MWRM-NETWORK-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
1436
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
1436 total| Object Name |
|---|
microwave-radio OBJECT IDENTIFIER .1.3.6.1.4.1.2281 |
SNMPv2-TC Unknown .1.3.6.1.4.1.2281 |
eventTrapEvent network trap TRAP-TYPE .1.3.6.1.4.1.2281.0.1002 |
eventTrapSTPSTP trap.
(1) The description field shows show the descriptions of the event
STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
Role: <Role>, State: <state>
In addition to the general trap event var-binds, this trap also adds the STP parameters. TRAP-TYPE .1.3.6.1.4.1.2281.0.1004 |
alarmTrapNG Alarm network trap TRAP-TYPE .1.3.6.1.4.1.2281.0.2000 |
heartbeatTrapNG heartbeat trap, sent once per heartbeat period TRAP-TYPE .1.3.6.1.4.1.2281.0.2001 |
genEquip OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10 |
genEquipUnit OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1 |
genEquipNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.2 |
genEquipNetworkRemoteIpThis value indicates the Remote IP address.roobsolete IpAddress .1.3.6.1.4.1.2281.10.2.1 |
genEquipNetworkMateIpThis value indicates the Mate IP address. (same as genEquipProtectionMateIPAddr)ro IpAddress .1.3.6.1.4.1.2281.10.2.2 |
genEquipNetworkAgentIpThis value indicates the Agent IP address. (same as genEquipNetworkManagmentLocalIp)roobsolete IpAddress .1.3.6.1.4.1.2281.10.2.3 |
genEquipNetworkManagment OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.2.4 |
genEquipNetworkManagmentLocalIpThis value indicates the local IP address. (same as genEquipNetworkAgentIp)rw IpAddress .1.3.6.1.4.1.2281.10.2.4.1 |
genEquipNetworkManagmentLocalSubnetMaskThis value indicates the local subnet mask. (for example 255.255.255.0)rw IpAddress .1.3.6.1.4.1.2281.10.2.4.2 |
genEquipNetworkManagmentLocalDefaultGatewayThis value indicates the local default gateway.rw IpAddress .1.3.6.1.4.1.2281.10.2.4.3 |
genEquipNetworkManagmentLocalHWAddrThis value indicates the MAC Address used for management (related to the management IP address of the system).ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2281.10.2.4.4 |
genEquipNetworkManagmentRemoteSubnetMaskThis value indicates the Remote subnet mask.(for example 255.255.255.0)rwobsolete IpAddress .1.3.6.1.4.1.2281.10.2.4.5 |
genEquipNetworkManagmentNumOfPortsThis value indicates the number of management ports.rw INTEGER .1.3.6.1.4.1.2281.10.2.4.6 |
genEquipNetworkManagmentInBandVLANThis value indicates the number of in-band VLANs.rw INTEGER .1.3.6.1.4.1.2281.10.2.4.7 |
genEquipNetworkManagmentPortTypeThis is a configurable option to use in-band or out-of-band management.rw Enumeration .1.3.6.1.4.1.2281.10.2.4.8 |
genEquipNetworkManagmentPortCapacityThis value indicates a limit rate for the management port capacity in kbps.rw Enumeration .1.3.6.1.4.1.2281.10.2.4.9 |
genEquipNetworkManagmentPortAutoNegotiationEnable or disable the Auto Negotiation option, on all management ports.rw OffOn .1.3.6.1.4.1.2281.10.2.4.10 |
genEquipNetworkManagmentPortRateThis value indicates the port rate in Mbps (all management ports).
Possible values are:
- n10(0) 10Mbps
- n100(1) 100Mbps
- n1000(2) 1000Mbpsrw Enumeration .1.3.6.1.4.1.2281.10.2.4.11 |
genEquipNetworkManagmentPortDuplexThis value indicates the port duplex value, for all management ports.rw Enumeration .1.3.6.1.4.1.2281.10.2.4.12 |
genEquipNetworkManagmentBlockMngTowardsLineBlocking the in-band management frames to egress via the Ethernet line interface in pipe application.rw EnableDisable .1.3.6.1.4.1.2281.10.2.4.13 |
genEquipNetworkManagmentIpAddrCfgTableThis table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery. SEQUENCE OF GenEquipNetworkManagmentIpAddrCfgEntry .1.3.6.1.4.1.2281.10.2.4.20 |
genEquipNetworkManagmentIpAddrCfgEntryThis table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery. GenEquipNetworkManagmentIpAddrCfgEntry .1.3.6.1.4.1.2281.10.2.4.20.1 |
genEquipNetworkManagmentIpAddrCfgMngIdManagement Ifindex.rw INTEGER .1.3.6.1.4.1.2281.10.2.4.20.1.1 |
genEquipNetworkManagmentIpAddrCfgIpv4AddressThis value indicates the local IP addressrw IpAddress .1.3.6.1.4.1.2281.10.2.4.20.1.2 |
genEquipNetworkManagmentIpAddrCfgIpv4SubnetMaskThis value indicates the local subnet mask. (for example 255.255.255.0)rw IpAddress .1.3.6.1.4.1.2281.10.2.4.20.1.3 |
genEquipNetworkManagmentIpAddrCfgDefaultGatewayThis value indicates the local default gateway.rw IpAddress .1.3.6.1.4.1.2281.10.2.4.20.1.4 |
genEquipNetworkManagmentIpAddrCfgIpv6AddressThis value indicates the Local IPv6.
y is a 16-bit hexadecimal field of the form xxxx, where x takes values from 0 to F.rw OCTET STRING .1.3.6.1.4.1.2281.10.2.4.20.1.5 |
genEquipNetworkManagmentIpAddrCfgIpv6PrefixLengthIPv6 Prefix-Length specifies the IPv6 subnet.rw INTEGER .1.3.6.1.4.1.2281.10.2.4.20.1.6 |
genEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6This value indicates the local IPv6 default gateway.rw OCTET STRING .1.3.6.1.4.1.2281.10.2.4.20.1.7 |
genEquipNetworkIP OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.2.5 |
genEquipNetworkIPTableThis table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery. SEQUENCE OF GenEquipNetworkIPEntry .1.3.6.1.4.1.2281.10.2.5.1 |
genEquipNetworkIPEntryThis table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery. GenEquipNetworkIPEntry .1.3.6.1.4.1.2281.10.2.5.1.1 |
genEquipNetworkIPEthernetPortEthernet port (local port) is the index of the table, to be taken from ifIndex.ro INTEGER .1.3.6.1.4.1.2281.10.2.5.1.1.1 |
genEquipNetworkIPPeerMacAddrThe Peer (far-end) Mac address of the managed NE (CPU) connected on the local Ethernet portrw OCTET STRING .1.3.6.1.4.1.2281.10.2.5.1.1.2 |
genEquipNetworkIPPeerIPAddrThe Peer (far-end) IP address of the managed NE (CPU) connected on the local Ethernet portrw IpAddress .1.3.6.1.4.1.2281.10.2.5.1.1.3 |
genEquipNetworkIPPeerSlotIDThe Peer (far-end) slot-id of the managed NE connected on the local Ethernet port.rw INTEGER .1.3.6.1.4.1.2281.10.2.5.1.1.4 |
genEquipNetworkIPPeerPortNumberThe Peer (far-end) port number of the managed NE connected on the local Ethernet port. The port number is sequential
starting with 1rw INTEGER .1.3.6.1.4.1.2281.10.2.5.1.1.5 |
genEquipNetworkIPPeerDescrUser defined description for the peer portrw DisplayString .1.3.6.1.4.1.2281.10.2.5.1.1.6 |
genEquipNetworkIPPeerNodeToNodeConnectionNode To Node Connection.
This column is relevant only for STM-1/OC-3 connections.
if this parameter is enabled, it means that the STM-1/OC-3 port is connected with another microwave-radio NE,
the STM-1/OC-3 port is not an access port, it is used by the NMS to find TDM trails.rw EnableDisable .1.3.6.1.4.1.2281.10.2.5.1.1.7 |
genEquipNetworkIPClearAllPeerInfoThis parameter is a command to clear the neighbor IP table inforw OffOn .1.3.6.1.4.1.2281.10.2.5.2 |
genEquipNetworkFloatingIpThis value indicates the floating IP used when system is in protection mode.
This address must differ from system's own IP address (genEquipNetworkAgentIp)
as well as mate unit's (genEquipProtectionMateIPAddr)and must be in the same subnet.
A value of 0.0.0.0 will disable the feature.rw IpAddress .1.3.6.1.4.1.2281.10.2.6 |
genEquipNetworkAgentIpV6This value indicates the agent IP V6. This parameter will be use for Trap only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.2.7 |
genEquipServices OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8 |
genEquipEthernetSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1 |
genEquipEthernetSwitchCfg OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.1 |
genEquipEthernetSwitchCfgAppTypeThe mode of the switch application. Note, managed-switch or metro-swtich require license.
Single-pipe: No switching is done, the NE acts as a Pipe.
Managed-switch: The switch application is configured as IEEE 802.1Q switch.
Metro-switch: The switch application is configured as IEEE 802.1ad switch.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.1.1 |
genEquipEthernetSwitchCfgVIDTableThe switch VLAN table. SEQUENCE OF GenEquipEthernetSwitchCfgVIDEntry .1.3.6.1.4.1.2281.10.8.1.1.2 |
genEquipEthernetSwitchCfgVIDEntryThe switch VLAN table. GenEquipEthernetSwitchCfgVIDEntry .1.3.6.1.4.1.2281.10.8.1.1.2.1 |
genEquipEthernetSwitchCfgVIDIndexVLAN number, the index of the table.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.1.2.1.1 |
genEquipEthernetSwitchCfgVIDNameVLAN name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.1.2.1.2 |
genEquipEthernetSwitchCfgVIDStateVLAN state.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.1.2.1.3 |
genEquipEthernetSwitchCfgVIDMemberPortsA string that indicates in which ports this VLAN is allowed. Port numbers are separated by spacesrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.1.2.1.4 |
genEquipEthernetSwitchCfgVIDEVCIDThis parameter defines a name for the Ethernet service running over this VLAN.
This information is used by the NMS as a service identifierrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.1.2.1.5 |
genEquipEthernetSwitchCfgVIDEVCDescriptionThis parameter allows adding a description for the Ethernet service running over this VLAN.
This information is informational only for users purposesrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.1.2.1.6 |
genEquipEthernetSwitchCfgVIDRowStatusThe raw status of the vlan table.rw RowStatus -- active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6) .1.3.6.1.4.1.2281.10.8.1.1.2.1.30 |
genEquipEthernetSwitchCfgPbbteEthertypeThe PBB-TE-Tag ethertype valuerw INTEGER .1.3.6.1.4.1.2281.10.8.1.1.3 |
genEquipEthernetSwitchCfgProviderEthertypeEthertype of the provider VLANS (S-tag). This parameter configures the Marvell switch
and it applys for all the ethernet ports. Possible choises are { 0x8100 , 0x9100 , 0x88A8 , 0x9200 }.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.1.4 |
genEquipEthernetSwitchCfgJumboModeAdminThis configuration defines the Ethernet Maximal Transmit Unit (MTU) size.
When jumbo mode is enabled, MTU=9612 bytes. When disabled, MTU=1632 bytes.
This configuration applies to all Ethernet traffic ports except management portsrw EnableDisable .1.3.6.1.4.1.2281.10.8.1.1.5 |
genEquipEthernetSwitchXSTP OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.2 |
genEquipEthernetSwitchXSTPProtocolSelection of the xSTP protocol. Note that not all protocols may be available in all software releasesrw Enumeration .1.3.6.1.4.1.2281.10.8.1.2.1 |
genEquipEthernetSwitchXSTPParams OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.2.2 |
genEquipEthernetSwitchXSTPBridgeIDThe RSTP bridge IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.2.2.1 |
genEquipEthernetSwitchXSTPRootIDThe RSTP root id.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.2.2.2 |
genEquipEthernetSwitchXSTPRootPathThe RSTP root path cost.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.2.2.3 |
genEquipEthernetSwitchXSTPBridgeRoleThe bridge role.ro Enumeration .1.3.6.1.4.1.2281.10.8.1.2.2.4 |
genEquipEthernetSwitchXSTPCfgPriorityRSTP Bridge priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.2.2.5 |
genEquipEthernetSwitchXSTPParamsEthernetPortsTableRSTP port status table. SEQUENCE OF GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry .1.3.6.1.4.1.2281.10.8.1.2.2.6 |
genEquipEthernetSwitchXSTPParamsEthernetPortsEntryRSTP port status table. GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry .1.3.6.1.4.1.2281.10.8.1.2.2.6.1 |
genEquipEthernetSwitchXSTPParamsEthernetPortsStateRSTP port state.ro Enumeration .1.3.6.1.4.1.2281.10.8.1.2.2.6.1.1 |
genEquipEthernetSwitchXSTPParamsEthernetPortsRoleRSTP port role.ro Enumeration .1.3.6.1.4.1.2281.10.8.1.2.2.6.1.2 |
genEquipEthernetSwitchXSTPParamsEthernetPortsPathCostRSTP configured path cost.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.2.2.6.1.3 |
genEquipEthernetSwitchXSTPParamsEthernetPortsPriorityRSTP configured port priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.2.2.6.1.4 |
genEquipEthernetSwitchXSTPParamsEthernetDesPathCostRSTP designated path cost. This is the path cost to the root port from this local port.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.2.2.6.1.5 |
genEquipEthernetSwitchXSTPParamsEthernetEdgePortThis parameter indicates if the port is an Edge port or not.rw NoYes .1.3.6.1.4.1.2281.10.8.1.2.2.6.1.6 |
genEquipEthernetSwitchQoS OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.3 |
genEquipEthernetSwitchQoSTableThe switch application, QoS Table. SEQUENCE OF GenEquipEthernetSwitchQoSEntry .1.3.6.1.4.1.2281.10.8.1.3.1 |
genEquipEthernetSwitchQoSEntryThe switch application, QoS Table, per Ethernet port based on ifIndex. GenEquipEthernetSwitchQoSEntry .1.3.6.1.4.1.2281.10.8.1.3.1.1 |
genEquipEthernetSwitchQoSFirstCritFirst classification criteria. This is the first criteria which will be evaluated for incoming frames.
queueDecision causes classification by defined static MAC address.
pbitOverride causes classification by pbits.
queueAndPbitOverridecauses classification by defined static MAC address, and changes the pbits accordingly.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.3.1.1.1 |
genEquipEthernetSwitchQoSSecondCritSecond classification criteria. Applicable if match with first criteria is not found.
queueDecision causes classification by defined VLAN to queue mapping.
pbitOverride causes classification by pbits.
queueAndPbitOverrideclassification by defined VLAN to queue mapping, and changes the pbits accordingly.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.3.1.1.2 |
genEquipEthernetSwitchQoSThirdCritThird classification criteria. Applicable if match with first or second criteria is not found.
ipTosPriority causes classification by defined IP TOS to queue mapping only.
vlanPbitspriority causes classification by pbits only.
ipTosOverVlanPbitsPriority causes classification by IP TOS and then by pbits .
ipTosOverVlanPbitsPriority causes classification by pbits and then by IP TOS.
portPriority causes port-based classification according to port priority.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.3.1.1.3 |
genEquipEthernetSwitchQoSDefClassificationDefault classification for frame that does suit to the previous classifications.
Choosing first will classify this frame as the first criteria for example.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.3.1.1.4 |
genEquipEthernetSwitchQoSEgressSchedEgress scheduler options.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.3.1.1.5 |
genEquipEthernetSwitchQoSEgressShaperEnable/Disable egress shaping.rw OffOn .1.3.6.1.4.1.2281.10.8.1.3.1.1.6 |
genEquipEthernetSwitchQoSEgressShaperRateEgress shaper rate.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.3.1.1.7 |
genEquipEthernetSwitchQoSIngressPolicerIngress policer (rate limiting) name assiciated with this port.
The policer Name is defined in genEquipEthernetSwitchQoSPolicerNameName (in a table)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.3.1.1.8 |
genEquipEthernetSwitchVlanPbitRemapTableVLAN priority bits remapping table. SEQUENCE OF GenEquipEthernetSwitchVlanPbitRemapEntry .1.3.6.1.4.1.2281.10.8.1.3.2 |
genEquipEthernetSwitchVlanPbitRemapEntryVLAN priority bits remap table. GenEquipEthernetSwitchVlanPbitRemapEntry .1.3.6.1.4.1.2281.10.8.1.3.2.1 |
genEquipEthernetSwitchVlanPbitRemapPbitThe ingress Pbit.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.3.2.1.1 |
genEquipEthernetSwitchVlanPbitRemapRemappedPbitThe remapped Pbit.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.3.2.1.2 |
genEquipEthernetSwitchQoSVLANIdToQueueTableVLAN Id to Queue mapping table. SEQUENCE OF GenEquipEthernetSwitchQoSVLANIdToQueueEntry .1.3.6.1.4.1.2281.10.8.1.3.3 |
genEquipEthernetSwitchQoSVLANIdToQueueEntryVLAN Id to Queue mapping table. GenEquipEthernetSwitchQoSVLANIdToQueueEntry .1.3.6.1.4.1.2281.10.8.1.3.3.1 |
genEquipEthernetSwitchQoSVLANIdToQueueQueueQueue for the vlan.rw QueueName .1.3.6.1.4.1.2281.10.8.1.3.3.1.1 |
genEquipEthernetSwitchQoSIPPbits OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.3.4 |
genEquipEthernetSwitchQoSIPPbitsIPPrioIP priority options.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.3.4.1 |
genEquipEthernetSwitchQoSIPPbitsTableMapping of IP pbits to Queue. SEQUENCE OF GenEquipEthernetSwitchQoSIPPbitsEntry .1.3.6.1.4.1.2281.10.8.1.3.4.2 |
genEquipEthernetSwitchQoSIPPbitsEntryMapping of IP pbits to Queue. GenEquipEthernetSwitchQoSIPPbitsEntry .1.3.6.1.4.1.2281.10.8.1.3.4.2.1 |
genEquipEthernetSwitchQoSIPPbitsIdThe pbit number.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.3.4.2.1.1 |
genEquipEthernetSwitchQoSIPPbitsQueuethe queue for that pbit.rw QueueName .1.3.6.1.4.1.2281.10.8.1.3.4.2.1.2 |
genEquipEthernetSwitchQoSVLANPbitsTableVLAN pbit to queue mapping table. SEQUENCE OF GenEquipEthernetSwitchQoSVLANPbitsEntry .1.3.6.1.4.1.2281.10.8.1.3.5 |
genEquipEthernetSwitchQoSVLANPbitsEntryVLAN pbit to queue mapping table. GenEquipEthernetSwitchQoSVLANPbitsEntry .1.3.6.1.4.1.2281.10.8.1.3.5.1 |
genEquipEthernetSwitchQoSVLANPbitsIdThe VLAN'S pbit (index of the table)ro INTEGER .1.3.6.1.4.1.2281.10.8.1.3.5.1.1 |
genEquipEthernetSwitchQoSVLANPbitsQueueThe mapped queue for the corresponding VLAN .rw QueueName .1.3.6.1.4.1.2281.10.8.1.3.5.1.2 |
genEquipEthernetSwitchQoSQueueWeightsTableQueue weights mapping table. SEQUENCE OF GenEquipEthernetSwitchQoSQueueWeightsEntry .1.3.6.1.4.1.2281.10.8.1.3.6 |
genEquipEthernetSwitchQoSQueueWeightsEntryQueue weights mapping table. GenEquipEthernetSwitchQoSQueueWeightsEntry .1.3.6.1.4.1.2281.10.8.1.3.6.1 |
genEquipEthernetSwitchQoSQueueWeightsIdIndex for this table.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.3.6.1.1 |
genEquipEthernetSwitchQoSQueueWeightsQueueThe queue number.ro QueueName .1.3.6.1.4.1.2281.10.8.1.3.6.1.2 |
genEquipEthernetSwitchQoSQueueWeightsWeightThe weight for the queuerw INTEGER .1.3.6.1.4.1.2281.10.8.1.3.6.1.3 |
genEquipEthernetSwitchQoSPolicerNameTableTable of configured policers. SEQUENCE OF GenEquipEthernetSwitchQoSPolicerNameEntry .1.3.6.1.4.1.2281.10.8.1.3.7 |
genEquipEthernetSwitchQoSPolicerNameEntryTable of configured policers. GenEquipEthernetSwitchQoSPolicerNameEntry .1.3.6.1.4.1.2281.10.8.1.3.7.1 |
genEquipEthernetSwitchQoSPolicerNameIdPolicer IDro INTEGER .1.3.6.1.4.1.2281.10.8.1.3.7.1.1 |
genEquipEthernetSwitchQoSPolicerNameNamePolicer name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.3.7.1.2 |
genEquipEthernetSwitchQoSPolicerNameRowStatusPolicer row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.3.7.1.30 |
genEquipEthernetSwitchQoSPolicerListTableThe policer class table list. SEQUENCE OF GenEquipEthernetSwitchQoSPolicerListEntry .1.3.6.1.4.1.2281.10.8.1.3.8 |
genEquipEthernetSwitchQoSPolicerListEntryThe policer class table list. GenEquipEthernetSwitchQoSPolicerListEntry .1.3.6.1.4.1.2281.10.8.1.3.8.1 |
genEquipEthernetSwitchQoSPolicerListIdThe policer ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.3.8.1.1 |
genEquipEthernetSwitchQoSPolicerListNameThe policer class namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.3.8.1.2 |
genEquipEthernetSwitchQoSPolicerListClassNameThe policer class namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.3.8.1.3 |
genEquipEthernetSwitchQoSPolicerListTrafficTypeThe traffic type that the policer applies to.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.3.8.1.4 |
genEquipEthernetSwitchQoSPolicerListCIRThe CIR (Critical Information Rate) value (in Kbps)rw INTEGER .1.3.6.1.4.1.2281.10.8.1.3.8.1.5 |
genEquipEthernetSwitchQoSPolicerListCBSThe CBS (Critical Burst Size) value (in Bytes)rw INTEGER .1.3.6.1.4.1.2281.10.8.1.3.8.1.6 |
genEquipEthernetSwitchQoSPolicerListRowStatusRow status of the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.3.8.1.30 |
genEquipEthernetSwitchQoSStaticMacTableStatic MAC forwarding table. SEQUENCE OF GenEquipEthernetSwitchQoSStaticMacEntry .1.3.6.1.4.1.2281.10.8.1.3.9 |
genEquipEthernetSwitchQoSStaticMacEntryStatic MAC forwarding table. GenEquipEthernetSwitchQoSStaticMacEntry .1.3.6.1.4.1.2281.10.8.1.3.9.1 |
genEquipEthernetSwitchQoSStaticMacIdThe index of the tablero INTEGER .1.3.6.1.4.1.2281.10.8.1.3.9.1.1 |
genEquipEthernetSwitchQoSStaticMacAddrStatic MAC Address.rw OCTET STRING .1.3.6.1.4.1.2281.10.8.1.3.9.1.2 |
genEquipEthernetSwitchQoSStaticMacVlanIdVLAN ID for this MAC.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.3.9.1.3 |
genEquipEthernetSwitchQoSStaticMacForwardToThe port number to be forwarded to, starting from 1.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.3.9.1.4 |
genEquipEthernetSwitchQoSStaticMacPriorityThe priority to be given to this MAC address.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.3.9.1.5 |
genEquipEthernetSwitchQoSStaticMacRowStatusThe row status of the operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.3.9.1.30 |
genEquipEthernetSwitchLag OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.4 |
genEquipEthernetSwitchLagDistFunctionLAG distribution function.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.4.1 |
genEquipEthernetSwitchLagMaxNumberMax number of LAG port groups.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.4.2 |
genEquipEthernetSwitchETM OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5 |
genEquipEthernetSwitchEtmAdminEnabling/Disabling the entire enhanced TM functionality.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.1 |
genEquipEthernetSwitchEtmPTPOptimizedTransportModeAdminPrecision Time Protocol low PDV channel admin Upon enabling all the packets classified to the 8th
queue will bypass the scheduler and will be sent directly to the Radio Frame.
Enabling this parameter will fail if Wayside is enabled.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.2 |
genEquipEthernetSwitchEtmCountersClearReset selected module's counters.rw OffOn .1.3.6.1.4.1.2281.10.8.1.5.3 |
genEquipEthernetSwitchEtmPTPOptimizedTransportModePTP optimized transport channel operation mode. In High-CoS-Queue-8 mode all the frames that will be classified
to the 8th queue in the traffic manager will be send to the PTP optimized transport channel.
In IEEE-1588 mode IEEE 1588 frames will be identified automatically based on UDP ports and/or ethertypes.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.5.4 |
genEquipEthernetSwitchEtmClassifier OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6 |
genEquipEthernetSwitchEtmClassifierByMac OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.1 |
genEquipEthernetSwitchEtmClassifierByMacAdminEnabling/Disabling CoS and color classification by destination MAC addresses.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.6.1.1 |
genEquipEthernetSwitchEtmClassifierByMacTableTable for CoS and color classification by destination MAC address. SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByMacEntry .1.3.6.1.4.1.2281.10.8.1.5.6.1.2 |
genEquipEthernetSwitchEtmClassifierByMacEntryTable for CoS and color classification by destination MAC address. GenEquipEthernetSwitchEtmClassifierByMacEntry .1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1 |
genEquipEthernetSwitchEtmClassifierByMacIndexThe index is pointing to a table entry. Each entry contains different MAC address.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.1 |
genEquipEthernetSwitchEtmClassifierByMacValueMAC Address value for CoS Classification by MAC Table Entry.rw OCTET STRING .1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.2 |
genEquipEthernetSwitchEtmClassifierByMacCosCoS value for CoS Classification by MAC Table Entry.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.3 |
genEquipEthernetSwitchEtmClassifierByMacColorColor value for CoS Classification by MAC Table Entry.rw GreenYellow .1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.4 |
genEquipEthernetSwitchEtmClassifierByMacRowStatusRow Status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.30 |
genEquipEthernetSwitchEtmClassifierByUdpPort OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.2 |
genEquipEthernetSwitchEtmClassifierByUdpPortAdminEnabling/Disabling CoS and color classification by UDP source and/or destination ports.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.6.2.1 |
genEquipEthernetSwitchEtmClassifierByUdpPortTableTable for CoS and color classification by UDP ports. Classification may be based on source port,
dest port ,or both - use validity parameter. SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByUdpPortEntry .1.3.6.1.4.1.2281.10.8.1.5.6.2.2 |
genEquipEthernetSwitchEtmClassifierByUdpPortEntryEntry for CoS and color classification by UDP ports. Classification may be based on source port,
dest port ,or both - use validity parameter. GenEquipEthernetSwitchEtmClassifierByUdpPortEntry .1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1 |
genEquipEthernetSwitchEtmClassifierByUdpPortIndexThe index is pointing to a table entry. Each entry contains different UDP source and destination ports.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.1 |
genEquipEthernetSwitchEtmClassifierByUdpPortSrcPortUDP source port value for CoS Classification by UDP ports Table Entry.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.2 |
genEquipEthernetSwitchEtmClassifierByUdpPortDestPortUDP dest. port value for CoS Classification by UDP ports Table Entry.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.3 |
genEquipEthernetSwitchEtmClassifierByUdpPortCosCoS value for CoS Classification by UDP Ports Table Entry.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.4 |
genEquipEthernetSwitchEtmClassifierByUdpPortColorColor value for CoS Classification by UDP ports Table Entry.rw GreenYellow .1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.5 |
genEquipEthernetSwitchEtmClassifierByUdpPortValidityValidity value for CoS Classification by UDP ports Table Entry.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.6 |
genEquipEthernetSwitchEtmClassifierByUdpPortRowStatusRow Status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.30 |
genEquipEthernetSwitchEtmClassifierByKnownPduMac OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.4 |
genEquipEthernetSwitchEtmClassifierByKnownPduMacAdminEnabling/Disabling CoS and color classification by known PDU MAC addresses.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.6.4.1 |
genEquipEthernetSwitchEtmClassifierByKnownPduMacTableTable for CoS and color classification by known PDU MAC addresses. SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry .1.3.6.1.4.1.2281.10.8.1.5.6.4.2 |
genEquipEthernetSwitchEtmClassifierByKnownPduMacEntryTable entry for CoS and color classification by known PDU MAC addresses. GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry .1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1 |
genEquipEthernetSwitchEtmClassifierByKnownPduMacIndexThe index is pointing to a table entry. Each entry contains different PDU MAC address value.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.1 |
genEquipEthernetSwitchEtmClassifierByKnownPduMacAddressCoS value for MAC address Classification by known PDU Table Entry.ro OCTET STRING .1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.2 |
genEquipEthernetSwitchEtmClassifierByKnownPduMacCosCoS value for CoS Classification by known PDU Table Entry.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.3 |
genEquipEthernetSwitchEtmClassifierByKnownPduMacColorColor value for CoS Classification by known PDU Table Entry.rw GreenYellow .1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.4 |
genEquipEthernetSwitchEtmClassifierByKnownPduMacValidityValidity value for Cos Classification by known PDU Table Entry.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.5 |
genEquipEthernetSwitchEtmClassifierByService OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.5 |
genEquipEthernetSwitchEtmClassifierByServiceAdminEnabling/Disabling CoS and color classification by service IDs.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.6.5.1 |
genEquipEthernetSwitchEtmClassifierByServiceTableTable for CoS and color classification by service-ids. SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByServiceEntry .1.3.6.1.4.1.2281.10.8.1.5.6.5.2 |
genEquipEthernetSwitchEtmClassifierByServiceEntryTable entry for CoS and color classification by service-ids. GenEquipEthernetSwitchEtmClassifierByServiceEntry .1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1 |
genEquipEthernetSwitchEtmClassifierByServiceIndexThe index is pointing to a table entry. Each entry contains a mapping of service-id to CoS.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.1 |
genEquipEthernetSwitchEtmClassifierByServiceCosCoS value for CoS serviceID Mapping Table Entry.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.2 |
genEquipEthernetSwitchEtmClassifierByServiceColorColor value for CoS serviceId Mapping Table Entry.rw GreenYellow .1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.3 |
genEquipEthernetSwitchEtmClassifierByServiceUsageValidity value for CoS serviceID Mapping Table Entry.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.4 |
genEquipEthernetSwitchEtmClassifierByVlanPbits OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.6 |
genEquipEthernetSwitchEtmClassifierByVlanPbitsAdminEnabling/Disabling CoS and color classification by VLAN P-bits and CFI/DEI bit.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.6.6.1 |
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanTableTable for CoS and color classification by VLAN S-tag P-bits and DEI bit. SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry .1.3.6.1.4.1.2281.10.8.1.5.6.6.2 |
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntryTable entry for CoS and color classification by VLAN S-tag P-bits and DEI bit. GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry .1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1 |
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndexPbit vlan index to table.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.1 |
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriorityPbit value for regular classification prioritization.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.2 |
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDeiDEI value for regular classification prioritization by S-tag vlan.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.3 |
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCosCoS value for regular classification prioritization by S-tag VLAN.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.4 |
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColorColor value for regular classification prioritization by S-tag VLAN.rw GreenYellow .1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.5 |
genEquipEthernetSwitchEtmClassifierByDscp OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.7 |
genEquipEthernetSwitchEtmClassifierByDscpAdminEnabling/Disabling Cos and color classification by DSCP/TOS bits.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.6.7.1 |
genEquipEthernetSwitchEtmClassifierByDscpTableTable for CoS and color classification by DSCP/TOS bits. SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByDscpEntry .1.3.6.1.4.1.2281.10.8.1.5.6.7.2 |
genEquipEthernetSwitchEtmClassifierByDscpEntryTable entry for CoS and color classification by DSCP/TOS bits. GenEquipEthernetSwitchEtmClassifierByDscpEntry .1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1 |
genEquipEthernetSwitchEtmClassifierByDscpValueThe index is pointing to a table entry. Each entry contains different DSCP/TOS bits mapping.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.1 |
genEquipEthernetSwitchEtmClassifierByDscpCosCoS value for regular classification prioritization by DSCP-tag.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.2 |
genEquipEthernetSwitchEtmClassifierByDscpColorColor value for regular classification prioritization by MPLS.rw GreenYellow .1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.3 |
genEquipEthernetSwitchEtmClassifierByMplsExp OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.8 |
genEquipEthernetSwitchEtmClassifierByMplsExpAdminEnabling/Disabling CoS and color classification by MPLS experimantal bits.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.6.8.1 |
genEquipEthernetSwitchEtmClassifierByMplsExpTableTable for CoS and color classification by MPLS experimental bits. SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByMplsExpEntry .1.3.6.1.4.1.2281.10.8.1.5.6.8.2 |
genEquipEthernetSwitchEtmClassifierByMplsExpEntryTable entry for CoS and color classification by MPLS experimental bits. GenEquipEthernetSwitchEtmClassifierByMplsExpEntry .1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1 |
genEquipEthernetSwitchEtmClassifierByMplsExpValueThe index is pointing to a table entry. Each entry contains different MPLS experimantal bits mapping.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.1 |
genEquipEthernetSwitchEtmClassifierByMplsExpCosvalue for regular classification prioritization by MPLS.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.2 |
genEquipEthernetSwitchEtmClassifierByMplsExpColorColor value for regular classification prioritization by MPLS.rw GreenYellow .1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.3 |
genEquipEthernetSwitchEtmClassifierByDefaultCosColor OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.9 |
genEquipEthernetSwitchEtmClassifierByDefaultCosCoS value for regular classification prioritization by default port.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.9.1 |
genEquipEthernetSwitchEtmClassifierByDefaultColorTable for regular priority by default port mapping table.rw GreenYellow .1.3.6.1.4.1.2281.10.8.1.5.6.9.2 |
genEquipEthernetSwitchEtmClassifierByCosToQueue OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.10 |
genEquipEthernetSwitchEtmClassifierByCosToQueueTableTable for VLAN to FlowId mapping . SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry .1.3.6.1.4.1.2281.10.8.1.5.6.10.1 |
genEquipEthernetSwitchEtmClassifierByCosToQueueEntryTable for VLAN to FlowId mapping . GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry .1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1 |
genEquipEthernetSwitchEtmClassifierByCosToQueueIndexThe index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1.1 |
genEquipEthernetSwitchEtmClassifierByCosToQueueValueQueue index for CoS to Queue Mapping Table Entry.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1.2 |
genEquipEthernetSwitchEtmClassifierVlanidToService OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.11 |
genEquipEthernetSwitchEtmClassifierVlanidToServiceTableTable for VLAN to Vlan To Servies mapping . SEQUENCE OF GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry .1.3.6.1.4.1.2281.10.8.1.5.6.11.1 |
genEquipEthernetSwitchEtmClassifierVlanidToServiceEntryTable for VLAN to Vlan To Servies mapping . GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry .1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1 |
genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndexThe index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1.1 |
genEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValueService ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1.2 |
genEquipEthernetSwitchEtmClassifierInbandMgmtQoS OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.6.12 |
genEquipEthernetSwitchEtmClassifierInbandMgmtAdminEnabling/Disabling CoS and Color classification by VLAN ID.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.6.12.1 |
genEquipEthernetSwitchEtmClassifierInbandMgmtVlanIdInband Management vlan id. This parameter should be the same as genEquipEthernetSwitchEtmClassifierInbandMgmtVlanId.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.12.2 |
genEquipEthernetSwitchEtmClassifierInbandMgmtCosClass of Service. Allowed values: [0-7].rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.6.12.3 |
genEquipEthernetSwitchEtmClassifierInbandMgmtColorColor 1=green ; 0=yellow.rw GreenYellow .1.3.6.1.4.1.2281.10.8.1.5.6.12.4 |
genEquipEthernetSwitchEtmPolicers OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.8 |
genEquipEthernetSwitchEtmPolicerModuleAdminEnabling/Disabling Policing.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.8.1 |
genEquipEthernetSwitchEtmServiceToPolicerTableTable of Service to Policeer mapping. SEQUENCE OF GenEquipEthernetSwitchEtmServiceToPolicerEntry .1.3.6.1.4.1.2281.10.8.1.5.8.2 |
genEquipEthernetSwitchEtmServiceToPolicerEntryTable of Service to Policeer mapping. GenEquipEthernetSwitchEtmServiceToPolicerEntry .1.3.6.1.4.1.2281.10.8.1.5.8.2.1 |
genEquipEthernetSwitchEtmServiceToPolicerIndexService Index.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.8.2.1.1 |
genEquipEthernetSwitchEtmServiceToPolicerValuePolicer to be used for the specific Service.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.8.2.1.2 |
genEquipEthernetSwitchEtmServiceToPolicerPerCosOptionPolicer per CoS option. If enabled, each Service will be mapped to 8 policers while each policer will be used
for a different CoS value. This option can be used only for the pilicers with indeces of multiple of 8. i.e 8,16,24,32,240,248.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.8.2.1.3 |
genEquipEthernetSwitchEtmPolicerConfigTableTable of Policers configuration. SEQUENCE OF GenEquipEthernetSwitchEtmPolicerConfigEntry .1.3.6.1.4.1.2281.10.8.1.5.8.3 |
genEquipEthernetSwitchEtmPolicerConfigEntryTable of Policers configuration. GenEquipEthernetSwitchEtmPolicerConfigEntry .1.3.6.1.4.1.2281.10.8.1.5.8.3.1 |
genEquipEthernetSwitchEtmPolicerConfigIndexService Index.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.8.3.1.1 |
genEquipEthernetSwitchEtmPolicerConfigAdminEgress policer admin disables/enables the policing feature per policer.
If not enabled, the policer is in bypass mode (no rate limiting).rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.8.3.1.2 |
genEquipEthernetSwitchEtmPolicerConfigColorAwareWhether policer is color aware.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.8.3.1.3 |
genEquipEthernetSwitchEtmPolicerConfigCirEgress policer CIR value - the committed rate user requests.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.8.3.1.4 |
genEquipEthernetSwitchEtmPolicerConfigCbsEgress policer committed burst size value.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.8.3.1.5 |
genEquipEthernetSwitchEtmPolicerConfigEirEgress policer EIR value - the excess rate user requests.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.8.3.1.6 |
genEquipEthernetSwitchEtmPolicerConfigEbsEgress policer excess burst size value (bytes).rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.8.3.1.7 |
genEquipEthernetSwitchEtmPolicerConfigCouplingEgress policer coupling mode.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.8.3.1.8 |
genEquipEthernetSwitchEtmPolicerConfigLineCompEgress policer line compensation value (bytes).rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.8.3.1.9 |
genEquipEthernetSwitchEtmQueues OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.9 |
genEquipEthernetSwitchEtmQueuesTableTable of queue sizes. SEQUENCE OF GenEquipEthernetSwitchEtmQueuesEntry .1.3.6.1.4.1.2281.10.8.1.5.9.1 |
genEquipEthernetSwitchEtmQueuesEntryTable entry of queue sizes. GenEquipEthernetSwitchEtmQueuesEntry .1.3.6.1.4.1.2281.10.8.1.5.9.1.1 |
genEquipEthernetSwitchEtmQueuesIndexThe Index to a queue.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.9.1.1.1 |
genEquipEthernetSwitchEtmQueuesSizeSize of queue[i]rw Enumeration .1.3.6.1.4.1.2281.10.8.1.5.9.1.1.2 |
genEquipEthernetSwitchEtmWred OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.10 |
genEquipEthernetSwitchEtmWredAdminEnabling/Disabling WRED.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.10.1 |
genEquipEthernetSwitchEtmWredThresholdsTableWRED thresholds per queue. SEQUENCE OF GenEquipEthernetSwitchEtmWredThresholdsEntry .1.3.6.1.4.1.2281.10.8.1.5.10.2 |
genEquipEthernetSwitchEtmWredThresholdsEntryWRED entry thresholds per queue. GenEquipEthernetSwitchEtmWredThresholdsEntry .1.3.6.1.4.1.2281.10.8.1.5.10.2.1 |
genEquipEthernetSwitchEtmWredQueuesIndexWRED thresholds per queue.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.10.2.1.1 |
genEquipEthernetSwitchEtmWredThresholdsGreenThLowWRED green low threshold defines the queue level (in Kbits) point
that the mechanism should start checking if to drop the green frames.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.10.2.1.2 |
genEquipEthernetSwitchEtmWredThresholdsGreenThHighWRED green high threshold defines the queue level of occupancy (in Kbits) point that the WRED
must drop all arriving green colored frames.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.10.2.1.3 |
genEquipEthernetSwitchEtmWredThresholdsYellowThLowWRED yellow low threshold defines the queue level (in Kbits) point that the mechanism should
start checking if to drop the yellow frames.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.10.2.1.4 |
genEquipEthernetSwitchEtmWredThresholdsYellowThHighWRED yellow high threshold defines the queue level of occupancy (in Kbits) point that the WRED
must drop all arriving yellow colored frames.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.10.2.1.5 |
genEquipEthernetSwitchEtmWredThresholdsGreenMaxDropWRED green max drop threshold the probability to drop frame at the green high threshold (in percent based units).rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.10.2.1.6 |
genEquipEthernetSwitchEtmWredThresholdsYellowMaxDropWRED yellow max drop threshold the probability to drop frame at the yellow high threshold (in percent based units).rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.10.2.1.7 |
genEquipEthernetSwitchEtmMarker OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.11 |
genEquipEthernetSwitchEtmMarkerAdminEnabling/Disabling marking of VLAN P-bits and DEI/CFI bit at the egress.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.11.1 |
genEquipEthernetSwitchEtmMarkerTableTable of CoS and color to Pbits and DEI marking for S-VALNS. SEQUENCE OF GenEquipEthernetSwitchEtmMarkerEntry .1.3.6.1.4.1.2281.10.8.1.5.11.2 |
genEquipEthernetSwitchEtmMarkerEntryTable of CoS and color to Pbits and DEI marking for S-VALNS. GenEquipEthernetSwitchEtmMarkerEntry .1.3.6.1.4.1.2281.10.8.1.5.11.2.1 |
genEquipEthernetSwitchEtmMarkerCoSCoS value as was mapped by the TM calssifier.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.11.2.1.1 |
genEquipEthernetSwitchEtmMarkerColorColor value as was mapped by the TM calssifier.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.11.2.1.2 |
genEquipEthernetSwitchEtmMarkerPbitVLAN 802.1p P-bit value to be modified.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.11.2.1.3 |
genEquipEthernetSwitchEtmMarkerCfiVLAN CFI/DEI value to be modified.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.11.2.1.4 |
genEquipEthernetSwitchEtmScheduler OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.12 |
genEquipEthernetSwitchEtmSchedulerQuantumWFQ Quantum for credit calculation in bytes (64, 128, 256, 512).rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.12.1 |
genEquipEthernetSwitchEtmSchedulerConfigTableTable for scheduler configuration: priority and weight for each queue. SEQUENCE OF GenEquipEthernetSwitchEtmSchedulerConfigEntry .1.3.6.1.4.1.2281.10.8.1.5.12.2 |
genEquipEthernetSwitchEtmSchedulerConfigEntryTable entry for scheduler configuration: priority and weight for each queue. GenEquipEthernetSwitchEtmSchedulerConfigEntry .1.3.6.1.4.1.2281.10.8.1.5.12.2.1 |
genEquipEthernetSwitchEtmSchedulerConfigQueueIndexqueue index.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.12.2.1.1 |
genEquipEthernetSwitchEtmSchedulerConfigPriorityStrict priority of each queue. 4=highest , 1=lowest.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.12.2.1.2 |
genEquipEthernetSwitchEtmSchedulerConfigWeightWFQ Weights for each queuerw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.12.2.1.3 |
genEquipEthernetSwitchEtmShaper OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.13 |
genEquipEthernetSwitchEtmShaperGlobalAdminGlobal Shaper admin disables/enables the global shaping feature.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.13.1 |
genEquipEthernetSwitchEtmShaperConfigTableTable of shapers' configurations. Each shaper is on the egress of a queue.. SEQUENCE OF GenEquipEthernetSwitchEtmShaperConfigEntry .1.3.6.1.4.1.2281.10.8.1.5.13.2 |
genEquipEthernetSwitchEtmShaperConfigEntryTable entry of shapers' configurations. Each shaper is on the egress of a queue.. GenEquipEthernetSwitchEtmShaperConfigEntry .1.3.6.1.4.1.2281.10.8.1.5.13.2.1 |
genEquipEthernetSwitchEtmShaperConfigIndexqueue index.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.13.2.1.1 |
genEquipEthernetSwitchEtmShaperConfigAdminEgress Shaper admin disables/enables the shaping feature per queue.rw EnableDisable .1.3.6.1.4.1.2281.10.8.1.5.13.2.1.2 |
genEquipEthernetSwitchEtmShaperConfigCirEgress shaper CIR value - the committed rate as given by the user.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.13.2.1.3 |
genEquipEthernetSwitchEtmShaperConfigCbsEgress shaper committed burst size value.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.13.2.1.4 |
genEquipEthernetSwitchEtmShaperConfigLineCompEgress shaper line compensation value transmitted IFG + Preamble.
The shaper adds this value to each arriving frame size.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.5.13.2.1.5 |
genEquipEthernetSwitchEtmStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.5.14 |
genEquipEthernetSwitchEtmStatisticsPortTotalBytesTransmittedThe number of bytes transmitted via the port (goes into PM).ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.14.1 |
genEquipEthernetSwitchEtmStatisticsPortTotalUnicastFramesTransmittedTThe number of Unicast frames transmitted to the radio port..ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.14.2 |
genEquipEthernetSwitchEtmStatisticsPortTotalMulticastFramesTransmittedThe number of Multicast frames transmitted to the radio port..ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.14.3 |
genEquipEthernetSwitchEtmStatisticsPortTotalBroadcastFramesTransmittedThe number of Broadcast frames transmitted to the radio port..ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.14.4 |
genEquipEthernetSwitchEtmStatisticsPortFrames64octTransmittedThe total number of frames transmitted with a length of exactly 64 Octets.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.14.5 |
genEquipEthernetSwitchEtmStatisticsPortFrames65to127TransmittedThe total number of frames transmitted with a length of 65-127 Octets.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.14.6 |
genEquipEthernetSwitchEtmStatisticsPortFrames128to255TransmittedThe total number of frames transmitted with a length of 128-255 Octets.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.14.7 |
genEquipEthernetSwitchEtmStatisticsPortFrames256to511TransmittedThe total number of frames transmitted with a length of 256-511 Octets).ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.14.8 |
genEquipEthernetSwitchEtmStatisticsPortFrames512to1023TransmittedTThe total number of frames transmitted with a length of 512-1023 Octets.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.14.9 |
genEquipEthernetSwitchEtmStatisticsPortFrames1024toMtuTransmittedThe total number of frames transmitted with a length between 1024 and MaxTransmitSize Octets.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.5.14.10 |
genEquipProtocols OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.6 |
genEquipProtocolsMstp OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.6.1 |
genEquipProtocolsMstpGeneralAttributesTableA table containing NE configuration and maintenance attributes which are not part of the standard MIB. SEQUENCE OF GenEquipProtocolsMstpGeneralAttributesEntry .1.3.6.1.4.1.2281.10.8.1.6.1.1 |
genEquipProtocolsMstpGeneralAttributesEntryA table containing NE configuration and maintenance attributes which are not part of the standard MIB. GenEquipProtocolsMstpGeneralAttributesEntry .1.3.6.1.4.1.2281.10.8.1.6.1.1.1 |
genEquipProtocolsMstpGeneralAttributesComponentIdDistinguished between multiple virtual bridge instances within a PB or PBB. In simple situations, i.e. single component the default is 1ro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.1.1.1 |
genEquipProtocolsMstpGeneralAttributesMstpEnabledWhen set, MSTP protocol is enabled on NErw TrueFalse .1.3.6.1.4.1.2281.10.8.1.6.1.1.1.2 |
genEquipProtocolsMstpGeneralAttributesNumberOfinstancesSpecifies number of instances supported. Value ranges from 2 to 16.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.1.1.3 |
genEquipProtocolsMstpGeneralAttributesMigrateTimeWhen MSTP bridge detects the presence of STP data on one of its ports,
it migrates after 'MigrateTime' has elapsed, if migrate is enabled.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.1.1.4 |
genEquipProtocolsMstpGeneralAttributesBpduDestinationMACWhen set to 'customer', BPDU Dest MAC address should be set to 0x0180-C200-0000.
Otherwise, BPDU Dest MAC address should be set to 0x0180-C200-0008rw Enumeration .1.3.6.1.4.1.2281.10.8.1.6.1.1.1.5 |
genEquipProtocolsMstpGeneralAttributesFrozenWhen set, MSTP protocol stops running in NE., i.e. BPDU are neither processed nor transmitted.
All ports states are maintained.rw TrueFalse .1.3.6.1.4.1.2281.10.8.1.6.1.1.1.6 |
genEquipProtocolsMstpGeneralAttributesSdHandlingWhen set to 'ignored', SD (Signal Degrade) failures are ignored in MSTP. Otherwise, SD failures are treated same as SF.rw Enumeration .1.3.6.1.4.1.2281.10.8.1.6.1.1.1.7 |
genEquipProtocolsMstpGeneralAttributesResetWhen set to reset, MSTP Protocol suit is resetrw Enumeration .1.3.6.1.4.1.2281.10.8.1.6.1.1.1.8 |
genEquipProtocolsMstpGeneralAttributesResetCountersWhen set to reset, MSTP counters are resetrw Enumeration .1.3.6.1.4.1.2281.10.8.1.6.1.1.1.9 |
genEquipProtocolsMstpCountersTableA table containing MSTP counters per instance per port. SEQUENCE OF GenEquipProtocolsMstpCountersEntry .1.3.6.1.4.1.2281.10.8.1.6.1.2 |
genEquipProtocolsMstpCountersEntryA table containing MSTP counters per instance per port. GenEquipProtocolsMstpCountersEntry .1.3.6.1.4.1.2281.10.8.1.6.1.2.1 |
genEquipProtocolsMstpCountersPortIdPort ID (ifIndex)ro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.2.1.1 |
genEquipProtocolsMstpCountersNumberOfReceivedTCNNumber of received TCNro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.2.1.2 |
genEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpduNumber of received Configuration BPDU.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.2.1.3 |
genEquipProtocolsMstpCountersNumberOfReceivedRstBpduNumber of received RST BPDU.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.2.1.4 |
genEquipProtocolsMstpCountersNumberOfReceivedMstBpduNumber of received MST BPDUro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.2.1.5 |
genEquipProtocolsMstpCountersNumberOfTransmittedTcnBpduNumber Of Transmitted TCN BPDU.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.2.1.6 |
genEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpduNumber of transmitted Configuration BPDU.ro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.2.1.7 |
genEquipProtocolsMstpCountersNumberOfTransmittedRstBpduNumber of transmitted RST BPDUro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.2.1.8 |
genEquipProtocolsMstpCountersNumberOfTransmittedMstBpduNumber of transmitted MST BPDUro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.1.2.1.9 |
genEquipProtocolsEoam OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.6.2 |
genEquipProtocolsEoamBwVsmTableA Table containing Ethernet OAM Configuration and Status. SEQUENCE OF GenEquipProtocolsEoamBwVsmEntry .1.3.6.1.4.1.2281.10.8.1.6.2.1 |
genEquipProtocolsEoamBwVsmEntryA Table entry containing Ethernet OAM Configuration and Status. GenEquipProtocolsEoamBwVsmEntry .1.3.6.1.4.1.2281.10.8.1.6.2.1.1 |
genEquipProtocolsEoamBwVsmNameName of EOAM entityro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.1 |
genEquipProtocolsEoamBwVsmAdminEoam Admin. Possible valuew: Up, Downrw Dot1CfmInterfaceStatus .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.2 |
genEquipProtocolsEoamBwVsmPeriodThe interval of transmitting messages, when current nominal.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.3 |
genEquipProtocolsEoamBwVsmCurrentBwThe Current BW measure by 4 samples (with 250msec interval)ro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.4 |
genEquipProtocolsEoamBwVsmControlIfindexControl Interface of the eoam entityrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.5 |
genEquipProtocolsEoamBwVsmIdEOAM index.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.6 |
genEquipProtocolsEoamBwVsmMonitoredIfindexMonitored Interface of the eoam entityrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.7 |
genEquipProtocolsEoamBwVsmHoldoffThe holdoff time in which, if BW below nominal, a message is sentrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.8 |
genEquipProtocolsEoamBwVsmHoldoffStartTimeThe holdoff start counting timero INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.9 |
genEquipProtocolsEoamBwVsmHoldoffStateThe holdoff state of the EOAM entityro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.10 |
genEquipProtocolsEoamBwVsmLastSentMsgThe last EOAM message transmittedro OCTET STRING .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.11 |
genEquipProtocolsEoamBwVsmMelThe MEL to be set in the bw-vsm messagesrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.12 |
genEquipProtocolsEoamBwVsmMonitoringIntervalThe monitoring interval of the average BE calculationrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.13 |
genEquipProtocolsEoamBwVsmNominalBwThe nominal BW of the monitored interface, to be set in the bw-vsm messagesro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.14 |
genEquipProtocolsEoamBwVsmTxMsgCounterThe number of transmitted messagesro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.15 |
genEquipProtocolsEoamBwVsmVersionEOAM version usedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.16 |
genEquipProtocolsEoamBwVsmVlanThe VLAN to be set in the bw-vsm messagesrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.17 |
genEquipProtocolsEoamBwVsmResetMsgCounterReset Messages Counterrw OffOn .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.18 |
genEquipProtocolsEoamBwVsmRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.6.2.1.1.30 |
genEquipProtocolsG8032Erpi OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.6.3 |
genEquipProtocols8032DestMacAddressG8032 (Resiliency protocol) destination MAC addressrw OCTET STRING .1.3.6.1.4.1.2281.10.8.1.6.3.1 |
genEquipProtocolsG8032NodeIdG.8032 Node IDro OCTET STRING .1.3.6.1.4.1.2281.10.8.1.6.3.2 |
genEquipProtocolsG8032ErpiAttributesTableA table containing ERPI attributes. SEQUENCE OF GenEquipProtocolsG8032ErpiAttributesEntry .1.3.6.1.4.1.2281.10.8.1.6.3.10 |
genEquipProtocolsG8032ErpiAttributesEntryA table entry containing ERPI attributes. GenEquipProtocolsG8032ErpiAttributesEntry .1.3.6.1.4.1.2281.10.8.1.6.3.10.1 |
genEquipProtocolsG8032ErpiAttributesErpiIdERPI IDro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.1 |
genEquipProtocolsG8032ErpiAttributesErpiNameERPI Namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.2 |
genEquipProtocolsG8032ErpiAttributesGuardTimeIndicates the ERPI Guard Time; units are msec, steps are 10msec.rw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.3 |
genEquipProtocolsG8032ErpiAttributesHoldoffTimeThe ERPI holdoff Time; units are msec, steps are 100msec.
Controls the time from failure detection to responding to failurerw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.4 |
genEquipProtocolsG8032ErpiAttributesLastChangeTsDenotes the Timestamp of the last ring state machine transitionro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.5 |
genEquipProtocolsG8032ErpiAttributesLastHpRequestDescribes the last high-priority request.ro G8032LastState .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.6 |
genEquipProtocolsG8032ErpiAttributesLastLocalStateDescribes the current local state that is input to the ERPI state machinero G8032LastState .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.7 |
genEquipProtocolsG8032ErpiAttributesLastRemoteStateDescribes the last event received from the far endro G8032LastState .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.8 |
genEquipProtocolsG8032ErpiAttributesMegLevelIndicates MEG LEVEL, when interoperating with SOAMrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.9 |
genEquipProtocolsG8032ErpiAttributesDownMepIndicates if the ERPI is related to a down MEP and if to which onero INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.10 |
genEquipProtocolsG8032ErpiAttributesRevertiveIndicates whether the ERPI is revertivero IfMgrTrueFalse .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.11 |
genEquipProtocolsG8032ErpiAttributesRingStateDescribes the state in which id ERPI is assumed.
Possible states are: Initializing, Idle, Pending, Protecting, FS, MS)ro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.12 |
genEquipProtocolsG8032ErpiAttributesRplOwnerIndicates whether the ERPI is RPL owner and if such, which ERPI Port is the ownerrw Enumeration .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.13 |
genEquipProtocolsG8032ErpiAttributesSdHandlingIndicates the ERPI takes into account SD (Signal Degraded) events (BER, capacity degradation)rw IfMgrTrueFalse .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.14 |
genEquipProtocolsG8032ErpiAttributesServiceIdIndicates Service ID of the ERPIrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.15 |
genEquipProtocolsG8032ErpiAttributesErpiTypeERPI Type ( ring / sub-ring / ring with sub-ring port)rw Enumeration .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.16 |
genEquipProtocolsG8032ErpiAttributesVersionIndicates the ERPI version number used in the ERPI protocolrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.17 |
genEquipProtocolsG8032ErpiAttributesVirtualChannelVLAN of virtual channel; 0 denotes no virtual channelrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.18 |
genEquipProtocolsG8032ErpiAttributesWtrIndicates the ERPI WTR; units are minutesrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.19 |
genEquipProtocolsG8032ErpiAttributesRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.30 |
genEquipProtocolsG8032ErpiPortAttributesTableA table containing ERP port attributes. SEQUENCE OF GenEquipProtocolsG8032ErpiPortAttributesEntry .1.3.6.1.4.1.2281.10.8.1.6.3.11 |
genEquipProtocolsG8032ErpiPortAttributesEntryA table entry containing ERP port attributes. GenEquipProtocolsG8032ErpiPortAttributesEntry .1.3.6.1.4.1.2281.10.8.1.6.3.11.1 |
genEquipProtocolsG8032ErpiPortAttributesErpiIdDenotes the ERPI IDro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.1 |
genEquipProtocolsG8032ErpiPortAttributesErpiIfindexg8032_erp_port_sp_indexro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.2 |
genEquipProtocolsG8032ErpiPortAttributesActiveStateDenotes if G8032 port (SP) is active for traffic forwarding or notro IfMgrTrueFalse .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.3 |
genEquipProtocolsG8032ErpiPortAttributesDataFwdStateSpecifies whether the port is forwarding or blocking dataro IfMgrTrueFalse .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.4 |
genEquipProtocolsG8032ErpiPortAttributesDefectStateDefines the ERPI Port Oper-state derived from port. It is updates when Oper-state is changed.ro Enumeration .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.5 |
genEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdStateSpecifies whether the port is forwarding or blocking raps framesro IfMgrTrueFalse .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.6 |
genEquipProtocolsG8032ErpiPortAttributesRplLinkBlockStateSpecifies whether the RPL is in blocking state. relevant only for RPL ownerro IfMgrTrueFalse .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.7 |
genEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFramesNumber of invalid R-APS PDU receivedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.8 |
genEquipProtocolsG8032ErpiPortAttributesRxRapsEventsNumber of events R-APS PDU receivedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.9 |
genEquipProtocolsG8032ErpiPortAttributesRxRapsFramesNumber of R-APS PDU receivedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.10 |
genEquipProtocolsG8032ErpiPortAttributesFsNumber of FS PDU receivedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.11 |
genEquipProtocolsG8032ErpiPortAttributesMsNumber of MS PDU receivedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.12 |
genEquipProtocolsG8032ErpiPortAttributesNrNumber of NR R-APS PDU receivedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.13 |
genEquipProtocolsG8032ErpiPortAttributesRbNumber of RB R-APS PDU receivedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.14 |
genEquipProtocolsG8032ErpiPortAttributesSdNumber of SD R-APS PDU receivedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.15 |
genEquipProtocolsG8032ErpiPortAttributesSfNumber of SF R-APS PDU receivedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.17 |
genEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThresholdThe capacity degradation threshold, in percentage,
from which SD is indicated from this ERPI Portro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.18 |
genEquipProtocolsG8032ErpiPortAttributesSpIdService Point IDrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.19 |
genEquipProtocolsG8032ErpiPortAttributesTxRapsCntrolWhen value is False, R-APS are not transmitted by ERPI Portro IfMgrTrueFalse .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.20 |
genEquipProtocolsG8032ErpiPortAttributesTxRapsEventsNumber of events R-APS PDU transmittedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.21 |
genEquipProtocolsG8032ErpiPortAttributesTxRapsFramesNumber of Total R-APS PDU transmittedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.22 |
genEquipProtocolsG8032ErpiPortAttributesTxRapsFsNumber of FS R-APS PDU transmittedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.23 |
genEquipProtocolsG8032ErpiPortAttributesTxRapsMsNumber of MS R-APS PDU transmittedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.24 |
genEquipProtocolsG8032ErpiPortAttributesTxRapsNrNumber of NR R-APS PDU transmittedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.25 |
genEquipProtocolsG8032ErpiPortAttributesTxRapsRbNumber of RB R-APS PDU transmittedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.26 |
genEquipProtocolsG8032ErpiPortAttributesTxRapsSdNumber of SD R-APS PDU transmittedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.27 |
genEquipProtocolsG8032ErpiPortAttributesTxRapsSfNumber of SF R-APS PDU transmittedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.28 |
genEquipProtocolsG8032ErpiPortAttributesClearCommandClear Commandrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.29 |
genEquipProtocolsG8032ErpiPortAttributesRowStatusTable Mib Row Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.30 |
genEquipProtocolsG8032ErpiPortAttributesFsCommandForce Switch (FS)rw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.31 |
genEquipProtocolsG8032ErpiPortAttributesMsCommandManual Switch (MS)rw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.3.11.1.32 |
genEquipProtocolsSoam OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.1.6.4 |
genEquipProtocolsSoamMepTableA table containg MEP attributes. SEQUENCE OF GenEquipProtocolsSoamMepEntry .1.3.6.1.4.1.2281.10.8.1.6.4.10 |
genEquipProtocolsSoamMepEntryA table entry containg MEP attributes. GenEquipProtocolsSoamMepEntry .1.3.6.1.4.1.2281.10.8.1.6.4.10.1 |
genEquipProtocolsSoamMepMdIndexMD Indexro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.10.1.1 |
genEquipProtocolsSoamMepMaIndexMA/MEG Indexro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.10.1.2 |
genEquipProtocolsSoamMepMepIndentifierMEP IDro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.10.1.3 |
genEquipProtocolsSoamMepSpIdService Point IDrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.10.1.4 |
genEquipProtocolsSoamMepLastSessionLbmOutNumber of LBM frames transmitted during the current/last sessionro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.10.1.5 |
genEquipProtocolsSoamMepLastSessionlbmToSendNumber of LBM frames left to send in the sessionro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.10.1.6 |
genEquipProtocolsSoamMepLastSessionLbrInNumber of LBR messages received during the current/last sessionro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.10.1.7 |
genEquipProtocolsSoamMepLastSessionlbStateSpecifies the loopback session Statero LBState .1.3.6.1.4.1.2281.10.8.1.6.4.10.1.8 |
genEquipProtocolsSoamMepLbmOutSpecifies the mumber of the LBM frames transmittedro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.10.1.9 |
genEquipProtocolsSoamMegTableA table containing SOAM MA/MEG network identical attributes common to 802.1ag. SEQUENCE OF GenEquipProtocolsSoamMegEntry .1.3.6.1.4.1.2281.10.8.1.6.4.11 |
genEquipProtocolsSoamMegEntryA table entry containing SOAM MA/MEG network identical attributes common to 802.1ag. GenEquipProtocolsSoamMegEntry .1.3.6.1.4.1.2281.10.8.1.6.4.11.1 |
genEquipProtocolsSoamMegMdIndexMD Indexro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.11.1.1 |
genEquipProtocolsSoamMegMaIndexMA/MEG Indexro INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.11.1.2 |
genEquipProtocolsSoamMegServiceIdService IDrw INTEGER .1.3.6.1.4.1.2281.10.8.1.6.4.11.1.3 |
genEquipTdmTrails OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.2 |
genEquipTdmTrailsTableTDM Trails configuration and status table. SEQUENCE OF GenEquipTdmTrailsEntry .1.3.6.1.4.1.2281.10.8.2.1 |
genEquipTdmTrailsEntryTDM Trails PM table. GenEquipTdmTrailsEntry .1.3.6.1.4.1.2281.10.8.2.1.1 |
genEquipTdmTrailIDThe Trail ID. This parameter is the index of the table.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.2.1.1.1 |
genEquipTdmTrailDescrTrail description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.2.1.1.2 |
genEquipTdmTrailProtectedThis parameter indicates whether the trail is protected or not.rw Enumeration .1.3.6.1.4.1.2281.10.8.2.1.1.3 |
genEquipTdmTrailAcmPrioThe ACM priority of the trail. In case of High priority TDM trail, ACM is enabled on the link and there is a reduction
of the link capacity, this trail will be prioritized before the low priority trails to be dropped.rw Enumeration .1.3.6.1.4.1.2281.10.8.2.1.1.4 |
genEquipTdmTrailOperStatusThe status of the TDM trail. in operational case, the trail is active/enabled and send alarms.rw Enumeration .1.3.6.1.4.1.2281.10.8.2.1.1.5 |
genEquipTdmTrailAlarmStatusThe alarm status of the trail active path.
The value is a Bit Map: Id-Mismatch(0x01),
Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20).ro INTEGER .1.3.6.1.4.1.2281.10.8.2.1.1.6 |
genEquipTdmTrailSrcSlotTrail source slot number.rw INTEGER .1.3.6.1.4.1.2281.10.8.2.1.1.7 |
genEquipTdmTrailSrcTypeThe type of the source interface of the trail line(0), radio(1),stm-1-oc-3(2), sync(4).rw TrailIfType .1.3.6.1.4.1.2281.10.8.2.1.1.8 |
genEquipTdmTrailSrcNumThe interface number, for example E1 number 5. in case of a line.rw INTEGER .1.3.6.1.4.1.2281.10.8.2.1.1.9 |
genEquipTdmTrailDest1SlotThe slot destination of the trail.rw INTEGER .1.3.6.1.4.1.2281.10.8.2.1.1.10 |
genEquipTdmTrailDest1TypeThe interface type destination of the trail.rw TrailIfType .1.3.6.1.4.1.2281.10.8.2.1.1.11 |
genEquipTdmTrailDest1NumThe destination interface number.rw INTEGER .1.3.6.1.4.1.2281.10.8.2.1.1.12 |
genEquipTdmTrailDest2SlotA secondary slot number that is being used when protection is enabled.rw INTEGER .1.3.6.1.4.1.2281.10.8.2.1.1.13 |
genEquipTdmTrailDest2TypeA secondary interface type that is being used when protection is enabled.rw TrailIfType .1.3.6.1.4.1.2281.10.8.2.1.1.14 |
genEquipTdmTrailDest2NumA secondary interface number that is being used when protection is enabled.rw INTEGER .1.3.6.1.4.1.2281.10.8.2.1.1.15 |
genEquipTdmTrailProtectedForceActiveForce active of the primary or the secondary trails.rw TrailProtectedType .1.3.6.1.4.1.2281.10.8.2.1.1.16 |
genEquipTdmTrailProtectedActiveTrailThe trail current active path. That tells us Who is the active trail.ro TrailProtectedType .1.3.6.1.4.1.2281.10.8.2.1.1.17 |
genEquipTdmTrailProtectedNumOfSwitchesThe value represent the number of switches in SNCP between the primary and secondary trails.
Setting this value to 0, clears this counterro INTEGER .1.3.6.1.4.1.2281.10.8.2.1.1.18 |
genEquipTdmTrailPrimaryPathAlarmStatusThe alarm status of the trail primary path.
The value is a Bit Map: Id-Mismatch(0x01),
Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20).ro INTEGER .1.3.6.1.4.1.2281.10.8.2.1.1.19 |
genEquipTdmTrailSecondaryPathAlarmStatusThe alarm status of the trail secondary path.
The value is a Bit Map: Id-Mismatch(0x01),
Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20).ro INTEGER .1.3.6.1.4.1.2281.10.8.2.1.1.20 |
genEquipTdmTrailRowStatusThe Row status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.2.1.1.30 |
genEquipTdmTrailsProtectedForceActiveAllCmdForce all active trails to be either primary or secondary.rw TrailProtectedType .1.3.6.1.4.1.2281.10.8.2.2 |
genEquipTdmTrailsProtectedForceOperationalOrReservedCmdForce all active trails to be either operational or reserved.rw Enumeration .1.3.6.1.4.1.2281.10.8.2.3 |
genEquipTdmTrailsProtectedRevertiveSwitchTimeoutThe revertive switch timeout in seconds for revertive protected trails.rw INTEGER .1.3.6.1.4.1.2281.10.8.2.4 |
genEquipTdmTrailsSwitchCounterClearThis parameter will clear the counter for protected switches.rw OffOn .1.3.6.1.4.1.2281.10.8.2.5 |
genEquipTdmTrailsDeleteAllTrailsThis parameter will delete all existing trails.rw OffOn .1.3.6.1.4.1.2281.10.8.2.6 |
genEquipSynchronization OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.3 |
genEquipSynchronizationSrcTableSynchronization source table. SEQUENCE OF GenEquipSynchronizationSrcEntry .1.3.6.1.4.1.2281.10.8.3.1 |
genEquipSynchronizationSrcEntrySynchronization source table. GenEquipSynchronizationSrcEntry .1.3.6.1.4.1.2281.10.8.3.1.1 |
genEquipSynchronizationSrcPriorityThe source for system synchronization (primary, seconday).ro INTEGER .1.3.6.1.4.1.2281.10.8.3.1.1.1 |
genEquipSynchronizationSrcSlotThe slot number of the sync source (1..6).
Possible values:
- standalone(0)
- slot1(1)
- slot2(2)
- slot3(3)
- slot4(4)
- slot5(5)
- slot6(6)rw SlotId .1.3.6.1.4.1.2281.10.8.3.1.1.2 |
genEquipSynchronizationSrcTypeThe interface type (line (PDH), Radio, STM-1/OC-3), or signal coming from the PW card.rw Enumeration .1.3.6.1.4.1.2281.10.8.3.1.1.3 |
genEquipSynchronizationSrcNumThe sync source number: VC in STM-1/OC-3, Radio channel in case the interface is Radio, or E1 number in
case the interface is PDH (E1s).rw INTEGER .1.3.6.1.4.1.2281.10.8.3.1.1.4 |
genEquipSynchronizationSrcValidThis paremter is the source status, if the source if valid or not.
In case it is valid, it means that the clock being extracted from the source is ok and can be used.
In case it is not-valid the source is not in use, each interface will have it's own clock.ro Enumeration .1.3.6.1.4.1.2281.10.8.3.1.1.5 |
genEquipSynchronizationSrcTrailThis parameter indicates whether the synchronization source is the
signal of an existing co-located TDM trail used for traffic.
Enabling this parameter in an interface which does not belong to a trail will fail,
as well as disabling it for an interface which belongs to a trail.rw EnableDisable .1.3.6.1.4.1.2281.10.8.3.1.1.6 |
genEquipSynchronizationSrcAdminAdmin state of the sync source (the sync source is enabled or disabled).rw EnableDisable .1.3.6.1.4.1.2281.10.8.3.1.1.7 |
genEquipSynchronizationSrcQualityparameter configures the quality of the incoming clock signal.rw Enumeration .1.3.6.1.4.1.2281.10.8.3.1.1.8 |
genEquipSynchronizationSrcReceivedSSMThis parameter shows the current value of the received SSM messages.ro INTEGER .1.3.6.1.4.1.2281.10.8.3.1.1.9 |
genEquipSynchronizationSrcQualityStatusThis parameter shows the current quality level of the interface.ro Enumeration .1.3.6.1.4.1.2281.10.8.3.1.1.10 |
genEquipSynchronizationRadioClkSrcSourceThis parameters determines whether the system reference frequency is transported through the radio.
0 indicates that the outgoing signal takes its clock from an independant local clock.
channel number indicates that the clock is from that radio-channel reference clock,
as taken from the synchronization source interface.rw INTEGER .1.3.6.1.4.1.2281.10.8.3.3 |
genEquipSynchronizationSDHClkSrcSourceThis parameters determines whether the system reference frequency is transported
through the interface. if value is 0 it indicates that the outgoing signal takes its
clock from an independant local clock.
system-clock-source indicates that the clock is from the system reference clock,
as taken from the synchronization source interface.rw INTEGER .1.3.6.1.4.1.2281.10.8.3.4 |
genEquipSynchronizationPDHClkSrcTableSynchronization source table. SEQUENCE OF GenEquipSynchronizationPDHClkSrcEntry .1.3.6.1.4.1.2281.10.8.3.5 |
genEquipSynchronizationPDHClkSrcEntrySynchronization source table. GenEquipSynchronizationPDHClkSrcEntry .1.3.6.1.4.1.2281.10.8.3.5.1 |
genEquipSynchronizationPDHClkSrcIFNumThis parameters the interface which is configured to take the system reference clock
or a local clock in genEquipSynchronizationSDHClkSrcSource.
The number indicates the E1/DS1 interface being configured (1-32).rw INTEGER .1.3.6.1.4.1.2281.10.8.3.5.1.2 |
genEquipSynchronizationPDHClkSrcSourceThis parameters determines whether the system reference frequency is transported
through the interface defined in genEquipSynchronizationPDHClkSrcIFNum.
local-clock indicates that the outgoing signal takes its clock from an independant local clock.
system-clock-source indicates that the clock is from the system reference clock,
as taken from the synchronization source interface.rw Enumeration .1.3.6.1.4.1.2281.10.8.3.5.1.3 |
genEquipSynchronizationPRCRegeneratorModeThis parameter sets the IDU to point-to-point PRC quality frequency distribution mode.
Notice that this is relevant only for smart pipe applicationsrw EnableDisable .1.3.6.1.4.1.2281.10.8.3.6 |
genEquipSynchronizationPRCRegeneratorDirectionThis parameter sets the direction in which the frequency signal is transported,
in the case of electrical GBE interfaces.
Notice that for optical interfaces, this parameter has no effect.rw Enumeration .1.3.6.1.4.1.2281.10.8.3.7 |
genEquipSynchronizationSrcRevertiveTimerthis parameter sets the timeout (in seconds) for a counter which is set once
an interface recovers from a failure; after this timeout the interface will be considered
stable and can be used as a synchronization source. A value of zero means no timer.rw INTEGER .1.3.6.1.4.1.2281.10.8.3.8 |
genEquipSynchronizationSrcActiveSyncSourceIndexThe active synchronization source.ro INTEGER .1.3.6.1.4.1.2281.10.8.3.9 |
genEquipSynchronizationNodeModeThis parameter allows forcing a certain source as the active source for the system reference clock.
When forced, the active source is specified by genEquipSynchronizationForceSource.
In automatic mode, the active source is determined by quality and priority of the relevant interfaces
(as configured in table genEquipSynchronizationSrcTable).rw Enumeration .1.3.6.1.4.1.2281.10.8.3.10 |
genEquipSynchronizationForceSourceThis parameter determines which source number will be forced as active when genEquipSynchronizationNodeMode is set to force.rw INTEGER .1.3.6.1.4.1.2281.10.8.3.11 |
genEquipSynchronizationSystemReferenceQualityThis parameter shows the current quality of the system reference clockro Enumeration .1.3.6.1.4.1.2281.10.8.3.12 |
genEquipSynchronizationRegeneratorSSMAdminThis parameter determines whether or not in pipe mode the system generates SSM messagesrw INTEGER .1.3.6.1.4.1.2281.10.8.3.13 |
genEquipSynchronizationPWClkExportThis parameter determines whether the system reference clock is exported toward the PWE3 T-Card;
This reference can be exported towards front panel using ExportClkFrontPannel or used as a common clock for
PWs using ClockSourceRef. Notice that either this or any single one of the PW T-card TDM interfaces can export the reference clock,
but not both at the same time.rw Enumeration .1.3.6.1.4.1.2281.10.8.3.14 |
genEquipSynchronizationPipeTableThe table shows pipe interfaces. SEQUENCE OF GenEquipSynchronizationPipeEntry .1.3.6.1.4.1.2281.10.8.3.20 |
genEquipSynchronizationPipeEntryThe table entry shows pipe interfaces. GenEquipSynchronizationPipeEntry .1.3.6.1.4.1.2281.10.8.3.20.1 |
genEquipSynchronizationPipeIdPipe ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.3.20.1.1 |
genEquipSynchronizationPipeInd1Sync Interface 1.rw INTEGER .1.3.6.1.4.1.2281.10.8.3.20.1.2 |
genEquipSynchronizationPipeInd2Sync Interface 2.rw INTEGER .1.3.6.1.4.1.2281.10.8.3.20.1.3 |
genEquipSynchronizationPipeStatusSync Pipe Status.rw INTEGER .1.3.6.1.4.1.2281.10.8.3.20.1.4 |
genEquipSynchronizationPTP OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.3.21 |
genEquipSynchronizationPTPTcAdminTransparent Clock (TC) administrative state.rw INTEGER .1.3.6.1.4.1.2281.10.8.3.21.1 |
genEquipSynchronizationPTPTcConfigTablePTP (Precision Time Protocol) TC (Transparent Clock) configuration table. SEQUENCE OF GenEquipSynchronizationPTPTcConfigEntry .1.3.6.1.4.1.2281.10.8.3.21.10 |
genEquipSynchronizationPTPTcConfigEntryPTP (Precision Time Protocol) TC (Transparent Clock) configuration table entry. GenEquipSynchronizationPTPTcConfigEntry .1.3.6.1.4.1.2281.10.8.3.21.10.1 |
genEquipSynchronizationPTPTcConfigIdThe interface on which TC function is required.rw INTEGER .1.3.6.1.4.1.2281.10.8.3.21.10.1.1 |
genEquipSynchronizationPTPTcConfigMasterPoints whether the interface's direction is upstream or downstream.rw Enumeration .1.3.6.1.4.1.2281.10.8.3.21.10.1.2 |
genEquipSynchronizationPTPTcStatusTablePTP (Precision Time Protocol) TC (Transparent Clock) status table. SEQUENCE OF GenEquipSynchronizationPTPTcStatusEntry .1.3.6.1.4.1.2281.10.8.3.21.11 |
genEquipSynchronizationPTPTcStatusEntryPTP (Precision Time Protocol) TC (Transparent Clock) status table entry. GenEquipSynchronizationPTPTcStatusEntry .1.3.6.1.4.1.2281.10.8.3.21.11.1 |
genEquipSynchronizationPTPTcStatusIdThe interface on which TC status is required.ro INTEGER .1.3.6.1.4.1.2281.10.8.3.21.11.1.1 |
genEquipSynchronizationPTPTcStatusStateThe status of the TC function that may be: Down, Init, Calibrating or Up.ro Enumeration .1.3.6.1.4.1.2281.10.8.3.21.11.1.2 |
genEquipSynchronizationPTPTcStatusFreqLockThe lock status, Up or Down, of the network synchronization frequency that passes through the interface.ro DownUp .1.3.6.1.4.1.2281.10.8.3.21.11.1.3 |
genEquipServicesPW OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.4 |
genEquipServicesPWBundlesTableThis table allows configuration of DS0 bundles.
Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescriptionTable. SEQUENCE OF GenEquipServicesPWBundlesEntry .1.3.6.1.4.1.2281.10.8.4.1 |
genEquipServicesPWBundlesEntryThis table allows configuration of DS0 bundles.
Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescriptionTable. GenEquipServicesPWBundlesEntry .1.3.6.1.4.1.2281.10.8.4.1.1 |
genEquipServicesPWBundlesBundleIdUnique DS0 bundle ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.1.1.1 |
genEquipServicesPWBundlesDs0ListDS0 slot number belonging to a bundle.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.1.1.2 |
genEquipServicesPWBundlesRowStatusThis value is the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.1.1.30 |
genEquipServicesPWBundlesDescriptionTableThis table allows configuration of DS0 bundles description.
Notice that the bundle configuration itself is not located in this table but in table genEquipServicesPWBundlesTable. SEQUENCE OF GenEquipServicesPWBundlesDescriptionEntry .1.3.6.1.4.1.2281.10.8.4.2 |
genEquipServicesPWBundlesDescriptionEntryThis table allows configuration of DS0 bundles description.
Notice that the bundle configuration itself is not located in this table but in table genEquipServicesPWBundlesTable. GenEquipServicesPWBundlesDescriptionEntry .1.3.6.1.4.1.2281.10.8.4.2.1 |
genEquipServicesPWBundlesDescriptionBundleIdUnique DS0 bundle ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.2.1.1 |
genEquipServicesPWBundlesDescriptionBundleDescDS0 bundle description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.2.1.2 |
genEquipServicesPWBundlesDescriptionBundleAdminAdmin.rw EnableDisable .1.3.6.1.4.1.2281.10.8.4.2.1.3 |
genEquipServicesPWBundlesDescriptionBundleOperStatusOperational status.ro Enumeration .1.3.6.1.4.1.2281.10.8.4.2.1.4 |
genEquipServicesPWBundlesDescriptionBundleTdmPortTDM port from which the channels are assigned to the bundle.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.2.1.5 |
genEquipServicesPWBundlesDescriptionRowStatusThis value is the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.2.1.30 |
genEquipServicesPWPSNTunnelsTableThis table allows configuration of PSN encapsulations meant for pseudowire services. SEQUENCE OF GenEquipServicesPWPSNTunnelsEntry .1.3.6.1.4.1.2281.10.8.4.3 |
genEquipServicesPWPSNTunnelsEntryThis table allows configuration of PSN encapsulations meant for pseudowire services. GenEquipServicesPWPSNTunnelsEntry .1.3.6.1.4.1.2281.10.8.4.3.1 |
genEquipServicesPWPSNTunnelsSlotNumberSlot number where the relevant PW card is inserted.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.1 |
genEquipServicesPWPSNTunnelsTunnelIdPSN tunnel ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.2 |
genEquipServicesPWPSNTunnelsPsnTypePsn type supported by this tunnel.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.3.1.3 |
genEquipServicesPWPSNTunnelsSVidPSN Tunnel S-VLAN Id.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.4 |
genEquipServicesPWPSNTunnelsCVidPSN Tunnel C-VLAN Id.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.5 |
genEquipServicesPWPSNTunnelsPBitsPSN Tunnel P-bits.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.6 |
genEquipServicesPWPSNTunnelsDestIpAddrDestination IP Address for UDP/IP PSN tunnel.rw IpAddress .1.3.6.1.4.1.2281.10.8.4.3.1.7 |
genEquipServicesPWPSNTunnelsDestIpSubnetDestination IP Subnet for UDP/IP PSN tunnel.rw IpAddress .1.3.6.1.4.1.2281.10.8.4.3.1.8 |
genEquipServicesPWPSNTunnelsNextHopIpNext hop IP Address for UDP/IP PSN tunnel.rw IpAddress .1.3.6.1.4.1.2281.10.8.4.3.1.9 |
genEquipServicesPWPSNTunnelsTosDscpPSN Tunnel ToS (DSCP).rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.10 |
genEquipServicesPWPSNTunnelsRemoteMacAddrRemote MAC Adress.rw OCTET STRING .1.3.6.1.4.1.2281.10.8.4.3.1.11 |
genEquipServicesPWPSNTunnelsSourceIpAddrSource IP Address.rw IpAddress .1.3.6.1.4.1.2281.10.8.4.3.1.12 |
genEquipServicesPWPSNTunnelsSourceMacAddrSource MAC Address.rw OCTET STRING .1.3.6.1.4.1.2281.10.8.4.3.1.13 |
genEquipServicesPWPSNTunnelsStatusPSN tunnel admin.rw DownUp .1.3.6.1.4.1.2281.10.8.4.3.1.14 |
genEquipServicesPWPSNTunnelsSourceMPLSLabelSource MPLS Label.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.15 |
genEquipServicesPWPSNTunnelsDestinationMPLSLabelDestination MPLS label.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.16 |
genEquipServicesPWPSNTunnelsMPLSexpMPLS Experimental field.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.17 |
genEquipServicesPWPSNTunnelsVlanTypeVLAN type supported by this PSN tunnel (S-VLAN or C-VLAN).rw PWTunnelVlanType .1.3.6.1.4.1.2281.10.8.4.3.1.18 |
genEquipServicesPWPSNTunnelsVidPSN Tunnel VLAN ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.19 |
genEquipServicesPWPSNTunnelsMAidMaintenance Association Id.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.3.1.20 |
genEquipServicesPWPSNTunnelsRowStatusThis value is the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.3.1.30 |
genEquipServicesPWProfilesTableThis table allows configuration of pseudowire profiles.
These profiles are used when configuring PW services in table genEquipServicesPWServiceTable. SEQUENCE OF GenEquipServicesPWProfilesEntry .1.3.6.1.4.1.2281.10.8.4.4 |
genEquipServicesPWProfilesEntryThis table allows configuration of pseudowire profiles.
These profiles are used when configuring PW services in table genEquipServicesPWServiceTable. GenEquipServicesPWProfilesEntry .1.3.6.1.4.1.2281.10.8.4.4.1 |
genEquipServicesPWProfilesPWProfileIdUnique PW profile ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.1 |
genEquipServicesPWProfilesPayloadSizePayload size in bytes.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.2 |
genEquipServicesPWProfilesJitterBufferDepthJitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variationrw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.3 |
genEquipServicesPWProfilesLopsDetectionIf enabled, LOPS detection is supported.rw EnableDisable .1.3.6.1.4.1.2281.10.8.4.4.1.4 |
genEquipServicesPWProfilesRtpHeaderUsedIf set to False: an RTP header is not pre-pended to the TDM packet.rw NoYes .1.3.6.1.4.1.2281.10.8.4.4.1.5 |
genEquipServicesPWProfilesRtpTimestampModeRTP timestamp moderw PWRtpTimeStampMode .1.3.6.1.4.1.2281.10.8.4.4.1.6 |
genEquipServicesPWProfilesRtpTimestampAbsFactorMultiplication factor for 8KHz units in absolute mode of RTP timestamping.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.7 |
genEquipServicesPWProfilesPayloadSuppressionPayload suppression.rw EnableDisable .1.3.6.1.4.1.2281.10.8.4.4.1.8 |
genEquipServicesPWProfilesPayloadTypePayload type.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.9 |
genEquipServicesPWProfilesConseqPacketsInSyncNumber of consecutive packets with sequential sequence numbers required to exit LOPS.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.10 |
genEquipServicesPWProfilesConseqMissPktsOutSyncNumber of consecutive missing packets required to enter LOPS.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.11 |
genEquipServicesPWProfilesPktLossTimeWindowTime for computing average packet loss rate to detect excessive packet loss.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.12 |
genEquipServicesPWProfilesExcessivePktLossThreshAlarm threshold (in percent) for excessive packet loss.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.13 |
genEquipServicesPWProfilesAlarmThreshDelay (in msecs) for persistent alarm setting.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.14 |
genEquipServicesPWProfilesClearAlarmThreshDelay (in msecs) for persistent alarm clearing.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.15 |
genEquipServicesPWProfilesMissingPktsToSesPercent of missing packets detected in 1 second window to cause SES to be counted.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.16 |
genEquipServicesPWProfilesDs0FillerByte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.17 |
genEquipServicesPWProfilesCasAlarmPatternCAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.4.1.18 |
genEquipServicesPWProfilesRowStatusThis value is the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.4.1.30 |
genEquipServicesPWServiceTableThis table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels,
and profiles to a service. SEQUENCE OF GenEquipServicesPWServiceEntry .1.3.6.1.4.1.2281.10.8.4.5 |
genEquipServicesPWServiceEntryThis table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels,
and profiles to a service. GenEquipServicesPWServiceEntry .1.3.6.1.4.1.2281.10.8.4.5.1 |
genEquipServicesPWServicePWIdPseudo Wire ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.5.1.1 |
genEquipServicesPWServicePWTypePW type. E1-satop denotes SAToP. Cespsn Denotes CESoP without CAS signalling,
and cas-cespsn denotes CESoP with CAS signalling.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.5.1.2 |
genEquipServicesPWServicePsnTypePSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.5.1.3 |
genEquipServicesPWServiceTdmPortNumber of TDM port (for SATOP). This parameter must be zero for CESoP.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.5.1.4 |
genEquipServicesPWServiceDs0bundleNumber DS0 bundle (for CESoPSN). This parameter must be zero for SAToP.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.5.1.5 |
genEquipServicesPWServiceTdmProfileIdTDM configuration profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.5.1.6 |
genEquipServicesPWServicePsnTunnelProtectionPSN tunnel protection mode.rw EnableDisable .1.3.6.1.4.1.2281.10.8.4.5.1.7 |
genEquipServicesPWServicePsnTunnelOrGroupIdPSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.5.1.8 |
genEquipServicesPWServiceSrcUdpPortOrEcidSource UDP Port for UDP IP tunnel or ECID for Ethernet tunnel.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.5.1.9 |
genEquipServicesPWServiceDstUdpPortOrEcidDestination UDP Port for UDP IP tunnel or ECID for Ethernet tunnel.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.5.1.10 |
genEquipServicesPWServiceAdminAdmin status.rw EnableDisable .1.3.6.1.4.1.2281.10.8.4.5.1.11 |
genEquipServicesPWServiceCrReferenceClock recovery reference.rw EnableDisable .1.3.6.1.4.1.2281.10.8.4.5.1.12 |
genEquipServicesPWServiceOperStatusOperational status.ro EnableDisable .1.3.6.1.4.1.2281.10.8.4.5.1.13 |
genEquipServicesPWServiceRowStatusThis value is the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.5.1.30 |
genEquipServicesNGPW OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.4.6 |
genEquipServicesNGPWBundlesTableThis table allows definition of the group of timeslots comprising a bundle. SEQUENCE OF GenEquipServicesNGPWBundlesEntry .1.3.6.1.4.1.2281.10.8.4.6.1 |
genEquipServicesNGPWBundlesEntryThis table entry allows definition of the group of timeslots comprising a bundle. GenEquipServicesNGPWBundlesEntry .1.3.6.1.4.1.2281.10.8.4.6.1.1 |
genEquipServicesNGPWBundlesSlotIdSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.1.1.1 |
genEquipServicesNGPWBundlesTdmPortTDM Port number.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.1.1.2 |
genEquipServicesNGPWBundlesDs0ListTimeslot number to be included in a bundle.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.1.1.3 |
genEquipServicesNGPWBundlesIfIndexiIndex.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.1.1.4 |
genEquipServicesNGPWBundlesBundleIdBundle ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.1.1.5 |
genEquipServicesNGPWBundlesRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.1.1.30 |
genEquipServicesNGPWBundlesDescriptionTableThis table allows configuring admin state and description for bundles. SEQUENCE OF GenEquipServicesNGPWBundlesDescriptionEntry .1.3.6.1.4.1.2281.10.8.4.6.2 |
genEquipServicesNGPWBundlesDescriptionEntryThis table entry allows configuring admin state and description for bundles. GenEquipServicesNGPWBundlesDescriptionEntry .1.3.6.1.4.1.2281.10.8.4.6.2.1 |
genEquipServicesNGPWBundlesDescriptionSlotIdSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.2.1.1 |
genEquipServicesNGPWBundlesDescriptionBundleIdBundle ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.2.1.2 |
genEquipServicesNGPWBundlesDescriptionAdminBundle administrative state.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.2.1.3 |
genEquipServicesNGPWBundlesDescriptionBundleDescBundle description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.2.1.4 |
genEquipServicesNGPWBundlesDescriptionRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.2.1.30 |
genEquipServicesNGPWProfilesTableThis table allows configuration of PW service profiles. SEQUENCE OF GenEquipServicesNGPWProfilesEntry .1.3.6.1.4.1.2281.10.8.4.6.3 |
genEquipServicesNGPWProfilesEntryThis table entry allows configuration of PW service profiles. GenEquipServicesNGPWProfilesEntry .1.3.6.1.4.1.2281.10.8.4.6.3.1 |
genEquipServicesNGPWProfilesPWProfileIdUnique PW profile ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.1 |
genEquipServicesNGPWProfilesPayloadSizePayload size, in terms of TDM frames in each packet.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.2 |
genEquipServicesNGPWProfilesJitterBufferDepthJitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.3 |
genEquipServicesNGPWProfilesPayloadSuppressionWhen enabled, payload is suppresed upon incoming TDM failure.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.3.1.4 |
genEquipServicesNGPWProfilesPayloadTypePayload type byte.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.5 |
genEquipServicesNGPWProfilesDs0FillerByte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.6 |
genEquipServicesNGPWProfilesCasAlarmPatternCAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.7 |
genEquipServicesNGPWProfilesRtpHeaderUsedIf set to False: an RTP header is not pre-pended to the TDM packet.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.3.1.8 |
genEquipServicesNGPWProfilesRtpTimestampModeRTP timestamp mode.rw PWRtpTimeStampMode .1.3.6.1.4.1.2281.10.8.4.6.3.1.9 |
genEquipServicesNGPWProfilesRtpTimestampAbsFactorMultiplication factor for 8KHz units in absolute mode of RTP timestamping.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.10 |
genEquipServicesNGPWProfilesLopsDetectionTimeout for TDM ports loopback.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.3.1.11 |
genEquipServicesNGPWProfilesConseqPacketsInSyncNumber of consecutive packets with sequential sequence numbers required to exit LOPS.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.12 |
genEquipServicesNGPWProfilesConseqMissPktsOutSyncNumber of consecutive missing packets required to enter LOPS.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.13 |
genEquipServicesNGPWProfilesPktLossTimeWindowTime for computing average packet loss rate to detect excessive packet loss.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.14 |
genEquipServicesNGPWProfilesExcessivePktLossThreshAlarm threshold (in percent) for excessive packet loss.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.15 |
genEquipServicesNGPWProfilesAlarmThreshDelay (in msecs) for persistent alarm setting.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.16 |
genEquipServicesNGPWProfilesClearAlarmThreshDelay (in msecs) for persistent alarm clearing.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.17 |
genEquipServicesNGPWProfilesMissingPktsToSesTPercent of missing packets detected in 1 second window to cause SES to be counted.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.3.1.18 |
genEquipServicesNGPWProfilesRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.3.1.30 |
genEquipServicesNGPWPSNTunnelsTableThis table allows configuration of PSN tunnel encapsulations for PW services. SEQUENCE OF GenEquipServicesNGPWPSNTunnelsEntry .1.3.6.1.4.1.2281.10.8.4.6.4 |
genEquipServicesNGPWPSNTunnelsEntryThis table entry allows configuration of PSN tunnel encapsulations for PW services. GenEquipServicesNGPWPSNTunnelsEntry .1.3.6.1.4.1.2281.10.8.4.6.4.1 |
genEquipServicesNGPWPSNTunnelsSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.4.1.1 |
genEquipServicesNGPWPSNTunnelsTunnelIdPSN Tunnel ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.4.1.2 |
genEquipServicesNGPWPSNTunnelsAdminPayload type byte.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.4.1.3 |
genEquipServicesNGPWPSNTunnelsPsnTypePSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation.rw PWTunnelPsnType .1.3.6.1.4.1.2281.10.8.4.6.4.1.4 |
genEquipServicesNGPWPSNTunnelsDestIpAddrDestination IP.rw IpAddress .1.3.6.1.4.1.2281.10.8.4.6.4.1.5 |
genEquipServicesNGPWPSNTunnelsNextHopIpNext hop IP Address for UDP/IP PSN tunnel.rw IpAddress .1.3.6.1.4.1.2281.10.8.4.6.4.1.6 |
genEquipServicesNGPWPSNTunnelsTosDscpPSN Tunnel ToS (DSCP).rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.4.1.7 |
genEquipServicesNGPWPSNTunnelsRemoteMacAddrRemote MAC address.rw OCTET STRING .1.3.6.1.4.1.2281.10.8.4.6.4.1.8 |
genEquipServicesNGPWPSNTunnelsSourceMPLSLabelSource MPLS Label.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.4.1.9 |
genEquipServicesNGPWPSNTunnelsDestinationMPLSLabelDestination MPLS label.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.4.1.10 |
genEquipServicesNGPWPSNTunnelsMPLSexpMPLS Experimental field.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.4.1.11 |
genEquipServicesNGPWPSNTunnelsVlanTypeVLAN type supported by this PSN tunnel (S-VLAN or C-VLAN).rw PWTunnelVlanType .1.3.6.1.4.1.2281.10.8.4.6.4.1.12 |
genEquipServicesNGPWPSNTunnelsVidPSN Tunnel VLAN ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.4.1.13 |
genEquipServicesNGPWPSNTunnelsPBitsPSN Tunnel P-bits.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.4.1.14 |
genEquipServicesNGPWPSNTunnelsMaIdMaintenance Association ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.4.1.15 |
genEquipServicesNGPWPSNTunnelsTDMDefectPropagationTDM defect propagation to SOAM. Enable for dual homing configuration.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.4.1.16 |
genEquipServicesNGPWPSNTunnelsRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.4.1.30 |
genEquipServicesNGPWServiceTableThis table allows definition of PW services. SEQUENCE OF GenEquipServicesNGPWServiceEntry .1.3.6.1.4.1.2281.10.8.4.6.5 |
genEquipServicesNGPWServiceEntryThis table entry allows definition of PW services. GenEquipServicesNGPWServiceEntry .1.3.6.1.4.1.2281.10.8.4.6.5.1 |
genEquipServicesNGPWServiceSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.5.1.1 |
genEquipServicesNGPWServicePWIdPseudowire ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.5.1.2 |
genEquipServicesNGPWServiceAdminAdministrative status of this PW service.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.5.1.3 |
genEquipServicesNGPWServicePWTypeIndicates the emulated service to be carried over the PW service (SAToP, CESoP, CESoP with PSN).rw Enumeration .1.3.6.1.4.1.2281.10.8.4.6.5.1.4 |
genEquipServicesNGPWServicePsnTypeIndicates the PSN type that the PW service will use over the network.rw PWTunnelPsnType .1.3.6.1.4.1.2281.10.8.4.6.5.1.5 |
genEquipServicesNGPWServiceDs0bundleNumber DS0 bundle (for CESoPSN). This parameter must be zero for SAToP.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.5.1.6 |
genEquipServicesNGPWServiceTdmProfileIdIndicates the PW profile id for this PW service.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.5.1.7 |
genEquipServicesNGPWServiceTunnelPSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.5.1.8 |
genEquipServicesNGPWServiceCrReferenceWhether this PW may be used as a reference for clock recovery.rw NoYes .1.3.6.1.4.1.2281.10.8.4.6.5.1.9 |
genEquipServicesNGPWServiceSrcPsnIdSource UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.5.1.10 |
genEquipServicesNGPWServiceDstPsnIdDestination UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.5.1.11 |
genEquipServicesNGPWServicePsnTunnelProtectionIndicates whether this PW service is PSN protected.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.6.5.1.12 |
genEquipServicesNGPWServiceRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.5.1.30 |
genEquipServicesNGPWTDMPortsTableThis table allows configuration of TDM ports. SEQUENCE OF GenEquipServicesNGPWTDMPortsEntry .1.3.6.1.4.1.2281.10.8.4.6.6 |
genEquipServicesNGPWTDMPortsEntryThis table entry allows configuration of TDM ports. GenEquipServicesNGPWTDMPortsEntry .1.3.6.1.4.1.2281.10.8.4.6.6.1 |
genEquipServicesNGPWTDMPortsSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.6.1.1 |
genEquipServicesNGPWTDMPortsPortPhysical port number in the card.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.6.1.2 |
genEquipServicesNGPWTDMPortsIfIndexifIndex.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.6.1.3 |
genEquipServicesNGPWTDMPortsAdminTDM port administrative state.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.6.1.4 |
genEquipServicesNGPWTDMPortsLineTypeLine type of this TDM port.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.6.6.1.5 |
genEquipServicesNGPWTDMPortsLineCodingLine coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1. AMI is only for T1.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.6.6.1.6 |
genEquipServicesNGPWTDMPortsChannelizationIndication whether this TDM port is channelized into DS0s.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.6.1.7 |
genEquipServicesNGPWTDMPortsTimingModeClock reference for the outgoing TDM signal.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.6.6.1.8 |
genEquipServicesNGPWTDMPortsClockSourceRefClock source reference for Absolute clock mode. ???none??? - for loop or clock-recovery timing modes.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.6.6.1.9 |
genEquipServicesNGPWTDMPortsClkSrcRefPortTDM port serving as a clock reference for loop or clock-recovery timing modes.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.6.1.10 |
genEquipServicesNGPWTDMPortsIdleCodeValue to be transmitted on this TDM port in unused timeslots.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.6.1.11 |
genEquipServicesNGPWTDMPortsCableLengthCable length for this port. The value fixed-or-0-133ft means fixed for E1 (the only valid value) and 0-133ft for T1.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.6.6.1.12 |
genEquipServicesNGPWTDMPortsLoopbackType of required loopback on this TDM port.rw TDMLoopbackType .1.3.6.1.4.1.2281.10.8.4.6.6.1.13 |
genEquipServicesNGPWPSNTunnelsStatusTableThis table contains status and information about existing PSN tunnels. SEQUENCE OF GenEquipServicesNGPWPSNTunnelsStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.7 |
genEquipServicesNGPWPSNTunnelsStatusEntryThis table entry contains status and information about existing PSN tunnels. GenEquipServicesNGPWPSNTunnelsStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.7.1 |
genEquipServicesNGPWPSNTunnelsStatusSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.7.1.1 |
genEquipServicesNGPWPSNTunnelsStatusTunnelIdPSN Tunnel ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.7.1.2 |
genEquipServicesNGPWPSNTunnelsStatusOperStatusPSN tunnel operational state.ro DownUp .1.3.6.1.4.1.2281.10.8.4.6.7.1.3 |
genEquipServicesNGPWPSNTunnelsStatusSourceIpAddrPSN tunnel source IP address.ro IpAddress .1.3.6.1.4.1.2281.10.8.4.6.7.1.4 |
genEquipServicesNGPWPSNTunnelsStatusSourceMacAddrPSN tunnel source MAC address.ro OCTET STRING .1.3.6.1.4.1.2281.10.8.4.6.7.1.5 |
genEquipServicesNGPWPSNTunnelsStatusRemoteMacAddrPSN tunnel remote MAC address.ro OCTET STRING .1.3.6.1.4.1.2281.10.8.4.6.7.1.6 |
genEquipServicesNGPWServiceStatusTableThis table contains status information of existing PW services. SEQUENCE OF GenEquipServicesNGPWServiceStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.8 |
genEquipServicesNGPWServiceStatusEntryThis table entry contains status information of existing PW services. GenEquipServicesNGPWServiceStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.8.1 |
genEquipServicesNGPWServiceStatusSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.8.1.1 |
genEquipServicesNGPWServiceStatusIDPseudowire ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.8.1.2 |
genEquipServicesNGPWServiceStatusOperStatusIndicates the operational status of PW service.ro DownUp .1.3.6.1.4.1.2281.10.8.4.6.8.1.3 |
genEquipServicesNGPWServiceStatusClearStatsClear all statistics for this PW service.rw NoYes .1.3.6.1.4.1.2281.10.8.4.6.8.1.4 |
genEquipServicesNGPWServiceStatusTxPktsNumber of transmitted packets.ro Counter64 .1.3.6.1.4.1.2281.10.8.4.6.8.1.5 |
genEquipServicesNGPWServiceStatusReceivedPktsNumber of received packets.ro Counter64 .1.3.6.1.4.1.2281.10.8.4.6.8.1.6 |
genEquipServicesNGPWServiceStatusTransitionsLOPSNumber of transitions from the normal state to the LOPS.ro Counter64 .1.3.6.1.4.1.2281.10.8.4.6.8.1.7 |
genEquipServicesNGPWServiceStatusJitterBufferOverrunsNumber of jitter buffer overruns.ro Counter64 .1.3.6.1.4.1.2281.10.8.4.6.8.1.8 |
genEquipServicesNGPWServiceStatusBufferDeviationsMax Jitter Buffer Deviation.ro Counter64 .1.3.6.1.4.1.2281.10.8.4.6.8.1.9 |
genEquipServicesNGPWServiceStatusMinJitterCountMinimum jitter buffer usage registered for the last second.ro Counter64 .1.3.6.1.4.1.2281.10.8.4.6.8.1.10 |
genEquipServicesNGPWServiceStatusMaxJitterCountMaximum jitter buffer usage registered for the last second.ro Counter64 .1.3.6.1.4.1.2281.10.8.4.6.8.1.11 |
genEquipServicesNGPWTDMPortsStatusTableThis table contains status information about TDM ports. SEQUENCE OF GenEquipServicesNGPWTDMPortsStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.9 |
genEquipServicesNGPWTDMPortsStatusEntryThis table entry contains status information about TDM ports. GenEquipServicesNGPWTDMPortsStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.9.1 |
genEquipServicesNGPWTDMPortsStatusSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.9.1.1 |
genEquipServicesNGPWTDMPortsStatusPortPhysical port number in the card.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.9.1.2 |
genEquipServicesNGPWTDMPortsStatusIfIndexifIndex.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.9.1.3 |
genEquipServicesNGPWTDMPortsStatusOperStatusOperational state of the port.rw DownUp .1.3.6.1.4.1.2281.10.8.4.6.9.1.4 |
genEquipServicesNGPWTDMPortsStatusLoopbackCounterLoopback time left (in seconds)ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.9.1.5 |
genEquipServicesNGPWTDMPortsStatusActualLoopbackActual status of loopback on this TDM port reported by the card.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.9.1.6 |
genEquipServicesNGPWTDMPortsStatusLineStatusCurrently present line-level PDH alarms.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.9.1.7 |
genEquipServicesNGPWTDMPortsStatusLoopbackType of required loopback on this TDM port.rw TDMLoopbackType .1.3.6.1.4.1.2281.10.8.4.6.9.1.8 |
genEquipServicesNGPWBundlesStatusTableThis table contains the current staus for bundles. SEQUENCE OF GenEquipServicesNGPWBundlesStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.10 |
genEquipServicesNGPWBundlesStatusEntryThis table contains the current staus for bundles. GenEquipServicesNGPWBundlesStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.10.1 |
genEquipServicesNGPWBundlesStatusSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.10.1.1 |
genEquipServicesNGPWBundlesStatusBundleIdBundle ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.10.1.2 |
genEquipServicesNGPWBundlesStatusOperStatusBundle operational state.ro DownUp .1.3.6.1.4.1.2281.10.8.4.6.10.1.3 |
genEquipServicesNGPWPSNTunnelGroupTableThis table allows configuration of groups of tunnels for PW path protection. SEQUENCE OF GenEquipServicesNGPWPSNTunnelGroupEntry .1.3.6.1.4.1.2281.10.8.4.6.11 |
genEquipServicesNGPWPSNTunnelGroupEntryThis table entry allows configuration of groups of tunnels for PW path protection. GenEquipServicesNGPWPSNTunnelGroupEntry .1.3.6.1.4.1.2281.10.8.4.6.11.1 |
genEquipServicesNGPWPSNTunnelGroupSlotSlot where PW-LIC is inserted.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.11.1.1 |
genEquipServicesNGPWPSNTunnelGroupIdIndicates the corresponding PSN Tunnel Protection Group.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.11.1.2 |
genEquipServicesNGPWPSNTunnelGroupPrimaryIdTunnel ID for the primary path.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.11.1.3 |
genEquipServicesNGPWPSNTunnelGroupSecondaryIdTunnel ID for the secondary path.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.11.1.4 |
genEquipServicesNGPWPSNTunnelGroupAdminAdmin.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.11.1.5 |
genEquipServicesNGPWPSNTunnelGroupRevertiveEnable for revertive protection. Default is disabled.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.11.1.6 |
genEquipServicesNGPWPSNTunnelGroupProtectionModeProtection mode 1+1.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.11.1.7 |
genEquipServicesNGPWPSNTunnelGroupRowStatusThis value is the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.11.1.30 |
genEquipServicesNGPWPSNTunnelGroupStatusTableThis table contains status of path protection tunnels. SEQUENCE OF GenEquipServicesNGPWPSNTunnelGroupStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.12 |
genEquipServicesNGPWPSNTunnelGroupStatusEntryThis table entry contains status of path protection tunnels. GenEquipServicesNGPWPSNTunnelGroupStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.12.1 |
genEquipServicesNGPWPSNTunnelGroupStatusSlotSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.12.1.1 |
genEquipServicesNGPWPSNTunnelGroupStatusIdTunnel group ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.12.1.2 |
genEquipServicesNGPWPSNTunnelGroupStatusOperStatusTunnel group operational state.ro DownUp .1.3.6.1.4.1.2281.10.8.4.6.12.1.3 |
genEquipServicesNGPWPSNTunnelGroupStatusProtectionCommandUser command to perform a path protection switch.rw TunnelGroupProtectionCmd .1.3.6.1.4.1.2281.10.8.4.6.12.1.4 |
genEquipServicesNGPWPSNTunnelGroupStatusProtectionSwitchesA counter of PSN tunnel protection switches.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.12.1.5 |
genEquipServicesNGPWPSNTunnelGroupStatusActiveTunnelCurrent active PSN tunnel.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.12.1.6 |
genEquipServicesNGPWPSNTunnelGroupStatusClearStatsUser command to clear number of switches counter.rw OffOn .1.3.6.1.4.1.2281.10.8.4.6.12.1.7 |
genEquipServicesNGPWPSNTunnelGroupStatusRevertiveCountdownTime left until revertive switch is performed.ro OffOn .1.3.6.1.4.1.2281.10.8.4.6.12.1.8 |
genEquipServicesNGPWSOAMMDTableThis table allows configuration of MD parameters at the PW card. SEQUENCE OF GenEquipServicesNGPWSOAMMDEntry .1.3.6.1.4.1.2281.10.8.4.6.13 |
genEquipServicesNGPWSOAMMDEntryThis table entry allows configuration of MD parameters at the PW card. GenEquipServicesNGPWSOAMMDEntry .1.3.6.1.4.1.2281.10.8.4.6.13.1 |
genEquipServicesNGPWSOAMMDSlotSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.13.1.1 |
genEquipServicesNGPWSOAMMDIdMaintenance Domain ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.13.1.2 |
genEquipServicesNGPWSOAMMDNameMaintenance Domain Name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.13.1.3 |
genEquipServicesNGPWSOAMMDLevelMaintenance Domain level.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.13.1.4 |
genEquipServicesNGPWSOAMMDRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.13.1.30 |
genEquipServicesNGPWSOAMMATableThis table allows configuration of MA parameters at the PW card. SEQUENCE OF GenEquipServicesNGPWSOAMMAEntry .1.3.6.1.4.1.2281.10.8.4.6.14 |
genEquipServicesNGPWSOAMMAEntryThis table entry allows configuration of MA parameters at the PW card. GenEquipServicesNGPWSOAMMAEntry .1.3.6.1.4.1.2281.10.8.4.6.14.1 |
genEquipServicesNGPWSOAMMASlotSlot ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.14.1.1 |
genEquipServicesNGPWSOAMMAIdMaintenance association ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.14.1.2 |
genEquipServicesNGPWSOAMMANameMaintenance Association name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.14.1.3 |
genEquipServicesNGPWSOAMMAMdIdMaintenance Domain ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.14.1.4 |
genEquipServicesNGPWSOAMMALocalMepIdLocal MEP ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.14.1.5 |
genEquipServicesNGPWSOAMMARemoteMepIdRemote MEP ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.14.1.6 |
genEquipServicesNGPWSOAMMAVidVLAN ID of the Maintenance Association.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.14.1.7 |
genEquipServicesNGPWSOAMMAVlanTypeVLAN type of the Maintenance Association.rw PWTunnelVlanType .1.3.6.1.4.1.2281.10.8.4.6.14.1.8 |
genEquipServicesNGPWSOAMMACCMAdminMaintenance Association CCM administrative status.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.8.4.6.14.1.9 |
genEquipServicesNGPWSOAMMACCMIntervalMaintenance Association CCM Interval.rw PWSOAMccmInterval .1.3.6.1.4.1.2281.10.8.4.6.14.1.10 |
genEquipServicesNGPWSOAMMACCMLTMPriorityMaintenance Association link trace message priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.14.1.11 |
genEquipServicesNGPWSOAMMARowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.14.1.30 |
genEquipServicesNGPWSOAMMAStatusTableThis table shows the SOAM status of each MA at the PW card level. SEQUENCE OF GenEquipServicesNGPWSOAMMAStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.15 |
genEquipServicesNGPWSOAMMAStatusEntryThis table entry shows the SOAM status of each MA at the PW card level. GenEquipServicesNGPWSOAMMAStatusEntry .1.3.6.1.4.1.2281.10.8.4.6.15.1 |
genEquipServicesNGPWSOAMMAStatusSlotSlot ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.15.1.1 |
genEquipServicesNGPWSOAMMAStatusIdMaintenance association ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.15.1.2 |
genEquipServicesNGPWSOAMMAStatusRemoteMepMACAddrRemote MEP MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.6.15.1.3 |
genEquipServicesNGPWSOAMMAStatusDefectsBitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8), Cross-connection CCM (16), AIS (32).ro INTEGER .1.3.6.1.4.1.2281.10.8.4.6.15.1.4 |
genEquipServicesNGPWTDM OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.4.6.20 |
genEquipServicesNGPWTDMRevertiveTimerThe WTR (Wait To Restore) timer for revertive switches.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.20.1 |
genEquipServicesNGPWRangeVCTDM services VC range.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.20.2 |
genEquipServicesNGPWOffsetVCTDM services VC offset.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.6.20.3 |
genEquipServicesNGPWLatencyOptimizationAdminEnables/Disables the option of choosing a latency-optimized mode for TDM services.rw EnableDisable .1.3.6.1.4.1.2281.10.8.4.6.20.4 |
genEquipServicesPWPSNTunnelGroupsTableThis table allows configuration of PSN protection groups for pseudowire service path protection. SEQUENCE OF GenEquipServicesPWPSNTunnelGroupsEntry .1.3.6.1.4.1.2281.10.8.4.10 |
genEquipServicesPWPSNTunnelGroupsEntryThis entry table allows configuration of PSN protection groups for pseudowire service path protection. GenEquipServicesPWPSNTunnelGroupsEntry .1.3.6.1.4.1.2281.10.8.4.10.1 |
genEquipServicesPWPSNTunnelGroupsTunnelGroupIDPSN Tunnel Group ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.10.1.1 |
genEquipServicesPWPSNTunnelGroupsTunnelIDPrimaryPrimary PSN tunnel ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.10.1.2 |
genEquipServicesPWPSNTunnelGroupsTunnelIDSecondarySecondary PSN tunnel ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.10.1.3 |
genEquipServicesPWPSNTunnelGroupsSwitchToStandbyForce a switch from primary to secondary tunnel.rw OffOn .1.3.6.1.4.1.2281.10.8.4.10.1.4 |
genEquipServicesPWPSNTunnelGroupsRowStatusThis value is the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.10.1.30 |
genEquipServicesPWPSNTunnelGroupStatusTableThis table allows monitoring of PSN protection groups status. SEQUENCE OF GenEquipServicesPWPSNTunnelGroupStatusEntry .1.3.6.1.4.1.2281.10.8.4.11 |
genEquipServicesPWPSNTunnelGroupStatusEntryThis table entry allows monitoring of PSN protection groups status. GenEquipServicesPWPSNTunnelGroupStatusEntry .1.3.6.1.4.1.2281.10.8.4.11.1 |
genEquipServicesPWPSNTunnelGroupStatusTunnelGroupIDPSN Tunnel Group ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.11.1.1 |
genEquipServicesPWPSNTunnelGroupStatusCurrActiveTunnelCurrently active PSN tunnel.ro Enumeration .1.3.6.1.4.1.2281.10.8.4.11.1.2 |
genEquipServicesPWPSNTunnelGroupStatusNumProtSwitchesCounter of PSN tunnel protection switches.ro INTEGER .1.3.6.1.4.1.2281.10.8.4.11.1.3 |
genEquipServicesPWSOAMMDTableThis table allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection. SEQUENCE OF GenEquipServicesPWSOAMMDEntry .1.3.6.1.4.1.2281.10.8.4.12 |
genEquipServicesPWSOAMMDEntryThis table entry allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection. GenEquipServicesPWSOAMMDEntry .1.3.6.1.4.1.2281.10.8.4.12.1 |
genEquipServicesPWSOAMMDDomainIDDomain ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.12.1.1 |
genEquipServicesPWSOAMMDDomainNameDomain Name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.12.1.2 |
genEquipServicesPWSOAMMDDomainLevelDomain Level.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.12.1.3 |
genEquipServicesPWSOAMMDRowStatusThis value is the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.12.1.30 |
genEquipServicesPWSOAMMATableThis table allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection. SEQUENCE OF GenEquipServicesPWSOAMMAEntry .1.3.6.1.4.1.2281.10.8.4.13 |
genEquipServicesPWSOAMMAEntryThis table entry allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection. GenEquipServicesPWSOAMMAEntry .1.3.6.1.4.1.2281.10.8.4.13.1 |
genEquipServicesPWSOAMMALocalIDMaintenance Association local ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.13.1.1 |
genEquipServicesPWSOAMMALocalNameMaintenance Association local Name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.13.1.2 |
genEquipServicesPWSOAMMADomainIDMaintenance Association domain ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.13.1.3 |
genEquipServicesPWSOAMMAAdminMaintenance Association Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.8.4.13.1.4 |
genEquipServicesPWSOAMMALocalMEPMaintenance Association local MEP ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.13.1.5 |
genEquipServicesPWSOAMMARemoteMEPMaintenance Association remote MEP ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.13.1.6 |
genEquipServicesPWSOAMMAVlanTypeVLAN type of the Maintenance Association.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.13.1.7 |
genEquipServicesPWSOAMMAVlanIDVLAN Id of the Maintenance Association.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.13.1.8 |
genEquipServicesPWSOAMMACCMIntervalCCM Interval.rw Enumeration .1.3.6.1.4.1.2281.10.8.4.13.1.9 |
genEquipServicesPWSOAMMACCMAdminMaintenance Association CCM admin.rw EnableDisable .1.3.6.1.4.1.2281.10.8.4.13.1.10 |
genEquipServicesPWSOAMMACCMPriorityCCM Priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.4.13.1.11 |
genEquipServicesPWSOAMMARemoteMEPAddrMAC Address of the Maintenance Association Remote MEP.rw OCTET STRING .1.3.6.1.4.1.2281.10.8.4.13.1.12 |
genEquipServicesPWSOAMMADefectsBitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8),
Cross-connection CCM (16), AIS (32).rw INTEGER .1.3.6.1.4.1.2281.10.8.4.13.1.13 |
genEquipServicesPWSOAMMARowStatusThis value is the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.4.13.1.30 |
genEquipServicesCet OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.5 |
genEquipServicesCetGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.5.1 |
genEquipServicesCetSvlanEtherTypeS VLAN Ether type.rw Enumeration .1.3.6.1.4.1.2281.10.8.5.1.1 |
genEquipServicesCetAgingTimeoutMAC forwarding entry aging timeout in seconds.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.1.2 |
genEquipServicesCetConfigTableEthernet Services configuration table -
the table describes the connectivity between the interface of the switch. SEQUENCE OF GenEquipServicesCetConfigEntry .1.3.6.1.4.1.2281.10.8.5.2 |
genEquipServicesCetConfigEntryEthernet Services configuration table entry -
the table describes the connectivity between the interface of the switch. GenEquipServicesCetConfigEntry .1.3.6.1.4.1.2281.10.8.5.2.1 |
genEquipServicesCetConfigIndexService ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.2.1.1 |
genEquipServicesCetConfigTypeEthernet Service Type (Management, MP, P2P).rw ServiceType .1.3.6.1.4.1.2281.10.8.5.2.1.2 |
genEquipServicesCetConfigAdminService Admin state.rw ServiceAdmin .1.3.6.1.4.1.2281.10.8.5.2.1.3 |
genEquipServicesCetConfigMacTableSizeMAC Table size of the service,granularity of 16.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.2.1.4 |
genEquipServicesCetConfigDefaultCosService default CoS.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.2.1.5 |
genEquipServicesCetConfigCosModeService CoS Color mode.rw ServiceCosMode .1.3.6.1.4.1.2281.10.8.5.2.1.6 |
genEquipServicesCetConfigEvcIdEthernet Virtual Connection (EVC) ID.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.5.2.1.7 |
genEquipServicesCetConfigEvcDescriptionEthernet Virtual Connection (EVC) Description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.5.2.1.8 |
genEquipServicesCetConfigSplitHorizonSplit Horizon group Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.2.1.9 |
genEquipServicesCetConfigResiliencyProtocolInstanceResiliency Protocol Instance.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.2.1.10 |
genEquipServicesCetConfigProtectingTrailProtecting trail.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.2.1.11 |
genEquipServicesCetConfigProtectingTrailIndexProtecting trail id.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.2.1.12 |
genEquipServicesCetConfigServiceSubTypeService sub type (Ethernet / TDM / PWE)rw ServiceSubType .1.3.6.1.4.1.2281.10.8.5.2.1.13 |
genEquipServicesCetConfigTrailIndexTDM Trail IDrw INTEGER .1.3.6.1.4.1.2281.10.8.5.2.1.14 |
genEquipServicesCetConfigRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.5.2.1.30 |
genEquipServicesCetStatusTableEthernet Services status table - the table describes the status of the configured services. SEQUENCE OF GenEquipServicesCetStatusEntry .1.3.6.1.4.1.2281.10.8.5.3 |
genEquipServicesCetStatusEntryEthernet Services status table - the table describes the status of the configured services entry. GenEquipServicesCetStatusEntry .1.3.6.1.4.1.2281.10.8.5.3.1 |
genEquipServicesCetStatusIndexService ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.3.1.1 |
genEquipServicesCetStatusMulticastConfigured Multicast Group.ro EnableDisable .1.3.6.1.4.1.2281.10.8.5.3.1.2 |
genEquipServicesCetSpConfigTableEthernet Service Points (SP) configuration table -
this table describes the ingress and egress attributes (operation) per SPs of each service. SEQUENCE OF GenEquipServicesCetSpConfigEntry .1.3.6.1.4.1.2281.10.8.5.4 |
genEquipServicesCetSpConfigEntryEthernet Service Points (SP) configuration table entry -
this table describes the ingress and egress attributes (operation) per SPs of each service. GenEquipServicesCetSpConfigEntry .1.3.6.1.4.1.2281.10.8.5.4.1 |
genEquipServicesCetSpConfigServiceIndexService ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.4.1.1 |
genEquipServicesCetSpConfigServicePointIndexService Point ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.4.1.2 |
genEquipServicesCetSpConfigSpTypeService Point Type (SAP, SNP, PIPE, MNG).rw SPType .1.3.6.1.4.1.2281.10.8.5.4.1.3 |
genEquipServicesCetSpConfigSpSubtypeThe Service Point Attached Interface Type.rw SPSubType .1.3.6.1.4.1.2281.10.8.5.4.1.4 |
genEquipServicesCetSpConfigSpNameService Point Name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.5.4.1.5 |
genEquipServicesCetSpConfigIfIndexEthernet Logical port if-index ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.4.1.6 |
genEquipServicesCetSpConfigSvlanEncapS-Vlan Encapsulation.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.4.1.7 |
genEquipServicesCetSpConfigCvlanEncapC-Vlan Encapsulation.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.4.1.8 |
genEquipServicesCetSpConfigLearningService Point Learning Admin (disable / enable).rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.4.1.9 |
genEquipServicesCetSpConfigFloodingSP Ingress aatribute - Allow Flooding of the incoming packet.rw DisableAllowed .1.3.6.1.4.1.2281.10.8.5.4.1.10 |
genEquipServicesCetSpConfigBroadcastSP Ingress aatribute - Allow Broadcast of the incoming packet.rw DisableAllowed .1.3.6.1.4.1.2281.10.8.5.4.1.11 |
genEquipServicesCetSpConfigCosModeService Point CoS Color mode.rw SPCosMode .1.3.6.1.4.1.2281.10.8.5.4.1.12 |
genEquipServicesCetSpConfigDefCosService Point Default CoS.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.4.1.13 |
genEquipServicesCetSpConfigPclProfileIdpcl-profile-id.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.4.1.14 |
genEquipServicesCetSpConfigPclAdminPCL Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.4.1.15 |
genEquipServicesCetSpConfigMonitorCounterGroupSP Ingress attribute - Assign the SP to a specific Monitor Counters Group.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.4.1.16 |
genEquipServicesCetSpConfigSplitHorizonSplit Horizon Group.rw SplitHorizonGroup .1.3.6.1.4.1.2281.10.8.5.4.1.17 |
genEquipServicesCetSpConfigSvlanEgressPreserveSP Egress attribute - Preserve the S VLAN as it was on the Ingress Service Point.rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.4.1.18 |
genEquipServicesCetSpConfigSvlanCosPreserveSP Egress attribute - Preserve the S VLAN CoS as it was on the Ingress Service Point.rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.4.1.19 |
genEquipServicesCetSpConfigCvlanEgressPreserveSP Egress attribute - Preserve the C VLAN as it was on the Ingress Service Point.rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.4.1.20 |
genEquipServicesCetSpConfigCvlanCosPreserveSP Egress attribute - Preserve the C VLAN CoS as it was on the Ingress Service Point.rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.4.1.21 |
genEquipServicesCetSpConfigMarkingModeSP Ingress attribute - Enable / Disable Marking of the incoming packet.rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.4.1.22 |
genEquipServicesCetSpConfigServiceClassIdSP Egress attribute - Service Bundle ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.4.1.23 |
genEquipServicesCetSpConfigTcamClassificationTCAM-Classification.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.4.1.24 |
genEquipServicesCetSpConfigRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.5.4.1.30 |
genEquipServicesCetSpPolicerAssociationTableService Point and Service Point CoS Policing configuration table. SEQUENCE OF GenEquipServicesCetSpPolicerAssociationEntry .1.3.6.1.4.1.2281.10.8.5.5 |
genEquipServicesCetSpPolicerAssociationEntryService Point and Service Point CoS Policing configuration table. GenEquipServicesCetSpPolicerAssociationEntry .1.3.6.1.4.1.2281.10.8.5.5.1 |
genEquipServicesCetSpPolicerAssociationServiceIndexService ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.5.1.1 |
genEquipServicesCetSpPolicerAssociationSpIndexService Point ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.5.1.2 |
genEquipServicesCetSpPolicerAssociationSpPolicerAdminService Point Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.5.1.3 |
genEquipServicesCetSpPolicerAssociationCos0ProfileCoS 0 Policer attached Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.5.1.4 |
genEquipServicesCetSpPolicerAssociationCos0AdminCoS 0 Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.5.1.5 |
genEquipServicesCetSpPolicerAssociationCos1ProfileCoS 1 Policer attached Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.5.1.6 |
genEquipServicesCetSpPolicerAssociationCos1AdminCoS 1 Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.5.1.7 |
genEquipServicesCetSpPolicerAssociationCos2ProfileCoS 2 Policer attached Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.5.1.8 |
genEquipServicesCetSpPolicerAssociationCos2AdminCoS 2 Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.5.1.9 |
genEquipServicesCetSpPolicerAssociationCos3ProfileCoS 3 Policer attached Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.5.1.10 |
genEquipServicesCetSpPolicerAssociationCos3AdminCoS 3 Policer Admin (enable / disable).rw DisableAllowed .1.3.6.1.4.1.2281.10.8.5.5.1.11 |
genEquipServicesCetSpPolicerAssociationCos4ProfileCoS 4 Policer attached Profile ID.rw SPCosMode .1.3.6.1.4.1.2281.10.8.5.5.1.12 |
genEquipServicesCetSpPolicerAssociationCos4AdminCoS 4 Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.5.1.13 |
genEquipServicesCetSpPolicerAssociationCos5ProfileCoS 5 Policer attached Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.5.1.14 |
genEquipServicesCetSpPolicerAssociationCos5AdminCoS 5 Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.5.1.15 |
genEquipServicesCetSpPolicerAssociationCos6ProfileCoS 6 Policer attached Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.5.1.16 |
genEquipServicesCetSpPolicerAssociationCos6AdminCoS 6 Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.5.1.17 |
genEquipServicesCetSpPolicerAssociationCos7ProfileCoS 7 Policer attached Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.5.1.18 |
genEquipServicesCetSpPolicerAssociationCos7AdminCoS 7 Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.8.5.5.1.19 |
genEquipServicesCetSpPolicerAssociationRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.5.5.1.30 |
genEquipServicesCetSpVlanMappingTableThe table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point. SEQUENCE OF GenEquipServicesCetSpVlanMappingEntry .1.3.6.1.4.1.2281.10.8.5.6 |
genEquipServicesCetSpVlanMappingEntryThe table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point. GenEquipServicesCetSpVlanMappingEntry .1.3.6.1.4.1.2281.10.8.5.6.1 |
genEquipServicesCetSpVlanMappingServiceIdService ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.6.1.1 |
genEquipServicesCetSpVlanMappingSpIdService Point ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.6.1.2 |
genEquipServicesCetSpVlanMappingSvlanIndexS-Vlan Encapsulation.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.6.1.3 |
genEquipServicesCetSpVlanMappingCvlanIndexC-Vlan Encapsulation.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.6.1.4 |
genEquipServicesCetSpVlanMappingVlanCosOverrideThe CoS Value field is valid.rw TrueFalse .1.3.6.1.4.1.2281.10.8.5.6.1.5 |
genEquipServicesCetSpVlanMappingVlanDefCosCoS overwrite value.rw INTEGER .1.3.6.1.4.1.2281.10.8.5.6.1.6 |
genEquipServicesCetSpVlanMappingColorService Point COLOR.rw GreenYellow .1.3.6.1.4.1.2281.10.8.5.6.1.7 |
genEquipServicesCetSpVlanMappingIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.6.1.8 |
genEquipServicesCetSpVlanMappingIfSlotIndexSlot index.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.6.1.9 |
genEquipServicesCetSpVlanMappingIfPortIndexPort index.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.6.1.10 |
genEquipServicesCetSpVlanMappingRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.5.6.1.30 |
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsTableClear all interface egress queues statistics. SEQUENCE OF GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry .1.3.6.1.4.1.2281.10.8.5.7 |
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntryClear all interface egress queues statistics. GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry .1.3.6.1.4.1.2281.10.8.5.7.1 |
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndexifIndex.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.7.1.1 |
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsClearOnReadClear all statistics for the specific port.rw NoYes .1.3.6.1.4.1.2281.10.8.5.7.1.2 |
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsTableClear all Service egress queues statistics. SEQUENCE OF GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry .1.3.6.1.4.1.2281.10.8.5.8 |
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntryClear all Service egress queues statistics. GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry .1.3.6.1.4.1.2281.10.8.5.8.1 |
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndexifIndex.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.8.1.1 |
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndexEgress service bundle ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.5.8.1.2 |
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsClearOnReadclear on read.rw NoYes .1.3.6.1.4.1.2281.10.8.5.8.1.3 |
genEquipServicesTM OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.6 |
genEquipTmMapping OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.6.1 |
genEquipTmMappingSVlanPriToCosTableGlobal 802.1AD classification table to CoS and Color. SEQUENCE OF GenEquipTmMappingSVlanPriToCosEntry .1.3.6.1.4.1.2281.10.8.6.1.1 |
genEquipTmMappingSVlanPriToCosEntryGlobal 802.1AD classification table to CoS and Color entry. GenEquipTmMappingSVlanPriToCosEntry .1.3.6.1.4.1.2281.10.8.6.1.1.1 |
genEquipTmMappingSVlanPriToCosUpIndexUser Priority bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.1.1.1.1 |
genEquipTmMappingSVlanPriToCosDeiIndexDEI bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.1.1.1.2 |
genEquipTmMappingSVlanPriToCosCosCoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.1.1.1.3 |
genEquipTmMappingSVlanPriToCosColorColor bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color.rw GreenYellow .1.3.6.1.4.1.2281.10.8.6.1.1.1.4 |
genEquipTmMappingCVlanPriToCosTableGlobal 802.1Q classification table to CoS and Color. SEQUENCE OF GenEquipTmMappingCVlanPriToCosEntry .1.3.6.1.4.1.2281.10.8.6.1.2 |
genEquipTmMappingCVlanPriToCosEntryGlobal 802.1Q classification table to CoS and Color entry. GenEquipTmMappingCVlanPriToCosEntry .1.3.6.1.4.1.2281.10.8.6.1.2.1 |
genEquipTmMappingCVlanPriToCosUpIndexUser Priority bits - Global 802.1Q User Priority and CFI bits classification table to CoS and Color.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.1.2.1.1 |
genEquipTmMappingCVlanPriToCosCfiIndexCFI bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.1.2.1.2 |
genEquipTmMappingCVlanPriToCosCosCoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.1.2.1.3 |
genEquipTmMappingCVlanPriToCosColorColor bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color.rw GreenYellow .1.3.6.1.4.1.2281.10.8.6.1.2.1.4 |
genEquipTmMappingDscpToCosTableGlobal DSCP bits classification table to CoS and Color. SEQUENCE OF GenEquipTmMappingDscpToCosEntry .1.3.6.1.4.1.2281.10.8.6.1.3 |
genEquipTmMappingDscpToCosEntryGlobal DSCP bits classification table to CoS and Color entry. GenEquipTmMappingDscpToCosEntry .1.3.6.1.4.1.2281.10.8.6.1.3.1 |
genEquipTmMappingDscpToCosDscpIndexDSCP bits - Global DSCP bits classification table to CoS and Color.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.1.3.1.1 |
genEquipTmMappingDscpToCosBinaryGlobal DSCP bits classification table to CoS and Color.rw OCTET STRING .1.3.6.1.4.1.2281.10.8.6.1.3.1.2 |
genEquipTmMappingDscpToCosDescriptionuser description field - Global DSCP bits classification table to CoS and Color.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.1.3.1.3 |
genEquipTmMappingDscpToCosCosCoS bits - Global DSCP bits classification table to CoS and Color.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.1.3.1.4 |
genEquipTmMappingDscpToCosColorColor bit - Global DSCP bits classification table to CoS and Color.rw GreenYellow .1.3.6.1.4.1.2281.10.8.6.1.3.1.5 |
genEquipTmMappingMPLSExpPriToCosTableColor bit - Global MPLS EXP bits classification table to CoS and Color. SEQUENCE OF GenEquipTmMappingMPLSExpPriToCosEntry .1.3.6.1.4.1.2281.10.8.6.1.4 |
genEquipTmMappingMPLSExpPriToCosEntryColor bit - Global MPLS EXP bits classification table to CoS and Color entry. GenEquipTmMappingMPLSExpPriToCosEntry .1.3.6.1.4.1.2281.10.8.6.1.4.1 |
genEquipTmMappingMPLSExpPriToCosMplsExpIndexExperimental bits - Global MPLS EXP bits classification table to CoS and Color.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.1.4.1.1 |
genEquipTmMappingMPLSExpPriToCosCosCoS bit - Global MPLS EXP bits classification table to CoS and Color.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.1.4.1.2 |
genEquipTmMappingMPLSExpPriToCosColorColor bit - Global MPLS EXP bits classification table to CoS and Color.rw GreenYellow .1.3.6.1.4.1.2281.10.8.6.1.4.1.3 |
genEquipTmMarkingSVlanPriTableGlobal 802.1AD Marking Table User CoS and Color to User Priority bits and DEI. SEQUENCE OF GenEquipTmMarkingSVlanPriEntry .1.3.6.1.4.1.2281.10.8.6.1.5 |
genEquipTmMarkingSVlanPriEntryGlobal 802.1AD Marking Table User CoS and Color to User Priority bits and DEI entry. GenEquipTmMarkingSVlanPriEntry .1.3.6.1.4.1.2281.10.8.6.1.5.1 |
genEquipTmMarkingSVlanPriCosIndexCoS bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.1.5.1.1 |
genEquipTmMarkingSVlanPriColorIndexColor bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI.ro GreenYellow .1.3.6.1.4.1.2281.10.8.6.1.5.1.2 |
genEquipTmMarkingSVlanPriUserPriorityUser Priority bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.1.5.1.3 |
genEquipTmMarkingSVlanPriDEIDEI bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.1.5.1.4 |
genEquipTmMarkingCVlanPriTableGlobal 802.1Q Marking Table User CoS and Color to User Priority bits and CFI. SEQUENCE OF GenEquipTmMarkingCVlanPriEntry .1.3.6.1.4.1.2281.10.8.6.1.6 |
genEquipTmMarkingCVlanPriEntryGlobal 802.1Q Marking Table User CoS and Color to User Priority bits and CFI entry. GenEquipTmMarkingCVlanPriEntry .1.3.6.1.4.1.2281.10.8.6.1.6.1 |
genEquipTmMarkingCVlanPriCosIndexCoS bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.1.6.1.1 |
genEquipTmMarkingCVlanPriColorIndexColor bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI.ro GreenYellow .1.3.6.1.4.1.2281.10.8.6.1.6.1.2 |
genEquipTmMarkingCVlanPriUserPriorityUser Priority bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.1.6.1.3 |
genEquipTmMarkingCVlanPriCFICFI bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.1.6.1.4 |
genEquipTmProfiles OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.6.2 |
genEquipProfilesPolicerTableGeneral Policer Profile configuration table. SEQUENCE OF GenEquipProfilesPolicerEntry .1.3.6.1.4.1.2281.10.8.6.2.1 |
genEquipProfilesPolicerEntryGeneral Policer Profile configuration table entry. GenEquipProfilesPolicerEntry .1.3.6.1.4.1.2281.10.8.6.2.1.1 |
genEquipProfilesPolicerIndexUser Profile ID number.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.2.1.1.1 |
genEquipProfilesPolicerDescriptionIngress Policer user Description field.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.1.1.2 |
genEquipProfilesPolicerPolicerTypeIngress Policer Type (MEF TrTCM,RFC2697,RFC2698).ro PolicerType .1.3.6.1.4.1.2281.10.8.6.2.1.1.3 |
genEquipProfilesPolicerCirIngress Policer Commited Information Rate (CIR).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.1.1.4 |
genEquipProfilesPolicerCbsIngress Policer Commited Burst Size (CBS).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.1.1.5 |
genEquipProfilesPolicerEirIngress Policer Excess Information Rate (EIR).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.1.1.6 |
genEquipProfilesPolicerEbsIngress Policer Excess Burst Size (EBS).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.1.1.7 |
genEquipProfilesPolicerColorModeIngress Policer Color Mode (Color Aware or Color Blind).rw PolicerColorMode .1.3.6.1.4.1.2281.10.8.6.2.1.1.8 |
genEquipProfilesPolicerCouplingFlagModeIngress Policer Coupling Flag between Green and Yellow leaky buckets.rw EnableDisable .1.3.6.1.4.1.2281.10.8.6.2.1.1.9 |
genEquipProfilesPolicerDataPlaneIdThe real policer ID in the dataplan 0 to 10000.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.2.1.1.10 |
genEquipProfilesPolicerRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.2.1.1.30 |
genEquipProfilesL4WredTableGreen Curve Maximal Drop Ratio (in percentage). SEQUENCE OF GenEquipProfilesL4WredEntry .1.3.6.1.4.1.2281.10.8.6.2.2 |
genEquipProfilesL4WredEntryGreen Curve Maximal Drop Ratio (in percentage) entry. GenEquipProfilesL4WredEntry .1.3.6.1.4.1.2281.10.8.6.2.2.1 |
genEquipProfilesL4WredIndexWRED Curves Profile ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.2.2.1.1 |
genEquipProfilesL4WredGreenMinThresholdGreen Curve Minimal occupancy (No drop until this level).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.2.1.2 |
genEquipProfilesL4WredGreenMaxThresholdGreen Curve Maximal occupancy (from this point 100% will be dropped).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.2.1.3 |
genEquipProfilesL4WredGreenMaxDropGreen Curve Maximal Drop Ratio (in percentage).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.2.1.4 |
genEquipProfilesL4WredYellowMinThresholdYellow Curve Minimal occupancy (No drop until this level).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.2.1.5 |
genEquipProfilesL4WredYellowMaxThresholdYellow Curve Maximal occupancy (from this point 100% will be dropped).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.2.1.6 |
genEquipProfilesL4WredYellowMaxDropYellow Curve Maximal Drop Ratio (in percentage).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.2.1.7 |
genEquipProfilesL4WredYellowRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.2.2.1.30 |
genEquipProfilesSchedulerCoSPriTableThe table holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port). SEQUENCE OF GenEquipProfilesSchedulerCoSPriEntry .1.3.6.1.4.1.2281.10.8.6.2.3 |
genEquipProfilesSchedulerCoSPriEntryThe table entry holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port). GenEquipProfilesSchedulerCoSPriEntry .1.3.6.1.4.1.2281.10.8.6.2.3.1 |
genEquipProfilesSchedulerCoSPriIndexProfile ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.2.3.1.1 |
genEquipProfilesSchedulerCoSPriCos0DescriptionCoS 0 Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.3.1.2 |
genEquipProfilesSchedulerCoSPriGreenCos0PriorityGreen CoS 0 priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.3.1.3 |
genEquipProfilesSchedulerCoSPriCos1descriptionCoS 1 Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.3.1.4 |
genEquipProfilesSchedulerCoSPriGreenCos1PriorityGreen CoS 1 priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.3.1.5 |
genEquipProfilesSchedulerCoSPriCos2DescriptionCoS 2 Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.3.1.6 |
genEquipProfilesSchedulerCoSPriGreenCos2PriorityGreen CoS 2 priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.3.1.7 |
genEquipProfilesSchedulerCoSPriCos3descriptionCoS 3 Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.3.1.8 |
genEquipProfilesSchedulerCoSPriGreenCos3PriorityGreen CoS 3 priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.3.1.9 |
genEquipProfilesSchedulerCoSPriCos4descriptionCoS 4 Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.3.1.10 |
genEquipProfilesSchedulerCoSPriGreenCos4PriorityGreen CoS 4 priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.3.1.11 |
genEquipProfilesSchedulerCoSPriCos5descriptionCoS 5 Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.3.1.12 |
genEquipProfilesSchedulerCoSPriGreenCos5PriorityGreen CoS 5 priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.3.1.13 |
genEquipProfilesSchedulerCoSPriCos6descriptionCoS 6 Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.3.1.14 |
genEquipProfilesSchedulerCoSPriGreenCos6PriorityGreen CoS 6 priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.3.1.15 |
genEquipProfilesSchedulerCoSPriCos7descriptionCoS 7 Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.3.1.16 |
genEquipProfilesSchedulerCoSPriGreenCos7PriorityGreen CoS 7 priority.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.2.3.1.17 |
genEquipProfilesSchedulerCoSPriRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.2.3.1.30 |
genEquipProfilesSchedulerWfqTableThe table holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port). SEQUENCE OF GenEquipProfilesSchedulerWfqEntry .1.3.6.1.4.1.2281.10.8.6.2.4 |
genEquipProfilesSchedulerWfqEntryThe table entry holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port). GenEquipProfilesSchedulerWfqEntry .1.3.6.1.4.1.2281.10.8.6.2.4.1 |
genEquipProfilesSchedulerWfqIndexWFQ Profile ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.2.4.1.1 |
genEquipProfilesSchedulerWfqCos0WeightCoS 0 Weight.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.4.1.2 |
genEquipProfilesSchedulerWfqCos1WeightCoS 1 Weight.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.4.1.3 |
genEquipProfilesSchedulerWfqCos2WeightCoS 2 Weight.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.4.1.4 |
genEquipProfilesSchedulerWfqCos3WeightCoS 3 Weight.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.4.1.5 |
genEquipProfilesSchedulerWfqCos4WeightCoS 4 Weight.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.4.1.6 |
genEquipProfilesSchedulerWfqCos5WeightGreen CoS 2 priority.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.4.1.7 |
genEquipProfilesSchedulerWfqCos6WeightCoS 3 Description.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.4.1.8 |
genEquipProfilesSchedulerWfqCos7WeightCoS 7 Weight.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.4.1.9 |
genEquipProfilesSchedulerWfqRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.2.4.1.30 |
genEquipProfilesL2ShaperTableThe table holds the Egress Shaper profiles at port level. SEQUENCE OF GenEquipProfilesL2ShaperEntry .1.3.6.1.4.1.2281.10.8.6.2.5 |
genEquipProfilesL2ShaperEntryThe table entry holds the Egress Shaper profiles at port level. GenEquipProfilesL2ShaperEntry .1.3.6.1.4.1.2281.10.8.6.2.5.1 |
genEquipProfilesL2ShaperIndexShaper Profile ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.2.5.1.1 |
genEquipProfilesL2ShaperDescriptionShaper Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.5.1.2 |
genEquipProfilesL2ShaperCirCommitted Information Rate (in Bits).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.5.1.3 |
genEquipProfilesL2ShaperCbsCommitted Burst Size (in Bytes).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.5.1.4 |
genEquipProfilesL2ShaperBurstTypeCBS burst type - short (minimal) size or long burst (recomanded for long RTT).rw BurstType .1.3.6.1.4.1.2281.10.8.6.2.5.1.5 |
genEquipProfilesL2ShaperRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.2.5.1.30 |
genEquipProfilesL3ServiceShaperTableThe table holds the Egress Shaper profiles at service level. SEQUENCE OF GenEquipProfilesL3ServiceShaperEntry .1.3.6.1.4.1.2281.10.8.6.2.6 |
genEquipProfilesL3ServiceShaperEntryThe table entry holds the Egress Shaper profiles at service level. GenEquipProfilesL3ServiceShaperEntry .1.3.6.1.4.1.2281.10.8.6.2.6.1 |
genEquipProfilesL3ServiceShaperIndexShaper Profile ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.2.6.1.1 |
genEquipProfilesL3ServiceShaperDescriptionShaper Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.6.1.2 |
genEquipProfilesL3ServiceShaperCirCommitted Information Rate (in Bits).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.6.1.3 |
genEquipProfilesL3ServiceShaperCbsCommitted Burst Size (in Bytes).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.6.1.4 |
genEquipProfilesL3ServiceShaperPirPeak Information Rate (in Bits).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.6.1.5 |
genEquipProfilesL3ServiceShaperPbsPeak Burst size (in Bytes).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.6.1.6 |
genEquipProfilesL3ServiceShaperBurstTypeCBS and PBS burst type - short (minimal) size or long burst (recomanded for long RTT).rw BurstType .1.3.6.1.4.1.2281.10.8.6.2.6.1.7 |
genEquipProfilesL3ServiceShaperRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.2.6.1.30 |
genEquipProfilesEgressL4QueueShaperTableThe table holds the Egress Shaper profiles at Queue level. SEQUENCE OF GenEquipProfilesEgressL4QueueShaperEntry .1.3.6.1.4.1.2281.10.8.6.2.7 |
genEquipProfilesEgressL4QueueShaperEntryThe table entry holds the Egress Shaper profiles at Queue level. GenEquipProfilesEgressL4QueueShaperEntry .1.3.6.1.4.1.2281.10.8.6.2.7.1 |
genEquipProfilesEgressL4QueueShaperIndexShaper Profile ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.2.7.1.1 |
genEquipProfilesEgressL4QueueShaperDescriptionShaper Description.rw DisplayString .1.3.6.1.4.1.2281.10.8.6.2.7.1.2 |
genEquipProfilesEgressL4QueueShaperCirCommitted Information Rate (in Bits).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.7.1.3 |
genEquipProfilesEgressL4QueueShaperCbsCommitted Burst Size (in Bytes).rw INTEGER .1.3.6.1.4.1.2281.10.8.6.2.7.1.4 |
genEquipProfilesEgressL4QueueShaperBurstTypeCBS burst type - short (minimal) size or long burst (recomanded for long RTT).rw BurstType .1.3.6.1.4.1.2281.10.8.6.2.7.1.5 |
genEquipProfilesEgressL4QueueShaperRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.2.7.1.30 |
genEquipTmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.8.6.3 |
genEquipTmL4WredAssociationTableThe table holds the user selelcted WRED profile for eac Egress Queue. SEQUENCE OF GenEquipTmL4WredAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.1 |
genEquipTmL4WredAssociationEntryThe table entry holds the user selelcted WRED profile for eac Egress Queue. GenEquipTmL4WredAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.1.1 |
genEquipTmL4WredAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.1.1.1 |
genEquipTmL4WredAssociationServiceIndexService Bundle ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.1.1.2 |
genEquipTmL4WredAssociationCosQueueIndexCoS Queue ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.1.1.3 |
genEquipTmL4WredAssociationWredProfileIdWRED Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.3.1.1.4 |
genEquipTmSchedulerCoSPriAssociationTableThe table holds the user selected Scheduler Priority Profile for each Egress port. SEQUENCE OF GenEquipTmSchedulerCoSPriAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.2 |
genEquipTmSchedulerCoSPriAssociationEntryThe table entry holds the user selected Scheduler Priority Profile for each Egress port. GenEquipTmSchedulerCoSPriAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.2.1 |
genEquipTmSchedulerCoSPriAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.2.1.1 |
genEquipTmSchedulerCoSPriAssociationAssociatedProfileIdQueue Scheduler Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.3.2.1.2 |
genEquipTmL3ServiceShaperAssociationTableThe table holds the user selected Shapping profiles for each Service Bundle. SEQUENCE OF GenEquipTmL3ServiceShaperAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.3 |
genEquipTmL3ServiceShaperAssociationEntryThe table entry holds the user selected Shapping profiles for each Service Bundle. GenEquipTmL3ServiceShaperAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.3.1 |
genEquipTmL3ServiceShaperAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.3.1.1 |
genEquipTmL3ServiceShaperAssociationServiceClassIndexService Bundle ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.3.1.2 |
genEquipTmL3ServiceShaperAssociationShaperProfileIdShaper Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.3.3.1.3 |
genEquipTmL3ServiceShaperAssociationShaperAdminShaper Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.8.6.3.3.1.4 |
genEquipTmL3ServiceShaperAssociationRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.3.3.1.30 |
genEquipTmL2ShaperAssociationTableThe table holds the user selected Shapping profiles for each Ethernet Port. SEQUENCE OF GenEquipTmL2ShaperAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.4 |
genEquipTmL2ShaperAssociationEntryThe table entry holds the user selected Shapping profiles for each Ethernet Port. GenEquipTmL2ShaperAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.4.1 |
genEquipTmL2ShaperAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.4.1.1 |
genEquipTmL2ShaperAssociationProfileIdPort Shaper Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.3.4.1.2 |
genEquipTmL2ShaperAssociationAdminPort Shaper Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.8.6.3.4.1.3 |
genEquipTmL2ShaperAssociationRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.3.4.1.30 |
genEquipTmL4QueueShaperAssociationTableThe table holds the user selected Shapping profiles for each Ethernet PortThe table holds the user selected Shapping profiles for each transmitting Queue. SEQUENCE OF GenEquipTmL4QueueShaperAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.5 |
genEquipTmL4QueueShaperAssociationEntryThe table entry holds the user selected Shapping profiles for each transmitting Queue. GenEquipTmL4QueueShaperAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.5.1 |
genEquipTmL4QueueShaperAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.5.1.1 |
genEquipTmL4QueueShaperAssociationServiceIndexService Bundle ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.5.1.2 |
genEquipTmL4QueueShaperAssociationCosQueueIndexCoS Queue ID.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.5.1.3 |
genEquipTmL4QueueShaperAssociationShaperProfileIdQueue Shaper Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.8.6.3.5.1.4 |
genEquipTmL4QueueShaperAssociationShaperProfileAdminQueue Shaper Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.8.6.3.5.1.5 |
genEquipTmL4QueueShaperAssociationRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.8.6.3.5.1.30 |
genEquipTmSchedulerWfqAssociationTableThe table holds the user selected Scheduler WFQ weights Profile for each Egress port. SEQUENCE OF GenEquipTmSchedulerWfqAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.6 |
genEquipTmSchedulerWfqAssociationEntryThe table entry holds the user selected Scheduler WFQ weights Profile for each Egress port. GenEquipTmSchedulerWfqAssociationEntry .1.3.6.1.4.1.2281.10.8.6.3.6.1 |
genEquipTmSchedulerWfqAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.8.6.3.6.1.1 |
genEquipTmSchedulerWfqAssociationProfileIdWFQ Scheduler Profile IDrw INTEGER .1.3.6.1.4.1.2281.10.8.6.3.6.1.2 |
genEquipInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9 |
genEquipInterfacesEther OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.1 |
genEquipInterfacesEtherTableEthernet interface configuration and status table.
The index of the table is via ifIndex, as well as the operational status and the admin state,
speed and port connector. SEQUENCE OF GenEquipInterfacesEtherEntry .1.3.6.1.4.1.2281.10.9.1.1 |
genEquipInterfacesEtherEntryEthernet interface configuration and status table.
The index of the table is via ifIndex, as well as the operational status and the admin state,
speed and port connector. GenEquipInterfacesEtherEntry .1.3.6.1.4.1.2281.10.9.1.1.1 |
genEquipInterfacesEtherConnTypeThe physical interface type. For port 8 the only valid value is radio. For ports 3 to 7 the only valid
value is rj45.rw Enumeration .1.3.6.1.4.1.2281.10.9.1.1.1.1 |
genEquipInterfacesEtherPortTypeThe type of the port.
Access - untagged port (in case of managed switch).
Trunk - C-VID tagged port (in case of managed switch).
CN - Don't care on the vlan tag (in case of metro switch configuration).
SN - S-VID is used as the first vlan (in case of metro switch configuration).rw Enumeration .1.3.6.1.4.1.2281.10.9.1.1.1.2 |
genEquipInterfacesEtherAutoNegotiationEnable or disable auto-negotiation on the port.rw Enumeration .1.3.6.1.4.1.2281.10.9.1.1.1.3 |
genEquipInterfacesEtherDuplexHalf or full duplex.rw HalfFull .1.3.6.1.4.1.2281.10.9.1.1.1.4 |
genEquipInterfacesEtherRate10, 100 OR 1000 Mbps.rw RateMbps .1.3.6.1.4.1.2281.10.9.1.1.1.5 |
genEquipInterfacesEtherPortLerningAdminEnable or disable MAC address learning in the port.rw Enumeration .1.3.6.1.4.1.2281.10.9.1.1.1.6 |
genEquipInterfacesEtherFlowCtrlEnable or disable flow control on the port. Supported only in pipe mode.rw Enumeration .1.3.6.1.4.1.2281.10.9.1.1.1.7 |
genEquipInterfacesEtherLagPortMemberThe syntax is ifIndex, or FFFF for port that is not member in a lag.rw Enumeration .1.3.6.1.4.1.2281.10.9.1.1.1.8 |
genEquipInterfacesEtherActualDuplexActual duplex (in auto-negotiation, the mode the two ports agreed upon) - Half or full duplex.ro HalfFull .1.3.6.1.4.1.2281.10.9.1.1.1.9 |
genEquipInterfacesEtherActualRateActual rate (in auto-negotiation, the rate the two ports agreed upon) - 10, 100 OR 1000 Mbps.ro RateMbps .1.3.6.1.4.1.2281.10.9.1.1.1.10 |
genEquipInterfacesEtherClkSrcThe source for the outgoing carrier signal clock. Local-clock is an internal independent oscilator.
system-clock-source causes the ethernet clock to be derived from the defined system clock source
(which can be taken from another interface)
Note: changing this parameter per port affect all the Ethernet ports.rw Enumeration .1.3.6.1.4.1.2281.10.9.1.1.1.11 |
genEquipInterfacesEtherPortServiceTypeThis parameter indicates whether the port is being used as a Service Access Point (SAP)
or as a Service Network Point (SNP) in a network-wide Ethernet service;
the parameter has no functionality, but is meant to hold data for the NMS.rw Enumeration .1.3.6.1.4.1.2281.10.9.1.1.1.12 |
genEquipInterfacesEtheMACAddressThe MAC address of the port for CFM or PWE3 addressing purposes.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.1.1.1.13 |
genEquipInterfacesEtherDefaultVLANIdDefault VLAN ID of the Ethernet interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.1.1.1.14 |
genEquipInterfacesEtherPortBlockSharedVlansWhen enabled, this parameter blocks transfer of Ethernet frames to/from other ports
for which it is enabled, effectively eliminating all shared VLANs.rw EnableDisable .1.3.6.1.4.1.2281.10.9.1.1.1.15 |
genEquipInterfacesEtherStatePropagationThis parameter configures the behavior of Ethernet ports in single
pipe mode. When a failure is detected, ports will be automatically shut
down when the configured conditions take place. The possible choices
are a combination of the following failures in the local and the remote IDUs:
radio LOF, Ethernet line LOC, radio excessive berrw Enumeration .1.3.6.1.4.1.2281.10.9.1.2 |
genEquipInterfacesEtherPWPortThe port in the traffic bridge connected to the PWE3 T-card.rw INTEGER .1.3.6.1.4.1.2281.10.9.1.3 |
genEquipInterfacesE1T1 OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.2 |
genEquipInterfacesE1T1PortGroupTableGeneral parameters for group of E1 or T1 interfaces. SEQUENCE OF GenEquipInterfacesE1T1PortGroupEntry .1.3.6.1.4.1.2281.10.9.2.1 |
genEquipInterfacesE1T1PortGroupEntryGeneral parameters for group of E1 or T1 interfaces. GenEquipInterfacesE1T1PortGroupEntry .1.3.6.1.4.1.2281.10.9.2.1.1 |
genEquipInterfacesE1T1PortGroupIdGroup id. the index of this table.ro INTEGER .1.3.6.1.4.1.2281.10.9.2.1.1.1 |
genEquipInterfacesE1T1PortGroupLineCodeThe PDH line coding. b8zs is for T1 and hdb3 for E1.
ami is only for T1. This parameter is
relevant only for versions up to 6.6.0.0.1.53 (including).rw Enumeration .1.3.6.1.4.1.2281.10.9.2.1.1.2 |
genEquipInterfacesE1T1PortGroupExcessiveBERthresholdExcessive BER threshold for the group of E1s/T1s.rw BerLevel .1.3.6.1.4.1.2281.10.9.2.1.1.3 |
genEquipInterfacesE1T1PortGroupSignalDegradeThresholdSignal degrade threshold for the group of E1s/T1s.rw Enumeration .1.3.6.1.4.1.2281.10.9.2.1.1.4 |
genEquipInterfacesE1T1PortGroupLineCode1to8The PDH line coding for line interfaces 1 to 8.
b8zs is for T1 and hdb3 for E1. ami is only for T1.rw Enumeration .1.3.6.1.4.1.2281.10.9.2.1.1.5 |
genEquipInterfacesE1T1PortGroupLineCode9to16The PDH line coding for line interfaces 9 to 16.
b8zs is for T1 and hdb3 for E1. ami is only for T1.rw Enumeration .1.3.6.1.4.1.2281.10.9.2.1.1.6 |
genEquipInterfacesE1T1PortGroupLineCode17to24The PDH line coding for line interfaces 17 to 24.
b8zs is for T1 and hdb3 for E1. ami is only for T1.rw Enumeration .1.3.6.1.4.1.2281.10.9.2.1.1.7 |
genEquipInterfacesE1T1PortGroupLineCode25to32The PDH line coding for interfaces 25 to 32.
b8zs is for T1 and hdb3 for E1. ami is only for T1.rw Enumeration .1.3.6.1.4.1.2281.10.9.2.1.1.8 |
genEquipInterfacesE1T1TableE1/T1 interface configuration table. SEQUENCE OF GenEquipInterfacesE1T1Entry .1.3.6.1.4.1.2281.10.9.2.2 |
genEquipInterfacesE1T1EntryE1/T1 interface configuration table. GenEquipInterfacesE1T1Entry .1.3.6.1.4.1.2281.10.9.2.2.1 |
genEquipInterfacesE1T1PriorityThe ACM priority of the E1/T1.
This parameter is relevant only for stand-alone mode.
In shelf this parameter is defined in the trail configuration.ro Enumeration .1.3.6.1.4.1.2281.10.9.2.2.1.1 |
genEquipInterfacesE1T1CurrBERE1/T1 current BER.ro BerLevel .1.3.6.1.4.1.2281.10.9.2.2.1.2 |
genEquipInterfacesE1T1LoopbackEnable or Disable line loopback on the E1/T1 interface.rw Enumeration .1.3.6.1.4.1.2281.10.9.2.2.1.3 |
genEquipInterfacesE1T1AISSStatusStatus of the AIS detection, if the AIS detection is activated.ro Enumeration .1.3.6.1.4.1.2281.10.9.2.2.1.4 |
genEquipInterfacesE1T1CableLengthThis parameter is valid only for T1 interfaces, and determines cable length range.rw Enumeration .1.3.6.1.4.1.2281.10.9.2.2.1.5 |
genEquipInterfacesAux OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.3 |
genEquipInterfacesAuxWaySide OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.3.1 |
genEquipInterfacesAuxWaySideTableWay-side interface configuration. SEQUENCE OF GenEquipInterfacesAuxWaySideEntry .1.3.6.1.4.1.2281.10.9.3.1.1 |
genEquipInterfacesAuxWaySideEntryWay-side interface configuration. GenEquipInterfacesAuxWaySideEntry .1.3.6.1.4.1.2281.10.9.3.1.1.1 |
genEquipInterfacesAuxWaySideAdminEnable - Set Ethernet port #4 to be a wayside port. Disabling this option will cause the port to behave
as a normal traffic Ethernet port.rw EnableDisable .1.3.6.1.4.1.2281.10.9.3.1.1.1.1 |
genEquipInterfacesAuxWaySideCapacityNarrow band (64Kbps) or Wide band (2Mbps)rw Enumeration .1.3.6.1.4.1.2281.10.9.3.1.1.1.2 |
genEquipInterfacesAuxWaySideAutoNegotiationWayside port auto negotiation (Off, on)rw OffOn .1.3.6.1.4.1.2281.10.9.3.1.1.1.3 |
genEquipInterfacesAuxWaySideDuplexWayside port duplex (Half, Full)rw Enumeration .1.3.6.1.4.1.2281.10.9.3.1.1.1.4 |
genEquipInterfacesAuxWaySideRateWayside interface port rate (10Mbps,100Mbps)rw Enumeration .1.3.6.1.4.1.2281.10.9.3.1.1.1.5 |
genEquipInterfacesAuxUserChanTableTable of configured user channels. SEQUENCE OF GenEquipInterfacesAuxUserChanEntry .1.3.6.1.4.1.2281.10.9.3.2 |
genEquipInterfacesAuxUserChanEntryTable of configured user channels. GenEquipInterfacesAuxUserChanEntry .1.3.6.1.4.1.2281.10.9.3.2.1 |
genEquipInterfacesAuxUserChanTypeUser channel type. The asynchronous modes allow two channels, one in each port.
The twin asynchronous mode uses port 1 for v.11 and port 2 for RS-232.
The Synchronous modes use two ports eachrw Enumeration .1.3.6.1.4.1.2281.10.9.3.2.1.1 |
genEquipInterfacesSdh OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.4 |
genEquipInterfacesSdhTableSTM-1,OC-3 interface configuration and status table. SEQUENCE OF GenEquipInterfacesSdhEntry .1.3.6.1.4.1.2281.10.9.4.1 |
genEquipInterfacesSdhEntrySTM-1,OC-3 interface configuration and status table. GenEquipInterfacesSdhEntry .1.3.6.1.4.1.2281.10.9.4.1.1 |
genEquipInterfacesSdhMuteTxMute Tx option on the interface.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.9.4.1.1.1 |
genEquipInterfacesSdhClockSourceThe source of the clock being used.
sync-vc option is for future support, to use one of the outgoing TDM VCs as a source.rw Enumeration .1.3.6.1.4.1.2281.10.9.4.1.1.2 |
genEquipInterfacesSdhAISAdminEnable, Disable AIS signaling at the V5 byte on the STM-1, OC-3 interface.rw EnableDisable .1.3.6.1.4.1.2281.10.9.4.1.1.3 |
genEquipInterfacesSdhTraceIdReceivedJ0 Trace Identifier signal that was received on the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.4.1.1.4 |
genEquipInterfacesSdhTraceIdTransmittedJ0 Trace Identifier signal that is transmitted on the interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.4.1.1.5 |
genEquipInterfacesSdhTraceIdExpectedJ0 Trace Identifier signal that is expected to be received on the interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.4.1.1.6 |
genEquipInterfacesSdhTraceIdStringLengthTrace identifier string length. Lengths 0 and 15 are valid for SDH systems. Length 62 is additionally available in SONET systems.rw Enumeration .1.3.6.1.4.1.2281.10.9.4.1.1.7 |
genEquipInterfacesSdhExcessiveBerExcessive BER threshold on the interface.rw Enumeration .1.3.6.1.4.1.2281.10.9.4.1.1.8 |
genEquipInterfacesSdhSignalDegradeSignal degrade threshold on the interface.rw Enumeration .1.3.6.1.4.1.2281.10.9.4.1.1.9 |
genEquipInterfacesSdhLoopbackSDH Loopback.rw Enumeration .1.3.6.1.4.1.2281.10.9.4.1.1.10 |
genEquipInterfacesSdhClockSourceStatusThe actual source of the clock for the outgoing STM-1/OC-3 signal.
It may differ from the desired source if the source signal is missing or corruptro Enumeration .1.3.6.1.4.1.2281.10.9.4.1.1.11 |
genEquipInterfacesSdhLineTxProtectionModethis parameter configures the behavior of the transmitting line in a 1+1 HSB configuration.
In normal mode the stand-by signal is silenced. In uni-directional MSP both units will transmitrw Enumeration .1.3.6.1.4.1.2281.10.9.4.1.1.12 |
genEquipInterfacesSdhSyncVCThe outgoing VC signal to be taken as the STM-1/OC-3 synchronization source if
genEquipInterfacesSdhClockSource is set to synchronization-vcrw INTEGER .1.3.6.1.4.1.2281.10.9.4.1.1.13 |
genEquipInterfacesSdhAdminAdministrative status of the STM-1/OC3 portrw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.9.4.1.1.14 |
genEquipInterfacesSdhPdhTimingModeClock reference for outgoing PDH signals configured in 'absolute clock' moderw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.9.4.1.1.15 |
genEquipInterfacesSdhSlotSlot IDro INTEGER .1.3.6.1.4.1.2281.10.9.4.1.1.16 |
genEquipInterfacesSdhIdleCodeValue to be transmitted at PDH signals inside the STM-1/OC3 when there is no data to transmitrw INTEGER .1.3.6.1.4.1.2281.10.9.4.1.1.17 |
genEquipInterfacesSdhSSMAdminSSM support admin for this interfacerw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.9.4.1.1.18 |
genEquipInterfacesSdhSSMPatternIndicates the default SSM pattern to be transmitted in case if TCC clock synchronization subsystem doesn't provide SSM pattern valuerw INTEGER .1.3.6.1.4.1.2281.10.9.4.1.1.19 |
genEquipInterfacesSdhTraceIdAdminEnable/disable of J0 mismatch checking on RX directionrw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.9.4.1.1.20 |
genEquipInterfacesSdhVCSignalLabelSets the signal label bits to be sent and expected in every VC-11/12;
use non-specific payload only for backwards compatibility with old equipmentrw Enumeration .1.3.6.1.4.1.2281.10.9.4.1.1.21 |
genEquipInterfacesSdhVcRdiAdminVC-RDI signaling admin statusrw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.9.4.1.1.22 |
genEquipInterfacesSdhLpVcTableThis table includes properties for each Low-order path VC (VC-11/12) in the SDH interface. SEQUENCE OF GenEquipInterfacesSdhLpVcEntry .1.3.6.1.4.1.2281.10.9.4.2 |
genEquipInterfacesSdhLpVcEntryThis table includes properties for each Low-order path VC (VC-11/12) in the SDH interface. GenEquipInterfacesSdhLpVcEntry .1.3.6.1.4.1.2281.10.9.4.2.1 |
genEquipInterfacesSdhLpVcIdVC-11 or VC-12 number; VCs are numbered according to standard KLM order.ro INTEGER .1.3.6.1.4.1.2281.10.9.4.2.1.1 |
genEquipInterfacesSdhLpVcAISIndicates whether incoming AIS is currently detected in the VC's payload. 0 indicates that AIS is detected, 1 that is not detected.ro Enumeration .1.3.6.1.4.1.2281.10.9.4.2.1.2 |
genEquipInterfacesSdhStatusTableSDH Status. SEQUENCE OF GenEquipInterfacesSdhStatusEntry .1.3.6.1.4.1.2281.10.9.4.3 |
genEquipInterfacesSdhStatusEntrySDH Status GenEquipInterfacesSdhStatusEntry .1.3.6.1.4.1.2281.10.9.4.3.1 |
genEquipInterfacesSdhStatusIfIndexPortnumberro INTEGER .1.3.6.1.4.1.2281.10.9.4.3.1.1 |
genEquipInterfacesSdhStatusLineBitmap field according to the following values: no-defect (1), AIS (2), RDI (4)ro INTEGER .1.3.6.1.4.1.2281.10.9.4.3.1.2 |
genEquipInterfacesSdhStatusOperStateInterface operational statusro DownUp .1.3.6.1.4.1.2281.10.9.4.3.1.3 |
genEquipInterfacesSdhStatusRegeneratorBitmap field according to the following values: no-defect (1), AIS (2), RDI (4)ro INTEGER .1.3.6.1.4.1.2281.10.9.4.3.1.4 |
genEquipInterfacesSdhStatusClockSourceStatusThe actual source of the clock for the outgoing STM-1/OC-3 signal.
It may differ from the desired source if the source signal is missing or corruptro PWPDHClockSource .1.3.6.1.4.1.2281.10.9.4.3.1.5 |
genEquipInterfacesSdhStatusPdhClockStatusPDH clock source statusro PWPDHClockSource .1.3.6.1.4.1.2281.10.9.4.3.1.6 |
genEquipInterfacesSdhStatusSlotIdSlot IDro INTEGER .1.3.6.1.4.1.2281.10.9.4.3.1.7 |
genEquipInterfacesSdhStatusLoopbackThe current state of the loopback for the SONET/SDH interfacero Enumeration .1.3.6.1.4.1.2281.10.9.4.3.1.8 |
genEquipInterfacesSdhStatusMultiplexerBitmask: no-defect (1), STS-LOP(2), STS-AIS(4), STS-RDI(8), unequipped (16), label-mismatch (32)ro INTEGER .1.3.6.1.4.1.2281.10.9.4.3.1.9 |
genEquipInterfacesSdhStatusSsmRxIndicates the currently received SSM bitsro INTEGER .1.3.6.1.4.1.2281.10.9.4.3.1.10 |
genEquipInterfacesSdhStatusSsmTxIndicates the currently transmitted SSM bitsro INTEGER .1.3.6.1.4.1.2281.10.9.4.3.1.11 |
genEquipInterfacesSdhLoopbackStatusTableSONET/SDH interface loopback status SEQUENCE OF GenEquipInterfacesSdhLoopbackStatusEntry .1.3.6.1.4.1.2281.10.9.4.4 |
genEquipInterfacesSdhLoopbackStatusEntrySONET/SDH interface loopback status entry GenEquipInterfacesSdhLoopbackStatusEntry .1.3.6.1.4.1.2281.10.9.4.4.1 |
genEquipInterfacesSdhLoopbackStatusIfIndexPortnumberro INTEGER .1.3.6.1.4.1.2281.10.9.4.4.1.1 |
genEquipInterfacesSdhLoopbackStatusSlotIdSlot IDro INTEGER .1.3.6.1.4.1.2281.10.9.4.4.1.2 |
genEquipInterfacesSdhLoopbackStatusTypeInterface operational statusrw Enumeration .1.3.6.1.4.1.2281.10.9.4.4.1.3 |
genEquipInterfacesSdhLoopbackStatusCounterCurrent value of STM1/OC3 interface Looback Timeout Counterro INTEGER .1.3.6.1.4.1.2281.10.9.4.4.1.4 |
genEquipInterfacesAIS OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.5 |
genEquipInterfacesAISAdminControl AIS Detection over all E1/T1/SDH ports.rw EnableDisable .1.3.6.1.4.1.2281.10.9.5.1 |
genEquipInterfacesASP OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.6 |
genEquipInterfacesASPAdminControls the Automatic State Propagationrw EnableDisable .1.3.6.1.4.1.2281.10.9.6.1 |
genEquipInterfacesASPLocalLOCEnables fault propagation upon detection of local LOC.
This configuration is relevant only for non-protected single-pipe switch mode only.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.2 |
genEquipInterfacesASPLocalExcessiveBEREnables fault propagation to the Ethernet interface upon detection of radio excessive BER.
This configuration is relevant only for non-protected single-pipe switch mode only.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.3 |
genEquipInterfacesASPACMthresholdEnable or disable the propagation when Radio ACM profile degrades below a defined profile.
This configuration is relevant only for non-protected single-pipe switch mode only when ACM
radio script is running.rw Enumeration .1.3.6.1.4.1.2281.10.9.6.4 |
genEquipInterfacesASPRemoteFaultThis parameter enables/disables automatic state propagation.
The following remote faults are propagated to the NE by default:
- Radio LOF
- Radio link ID mismatch
- Ethernet line LOC
any other remote faults are propagated to the NE only if they are
enabled at the local NErw EnableDisable .1.3.6.1.4.1.2281.10.9.6.5 |
genEquipInterfacesNGASP OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.6.7 |
genEquipInterfacesNGASPConfigTableThis table configures automatic state propagation functionality. SEQUENCE OF GenEquipInterfacesNGASPConfigEntry .1.3.6.1.4.1.2281.10.9.6.7.1 |
genEquipInterfacesNGASPConfigEntryThis table configures automatic state propagation functionality entry. GenEquipInterfacesNGASPConfigEntry .1.3.6.1.4.1.2281.10.9.6.7.1.1 |
genEquipInterfacesNGASPConfigControlledInterfaceIfindexIndex of the controlled interface.
This interface will be disabled upon initiation of auto state propagationro INTEGER .1.3.6.1.4.1.2281.10.9.6.7.1.1.1 |
genEquipInterfacesNGASPConfigAdminEnables/disables automatic state propagation.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.2 |
genEquipInterfacesNGASPConfigMonitoredInterfaceIfindexIndex to the monitored interface.
Auto state propagation will act upon detecting a failure indication on this interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.6.7.1.1.3 |
genEquipInterfacesNGASPConfigAcmThresholdACM profile threshold for initiating auto state propagation.rw INTEGER .1.3.6.1.4.1.2281.10.9.6.7.1.1.4 |
genEquipInterfacesNGASPConfigRadioExcessiveBerCriterionAdminInitiate auto state propagation upon local radio excessive BER.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.5 |
genEquipInterfacesNGASPConfigLinkIdMismatchCriterionAdminInitiate auto state propagation upon local radio link Id mismatch.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.6 |
genEquipInterfacesNGASPConfigRadioLofCriterionAdminInitiate auto state propagation upon local radio LOF.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.7 |
genEquipInterfacesNGASPConfigRemoteRadioLofCriterionAdminInitiate auto state propagation upon remote radio LOF.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.8 |
genEquipInterfacesNGASPConfigRxAcmThresholdCriterionAdminInitiate auto state propagation upon radio ACM RX profile below threshold.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.9 |
genEquipInterfacesNGASPConfigTxAcmThresholdCriterionAdminInitiate auto state propagation upon radio ACM TX profile below threshold.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.10 |
genEquipInterfacesNGASPConfigRemoteEthLocCriterionAdminInitiate auto state propagation due to remote ethernet LOC.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.11 |
genEquipInterfacesNGASPConfigRemoteFaultTriggerAdminAuto state propagation trigger by remote fault.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.12 |
genEquipInterfacesNGASPConfigRemoteRadioExcessiveBerCriterionAdminInitiate auto state propagation upon remote radio excessive BER.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.13 |
genEquipInterfacesNGASPConfigMonitoredInterface56Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.6.7.1.1.14 |
genEquipInterfacesNGASPConfigCsfModeAdminThis mode upon failure sends CSF OAM packet instead of shuting down port.rw EnableDisable .1.3.6.1.4.1.2281.10.9.6.7.1.1.15 |
genEquipInterfacesNGASPConfigMonitoredInterfaceIndex to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.6.7.1.1.16 |
genEquipInterfacesNGASPConfigDelayTimeDebounce time for ASP (in milliseconds)rw INTEGER .1.3.6.1.4.1.2281.10.9.6.7.1.1.17 |
genEquipInterfacesNGASPConfigRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.6.7.1.1.30 |
genEquipInterfacesPW OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.7 |
genEquipInterfacesPWCardTablePW-Card configuration table. using the table to configure the system PW-T features. SEQUENCE OF GenEquipInterfacesPWCardEntry .1.3.6.1.4.1.2281.10.9.7.1 |
genEquipInterfacesPWCardEntryPW-Card configuration table. using the table to configure the system PW-T features. GenEquipInterfacesPWCardEntry .1.3.6.1.4.1.2281.10.9.7.1.1 |
genEquipInterfacesPWCardSlotNumberSlot number where the relevant PW card is inserted.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.1.1.1 |
genEquipInterfacesPWCardExportClkSysRefWhich card clock to provide as source towards system reference clock;
FrontPanel takes the clock inserted into the front panel interface;
ClockRecovery takes the clock recovered from the PW service mapped to the TDM port defined in ExportClkSysRefCrPort.rw Enumeration .1.3.6.1.4.1.2281.10.9.7.1.1.2 |
genEquipInterfacesPWCardExportClkFrontPannelWhich clock to export to the front panel clock; SysRefClk exports the system reference clock;
ClockRecovery exports the clock recovered from the PW service mapped to the TDM port defined in ExportClkFrontPanelCrPort.ro Enumeration .1.3.6.1.4.1.2281.10.9.7.1.1.3 |
genEquipInterfacesPWCardExportClkSysRefCrPortTDM port serving as clock recovery reference if ExportClkSysRef is set to ClockRecovery.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.1.1.4 |
genEquipInterfacesPWCardExportClkFrontPanelCrPortTDM port serving as clock recovery reference if ExportClkFrontPannel is set to ClockRecovery.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.1.1.5 |
genEquipInterfacesPWCardFrontPanelClockSignalInputConfigure the type of input clock signal of the front panel port.
Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal.rw Enumeration .1.3.6.1.4.1.2281.10.9.7.1.1.6 |
genEquipInterfacesPWCardFrontPanelClockSignalOutpConfigure the type of output clock signal of the front panel port.
Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal.rw Enumeration .1.3.6.1.4.1.2281.10.9.7.1.1.7 |
genEquipInterfacesPWCardIpAddrUdpIpTrafficIP Address for UDP/IP encapsulated PWs.rw IpAddress .1.3.6.1.4.1.2281.10.9.7.1.1.8 |
genEquipInterfacesPWCardIpSubnetUdpIpTrafficIP Subnet for UDP/IP encapsulated PWs.rw IpAddress .1.3.6.1.4.1.2281.10.9.7.1.1.9 |
genEquipInterfacesPWCardClkRecoveryModeClock recovery mode for the card.rw Enumeration .1.3.6.1.4.1.2281.10.9.7.1.1.10 |
genEquipInterfacesPWCardDifferentialClkFrequencyFrequency for differential clock (none for adaptive).rw Enumeration .1.3.6.1.4.1.2281.10.9.7.1.1.11 |
genEquipInterfacesPWCardDifferentialClkSourceReference clock source for differential clock recovery (none for adaptive).rw Enumeration .1.3.6.1.4.1.2281.10.9.7.1.1.12 |
genEquipInterfacesServicesPWTDMPortsTableThis table allows configuration of the 16 internal E1/DS1 ports. SEQUENCE OF GenEquipInterfacesServicesPWTDMPortsEntry .1.3.6.1.4.1.2281.10.9.7.2 |
genEquipInterfacesServicesPWTDMPortsEntryThis table allows configuration of the 16 internal E1/DS1 ports. GenEquipInterfacesServicesPWTDMPortsEntry .1.3.6.1.4.1.2281.10.9.7.2.1 |
genEquipInterfacesServicesPWTDMPortsLineTypeLine type of this TDM port. E1 types are for E1 systems and DS1 types for DS1 systems.rw Enumeration .1.3.6.1.4.1.2281.10.9.7.2.1.1 |
genEquipInterfacesServicesPWTDMPortsLineCodingLine coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1.
Ami is only for T1.rw NoYes .1.3.6.1.4.1.2281.10.9.7.2.1.2 |
genEquipInterfacesServicesPWTDMPortsAssignedIndication whether this port is currently assigned to a TDM trail.ro NoYes .1.3.6.1.4.1.2281.10.9.7.2.1.3 |
genEquipInterfacesServicesPWTDMPortsChannelizationTIndication whether this TDM port is channelized into DS0s.rw EnableDisable .1.3.6.1.4.1.2281.10.9.7.2.1.4 |
genEquipInterfacesServicesPWTDMPortsTimingModeTransmission towards TDM timing mode.
Loop means transmitting with the received clock from TDM signal.
Absolute means transmitting with the clock selected by ClockSourceRef.
ClockRecovery means adaptive clock recovery mode.rw Enumeration .1.3.6.1.4.1.2281.10.9.7.2.1.5 |
genEquipInterfacesServicesPWTDMPortsClockSourceRefClock source reference for Absolute clock mode.
'none' for loop or clock-recovery timing modes.rw Enumeration .1.3.6.1.4.1.2281.10.9.7.2.1.6 |
genEquipInterfacesServicesPWTDMPortsClkSrcRefPortTDM port serving as a clock reference for loop or clock-recovery timing modesrw INTEGER .1.3.6.1.4.1.2281.10.9.7.2.1.7 |
genEquipInterfacesServicesPWTDMPortsClkSrcPWIdPW ID (as defined in genEquipServicesPWServicePWId) from which clock will be derived
for this port when TimingMode is ClockRecovery.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.2.1.8 |
genEquipInterfacesServicesPWTDMPortsLoopbackEnable or Disable line loopback on the E1/T1 interface.rw Enumeration .1.3.6.1.4.1.2281.10.9.7.2.1.9 |
genEquipInterfacesServicesPWTDMPortsTimeoutLine loopback timeout, in minutes. 0 means no timer.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.2.1.10 |
genEquipInterfacesServicesPWTDMPortsIdleCodeValue to be transmitted on this TDM port in unused timeslots.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.2.1.11 |
genEquipInterfacesServicesPWTDMPortsCounterLoopback time left (in seconds).ro INTEGER .1.3.6.1.4.1.2281.10.9.7.2.1.12 |
genEquipInterfacesServicesPWTDMPortsLineStatusLine status of this TDM port.ro Enumeration .1.3.6.1.4.1.2281.10.9.7.2.1.13 |
genEquipInterfacesNGPW OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.7.3 |
genEquipInterfacesNGPWCardTableThis table allows configuration of PW-LIC card level parameters. SEQUENCE OF GenEquipInterfacesNGPWCardEntry .1.3.6.1.4.1.2281.10.9.7.3.1 |
genEquipInterfacesNGPWCardEntryThis table entry allows configuration of PW-LIC card level parameters. GenEquipInterfacesNGPWCardEntry .1.3.6.1.4.1.2281.10.9.7.3.1.1 |
genEquipInterfacesNGPWCardSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.9.7.3.1.1.1 |
genEquipInterfacesNGPWCardExportClkSysRefConfigures which clock the PW-LIC exports towards the system.rw PWCclockSysRef .1.3.6.1.4.1.2281.10.9.7.3.1.1.2 |
genEquipInterfacesNGPWCardExportClkSysRefCrPortTDM port serving as clock recovery reference towards the system.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.3.1.1.3 |
genEquipInterfacesNGPWCardIPAddressIP Address for UDP/IP and MPLS encapsulations.rw IpAddress .1.3.6.1.4.1.2281.10.9.7.3.1.1.4 |
genEquipInterfacesNGPWCardIPSubnetMaskIP subnet mask for UDP/IP and MPLS encapsulations.rw IpAddress .1.3.6.1.4.1.2281.10.9.7.3.1.1.5 |
genEquipInterfacesNGPWCardClkRecoveryModeSets the card either in ACR or differential clock recovery mode.rw Enumeration .1.3.6.1.4.1.2281.10.9.7.3.1.1.6 |
genEquipInterfacesNGPWCardDifferentialClkSourceReference clock source for differential clock recovery (none for adaptive).rw PWCDiffClockSrc .1.3.6.1.4.1.2281.10.9.7.3.1.1.7 |
genEquipInterfacesNGPWCardClockFreqFrequency for differential clock (none for adaptive).rw Enumeration .1.3.6.1.4.1.2281.10.9.7.3.1.1.8 |
genEquipInterfacesNGPWCardTDMTypeType of TDM interfaces (E1, DS1).rw Enumeration .1.3.6.1.4.1.2281.10.9.7.3.1.1.9 |
genEquipInterfacesNGPWCardLoopbackTimeoutTimeout for TDM ports loopback.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.3.1.1.10 |
genEquipInterfacesNGPWClockInterfaceTableThis table allows configuration of the front panel clock interface in the PW-LIC. SEQUENCE OF GenEquipInterfacesNGPWClockInterfaceEntry .1.3.6.1.4.1.2281.10.9.7.3.3 |
genEquipInterfacesNGPWClockInterfaceEntryThis table entry allows configuration of the front panel clock interface in the PW-LIC. GenEquipInterfacesNGPWClockInterfaceEntry .1.3.6.1.4.1.2281.10.9.7.3.3.1 |
genEquipInterfacesNGPWClockInterfaceSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.9.7.3.3.1.1 |
genEquipInterfacesNGPWClockInterfaceIfIndexInterface IfIndex.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.3.3.1.2 |
genEquipInterfacesNGPWClockInterfaceAdminRxClock interface administrative state.ro EnableDisableSMI2 .1.3.6.1.4.1.2281.10.9.7.3.3.1.3 |
genEquipInterfacesNGPWClockInterfaceAdminTxClock interface administrative state.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.9.7.3.3.1.4 |
genEquipInterfacesNGPWClockInterfaceExportClkFrontPannelConfigures which signal the PW-LIC exports to the front panel clock interface.rw Enumeration .1.3.6.1.4.1.2281.10.9.7.3.3.1.5 |
genEquipInterfacesNGPWClockInterfaceExportClkFrontPanelCrPortTDM port serving as clock recovery reference for front panel interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.3.3.1.6 |
genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalInputExpected input signal type: E1 or differential sine/square 3.3V 2MHzrw PWfpClockSignal .1.3.6.1.4.1.2281.10.9.7.3.3.1.7 |
genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalOutputOutput signal type: E1 or differential sine/square 3.3V 2MH.rw PWfpClockSignal .1.3.6.1.4.1.2281.10.9.7.3.3.1.8 |
genEquipInterfacesNGPWClockInterfaceSSMAdminEnable/disable SSM sending in this interface.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.9.7.3.3.1.9 |
genEquipInterfacesNGPWClockInterfaceSSMBitDetermines which bit in the frame.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.3.3.1.10 |
genEquipInterfacesNGPWClockInterfaceSSMTxDefault...rw INTEGER .1.3.6.1.4.1.2281.10.9.7.3.3.1.11 |
genEquipInterfacesNGPWClockInterfaceStatusTableThis table contains information about current state of the clock interface in the PW-LIC. SEQUENCE OF GenEquipInterfacesNGPWClockInterfaceStatusEntry .1.3.6.1.4.1.2281.10.9.7.3.4 |
genEquipInterfacesNGPWClockInterfaceStatusEntryThis table entry contains information about current state of the clock interface in the PW-LIC. GenEquipInterfacesNGPWClockInterfaceStatusEntry .1.3.6.1.4.1.2281.10.9.7.3.4.1 |
genEquipInterfacesNGPWClockInterfaceStatusSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.9.7.3.4.1.1 |
genEquipInterfacesNGPWClockInterfaceStatusIfIndexInterface IfIndex.ro INTEGER .1.3.6.1.4.1.2281.10.9.7.3.4.1.2 |
genEquipInterfacesNGPWClockInterfaceStatusOperationalStateClock interface operational state.ro DownUp .1.3.6.1.4.1.2281.10.9.7.3.4.1.3 |
genEquipInterfacesNGPWClockInterfaceStatusSSMTxCurrently transmitted SSM bits.ro INTEGER .1.3.6.1.4.1.2281.10.9.7.3.4.1.4 |
genEquipInterfacesNGPWClockInterfaceStatusSSMRxCurrently received SSM bits.ro INTEGER .1.3.6.1.4.1.2281.10.9.7.3.4.1.5 |
genEquipInterfacesNGPWEthInterfaceTableThis table allows enabling/disabling the PW-LIC internal Ethernet port. SEQUENCE OF GenEquipInterfacesNGPWEthInterfaceEntry .1.3.6.1.4.1.2281.10.9.7.3.5 |
genEquipInterfacesNGPWEthInterfaceEntryThis table allows enabling/disabling the PW-LIC internal Ethernet port. GenEquipInterfacesNGPWEthInterfaceEntry .1.3.6.1.4.1.2281.10.9.7.3.5.1 |
genEquipInterfacesNGPWEthInterfaceSlotIDSlot where PW-LIC is inserted.rw INTEGER .1.3.6.1.4.1.2281.10.9.7.3.5.1.1 |
genEquipInterfacesNGPWEthInterfaceIfIndexInterface IfIndex.ro INTEGER .1.3.6.1.4.1.2281.10.9.7.3.5.1.2 |
genEquipInterfacesNGPWEthInterfaceStatusTableThis table contains status and RMON statistics of the internal PW-LIC Ethernet port. SEQUENCE OF GenEquipInterfacesNGPWEthInterfaceStatusEntry .1.3.6.1.4.1.2281.10.9.7.3.6 |
genEquipInterfacesNGPWEthInterfaceStatusEntryThis table enatry contains status and RMON statistics of the internal PW-LIC Ethernet port. GenEquipInterfacesNGPWEthInterfaceStatusEntry .1.3.6.1.4.1.2281.10.9.7.3.6.1 |
genEquipInterfacesNGPWEthInterfaceStatusIfIndexInterface IfIndex.ro INTEGER .1.3.6.1.4.1.2281.10.9.7.3.6.1.2 |
genEquipInterfacesNGPWEthInterfaceStatusMACAddressMAC Address to be used in Ethernet and UDP/IP PSN packetsro OCTET STRING .1.3.6.1.4.1.2281.10.9.7.3.6.1.3 |
genEquipInterfacesNGPWEthInterfaceStatusClearStatsClears internal Ethernet port RMON countersrw NoYes .1.3.6.1.4.1.2281.10.9.7.3.6.1.4 |
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames64Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 64 bytes in length inclusivero Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.5 |
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames127Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 65 to 127 bytes in length inclusive.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.6 |
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames255Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 128 to 255 bytes in length inclusive.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.7 |
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames511Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 256 to 511 bytes in length inclusive.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.8 |
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1023Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 512 to 1023 bytes in length inclusive.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.9 |
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1518Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1024 to 1518 bytes in length inclusive.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.10 |
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1522Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1519 to 1522 bytes in length inclusive.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.11 |
genEquipInterfacesNGPWEthInterfaceStatusRxBytesUnsigned 64-bit modulo counter of byte count of frames received with 0 to 1518 bytes, including those in bad packets.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.12 |
genEquipInterfacesNGPWEthInterfaceStatusRxPacketsUnsigned 64-bit modulo counter of number of received packets (including bad packets, all Unicast, Broadcast, and Multicast packets).ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.13 |
genEquipInterfacesNGPWEthInterfaceStatusRxErrFcsUnsigned 64-bit modulo counter of frames received that have a integral 64 to 1518 byte length and contain a Frame Check Sequence error..ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.14 |
genEquipInterfacesNGPWEthInterfaceStatusRxMulticastUnsigned 64-bit modulo counter of number of multicast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.15 |
genEquipInterfacesNGPWEthInterfaceStatusRxBroadcastUnsigned 64-bit modulo counter of number of broadcast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.16 |
genEquipInterfacesNGPWEthInterfaceStatusRxMacControlUnsigned 64-bit modulo counter of MAC Control frames received (PAUSE &Unsupported).ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.17 |
genEquipInterfacesNGPWEthInterfaceStatusRxMacPauseUnsigned 64-bit modulo counter of valid PAUSE MAC Control frames received.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.18 |
genEquipInterfacesNGPWEthInterfaceStatusRxMacUnknownUnsigned 64-bit modulo counter of MAC Control Frames received that contain an opcode other than a PAUSE.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.19 |
genEquipInterfacesNGPWEthInterfaceStatusRxErrCodeUnsigned 64-bit modulo counter of number of instances where a valid carrier was present and at least one invalid data symbol was detected.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.20 |
genEquipInterfacesNGPWEthInterfaceStatusRxErrFalseCarrierUnsigned 64-bit modulo counter of number of false carriers detected during idle, as defined by a 1 on RX_ER and an '0xE' on RXD.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.21 |
genEquipInterfacesNGPWEthInterfaceStatusRxUndersizeUnsigned 64-bit modulo counter of frames received that are less than 64 bytes in length, contain a valid FCS, and were otherwise well formed.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.22 |
genEquipInterfacesNGPWEthInterfaceStatusRxOversizeUnsigned 64-bit modulo counter of frames received that exceeded maximum bytes in length, contain a valid FCS, and were otherwise well formed.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.23 |
genEquipInterfacesNGPWEthInterfaceStatusRxFragmentsUnsigned 64-bit modulo counter of frames received which are less than 64 bytes in length and contain an invalid FCS.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.24 |
genEquipInterfacesNGPWEthInterfaceStatusRxJabberUnsigned 64-bit modulo counter of frames received which exceed maximum length and contain an invalid FCS, including alignment errors.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.25 |
genEquipInterfacesNGPWEthInterfaceStatusRxDroppedUnsigned 64-bit modulo counter of frames received that are streamed to the system but are later dropped due to lack of system resources.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.26 |
genEquipInterfacesNGPWEthInterfaceStatusTxBytesUnsigned 64-bit modulo counter of number of bytes that were put on the wire including fragments of frames that were involved with collisions.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.27 |
genEquipInterfacesNGPWEthInterfaceStatusTxPacketsUnsigned 64-bit modulo counter of transmitted packets.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.28 |
genEquipInterfacesNGPWEthInterfaceStatusTxMulticastUnsigned 64-bit modulo counter of Multicast valid frames transmitted (excluding Broadcast frames).ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.29 |
genEquipInterfacesNGPWEthInterfaceStatusTxBroadcastUnsigned 64-bit modulo counter of Broadcast frames transmitted (excluding Multicast frames).ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.30 |
genEquipInterfacesNGPWEthInterfaceStatusTxMacPauseUnsigned 64-bit modulo counter of valid PAUSE MAC Control frames transmitted.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.31 |
genEquipInterfacesNGPWEthInterfaceStatusTxDeferUnsigned 64-bit modulo counter of frames that were deferred upon first transmission attempt. Does not include frames involved in collisions..ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.32 |
genEquipInterfacesNGPWEthInterfaceStatusTxExcessDeferUnsigned 64-bit modulo counter of number of frames aborted that were deferred for an excessive period of time (3036 byte times).ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.33 |
genEquipInterfacesNGPWEthInterfaceStatusTxSingleCollisionUnsigned 64-bit modulo counter of frames transmitted which experienced exactly one collision during transmission.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.34 |
genEquipInterfacesNGPWEthInterfaceStatusTxMultiCollisionUnsigned 64-bit modulo counter of frames transmitted which experienced 2-15 collisions.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.35 |
genEquipInterfacesNGPWEthInterfaceStatusTxLateCollisionUnsigned 64-bit modulo counter of frames transmitted that experienced a late collision during a transmission attempt.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.36 |
genEquipInterfacesNGPWEthInterfaceStatusTxExcessCollisionUnsigned 64-bit modulo counter of frames that experienced 16 collisions during transmission and were aborted.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.37 |
genEquipInterfacesNGPWEthInterfaceStatusTxNoCollisionUnsigned 64-bit modulo counter of number of frames transmitted that had no collision.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.38 |
genEquipInterfacesNGPWEthInterfaceStatusTxMacPauseHonoredUnsigned 64-bit modulo counter of number of times a valid PAUSE MAC Control frame was transmitted and honored.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.39 |
genEquipInterfacesNGPWEthInterfaceStatusTxDroppedUnsigned 64-bit modulo counter of number of times the input PFH is asserted.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.40 |
genEquipInterfacesNGPWEthInterfaceStatusTxJabberUnsigned 64-bit modulo counter of oversized transmitted frames with an incorrect FCS value.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.41 |
genEquipInterfacesNGPWEthInterfaceStatusTxErrFcsUnsigned 64-bit modulo counter of valid sized packets transmitted with an incorrec tFCS value.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.42 |
genEquipInterfacesNGPWEthInterfaceStatusTxControlUnsigned 64-bit modulo counter of valid size frames transmitted with a Type Field signifying a Control frame..ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.43 |
genEquipInterfacesNGPWEthInterfaceStatusTxOversizeUnsigned 64-bit modulo counter of oversized transmitted frames with a correct.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.44 |
genEquipInterfacesNGPWEthInterfaceStatusTxUndersizeUnsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with a correctFCS value.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.45 |
genEquipInterfacesNGPWEthInterfaceStatusTxFragmentsUnsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with an incorrect FCS value.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.46 |
genEquipInterfacesNGPWEthInterfaceStatusRxIwFramesUnsigned 64-bit modulo counter of the number of received Ethernet Interworking frames that were received and sent to the L3 Interworking module.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.47 |
genEquipInterfacesNGPWEthInterfaceStatusRxErrFbpUnderrunUnsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due free buffer pool (FBP) Overrun.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.48 |
genEquipInterfacesNGPWEthInterfaceStatusRxErrNonvalidMacUnsigned 64-bit modulo counter of the number of received Ethernet frames whose MAC-DA is not valid.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.49 |
genEquipInterfacesNGPWEthInterfaceStatusRxErrMruUnsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due the Maximum Receive Unit.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.50 |
genEquipInterfacesNGPWEthInterfaceStatusRxErrSduUnsigned 64-bit modulo counter of the number of Ethernet frames which were closed due the maximum frame size has been exceeded.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.51 |
genEquipInterfacesNGPWEthInterfaceStatusTxErrUnderrunUnsigned 64-bit modulo counter of number of times Ethernet transmitter underun occurred.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.52 |
genEquipInterfacesNGPWEthInterfaceStatusRxErrOverrunUnsigned 64-bit modulo counter of number of received Ethernet frames which were closed or discarded due to a receive buffer overrun event.ro Counter64 .1.3.6.1.4.1.2281.10.9.7.3.6.1.53 |
genEquipInterfacesNGPWEthInterfaceStatusSlotIDSlot where PW-LIC is insertedro INTEGER .1.3.6.1.4.1.2281.10.9.7.3.6.1.54 |
genEquipInterfacesNGPWCardStatusTableThis table contains information about PW-LIC card level status. SEQUENCE OF GenEquipInterfacesNGPWCardStatusEntry .1.3.6.1.4.1.2281.10.9.7.3.7 |
genEquipInterfacesNGPWCardStatusEntryThis table contains information about PW-LIC card level status. GenEquipInterfacesNGPWCardStatusEntry .1.3.6.1.4.1.2281.10.9.7.3.7.1 |
genEquipInterfacesNGPWCardStatusSlotIDSlot where PW-LIC is inserted.ro INTEGER .1.3.6.1.4.1.2281.10.9.7.3.7.1.1 |
genEquipInterfacesNGPWCardStatusSWVersionBundle ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.7.3.7.1.2 |
genEquipInterfacesCet OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.8 |
genEquipInterfacesCetGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.8.1 |
genEquipInterfacesCetMruMaximum Frame Size.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.1.1 |
genEquipInterfacesCetPhyConfigTableEthernet physical port configuration table. SEQUENCE OF GenEquipInterfacesCetPhyConfigEntry .1.3.6.1.4.1.2281.10.9.8.2 |
genEquipInterfacesCetPhyConfigEntryEthernet physical port configuration table entry. GenEquipInterfacesCetPhyConfigEntry .1.3.6.1.4.1.2281.10.9.8.2.1 |
genEquipInterfacesCetPhyConfigIfIndexEthernet physical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.2.1.1 |
genEquipInterfacesCetPhyConfigDescriptionSetting Ethernet physical port user description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.8.2.1.2 |
genEquipInterfacesCetPhyConfigMediaTypeSetting Ethernet physical port media type.rw MediaType .1.3.6.1.4.1.2281.10.9.8.2.1.3 |
genEquipInterfacesCetPhyConfigAdminSetting Ethernet physical port administration.rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.2.1.4 |
genEquipInterfacesCetPhyConfigAutoNegotiationSetting Ethernet physical port auto negotiation state.rw AutoNegMode .1.3.6.1.4.1.2281.10.9.8.2.1.5 |
genEquipInterfacesCetPhyConfigSpeedSetting Ethernet physical maximum port speed Affects Auto Neg Capability Advertised Bits.rw SpeedDefs .1.3.6.1.4.1.2281.10.9.8.2.1.6 |
genEquipInterfacesCetPhyConfigDuplexSetting Ethernet physical port duplex Affects Auto Neg Capability Advertised Bits.rw HalfFull .1.3.6.1.4.1.2281.10.9.8.2.1.7 |
genEquipInterfacesCetPhyConfigMasterSlaveSetting Ethernet physical port master slave for 1000BaseT Affects Auto Neg
Capability Advertised Bits.rw MasterSalveSetMode .1.3.6.1.4.1.2281.10.9.8.2.1.8 |
genEquipInterfacesCetPhyConfigIfgInter Frame GAP value in bytes.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.2.1.10 |
genEquipInterfacesCetPhyConfigPreambleport preamble value in bytes.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.2.1.11 |
genEquipInterfacesCetPhyConfigMacAddressEthernet physical port mac-address.rw OCTET STRING .1.3.6.1.4.1.2281.10.9.8.2.1.12 |
genEquipInterfacesCetPhyConfigTypeSetting Ethernet physical port type.rw PortType .1.3.6.1.4.1.2281.10.9.8.2.1.13 |
genEquipInterfacesCetPhyConfigPortPmAdminEnable/Disable PMs on port level.rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.2.1.14 |
genEquipInterfacesCetPhyConfigPortPmRxBytesThresholdThreshold of received bytes PM.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.2.1.15 |
genEquipInterfacesCetPhyConfigPortPmTxBytesThresholdThreshold of transmitted bytes PM.rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.2.1.16 |
genEquipInterfacesCetPhyStatusTableEthernet physical port configuration table. SEQUENCE OF GenEquipInterfacesCetPhyStatusEntry .1.3.6.1.4.1.2281.10.9.8.3 |
genEquipInterfacesCetPhyStatusEntryThis table allows configuration of the 16 internal E1/DS1 ports. GenEquipInterfacesCetPhyStatusEntry .1.3.6.1.4.1.2281.10.9.8.3.1 |
genEquipInterfacesCetPhyStatusIfIndexEthernet physical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.3.1.1 |
genEquipInterfacesCetPhyStatusMediaTypeSetting Ethernet physical port media type.ro MediaType .1.3.6.1.4.1.2281.10.9.8.3.1.2 |
genEquipInterfacesCetPhyStatusOperationalStatusEthernet physical port operational-status.ro DownUp .1.3.6.1.4.1.2281.10.9.8.3.1.3 |
genEquipInterfacesCetPhystatusAutoNegotiationEthernet physical port auto negotiation status.ro AutoNegMode .1.3.6.1.4.1.2281.10.9.8.3.1.4 |
genEquipInterfacesCetPhyStatusSpeedActual Ethernet physical port speed.ro SpeedDefs .1.3.6.1.4.1.2281.10.9.8.3.1.5 |
genEquipInterfacesCetPhyStatusDuplexActual Ethernet physical port duplex.ro HalfFull .1.3.6.1.4.1.2281.10.9.8.3.1.6 |
genEquipInterfacesCetPhyStatusMasterSlaveActual Ethernet physical port master slave for 1000BaseT.ro MasterSalveSetMode .1.3.6.1.4.1.2281.10.9.8.3.1.7 |
genEquipInterfacesCetLogicConfigTableThe table holds the ingress logical port configuration (it is the same point of view for
single interface or group of ports) . SEQUENCE OF GenEquipInterfacesCetLogicConfigEntry .1.3.6.1.4.1.2281.10.9.8.4 |
genEquipInterfacesCetLogicConfigEntryThe table entry holds the ingress logical port configuration (it is the same point of
view for single interface or group of ports). GenEquipInterfacesCetLogicConfigEntry .1.3.6.1.4.1.2281.10.9.8.4.1 |
genEquipInterfacesCetLogicConfigIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.4.1.1 |
genEquipInterfacesCetLogicConfigTrafficFlowControl the the traffic via logical port which is connected to physical interface
(in case of group it control the all interfaces of the group).rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.4.1.2 |
genEquipInterfacesCetLogicConfigEdgePortPort Edge Mode (edge / non-edge).rw EdgePortType .1.3.6.1.4.1.2281.10.9.8.4.1.3 |
genEquipInterfacesCetLogicConfigIngressTcamClassificationingress-tcam-classification.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.4.1.4 |
genEquipInterfacesCetLogicConfigDefaultVlanTagDefault Network Vlan ID.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.4.1.5 |
genEquipInterfacesCetLogicConfigInLineCompensationEthernet Layer 1 Ingress Byte Compensation.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.4.1.6 |
genEquipInterfacesCetLogicConfigOutLineCompensationEthernet Layer 1 Egress Byte Compensation from the specific logical port.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.4.1.7 |
genEquipInterfacesCetLogicConfigPclId....ro INTEGER .1.3.6.1.4.1.2281.10.9.8.4.1.8 |
genEquipInterfacesCetLogicConfigDefCosPort Default CoS.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.4.1.9 |
genEquipInterfacesCetLogicConfigVlanUpToCosTrustModeTrust VLAN UP bits for classification from the specific logical port.rw TrustMode .1.3.6.1.4.1.2281.10.9.8.4.1.10 |
genEquipInterfacesCetLogicConfigDscpToCosTrustModeTrust DSCP for classification from the specific logical port.rw TrustMode .1.3.6.1.4.1.2281.10.9.8.4.1.11 |
genEquipInterfacesCetLogicConfigMplsExpToCosTrustModeTrust MPLS EXP bits for classification from the specific logical port.rw TrustMode .1.3.6.1.4.1.2281.10.9.8.4.1.12 |
genEquipInterfacesCetLogicConfigMacAddressEthernet logical port mac-address.ro OCTET STRING .1.3.6.1.4.1.2281.10.9.8.4.1.13 |
genEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdminSwap MAC address for Ethernet port loopback.rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.4.1.14 |
genEquipInterfacesCetLogicConfigLoopbackAdminEthernet loopback admin.rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.4.1.15 |
genEquipInterfacesCetLogicConfigLoopbackDurationEthernet loopback duration. Allowed values 1 to 9000 seconds.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.4.1.16 |
genEquipInterfacesCetLogicStatusTableThe table holds the ingress logical port status
(it is the same point of view for single interface or group of ports). SEQUENCE OF GenEquipInterfacesCetLogicStatusEntry .1.3.6.1.4.1.2281.10.9.8.5 |
genEquipInterfacesCetLogicStatusEntryThe table entry holds the ingress logical port status
(it is the same point of view for single interface or group of ports). GenEquipInterfacesCetLogicStatusEntry .1.3.6.1.4.1.2281.10.9.8.5.1 |
genEquipInterfacesCetLogicStatusIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.5.1.1 |
genEquipInterfacesCetLogicStatusOperationalStatusEthernet logical port operational-status (Up or Down).ro DownUp .1.3.6.1.4.1.2281.10.9.8.5.1.2 |
genEquipInterfacesCetBcastPolicerAssociationTableEthernet Port Broadcast configuration table. SEQUENCE OF GenEquipInterfacesCetBcastPolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.6 |
genEquipInterfacesCetBcastPolicerAssociationEntryEthernet Port Broadcast configuration table entry. GenEquipInterfacesCetBcastPolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.6.1 |
genEquipInterfacesCetBcastPolicerAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.6.1.1 |
genEquipInterfacesCetBcastPolicerAssociationAssociatedProfileIdPolicer Profile.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.6.1.2 |
genEquipInterfacesCetBcastPolicerAssociationAssociationAdminBroadcast Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.6.1.3 |
genEquipInterfacesCetBcastPolicerAssociationAssociationRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.8.6.1.30 |
genEquipInterfacesCetEtype1PolicerAssociationTableEthernet Policing of user configuration ethertype type 1 (at port level) table. SEQUENCE OF GenEquipInterfacesCetEtype1PolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.7 |
genEquipInterfacesCetEtype1PolicerAssociationEntryEthernet Policing of user configuration ethertype type 1 (at port level) table entry. GenEquipInterfacesCetEtype1PolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.7.1 |
genEquipInterfacesCetEtype1PolicerAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.7.1.1 |
genEquipInterfacesCetEtype1PolicerAssociationProfileIdIngress Policer Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.7.1.2 |
genEquipInterfacesCetEtype1PolicerAssociationEthertypeEthernet Ethertype 1 user configuration value.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.7.1.3 |
genEquipInterfacesCetEtype1PolicerAssociationAdminIngress Ethertype 1 Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.7.1.4 |
genEquipInterfacesCetEtype1PolicerAssociationRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.8.7.1.30 |
genEquipInterfacesCetEtype2PolicerAssociationTableEthernet Policing of user configuration ethertype type 2 (at port level) table. SEQUENCE OF GenEquipInterfacesCetEtype2PolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.8 |
genEquipInterfacesCetEtype2PolicerAssociationEntryEthernet Policing of user configuration ethertype type 2 (at port level) table. GenEquipInterfacesCetEtype2PolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.8.1 |
genEquipInterfacesCetEtype2PolicerAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.8.1.1 |
genEquipInterfacesCetEtype2PolicerAssociationAssociatedProfileIdIngress Policer Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.8.1.2 |
genEquipInterfacesCetEtype2PolicerAssociationEthertypeEthernet Ethertype 2 user configuration value.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.8.1.3 |
genEquipInterfacesCetEtype2PolicerAssociationAdminIngress Ethertype 2 Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.8.1.4 |
genEquipInterfacesCetEtype2PolicerAssociationRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.8.8.1.30 |
genEquipInterfacesCetEtype3PolicerAssociationTableEthernet Policing of user configuration ethertype type 3 (at port level) table. SEQUENCE OF GenEquipInterfacesCetEtype3PolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.9 |
genEquipInterfacesCetEtype3PolicerAssociationEntryEthernet Policing of user configuration ethertype type 3 (at port level) table entry. GenEquipInterfacesCetEtype3PolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.9.1 |
genEquipInterfacesCetEtype3PolicerAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.9.1.1 |
genEquipInterfacesCetEtype3PolicerAssociationAssociatedProfileIdIngress Policer Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.9.1.2 |
genEquipInterfacesCetEtype3PolicerAssociationEthertypeEthernet Ethertype 3 user configuration value.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.9.1.3 |
genEquipInterfacesCetEtype3PolicerAssociationAdminIngress Ethertype 3 Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.9.1.4 |
genEquipInterfacesCetEtype3PolicerAssociationRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.8.9.1.30 |
genEquipInterfacesCetMcastPolicerAssociationTableEthernet Port Multicast configuration table. SEQUENCE OF GenEquipInterfacesCetMcastPolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.10 |
genEquipInterfacesCetMcastPolicerAssociationEntryEthernet Port Multicast configuration table. GenEquipInterfacesCetMcastPolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.10.1 |
genEquipInterfacesCetMcastPolicerAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.10.1.1 |
genEquipInterfacesCetMcastPolicerAssociationAssociatedProfileIdIngress Policer Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.10.1.2 |
genEquipInterfacesCetMcastPolicerAssociationAdminIngress Multicast Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.10.1.3 |
genEquipInterfacesCetMcastPolicerAssociationAssociationRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.8.10.1.30 |
genEquipInterfacesCetUcastPolicerAssociationTableEthernet Port Multicast configuration table. SEQUENCE OF GenEquipInterfacesCetUcastPolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.11 |
genEquipInterfacesCetUcastPolicerAssociationEntryEthernet Port Multicast configuration table. GenEquipInterfacesCetUcastPolicerAssociationEntry .1.3.6.1.4.1.2281.10.9.8.11.1 |
genEquipInterfacesCetUcastPolicerAssociationIfIndexEthernet Logical port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.11.1.1 |
genEquipInterfacesCetUcastPolicerAssociationAssociatedProfileIdIngress Policer Profile ID.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.11.1.2 |
genEquipInterfacesCetUcastPolicerAssociationAdminIngress Unicast Policer Admin (enable / disable).rw EnableDisable .1.3.6.1.4.1.2281.10.9.8.11.1.3 |
genEquipInterfacesCetUcastPolicerAssociationRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.8.11.1.30 |
genEquipInterfacesCetLagTableThis table holds the members of a Link Aggregation Group. SEQUENCE OF GenEquipInterfacesCetLagEntry .1.3.6.1.4.1.2281.10.9.8.12 |
genEquipInterfacesCetLagEntryThis table holds the members of a Link Aggregation Group entry. GenEquipInterfacesCetLagEntry .1.3.6.1.4.1.2281.10.9.8.12.1 |
genEquipInterfacesCetLagIfIndexLink aggregation group IF index.ro INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.1 |
genEquipInterfacesCetLagMember1IfIndexLink aggregation member 1 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.2 |
genEquipInterfacesCetLagMember2IfIndexLink aggregation member 2 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.3 |
genEquipInterfacesCetLagMember3IfIndexLink aggregation member 3 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.4 |
genEquipInterfacesCetLagMember4IfIndexLink aggregation member 4 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.5 |
genEquipInterfacesCetLagMember5IfIndexLink aggregation member 5 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.6 |
genEquipInterfacesCetLagMember6IfIndexLink aggregation member 6 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.7 |
genEquipInterfacesCetLagMember7IfIndexLink aggregation member 7 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.8 |
genEquipInterfacesCetLagMember8IfIndexLink aggregation member 8 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.9 |
genEquipInterfacesCetLagMember9IfIndexLink aggregation member 9 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.10 |
genEquipInterfacesCetLagMember10IfIndexLink aggregation member 9 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.11 |
genEquipInterfacesCetLagMember11IfIndexLink aggregation member 11 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.12 |
genEquipInterfacesCetLagMember12IfIndexLink aggregation member 12 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.13 |
genEquipInterfacesCetLagMember13IfIndexLink aggregation member 13 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.14 |
genEquipInterfacesCetLagMember14IfIndexLink aggregation member 14 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.15 |
genEquipInterfacesCetLagMember15IfIndexLink aggregation member 15 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.16 |
genEquipInterfacesCetLagMember16IfIndexLink aggregation member 16 IF index.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.12.1.17 |
genEquipInterfacesCetLagRowStatusTable Mib Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.8.12.1.30 |
genEquipServicesCetConfigServiceToInstanceTableThis table is used for mapping xSTP instance number per service. SEQUENCE OF GenEquipServicesCetConfigServiceToInstanceEntry .1.3.6.1.4.1.2281.10.9.8.13 |
genEquipServicesCetConfigServiceToInstanceEntryThis table entry is used for mapping xSTP instance number per service. GenEquipServicesCetConfigServiceToInstanceEntry .1.3.6.1.4.1.2281.10.9.8.13.1 |
genEquipServicesCetConfigServiceToInstanceServiceIndexService ID.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.13.1.1 |
genEquipServicesCetConfigServiceToInstanceInstanceIndexxSTP Instance ID for the specific Service.rw INTEGER .1.3.6.1.4.1.2281.10.9.8.13.1.2 |
genEquipInterfacesIfManager OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.9 |
genEquipInterfacesIfManagerTableThis table contains a list of configuration information about the user managed interfaces. SEQUENCE OF GenEquipInterfacesIfManagerEntry .1.3.6.1.4.1.2281.10.9.9.1 |
genEquipInterfacesIfManagerEntryThis table entry contains a list of configuration information about the user managed interfaces. GenEquipInterfacesIfManagerEntry .1.3.6.1.4.1.2281.10.9.9.1.1 |
genEquipInterfacesIfManagerifCascadingThe cascading state of the interface.ro IfMgrTrueFalse .1.3.6.1.4.1.2281.10.9.9.1.1.1 |
genEquipInterfacesIfManagerifSecondaryOperStatusAn additional information about the current operational state of the interface.ro INTEGER .1.3.6.1.4.1.2281.10.9.9.1.1.2 |
genEquipInterfacesCascading OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.10 |
genEquipInterfacesCascadingConfigurationTableCascading Port Configuration Table. SEQUENCE OF GenEquipInterfacesCascadingConfigurationEntry .1.3.6.1.4.1.2281.10.9.10.1 |
genEquipInterfacesCascadingConfigurationEntryCascading Port Configuration Table entry. GenEquipInterfacesCascadingConfigurationEntry .1.3.6.1.4.1.2281.10.9.10.1.1 |
genEquipInterfacesCascadingConfigurationIfindexCascading port if-index table key.ro INTEGER .1.3.6.1.4.1.2281.10.9.10.1.1.1 |
genEquipInterfacesCascadingConfigurationCascadingIndicates if the port is cascading or not.rw MibTrueFalse .1.3.6.1.4.1.2281.10.9.10.1.1.2 |
genEquipInterfacesStm1Rst OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.9.11 |
genEquipInterfacesStm1RstConfigTableSTM-1/OC-3 configuration table. SEQUENCE OF GenEquipInterfacesStm1RstConfigEntry .1.3.6.1.4.1.2281.10.9.11.1 |
genEquipInterfacesStm1RstConfigEntrySTM-1/OC-3 configuration table entry. GenEquipInterfacesStm1RstConfigEntry .1.3.6.1.4.1.2281.10.9.11.1.1 |
genEquipInterfacesStm1RstConfigIfindexThe interface index of the STM-1/OC-3 interface.ro INTEGER .1.3.6.1.4.1.2281.10.9.11.1.1.1 |
genEquipInterfacesStm1RstConfigPortThe port of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.1.1.2 |
genEquipInterfacesStm1RstConfigAdminThe Admin Sate of the STM-1/OC-3 interface.rw EnableDisableSMI2 .1.3.6.1.4.1.2281.10.9.11.1.1.3 |
genEquipInterfacesStm1RstConfigMuteThe SFP Mute config of the STM-1/OC-3 interface.rw Enumeration .1.3.6.1.4.1.2281.10.9.11.1.1.4 |
genEquipInterfacesStm1RstStatusTableSTM-1/OC-3 status table. SEQUENCE OF GenEquipInterfacesStm1RstStatusEntry .1.3.6.1.4.1.2281.10.9.11.2 |
genEquipInterfacesStm1RstStatusEntrySTM-1/OC-3 status table entry. GenEquipInterfacesStm1RstStatusEntry .1.3.6.1.4.1.2281.10.9.11.2.1 |
genEquipInterfacesStm1RstStatusIfindexThe interface index of the STM-1/OC-3 interface.ro INTEGER .1.3.6.1.4.1.2281.10.9.11.2.1.1 |
genEquipInterfacesStm1RstStatusLoopbackTimerThe port of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.2.1.2 |
genEquipInterfacesStm1RstStatusLoopbackTypeThe loopback type of the STM-1/OC-3 interface.rw RSTLoopbackType .1.3.6.1.4.1.2281.10.9.11.2.1.3 |
genEquipInterfacesStm1RstStatusOperstatusThe operational status of the STM-1/OC-3 interface.ro DownUp .1.3.6.1.4.1.2281.10.9.11.2.1.4 |
genEquipInterfacesStm1RstPrbsTableSTM-1/OC-3 status table. SEQUENCE OF GenEquipInterfacesStm1RstPrbsEntry .1.3.6.1.4.1.2281.10.9.11.3 |
genEquipInterfacesStm1RstPrbsEntrySTM-1/OC-3 status table entry. GenEquipInterfacesStm1RstPrbsEntry .1.3.6.1.4.1.2281.10.9.11.3.1 |
genEquipInterfacesStm1RstPrbsCheckLineClearThe PRBS Checker Line Direction Reset counter of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.1 |
genEquipInterfacesStm1RstPrbsCheckLineThe PRBS Checker Line Direction of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.2 |
genEquipInterfacesStm1RstPrbsCheckLineInvThe PRBS Checker Line Direction of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.3 |
genEquipInterfacesStm1RstPrbsCheckLineStatusThe PRBS Checker Line Direction Status of the STM-1/OC-3 interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.11.3.1.4 |
genEquipInterfacesStm1RstPrbsCheckLineTotErrThe PRBS Checker Line Direction Total Error counter of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.5 |
genEquipInterfacesStm1RstPrbsCheckRadioClearThe PRBS Checker Radio Direction Reset counter of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.6 |
genEquipInterfacesStm1RstPrbsCheckRadioThe PRBS Checker Radio Direction of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.7 |
genEquipInterfacesStm1RstPrbsCheckRadioInvThe PRBS Checker Radio Direction of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.8 |
genEquipInterfacesStm1RstPrbsCheckRadioStatusThe PRBS Checker Radio Direction Status of the STM-1/OC-3 interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.9.11.3.1.9 |
genEquipInterfacesStm1RstPrbsCheckRadioTotErrThe PRBS Checker Radio Direction Total Error counter of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.10 |
genEquipInterfacesStm1RstPrbsGenLineThe PRBS Generator Line Direction of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.11 |
genEquipInterfacesStm1RstPrbsGenLineErrInsThe PRBS Generator Line Direction Error Insert of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.12 |
genEquipInterfacesStm1RstPrbsGenLineInvThe PRBS Generator Line Direction of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.13 |
genEquipInterfacesStm1RstPrbsGenRadioThe PRBS Generator Radio Direction of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.14 |
genEquipInterfacesStm1RstPrbsGenRadioErrInsThe PRBS Generator Radio Direction Error Insert of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.15 |
genEquipInterfacesStm1RstPrbsGenRadioInvThe PRBS Generator Radio Direction of the STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.9.11.3.1.16 |
genTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2281.11 |
generalV3TrapGeneral network V3 trap NOTIFICATION-TYPE .1.3.6.1.4.1.2281.11.1 |
eventV3TrapEvent network V3 trap NOTIFICATION-TYPE .1.3.6.1.4.1.2281.11.2 |
heartbeatV3TrapHeartbeat v3 trap - The heartbeat trap, sent once per heartbeat period NOTIFICATION-TYPE .1.3.6.1.4.1.2281.11.3 |
eventv3TrapSTPSTP trap.
(1) The description field shows show the descriptions of the event
STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
Role: <Role>, State: <state>,
In addition to the general trap event var-binds, this trap also adds the STP parameters. NOTIFICATION-TYPE .1.3.6.1.4.1.2281.11.4 |
generalNGV3TrapNG General network V3 trap NOTIFICATION-TYPE .1.3.6.1.4.1.2281.11.2000 |
heartbeatNGV3TrapNG Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period NOTIFICATION-TYPE .1.3.6.1.4.1.2281.11.2001 |