MP-IPV6-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MP-IPV6-MIB.
15
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
mpIpv6 OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.131 |
RFC1213-MIB Unknown .1.3.6.1.4.1.119.2.3.3.13.131 |
mpIpv6PingTableThe table of ping6 management information relevant to
this entity's ICMPv6 echo identifier. SEQUENCE OF MpIpv6PingEntry .1.3.6.1.4.1.119.2.3.3.13.131.1 |
mpIpv6PingEntryThe ping6 management information for one of this
entity's ICMPv6 echo identifier. MpIpv6PingEntry .1.3.6.1.4.1.119.2.3.3.13.131.1.1 |
mpIpv6PingIdThis is the index to identify the ping6 entry.
The value of this index must be assigned uniquely,
within the range of 1 - 65535.
But generable ping entry is four simultaneously.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.131.1.1.1 |
mpIpv6PingTargetThe value of this object is the destination IPv6
address for this entry. This IPv6 address must
always be a unicast IPv6 address.rw Ipv6Address .1.3.6.1.4.1.119.2.3.3.13.131.1.1.2 |
mpIpv6PingTargetSiteIdThe value of this object is the site id to which the
destination belong, within the range of 1 - 8.(1 is default site.)
it is necessary to set up this value, Only when a
site local address is specified to be mpIpv6PingTarget.
this value can be omitted and 1 is set up when it omits.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.131.1.1.3 |
mpIpv6PingRequestSendThe value of this object is the ping6 request
number of the times, within the range of 1 - 65535(default 1).ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.131.1.1.4 |
mpIpv6PingDataLengthThe value of this object is the ping6 data
length, within the range of 0 - 65507(default 64).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.131.1.1.5 |
mpIpv6PingSendHopLimitThe value of this object is the HOP LIMIT value in
ping6 packet, within the range of 1 - 255(default 64).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.131.1.1.6 |
mpIpv6PingSendTimeOutThe value of this object is the ping6 time out
value, within the range of 1 - 60 seconds(default 1).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.131.1.1.7 |
mpIpv6PingSendInterfaceThe value of this object is ifIndex. IPv6 address
assigned ifIndex is set as source IPv6 address in
ping6 packets.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.131.1.1.8 |
mpIpv6PingStatusThis object refers to the ping6 entry status.
When this object is set to create(1), ping6
entry is created. Set to inProgress(2), ping6
is Started. When a reply or icmpv6 error
receiveed and time out occured, the status
become complete(3). This object can not set to
complete(3). Set to destroy(4), entry is deleted.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.131.1.1.9 |
mpIpv6PingResultThis object refers to the ping6 result status.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.131.1.1.10 |
mpIpv6PingErrorSourceAddressThis value of this object is the error source
IPv6 address in icmpv6 error reply message.ro Ipv6Address .1.3.6.1.4.1.119.2.3.3.13.131.1.1.11 |