAutoLogOutPeriodAuto logout period for CLI or web users, (1-60 seconds)rw INTEGER .1.3.6.1.4.1.2281.10.11.1.9 |
genEquipSecurityXFTP OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.1.10 |
genEquipSecurityXFTPHostIPThe FTP/SFTP host IP address.rw IpAddress .1.3.6.1.4.1.2281.10.11.1.10.1 |
genEquipSecurityXFTPHostPathThe FTP/SFTP host directory path.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.1.10.2 |
genEquipSecurityXFTPProtocolEither FTP or SFTP to be used.rw Enumeration .1.3.6.1.4.1.2281.10.11.1.10.3 |
genEquipSecurityXFTPUserNameFTP User name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.1.10.4 |
genEquipSecurityXFTPPasswordFTP User password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.1.10.5 |
genEquipSecurityCfgPassFirstLoginChangeDefine whether user's first login will be required to change it password or notrw NoYes .1.3.6.1.4.1.2281.10.11.1.11 |
genEquipSecurityCfgCSRCreationThis command create CSR file of the element.
The file could be uploaded to external server by using the genEquipMngFileTransferFileTypeOper OID.
The command syntax should be:
<country_name> <state> <locality_name> <organization_name> <organization_unit_name> <common_name> <email_addr>.
All the fields must be referred, for skipping on any field, use 'symbol instead'.rw DisplayString .1.3.6.1.4.1.2281.10.11.1.12 |
genEquipSecurityCfgWarningBannerFNameThe Warning Banner file name to be downloaded to the NE.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.1.13 |
genEquipSecurityConfigurationRadius OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.1.14 |
genEquipSecurityConfigurationRadiusAdminthis parameter configures the admin state of the RADIUS protocol; when enabled, all users will be logged in via RADIUS serverrw EnableDisable .1.3.6.1.4.1.2281.10.11.1.14.1 |
genEquipSecurityConfigurationRadiusServerIPthis parameter configures the IP address of the RADIUS serverrw IpAddress .1.3.6.1.4.1.2281.10.11.1.14.2 |
genEquipSecurityConfigurationRadiusSecretthis parameter configures the common secret between the agent and the RADIUS serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.1.14.3 |
genEquipSecurityConfigurationRadiusPortthis parameter configures the IP address of UDP port used for the RADIUS protocolrw INTEGER .1.3.6.1.4.1.2281.10.11.1.14.4 |
genEquipSecurityConfigurationRadiusRetriesthis parameter configures the number of times the agent will retry to communicate with the RADIUS server before declaring the server to be unreacheablerw INTEGER .1.3.6.1.4.1.2281.10.11.1.14.5 |
genEquipSecurityConfigurationRadiusTimeoutthis parameter configures the number of times the agent will retry to communicate with the RADIUS server before declaring the server to be unreacheablerw INTEGER .1.3.6.1.4.1.2281.10.11.1.14.6 |
genEquipSecurityUsersAndGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.2 |
genEquipSecurityUsersTableUser table. SEQUENCE OF GenEquipSecurityUsersEntry .1.3.6.1.4.1.2281.10.11.2.1 |
genEquipSecurityUsersEntryUser table. GenEquipSecurityUsersEntry .1.3.6.1.4.1.2281.10.11.2.1.1 |
genEquipSecurityUsersNameThis value is the user name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.2.1.1.1 |
genEquipSecurityUsersPasswdThis value is the user's password. It is used only in the creation phase. To change the password,
you need to use the genEquipSecurityUsersAndGroupsChangePasswd commandrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.2.1.1.2 |
genEquipSecurityUsersPriviledgeThis value is the users privilege.rw Enumeration .1.3.6.1.4.1.2281.10.11.2.1.1.3 |
genEquipSecurityUsersPasswdAgingThis value is the user's password aging time (in days). When response is 99999 the meaning is No Aging.rw INTEGER .1.3.6.1.4.1.2281.10.11.2.1.1.4 |
genEquipSecurityUsersExprDateThis value is the user's password expiration date.
The value is presented in time_t format. When response is -1 the meaning is Never Expired.rw INTEGER .1.3.6.1.4.1.2281.10.11.2.1.1.5 |
genEquipSecurityUsersLastLoginThis value is the user last login date. Time in seconds since January 1, 1970 00:00 UTC.ro INTEGER .1.3.6.1.4.1.2281.10.11.2.1.1.6 |
genEquipSecurityUsersRowStatusThis value is the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.2.1.1.30 |
genEquipSecurityUsersAndGroupsChangePasswdThis command changes the user password at the command line. It takes all arguments as the command.
It cannot be done through the table since it needs to provide the old password as well.
The format is: '<username> <old-password> <new-password>' seperated with spaces.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.2.2 |
genEquipSecuritySNMP OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.3 |
genEquipSecuritySNMPReadCommunityThis is the SNMP Read community stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.3.1 |
genEquipSecuritySNMPWriteCommunityThis is the SNMP Write community stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.3.2 |
genEquipSecuritySNMPV3 OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.3.10 |
genEquipSecuritySNMPV3AuthTableSecurity General File Transfer Configuration Table. SEQUENCE OF GenEquipSecuritySNMPV3AuthEntry .1.3.6.1.4.1.2281.10.11.3.10.1 |
genEquipSecuritySNMPV3AuthEntrySecurity General File Transfer Configuration Table GenEquipSecuritySNMPV3AuthEntry .1.3.6.1.4.1.2281.10.11.3.10.1.1 |
genEquipSecuritySNMPV3AuthUserNameThis value is the V3 user name and the index of file v3 Authentication table.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.3.10.1.1.1 |
genEquipSecuritySNMPV3AuthPasswordThis value is file V3 user authentication password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.3.10.1.1.2 |
genEquipSecuritySNMPV3AuthSecurityModeThis is the user's security moderw Enumeration .1.3.6.1.4.1.2281.10.11.3.10.1.1.3 |
genEquipSecuritySNMPV3AuthEncryptionModeThis is the V3 encryption mode.rw Enumeration .1.3.6.1.4.1.2281.10.11.3.10.1.1.4 |
genEquipSecuritySNMPV3AuthAuthenticationAlgorithmThis is the V3 authentication algorithm.rw Enumeration .1.3.6.1.4.1.2281.10.11.3.10.1.1.5 |
genEquipSecuritySNMPV3AuthAccessModeThis is the V3 user access mode.rw Enumeration .1.3.6.1.4.1.2281.10.11.3.10.1.1.6 |
genEquipSecuritySNMPV3AuthRowStatusThis is the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.3.10.1.1.30 |
genEquipSecurityGen OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.4 |
genEquipSecurityGenFTConfigTableSecurity General File Transfer Configuration Table. SEQUENCE OF GenEquipSecurityGenFTConfigEntry .1.3.6.1.4.1.2281.10.11.4.1 |
genEquipSecurityGenFTConfigEntrySecurity General File Transfer Configuration Table GenEquipSecurityGenFTConfigEntry .1.3.6.1.4.1.2281.10.11.4.1.1 |
genEquipSecurityGenFTConfigIndexThis value is the index of file transfer table.rw INTEGER .1.3.6.1.4.1.2281.10.11.4.1.1.1 |
genEquipSecurityGenFTConfigProtocolThis value is file transfer protocol.rw Enumeration .1.3.6.1.4.1.2281.10.11.4.1.1.2 |
genEquipSecurityGenFTConfigUsernameThis value is the user's namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.4.1.1.3 |
genEquipSecurityGenFTConfigPasswordThis value is the users password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.4.1.1.4 |
genEquipSecurityGenFTConfigAddressThis value is the server IP.rw IpAddress .1.3.6.1.4.1.2281.10.11.4.1.1.5 |
genEquipSecurityGenFTConfigFilePathThis value is file path.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.4.1.1.6 |
genEquipSecurityGenFTConfigFileNameThis value is the file name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.4.1.1.7 |
genEquipSecurityGenFTConfigIpV6AddressIP address v6 of the server, where the file are to be transferred to/from.rw OCTET STRING .1.3.6.1.4.1.2281.10.11.4.1.1.8 |
genEquipSecurityGenFTStatusTableSecurity General File Transfer Status Table. SEQUENCE OF GenEquipSecurityGenFTStatusEntry .1.3.6.1.4.1.2281.10.11.4.2 |
genEquipSecurityGenFTStatusEntrySecurity General File Transfer Status Table. GenEquipSecurityGenFTStatusEntry .1.3.6.1.4.1.2281.10.11.4.2.1 |
genEquipSecurityGenFTStatusIndexThis value is the index of file transfer status table.rw INTEGER .1.3.6.1.4.1.2281.10.11.4.2.1.1 |
genEquipSecurityGenFTStatusStatusFile transfer operation status.ro FTStatus .1.3.6.1.4.1.2281.10.11.4.2.1.2 |
genEquipSecurityGenFTStatusProgressProcess prcentagero INTEGER .1.3.6.1.4.1.2281.10.11.4.2.1.3 |
genEquipSecurityGenFTOperationsFile transfer operationsrw Enumeration .1.3.6.1.4.1.2281.10.11.4.11 |
genEquipSecurityGenImportExportAdminAdmin for import or export security settingsrw EnableDisable .1.3.6.1.4.1.2281.10.11.4.12 |
genEquipSecurityAccessControl OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.5 |
genEquipSecurityAccessControlProfileTableSecurity Access Control Profile Table. SEQUENCE OF GenEquipSecurityAccessControlProfileEntry .1.3.6.1.4.1.2281.10.11.5.1 |
genEquipSecurityAccessControlProfileEntrySecurity Access Control Profile Table Entry GenEquipSecurityAccessControlProfileEntry .1.3.6.1.4.1.2281.10.11.5.1.1 |
genEquipSecurityAccessControlProfileNameUser profile name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.5.1.1.1 |
genEquipSecurityAccessControlProfileChannelPermitted access channels.rw INTEGER .1.3.6.1.4.1.2281.10.11.5.1.1.2 |
genEquipSecurityAccessControlProfileUsedIndicate whether the profile in usedro INTEGER .1.3.6.1.4.1.2281.10.11.5.1.1.3 |
genEquipSecurityAccessControlProfileSecurityWriteSecurity functional write access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.4 |
genEquipSecurityAccessControlProfileSecurityReadSecurity functional read access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.5 |
genEquipSecurityAccessControlProfileMngWriteManagement functional write access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.6 |
genEquipSecurityAccessControlProfileMngReadManagement functional read access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.7 |
genEquipSecurityAccessControlProfileRadioWriteRadio functional write access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.8 |
genEquipSecurityAccessControlProfileRadioReadRadio functional read access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.9 |
genEquipSecurityAccessControlProfileTDMWriteTDM functional write access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.10 |
genEquipSecurityAccessControlProfileTDMReadTDM functional read access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.11 |
genEquipSecurityAccessControlProfileEthWriteEther functional write access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.12 |
genEquipSecurityAccessControlProfileEthReadEther functional read access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.13 |
genEquipSecurityAccessControlProfileSyncWriteSync functional write access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.14 |
genEquipSecurityAccessControlProfileSyncReadSync functional read access level.rw RbacAccessLevel .1.3.6.1.4.1.2281.10.11.5.1.1.15 |
genEquipSecurityAccessControlProfileRowStatusRow Status for Profile table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.5.1.1.30 |
genEquipSecurityAccessControlUserTableSecurity Access Control User Table. SEQUENCE OF GenEquipSecurityAccessControlUserEntry .1.3.6.1.4.1.2281.10.11.5.2 |
genEquipSecurityAccessControlUserEntrySecurity Access Control User Table Entry GenEquipSecurityAccessControlUserEntry .1.3.6.1.4.1.2281.10.11.5.2.1 |
genEquipSecurityAccessControlUserNameUser name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.5.2.1.1 |
genEquipSecurityAccessControlUserProfileUser's profile name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.5.2.1.2 |
genEquipSecurityAccessControlUserPasswordUser's passwordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.5.2.1.3 |
genEquipSecurityAccessControlUserExpiredexpired date of user account.rw INTEGER .1.3.6.1.4.1.2281.10.11.5.2.1.4 |
genEquipSecurityAccessControlUserBlockBlock user account.rw NoYes .1.3.6.1.4.1.2281.10.11.5.2.1.5 |
genEquipSecurityAccessControlUserLastLogoutCurrent login indication.rw INTEGER .1.3.6.1.4.1.2281.10.11.5.2.1.6 |
genEquipSecurityAccessControlUserLoggedInCurrent login indication.rw NoYes .1.3.6.1.4.1.2281.10.11.5.2.1.7 |
genEquipSecurityAccessControlUserRowStatusRow Status for users table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.5.2.1.30 |
genEquipSecurityAccessControlPassEnforceStrengthEnforce strength password.rw NoYes .1.3.6.1.4.1.2281.10.11.5.11 |
genEquipSecurityAccessControlPassFirstLoginChangePassword change for first login.rw NoYes .1.3.6.1.4.1.2281.10.11.5.12 |
genEquipSecurityAccessControlPassAgingPassword aging.rw NoYes .1.3.6.1.4.1.2281.10.11.5.13 |
genEquipSecurityAccessControlFailureLoginAttemptFailure login threshold blocking user account.rw INTEGER .1.3.6.1.4.1.2281.10.11.5.14 |
genEquipSecurityAccessControlBlockFailureLoginPeriodBlocking period due to failure login.rw INTEGER .1.3.6.1.4.1.2281.10.11.5.15 |
genEquipSecurityAccessControlBlockunusedAccountPeriod time for block unused account.rw INTEGER .1.3.6.1.4.1.2281.10.11.5.16 |
genEquipSecurityAccessControlBlockRootRemoteRoot remote access.rw NoYes .1.3.6.1.4.1.2281.10.11.5.17 |
genEquipSecurityProtocolsControl OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.6 |
genEquipSecurityProtocolsControlAutoSessionTimeOutLogout session after incativity timeout.rw INTEGER .1.3.6.1.4.1.2281.10.11.6.1 |
genEquipSecurityProtocolsControlSNMPAdminSNMP Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.11.6.2 |
genEquipSecurityProtocolsControlSNMPOperStatusSNMP Operational Status.ro DownUp .1.3.6.1.4.1.2281.10.11.6.3 |
genEquipSecurityProtocolsControlSNMPTrapVersionSNMP Trap version.rw Enumeration .1.3.6.1.4.1.2281.10.11.6.4 |
genEquipSecurityProtocolsControlSNMPMIBVersionSNMP MIB version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.6.5 |
genEquipSecurityProtocolsControlSNMPV1V2BlockedSNMP V1V2 is blocked.rw NoYes .1.3.6.1.4.1.2281.10.11.6.6 |
genEquipSecurityProtocolsControlHTTPAdminHTTP Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.11.6.7 |
genEquipSecurityMonitorAndLogs OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.7 |
genEquipSecurityConfigLogUploadConfigTableConfig Log Upload Configuration. SEQUENCE OF GenEquipSecurityConfigLogUploadConfigEntry .1.3.6.1.4.1.2281.10.11.7.1 |
genEquipSecurityConfigLogUploadConfigEntryConfig Log Upload Configuration Table Entry GenEquipSecurityConfigLogUploadConfigEntry .1.3.6.1.4.1.2281.10.11.7.1.1 |
genEquipSecurityConfigLogUploadConfigIndexConfig Log Upload Configuration index. has Fixed value of 1ro INTEGER .1.3.6.1.4.1.2281.10.11.7.1.1.1 |
genEquipSecurityConfigLogUploadConfigProtocolConfig Log Upload Configuration Protocol.rw FtpProtocolType .1.3.6.1.4.1.2281.10.11.7.1.1.2 |
genEquipSecurityConfigLogUploadConfigUsernameConfig Log Upload Usernamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.7.1.1.3 |
genEquipSecurityConfigLogUploadConfigPasswordConfig Log Upload Configuration Password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.7.1.1.4 |
genEquipSecurityConfigLogUploadConfigIpaddressConfig Log Upload Configuration ip address (Ipv4).rw IpAddress .1.3.6.1.4.1.2281.10.11.7.1.1.5 |
genEquipSecurityConfigLogUploadConfigPathConfig Log Upload Configuration Path.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.7.1.1.6 |
genEquipSecurityConfigLogUploadConfigFilenameConfig Log Upload Configuration Filename.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.7.1.1.7 |
genEquipSecurityConfigLogUploadConfigIpV6AddressConfig Log Upload Configuration ip address (Ipv6).rw OCTET STRING .1.3.6.1.4.1.2281.10.11.7.1.1.8 |
genEquipSecurityConfigLogUploadStatusTableConfig Log Upload Status. SEQUENCE OF GenEquipSecurityConfigLogUploadStatusEntry .1.3.6.1.4.1.2281.10.11.7.2 |
genEquipSecurityConfigLogUploadStatusEntryConfig Log Upload Status Table Entry GenEquipSecurityConfigLogUploadStatusEntry .1.3.6.1.4.1.2281.10.11.7.2.1 |
genEquipSecurityConfigLogUploadStatusIndexConfig Log Upload Status index. has Fixed value of 1ro INTEGER .1.3.6.1.4.1.2281.10.11.7.2.1.1 |
genEquipSecurityConfigLogUploadStatusStatusConfig Log Upload Configuration Protocol.rw FileTransferStatus .1.3.6.1.4.1.2281.10.11.7.2.1.2 |
genEquipSecurityConfigLogUploadStatusPrcntgProgress status in percentage.ro INTEGER .1.3.6.1.4.1.2281.10.11.7.2.1.3 |
genEquipSecurityConfigLogUploadConfiguration Log Upload.rw Enumeration .1.3.6.1.4.1.2281.10.11.7.10 |
genEquipSecurityRadiusServer OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.8 |
genEquipSecurityRadiusServerConfigurationTableRadius configuration table. SEQUENCE OF GenEquipSecurityRadiusServerConfigurationEntry .1.3.6.1.4.1.2281.10.11.8.1 |
genEquipSecurityRadiusServerConfigurationEntryRadius configuration table Entry GenEquipSecurityRadiusServerConfigurationEntry .1.3.6.1.4.1.2281.10.11.8.1.1 |
genEquipSecurityAccessControlRadiusServerIdServer id: 1 - primary, 2-secondaryro INTEGER .1.3.6.1.4.1.2281.10.11.8.1.1.1 |
genEquipSecurityAccessControlRadiusServerIpV4AddressThe IP address of the RADIUS Server.rw IpAddress .1.3.6.1.4.1.2281.10.11.8.1.1.2 |
genEquipSecurityAccessControlRadiusServerIpv6AddressThe IP address of the RADIUS Serverrw OCTET STRING .1.3.6.1.4.1.2281.10.11.8.1.1.3 |
genEquipSecurityAccessControlRadiusServerPortThe port ID of the RADIUS protocol in the RADIUS Server.rw INTEGER .1.3.6.1.4.1.2281.10.11.8.1.1.4 |
genEquipSecurityAccessControlRadiusServerRetriesThe number of times the agent will retry to communicate with the selected RADIUS server before declaring
the server to be not reachable.rw INTEGER .1.3.6.1.4.1.2281.10.11.8.1.1.5 |
genEquipSecurityAccessControlRadiusServerTimeoutThe timeout that the agent will wait in each communication with the selected RADIUS server
before retrying if no response is received.rw INTEGER .1.3.6.1.4.1.2281.10.11.8.1.1.6 |
genEquipSecurityAccessControlRadiusServerSharedSecretThe shared secret of the Radius Server.rw OCTET STRING .1.3.6.1.4.1.2281.10.11.8.1.1.7 |
genEquipSecurityAccessControlRadiusServerConnectivityStatusThe connectivity status of the RADIUS server in the last login tried.ro EnableDisable .1.3.6.1.4.1.2281.10.11.8.1.1.8 |
genEquipSecurityAccessControlRadiusUsersTableRadius privilege table. SEQUENCE OF GenEquipSecurityAccessControlRadiusUsersEntry .1.3.6.1.4.1.2281.10.11.8.2 |
genEquipSecurityAccessControlRadiusUsersEntryRadius privilege table Entry GenEquipSecurityAccessControlRadiusUsersEntry .1.3.6.1.4.1.2281.10.11.8.2.1 |
genEquipSecurityAccessControlRadiusUsersIdUser IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.8.2.1.1 |
genEquipSecurityAccessControlRadiusUserInstancesA number of the same connected users.ro INTEGER .1.3.6.1.4.1.2281.10.11.8.2.1.2 |
genEquipSecurityAccessControlRadiusUsersAccessChannelsA bits stands for each access channel: serial-0, telnet-1, ssh-2, web-3ro INTEGER .1.3.6.1.4.1.2281.10.11.8.2.1.3 |
genEquipSecurityAccessControlRadiusUsersEthReadLevelThe RADIUS permitted access for Ethernet Read Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.4 |
genEquipSecurityAccessControlRadiusUsersEthWriteLevelThe RADIUS permitted access for Ethernet Write Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.5 |
genEquipSecurityAccessControlRadiusUsersMngReadLevelThe RADIUS permitted access for MNG Read Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.6 |
genEquipSecurityAccessControlRadiusUsersMngWriteLevelThe RADIUS permitted access for MNG Write Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.7 |
genEquipSecurityAccessControlRadiusUsersRadioReadLevelThe RADIUS permitted access for Radio Read Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.8 |
genEquipSecurityAccessControlRadiusUsersRadioWriteLevelThe RADIUS permitted access for Radio Write Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.9 |
genEquipSecurityAccessControlRadiusUsersSecurityReadLevelThe RADIUS permitted access for Security Read Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.10 |
genEquipSecurityAccessControlRadiusUsersSecurityWriteLevelThe RADIUS permitted access for Security Write Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.11 |
genEquipSecurityAccessControlRadiusUsersSyncReadLevelThe RADIUS permitted access for Sync Read Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.12 |
genEquipSecurityAccessControlRadiusUsersSyncWriteLevelThe RADIUS permitted access for Sync Write Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.13 |
genEquipSecurityAccessControlRadiusUsersTdmReadLevelThe RADIUS permitted access for TDM Read Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.14 |
genEquipSecurityAccessControlRadiusUsersTdmWriteLevelThe RADIUS permitted access for TDM Write Level functional group.ro RaduisAcceaaLevel .1.3.6.1.4.1.2281.10.11.8.2.1.15 |
genEquipSecurityRadiusAdminControl working withRadius Server.rw EnableDisable .1.3.6.1.4.1.2281.10.11.8.10 |
genEquipSecurityCertificate OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.9 |
genEquipSecurityCsrCertificateFileTransferSetCSR generate and Upload.rw CsrCertificateFTState .1.3.6.1.4.1.2281.10.11.9.1 |
genEquipSecurityCsrStatusStatus of last geneate and upload.ro FTStatus .1.3.6.1.4.1.2281.10.11.9.2 |
genEquipSecurityCsrCertificateGenerateAndUploadPercentagePercentage of last generate CSR and upload.ro INTEGER .1.3.6.1.4.1.2281.10.11.9.3 |
genEquipSecurityCertificateInstallSetCertificate Install.rw OffOn .1.3.6.1.4.1.2281.10.11.9.4 |
genEquipSecurityCertificateDownloadStatustatus of last certificate download.ro FTStatus .1.3.6.1.4.1.2281.10.11.9.5 |
genEquipSecurityCertificateDownloadPercentagePercentage of certificate download operation.ro INTEGER .1.3.6.1.4.1.2281.10.11.9.6 |
genEquipSecurityCsrAttributesTableCSR Attributes Table. SEQUENCE OF GenEquipSecurityCsrAttributesEntry .1.3.6.1.4.1.2281.10.11.9.10 |
genEquipSecurityCsrAttributesEntryCSR Attributes Table Entry GenEquipSecurityCsrAttributesEntry .1.3.6.1.4.1.2281.10.11.9.10.1 |
genEquipSecurityCsrAttributesIndexIndex to table, constant 1ro INTEGER .1.3.6.1.4.1.2281.10.11.9.10.1.1 |
genEquipSecurityCsrAttributesCountryThe two-letter ISO abbreviation for your country (ISO3166-1) (example US).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.10.1.2 |
genEquipSecurityCsrAttributesLocalityThe city where your organization is legally locatedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.10.1.3 |
genEquipSecurityCsrAttributesStateThe state or province where your organization is legally located.
Can not be abbreviated.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.10.1.4 |
genEquipSecurityCsrAttributesOrganizationThe exact legal name of your organization.
Do not abbreviate your organization name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.10.1.5 |
genEquipSecurityCsrAttributesOuSection of the organization. Example: Marketing.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.10.1.6 |
genEquipSecurityCsrAttributesCommonNameThe fully qualified domain name for your web server.
This must be an exact match.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.10.1.7 |
genEquipSecurityCsrAttributesEmailAn email address used to contact your organization.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.10.1.8 |
genEquipSecurityCsrAttributesFileFormatCSR file format. PEM or DER.ro CsrFileFormat .1.3.6.1.4.1.2281.10.11.9.10.1.9 |
genEquipSecurityCsrUploadConfigTableCSR (Certificate Request) Upload Configuration Table. SEQUENCE OF GenEquipSecurityCsrUploadConfigEntry .1.3.6.1.4.1.2281.10.11.9.11 |
genEquipSecurityCsrUploadConfigEntryCSR (Certificate Request) Upload Configuration Table Entry GenEquipSecurityCsrUploadConfigEntry .1.3.6.1.4.1.2281.10.11.9.11.1 |
genEquipSecurityCsrUploadConfigIndexCSR upload Configuration index. has Fixed value of 1ro INTEGER .1.3.6.1.4.1.2281.10.11.9.11.1.1 |
genEquipSecurityCsrUploadConfigIpv4AddressIPv4 address of the server, where the file are to be transferred to/from.rw IpAddress .1.3.6.1.4.1.2281.10.11.9.11.1.2 |
genEquipSecurityCsrUploadConfigIpV6AddressIPv6 address of the server, where the file are to be transferred to/fromrw OCTET STRING .1.3.6.1.4.1.2281.10.11.9.11.1.3 |
genEquipSecurityCsrUploadConfigTableUsernameUser name for accesssing files in the server (User credentials to access server).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.11.1.4 |
genEquipSecurityCsrUploadConfigPasswordPassword (User credentials to access server).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.11.1.5 |
genEquipSecurityCsrUploadConfigPathLocation of file in the server (folder).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.11.1.6 |
genEquipSecurityCsrUploadConfigFilenameFilename in the server, where the file are to be transferred to/from.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.11.1.7 |
genEquipSecurityCertificateDownloadConfigTableCSR (Certificate Request) Download Configuration Table. SEQUENCE OF GenEquipSecurityCertificateDownloadConfigEntry .1.3.6.1.4.1.2281.10.11.9.12 |
genEquipSecurityCertificateDownloadConfigEntryCSR (Certificate Request) Download Configuration Table Entry GenEquipSecurityCertificateDownloadConfigEntry .1.3.6.1.4.1.2281.10.11.9.12.1 |
genEquipSecurityCertificateDownloadConfigIndexCertificate download configuration index. has Fixed value of 1ro INTEGER .1.3.6.1.4.1.2281.10.11.9.12.1.1 |
genEquipSecurityCertificateDownloadConfigIpv4AddressIPv4 address of the server, where the file are to be transferred to/from.rw IpAddress .1.3.6.1.4.1.2281.10.11.9.12.1.2 |
genEquipSecurityCertificateDownloadConfigIpV6AddressIPv6 address of the server, where the file are to be transferred to/fromrw OCTET STRING .1.3.6.1.4.1.2281.10.11.9.12.1.3 |
genEquipSecurityCertificateDownloadConfigUsernameUser name for accesssing files in the server (User credentials to access server).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.12.1.4 |
genEquipSecurityCertificateDownloadConfigPasswordPassword (User credentials to access server).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.12.1.5 |
genEquipSecurityCertificateDownloadConfigPathLocation of file in the server (folder).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.12.1.6 |
genEquipSecurityCertificateDownloadConfigFilenameFilename in the server, where the file are to be transferred to/from.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.11.9.12.1.7 |
genEquipSecurityTrafficCrypto OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.11.10 |
genEquipSecurityFipsAdminFIPS admin configuration parameterrw EnableDisable .1.3.6.1.4.1.2281.10.11.10.1 |
genEquipSecurityFipsStatusFIPS operational status.ro DownUp .1.3.6.1.4.1.2281.10.11.10.2 |
genEquipTrafficCryptoConfigTableTraffic Crypto configuration table. SEQUENCE OF GenEquipTrafficCryptoConfigEntry .1.3.6.1.4.1.2281.10.11.10.10 |
genEquipTrafficCryptoConfigEntryTraffic Crypto configuration table entry GenEquipTrafficCryptoConfigEntry .1.3.6.1.4.1.2281.10.11.10.10.1 |
genEquipTrafficCryptoConfigIdTraffic crypto Configuration Intreface IDro INTEGER .1.3.6.1.4.1.2281.10.11.10.10.1.1 |
genEquipTrafficCryptoConfigConfigAdminTraffic Crypto Admin Mode.rw Enumeration .1.3.6.1.4.1.2281.10.11.10.10.1.2 |
genEquipTrafficCryptoConfigMkeyTraffic Crypto Master Key.rw OCTET STRING .1.3.6.1.4.1.2281.10.11.10.10.1.3 |
genEquipTrafficCryptoConfigBackupMkeyTraffic Crypto Backup Master Keyrw OCTET STRING .1.3.6.1.4.1.2281.10.11.10.10.1.4 |
genEquipTrafficCryptoConfigMkeyPeriodMaster Key Expire Configuration.rw INTEGER .1.3.6.1.4.1.2281.10.11.10.10.1.5 |
genEquipTrafficCryptoConfigRandKeyGenRandom Key generation/clear indication.rw Enumeration .1.3.6.1.4.1.2281.10.11.10.10.1.6 |
genEquipTrafficCryptoConfigSkeyPeriodSession Key Update Time Configuration.rw INTEGER .1.3.6.1.4.1.2281.10.11.10.10.1.7 |
genEquipTrafficCryptoStatusTableTraffic Crypto status table. SEQUENCE OF GenEquipTrafficCryptoStatusEntry .1.3.6.1.4.1.2281.10.11.10.11 |
genEquipTrafficCryptoStatusEntryTraffic Crypto status table Entry GenEquipTrafficCryptoStatusEntry .1.3.6.1.4.1.2281.10.11.10.11.1 |
genEquipTrafficCryptoStatusIdTraffic Crypto Status Intreface IDro INTEGER .1.3.6.1.4.1.2281.10.11.10.11.1.1 |
genEquipTrafficCryptoStatusValidCrypto Interface Validation State.ro Enumeration .1.3.6.1.4.1.2281.10.11.10.11.1.2 |
genEquipTrafficCryptoStatusMkeyTimeExpireNumber of days Mkey to expire.ro INTEGER .1.3.6.1.4.1.2281.10.11.10.11.1.3 |