MWRM-RADIO-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MWRM-RADIO-MIB.
500
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
500 total| Object Name |
|---|
microwave-radio OBJECT IDENTIFIER .1.3.6.1.4.1.2281 |
SNMPv2-TC Unknown .1.3.6.1.4.1.2281 |
genEquip OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10 |
genEquipUnit OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.1 |
genEquipRFU OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.5 |
genEquipRfuStatusTableThis table indicates the RFU Status Data. SEQUENCE OF GenEquipRfuStatusEntry .1.3.6.1.4.1.2281.10.5.1 |
genEquipRfuStatusEntryEntry containing the data of the RFU. GenEquipRfuStatusEntry .1.3.6.1.4.1.2281.10.5.1.1 |
genEquipRfuStatusIdThis value indicates an index of a specific RFUro RfuId .1.3.6.1.4.1.2281.10.5.1.1.1 |
genEquipRfuStatusRxLevelThis value indicates the RFU Receive Level Status.ro INTEGER (-199..0) .1.3.6.1.4.1.2281.10.5.1.1.2 |
genEquipRfuStatusTxLevelThis value indicates the RFU Transmit Level Status.ro INTEGER (-99..34) .1.3.6.1.4.1.2281.10.5.1.1.3 |
genEquipRfuStatusTemperatureThis value indicates the RFU temperature.
The value depends on the represented measurement system.
with genEquipUnitMeasurementSystem parameter.ro INTEGER .1.3.6.1.4.1.2281.10.5.1.1.4 |
genEquipRfuStatusRunningVersionThis value indicates the running SW version on the RFU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.1.1.5 |
genEquipRfuStatusRFUTypeThe different types of the supported RFUsro Enumeration .1.3.6.1.4.1.2281.10.5.1.1.6 |
genEquipRfuStatusRFUGradeThe grade of the RFUro RfuGrade .1.3.6.1.4.1.2281.10.5.1.1.7 |
genEquipRfuStatusTxRxFreqSeparationTx to Rx frequency separation (MHz),
For some RFUs the user cannot set the Tx and Rx frequencies separately (one of them affects the other one's value).ro INTEGER .1.3.6.1.4.1.2281.10.5.1.1.8 |
genEquipRfuStatusRFUModeIF combining parameter - The mode of the RFUro Enumeration .1.3.6.1.4.1.2281.10.5.1.1.9 |
genEquipRfuStatusRxLevelDiversityIF combining parameter - The Rx Diversity level (dBm)ro INTEGER (-199..0) .1.3.6.1.4.1.2281.10.5.1.1.10 |
genEquipRfuStatusRxLevelCombinedIF combining parameter - The Rx Combined level (dBm)ro INTEGER (-199..0) .1.3.6.1.4.1.2281.10.5.1.1.11 |
genEquipRfuStatusAutoDelayCalStatusIF combining parameter - the automatic delay calibration status.
Supported only for specific RFUs.ro Enumeration .1.3.6.1.4.1.2281.10.5.1.1.12 |
genEquipRfuStatusRFUSerialNumberRFU Serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.1.1.13 |
genEquipRfuStatusRFUPartNumberRFU Part number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.1.1.14 |
genEquipRfuStatusRFUmateCarrierThe returned value indicates the slot number of the 'copartner RFU-D carrier'.
The returned value will be '-1' when the RFU is not RFU-D, or if the
'copartner RFU-D' carrier is not found.ro INTEGER .1.3.6.1.4.1.2281.10.5.1.1.15 |
genEquipRfuStatusRFUMaxTxFreqThe maximum Tx frequency of the RFU that is allowed by the RFU.ro INTEGER .1.3.6.1.4.1.2281.10.5.1.1.16 |
genEquipRfuStatusRFUMinTxFreqThe minimum Tx frequency of the RFU that is allowed by the RFU.ro INTEGER .1.3.6.1.4.1.2281.10.5.1.1.17 |
genEquipRfuStatusRFUMaxRxFreqThe maximum Rx frequency of the RFU that is allowed by the RFU.ro INTEGER .1.3.6.1.4.1.2281.10.5.1.1.18 |
genEquipRfuStatusRFUMinRxFreqThe minimum Rx frequency of the RFU that is allowed by the RFU.ro INTEGER .1.3.6.1.4.1.2281.10.5.1.1.19 |
genEquipRfuStatusInstallationReturns 'all-indoor' or 'split' according to the RFU installation.ro Enumeration .1.3.6.1.4.1.2281.10.5.1.1.20 |
genEquipRfuStatusDataSciErrorsData Sci Errorsro INTEGER .1.3.6.1.4.1.2281.10.5.1.1.21 |
genEquipRfuStatusDeviceErrorStatus Device Errorro INTEGER .1.3.6.1.4.1.2281.10.5.1.1.22 |
genEquipRfuStatusBandThe Band of the RF-Module in GHzro Enumeration .1.3.6.1.4.1.2281.10.5.1.1.23 |
genEquipRfuStatusPATempThe measured temperature in celsius of the PA (Power Amplifier) of the RF modulero INTEGER .1.3.6.1.4.1.2281.10.5.1.1.24 |
genEquipRfuStatusTxMuteThe mute status, whether it is on (mute) or off (un-mute) of the RF-Modulero OffOn .1.3.6.1.4.1.2281.10.5.1.1.25 |
genEquipRfuStatusMinTxLevelThe minimum feasible TX signal level (TSL) in dBm of the RF-Modulero INTEGER .1.3.6.1.4.1.2281.10.5.1.1.26 |
genEquipRfuStatusMaxTxLevelThe maximum feasible TX signal level (TSL) in dBm of the RF-Modulero INTEGER .1.3.6.1.4.1.2281.10.5.1.1.27 |
genEquipRfuStatusMinBWThe minimum supported bandwidth in KHz of the RF-Modulero INTEGER .1.3.6.1.4.1.2281.10.5.1.1.28 |
genEquipRfuStatusMaxBWThe maximum supported bandwidth in KHz of the RF-Modulero INTEGER .1.3.6.1.4.1.2281.10.5.1.1.29 |
genEquipRfuStatusCommunicationThe communication status between the host and the RFUro DownUp .1.3.6.1.4.1.2281.10.5.1.1.30 |
genEquipRfuCfgATPCOverrideTimerStateReturns the state of the ATPC 'override timer', whether it is regular or expiredro Enumeration .1.3.6.1.4.1.2281.10.5.1.1.31 |
genEquipRfuStatusIfCombSupportIndicates if the IF-Combiner function is supportedro SupportedNotsupported .1.3.6.1.4.1.2281.10.5.1.1.32 |
genEquipRfuStatusMinRxLevelThe minimum feasible RX signal level (RSL) in dBm of the RF-Modulero INTEGER .1.3.6.1.4.1.2281.10.5.1.1.33 |
genEquipRfuStatusMaxRxLevelThe maximum feasible RX signal level (RSL) in dBm of the RF-Modulero INTEGER .1.3.6.1.4.1.2281.10.5.1.1.34 |
genEquipRfuCfgTableThis table indicates the RFU Configuration. SEQUENCE OF GenEquipRfuCfgEntry .1.3.6.1.4.1.2281.10.5.2 |
genEquipRfuCfgEntryThis table indicates the RFU Configuration. GenEquipRfuCfgEntry .1.3.6.1.4.1.2281.10.5.2.1 |
genEquipRfuCfgIdThis value indicates an index of a specific RFUro RfuId .1.3.6.1.4.1.2281.10.5.2.1.1 |
genEquipRfuCfgMaxTxLevelThis value indicates the RFU Maximum Transmit Level Configuration.rw INTEGER (-50..34) .1.3.6.1.4.1.2281.10.5.2.1.2 |
genEquipRfuCfgTxFreqTx Frequency configuration (Mhz)rw INTEGER .1.3.6.1.4.1.2281.10.5.2.1.3 |
genEquipRfuCfgRxFreqRx Frequency configuration (Mhz)rw INTEGER .1.3.6.1.4.1.2281.10.5.2.1.4 |
genEquipRfuCfgATPCAdminATPC configuration - Admin mode
Possible values:
- enable(2)
- disable(3)rw EnableDisable .1.3.6.1.4.1.2281.10.5.2.1.5 |
genEquipRfuCfgATPCRefRSLATPC configuration - reference RSL level (dBm)rw INTEGER (-70..-30) .1.3.6.1.4.1.2281.10.5.2.1.6 |
genEquipRfuCfgMuteTxThe required TX mute status of the RF-Modulerw MuteOnOff .1.3.6.1.4.1.2281.10.5.2.1.7 |
genEquipRfuCfgRSLConnSrcIF combining - RFU RSL (Received Signal Level) connector sourcerw Enumeration .1.3.6.1.4.1.2281.10.5.2.1.8 |
genEquipRfuCfgDelayCalIF combining - Delay calibrationrw INTEGER (-130..130) .1.3.6.1.4.1.2281.10.5.2.1.9 |
genEquipRfuCfgLoopbackRFU RF loopback commandrw Enumeration .1.3.6.1.4.1.2281.10.5.2.1.10 |
genEquipRfuCfgLogAdminRFU internal log file admin
Possible values:
- enable(2)
- disable(3)rw EnableDisable .1.3.6.1.4.1.2281.10.5.2.1.11 |
genEquipRfuCfgClearComDeviceErrorClear Com device Error.rw OffOn .1.3.6.1.4.1.2281.10.5.2.1.12 |
genEquipRfuCfgGreenModeAdminEnables/disables RFU green mode.
This mode will minimize power consumption while ensuring the highest transmission power
possible to get an RSL not higher than defined in the reference level genEquipRfuCfgGreenModeReferenceLevelrw EnableDisable .1.3.6.1.4.1.2281.10.5.2.1.13 |
genEquipRfuCfgGreenModeReferenceLevelRSL reference level (in dB) for green mode operationrw INTEGER (-70..-30) .1.3.6.1.4.1.2281.10.5.2.1.14 |
genEquipRfuCfgATPCOverrideTxLevelThis parameter configures the default transmission signal level in case of ATPC override due to expiration
of maximum power timer as defined in genEquipRfuCfgATPCOverrideTimeout.rw INTEGER (-50..34) .1.3.6.1.4.1.2281.10.5.2.1.15 |
genEquipRfuCfgATPCOverrideTimeoutThis parameter configures the timer to be counted while in ATPC in case of maximum power transmission.
If this timer expires, the system will transmit at a default level defined in genEquipRfuCfgATPCOverrideTxLevelrw INTEGER .1.3.6.1.4.1.2281.10.5.2.1.16 |
genEquipRfuCfgATPCOverrideTimerCounterThis parameter shows the time left in the timer defined by genEquipRfuCfgATPCOverrideTxLevelro INTEGER .1.3.6.1.4.1.2281.10.5.2.1.17 |
genEquipRfuCfgATPCOverrideTimerCancelSetting this parameter to ON will cancel the ATPC override mode.
This will only be effective while in this mode i.e. the system had been transmitting
at maximum power for a time longer than defined in genEquipRfuCfgATPCOverrideTxLevel
and now is transmitting at the default level defined in genEquipRfuCfgATPCOverrideTxLevel.
Following execution, the system will go back to normal ATPC operating moderw OffOn .1.3.6.1.4.1.2281.10.5.2.1.18 |
genEquipRfuUploadTableRFU Upload Data table. SEQUENCE OF GenEquipRfuUploadEntry .1.3.6.1.4.1.2281.10.5.3 |
genEquipRfuUploadEntryEntry containing the data of the RFU. GenEquipRfuUploadEntry .1.3.6.1.4.1.2281.10.5.3.1 |
genEquipRfuUploadIdThis value indicates an index of a specific RFUro RadioId .1.3.6.1.4.1.2281.10.5.3.1.1 |
genEquipRfuUploadSwCommandThis value initiates SW upload to the RFU.rw Enumeration .1.3.6.1.4.1.2281.10.5.3.1.2 |
genEquipRfuUploadSwStatusThis value indicates the status of the SW load operation on the RFU.ro Enumeration .1.3.6.1.4.1.2281.10.5.3.1.3 |
genEquipRfuUploadCounterThis parameter shows the progress (in blocks) of RFU software downloadro INTEGER .1.3.6.1.4.1.2281.10.5.3.1.4 |
genEquipRFUNG OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.5.4 |
genEquipRfuSwInstallTableRFU software managemet install configuration. SEQUENCE OF GenEquipRfuSwInstallEntry .1.3.6.1.4.1.2281.10.5.4.2 |
genEquipRfuSwInstallEntryRFU software managemet install configuration. GenEquipRfuSwInstallEntry .1.3.6.1.4.1.2281.10.5.4.2.1 |
genEquipRfuSwInstallIfIndexRFU ifIndexro INTEGER .1.3.6.1.4.1.2281.10.5.4.2.1.1 |
genEquipRfuSwInstallOperationRFU software installation operation to be performed.rw Enumeration .1.3.6.1.4.1.2281.10.5.4.2.1.2 |
genEquipRfuSwInstallTimedInstallationDetermines whether the installation will be carried out after a configured timer.rw NoYes .1.3.6.1.4.1.2281.10.5.4.2.1.3 |
genEquipRfuSwInstallTimerTimer for timed installationsrw INTEGER .1.3.6.1.4.1.2281.10.5.4.2.1.4 |
genEquipRfuInstalledVersionsTableRFU software managemet installed versuion. SEQUENCE OF GenEquipRfuInstalledVersionsEntry .1.3.6.1.4.1.2281.10.5.4.3 |
genEquipRfuInstalledVersionsEntryRFU software managemet installed version. GenEquipRfuInstalledVersionsEntry .1.3.6.1.4.1.2281.10.5.4.3.1 |
genEquipRfuInstalledVersionsIfIndexRFU ifIndexro INTEGER .1.3.6.1.4.1.2281.10.5.4.3.1.1 |
genEquipRfuInstalledVersionsDSPRFU version DSP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.3.1.2 |
genEquipRfuInstalledVersionsConfigurationsConfiguration tables.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.3.1.3 |
genEquipRfuInstalledVersionsConstantsConstant tablesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.3.1.4 |
genEquipRfuInstalledVersionsScriptsRFU scriptsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.3.1.5 |
genEquipRfuInstalledVersionsFirmwareFirmwarero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.3.1.6 |
genEquipRfuSwStatusTableRFU software managemet installed status. SEQUENCE OF GenEquipRfuSwStatusEntry .1.3.6.1.4.1.2281.10.5.4.4 |
genEquipRfuSwStatusEntryRFU software managemet installed status. GenEquipRfuSwStatusEntry .1.3.6.1.4.1.2281.10.5.4.4.1 |
genEquipRfuSwStatusIfIndexRFU ifIndexro INTEGER .1.3.6.1.4.1.2281.10.5.4.4.1.1 |
genEquipRfuSwStatusCurrentStateCurrent state of the install operation.ro RFUSoftwareInstallStat .1.3.6.1.4.1.2281.10.5.4.4.1.2 |
genEquipRfuSwStatusProgressProgress of the current install operation in percentage.ro INTEGER .1.3.6.1.4.1.2281.10.5.4.4.1.3 |
genEquipRfuRunningVersionsTableRFU software managemet rinning versions. SEQUENCE OF GenEquipRfuRunningVersionsEntry .1.3.6.1.4.1.2281.10.5.4.5 |
genEquipRfuRunningVersionsEntryRFU software managemet running versions. GenEquipRfuRunningVersionsEntry .1.3.6.1.4.1.2281.10.5.4.5.1 |
genEquipRfuRunningVersionsIfIndexRFU ifIndexro INTEGER .1.3.6.1.4.1.2281.10.5.4.5.1.1 |
genEquipRfuRunningVersionsDSPDSP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.5.1.2 |
genEquipRfuRunningVersionsConfigurationsConfiguration tables.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.5.1.3 |
genEquipRfuRunningVersionsConstantsConstant tables.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.5.1.4 |
genEquipRfuRunningVersionsScriptsRFU scripts.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.5.1.5 |
genEquipRfuRunningVersionsFirmwareFirmware.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.5.1.6 |
genEquipRfuAvailableVersionsTableRFU software managemet available versions. SEQUENCE OF GenEquipRfuAvailableVersionsEntry .1.3.6.1.4.1.2281.10.5.4.6 |
genEquipRfuAvailableVersionsEntryRFU software managemet available versions. GenEquipRfuAvailableVersionsEntry .1.3.6.1.4.1.2281.10.5.4.6.1 |
genEquipRfuAvailableVersionsRfuTypeRFU Typero RfuMajorType .1.3.6.1.4.1.2281.10.5.4.6.1.1 |
genEquipRfuAvailableVersionsDSPDSP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.6.1.2 |
genEquipRfuAvailableVersionsConfigurationsConfiguration tables.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.6.1.3 |
genEquipRfuAvailableVersionsConstantsConstant tables.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.6.1.4 |
genEquipRfuAvailableVersionsScriptsRFU scripts.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.6.1.5 |
genEquipRfuAvailableVersionsFirmwareFirmware.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.5.4.6.1.6 |
genEquipRadio OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7 |
genEquipRadioStatusTableRadio status table SEQUENCE OF GenEquipRadioStatusEntry .1.3.6.1.4.1.2281.10.7.1 |
genEquipRadioStatusEntryRadio status table GenEquipRadioStatusEntry .1.3.6.1.4.1.2281.10.7.1.1 |
genEquipRadioStatusRadioIdThis value is the radio ID that serves as the table Index.ro RadioId .1.3.6.1.4.1.2281.10.7.1.1.1 |
genEquipRadioStatusMSEMSE (Mean Square Error) of the Rx signal (measured in dB * 100).
-9900 value (-99.00 dB) means that the signal is not locked.
~ -3500 value (-35.00 dB) is a good MSE.ro INTEGER .1.3.6.1.4.1.2281.10.7.1.1.2 |
genEquipRadioStatusDefectedBlocksThe number of counted defective radio blocks.ro INTEGER .1.3.6.1.4.1.2281.10.7.1.1.3 |
genEquipRadioStatusBERThe measured BER (Bit Error Rate) level of the modem.ro ThresholdExponent .1.3.6.1.4.1.2281.10.7.1.1.4 |
genEquipRadioStatusXPIXPI (Cross Polar Interference) level measured by the modem.ro INTEGER .1.3.6.1.4.1.2281.10.7.1.1.5 |
genEquipRadioStatusXPICEnabledThis parameter indicates whether an XPIC script is currently loaded.ro EnableDisableSMI2 .1.3.6.1.4.1.2281.10.7.1.1.6 |
genEquipRadioCfgTableRadio Configuration table. SEQUENCE OF GenEquipRadioCfgEntry .1.3.6.1.4.1.2281.10.7.2 |
genEquipRadioCfgEntryRadio Configuration table. GenEquipRadioCfgEntry .1.3.6.1.4.1.2281.10.7.2.1 |
genEquipRadioCfgRadioIdThis value is the radio ID that serves as this table Indexro RadioId .1.3.6.1.4.1.2281.10.7.2.1.1 |
genEquipRadioCfgLinkIdRadio configuration link IDrw INTEGER .1.3.6.1.4.1.2281.10.7.2.1.2 |
genEquipRadioCfgMACHeaderCompressionThe Admin state of the MAC header compression.rw EnableDisable .1.3.6.1.4.1.2281.10.7.2.1.3 |
genEquipRadioCfgClearCountersSetting this parameter to ON will clear the radio counters.rw OffOn .1.3.6.1.4.1.2281.10.7.2.1.4 |
genEquipRadioCfgIfLoopbackThe administrative state of the IF loopback.rw Enumeration .1.3.6.1.4.1.2281.10.7.2.1.5 |
genEquipRadioCfgExcessiveBERThresholdThe BER threshold that when exceeded will be considered as 'Excessive BER'.rw ThresholdExponent .1.3.6.1.4.1.2281.10.7.2.1.6 |
genEquipRadioCfgSignalDegradeThresholdThe BER (Bit Error Rate) threshold that when exceeded will be considered as 'Signal Degrade'.rw ThresholdExponent .1.3.6.1.4.1.2281.10.7.2.1.7 |
genEquipRadioCfgRadioAdminRadio Admin state (Enable,Disable) can be used in ifTable::ifAdminStatusrwobsolete EnableDisable .1.3.6.1.4.1.2281.10.7.2.1.8 |
genEquipRadioCfgRadioOperationalStatusThe operational status of the radio interface.ro DownUp .1.3.6.1.4.1.2281.10.7.2.1.9 |
genEquipRadioCfgRadioTrafficPrioritySchemethis parameter configures the relative priority of different traffic streams.
High-tdm-over-high-ethernet gives priorities as follows:
(1) TDM high priority (2) Ethernet high priority (3) TDM low priority (4) Etherenet low priority.
High-Ethernet-over-tdm gives priorities as follows: (1) Ethernet high priority (2) TDM high priority (3) TDM low priority (4) Etherenet low priority.
Tdm-over-ethernet gives priorities as follows: (1) TDM high priority (2) TDM low priority (3) Ethernetrw Enumeration .1.3.6.1.4.1.2281.10.7.2.1.10 |
genEquipRadioCfgRadioHiPriorityEthernetBWthis parameter configures the amount of bandwith reserved for high-priority Ethernet.
It must be a number in resolution of 2.048 Mbit/s for E1 systems or 1.544 Mbit/s for T1 systems.
The maximum possible capacity is given by genEquipRadioCfgRadioCurrentAvailableCapacityrw INTEGER .1.3.6.1.4.1.2281.10.7.2.1.11 |
genEquipRadioCfgRadioMultiRadioEnablethis parameter enables/disables the multi-radio feature for this radio.
Notice that for the feature to work it must be configured in two adjacent radios (odd and even slots)rw EnableDisable .1.3.6.1.4.1.2281.10.7.2.1.12 |
genEquipRadioCfgRadioMultiRadioBlockLocalTrafficthis parameter allows stopping distribution of data to different radios in Multi-Radio mode for debugging purposesrw Enumeration .1.3.6.1.4.1.2281.10.7.2.1.13 |
genEquipRadioCfgRadioMultiRadioBlockMateTrafficthis parameter allows stopping distribution of data to the radio in the mate IDU in Multi-Radio mode for debugging purposesrw Enumeration .1.3.6.1.4.1.2281.10.7.2.1.14 |
genEquipRadioCfgRadioCurrentAvailableCapacityThis parameter indicates the maximum possible capacity available for Ethernet.
This sets a top limit for amount of high-priority Ethernet bandwidthro INTEGER .1.3.6.1.4.1.2281.10.7.2.1.15 |
genEquipRadioCfgRadioMultiRadioExcessiveBERAdminThis parameter configures whether in Multi-Radio mode data stops being distributed to the radio in
case of an excessive BER conditionrw EnableDisable .1.3.6.1.4.1.2281.10.7.2.1.16 |
genEquipRadioCfgRadioMultiRadioSignalDegradeAdminThis parameter configures whether in Multi-Radio mode data stops being distributed to the radio in
case of a signal degraded conditionrw EnableDisable .1.3.6.1.4.1.2281.10.7.2.1.17 |
genEquipRadioCfgEnAlarmGenOnRslDegradeTEnable/Disable alarm and trapgeneration on RSL degradationbelow user defined threshold.If enabled,
trap and alarm willbe generated when current RSLlevel degrades below userdefined threshold for 5subsequent seconds.
Alarm willbe cleared after RSL level staysabove the threshold for at leastanother 5 seconds.
Thresholdis calculated as a nominal RSLlevel minus the degradationmargin.rw EnableDisable .1.3.6.1.4.1.2281.10.7.2.1.18 |
genEquipRadioCfgAlarmGenRslNominalLevelRSL nominal level [in dBm] foralarm and event generation.rw INTEGER (-100..0) .1.3.6.1.4.1.2281.10.7.2.1.19 |
genEquipRadioCfgAlarmGenRslDegradationMarginRSL degradation margin [in dB]for alarm and eventgeneration. The margin isrelative to the nominal RSLlevelrw INTEGER .1.3.6.1.4.1.2281.10.7.2.1.20 |
genEquipRadioCfgLinkShutDownOnRadioFailureThis parameter enables shutting down the link and initiating automatic
state propagation upon a failure in each one of the radios.
Radio failure condition is determined by user configurations and can be
one of the following:
Radio LOF, Link ID mismatch, Radio excessive BER, Radio signal degrade, Link ID mismatch.rw EnableDisable .1.3.6.1.4.1.2281.10.7.2.1.21 |
genEquipRadioCfgLoopbackTimeoutThe timeout in minutes for automatic termination of the loopback. The value '0' refers to 'no timeout'.rw INTEGER .1.3.6.1.4.1.2281.10.7.2.1.22 |
genEquipRadioCfgAbcModeTThe radio mode (multi direction or multi carrier).rw Enumeration .1.3.6.1.4.1.2281.10.7.2.1.23 |
genEquipRemoteRadio OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.3 |
genEquipRemoteRadioTableRemote radio table. SEQUENCE OF GenEquipRemoteRadioEntry .1.3.6.1.4.1.2281.10.7.3.1 |
genEquipRemoteRadioEntryRemote radio table. GenEquipRemoteRadioEntry .1.3.6.1.4.1.2281.10.7.3.1.1 |
genEquipRemoteRadioRadioIdThis value is the radio ID that serves as this table Indexro RadioId .1.3.6.1.4.1.2281.10.7.3.1.1.1 |
genEquipRemoteRadioRemoteCommunicationThe operational status of the remote radio.ro DownUp .1.3.6.1.4.1.2281.10.7.3.1.1.2 |
genEquipRemoteRadioRemoteIPAddrThe remote Ip address.rw IpAddress .1.3.6.1.4.1.2281.10.7.3.1.1.3 |
genEquipRemoteRadioRemoteRxLevelThe Rx level of the remote radio (in dBm)ro INTEGER (-199..0) .1.3.6.1.4.1.2281.10.7.3.1.1.4 |
genEquipRemoteRadioRemoteForceMaxTxLevelCommand that forces the remote radio maximum Tx level (in dBm)rw INTEGER (-50..34) .1.3.6.1.4.1.2281.10.7.3.1.1.5 |
genEquipRemoteRadioRemoteTxFreqThe remote radio Tx frequancy (in MHz).rw INTEGER .1.3.6.1.4.1.2281.10.7.3.1.1.6 |
genEquipRemoteRadioRemoteRxFreqThe remote radio Rx frequancy (in MHz).rw INTEGER .1.3.6.1.4.1.2281.10.7.3.1.1.7 |
genEquipRemoteRadioRemoteATPCReferenceRxLevelThe RSL reference level for the ATPC mechanism in the remote radio.rw INTEGER .1.3.6.1.4.1.2281.10.7.3.1.1.8 |
genEquipRemoteRadioRemoteFloatingIPAddrThis value indicates the floating IP address used in
the remote shelf if its main units are in 1+1 protection mode.rw IpAddress .1.3.6.1.4.1.2281.10.7.3.1.1.9 |
genEquipRemoteRadioRemoteDefaultGatewayDefault gateway of remote NE (Network Element) across this radio link.ro IpAddress .1.3.6.1.4.1.2281.10.7.3.1.1.10 |
genEquipRemoteRadioRemoteMostSevereAlarmMost severe alarm of remote NE (Network Element) across this radio link.ro Severity .1.3.6.1.4.1.2281.10.7.3.1.1.11 |
genEquipRemoteRadioRemoteSubnetMaskSubnet mask of remote NE (Network Element) across this radio link.ro IpAddress .1.3.6.1.4.1.2281.10.7.3.1.1.12 |
genEquipRemoteRadioRemoteSlotIDThe remote radio slot number.ro INTEGER .1.3.6.1.4.1.2281.10.7.3.1.1.13 |
genEquipRemoteRadioRemoteForceTxMuteForce the mute state of the remote unit radio interface.rw OffOn .1.3.6.1.4.1.2281.10.7.3.1.1.14 |
genEquipRemoteRadioRemoteLinkIdThe Link Id of the remote unit radio interface.rw INTEGER .1.3.6.1.4.1.2281.10.7.3.1.1.15 |
genEquipRemoteRadioRemoteATPCoverrideStateRemote Radio ATPC Override Timer expire state.ro NoYes .1.3.6.1.4.1.2281.10.7.3.1.1.16 |
genEquipRemoteRadioRemoteATPCoverrideStateCancelhis coomand cancel remote ATPC override state.rw NoYes .1.3.6.1.4.1.2281.10.7.3.1.1.17 |
genEquipRemoteRadioRemoteDataLoopBackAdminRemote unit administrator state of data loopback.rw EnableDisable .1.3.6.1.4.1.2281.10.7.3.1.1.18 |
genEquipRemoteRadioRemoteDataLoopBackDurationRemote Data LoopBack Duration at remote unit[Minutes], zero for infinite loop back.rw INTEGER .1.3.6.1.4.1.2281.10.7.3.1.1.19 |
genEquipRemoteRadioRemoteDataLoopBackSwitchAddressRemote Unit switch MAC DA.rw EnableDisable .1.3.6.1.4.1.2281.10.7.3.1.1.20 |
genEquipRemoteRadioRemoteGreenReferenceRxLevelRemote Radio Green RSL reference level[dBm].ro INTEGER .1.3.6.1.4.1.2281.10.7.3.1.1.21 |
genEquipRemoteRadioRemoteMNGvlanRemote Management Vlan.rw INTEGER .1.3.6.1.4.1.2281.10.7.3.1.1.22 |
genEquipRemoteRadioRemoteResetRemote reset of unit.rw FalseTrue .1.3.6.1.4.1.2281.10.7.3.1.1.23 |
genEquipRemoteRadioRemoteGreenModeAdminRemote Unit Tx Green Mode Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.7.3.1.1.24 |
genEquipRemoteRadioRemoteWebProtocolRemote web protocol.rw CommunicationChannel .1.3.6.1.4.1.2281.10.7.3.1.1.25 |
genEquipRemoteRadioRemoteIPv6AddrRemote IPv6 Address.rw OCTET STRING .1.3.6.1.4.1.2281.10.7.3.1.1.26 |
genEquipRemoteRadioRemotePrefixLengthRemote IPv6 Subnet-Mask.rw INTEGER .1.3.6.1.4.1.2281.10.7.3.1.1.27 |
genEquipRemoteRadioRemoteDefaultGatewayIpv6Remote IPv6 Default Gateway.rw OCTET STRING .1.3.6.1.4.1.2281.10.7.3.1.1.28 |
genEquipRemoteRadioRemoteResetSlotRemote Unit Reset Slot.rw FalseTrue .1.3.6.1.4.1.2281.10.7.3.1.1.29 |
genEquipRadioMRMC OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.4 |
genEquipRadioMRMCTableMRMC stauts table (Multi rate multi constellation) SEQUENCE OF GenEquipRadioMRMCEntry .1.3.6.1.4.1.2281.10.7.4.1 |
genEquipRadioMRMCEntryMRMC status table (Multi rate multi constellation) GenEquipRadioMRMCEntry .1.3.6.1.4.1.2281.10.7.4.1.1 |
genEquipRadioMRMCRadioIdThis value is the radio ID that serves as this table Indexro RadioId .1.3.6.1.4.1.2281.10.7.4.1.1.1 |
genEquipRadioMRMCSelectedScriptIndexThe index of the MRMC script. The description of the script located in the genEquipRadioMRMCScriptTable.rw INTEGER .1.3.6.1.4.1.2281.10.7.4.1.1.2 |
genEquipRadioMRMCOccupidBandwidthThe Occupid Bandwidth (in KHz).ro INTEGER .1.3.6.1.4.1.2281.10.7.4.1.1.3 |
genEquipRadioMRMCOperModeThe Mode of the MRMC script.ro Enumeration .1.3.6.1.4.1.2281.10.7.4.1.1.4 |
genEquipRadioMRMCCurrTxProfileThe Tx profile number.ro MrmcProfile .1.3.6.1.4.1.2281.10.7.4.1.1.5 |
genEquipRadioMRMCCurrTxQAMThe current Tx QAM (modulation).ro INTEGER .1.3.6.1.4.1.2281.10.7.4.1.1.6 |
genEquipRadioMRMCCurrTxBitrateThe current Tx bit rate (in Kbps)ro MrmcBitRate .1.3.6.1.4.1.2281.10.7.4.1.1.7 |
genEquipRadioMRMCCurrTxVcThe current number of Tx TDM channels.ro INTEGER .1.3.6.1.4.1.2281.10.7.4.1.1.8 |
genEquipRadioMRMCCurrRxProfileThe current Rx profile numberro MrmcProfile .1.3.6.1.4.1.2281.10.7.4.1.1.9 |
genEquipRadioMRMCCurrRxQAMThe current Rx QAM (modulation).ro INTEGER .1.3.6.1.4.1.2281.10.7.4.1.1.10 |
genEquipRadioMRMCCurrRxBitrateThe current total Rx bit rate (in Kbps)ro MrmcBitRate .1.3.6.1.4.1.2281.10.7.4.1.1.11 |
genEquipRadioMRMCCurrRxVcThe current number of Rx TDM channels.ro INTEGER .1.3.6.1.4.1.2281.10.7.4.1.1.12 |
genEquipRadioMRMCCurrGradeThe grade of the current script.ro RfuGrade .1.3.6.1.4.1.2281.10.7.4.1.1.13 |
genEquipRadioMRMCEnAlarmOnAcmProfileDegradeEnable/Disable event and trapgeneration on ACM profiledegrade.
When enabled and ifcurrent radio script supports Adaptive Code Modulation(ACM) event and trap will
begenerated upon ACM profiledegradation below userdefinedthreshold.
Alarm willbe generated only if the ACMprofile stays below thethreshold for at least 5 subsequent seconds.
Alarm willbe cleared after ACM profilereturns to be above thethreshold again.rw EnableDisable .1.3.6.1.4.1.2281.10.7.4.1.1.14 |
genEquipRadioMRMCAlarmOnAcmProfileDegradeThresholdACM profile threshold foralarm generationrw INTEGER .1.3.6.1.4.1.2281.10.7.4.1.1.15 |
genEquipRadioMRMCScriptTableThe MRMC script table. SEQUENCE OF GenEquipRadioMRMCScriptEntry .1.3.6.1.4.1.2281.10.7.4.2 |
genEquipRadioMRMCScriptEntryThe MRMC script table. GenEquipRadioMRMCScriptEntry .1.3.6.1.4.1.2281.10.7.4.2.1 |
genEquipRadioMRMCScriptRadioIdThis value is the radio ID that serves as this table Indexro RadioId .1.3.6.1.4.1.2281.10.7.4.2.1.1 |
genEquipRadioMRMCScriptIndexThe index of the MRMC scripts.ro INTEGER .1.3.6.1.4.1.2281.10.7.4.2.1.2 |
genEquipRadioMRMCScriptNameThe MRMC script name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.7.4.2.1.3 |
genEquipRadioMRMCScriptOperModeThe script operational mode.ro Enumeration .1.3.6.1.4.1.2281.10.7.4.2.1.4 |
genEquipRadioMRMCScriptProfileThe profile number of the scriptro MrmcProfile .1.3.6.1.4.1.2281.10.7.4.2.1.5 |
genEquipRadioMRMCScriptProfileBitrateThe Bit rate of the MRMC profile (in Kbps).ro MrmcBitRate .1.3.6.1.4.1.2281.10.7.4.2.1.6 |
genEquipRadioMRMCScriptAdaptivePower'Adaptive Power' option which is available only when operation mode is ACM-adaptivero Enumeration .1.3.6.1.4.1.2281.10.7.4.2.1.7 |
genEquipRadioMRMCScriptReference'Reference Class' option which is available only when operation mode 'ACM-adaptive' AND 'Adaptive Power' are enabled.ro Enumeration .1.3.6.1.4.1.2281.10.7.4.2.1.8 |
genEquipRadioMRMCScriptMinProfile'Minimum Profile' option which is available only when operation mode 'ACM-adaptive' AND 'Adaptive Power' are enabled.
It state the minimum profile level for this script.ro MrmcProfile .1.3.6.1.4.1.2281.10.7.4.2.1.9 |
genEquipRadioMRMCFilteredTableFiltered MRMC scripts table. SEQUENCE OF GenEquipRadioMRMCFilteredEntry .1.3.6.1.4.1.2281.10.7.4.3 |
genEquipRadioMRMCFilteredEntryList of the filtered MRMC scripts. GenEquipRadioMRMCFilteredEntry .1.3.6.1.4.1.2281.10.7.4.3.1 |
genEquipRadioMRMCFilteredRadioIdThe index of the radio interfacero RadioId .1.3.6.1.4.1.2281.10.7.4.3.1.1 |
genEquipRadioMRMCFilteredScriptIdThe MRMC filtered script IDs that are available in the specific radio.ro MrmcScriptId .1.3.6.1.4.1.2281.10.7.4.3.1.2 |
genEquipRadioMRMCProfileAttrTableMRMC profile attribute table. SEQUENCE OF GenEquipRadioMRMCProfileAttrEntry .1.3.6.1.4.1.2281.10.7.4.4 |
genEquipRadioMRMCProfileAttrEntryMRMC script profile's attributes. GenEquipRadioMRMCProfileAttrEntry .1.3.6.1.4.1.2281.10.7.4.4.1 |
genEquipRadioMRMCProfileAttrScriptIdThe index of the tablero MrmcScriptId .1.3.6.1.4.1.2281.10.7.4.4.1.1 |
genEquipRadioMRMCProfileAttrTxProfileThe profile number of the TX channel.ro MrmcProfile .1.3.6.1.4.1.2281.10.7.4.4.1.2 |
genEquipRadioMRMCProfileAttrRxProfileThe profile number of the RX channel.ro MrmcProfile .1.3.6.1.4.1.2281.10.7.4.4.1.3 |
genEquipRadioMRMCProfileAttrTxQAMIndicates the QAM level of the TX channel.ro QamOrder .1.3.6.1.4.1.2281.10.7.4.4.1.4 |
genEquipRadioMRMCProfileAttrTxBitRateIndicates the TX bit-rate of the profile.ro MrmcBitRate .1.3.6.1.4.1.2281.10.7.4.4.1.5 |
genEquipRadioMRMCProfileAttrRxQAMIndicates the QAM level of the RX channel.ro QamOrder .1.3.6.1.4.1.2281.10.7.4.4.1.6 |
genEquipRadioMRMCProfileAttrRxBitRateRX bit-rate of the profile.ro MrmcBitRate .1.3.6.1.4.1.2281.10.7.4.4.1.7 |
genEquipRadioMRMCScriptAttrTableMRMC script attribute table. SEQUENCE OF GenEquipRadioMRMCScriptAttrEntry .1.3.6.1.4.1.2281.10.7.4.5 |
genEquipRadioMRMCScriptAttrEntryMRMC script attributes. GenEquipRadioMRMCScriptAttrEntry .1.3.6.1.4.1.2281.10.7.4.5.1 |
genEquipRadioMRMCScriptAttrScriptIdThe ID of the MRMC script.ro MrmcScriptId .1.3.6.1.4.1.2281.10.7.4.5.1.1 |
genEquipRadioMRMCScriptAttrScriptNameThe name that identifies the script.ro DisplayString .1.3.6.1.4.1.2281.10.7.4.5.1.2 |
genEquipRadioMRMCScriptAttrSupportACMIndicates if the MRMC script supports ACM (Adaptive Coding Modulation) functionalityro NoYes .1.3.6.1.4.1.2281.10.7.4.5.1.3 |
genEquipRadioMRMCScriptAttrStandardThe standard that the MRMC script is designed to comply with.ro Enumeration .1.3.6.1.4.1.2281.10.7.4.5.1.4 |
genEquipRadioMRMCScriptAttrMultiCarrierIndicates whether the MRMC script support a single carrier or any kind of multi carrier.ro Enumeration .1.3.6.1.4.1.2281.10.7.4.5.1.5 |
genEquipRadioMRMCScriptAttrAdjChannelIndicates whether the MRMC script supports adjacent channelro NoYes .1.3.6.1.4.1.2281.10.7.4.5.1.6 |
genEquipRadioMRMCScriptAttrModSchemeIndicates whether the MRMC script supports fixed or adaptive (ACM) modulation scheme.ro Enumeration .1.3.6.1.4.1.2281.10.7.4.5.1.7 |
genEquipRadioMRMCScriptAttrSymmetryIndicates whether the MRMC script is designed to normal (symmetrical) BW or an Asymmetrical BW.ro Enumeration .1.3.6.1.4.1.2281.10.7.4.5.1.8 |
genEquipRadioMRMCScriptAttrLatencyThe Latency level of the MRMC Script.ro Enumeration .1.3.6.1.4.1.2281.10.7.4.5.1.9 |
genEquipRadioMRMCScriptAttrTxBWThe TX channel bandwidth (channel spacing) of the MRMC script.ro INTEGER .1.3.6.1.4.1.2281.10.7.4.5.1.10 |
genEquipRadioMRMCScriptAttrRxBWThe RX channel bandwidth (channel spacing) of the MRMC script.ro INTEGER .1.3.6.1.4.1.2281.10.7.4.5.1.11 |
genEquipRadioMRMCScriptAttrTxOccupiedBWThe TX channel occupied bandwidth of the MRMC script.ro INTEGER .1.3.6.1.4.1.2281.10.7.4.5.1.12 |
genEquipRadioMRMCScriptAttrRxOccupiedBWThe RX channel occupied bandwidth of the MRMC script.ro INTEGER .1.3.6.1.4.1.2281.10.7.4.5.1.13 |
genEquipRadioMRMCScriptAttrLinkGradeThe link grade level that the MRMC script is designed to cope with.ro RfuGrade .1.3.6.1.4.1.2281.10.7.4.5.1.14 |
genEquipRadioMRMCScriptAttrDiffGradeThe Differential grade level that the MRMC script is designed to cope with.ro RfuGrade .1.3.6.1.4.1.2281.10.7.4.5.1.15 |
genEquipRadioMRMCScriptAttrChannelBWThe channel bandwidth (channel spacing) the MRMC script is designed to.ro INTEGER .1.3.6.1.4.1.2281.10.7.4.5.1.16 |
genEquipRadioMRMCScriptAttrTxMaxProfileThe maximum available TX profile of the MRMC script.ro MrmcProfile .1.3.6.1.4.1.2281.10.7.4.5.1.17 |
genEquipRadioMRMCScriptAttrRxMaxProfileThe maximum available RX profile of the MRMC script.ro MrmcProfile .1.3.6.1.4.1.2281.10.7.4.5.1.18 |
genEquipRadioMRMCConfigTableMRMC script configuration. SEQUENCE OF GenEquipRadioMRMCConfigEntry .1.3.6.1.4.1.2281.10.7.4.6 |
genEquipRadioMRMCConfigEntryThe configured parameters of the MRMC script. GenEquipRadioMRMCConfigEntry .1.3.6.1.4.1.2281.10.7.4.6.1 |
genEquipRadioMRMCConfigRadioIdThe index of the MRMC Configuration Table.ro RadioId .1.3.6.1.4.1.2281.10.7.4.6.1.1 |
genEquipRadioMRMCConfigActiveScriptIdThe script ID of required MRMC script.rw MrmcScriptId .1.3.6.1.4.1.2281.10.7.4.6.1.2 |
genEquipRadioMRMCConfigStandbyScriptIdThe script ID which is in standby.rw MrmcScriptId .1.3.6.1.4.1.2281.10.7.4.6.1.3 |
genEquipRadioMRMCConfigOperModeThe operational mode of the MRMC script, whether it is fixed or adaptive modulation functionality.rw Enumeration .1.3.6.1.4.1.2281.10.7.4.6.1.4 |
genEquipRadioMRMCConfigMaxProfileThe maximum profile which is required for the MRMC scriptrw MrmcProfile .1.3.6.1.4.1.2281.10.7.4.6.1.5 |
genEquipRadioMRMCConfigMinProfileThe minimum profile which is required for the MRMC scriptrw MrmcProfile .1.3.6.1.4.1.2281.10.7.4.6.1.6 |
genEquipRadioMRMCConfigAdaptivePowerAdminEnable or disable the adaptive power functionality during ACM operation.rw EnableDisable .1.3.6.1.4.1.2281.10.7.4.6.1.7 |
genEquipRadioMRMCConfigAdaptivePowerRefClassDetermines the efficiency class for the adaptive power functionality in ACM operation.rw Enumeration .1.3.6.1.4.1.2281.10.7.4.6.1.8 |
genEquipRadioComp OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.5 |
genEquipRadioCompCfgTableRadio Compression table SEQUENCE OF GenEquipRadioCompCfgEntry .1.3.6.1.4.1.2281.10.7.5.1 |
genEquipRadioCompCfgEntryRadio Compression table GenEquipRadioCompCfgEntry .1.3.6.1.4.1.2281.10.7.5.1.1 |
genEquipRadioCompModeSetting Ethernet packet header & payload compression mode. In Enhanced mode packet header can be compressed up to L4 and data compression can be activated.
Legacy mode is back compatible to earlier software and hardware releases.rw Enumeration .1.3.6.1.4.1.2281.10.7.5.1.1.1 |
genEquipRadioEnhHeaderCompAdminEnable/Disable Enhanced Header compression.rw AllowedNotAllowed .1.3.6.1.4.1.2281.10.7.5.1.1.2 |
genEquipRadioEnhDataCompAdminEnable/Disable Enhanced Data compression.rw EnableDisable .1.3.6.1.4.1.2281.10.7.5.1.1.3 |
genEquipRadioEnhHeaderCompModeSetting Enhanced Header Compression depth.rw Enumeration .1.3.6.1.4.1.2281.10.7.5.1.1.4 |
genEquipRadioCompStatusTableRadio Compression status table. SEQUENCE OF GenEquipRadioCompStatusEntry .1.3.6.1.4.1.2281.10.7.5.2 |
genEquipRadioCompStatusEntryRadio Compression status table. GenEquipRadioCompStatusEntry .1.3.6.1.4.1.2281.10.7.5.2.1 |
genEquipRadioCompOperationalStateCurrent compression mode operational status.ro Enumeration .1.3.6.1.4.1.2281.10.7.5.2.1.1 |
genEquipRadioCompExclRulesTableEnhanced Header Compression excluding rules table. SEQUENCE OF GenEquipRadioCompExclRulesEntry .1.3.6.1.4.1.2281.10.7.5.3 |
genEquipRadioCompExclRulesEntryEnhanced Header Compression excluding rules table. GenEquipRadioCompExclRulesEntry .1.3.6.1.4.1.2281.10.7.5.3.1 |
genEquipRadioCompExclRuleIdExcluding rule number index.ro INTEGER .1.3.6.1.4.1.2281.10.7.5.3.1.1 |
genEquipRadioCompExclRuleTypeAdd excluding rule for enhanced header compression. Excluding rule must have a number (rule-id),
text description (rule-name) and excluding rule type whichcan be one of the following:
VLAN Id or MAC destination address or MAC source address or Ethernet ethertype or user defined flow type.rw Enumeration .1.3.6.1.4.1.2281.10.7.5.3.1.2 |
genEquipRadioCompExclRuleNameExcluding rule name. User specified.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.7.5.3.1.3 |
genEquipRadioCompExclRuleValueExcluding rule value. For example: MAC address or Ethertype.rw OCTET STRING .1.3.6.1.4.1.2281.10.7.5.3.1.4 |
genEquipRadioCompExclRuleRowStatusRow status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.7.5.3.1.30 |
genEquipRadioCompNG OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.5.4 |
genEquipRadioCompNGCfgTableRadio Ethernet and compression config table SEQUENCE OF GenEquipRadioCompNGCfgEntry .1.3.6.1.4.1.2281.10.7.5.4.1 |
genEquipRadioCompNGCfgEntryRadio Ethernet and compression config table entry GenEquipRadioCompNGCfgEntry .1.3.6.1.4.1.2281.10.7.5.4.1.1 |
genEquipRadioCompNGCfgifIndexInterface Index.rw INTEGER .1.3.6.1.4.1.2281.10.7.5.4.1.1.1 |
genEquipRadioHeaderCompNGCfgClearStatsClear counters on the radio port. This includes: compression counters,
PTP optimized transport and cut-through counters.rw NoYes .1.3.6.1.4.1.2281.10.7.5.4.1.1.2 |
genEquipRadioHeaderCompNGCfgUserFlowTypeUser configured flow type for enhanced HC.
This flow type is used for statistics and performance evaluation of the enhanced HC.rw INTEGER .1.3.6.1.4.1.2281.10.7.5.4.1.1.3 |
genEquipRadioHeaderCompNGCfgModeLegacy mode is compatible for old platforms. Disabled mode disables compression.
Other modes specify compression depth.rw HcModeType .1.3.6.1.4.1.2281.10.7.5.4.1.1.4 |
genEquipRadioCutThroughNGCfgModeEnable/Disable cut-through.rw NoYes .1.3.6.1.4.1.2281.10.7.5.4.1.1.5 |
genEquipRadioCompNGExclRulesTableEnhanced HC excluding rules table SEQUENCE OF GenEquipRadioCompNGExclRulesEntry .1.3.6.1.4.1.2281.10.7.5.4.2 |
genEquipRadioCompNGExclRulesEntryEnhanced HC excluding rules table entry GenEquipRadioCompNGExclRulesEntry .1.3.6.1.4.1.2281.10.7.5.4.2.1 |
genEquipRadioCompNGExclRulesifIndexInterface Index.ro INTEGER .1.3.6.1.4.1.2281.10.7.5.4.2.1.1 |
genEquipRadioCompNGExclRuleIdExcluding rule number.ro INTEGER .1.3.6.1.4.1.2281.10.7.5.4.2.1.2 |
genEquipRadioCompNGExclRuleNameExcluding rule name.ro DisplayString .1.3.6.1.4.1.2281.10.7.5.4.2.1.3 |
genEquipRadioCompNGExclRuleTypeExcluding rule type. Possible options are: DA MAC, SA MAC, VLAN(4 bytes), Ethertype or Flow type.ro EnhancedHCExclRuleType .1.3.6.1.4.1.2281.10.7.5.4.2.1.4 |
genEquipRadioCompNGExclRuleValueExcluding rule value. The value may be MAC address, VLAN(4 bytes), Ethertype(2 bytes) or Flow type(1 byte).ro OCTET STRING .1.3.6.1.4.1.2281.10.7.5.4.2.1.5 |
genEquipRadioCutThroughNGCountersTablePort counters table SEQUENCE OF GenEquipRadioCutThroughNGCountersEntry .1.3.6.1.4.1.2281.10.7.5.4.3 |
genEquipRadioCutThroughNGCountersEntryPort counters table entry GenEquipRadioCutThroughNGCountersEntry .1.3.6.1.4.1.2281.10.7.5.4.3.1 |
genEquipRadioCutThroughNGCountersifIndexInterface Index.ro INTEGER .1.3.6.1.4.1.2281.10.7.5.4.3.1.1 |
genEquipRadioCutThroughNGCountersRxFramesCounter of good cut-through bytes received.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.3.1.2 |
genEquipRadioCutThroughNGCountersRxBytesCounter of good cut-through bytes received.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.3.1.3 |
genEquipRadioCutThroughNGCountersTxFramesCounter of cut-through frames transmitted.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.3.1.4 |
genEquipRadioCutThroughNGCountersTxBytesCounter of cut-through bytes transmitted.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.3.1.5 |
genEquipRadioCutThroughNGCountersTotalRxFramesCounter of total good frames received on the port.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.3.1.6 |
genEquipRadioCutThroughNGCountersTotalRxBytesCounter of total good bytes received on the port.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.3.1.7 |
genEquipRadioCutThroughNGCountersTotalTxBytesOutCounter of total transmitted bytes.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.3.1.8 |
genEquipRadioCutThroughNGCountersTotalTxFramesCounter of total transmitted frames.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.3.1.9 |
genEquipRadioCutThroughNGCountersTotalTxIdleBytesCounter of total transmitted idle bytes.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.3.1.10 |
genEquipRadioCutThroughNGCountersTotalTxBytesInCounter of total transmitted bytes.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.3.1.11 |
genEquipRadioCompNGStatusTableRadio Ethernet and compression status table SEQUENCE OF GenEquipRadioCompNGStatusEntry .1.3.6.1.4.1.2281.10.7.5.4.4 |
genEquipRadioCompNGStatusEntryRadio Ethernet and compression status table entry GenEquipRadioCompNGStatusEntry .1.3.6.1.4.1.2281.10.7.5.4.4.1 |
genEquipRadioCompNGStatusifindexInterface location.ro INTEGER .1.3.6.1.4.1.2281.10.7.5.4.4.1.1 |
genEquipRadioCompNGStatusOperationalStateHeader Compression operational state.ro HcModeType .1.3.6.1.4.1.2281.10.7.5.4.4.1.2 |
genEquipRadioCompNGStatusTypeHeader Compression type.ro HcType .1.3.6.1.4.1.2281.10.7.5.4.4.1.3 |
genEquipRadioCompNGCountersTableEnhanced HC counters table SEQUENCE OF GenEquipRadioCompNGCountersEntry .1.3.6.1.4.1.2281.10.7.5.4.7 |
genEquipRadioCompNGCountersEntryEnhanced HC counters table entry GenEquipRadioCompNGCountersEntry .1.3.6.1.4.1.2281.10.7.5.4.7.1 |
genEquipRadioCompNGCountersifIndexInterface location.ro INTEGER .1.3.6.1.4.1.2281.10.7.5.4.7.1.1 |
genEquipRadioCompNGCountersHCInBytesCounter of bytes on the TX side before enhanced header compression.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.7.1.2 |
genEquipRadioCompNGCountersHCOutBytesCounter of bytes on the TX side compressed by enhanced header compression.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.7.1.3 |
genEquipRadioCompNGCountersHCCompFrmCounter of frames on the TX side compressed by enhanced header compression.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.7.1.4 |
genEquipRadioCompNGCountersHCFrmUncmpExclRuleCounter of frames on the TX side not compressed by enhanced header compression due to excluding rules.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.7.1.5 |
genEquipRadioCompNGCountersHCFrmUcompInternalCounter of frames on the TX side not compressed by enhanced header compression due to other resons.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.7.1.6 |
genEquipRadioCompNGCountersHCLearningFrmCounter of learning frames transmitted by enhanced header compression.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.7.1.7 |
genEquipRadioCompNGCountersHCUserFlowTypeActiveFlowsNumber of enhanced HC active flows occupied by user selected flow type.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.7.1.8 |
genEquipRadioCompNGCountersHCTotalActiveFlowsNumber of enhanced HC active flows on the TX side.ro Counter64 .1.3.6.1.4.1.2281.10.7.5.4.7.1.9 |
genEquipRadioPtpTransport OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.6 |
genEquipRadioPtpTransportCfgTablePTP optimized transport channel configuration table. SEQUENCE OF GenEquipRadioPtpTransportCfgEntry .1.3.6.1.4.1.2281.10.7.6.1 |
genEquipRadioPtpTransportCfgEntryPTP optimized transport channel configuration table. GenEquipRadioPtpTransportCfgEntry .1.3.6.1.4.1.2281.10.7.6.1.1 |
genEquipRadioPtpTransportChannelAdminPTP optimized transport admin.rw EnableDisable .1.3.6.1.4.1.2281.10.7.6.1.1.1 |
genEquipRadioPtpTransportChannelModePTP optimized transport operational mode.rw Enumeration .1.3.6.1.4.1.2281.10.7.6.1.1.2 |
genEquipRadioPtpTransportCountersTablePTP optimized transport channel counters table. SEQUENCE OF GenEquipRadioPtpTransportCountersEntry .1.3.6.1.4.1.2281.10.7.6.2 |
genEquipRadioPtpTransportCountersEntryPTP optimized transport channel counters table. GenEquipRadioPtpTransportCountersEntry .1.3.6.1.4.1.2281.10.7.6.2.1 |
genEquipRadioPtpTransportTxFramesPTP optimized transport TX frames.ro INTEGER .1.3.6.1.4.1.2281.10.7.6.2.1.1 |
genEquipRadioPtpTransportTxDroppedFramesPTP optimized transport TX dropped frames.ro INTEGER .1.3.6.1.4.1.2281.10.7.6.2.1.2 |
genEquipRadioPtpTransportTxBytesPTP optimized transport TX bytes.ro INTEGER .1.3.6.1.4.1.2281.10.7.6.2.1.3 |
genEquipRadioPtpTransportTxDroppedBytesPTP optimized transport TX dropped bytes.ro INTEGER .1.3.6.1.4.1.2281.10.7.6.2.1.4 |
genEquipRadioPtpTransportRxFramesPTP optimized transport RX frames.ro INTEGER .1.3.6.1.4.1.2281.10.7.6.2.1.5 |
genEquipRadioPtpTransportRxBytesPTP optimized transport RX bytes.ro INTEGER .1.3.6.1.4.1.2281.10.7.6.2.1.6 |
genEquipRadioCutThrough OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.7 |
genEquipRadioCutThroughCfgTableCut through configuration table. SEQUENCE OF GenEquipRadioCutThroughCfgEntry .1.3.6.1.4.1.2281.10.7.7.1 |
genEquipRadioCutThroughCfgEntryCut through configuration table. GenEquipRadioCutThroughCfgEntry .1.3.6.1.4.1.2281.10.7.7.1.1 |
genEquipRadioCutThroughChannelAdminEnable/Disable cut through mode.rw EnableDisable .1.3.6.1.4.1.2281.10.7.7.1.1.1 |
genEquipRadioCutThroughCountersTableCut through mode counters table. SEQUENCE OF GenEquipRadioCutThroughCountersEntry .1.3.6.1.4.1.2281.10.7.7.2 |
genEquipRadioCutThroughCountersEntryCut through mode counters table. GenEquipRadioCutThroughCountersEntry .1.3.6.1.4.1.2281.10.7.7.2.1 |
genEquipRadioCutThroughTxFramesCut through TX frames.ro INTEGER .1.3.6.1.4.1.2281.10.7.7.2.1.1 |
genEquipRadioCutThroughTxBytesCut through TX bytes.ro INTEGER .1.3.6.1.4.1.2281.10.7.7.2.1.2 |
genEquipRadioCutThroughRxFramesCut through RX frames.ro INTEGER .1.3.6.1.4.1.2281.10.7.7.2.1.3 |
genEquipRadioCutThroughRxBytesCut through RX bytes.ro INTEGER .1.3.6.1.4.1.2281.10.7.7.2.1.4 |
genEquipRadioGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.8 |
genEquipRadioGroupsProtection OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.8.1 |
genEquipRadioGroupsProtectionAttrTableThis table contains the attributes of the radio protection groups. SEQUENCE OF GenEquipRadioGroupsProtectionAttrEntry .1.3.6.1.4.1.2281.10.7.8.1.1 |
genEquipRadioGroupsProtectionAttrEntryThis table entry contains the attributes of the radio protection groups. GenEquipRadioGroupsProtectionAttrEntry .1.3.6.1.4.1.2281.10.7.8.1.1.1 |
genEquipRadioGroupsProtectionAttrGroupIfIndexThe location of the groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.1.1.1 |
genEquipRadioGroupsProtectionAttrGroupIdThe Id of the radio protection group.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.1.1.1.2 |
genEquipRadioGroupsProtectionAttrCommandRadio protection user commands for maintenance purposes: force-switch, lockout and manual-switch.rw RadioProtectionCmd .1.3.6.1.4.1.2281.10.7.8.1.1.1.3 |
genEquipRadioGroupsProtectionAttrCopyToMateCopy to mate command that copies the configuration from one radio to another in order to achieve configuration alignment.rw OffOn .1.3.6.1.4.1.2281.10.7.8.1.1.1.4 |
genEquipRadioGroupsProtectionAttrCopyToMateSourceIfIndexThe radio location which is required to be the source of configuration for copy-to-mate command.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.1.1.1.5 |
genEquipRadioGroupsProtectionAttrRevertiveAdminEnable or disable revertive mode of radio protection.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.1.1.1.6 |
genEquipRadioGroupsProtectionAttrRevertivePrimaryIfIndexThe radio which the system is required to revert to.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.1.1.1.7 |
genEquipRadioGroupsProtectionMembersTableThis table contains the radio protection groups members. SEQUENCE OF GenEquipRadioGroupsProtectionMembersEntry .1.3.6.1.4.1.2281.10.7.8.1.2 |
genEquipRadioGroupsProtectionMembersEntryThis table entry contains the radio protection groups members. GenEquipRadioGroupsProtectionMembersEntry .1.3.6.1.4.1.2281.10.7.8.1.2.1 |
genEquipRadioGroupsProtectionMembersIfIndexGroupThe location of the radio protection groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.2.1.1 |
genEquipRadioGroupsProtectionMembersGroupIdThe Id of the radio protection group.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.2.1.2 |
genEquipRadioGroupsProtectionMembersMem1IfIndexThe radio location of member 1.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.1.2.1.3 |
genEquipRadioGroupsProtectionMembersMem2IfIndexThe radio location of member 2.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.1.2.1.4 |
genEquipRadioGroupsProtectionMembersRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.7.8.1.2.1.30 |
genEquipRadioGroupsProtectionStatusTableThis table contains the status of the radio protection. SEQUENCE OF GenEquipRadioGroupsProtectionStatusEntry .1.3.6.1.4.1.2281.10.7.8.1.3 |
genEquipRadioGroupsProtectionStatusEntryThis table entry contains the status of the radio protection. GenEquipRadioGroupsProtectionStatusEntry .1.3.6.1.4.1.2281.10.7.8.1.3.1 |
genEquipRadioGroupsProtectionStatusGroupIfIndexThe location of the groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.3.1.1 |
genEquipRadioGroupsProtectionStatusActiveIfIndexThe active radio locationro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.3.1.2 |
genEquipRadioGroupsProtectionStatusStandbyIfIndexThe standby radio location.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.3.1.3 |
genEquipRadioGroupsProtectionStatusLockoutThe radio location of member 1.ro NoYes .1.3.6.1.4.1.2281.10.7.8.1.3.1.4 |
genEquipRadioGroupsProtectionBBSSD OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.8.1.10 |
genEquipRadioGroupsProtectionBBSSDAttrTableThis table contains the BBS-SD attributes of the radio protection groups. SEQUENCE OF GenEquipRadioGroupsProtectionBBSSDAttrEntry .1.3.6.1.4.1.2281.10.7.8.1.10.1 |
genEquipRadioGroupsProtectionBBSSDAttrEntryThis table entry contains the BBS-SD attributes of the radio protection groups. GenEquipRadioGroupsProtectionBBSSDAttrEntry .1.3.6.1.4.1.2281.10.7.8.1.10.1.1 |
genEquipRadioGroupsProtectionBBSSDAttrGroupIfIndexThe location of the groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.10.1.1.1 |
genEquipRadioGroupsProtectionBBSSDAttrRevertiveEnable or disable revertive mode for BBS-SD Rx switch.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.1.10.1.1.2 |
genEquipRadioGroupsProtectionBBSSDAttrClrSwCntClear BBS-SD Rx switch counter.rw OffOn .1.3.6.1.4.1.2281.10.7.8.1.10.1.1.3 |
genEquipRadioGroupsProtectionBBSSDAttrFWAutoEnable or disable automatic Rx switching in BBS-SD.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.1.10.1.1.4 |
genEquipRadioGroupsProtectionBBSSDStatusTableThis table contains the BBS-SD status of the radio protection groups. SEQUENCE OF GenEquipRadioGroupsProtectionBBSSDStatusEntry .1.3.6.1.4.1.2281.10.7.8.1.10.2 |
genEquipRadioGroupsProtectionBBSSDStatusEntryThis table entry contains the BBS-SD status of the radio protection groups. GenEquipRadioGroupsProtectionBBSSDStatusEntry .1.3.6.1.4.1.2281.10.7.8.1.10.2.1 |
genEquipRadioGroupsProtectionBBSSDStatusGroupIfIndexThe location of the groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.10.2.1.1 |
genEquipRadioGroupsProtectionBBSSDStatusAbcGroupIfIndexThe attached MC-ABC group if_index.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.10.2.1.2 |
genEquipRadioGroupsProtectionBBSSDStatusActiveRxQualityThe active MC-ABC channel quality.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.10.2.1.3 |
genEquipRadioGroupsProtectionBBSSDStatusActiveRxRadioIfIndexThe active rx radio if_index.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.10.2.1.4 |
genEquipRadioGroupsProtectionBBSSDStatusActiveTxRadioIfIndexThe active Tx radio if_index.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.10.2.1.5 |
genEquipRadioGroupsProtectionBBSSDStatusLockoutIndicates whether the radio protection is currently in lockout.ro NoYes .1.3.6.1.4.1.2281.10.7.8.1.10.2.1.6 |
genEquipRadioGroupsProtectionBBSSDStatusRxChIdThe attached MC-ABC channel ID.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.10.2.1.7 |
genEquipRadioGroupsProtectionBBSSDStatusStdbyRxQualityThe standby MC-ABC channel quality.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.10.2.1.8 |
genEquipRadioGroupsProtectionBBSSDStatusStdbyRxRadioIfIndexThe standby rx radio if_index.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.10.2.1.9 |
genEquipRadioGroupsProtectionBBSSDStatusStandbyTxRadioIfIndexThe standby Tx radio if_index.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.1.10.2.1.10 |
genEquipRadioGroupsXpic OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.8.2 |
genEquipRadioGroupsXPICAttrTableThis table contains the configuration of the radio XPIC groups. SEQUENCE OF GenEquipRadioGroupsXPICAttrEntry .1.3.6.1.4.1.2281.10.7.8.2.1 |
genEquipRadioGroupsXPICAttrEntryThis table entry contains the configuration of the radio XPIC groups. GenEquipRadioGroupsXPICAttrEntry .1.3.6.1.4.1.2281.10.7.8.2.1.1 |
genEquipRadioGroupsXPICAttrGroupIfIndexThe location of the group.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.2.1.1.1 |
genEquipRadioGroupsXPICAttrCopyToMateSourceIfIndexThe radio location which is required to be the source of configuration for copy-to-mate command.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.2.1.1.2 |
genEquipRadioGroupsXPICAttrGroupIdXPIC group id.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.2.1.1.3 |
genEquipRadioGroupsXPICAttrXRSMAdminAdministrative state of XPIC recovery state machine.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.2.1.1.4 |
genEquipRadioGroupsXPICAttrAdminAdministrative state of XPIC.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.2.1.1.5 |
genEquipRadioGroupsXPICAttrCopyToMateUser Command to resolve the mismatch between the two carriers in the XPIC group.rw Copy2mate .1.3.6.1.4.1.2281.10.7.8.2.1.1.6 |
genEquipRadioGroupsXPICMembersTableThis table contains the radio XPIC groups members. SEQUENCE OF GenEquipRadioGroupsXPICMembersEntry .1.3.6.1.4.1.2281.10.7.8.2.2 |
genEquipRadioGroupsXPICMembersEntryThis table entry contains the radio XPIC groups members. GenEquipRadioGroupsXPICMembersEntry .1.3.6.1.4.1.2281.10.7.8.2.2.1 |
genEquipRadioGroupsXPICMembersIfIndexGroupThe location of the radio XPIC group.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.2.2.1.1 |
genEquipRadioGroupsXPICMembersMem1IfIndexThe radio location of member 1.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.2.2.1.2 |
genEquipRadioGroupsXPICMembersMem2IfIndexThe radio location of member 2.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.2.2.1.3 |
genEquipRadioGroupsXPICMembersRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.7.8.2.2.1.30 |
genEquipRadioGroupsXPICStatusTableThis table contains the status of the XPIC. SEQUENCE OF GenEquipRadioGroupsXPICStatusEntry .1.3.6.1.4.1.2281.10.7.8.2.3 |
genEquipRadioGroupsXPICStatusEntryThis table entry contains the status of the XPIC. GenEquipRadioGroupsXPICStatusEntry .1.3.6.1.4.1.2281.10.7.8.2.3.1 |
genEquipRadioGroupsXPICStatusGroupIfIndexThe location of the groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.2.3.1.1 |
genEquipRadioGroupsXPICStatusStateThe state of XPIC State Machinero XpicState .1.3.6.1.4.1.2281.10.7.8.2.3.1.2 |
genEquipRadioGroupsMR OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.8.3 |
genEquipRadioGroupsMRAttrTableMR config table. SEQUENCE OF GenEquipRadioGroupsMRAttrEntry .1.3.6.1.4.1.2281.10.7.8.3.1 |
genEquipRadioGroupsMRAttrEntryMR config table entry. GenEquipRadioGroupsMRAttrEntry .1.3.6.1.4.1.2281.10.7.8.3.1.1 |
genEquipRadioGroupsMRAttrGroupIfIndexThe location of the groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.3.1.1.1 |
genEquipRadioGroupsMRAttrGroupIdThe Id of the radio MR group.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.3.1.1.2 |
genEquipRadioGroupsMRAttrAdminMR Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.3.1.1.3 |
genEquipRadioGroupsMRAttrBlockRadioIfindexBlock Radio ifindex.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.3.1.1.4 |
genEquipRadioGroupsMRAttrBlockRadioAdminBlock Radio Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.3.1.1.5 |
genEquipRadioGroupsMRAttrCopy2MateIfindexCopy2mate Radio ifindex.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.3.1.1.6 |
genEquipRadioGroupsMRAttrCopy2MateAdminCopy2Mate Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.3.1.1.7 |
genEquipRadioGroupsMRAttrExBerAdminExcessive BER Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.3.1.1.8 |
genEquipRadioGroupsMRAttrMinNumRadioMinimal num of radios.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.3.1.1.9 |
genEquipRadioGroupsMRAttrMinProfileAdminMin ACM profile admin.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.3.1.1.10 |
genEquipRadioGroupsMRAttrSigDegardeAdminSignal Degrade Admin.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.3.1.1.11 |
genEquipRadioGroupsMRMembersTableMR members table. SEQUENCE OF GenEquipRadioGroupsMRMembersEntry .1.3.6.1.4.1.2281.10.7.8.3.2 |
genEquipRadioGroupsMRMembersEntryMR members table entry. GenEquipRadioGroupsMRMembersEntry .1.3.6.1.4.1.2281.10.7.8.3.2.1 |
genEquipRadioGroupsMRMembersIfIndexGroupThe location of the radio MR groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.3.2.1.1 |
genEquipRadioGroupsMRMembersMem1IfIndexThe radio location of member 1.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.3.2.1.2 |
genEquipRadioGroupsMRMembersMem2IfIndexThe radio location of member 2.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.3.2.1.3 |
genEquipRadioGroupsMRMembersRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.7.8.3.2.1.30 |
genEquipRadioGroupsMRStatusTableMR Status table. SEQUENCE OF GenEquipRadioGroupsMRStatusEntry .1.3.6.1.4.1.2281.10.7.8.3.3 |
genEquipRadioGroupsMRStatusEntryMR Status table entry. GenEquipRadioGroupsMRStatusEntry .1.3.6.1.4.1.2281.10.7.8.3.3.1 |
genEquipRadioGroupsMRStatusGroupIfIndexThe location of the groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.3.3.1.1 |
genEquipRadioGroupsMRStatusOpertionalStateOperational Statero INTEGER .1.3.6.1.4.1.2281.10.7.8.3.3.1.2 |
genEquipRadioGroupsMRStatusRemoteOpertionalStateRemote Operational State.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.3.3.1.3 |
genEquipRadioGroupsMIMO OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.8.4 |
genEquipRadioGroupsMIMOAttrTableThe configuration table of the MIMO groups. SEQUENCE OF GenEquipRadioGroupsMIMOAttrEntry .1.3.6.1.4.1.2281.10.7.8.4.1 |
genEquipRadioGroupsMIMOAttrEntryThe configuration table of the MIMO groups entry. GenEquipRadioGroupsMIMOAttrEntry .1.3.6.1.4.1.2281.10.7.8.4.1.1 |
genEquipRadioGroupsMIMOAttrGroupIfIndexMIMO configuration table indexro INTEGER .1.3.6.1.4.1.2281.10.7.8.4.1.1.1 |
genEquipRadioGroupsMIMOAttrRoleRole can be Master or Slave.rw Enumeration .1.3.6.1.4.1.2281.10.7.8.4.1.1.2 |
genEquipRadioGroupsMIMOAttrAdminAdministrating state of the MIMO group.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.4.1.1.3 |
genEquipRadioGroupsMIMOAttrResetStateMachineReset MIMO state machine.rw OffOn .1.3.6.1.4.1.2281.10.7.8.4.1.1.4 |
genEquipRadioGroupsMIMOMembersTableThe description the radio carrier members of the MIMO groups. SEQUENCE OF GenEquipRadioGroupsMIMOMembersEntry .1.3.6.1.4.1.2281.10.7.8.4.2 |
genEquipRadioGroupsMIMOMembersEntryThe description the radio carrier members of the MIMO groups entry. GenEquipRadioGroupsMIMOMembersEntry .1.3.6.1.4.1.2281.10.7.8.4.2.1 |
genEquipRadioGroupsMIMOMembersGroupIfIndexMIMO members table indexro INTEGER .1.3.6.1.4.1.2281.10.7.8.4.2.1.1 |
genEquipRadioGroupsMIMOMembersGroupTypeType of MIMO group: 2x2 or 4x4 etc...rw Enumeration .1.3.6.1.4.1.2281.10.7.8.4.2.1.2 |
genEquipRadioGroupsMIMOMembersMem1IfIndexThe radio location of member 1.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.4.2.1.3 |
genEquipRadioGroupsMIMOMembersMem2IfIndexThe radio location of member 2.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.4.2.1.4 |
genEquipRadioGroupsMIMOMembersMem3IfIndexThe radio location of member 3.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.4.2.1.5 |
genEquipRadioGroupsMIMOMembersMem4IfIndexThe radio location of member 4.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.4.2.1.6 |
genEquipRadioGroupsMIMOMembersRowStatusRow status to allow user add entries dynamically.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.7.8.4.2.1.30 |
genEquipRadioGroupsMIMOStatusTableThe current status table of the MIMO groups. SEQUENCE OF GenEquipRadioGroupsMIMOStatusEntry .1.3.6.1.4.1.2281.10.7.8.4.3 |
genEquipRadioGroupsMIMOStatusEntryThe current status table of the MIMO groups entry. GenEquipRadioGroupsMIMOStatusEntry .1.3.6.1.4.1.2281.10.7.8.4.3.1 |
genEquipRadioGroupsMIMOStatusGroupIfIndexMIMO status table indexro INTEGER .1.3.6.1.4.1.2281.10.7.8.4.3.1.1 |
genEquipRadioGroupsMIMOStatusStateMIMO-Statero Enumeration .1.3.6.1.4.1.2281.10.7.8.4.3.1.2 |
genEquipRadioGroupsMIMOStatus1stMMIMIMO interference in dB of the 1st carrier.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.4.3.1.3 |
genEquipRadioGroupsMIMOStatus2ndMMIMIMO interference in dB of the 2nd carrier.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.4.3.1.4 |
genEquipRadioGroupsMIMOStatus3rdMMIMIMO interference in dB of the 3rd carrier.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.4.3.1.5 |
genEquipRadioGroupsMIMOStatus4thMMIMIMO interference in dB of the 4th carrier.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.4.3.1.6 |
genEquipRadioGroupsMIMOStatusAdvancedStateMIMO advanced state.ro Enumeration .1.3.6.1.4.1.2281.10.7.8.4.3.1.7 |
genEquipRadioGroupsAbc OBJECT IDENTIFIER .1.3.6.1.4.1.2281.10.7.8.5 |
genEquipRadioGroupsAbcAttrTableMulti Carrier ABC configuration table. SEQUENCE OF GenEquipRadioGroupsAbcAttrEntry .1.3.6.1.4.1.2281.10.7.8.5.1 |
genEquipRadioGroupsAbcAttrEntryMulti Carrier ABC configuration table. GenEquipRadioGroupsAbcAttrEntry .1.3.6.1.4.1.2281.10.7.8.5.1.1 |
genEquipRadioGroupsAbcAttrIfIndexThe interface-index of the ABC groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.1.1.1 |
genEquipRadioGroupsAbcAttrGroupNameTextual description of the ABC group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2281.10.7.8.5.1.1.2 |
genEquipRadioGroupsAbcAttrAdminStateThe Administrative state of ABC radio group which decides if the Multi Carrier ABC group is enabled or disabled.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.5.1.1.3 |
genEquipRadioGroupsAbcAttrQnumberOfRadioMembersThe number of radios that can be members of the Multi Carrier ABC group.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.1.1.4 |
genEquipRadioGroupsAbcAttrProtectionEnableWhen Protection is Enabled protecion groups can be added to the Multi-carrier ABC group.
When disabled regular channels can be attached.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.5.1.1.5 |
genEquipRadioGroupsAbcAttrHighPriEthernetBandwidthBandwidth reserved for high priority ethernet in Kbps.
Values range from from 0 (i.e. No high pri ethernet) to max capacity (I.e. no STM-1s) in Kbps.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.1.1.6 |
genEquipRadioGroupsAbcAttrQualityThresholdMembers degrading below this threshold will be set to 'do not use' in the group.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.1.1.7 |
genEquipRadioGroupsAbcAttrRowStatusThis is the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2281.10.7.8.5.1.1.30 |
genEquipRadioGroupsAbcMembersTableMulti Carrier ABC members table. SEQUENCE OF GenEquipRadioGroupsAbcMembersEntry .1.3.6.1.4.1.2281.10.7.8.5.2 |
genEquipRadioGroupsAbcMembersEntryMulti Carrier ABC members table entry. GenEquipRadioGroupsAbcMembersEntry .1.3.6.1.4.1.2281.10.7.8.5.2.1 |
genEquipRadioGroupsAbcMembersGroupIfIndexInteger representing the group interface ifindexro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.2.1.1 |
genEquipRadioGroupsAbcMembersGroupIdInteger representing the group interface ID.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.2.1.2 |
genEquipRadioGroupsAbcMembersChannel1MemberIfIndexIfIndex representing the group member connect to this ABC channel.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.2.1.3 |
genEquipRadioGroupsAbcMembersChannel1adminStateThe Administrative state of an ABC channel.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.5.2.1.4 |
genEquipRadioGroupsAbcMembersChannel2MemberIfIndexIfIndex representing the group member connect to this ABC channel.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.2.1.5 |
genEquipRadioGroupsAbcMembersChannel2adminStateThe Administrative state of an ABC channel.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.5.2.1.6 |
genEquipRadioGroupsAbcMembersChannel3MemberIfIndexIfIndex representing the group member connect to this ABC channel.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.2.1.7 |
genEquipRadioGroupsAbcMembersChannel3adminStateThe Administrative state of an ABC channel.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.5.2.1.8 |
genEquipRadioGroupsAbcMembersChannel4MemberIfIndexIfIndex representing the group member connect to this ABC channel.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.2.1.9 |
genEquipRadioGroupsAbcMembersChannel4adminStateThe Administrative state of an ABC channel.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.5.2.1.10 |
genEquipRadioGroupsAbcMembersChannel5MemberIfIndexIfIndex representing the group member connect to this ABC channel.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.2.1.11 |
genEquipRadioGroupsAbcMembersChannel5adminStateThe Administrative state of an ABC channel.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.5.2.1.12 |
genEquipRadioGroupsAbcMembersChannel6MemberIfIndexIfIndex representing the group member connect to this ABC channel.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.2.1.13 |
genEquipRadioGroupsAbcMembersChannel6adminStateThe Administrative state of an ABC channel.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.5.2.1.14 |
genEquipRadioGroupsAbcMembersChannel7MemberIfIndexIfIndex representing the group member connect to this ABC channel.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.2.1.15 |
genEquipRadioGroupsAbcMembersChannel7adminStateThe Administrative state of an ABC channel.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.5.2.1.16 |
genEquipRadioGroupsAbcMembersChannel8MemberIfIndexIfIndex representing the group member connect to this ABC channel.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.2.1.17 |
genEquipRadioGroupsAbcMembersChannel8adminStateThe Administrative state of an ABC channel.rw EnableDisable .1.3.6.1.4.1.2281.10.7.8.5.2.1.18 |
genEquipRadioGroupsAbcStatusTableMulti Carrier ABC status table. SEQUENCE OF GenEquipRadioGroupsAbcStatusEntry .1.3.6.1.4.1.2281.10.7.8.5.3 |
genEquipRadioGroupsAbcStatusEntryMulti Carrier ABC status table entry. GenEquipRadioGroupsAbcStatusEntry .1.3.6.1.4.1.2281.10.7.8.5.3.1 |
genEquipRadioGroupsAbcStatusIfIndexThe interface-index of the ABC groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.1 |
genEquipRadioGroupsAbcStatusOperStateThe operational state of the ABC group as a WAN.ro DownUp .1.3.6.1.4.1.2281.10.7.8.5.3.1.2 |
genEquipRadioGroupsAbcStatusRemoteOperStateThe remote ABC groups operational state.ro DownUp .1.3.6.1.4.1.2281.10.7.8.5.3.1.3 |
genEquipRadioGroupsAbcStatusCurrentAggregatedCapacityRXThe combined current RX throughput capacity of the ABC group in Kbps.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.4 |
genEquipRadioGroupsAbcStatusCurrentAggregatedCapacityTXThe combined current TX throughput capacity of the ABC group in Kbps.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.5 |
genEquipRadioGroupsAbcStatusChannel1OperstateThe operational state of the ABC channel.ro DownUp .1.3.6.1.4.1.2281.10.7.8.5.3.1.6 |
genEquipRadioGroupsAbcStatusChannel1CapacityThe current throughput capacity of the ABC channel in Kbps.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.7 |
genEquipRadioGroupsAbcStatusChannel2OperstateThe operational state of the ABC channel.ro DownUp .1.3.6.1.4.1.2281.10.7.8.5.3.1.8 |
genEquipRadioGroupsAbcStatusChannel2CapacityThe current throughput capacity of the ABC channel in Kbps.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.9 |
genEquipRadioGroupsAbcStatusChannel3OperStateThe operational state of the ABC channel.ro DownUp .1.3.6.1.4.1.2281.10.7.8.5.3.1.10 |
genEquipRadioGroupsAbcStatusChannel3CapacityThe current throughput capacity of the ABC channel in Kbps.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.11 |
genEquipRadioGroupsAbcStatusChannel4OperStateThe operational state of the ABC channel.ro DownUp .1.3.6.1.4.1.2281.10.7.8.5.3.1.12 |
genEquipRadioGroupsAbcStatusChannel4CapacityThe current throughput capacity of the ABC channel in Kbps.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.13 |
genEquipRadioGroupsAbcStatusChannel5OperStateThe operational state of the ABC channel.ro DownUp .1.3.6.1.4.1.2281.10.7.8.5.3.1.14 |
genEquipRadioGroupsAbcStatusChannel5CapacityThe current throughput capacity of the ABC channel in Kbps.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.15 |
genEquipRadioGroupsAbcStatusChannel6OperStateThe operational state of the ABC channel.ro DownUp .1.3.6.1.4.1.2281.10.7.8.5.3.1.16 |
genEquipRadioGroupsAbcStatusChannel6CapacityThe current throughput capacity of the ABC channel in Kbps.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.17 |
genEquipRadioGroupsAbcStatusChannel7OperStateThe operational state of the ABC channel.ro DownUp .1.3.6.1.4.1.2281.10.7.8.5.3.1.18 |
genEquipRadioGroupsAbcStatusChannel7CapacityThe current throughput capacity of the ABC channel in Kbps.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.19 |
genEquipRadioGroupsAbcStatusChannel8OperStateThe operational state of the ABC channel.ro DownUp .1.3.6.1.4.1.2281.10.7.8.5.3.1.20 |
genEquipRadioGroupsAbcStatusChannel8CapacityThe current throughput capacity of the ABC channel in Kbps.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.3.1.21 |
genEquipStm1AbcAttrTableMulti Carrier ABC stm1 table. SEQUENCE OF GenEquipStm1AbcAttrEntry .1.3.6.1.4.1.2281.10.7.8.5.5 |
genEquipStm1AbcAttrEntryMulti Carrier ABC stm1 table entry. GenEquipStm1AbcAttrEntry .1.3.6.1.4.1.2281.10.7.8.5.5.1 |
genEquipStm1AbcAttrIfIndexThe interface-index of the ABC groupro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.5.1.1 |
genEquipStm1AbcAttrGroupIdInteger representing the group interface ID.ro INTEGER .1.3.6.1.4.1.2281.10.7.8.5.5.1.2 |
genEquipStm1AbcAttrNumberOfMembersThe number of STM-1/OC-3 channels that can be members of the Multi Carrier ABC group.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.5.1.3 |
genEquipStm1AbcAttrPri1IfIndexLocation of the highest priority STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.5.1.4 |
genEquipStm1AbcAttrPri2IfIndexLocation of the highest priority STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.5.1.5 |
genEquipStm1AbcAttrPri3IfIndexLocation of the highest priority STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.5.1.6 |
genEquipStm1AbcAttrPri4IfIndexLocation of the highest priority STM-1/OC-3 interface.rw INTEGER .1.3.6.1.4.1.2281.10.7.8.5.5.1.7 |