NECSW-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for NECSW-MIB.
1148
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
1148 total| Object Name |
|---|
org OBJECT IDENTIFIER .1.3 |
SNMPv2-TC Unknown .1.3 |
dod OBJECT IDENTIFIER .1.3.6 |
internet OBJECT IDENTIFIER .1.3.6.1 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
nec OBJECT IDENTIFIER .1.3.6.1.4.1.119 |
necProduct OBJECT IDENTIFIER .1.3.6.1.4.1.119.1 |
datax OBJECT IDENTIFIER .1.3.6.1.4.1.119.1.3 |
mmpf OBJECT IDENTIFIER .1.3.6.1.4.1.119.1.3.13 |
mmn9110 OBJECT IDENTIFIER .1.3.6.1.4.1.119.1.3.13.1 |
returnedToOldFiles} TRAP-TYPE .1.3.6.1.4.1.119.1.3.13.1.0.200001 |
supervisorLogin} TRAP-TYPE .1.3.6.1.4.1.119.1.3.13.1.0.1280001 |
supervisorLoginFailure} TRAP-TYPE .1.3.6.1.4.1.119.1.3.13.1.0.1280002 |
supervisorExit} TRAP-TYPE .1.3.6.1.4.1.119.1.3.13.1.0.1281001 |
mmn9120 OBJECT IDENTIFIER .1.3.6.1.4.1.119.1.3.13.2 |
ix5005 OBJECT IDENTIFIER .1.3.6.1.4.1.119.1.3.13.3 |
ix5003 OBJECT IDENTIFIER .1.3.6.1.4.1.119.1.3.13.4 |
nec-mib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2 |
necProductDepend OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3 |
datax-mib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3 |
mmpf-mib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13 |
mpSystem OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.1 |
mpSysSoftwareVersionIndicates the software version number of
this equipmentro DisplayString .1.3.6.1.4.1.119.2.3.3.13.1.1 |
mpSysTimeIt is used to set the date and time to the
realtime clock of this equipmentrw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.1.2 |
mpSysFanTableIndicates the table of the FAN information
of this equipment. SEQUENCE OF MpSysFanEntry .1.3.6.1.4.1.119.2.3.3.13.1.3 |
mpSysFanEntryIndicates the entry of the FAN information
of this equipment. MpSysFanEntry .1.3.6.1.4.1.119.2.3.3.13.1.3.1 |
mpSysFanIndexIndicates the index value to identify the
FAN in the equipment uniquely.
If machine is 9110, the range is '1' to '6'.
If machine is 9120, the range is '1' to '10'.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.1.3.1.1 |
mpSysFanTypeIndicates the character string which
describes the FAN type.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.1.3.1.2 |
mpSysFanStatusIndicates the status of the FAN operation.
If it is set to '1', the FAN operation is
normal. If it is set to '2', the FAN
operation is abnormal.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.1.3.1.3 |
mpSysVoltageTableIndicates the information of the voltages of the
equipment. SEQUENCE OF MpSysVoltageEntry .1.3.6.1.4.1.119.2.3.3.13.1.4 |
mpSysVoltageEntryIndicates the entry of the information of the
voltages of the equipment. MpSysVoltageEntry .1.3.6.1.4.1.119.2.3.3.13.1.4.1 |
mpSysVoltagePackageIndexIndicates the Index value to identify the COM
Package in the equipment uniquely.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.1.4.1.1 |
mpSysVoltageIndexIndicates the index value to identify uniquely the
voltage provided by the power unit of the equipment.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.1.4.1.2 |
mpSysVoltageTypeIndicates the character string which describes the
power unit type and com type.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.1.4.1.3 |
mpSysVoltageReadingIndicates the observed voltage, in milli-volt (mV).ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.1.4.1.4 |
mpSysVoltageStatusIndicates the statsus of the voltage. If it is set
to '1', the voltage is within the normal range. If
it is set to '2', the voltage is in the abnormal
range.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.1.4.1.5 |
mpSysTempTableIndicates the table of the Temperature information
of this equipment. SEQUENCE OF MpSysTempEntry .1.3.6.1.4.1.119.2.3.3.13.1.5 |
mpSysTempEntryIndicates the entry of the information of the
temperature of the equipment. MpSysTempEntry .1.3.6.1.4.1.119.2.3.3.13.1.5.1 |
mpSysTempPackageIndexIndicates the Index value to identify the COM
Package in the equipment uniquely.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.1.5.1.1 |
mpSysTempTypeIndicates the character string which describes the
com unit type.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.1.5.1.2 |
mpSysTempStatusIndicates the status of the temperature of this
equipment inside. If it is set to '1', the
temperature is within the normal temperature
range. If it is set to '2', the temperrature
is in the abnomal range.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.1.5.1.3 |
mpSysTempReadingIndicates the temperature of the equipment
inside, in degree (Celusius).ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.1.5.1.4 |
mpSysTempMinThreshIndicates the temperature of the equipment
inside, in degree (Celusius).ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.1.5.1.5 |
mpSysTempMaxThreshIndicates the higher threshold of the normal
temparature range for the equipment, in
degree (Celsius).ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.1.5.1.6 |
mpSysEqpTableIndicates the table of the outside equipment
information. SEQUENCE OF MpSysEqpEntry .1.3.6.1.4.1.119.2.3.3.13.1.6 |
mpSysEqpEntryIndicates the entry of the outside equipment
information. MpSysEqpEntry .1.3.6.1.4.1.119.2.3.3.13.1.6.1 |
mpSysEqpIndexIndicates the index value to identify the
outside equipment uniquely.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.1.6.1.1 |
mpSysEqpTypeIndicates the character string which describes the
external equipment type.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.1.6.1.2 |
mpSysEqpStatusIndicates the status of the outside equipment
operation. If it is set to '1', the outside
equipment operation is normal. If it is set to
'2', the outside equipment operation is abnormal.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.1.6.1.3 |
mpSysCpuUseTableIndicates the table of the percentage of cpu using
information. SEQUENCE OF MpSysCpuUseEntry .1.3.6.1.4.1.119.2.3.3.13.1.7 |
mpSysCpuUseEntryIndicates the entry of the percentage of cpu using
information. MpSysCpuUseEntry .1.3.6.1.4.1.119.2.3.3.13.1.7.1 |
mpSysCpuUseIndexIndicates the index value to identify the
package in the equipment uniquely.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.1.7.1.1 |
mpSysCpuTimeIndexIndicates the index value to identify the
time collecting percentage of cpu using uniquely.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.1.7.1.2 |
mpSysCpuUseTypeIndicates the character string which describes the
slot type.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.1.7.1.3 |
mpSysCpuTimeTypeIndicates the character string which describes the
time type of collecting percentage of cpu using.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.1.7.1.4 |
mpSysCpuUseIndicates the percentage of cpu using.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.1.7.1.5 |
mpIfCard OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.2 |
mpIfCardTableA table that contains information about interface
card. SEQUENCE OF MpIfCardEntry .1.3.6.1.4.1.119.2.3.3.13.2.1 |
mpIfCardEntryA entry Indicates that contains information about interface
card. MpIfCardEntry .1.3.6.1.4.1.119.2.3.3.13.2.1.1 |
mpIfCardSlotNumberIndicates slot number of the interface card.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.2.1.1.1 |
mpIfCardTypeIndicates kind of the interface card.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.2.1.1.2 |
mpIfCardOperSideIndicates the side which was used for setting upro DisplayString .1.3.6.1.4.1.119.2.3.3.13.2.1.1.3 |
mpIfCardOperVersionIndicates the firmware version in operation.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.2.1.1.4 |
mpIfCardSideAVersionIndicates the firmware version of side A.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.2.1.1.5 |
mpIfCardSideBVersionIndicates the firmware version of side B.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.2.1.1.6 |
mpIfCardBootDpVersionIndicates the firmware version of BOOT/DP.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.2.1.1.7 |
mpEtherPort OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.3 |
mpEtherPortTableIndicates the table of Ether port information. SEQUENCE OF MpEtherPortEntry .1.3.6.1.4.1.119.2.3.3.13.3.1 |
mpEtherPortEntryIndicates the entry of each Ether port's
information. MpEtherPortEntry .1.3.6.1.4.1.119.2.3.3.13.3.1.1 |
mpEtherPortIfIndexIndicates the interface number assigned to the
Ether port uniquely in the equipment. Each Ethernet
port identified by this object is the same Ethernet
port identified by the same number of the ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.3.1.1.1 |
mpEtherPortLoopBackTypeIndicates the type of the Loop-back test. If it is
set to '2', the internal Loop-back test is executed.
The Loop-back test is finished when one test packet
has been sent. If it is set to '1', the Loop-back
testing is not being executed, which means it is in
the normal mode.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.3.1.1.2 |
mpEtherPortModeIndicates the operation mode of the port.
In case of Antomatical mode, the value '1' is set.
In case of HDX10M, the value '2' is set.
In case of FDX10M, the value '3' is set.
In case of HDX100M, the value '4' is set.
In case of FDX100M, the value '5' is set.
In case of HDX1000M, the value '6' is set.
In case of FDX1000M, the value '7' is set.
The default value is '1'.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.3.1.1.3 |
mpEtherPortStatusTableIndicates the table of Ether port status
information. SEQUENCE OF MpEtherPortStatusEntry .1.3.6.1.4.1.119.2.3.3.13.3.2 |
mpEtherPortStatusEntryIndicates the entry of each Ether port's status
information. MpEtherPortStatusEntry .1.3.6.1.4.1.119.2.3.3.13.3.2.1 |
mpEtherPortStsIfIndexIndicates the interface number assigned to the
Ether port uniquely in the equipment. Each Ethernet
port identified by this object is the same Ethernet
port identified by the same number of the ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.3.2.1.1 |
mpEtherPortStsLoopBackResultIndicates the result of the Loop-back test.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.3.2.1.2 |
mpEtherPortStsModeIndicates operation mode of the port.
If it set to '1', operation mode is automatic.
If it set to '2', operation mode is manual.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.3.2.1.3 |
mpEtherPortStsSpeedIndicastes current speed of the port in bps.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.3.2.1.4 |
mpEtherPortStsFullDuplexIndicates which current port status is full-duplex
or half-duplex. If it is set to '1', it is
half-duplex. If it is set to '2', it is
full-duplex.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.3.2.1.5 |
mpVlan OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.4 |
mpVlanModeStatusIndicates to validate the configuration of VLAN
group. It is set to '1' when the configuration will
be valid, after the value of objects had been
modified.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.1 |
mpVlanTableIt is used for VLAN configuration. SEQUENCE OF MpVlanEntry .1.3.6.1.4.1.119.2.3.3.13.4.2 |
mpVlanEntryIndicates the table entry of the VLAN
configuration. MpVlanEntry .1.3.6.1.4.1.119.2.3.3.13.4.2.1 |
mpVlanIndexIndicates the specified number to identify the
VLAN. The lowest number must be assigned to the
default VLAN.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.2.1.1 |
mpVlanRtrIndexIndicates the interface number assigned to the VLAN
uniquely, within the equipment. The VLAN identified
by this object is the same VLAN identified by the
same number of ifIndex. The lowest number must be
assigned to the default VLAN.ro INTEGER -- @008 .1.3.6.1.4.1.119.2.3.3.13.4.2.1.2 |
mpVlanNameIndicates the name which is assigned to the VLAN
for administrative purpose. I is used to assign or
change the name of VLAN. In the initial state, only
'default' is registered as the default VLAN. The
default VLAN name cannot be changed.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.4.2.1.3 |
mpVlanNameStatusNo description.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.2.1.4 |
mpVlanGroupTableThis is the table entry of the VLAN group name
registration. SEQUENCE OF MpVlanGroupEntry .1.3.6.1.4.1.119.2.3.3.13.4.3 |
mpVlanGroupEntryThis is the table entry of the VLAN group name
registration. MpVlanGroupEntry .1.3.6.1.4.1.119.2.3.3.13.4.3.1 |
mpVlanGrpIndexThis is the index to identify VLAN group.
The value of this index and the index mpVlanIndex
must be assigned uniquely,witrhin the range of
2 - 4095.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.3.1.1 |
mpVlanGrpNameThis object is the name defined to this VLAN
Group, for management purpose.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.4.3.1.2 |
mpVlanGrpNameStatusThis object is used to create or delete the entry
of mpVlanGroupTable. The value '1' is set to
create the entry, and the value '2' is set to
delete the entry.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.3.1.3 |
mpVlanBigpipeTableThis is the table type object of BigPipe name
registration. SEQUENCE OF MpVlanBigpipeEntry .1.3.6.1.4.1.119.2.3.3.13.4.4 |
mpVlanBigpipeEntryThis is the entry of the mpVlanBigPipeTable. MpVlanBigpipeEntry .1.3.6.1.4.1.119.2.3.3.13.4.4.1 |
mpVlanBigpipeIndexNo description.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.4.1.1 |
mpVlanBigpipeNameThis is the index to identify the BigPipe. The
value of this index should be within 1 - 6.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.4.4.1.2 |
mpVlanBigpipeNameStatusThis object is used to create or delete the entry
of mpVlanBigPipeTable. The value '1' is set to
create the entry, and the value '2' is set to
delete the entry.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.4.1.3 |
mpVlanBigpipeModeThis object is used to specify the communication
status of BigPipe to VLAN. If the value is set to '1',
frames to/from all VLANs (except VLANs registered
in mpVlanBigpipeVidControlTable) are passed. If the
value is set to '2', frames to/from all VLANs (except
VLANs registered in mpVlanBigpipeVidControlTable)
are filtered. The default value is '1'.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.4.1.4 |
mpVlanIntfTableThis is the table type object of the interface
(Ethernet port and logical ELAN port)
subsucription to VLAN. SEQUENCE OF MpVlanIntfEntry .1.3.6.1.4.1.119.2.3.3.13.4.5 |
mpVlanIntfEntryThis is the table entry of mpVlanIntfTable. MpVlanIntfEntry .1.3.6.1.4.1.119.2.3.3.13.4.5.1 |
mpVlanIntfVlanIndexThis is the index to identify the existing VLAN
to which the interfaces are subscribed. When the
equipment is just shipped from factory, all the
Ethernet ports are subscribed to the default
VLAN.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.5.1.1 |
mpVlanIntfNumberThis is the index to identify the Ethernet port
number or logical ELAN port number subscribed to
this VLAN. The value of this index is the same as
ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.5.1.2 |
mpVlanIntfStatusThis object is used to register or delete the
interface to this VLAN. The value '1' is set to
register the interface to this VLAN, and the value
'2' is set to delete the interface from this VLAN.
When all the interfaces are deleted from this
VLAN, the table entry of this VLAN is also
deleted.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.5.1.3 |
mpVlanGroupIntfTableThis is the table type object of the VLAN
subscription to VLAN Group. SEQUENCE OF MpVlanGroupIntfEntry .1.3.6.1.4.1.119.2.3.3.13.4.6 |
mpVlanGroupIntfEntryThis is the table entry of mpVlanGroupIntfTable. MpVlanGroupIntfEntry .1.3.6.1.4.1.119.2.3.3.13.4.6.1 |
mpVlanGrpIntfIndexThis is the index to identify the existing VLAN
Group to which the VLANs are subscribed.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.6.1.1 |
mpVlanGrpIntfVlanIndexThis is the index to identify the VLAN which is
subscribed to this VLAN Group.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.6.1.2 |
mpVlanGrpIntfStatusThis object is used to register/delete the VLAN
to/from this VLAN Group. The value '1' is set to
register this VLAN to this VLAN Group, and the
value '2' is set to delete this VLAN from this
VLAN Group.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.6.1.3 |
mpVlanBigpipeIntfTableThis is the table type object of the interface
(Ethernet port) subscription to BigPipe. SEQUENCE OF MpVlanBigpipeIntfEntry .1.3.6.1.4.1.119.2.3.3.13.4.7 |
mpVlanBigpipeIntfEntryThis is the table entry of
mpVlanBigPipeIntfTable. MpVlanBigpipeIntfEntry .1.3.6.1.4.1.119.2.3.3.13.4.7.1 |
mpVlanBigpipeIntfIndexThis is the index to identify the existing
BigPipe.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.7.1.1 |
mpVlanBigpipeIntfNumberThis is the index to identify the physical
interface (Ethernet port) number subscribed to
this BigPipe. The value of this index is the same
as the value of ifIndex. The interface which is to
be subscribed to BigPipe must not be subscribedany
VLAN.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.7.1.2 |
mpVlanBigpipeIntfNumberStatusThis object is used to register/delete the
interface (Ethernet port) to/from this BigPipe.
The value '1' is set to register this interface to
this BigPipe, and the value '2' is set to delete
this interface from this BigPipe.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.7.1.3 |
mpVlanMacTableThis is the table type object of MAC address data
of the VLAN. SEQUENCE OF MpVlanMacEntry .1.3.6.1.4.1.119.2.3.3.13.4.8 |
mpVlanMacEntryThis is the table entry of mpVlanMacTable. MpVlanMacEntry .1.3.6.1.4.1.119.2.3.3.13.4.8.1 |
mpVlanMacVlanIndexThis is the index to identify the existing VLAN.
The value of this object is the VLAN number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.8.1.1 |
mpVlanMacAddressThis object is the MAC address which is included
in this VLAN.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.4.8.1.2 |
mpVlanMacIntfNumberThis object is the Ethernet port number or
logical ELAN number, from which the frame with
source MAC address included in this VLAN can be
received.This interface must belong to this VLAN.
This object is set to '0' when no port is
specified.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.8.1.3 |
mpVlanMacStatusThis object is used to create or delete the entry
of this table. The value '1' is set to create the
entry, and the value '2' is set to deletethe
entry.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.8.1.4 |
mpVlanBigpipeVidControlTableThis is the table type object of the filter
condition concerning to VID for BigPipe. SEQUENCE OF MpVlanBigpipeVidControlEntry .1.3.6.1.4.1.119.2.3.3.13.4.9 |
mpVlanBigpipeVidControlEntryThis is the table entry of
mpVlanBigpipeVidControlTable. MpVlanBigpipeVidControlEntry .1.3.6.1.4.1.119.2.3.3.13.4.9.1 |
mpVlanBigpipeVidControlIndexThis is the index to identify the BigPipe to
which this filter condition is applied.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.9.1.1 |
mpVlanBigpipeVidControlVidThis object is the VID of VLAN or VLAN Group, to
which this filter condition is applied.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.9.1.2 |
mpVlanBigpipeVidControlStatusThis object is used to register/delete the VID
filter condition for BigPipe. The value '1' is
set to register the filter condition, and the
value '2' is set to delete the filter condition.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.9.1.3 |
mpVlanTpFdbTableA table that contains information about
forwarding database per VLAN. SEQUENCE OF MpVlanTpFdbEntry .1.3.6.1.4.1.119.2.3.3.13.4.10 |
mpVlanTpFdbEntryEach entry contains information about
forwarding database per VLAN. MpVlanTpFdbEntry .1.3.6.1.4.1.119.2.3.3.13.4.10.1 |
mpVlanTpFdbVlanIndexIndicates the VLAN number to specify the
forwarding database per VLAN.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.10.1.1 |
mpVlanTpFdbMacAddressIndicates the destination MAC Address which
belongs to the forwarding information of this
VLAN.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.4.10.1.2 |
mpVlanTpFdbIntfNumberEither the value '0', or the port number of
the port from which the frame, which has a
source address equal to the value of the
'mpVlanTPFdbMacAddress', was received.
A value of '0' indicates that the port number
has not been learned but that the bridge
does have some forwarding information about
this address.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.10.1.3 |
mpVlanTpFdbStatusThe state of this entry. If it is '1', this
entry is none of the following. If it is '2',
this entry is not longer valie, but has not
yet been flushed from the table. If it is '3',
this entry was learned, and is being used. If
it is '4', this entry is the bridge's MAC
addresses. If it is '5', this entry is the
MAC address which was registered as filtering
condition.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.10.1.4 |
mpVlanTagProtocolIdIndicates VLAN Tag Protocol ID used in this
system. Range of VLAN Tag Protocol ID is
from 1501(0x05dd) to 65535(0xffff) except
2048(0x0800), 2054(0x0806).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.11 |
mpVlanTagPpTableIt is used for VLAN Tag PP(Point-to-Point)
configuration. SEQUENCE OF MpVlanTagPpEntry .1.3.6.1.4.1.119.2.3.3.13.4.12 |
mpVlanTagPpEntryIndicates the table entry of the VLAN Tag PP
configuration. MpVlanTagPpEntry .1.3.6.1.4.1.119.2.3.3.13.4.12.1 |
mpVlanTagPpIndexIndicates the specified number to identify the
VLAN Tag PP.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.12.1.1 |
mpVlanTagPpRtrIndexIndicates the interface number assigned to the VLAN
Tag PP uniquely, within the equipment. The VLAN Tag
PP identified by this object is the same VLAN Tag PP
identified by the same number of ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.12.1.2 |
mpVlanTagPpIntfNumberThis is the index to identify the Ethernet port
number or PPP port number subscribed to this VLAN
Tag PP. The value of this index is the same as
ifIndex.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.4.12.1.3 |
mpVlanTagPpNameIndicates the name which is assigned to the VLAN
Tag PP for administrative purpose. It is used to
assign or change the name of VLAN Tag PP.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.4.12.1.4 |
mpVlanTagPpMacTypeIndicates the MAC address type. If the value is
set to '1', global MAC address of the physical port
is used. If the value is set to '2', private MAC
address given by user (first 4 octets) is used.
In case of 2, the last two octets is given by the
value of the mpVlanTagPpIndex.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.12.1.5 |
mpVlanTagPpNameStatusThis object is used to register or delete the
VLAN Tag PP.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.4.12.1.6 |
mpBridge OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.5 |
mpBrgDestMacFilterTableThis is the table type object of the filter
condition concerning to the destination MAC
address. SEQUENCE OF MpBrgDestMacFilterEntry .1.3.6.1.4.1.119.2.3.3.13.5.1 |
mpBrgDestMacFilterEntryThis is the table entry of
mpBrgDestMacFilterTable. MpBrgDestMacFilterEntry .1.3.6.1.4.1.119.2.3.3.13.5.1.1 |
mpBrgDestMacFilterVlanIndexThis is the index to identify the VLAN to which
this filter condition is applied.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.5.1.1.1 |
mpBrgDestMacFilterAddressThis object is the destination MAC address which
is filtered in this VLAN.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.5.1.1.2 |
mpBrgDestMacFilterStatusThis object is used to create or delete the table
entry. The value '1' is set to create the entry,
and the value '2' is set to delete the entry.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.5.1.1.3 |
mpBrgSrcMacFilterTableThis is the table type object of the filter
condition concerning to the source MAC address. SEQUENCE OF MpBrgSrcMacFilterEntry .1.3.6.1.4.1.119.2.3.3.13.5.2 |
mpBrgSrcMacFilterEntryThis is the table entry of
mpBrgSrcMacFilterTable. MpBrgSrcMacFilterEntry .1.3.6.1.4.1.119.2.3.3.13.5.2.1 |
mpBrgSrcMacFilterVlanIndexThis is the index to identify the VLAN to which
this filter condition is applied.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.5.2.1.1 |
mpBrgSrcMacFilterAddressThis object is the source MAC address which is
filtered in this VLAN.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.5.2.1.2 |
mpBrgSrcMacFilterStatusThis object is used to create or delete the table
entry. The value '1' is set to create the entry,
and the value '2' is set to delete the entry.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.5.2.1.3 |
mpBrgDestPortFilterTableThis is the table type ofject of the filter
condition concerning to the destination port. SEQUENCE OF MpBrgDestPortFilterEntry .1.3.6.1.4.1.119.2.3.3.13.5.3 |
mpBrgDestPortFilterEntryThis is the table entry of
mpBrgDestPortFilterTable. MpBrgDestPortFilterEntry .1.3.6.1.4.1.119.2.3.3.13.5.3.1 |
mpBrgDestPortFilterIfIndexThis is the index to identify the destination
port to which the filtering function is applied.
The value of this index is the same as IfIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.5.3.1.1 |
mpBrgDestPortFilterStatusThis object is used to create or delete the table
entry. The value '1' is set to create the entry,
and the value '2' is set to delete the entry.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.5.3.1.2 |
mpBrgSrcPortFilterTableThis is the table type ofject of the filter
condition concerning to the source port. SEQUENCE OF MpBrgSrcPortFilterEntry .1.3.6.1.4.1.119.2.3.3.13.5.4 |
mpBrgSrcPortFilterEntryThis is the table entry of
mpBrgSrcPortFilterTable. MpBrgSrcPortFilterEntry .1.3.6.1.4.1.119.2.3.3.13.5.4.1 |
mpBrgSrcPortFilterIfIndexThis is the index to identify the source port to
which the filtering function is applied. The value
of this index is the same as IfIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.5.4.1.1 |
mpBrgSrcPortFilterStatusThis object is used to create or delete the table
entry. The value '1' is set to create the entry,
and the value '2' is set to delete the entry.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.5.4.1.2 |
mpDbAccess OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.6 |
mpDbAccessSaveSignal the system applications to save their config.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.6.1 |
mpDbAccessAllSaveSignal the system applications to save their all config.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.6.2 |
mpEventLog OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.7 |
mpEventLogAttributeSpecifies the type of logging for the events.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.7.1 |
mpEventLogSizeSpecifies the log size.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.2 |
mpEventLoggingFilterSpecifies filtering to be applied to incoming
events. Bit mapped.rw INTEGER -- 0x01 (bit 0) for CRITICAL -- 0x02 (bit 1) for MAJOR -- 0x04 (bit 2) for MINOR -- 0x08 (bit 3) for WARNING -- 0x10 (bit 4) for INFORMATIONAL .1.3.6.1.4.1.119.2.3.3.13.7.3 |
mpEventLogEarliestEventSpecifies the index of the earliest event in
the log.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.4 |
mpEventLogLatestEventSpecifies the index of the latest event in the log.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.5 |
mpEventLogNumEntriesSpecifies the number of entries in the log.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.6 |
mpEventLogCriticalEventsNumber of critical events in the log.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.7 |
mpEventLogMajorEventsNumber of major events in the log.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.8 |
mpEventLogMinorEventsNumber of minor events in the log.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.9 |
mpEventLogWarningEventsNumber of warning events in the log.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.10 |
mpEventLogInformationalEventsNumber of informational events in the log.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.11 |
mpEventLogClearAllClear the log if set to clear.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.7.12 |
mpEventLogClearSeverityDeletes entries in the log with specified severity.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.7.13 |
mpEventLogClearPeriodDeletes entries in the log within the
specified period.
format : yyyy/[m]m/[d]d yyyy/m[m]/[d]d
yyyy year
mm month
dd dayrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.7.14 |
mpEventTableEvent related details. SEQUENCE OF MpEventEntry .1.3.6.1.4.1.119.2.3.3.13.7.15 |
mpEventEntryDetails for particular event. MpEventEntry .1.3.6.1.4.1.119.2.3.3.13.7.15.1 |
mpEventIndexIndex to the event in the table.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.15.1.1 |
mpEventSourceIndicates any code that may be associated with the
source of the event. If no source is associated
defaults to 0.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.15.1.2 |
mpEventCodeIndicates any code that may be associated with the
event for further details. If no code is associated
defaults to 0.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.15.1.3 |
mpEventTimeStampTimestamp of the event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.7.15.1.4 |
mpEventSeverityIndicates event severity.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.7.15.1.5 |
mpEventDescriptionBrief description of the recorded event.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.7.15.1.6 |
mpTrapFilterTableIndicates the table of Trap Filter Information. SEQUENCE OF MpTrapFilterEntry .1.3.6.1.4.1.119.2.3.3.13.7.16 |
mpTrapFilterEntryIndicates the entry of Trap Filter Information. MpTrapFilterEntry .1.3.6.1.4.1.119.2.3.3.13.7.16.1 |
mpTrapFilterGenericThis object is the generic-trap to identify
the trap to which this filter condition is
applied.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.16.1.1 |
mpTrapFilterSpecificThis object is the specific-trap to identify
the trap to which this filter condition is
applied.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.16.1.2 |
mpTrapFilterEnterpriseThis object is the enterprise-trap to identify
the trap to which this filter condition is
applied.ro OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.7.16.1.3 |
mpTrapFilterStatusThis object specifies validity of trap filter.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.7.16.1.4 |
mpTrapFilterNameThis object is the name of the trap to be
displayed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.7.16.1.5 |
mpEventTrapSeverityTableControl Severity of Trap SEQUENCE OF MpEventTrapSeverityEntry .1.3.6.1.4.1.119.2.3.3.13.7.17 |
mpEventTrapSeverityEntryseverity of SpecificTrap MpEventTrapSeverityEntry .1.3.6.1.4.1.119.2.3.3.13.7.17.1 |
mpEventTrapSeverityIndexIndex of Trap Severity Tablero INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.17.1.1 |
mpEventTrapCodeEventCodero INTEGER .1.3.6.1.4.1.119.2.3.3.13.7.17.1.2 |
mpEventTrapSeveritySeverity of Traprw Enumeration .1.3.6.1.4.1.119.2.3.3.13.7.17.1.3 |
mpEventTrapDescriptionInformation of Trapro DisplayString .1.3.6.1.4.1.119.2.3.3.13.7.17.1.4 |
mpEventLogAlmRenewalTimeStampSysUpTime of Alm State Changero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.119.2.3.3.13.7.18 |
mpUiSession OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.8 |
mpUiSessionTableTable that describes active connections. SEQUENCE OF MpUiSessionEntry .1.3.6.1.4.1.119.2.3.3.13.8.1 |
mpUiSessionEntryDescribes each node in the session table. MpUiSessionEntry .1.3.6.1.4.1.119.2.3.3.13.8.1.1 |
mpUiSessionPortThe telnet port/async port that the session is
using.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.8.1.1.1 |
mpUiSessionTimeThe starting time of the sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.8.1.1.2 |
mpUiSessionUserStatusStatus of the session user.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.8.1.1.3 |
mpUiSessionStatusSession validityrw Enumeration .1.3.6.1.4.1.119.2.3.3.13.8.1.1.4 |
mpFtp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.9 |
mpFtpServerStatusThis object controls the operating status of FTP
server. The value '1' is set to enable the FTP
server functionality, and the value '2' is set to
disable the FTP server functionality.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.9.1 |
mpDhcp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.10 |
mpDhcpRelayRequestsThis object is the counter of the total number of
received Dhcp Relay request.ro Counter .1.3.6.1.4.1.119.2.3.3.13.10.1 |
mpDhcpRelayReplysThis is the counter of the total number of
received Dhcp Relay reply.ro Counter .1.3.6.1.4.1.119.2.3.3.13.10.2 |
mpDhcpRelayRequestDiscardsThis is the counter of the total number of
discarded Dhcp Relay request.ro Counter .1.3.6.1.4.1.119.2.3.3.13.10.3 |
mpDhcpRelayReplyDiscardsThis is the counter of the total number of
discareded Dhcp Relay reply.ro Counter .1.3.6.1.4.1.119.2.3.3.13.10.4 |
mpDhcpRelayEnableThe current operational state of the Dhcp Relay
Agent. This object is changed to '1' automatically,
when mpDhcpRelayIfTable is created initially.
Vice versa, this object is changed to '2'
automatically, when mpDhcpRelayIfTable is deleted
lastly. The default value of this object is '2'.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.10.5 |
mpDhcpRelayMaxHopsThis object specifies the maximum number of the
hop count of Dhcp Relay Agent. The value of this
object must be within the range of 1 - 16.
The default value of this object is 4.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.10.6 |
mpDhcpRelayIfTableThis is the table type object of the Dhcp Relay
Agent interface data. SEQUENCE OF MpDhcpRelayIfEntry .1.3.6.1.4.1.119.2.3.3.13.10.8 |
mpDhcpRelayIfEntryThis object is the table entry of
mpDhcpRelayIfTable. MpDhcpRelayIfEntry .1.3.6.1.4.1.119.2.3.3.13.10.8.1 |
mpDhcpRelayIfEntIfIndexThis is the index to identify the router
interface. The value of this index is the same as
ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.10.8.1.1 |
mpDhcpRelayIfEntTransModeThe type of Transfer Mode. The default value
of this object is '1'.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.10.8.1.2 |
mpDhcpRelayIfEntRequestsThis object is the counter of the total number of
received BOOTP-REQUEST from this interface.ro Counter .1.3.6.1.4.1.119.2.3.3.13.10.8.1.3 |
mpDhcpRelayIfEntRepliesThis is the counter of the total number of
attempt to transmit BOOTP-REPLY to this interface.ro Counter .1.3.6.1.4.1.119.2.3.3.13.10.8.1.4 |
mpDhcpRelayIfEntRequestTransmitsThis object is the counter of the total number of
transmitted BOOTP-REQUEST.ro Counter .1.3.6.1.4.1.119.2.3.3.13.10.8.1.5 |
mpDhcpRelayIfEntRequestDiscardsThis is the counter of the total number of
discarded BOOTP-REQUEST.ro Counter .1.3.6.1.4.1.119.2.3.3.13.10.8.1.6 |
mpDhcpRelayIfEntReplyDiscardsThis is the counter of the total number of
discareded BOOTP-REPLY.ro Counter .1.3.6.1.4.1.119.2.3.3.13.10.8.1.7 |
mpDhcpRelayIfEntStatusThis object is used to create or delete the table
entry. The value '1' is set to create the entry,
and the value '2' is set to delete the entry.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.10.8.1.8 |
mpDhcpRelayAddrTableThis is the table type object of the Dhcp Relay
Agent Destination IP Address data. SEQUENCE OF MpDhcpRelayAddrEntry .1.3.6.1.4.1.119.2.3.3.13.10.9 |
mpDhcpRelayAddrEntryThis object is the table entry of
mpDhcpRelayAddrTable. MpDhcpRelayAddrEntry .1.3.6.1.4.1.119.2.3.3.13.10.9.1 |
mpDhcpRelayAddrEntIfIndexThis is the index to identify the router
interface. The value of this index is the same as
ifIndex.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.10.9.1.1 |
mpDhcpRelayAddrEntAddrThis object specifies the relaying destination IP
address.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.10.9.1.2 |
mpDhcpRelayAddrEntStatusThis object is used to create or delete the table
entry. The value '1' is set to create the entry,
and the value '2' is set to delete the entry.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.10.9.1.3 |
mpIp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.11 |
mpIpFilterExcludeTableThis is the table type object of IP address
excluding filter condition. Table of Exclude
IP Filter. SEQUENCE OF MpIpFilterExcludeEntry .1.3.6.1.4.1.119.2.3.3.13.11.3 |
mpIpFilterExcludeEntryThis is the table entry of
mpIpFilterExcludeTable. Exclude IP Filter fields. MpIpFilterExcludeEntry .1.3.6.1.4.1.119.2.3.3.13.11.3.1 |
mpIpFilterExEntIndexThis is the index to identify the IP address
excluding filter entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.3.1.1 |
mpIpFilterExEntInIfIndexThis object specifies the input interface number
to which the excluding filter is applied. The
value of this object is the same as IfIndex of
VLAN/LIS interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.3.1.2 |
mpIpFilterExEntOutIfIndexThis object specifies the output interface number
to which the excluding filter is applied. The
value of this object is the same as IfIndex of
VLAN/LIS interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.3.1.3 |
mpIpFilterExEntSrcIpAddrThis object specifies the source IP address to
which the excluding filter is applied.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.3.1.4 |
mpIpFilterExEntSrcAddrMaskThis object specifies the source IP address mask.
'1' bit is set corresponding to the IP address
part which is to be ignored.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.3.1.5 |
mpIpFilterExEntDestIpAddrThis object specifies the destination IP address
to which the excluding filter is applied.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.3.1.6 |
mpIpFilterExEntDestAddrMaskThis object specifies the destination IP address
mask. '1' bit is set corresponding to the IP
address part which is to be ignored.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.3.1.7 |
mpIpFilterExEntIpOptionsThis object specifies the IP option to which the
excluding filter is applied. In case all the
option is specified, the value '255' is set to
this object. In case no option is specified, the
value '0' is set to this object.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.3.1.8 |
mpIpFilterExEntIpProcNumberThis obeject specifies the protocol to which the
excluding filter is applied. In case of ICMP, the
value '1' is set to this object. In case of TCP,
the value '6' is set to this object. In case of
UDP, the value '17' is set to this object.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.3.1.9 |
mpIpFilterExEntSrcPortThis object specifies the receiving TCP/UDP port
number to which the excluding filter is applied.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.3.1.10 |
mpIpFilterExEntDestPortThis object specifies the sending TCP/UDP port
number to which the excluding filter is applied.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.3.1.11 |
mpIpFilterExEntTcpAckOffSegmentThis object specifies the pakcket handling method
corresponding to the ACK bit of TCP header. In
case of discarding packet when ACK is off, the
value '1' is set to this object. In case of not
discarding packet when ACK is off, the value '2'
is set to this object.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.3.1.12 |
mpIpFilterExEntIcmpSendThis object specifies the ICMP(error) sending
method when a packet is discarded by IP filtering
function. In case of sending ICMP error packet,
the value '1' is set to this object. In case of
not sending ICMP error packet, the value '2' is
set to this object.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.3.1.13 |
mpIpFilterExEntEventLoggingThis object specifies the event handling method
when a packet is discarded by IP filtering
function. In case of reporting it by event, the
value '1' is set to this object. In case of not
reporting it by event, the value '2' is set to
this object.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.3.1.14 |
mpIpFilterExEntStatusThis object is used to create, delete, or modify
this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.11.3.1.15 |
mpIpFilterIncludeTableThis is the table type object of IP pass-filter
condition data. SEQUENCE OF MpIpFilterIncludeEntry .1.3.6.1.4.1.119.2.3.3.13.11.4 |
mpIpFilterIncludeEntryThis is the table entry of
mpIpFilterIncludeTable. MpIpFilterIncludeEntry .1.3.6.1.4.1.119.2.3.3.13.11.4.1 |
mpIpFilterInEntIndexThis is the index to identify the IP pass-filter
condition table entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.4.1.1 |
mpIpFilterInEntInIfIndexThis object specifies the input interface to
which the IP pass-filter is applied. The value
of this index is the same as IfIndex of VLAN/LIS
interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.4.1.2 |
mpIpFilterInEntOutIfIndexThis object specifies the output interface to
which the IP pass-filter is applied. The value of
this index is the same as IfIndex of VLAN/LIS
interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.4.1.3 |
mpIpFilterInEntSrcIpAddrThis object specifies the source IP address to
which the IP pass-filter is applied.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.4.1.4 |
mpIpFilterInEntSrcAddrMaskThis object specified the source IP address mask.
'1' bit is set corresponding to the IP address
part which is to be ignored.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.4.1.5 |
mpIpFilterInEntDestIpAddrThis object specifies the destination IP address
to which the IP pass-filter is applied.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.4.1.6 |
mpIpFilterInEntDestAddrMaskThis object specified the destination IP address
mask. '1' bit is set corresponding to the IP
address part which is to be ignored.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.4.1.7 |
mpIpFilterInEntIpOptionsThis object specifies the IP option to which the
IP pass-filter is applied. In case all the option
is specified, the value '255' is set to this
object. In case no option is specified, the value
'0' is set to this object.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.4.1.8 |
mpIpFilterInEntIpProcNumberThis obeject specifies the protocol to which the
IP pass-filter is applied.
In case of ICMP, the value '1' is set to this
object. In case of TCP, the value '6' is set to
this object. In case of UDP, the value '17' is set
to this object.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.4.1.9 |
mpIpFilterInEntSrcPortThis object specifies the receiving TCP/UDP port
number to which the IP pass-filter is applied.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.4.1.10 |
mpIpFilterInEntDestPortThis object specifies the sending TCP/UDP port
number to which the IP pass-filter is applied.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.4.1.11 |
mpIpFilterInEntTcpAckOffSegmentThis object specifies the pakcket handling method
corresponding to the ACK bit of TCP header. In
case of discarding packet when ACK is off, the
value '1' is set to this object. In case of not
discarding packet when ACK is off, the value '2'
is set to this object.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.4.1.12 |
mpIpFilterInEntLifeTimeThis object specifies the valid time period of
this IP pass-filter condition. When the valid time
period expired, this entry is deleted
automatically. In case of setting the value '0' to
this object, this IP pass-filter condition lasts
until it is deleted by operator command.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.4.1.13 |
mpIpFilterInEntStatusThis object is used to create, delete, or modify
this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.11.4.1.14 |
mpIpInFilterDiscardsThis object is the counter of total number of the
receiving packets discarded by this IP filter.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.5 |
mpIpOutFilterDiscardsThis object is the counter of total number of the
receiving packets discarded by this IP filter.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.6 |
mpIpStaticRouteTableThe table of static route. SEQUENCE OF MpIpStaticRouteEntry .1.3.6.1.4.1.119.2.3.3.13.11.7 |
mpIpStaticRouteEntryA entry of static route. MpIpStaticRouteEntry .1.3.6.1.4.1.119.2.3.3.13.11.7.1 |
mpIpStaticRouteDestThis object specifies destination IP Address of
static route.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.7.1.1 |
mpIpStaticRouteMaskThis object specifies network mask of static route.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.7.1.2 |
mpIpStaticRouteNextHopThis object specifies next-hop IP Address of
static route. The value 0 is specified when route
type is 'other','reject' or' local'.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.7.1.3 |
mpIpStaticRouteIfIndexThis object specifies the outgoing ifIndex.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.7.1.4 |
mpIpStaticRouteTypeThis object specifies the route type. The route
type other(1) is not reflected to IP routing table.
The route type reject(2) is used to discard
corresponding IP packet.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.7.1.5 |
mpIpStaticRoutePriorityThis object specifies route priority. The
entry which route priority is the smallest in
usable next-hop is reflected to IP routing table
when route priority is different in every next-hop
at the case of multi-path.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.7.1.6 |
mpIpStaticRouteTagThis object specifies route tag. In case route type
is 'reject', setting to this object is prohibited.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.7.1.7 |
mpIpStaticRouteStatusThis object specifies status of this entry.
When entry is deleted, invalid(2) is set.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.7.1.8 |
mpIpRoutePriorityTableThe route priority table of the routing protocol
unit. The value of this table is the default value
of each routing protocol of this system. It is used
for tie-break when the requirement of the addition
of routing table for the same network from plural
routing protocols occur and route priority is the
same. SEQUENCE OF MpIpRoutePriorityEntry .1.3.6.1.4.1.119.2.3.3.13.11.8 |
mpIpRoutePriorityEntryA route priority entry of the routing protocol. MpIpRoutePriorityEntry .1.3.6.1.4.1.119.2.3.3.13.11.8.1 |
mpIpRoutePriorityProtocolThis object specifies the protocol of IP routing
table.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.8.1.1 |
mpIpRoutePriorityValueThis object specifies route priority value.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.8.1.2 |
mpIpImportListTableThe table which is used to distribute route
information to different routing protocol.
It defines condition of routing table to be
distributed and value to be used at
distributing. SEQUENCE OF MpIpImportListEntry .1.3.6.1.4.1.119.2.3.3.13.11.9 |
mpIpImportListEntryThe entry which is used to distribute route
information to different routing protocol. MpIpImportListEntry .1.3.6.1.4.1.119.2.3.3.13.11.9.1 |
mpIpImportListNumberThis object specifies import-list number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.9.1.1 |
mpIpImportListActionThis object specifies whether routing table
corresponding to the condition is distributed
or ignored.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.9.1.2 |
mpIpImportListConIfIndexThis object specifies a condition by the outgoing
interface. The value 0 means it is outside of the
condition decision.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.9.1.3 |
mpIpImportListConNetAddrThis object specifies the network address. It is
shared with the network condition and the range
condition.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.9.1.4 |
mpIpImportListConNetMaskThis object specifies the network mask. It is shared
with the network condition and the range condition.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.9.1.5 |
mpIpImportListConNetStatusThis object specifies the status of condition about
network address.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.9.1.6 |
mpIpImportListConRangeStatusThis object specifies the status of condition about
network address range.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.9.1.7 |
mpIpImportListConNextHopThis object specifies the condition about next-hop.
The value 0 means it is outside of the condition
decision.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.9.1.8 |
mpIpImportListConSourceThis object specifies IP address or router ID of
advertising router.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.9.1.9 |
mpIpImportListConSourceStatusThis object specifies the status of condition
about advertising router.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.9.1.10 |
mpIpImportListConMetricThis object specifies the condition about metric.
The value 0 means it is outside of the condition
decision.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.9.1.11 |
mpIpImportListConRouteTypeThis object specifies the condition about route
type. The value 0 means it is outside of the
condition decision.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.9.1.12 |
mpIpImportListConTagThis object specifies route tag.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.9.1.13 |
mpIpImportListConTagStatusThis object specifies the status of condition
about route tag.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.9.1.14 |
mpIpImportListConPIdThis object specifies the condition about protocol
ID. The value 0 means it is outside of the condition
decision.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.9.1.15 |
mpIpImportListSetNetAddrThis object specifies the network address which is
applied when routing table corresponding to the
condition is distributed.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.9.1.16 |
mpIpImportListSetNetMaskThis object specifies the mask address which is
applied when routing table corresponding to the
condition is distributed.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.9.1.17 |
mpIpImportListSetNetStatusThis object specifies the status of network
address which is applied when routing table
corresponding to the condition is distributed.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.9.1.18 |
mpIpImportListSetMetricThis object specifies the metric value which is
applied when routing table corresponding to the
condition is distributed.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.9.1.19 |
mpIpImportListSetNextHopThis object specifies the next-hop IP address
which is applied when routing table corresponding
to the condition is distributed.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.9.1.20 |
mpIpImportListSetTagThis object specifies the route tag which is applied
when routing table corresponding to the condition is
distributed.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.9.1.21 |
mpIpImportListSetRouteTypeThis object specifies the external route type which
is applied when routing table corresponding to the
condition is distributed to OSPF.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.9.1.22 |
mpIpImportListTableStatusThis object specifies status of this entry.
When entry is deleted, invalid(2) is set.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.9.1.23 |
mpIpVpnTableThe table of addressing information relevant to
this entity's ifIndex. SEQUENCE OF MpIpVpnEntry .1.3.6.1.4.1.119.2.3.3.13.11.10 |
mpIpVpnEntryThe addressing information for one of this
entity's ifIndex. MpIpVpnEntry .1.3.6.1.4.1.119.2.3.3.13.11.10.1 |
mpIpVpnIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable. The
interface referred by a particular value of this
index is the same interface as identified by the
same value of ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.10.1.1 |
mpIpVpnIdThis is the index to identify VPN the entry.
The value of this index must be assigned uniquely,
witrhin the range of 1 - 65535.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.10.1.2 |
mpIpVpnIpGroupTableThe table of IP group information relevant to
this entity's VPNID. SEQUENCE OF MpIpVpnIpGroupEntry .1.3.6.1.4.1.119.2.3.3.13.11.11 |
mpIpVpnIpGroupEntryThe IP group information for one of this
entity's VPNID. MpIpVpnIpGroupEntry .1.3.6.1.4.1.119.2.3.3.13.11.11.1 |
mpIpVpnIpGroupVpnIdThis is the index to identify the VPN entry.
The value of this index must be assigned uniquely,
witrhin the range of 1 - 65535.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.11.1.1 |
mpIpVpnIpForwardingThe indication of whether this entity is acting
as an IP gateway in respect to the forwarding of
datagrams received by, but not addressed to, this
entity. IP gateways forward datagrams. IP hosts
do not (except those source-routed via the host).
Note that for some managed nodes, this object may
take on only a subset of the values possible.
Accordingly, it is appropriate for an agent to
return a `badValue' response if a management
station attempts to change this object to an
inappropriate value.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.11.1.2 |
mpIpVpnIpDefaultTTLThe default value inserted into the Time-To-Live
field of the IP header of datagrams originated at
this entity, whenever a TTL value is not supplied
by the transport layer protocol.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.11.1.3 |
mpIpVpnIpInReceivesThe total number of input datagrams received from
interfaces, including those received in error.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.4 |
mpIpVpnIpInHdrErrorsThe number of input datagrams discarded due to
errors in their IP headers, including bad
checksums, version number mismatch, other format
errors, time-to-live exceeded, errors discovered
in processing their IP options, etc.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.5 |
mpIpVpnIpInAddrErrorsThe number of input datagrams discarded because
the IP address in their IP header's destination
field was not a valid address to be received at
this entity. This count includes invalid
addresses (e.g., 0.0.0.0) and addresses of
unsupported Classes (e.g., Class E). For entities
which are not IP Gateways and therefore do not
forward datagrams, this counter includes datagrams
discarded because the destination address was not
a local address.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.6 |
mpIpVpnIpForwDatagramsThe number of input datagrams for which this
entity was not their final IP destination, as a
result of which an attempt was made to find a
route to forward them to that final destination.
In entities which do not act as IP Gateways, this
counter will include only those packets which were
Source-Routed via this entity, and the Source-
Route option processing was successful.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.7 |
mpIpVpnIpInUnknownProtosThe number of locally-addressed datagrams
received successfully but discarded because of an
unknown or unsupported protocol.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.8 |
mpIpVpnIpInDiscardsThe number of input IP datagrams for which no
problems were encountered to prevent their
continued processing, but which were discarded
(e.g., for lack of buffer space). Note that this
counter does not include any datagrams discarded
while awaiting re-assembly.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.9 |
mpIpVpnIpInDeliversThe total number of input datagrams successfully
delivered to IP user-protocols (including ICMP).ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.10 |
mpIpVpnIpOutRequestsThe total number of IP datagrams which local IP
user-protocols (including ICMP) supplied to IP in
requests for transmission. Note that this counter
does not include any datagrams counted in
ipForwDatagrams.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.11 |
mpIpVpnIpOutDiscardsThe number of output IP datagrams for which no
problem was encountered to prevent their
transmission to their destination, but which were
discarded (e.g., for lack of buffer space). Note
that this counter would include datagrams counted
in ipForwDatagrams if any such packets met this
(discretionary) discard criterion.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.12 |
mpIpVpnIpOutNoRoutesThe number of IP datagrams discarded because no
route could be found to transmit them to their
destination. Note that this counter includes any
packets counted in ipForwDatagrams which meet this
`no-route' criterion. Note that this includes any
datagarms which a host cannot route because all of
its default gateways are down.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.13 |
mpIpVpnIpReasmTimeoutThe maximum number of seconds which received
fragments are held while they are awaiting
reassembly at this entity.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.11.1.14 |
mpIpVpnIpReasmReqdsThe number of IP fragments received which needed
to be reassembled at this entity.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.15 |
mpIpVpnIpReasmOKsThe number of IP datagrams successfully re-
assembled.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.16 |
mpIpVpnIpReasmFailsThe number of failures detected by the IP re-
assembly algorithm (for whatever reason: timed
out, errors, etc). Note that this is not
necessarily a count of discarded IP fragments
since some algorithms (notably the algorithm in
RFC 815) can lose track of the number of fragments
by combining them as they are received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.17 |
mpIpVpnIpFragOKsThe number of IP datagrams that have been
successfully fragmented at this entity.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.18 |
mpIpVpnIpFragFailsThe number of IP datagrams that have been
discarded because they needed to be fragmented at
this entity but could not be, e.g., because their
Don't Fragment flag was set.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.19 |
mpIpVpnIpFragCreatesThe number of IP datagram fragments that have
been generated as a result of fragmentation at
this entity.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.20 |
mpIpVpnIpRoutingDiscardsThe number of routing entries which were chosen
to be discarded even though they are valid. One
possible reason for discarding such an entry could
be to free-up buffer space for other routing.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.21 |
mpIpVpnIpInFilterDiscardsThis object is the counter of total number of the
receiving packets discarded by this IP filter.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.22 |
mpIpVpnIpOutFilterDiscardsThis object is the counter of total number of the
receiving packets discarded by this IP filter.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.11.1.23 |
mpIpVpnIpGroupStatusWhen an entry is created it autmatically becomes
valid(1). When this object is set to invalid(2)
then this entry will be deleted.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.11.1.24 |
mpIpVpnIpAddrTableThe table of addressing information relevant to
this entity's VPNID & IP addresses. SEQUENCE OF MpIpVpnIpAddrEntry .1.3.6.1.4.1.119.2.3.3.13.11.12 |
mpIpVpnIpAddrEntryThe addressing information for one of this
entity's VPNID & IP addresses. MpIpVpnIpAddrEntry .1.3.6.1.4.1.119.2.3.3.13.11.12.1 |
mpIpVpnIpAdEntVpnIdThis is the index to identify the VPN entry.
The value of this index must be assigned uniquely,
witrhin the range of 1 - 65535.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.12.1.1 |
mpIpVpnIpAdEntIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable. The
interface referred by a particular value of this
index is the same interface as identified by the
same value of ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.12.1.2 |
mpIpVpnIpAdEntAddrThe IP address to which this entry's addressing
information pertains. This IP address must always
be a unicast IP address and it should never be a
Class D or E IP address.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.12.1.3 |
mpIpVpnIpAdEntNetMaskThe subnet mask associated with the IP address of
this entry. The value of this object is an IP
address with the network part bits set to all 1's
and all the hosts part bits set to all 0's.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.12.1.4 |
mpIpVpnIpAdEntBcastAddrThe value of this object is the broadcast IP
address for this entry. The broadcast IP address
is the the IP address with the host part bits
set to all 1's or all 0's.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.12.1.5 |
mpIpVpnIpAdEntReasmMaxSizeThe size of the largest IP datagram which this
entity can re-assemble from incoming IP fragmented
datagrams received on this interface.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.12.1.6 |
mpIpVpnIpAdEntStatusWhen an entry is created it autmatically becomes
valid(1). When this object is set to invalid(2)
then this entry will be deleted.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.7 |
mpIpVpnIpAdEntEncapTypeThis object refers to the encapsulation type
for the interface of this entry. For VLAN
interfaces the encapsulation type can only be
set to dix(2) or snap(3). For LIS interfaces
the encapsulation type can only be set to
none(1).rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.8 |
mpIpVpnIpAdEntForwardingThis object indicates operation for data gram.
to forwarding(1). When this interface is IP host,
this object is set to not-forwarding(2).rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.9 |
mpIpVpnIpAdEntArpTimeOutEffective time of the Dynamic VPN IP ARP table
(mpIpVpnIpNetToMediaTable). The value 0 means
infinity.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.12.1.10 |
mpIpVpnIpAdEntIcmpRedirectStatusThis object indicates whether an ICMP redirect
message is transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.11 |
mpIpVpnIpAdEntIcmpUnreachNetInStatusThis object indicates whether an ICMP destination
unreachable(network unreachable in) message is
transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.12 |
mpIpVpnIpAdEntIcmpUnreachNetOutStatusThis object indicates whether an ICMP destination
unreachable(network unreachable out) message is
transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.13 |
mpIpVpnIpAdEntIcmpUnreachHostInStatusThis object indicates whether an ICMP destination
unreachable(host unreachable in) message is
transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.14 |
mpIpVpnIpAdEntIcmpUnreachHostOutStatusThis object indicates whether an ICMP destination
unreachable(host unreachable out) message is
transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.15 |
mpIpVpnIpAdEntIcmpUnreachProtInStatusThis object indicates whether an ICMP destination
unreachable(protocol unreachable in) message is
transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.16 |
mpIpVpnIpAdEntIcmpUnreachProtOutStatusThis object indicates whether an ICMP destination
unreachable(protocol unreachable out) message is
transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.17 |
mpIpVpnIpAdEntIcmpUnreachPortInStatusThis object indicates whether an ICMP destination
unreachable(port unreachable in) message is
transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.18 |
mpIpVpnIpAdEntIcmpUnreachPortOutStatusThis object indicates whether an ICMP destination
unreachable(port unreachable out) message is
transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.19 |
mpIpVpnIpAdEntIcmpUnreachFragNeededInStatusThis object indicates whether an ICMP destination
unreachable(fragmentation needed and DF set in)
message is transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.20 |
mpIpVpnIpAdEntIcmpUnreachFragNeededOutStatusThis object indicates whether an ICMP destination
unreachable(fragmentation needed and DF set out)
message is transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.21 |
mpIpVpnIpAdEntIcmpUnreachRouteFailInStatusThis object indicates whether an ICMP destination
unreachable(source route failed in)message is
transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.22 |
mpIpVpnIpAdEntIcmpUnreachRouteFailOutStatusThis object indicates whether an ICMP destination
unreachable(source route failed out)message is
transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.23 |
mpIpVpnIpAdEntIcmpTtlExceedInStatusThis object indicates whether an ICMP time
exceeded(time to live exceeded in transit in)
message is transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.24 |
mpIpVpnIpAdEntIcmpTtlExceedOutStatusThis object indicates whether an ICMP time
exceeded(time to live exceeded in transit out)
message is transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.25 |
mpIpVpnIpAdEntIcmpReassemblyExceedInStatusThis object indicates whether an ICMP time
exceeded(fragment reassembly time exceeded in)
message is transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.26 |
mpIpVpnIpAdEntIcmpReassemblyExceedOutStatusThis object indicates whether an ICMP time
exceeded(fragment reassembly time exceeded out)
message is transmitted to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.27 |
mpIpVpnIpAdEntIcmpParamProbInStatusThis object indicates whether an ICMP parameter
problem(in) message is transmitted to this
Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.28 |
mpIpVpnIpAdEntIcmpParamProbOutStatusThis object indicates whether an ICMP parameter
problem(out) message is transmitted to this
Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.29 |
mpIpVpnIpAdEntProxyArpStatusThis object controls the operating status of the
Proxy ARP in this Interface.This object is set
to '1' to enable the Proxy ARP functionality, and
is set to '2' to disable the Proxy ARP
functionality.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.30 |
mpIpVpnIpAdEntDirectedBroadcastStatusThis object controls the operating status of the
Directed Broadcast Forwarding in this Interface.
This object is set to '1' to enable the Directed
Broadcast Forwarding functionality, and is set to
'2' to disable the Directed Broadcast Forwarding
functionality.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.12.1.31 |
mpIpVpnIpAdEntPathThroughListNumberThis object controls the operating status of the
Path Through Forwarding in this Interface.
This object is set to 'except 0' to enable the
Path Through Forwarding functionality, and is set
to '0' to disable the Path Through Forwarding
functionality.But, this number must be in relation
to the direction-list.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.12.1.32 |
mpIpVpnIpAdEntExtendedStaticRouteListNumberThis object controls the operating status of the
Extended Static Routing in this Interface.
This object is set to 'except 0' to enable the
Extended Static Routing functionality, and is set
to '0' to disable the Extended Static Routing
functionality.But, this number must be in relation
to the direction-list.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.12.1.33 |
mpIpVpnIpCidrTableThe table of IP cidr information relevant to
this entity's VPNID. SEQUENCE OF MpIpVpnIpCidrEntry .1.3.6.1.4.1.119.2.3.3.13.11.13 |
mpIpVpnIpCidrEntryThe IP cidr information for one of this
entity's VPNID. MpIpVpnIpCidrEntry .1.3.6.1.4.1.119.2.3.3.13.11.13.1 |
mpIpVpnIpCidrVpnIdThis is the index to identify the VPN entry.
The value of this index must be assigned uniquely,
witrhin the range of 1 - 65535.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.13.1.1 |
mpIpVpnIpCidrRouteNumberThe number of current mpIpVpnIpCidrRouteTable
entries that are not invalid.ro Gauge32 .1.3.6.1.4.1.119.2.3.3.13.11.13.1.2 |
mpIpVpnIpCidrRouteTableThis entity's IP Routing table. SEQUENCE OF MpIpVpnIpCidrRouteEntry .1.3.6.1.4.1.119.2.3.3.13.11.14 |
mpIpVpnIpCidrRouteEntryA particular route to a particular destina-
tion, under a particular policy. MpIpVpnIpCidrRouteEntry .1.3.6.1.4.1.119.2.3.3.13.11.14.1 |
mpIpVpnIpCidrRouteVpnIdThis is the index to identify the VPN entry.
The value of this index must be assigned uniquely,
witrhin the range of 1 - 65535.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.14.1.1 |
mpIpVpnIpCidrRouteDestThe destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
mpIpVpnIpCidrRouteMask object is not equal to x.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.14.1.2 |
mpIpVpnIpCidrRouteMaskIndicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the mpIpVpnIpCidrRouteDest field.
For those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the mpIpVpnIpCidrRouteMask by reference to the
IP Address Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
mpIpVpnIpCidrRouteDest object is not equal
to mpIpVpnIpCidrRouteDest.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.14.1.3 |
mpIpVpnIpCidrRouteTosThe policy specifier is the IP TOS Field. The encoding
of IP TOS is as specified by the following convention.
Zero indicates the default path if no more specific
policy applies.
+-+-+-+-+-+-+-+-+
| | | |
| PRECEDENCE | TYPE OF SERVICE | 0 |
| | | |
+-+-+-+-+-+-+-+-+
IP TOS IP TOS
Field Policy Field Policy
Contents Code Contents Code
0 0 0 0 ==> 0 0 0 0 1 ==> 2
0 0 1 0 ==> 4 0 0 1 1 ==> 6
0 1 0 0 ==> 8 0 1 0 1 ==> 10
0 1 1 0 ==> 12 0 1 1 1 ==> 14
1 0 0 0 ==> 16 1 0 0 1 ==> 18
1 0 1 0 ==> 20 1 0 1 1 ==> 22
1 1 0 0 ==> 24 1 1 0 1 ==> 26
1 1 1 0 ==> 28 1 1 1 1 ==> 30ro Integer32 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.4 |
mpIpVpnIpCidrRouteNextHopOn remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.14.1.5 |
mpIpVpnIpCidrRouteIfIndexThe ifIndex value which identifies the local
interface through which the next hop of this
route should be reached.ro Integer32 -- @015 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.6 |
mpIpVpnIpCidrRouteTypeThe type of route. Note that local(3) refers
to a route for which the next hop is the final
destination; remote(4) refers to a route for
which the next hop is not the final destina-
tion.
Routes which do not result in traffic forwarding or
rejection should not be displayed even if the
implementation keeps them stored internally.
reject (2) refers to a route which, if matched, discards
the message as unreachable. This is used in some
protocols as a means of correctly aggregating routes.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.14.1.7 |
mpIpVpnIpCidrRouteProtoThe routing mechanism via which this route was
learned. Inclusion of values for gateway rout-
ing protocols is not intended to imply that
hosts should support those protocols.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.14.1.8 |
mpIpVpnIpCidrRouteAgeThe number of seconds since this route was
last updated or otherwise determined to be
correct. Note that no semantics of `too old'
can be implied except through knowledge of the
routing protocol by which the route was
learned.ro Integer32 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.9 |
mpIpVpnIpCidrRouteInfoA reference to MIB definitions specific to the
particular routing protocol which is responsi-
ble for this route, as determined by the value
specified in the route's mpIpVpnIpCidrRouteProto
value.
If this information is not present, its value
should be set to the OBJECT IDENTIFIER { 0 0 },
which is a syntactically valid object identif-
ier, and any implementation conforming to ASN.1
and the Basic Encoding Rules must be able to
generate and recognize this value.ro OBJECT IDENTIFIER -- @015 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.10 |
mpIpVpnIpCidrRouteNextHopASThe Autonomous System Number of the Next Hop.
The semantics of this object are determined by
the routing-protocol specified in the route's
mpIpVpnIpCidrRouteProto value. When this
object is unknown or not relevant its value
should be set to zero.ro Integer32 -- @015 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.11 |
mpIpVpnIpCidrRouteMetric1The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
mpIpVpnIpCidrRouteProto value. If this metric
is not used, its value should be set to -1.ro Integer32 -- @015 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.12 |
mpIpVpnIpCidrRouteMetric2An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
mpIpVpnIpCidrRouteProto value. If this metric
is not used, its value should be set to -1.ro Integer32 -- @015 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.13 |
mpIpVpnIpCidrRouteMetric3An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
mpIpVpnIpCidrRouteProto value. If this metric
is not used, its value should be set to -1.ro Integer32 -- @015 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.14 |
mpIpVpnIpCidrRouteMetric4An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
mpIpVpnIpCidrRouteProto value. If this metric
is not used, its value should be set to -1.ro Integer32 -- @015 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.15 |
mpIpVpnIpCidrRouteMetric5An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
mpIpVpnIpCidrRouteProto value. If this metric
is not used, its value should be set to -1.ro Integer32 -- @015 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.16 |
mpIpVpnIpCidrRouteStatusThe row status variable, used according to
row installation and removal conventions.ro RowStatus -- @015 .1.3.6.1.4.1.119.2.3.3.13.11.14.1.17 |
mpIpVpnIpRouteTableThis entity's IP Routing table. SEQUENCE OF MpIpVpnIpRouteEntry .1.3.6.1.4.1.119.2.3.3.13.11.15 |
mpIpVpnIpRouteEntryA route to a particular destination. MpIpVpnIpRouteEntry .1.3.6.1.4.1.119.2.3.3.13.11.15.1 |
mpIpVpnIpRouteVpnIdThis is the index to identify the VPN entry.
The value of this index must be assigned uniquely,
witrhin the range of 1 - 65535.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.15.1.1 |
mpIpVpnIpRouteDestThe destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.15.1.2 |
mpIpVpnIpRouteIfIndexThe index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.15.1.3 |
mpIpVpnIpRouteMetric1The primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
mpIpVpnIpRouteProto value. If this metric is
not used, its value should be set to -1.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.15.1.4 |
mpIpVpnIpRouteMetric2An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
mpIpVpnIpRouteProto value. If this metric is
not used, its value should be set to -1.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.15.1.5 |
mpIpVpnIpRouteMetric3An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
mpIpVpnIpRouteProto value. If this metric is
not used, its value should be set to -1.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.15.1.6 |
mpIpVpnIpRouteMetric4An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.15.1.7 |
mpIpVpnIpRouteNextHopThe IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface.)rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.15.1.8 |
mpIpVpnIpRouteTypeThe type of route. Note that the values
direct(3) and indirect(4) refer to the notion of
direct and indirect routing in the IP
architecture.
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the mpIpVpnIpRouteTable object. That is, it
effectively dissasociates the destination
identified with said entry from the route
identified with said entry. It is an
implementation-specific matter as to whether the
agent removes an invalidated entry from the table.
Accordingly, management stations must be prepared
to receive tabular information from agents that
corresponds to entries not currently in use.
Proper interpretation of such entries requires
examination of the relevant mpIpVpnIpRouteType
object.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.15.1.9 |
mpIpVpnIpRouteProtoThe routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.15.1.10 |
mpIpVpnIpRouteAgeThe number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was learned.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.15.1.11 |
mpIpVpnIpRouteMaskIndicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the mpIpVpnIpRouteDest field. For
those systems that do not support arbitrary subnet
masks, an agent constructs the value of the
mpIpVpnIpRouteMask by determining whether the
value of the correspondent mpIpVpnIpRouteDest
field belong to a class-A, B, or C network,
and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the mpIpVpnIpRouteDest is 0.0.0.0
(a default route), then the mask value is also
0.0.0.0. It should be noted that all IP routing
subsystems implicitly use this mechanism.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.15.1.12 |
mpIpVpnIpRouteMetric5An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
mpIpVpnIpRouteProto value. If this metric is not
used, its value should be set to -1.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.15.1.13 |
mpIpVpnIpRouteInfoA reference to MIB definitions specific to the
particular routing protocol which is responsible
for this route, as determined by the value
specified in the route's mpIpVpnIpRouteProto
value. If this information is not present, its
value should be set to the OBJECT IDENTIFIER
{ 0 0 }, which is a syntatically valid object
identifier, and any conformant implementation of
ASN.1 and BER must be able to generate and
recognize this value.ro OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.11.15.1.14 |
mpIpVpnIpNetToMediaTableThe IP Address Translation table used for mapping
from IP addresses to physical addresses. SEQUENCE OF MpIpVpnIpNetToMediaEntry .1.3.6.1.4.1.119.2.3.3.13.11.16 |
mpIpVpnIpNetToMediaEntryEach entry contains one IpAddress to `physical'
address equivalence. MpIpVpnIpNetToMediaEntry .1.3.6.1.4.1.119.2.3.3.13.11.16.1 |
mpIpVpnIpNetToMediaVpnIdThis is the index to identify the VPN entry.
The value of this index must be assigned uniquely,
witrhin the range of 1 - 65535.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.16.1.1 |
mpIpVpnIpNetToMediaIfIndexThe interface on which this entry's equivalence
is effective. The interface identified by a
particular value of this index is the same
interface as identified by the same value of
ifIndex.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.16.1.2 |
mpIpVpnIpNetToMediaPhysAddressThe media-dependent `physical' address.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.11.16.1.3 |
mpIpVpnIpNetToMediaNetAddressThe IpAddress corresponding to the media-
dependent `physical' address.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.16.1.4 |
mpIpVpnIpNetToMediaTypeThe type of mapping.
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the mpIpVpnIpNetToMediaTable. That is, it
effectively dissasociates the interface identified
with said entry from the mapping identified with
said entry.
It is an implementation-specific matter as to
whether the agent removes an invalidated entry
from the table. Accordingly, management stations
must be prepared to receive tabular information
from agents that corresponds to entries not
currently in use. Proper interpretation of such
entries requires examination of the relevant
mpIpVpnIpNetToMediaType object.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.16.1.5 |
mpIpVpnStaticProxyArpTableThis entity's Static Proxy ARP table. SEQUENCE OF MpIpVpnStaticProxyArpEntry .1.3.6.1.4.1.119.2.3.3.13.11.17 |
mpIpVpnStaticProxyArpEntryThis entity's Static Proxy ARP table. MpIpVpnStaticProxyArpEntry .1.3.6.1.4.1.119.2.3.3.13.11.17.1 |
mpIpVpnStaticProxyArpVpnIdThis is the index to identify the VPN entry.
The value of this index must be assigned uniquely,
witrhin the range of 1 - 65535.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.17.1.1 |
mpIpVpnStaticProxyArpIfIndexThe interface on which this entry's equivalence
is effective. The interface identified by a
particular value of this index is the same
interface as identified by the same value of
ifIndex.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.17.1.2 |
mpIpVpnStaticProxyArpNetAddressThe IpAddress corresponding to the media-
dependent `physical' address.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.17.1.3 |
mpIpVpnStaticProxyArpNetMaskThe IpAddress corresponding to the media-
dependent `physical' address.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.17.1.4 |
mpIpVpnStaticProxyArpStatusWhen an entry is created it autmatically becomes
valid(1). When this object is set to invalid(2)
then this entry will be deleted.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.17.1.5 |
mpIpVpnIcmpTableThe table of ICMP group information relevant to
this entity's VPNID. SEQUENCE OF MpIpVpnIcmpEntry .1.3.6.1.4.1.119.2.3.3.13.11.18 |
mpIpVpnIcmpEntryThe ICMP group information for one of this
entity's VPNID. MpIpVpnIcmpEntry .1.3.6.1.4.1.119.2.3.3.13.11.18.1 |
mpIpVpnIcmpVpnIdThis is the index to identify the VPN entry.
The value of this index must be assigned uniquely,
witrhin the range of 1 - 65535.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.18.1.1 |
mpIpVpnIcmpInMsgsThe total number of ICMP messages which the
entity received. Note that this counter includes
all those counted by mpIpVpnIcmpInErrors.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.2 |
mpIpVpnIcmpInErrorsThe number of ICMP messages which the entity
received but determined as having ICMP-specific
errors (bad ICMP checksums, bad length, etc.).ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.3 |
mpIpVpnIcmpInDestUnreachsThe number of ICMP Destination Unreachable
messages received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.4 |
mpIpVpnIcmpInTimeExcdsThe number of ICMP Time Exceeded messages
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.5 |
mpIpVpnIcmpInParmProbsThe number of ICMP Parameter Problem messages
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.6 |
mpIpVpnIcmpInSrcQuenchsThe number of ICMP Source Quench messages
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.7 |
mpIpVpnIcmpInRedirectsThe number of ICMP Redirect messages received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.8 |
mpIpVpnIcmpInEchosThe number of ICMP Echo (request) messages
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.9 |
mpIpVpnIcmpInEchoRepsThe number of ICMP Echo Reply messages received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.10 |
mpIpVpnIcmpInTimestampsThe number of ICMP Timestamp (request) messages
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.11 |
mpIpVpnIcmpInTimestampRepsThe number of ICMP Timestamp Reply messages
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.12 |
mpIpVpnIcmpInAddrMasksThe number of ICMP Address Mask Request messages
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.13 |
mpIpVpnIcmpInAddrMaskRepsThe number of ICMP Address Mask Reply messages
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.14 |
mpIpVpnIcmpOutMsgsThe total number of ICMP messages which this
entity attempted to send. Note that this counter
includes all those counted by mpIpVpnIcmpOutErrors.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.15 |
mpIpVpnIcmpOutErrorsThe number of ICMP messages which this entity did
not send due to problems discovered within ICMP
such as a lack of buffers. This value should not
include errors discovered outside the ICMP layer
such as the inability of IP to route the resultant
datagram. In some implementations there may be no
types of error which contribute to this counter's
value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.16 |
mpIpVpnIcmpOutDestUnreachsThe number of ICMP Destination Unreachable
messages sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.17 |
mpIpVpnIcmpOutTimeExcdsThe number of ICMP Time Exceeded messages sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.18 |
mpIpVpnIcmpOutParmProbsThe number of ICMP Parameter Problem messages
sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.19 |
mpIpVpnIcmpOutSrcQuenchsThe number of ICMP Source Quench messages sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.20 |
mpIpVpnIcmpOutRedirectsThe number of ICMP Redirect messages sent. For a
host, this object will always be zero, since hosts
do not send redirects.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.21 |
mpIpVpnIcmpOutEchosThe number of ICMP Echo (request) messages sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.22 |
mpIpVpnIcmpOutEchoRepsThe number of ICMP Echo Reply messages sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.23 |
mpIpVpnIcmpOutTimestampsThe number of ICMP Timestamp (request) messages
sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.24 |
mpIpVpnIcmpOutTimestampRepsThe number of ICMP Timestamp Reply messages
sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.25 |
mpIpVpnIcmpOutAddrMasksThe number of ICMP Address Mask Request messages
sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.26 |
mpIpVpnIcmpOutAddrMaskRepsThe number of ICMP Address Mask Reply messages
sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.11.18.1.27 |
mpIpVpnPingTableThe table of ping management information relevant to
this entity's ICMP echo identifier. SEQUENCE OF MpIpVpnPingEntry .1.3.6.1.4.1.119.2.3.3.13.11.19 |
mpIpVpnPingEntryThe ping management information for one of this
entity's ICMP echo identifier. MpIpVpnPingEntry .1.3.6.1.4.1.119.2.3.3.13.11.19.1 |
mpIpVpnPingIdThis is the index to identify the ping entry.
The value of this index must be assigned uniquely,
within the range of 1 - 65535.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.19.1.1 |
mpIpVpnPingVpnIdThe value of this object is the VPNID for this
entry, within the range of 1 - 65535.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.19.1.2 |
mpIpVpnPingTargetThe value of this object is the destination IP
address for this entry. This IP address must
always be a unicast IP address and it should
never be a Class D or E IP address.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.19.1.3 |
mpIpVpnPingRequestSendThe value of this object is the ping request
number of the times.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.19.1.4 |
mpIpVpnPingDataLengthThe value of this object is the ping data
length, within the range of 0 - 65507.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.19.1.5 |
mpIpVpnPingSendTosThe value of this object is the TOS value in
ping packet, within the range of 0 - 0xfe.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.19.1.6 |
mpIpVpnPingSendTtlThe value of this object is the TTL value in
ping packet, within the range of 1 - 255.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.19.1.7 |
mpIpVpnPingSendTimeOutThe value of this object is the ping time out
value, within the range of 1 - 60 seconds.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.19.1.8 |
mpIpVpnPingSendInterfaceThe value of this object is ifIndex. IP address
assigned ifIndex is set as source IP address in
ping packets.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.19.1.9 |
mpIpVpnPingStatusThis object refers to the ping entry status.
When this object is set to create(1), ping
entry is created. Set to inProgress(2), ping
is Started. When a reply or icmp error
receiveed and time out occured, the status
become complete(3). This object can not set to
complete(3). Set to destroy(4), entry is
deleted.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.11.19.1.10 |
mpIpVpnPingResultThis object refers to the ping result status.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.11.19.1.11 |
mpIpVpnPingErrorSourceAddressThis value of this object is the error source
IP address in icmp error reply message.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.11.19.1.12 |
mpRip OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.12 |
mpRip2IfConfTableThis is the table type object of the RIP sending
operation mode. SEQUENCE OF MpRip2IfConfEntry .1.3.6.1.4.1.119.2.3.3.13.12.1 |
mpRip2IfConfEntryThis is the table entry of mpRip2IfconfTable. MpRip2IfConfEntry .1.3.6.1.4.1.119.2.3.3.13.12.1.1 |
mpRip2IfConfAddressThis object specifies the IP address of the
interface to which the RIP packet is sent.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.12.1.1.1 |
mpRip2IfConfPoisonedThis object specifies the RIP sending mode of
this interface. In case of Sprit Horizon with
Poisoned Reverse, the value '1' is set to this
object. In case of Sprit Horizon, the value '2'
is set to this object.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.12.1.1.2 |
mpRip2IfConfSplitHorizonThe flag about Split-Horizon of this interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.12.1.1.3 |
mpRip2IfConfHostAdvertiseThe flag which shows whether IP address of
interface that condition is Down is transmitted
as Host Route to this Interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.12.1.1.4 |
mpRip2IfConfInOffsetThis object specifies the metric value to be added
to the route information of RIP-response which is
received from this interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.12.1.1.5 |
mpRip2IfConfOutOffsetThis object specifies the metric value to be added
to the route information of RIP-response which is
sent to this interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.12.1.1.6 |
mpRip2IfConfDefTypeThe timing when default route is advertised
to this interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.12.1.1.7 |
mpRip2IfConfDefMetricThe metric value of default route to be used
when the advertised timing(mpRip2IfConfDefType)
is set to 'always'.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.12.1.1.8 |
mpRip2IfConfDefAddressThe next-hop IP addess of default route
to be used when the advertised timing
(mpRip2IfConfDefType) is set to 'always'.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.12.1.1.9 |
mpRip2IfConfDefTagThe route tag of default route to be used
when the advertised timing(mpRip2IfConfDefType)
is set to 'always'.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.12.1.1.10 |
mpRip2IfConfDefProtocolThe protocol of routing table to be used for
condition decision when the advertised timing
(mpRip2IfConfDefType) is set to 'importList'.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.12.1.1.11 |
mpRip2IfConfDefImportListThe route tag of default route to be used
when the advertised timing(mpRip2IfConfDefType)
is set to 'always'.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.12.1.1.12 |
mpRip2IfConfRoutePriorityThe route priority value which is used when
the route information of RIP-response received
from this interface is reflected. The value 0
means route priority is not used for each
interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.12.1.1.13 |
mpRip2PeerTableThe Neighbor information table to transmit
RIP-response with unicast. SEQUENCE OF MpRip2PeerEntry .1.3.6.1.4.1.119.2.3.3.13.12.2 |
mpRip2PeerEntryThe Neighbor information Entry to transmit
RIP-response with unicast. MpRip2PeerEntry .1.3.6.1.4.1.119.2.3.3.13.12.2.1 |
mpRip2PeerAddressThis object specifies IP Address of Neighbor
which transmits RIP-response with unicast.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.12.2.1.1 |
mpRip2PeerVersionThis object specifies version of RIP-response.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.12.2.1.2 |
mpRip2PeerStatusThis object is used to create, delete, or modify
this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.12.2.1.3 |
mpRip2ImportListTableThe table for importing route information
to other routing protocols or RIP. SEQUENCE OF MpRip2ImportListEntry .1.3.6.1.4.1.119.2.3.3.13.12.3 |
mpRip2ImportListEntryThe table for importing route information
to other routing protocols or RIP. MpRip2ImportListEntry .1.3.6.1.4.1.119.2.3.3.13.12.3.1 |
mpRip2ImportListProtocolThis object specifies protocol of IP routing
table.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.12.3.1.1 |
mpRip2ImportListNumberThis object specifies import list number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.12.3.1.2 |
mpRip2ImportListStatusThis object is used to create, delete, or modify
this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.12.3.1.3 |
mpRip2NetworkPriorityTableThe table to specify route priority to each
network at creating IP routing table. SEQUENCE OF MpRip2NetworkPriorityEntry .1.3.6.1.4.1.119.2.3.3.13.12.4 |
mpRip2NetworkPriorityEntryThe entry to specify route priority to each
network at creating IP routing table. MpRip2NetworkPriorityEntry .1.3.6.1.4.1.119.2.3.3.13.12.4.1 |
mpRip2NetworkPriorityAddrThis object specifies network IP address.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.12.4.1.1 |
mpRip2NetworkPriorityMaskThis object specifies network mask.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.12.4.1.2 |
mpRip2NetworkPriorityValueThis object specifies the value of route
priority.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.12.4.1.3 |
mpRip2NetworkPriorityStatusThis object is used to create, delete, or modify
this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.12.4.1.4 |
mpRip2RoutePriorityThe route priority value to be used when the
route information of RIP-response received is
reflected. It is used when the route priority
of interface has not been registered
(mpRip2IfConfRoutePriority is 0) and route
information doesn't correspond to any network
route priority table(mpRip2NetworkPriorityTable).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.12.5 |
mpSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.13 |
mpSnmpCommunityTableThe community table (1-5 entries). This table
lists community strings and their access levels.
When a Snmp message is received by this entity, the
community string in the message is compared with
this table to determine access rights of sender. SEQUENCE OF MpSnmpCommunityEntry .1.3.6.1.4.1.119.2.3.3.13.13.1 |
mpSnmpCommunityEntryA community table entry. MpSnmpCommunityEntry .1.3.6.1.4.1.119.2.3.3.13.13.1.1 |
mpSnmpCommunityIndexThis object specifies the addition/deletion of a
particular trap community. INTEGER .1.3.6.1.4.1.119.2.3.3.13.13.1.1.1 |
mpSnmpCommunityStatusThis object specifies the addition/deletion of a
particular community. Entries 1 and 2 are reserved
for public access( read-only ) and NEC's NMS read
-write. Enumeration .1.3.6.1.4.1.119.2.3.3.13.13.1.1.2 |
mpSnmpCommunityAccessA value of readWrite(2) allows the community to
read and write all objects in the MIB. A value of
readOnly(1) allows the community to read all objs. Enumeration .1.3.6.1.4.1.119.2.3.3.13.13.1.1.3 |
mpSnmpCommunityAddrIP address of the registered NMS. This is actually
a lists of IP addresses, maximum of 5. A special
indexing must be implemented to get all the list
of IP addresses for each entry. IpAddress .1.3.6.1.4.1.119.2.3.3.13.13.1.1.4 |
mpSnmpCommunityNameConfigurable community string with access rights
defined by the value of sysCommunityAccess. DisplayString .1.3.6.1.4.1.119.2.3.3.13.13.1.1.5 |
mpSnmpTrapCommunityTableThe trap receiver table (0 to 5 entries). This
table lists the addresses of stations that should
receive trap messages from this
entity when an exception condition occurs. SEQUENCE OF MpSnmpTrapCommunityEntry .1.3.6.1.4.1.119.2.3.3.13.13.2 |
mpSnmpTrapCommunityEntryA trap receiver table entry. MpSnmpTrapCommunityEntry .1.3.6.1.4.1.119.2.3.3.13.13.2.1 |
mpSnmpTrapCommunityIndexThis object specifies the row for a particular
trap community. INTEGER .1.3.6.1.4.1.119.2.3.3.13.13.2.1.1 |
mpSnmpTrapCommunityStatusThis object specifies the addition/deletion of a
particular trap community. Enumeration .1.3.6.1.4.1.119.2.3.3.13.13.2.1.2 |
mpSnmpTrapCommunityTypeThis object specifies the recipient of a
generated trap. AS of the moment only a
NMS station is supported. Enumeration .1.3.6.1.4.1.119.2.3.3.13.13.2.1.3 |
mpSnmpTrapCommunityAddrFor type NMS,IP address for trap receiver.
(For now type NMS is yet supported).
For telephone,fax, and pager, phone number.
For email, this is an Internet email address. IpAddress .1.3.6.1.4.1.119.2.3.3.13.13.2.1.4 |
mpSnmpTrapCommunityNameCommunity string used for trap messages to this
trap receiver. DisplayString .1.3.6.1.4.1.119.2.3.3.13.13.2.1.5 |
mpSnmpLockMib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.13.3 |
mpSnmpLockMibIPaddressif IPaddress is 0.0.0.0, NMS doesn't SET LockMIB.
if not, only 1 NMS is successing to SET LockMIB.
note : NMS must SET own IPaddress to LockMIB beforerw IpAddress .1.3.6.1.4.1.119.2.3.3.13.13.3.1 |
mpStats OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.14 |
mpMonitorGroupTableMonitoring Group related details. SEQUENCE OF MpMonitorGroupEntry .1.3.6.1.4.1.119.2.3.3.13.14.1 |
mpMonitorGroupEntryDetails for a group of monitored statistics. MpMonitorGroupEntry .1.3.6.1.4.1.119.2.3.3.13.14.1.1 |
mpMonGrpIndexSpecifies the table entry. INTEGER .1.3.6.1.4.1.119.2.3.3.13.14.1.1.1 |
mpMonGrpObjectIdName of the port/module to which the info in the
table entry applies to. OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.14.1.1.2 |
mpMonGrpObjectInstanceInstance to which the info in the table entry
applies to. INTEGER .1.3.6.1.4.1.119.2.3.3.13.14.1.1.3 |
mpMonGrpPollIntInterval at which the polling for values is done. INTEGER .1.3.6.1.4.1.119.2.3.3.13.14.1.1.4 |
mpMonGrpStatusSetting this field to disable deletes the entry from
the list of monitored groups. Enumeration .1.3.6.1.4.1.119.2.3.3.13.14.1.1.5 |
mpMonGrpNameThe text value of the monitor group. For release 1,
read-only but release 2 will allow the user to set
the monitor group name to any textual description. DisplayString .1.3.6.1.4.1.119.2.3.3.13.14.1.1.6 |
mpStatObjectTableObject related statistics details. SEQUENCE OF MpStatObjectEntry .1.3.6.1.4.1.119.2.3.3.13.14.2 |
mpStatObjectEntryDetails of statistics. MpStatObjectEntry .1.3.6.1.4.1.119.2.3.3.13.14.2.1 |
mpStatObjectIndexSpecifies the table entry. INTEGER .1.3.6.1.4.1.119.2.3.3.13.14.2.1.1 |
mpStatObjectGroupIdMonitoring Group that this obj belongs to. INTEGER .1.3.6.1.4.1.119.2.3.3.13.14.2.1.2 |
mpStatObjectIdOID of the object. OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.14.2.1.3 |
mpStatObjectNameTextual equivalent of the object. DisplayString .1.3.6.1.4.1.119.2.3.3.13.14.2.1.4 |
mpStatObjectCurValueCurrent value of the object. INTEGER .1.3.6.1.4.1.119.2.3.3.13.14.2.1.5 |
mpStatObjectCumRateCumulative rate of the object. INTEGER .1.3.6.1.4.1.119.2.3.3.13.14.2.1.6 |
mpStatObjectIntRateRate of change of the objetc's statistics. INTEGER .1.3.6.1.4.1.119.2.3.3.13.14.2.1.7 |
mpCli OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.15 |
mpCliOperatorTableIndicates the table of operator mode user for CLI SEQUENCE OF MpCliOperatorEntry .1.3.6.1.4.1.119.2.3.3.13.15.1 |
mpCliOperatorEntryIndicates the entry of operator mode user
information. MpCliOperatorEntry .1.3.6.1.4.1.119.2.3.3.13.15.1.1 |
mpCliOperatorIndexThis is the index to identify the existing
operator mode user.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.15.1.1.1 |
mpCliOperatorNameThis object is the operator user name.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.15.1.1.2 |
mpCliOperatorPasswdThis object is the operator user password
which is used for user login.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.15.1.1.3 |
mpCliOperatorLoginPasswdThis objects is the operator user password
entered by user at login.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.15.1.1.4 |
mpCliOperatorStatusThis object specifies the addition/deletion of a
operator.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.15.1.1.5 |
mpCliSupervisorTableIndicates the table of supervisor mode user for CLI SEQUENCE OF MpCliSupervisorEntry .1.3.6.1.4.1.119.2.3.3.13.15.2 |
mpCliSupervisorEntryIndicates the entry of supervisor mode user
information. MpCliSupervisorEntry .1.3.6.1.4.1.119.2.3.3.13.15.2.1 |
mpCliSupervisorIndexThis is the index to identify the existing
supervisor mode userro INTEGER .1.3.6.1.4.1.119.2.3.3.13.15.2.1.1 |
mpCliSupervisorNameThis object is the supervisor user name.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.15.2.1.2 |
mpCliSupervisorPasswdThis object is the supervisor user
password which is used for user login.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.15.2.1.3 |
mpCliSupervisorLoginPasswdThis objects is the supervisor user password
entered by user at login.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.15.2.1.4 |
mpCliSupervisorStatusThis object specifies the addition/deletion of a
supervisor.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.15.2.1.5 |
mpAtm OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.16 |
mpAtmInterfaceConfTableThis table contains ATM local interface
configuration parameters, one entry per ATM
interface port. SEQUENCE OF MpAtmInterfaceConfEntry .1.3.6.1.4.1.119.2.3.3.13.16.1 |
mpAtmInterfaceConfEntryThis list contains ATM interface configuration
parameters and state variables. MpAtmInterfaceConfEntry .1.3.6.1.4.1.119.2.3.3.13.16.1.1 |
mpAtmInterfaceIfIndexIndicates the index value to identify the
ATM interface in this equipment. Each ATM
interface identified by this object is the
same interface identified by the same number
of ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.1.1.1 |
mpAtmInterfaceAdminPrefixAn prefix assigned for administrative
purpose. This value is displayed as the
instance of atmInterfaceAdminAddress
object of ATM MIB.rw OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.16.1.1.2 |
mpAtmInterfaceAdminEsiAn ESI assigned for administrative
purpose. This value is displayed as the
instance of atmInterfaceAdminAddress
object of ATM MIB.rw OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.16.1.1.3 |
mpAtmInterfaceMaxVpiVciBitsThis object sets the maximum number of
the sum of VPI/VCI bit number that are
able to use at this interface.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.1.1.4 |
mpAtmVccConfigTableThis table contains VCC configuration
parameters, one entry per ATM interface
port. SEQUENCE OF MpAtmVccConfigEntry .1.3.6.1.4.1.119.2.3.3.13.16.2 |
mpAtmVccConfigEntryThis list contains VCC configuration
parameters and state variables. MpAtmVccConfigEntry .1.3.6.1.4.1.119.2.3.3.13.16.2.1 |
mpAtmVccIfIndexIndicates the index value to identify the
ATM interface in this equipment. Each ATM
interface identified by this object is the
same interface identified by the same number
of ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.2.1.1 |
mpAtmVccFrameFormatThe type of frame format for use
at this ATM interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.2.1.2 |
mpAtmVccF4OamSupportIndicates whether the F4 OAM functionality is
supported or not, for the ATM interface of this
equipment. This object can be modified only when all
the ATM interfaces are blocked. If it is set to '1',
the F5 OAM functionality is supported. If it is set
to '2', it is not supported.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.2.1.3 |
mpAtmVccF5OamSupportIndicates whether the F5 OAM functionality is
supported or not, for the ATM interface of this
equipment. This object can be modified only when all
the ATM interfaces are blocked. If it is set to '1',
the F5 OAM functionality is supported. If it is set
to '2', it is not supported.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.2.1.4 |
mpAtmVccFailTimerLofIt is used to set the timer value of the LOF (Loss
of Frames) failure detection timer (msec). It is
possible to set the integer of a multiple of 100.rw INTEGER -- value = 100*n (n=1,2,3,..,600) .1.3.6.1.4.1.119.2.3.3.13.16.2.1.5 |
mpAtmVccFailTimerLosIt is used to set the timer value of the LOS (Loss
of Signal) failure detection timer (msec). It is
possible to set the integer of a multiple of 100.rw INTEGER -- value = 100*n (n=1,2,3,..,600) .1.3.6.1.4.1.119.2.3.3.13.16.2.1.6 |
mpAtmVccRecoverTimerLofIt is used to set the timer value of the LOF (Loss
of Frames) recovery detection timer (msec). It is
possible to set the integer of a multiple of 100.rw INTEGER -- value = 100*n (n=1,2,3,..,600) .1.3.6.1.4.1.119.2.3.3.13.16.2.1.7 |
mpAtmVccRecoverTimerLosIt is used to set the timer value of the LOS (Loss
of Signal) recovery detection timer (msec). It is
possible to set the integer of a multiple of 100.rw INTEGER -- value = 100*n (n=1,2,3,..,600) .1.3.6.1.4.1.119.2.3.3.13.16.2.1.8 |
mpAtmVccFailTimerLopIt is used to set the timer value of the LOP (Loss
of Pointer) failure detection timer (msec). It is
possible to set the integer of a multiple of 100.rw INTEGER -- value = 100*n (n=1,2,3,..,600) .1.3.6.1.4.1.119.2.3.3.13.16.2.1.9 |
mpAtmVccRecoverTimerLopIt is used to set the timer value of the LOP (Loss
of Pointer) recovery detection timer (msec). It is
possible to set the integer of a multiple of 100.rw INTEGER -- value = 100*n (n=1,2,3,..,600) .1.3.6.1.4.1.119.2.3.3.13.16.2.1.10 |
mpAtmVccCdvIt is used to set the value of CDV(Cell Delay
Variation) which is used for ATM Mega-Link.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.2.1.11 |
mpAtmVccClockModeIt is used to set clock mode of ATM. If it is
set to '1', the clock received from the line is
used. If it is set to '2', the internal clock is
used.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.2.1.12 |
mpAtmSscopConfigTableIndicates the table of SSCOP layer parameter
configuration. SEQUENCE OF MpAtmSscopConfigEntry .1.3.6.1.4.1.119.2.3.3.13.16.3 |
mpAtmSscopConfigEntryIndicates the entry of SSCOP layer configuration. MpAtmSscopConfigEntry .1.3.6.1.4.1.119.2.3.3.13.16.3.1 |
mpAtmSscopIfIndexIndicates the index value to identify the ATM
interface in this equipment. Each ATM interface
identified by this object is the same interface
identified by the same number of ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.3.1.1 |
mpAtmSscopTimerConnectControlIt is used to set the timer value of the SSCOP
connection control PDU re-sending interval timer
(msec). The timer value must be the same as the
that of the equipment connected to itself. It is
possible to set the integer of a multiple of 250.rw INTEGER -- unit = msec -- value = 250*n (n=1,2,3,..,240) -- The default value is recommended by -- ITU-T. .1.3.6.1.4.1.119.2.3.3.13.16.3.1.2 |
mpAtmSscopTimerKeepaliveIt is used to set the timer value of the POLL PDU
re-sending interval timer, which is used when there
is no SD PDU to be sent, in the data transmission
phase (msec). The timer value must be the same as
that of the equipment connected to itself. It is
possible to set the integer of a multiple of 250.rw INTEGER -- unit = msec -- value = 250*n (n=1,2,3,..,240) -- The default value is recommended by -- ITU-T. .1.3.6.1.4.1.119.2.3.3.13.16.3.1.3 |
mpAtmSscopTimerNoResponseIt is used to set the timer value of the STAT PDU
waiting timer (msec). This is the connection
observation timer in the data transmission phase.
When it expires, the connection is disconnected.
The timer value must be the same as that of the
equipment connected to itself. It is possible to
set the integer of a multiple of 250.rw INTEGER -- unit = msec -- value = 250*n (n=1,2,3,..,240) -- The default value is recommended by -- ITU-T. .1.3.6.1.4.1.119.2.3.3.13.16.3.1.4 |
mpAtmSscopTimerPollIt is used to set the timer value of the POLL PDU
sending interval timer in the data transmission
phase (msec). The timer value must be the same as
that of the equipment connected to itself. It is
possible to set the integer of a multiple of 250.rw INTEGER -- unit = msec -- value = 250*n (n=1,2,3,..,240) -- The default value is recommended by -- ITU-T. .1.3.6.1.4.1.119.2.3.3.13.16.3.1.5 |
mpAtmSscopTimerIdleIt is used to set the timer value of the POLL PDU
sending interval timer, which is used when there is
no SD PDU to be sent, in the data transmission phase
(msec). The timer value must be the same as that of
the equipment connected to itself. It is possible
to set the integer of a multiple of 250.rw INTEGER -- unit = msec -- value = 250*n (n=1,2,3,..,240) -- The default value is recommended by -- ITU-T. .1.3.6.1.4.1.119.2.3.3.13.16.3.1.6 |
mpAtmSscopMaxConnectControlIndicates the MAX retry count value of the SSCOP
connection control PDU sending.rw INTEGER -- The default value is recommended by -- ITU-T. .1.3.6.1.4.1.119.2.3.3.13.16.3.1.7 |
mpAtmSscopMaxPdIndicates the sending timing of the POLL PDU. After
the PDUs as many as the number specified by this
object are sent, one POLL PDU is sent.rw INTEGER -- The default value is recommended by -- ITU-T. .1.3.6.1.4.1.119.2.3.3.13.16.3.1.8 |
mpAtmSignalingConfigTableThis table contains ATM Signaling configuration
parameters, one entry per ATM interface port. SEQUENCE OF MpAtmSignalingConfigEntry .1.3.6.1.4.1.119.2.3.3.13.16.4 |
mpAtmSignalingConfigEntryThis list contains ATM signaling configuration
parameters and state variables. MpAtmSignalingConfigEntry .1.3.6.1.4.1.119.2.3.3.13.16.4.1 |
mpAtmSigIfIndexIndicates the index value to identify the
ATM interface in this equipment. Each ATM
interface identified by this object is the
same interface identified by the same number
of ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.4.1.1 |
mpAtmSigSvcSupportFlagIndicates whether the SVC functionality is
supported or not, for the ATM interface of
this equipment. If it is set to '1', SVC
functionality is supported. If it is set to
'2', it is not supported.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.4.1.2 |
mpAtmSigUniVersionThis specifies the ATM Forum UNI version which
is used by the ATM ports of this equipment as
the ATM Signaling functionality. This object
can be set only when all the ATM ports are
closed. It is set to '1' in the case of UNI3.0,
and is set to '2' in the case of UNI3.1.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.4.1.3 |
mpAtmIlmiConfigTableThis table contains ILMI configuration parameters,
one entry per ATM interface port. SEQUENCE OF MpAtmIlmiConfigEntry .1.3.6.1.4.1.119.2.3.3.13.16.5 |
mpAtmIlmiConfigEntryThis list contains ILMI configuration parameters
and state variables. MpAtmIlmiConfigEntry .1.3.6.1.4.1.119.2.3.3.13.16.5.1 |
mpAtmIlmiIfIndexIndicates the index value to identify the
ATM interface in this equipment. Each ATM
interface identified by this object is the
same interface identified by the same number
of ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.5.1.1 |
mpAtmIlmiFlagThis object indicates ILMI Function support
status.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.5.1.2 |
mpAtmStatisticsTableIndicates the table of the statistics data of the
SONET or SDH base ATM interface. SEQUENCE OF MpAtmStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.16.6 |
mpAtmStatisticsEntryIndicates the entry of the statistics data of each
ATM interface. MpAtmStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.16.6.1 |
mpAtmStatIfIndexIndicates the index value to identify the ATM
interface uniquely within the equipment. Each ATM
interface identified by this object is the same
ATM interface identified by the ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.6.1.1 |
mpAtmStatVpiVciErrsIndicates the counter value of the VPI/VCI error.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.2 |
mpAtmStatRcvOverRunErrsIndicates the counter value of the receiving FIFO
over-run error.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.3 |
mpAtmStatInvalidCellErrsIndicates the counter value of the received
invalid cell.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.4 |
mpAtmStatRcvBufEmptysIndicates the counter value of the received free
buffer empty.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.5 |
mpAtmStatRcvStsAlmostFullsIndicates the counter value of the Rx Status Queue
Almost Full.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.6 |
mpAtmStatSndStsAlmostFullsIndicates the counter value of the Tx Status Queue
Almost Full.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.7 |
mpAtmStatOolErrsIndicates OOL(Out of Lock) error counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.8 |
mpAtmStatLocErrsIndicates LOC(Loss Of Cell Delineation) error
counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.9 |
mpAtmStatHecErrsIndicates the ATM cell HEC error counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.10 |
mpAtmStatOcdErrsIndicates OCD(Out Of Cell Delineation) error
counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.11 |
mpAtmStatTcOverFlowErrsIndicates the counter value of the FIFO overflow.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.12 |
mpAtmStatParityErrsIndicates the counter value of the parity error.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.13 |
mpAtmStatC2ErrsIndicates the C2 error counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.14 |
mpAtmStatLopErrsIndicates the LOP(Loss of Pointer) error counter
value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.15 |
mpAtmStatPaisErrsIndicates the Path Alarm Indication error counter
value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.16 |
mpAtmStatPrdiErrsIndicates the Path Remote Path Indication error
counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.17 |
mpAtmStatB3ErrsIndicates the B3 error counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.18 |
mpAtmStatPathFebeErrsIndicates the Path FEBE error counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.19 |
mpAtmStatB2ErrsIndicates the B2 error counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.20 |
mpAtmStatLineFebeErrsIndicates the Line FEBE error counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.21 |
mpAtmStatLaisErrsIndicates the Line Alarm Indication error counter
value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.22 |
mpAtmStatLrdiErrsIndicates the Line Remote Path indication error
counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.23 |
mpAtmStatOofErrsIndicates the OOF(Out of Frame) error counter
value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.24 |
mpAtmStatB1ErrsIndicates the B1 error counter value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.25 |
mpAtmStatLosErrsIndicates the LOS(Loss of Signal) error counter
value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.26 |
mpAtmStatLofErrsInicates the LOF(Loss of Frame) error counter
value.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.27 |
mpAtmStatInPacketsIndicates the counter value of the incoming
packets.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.28 |
mpAtmStatInOctetsIndicates the counter value of the incoming
octets.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.29 |
mpAtmStatOutPacketsIndicates the counter value of the outgoing
packets.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.30 |
mpAtmStatOutOctetsIndicates the counter value of the outgoing
octets.ro Counter .1.3.6.1.4.1.119.2.3.3.13.16.6.1.31 |
mpAtmNetPrefixTableThis table contains network prefix of
ATM address got by ILMI. SEQUENCE OF MpAtmNetPrefixEntry .1.3.6.1.4.1.119.2.3.3.13.16.7 |
mpAtmNetPrefixEntryThis list contains network prefix of
ATM address got by ILMI. MpAtmNetPrefixEntry .1.3.6.1.4.1.119.2.3.3.13.16.7.1 |
mpAtmNetPrefixPortA unique value which identifies the ATM Port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.7.1.1 |
mpAtmNetPrefixPrefixThe network Prefix for ATM address.ro NetPrefix .1.3.6.1.4.1.119.2.3.3.13.16.7.1.2 |
mpAtmNetPrefixStatusIndicates the validity of the network prefix.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.7.1.3 |
mpAtmVpcTableThis table contains VPL configuration
parameters, one entry per ATM interface port. SEQUENCE OF MpAtmVpcEntry .1.3.6.1.4.1.119.2.3.3.13.16.8 |
mpAtmVpcEntryThis list contains VPL configuration
parameters and state variables. MpAtmVpcEntry .1.3.6.1.4.1.119.2.3.3.13.16.8.1 |
mpAtmVpcIfIndexIndicates the index value to identify the
ATM interface in this equipment. Each ATM
interface identified by this object is the
same interface identified by the same number
of ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.8.1.1 |
mpAtmVpcVpiThe VPI value of the VPL.
Note that the VPI=0 is not used
for a VPL not associated with a VCL.
The maximum VPI value cannot
exceed the value allowable by the
atmInterfaceMaxVpiBits.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.8.1.2 |
mpAtmVpcAdminStatusThis object is implemented only for a VPL which
terminates a VPC (i.e.,
one which is NOT cross-connected to other VPLs).
Its value specifies the desired administrative
state of the VPL. The up and down states indicate
that the traffic flow is enabled and disabled
respectively for this VPL.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.8.1.3 |
mpAtmVpcOperStatusThis object indicates the current operational
status of the VPL. The up and down states
indicate that the VPL is currently
operational, or not operational, respectively.
The unknown state indicates that the status of
this VPL cannot be determined.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.8.1.4 |
mpAtmVpcLastChangeThe value of MIB II's sysUpTime object
at the time this VPL entered its current
operational state. If the current state was
entered prior to the last re-initialization of the
agent, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.16.8.1.5 |
mpAtmVpcShapingTypeThis object indicates shaping type used
for VPC status.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.16.8.1.6 |
mpAtmVpcTransmitTrafficDescrIndexThe value of this object identifies the row
of the ATM Traffic Descriptor Table which applies
to the transmit direction of this VCL.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.8.1.7 |
mpAtmVpcRowStatusThis object is used to create, delete or
modify a row in this table. To create
a new VCL, this object is initially set
to 'createAndWait' or 'createAndGo'.
This object must not be set to 'active'
unless the following columnar objects exist
in this row:
atmVclReceiveTrafficDescrIndex,
atmVclTransmitTrafficDescrIndex.
In addition, if the local VCL end-point
is also the VCC end-point:
atmVccAalType.
In addition, for AAL5 connections only:
atmVccAal5CpcsTransmitSduSize,
atmVccAal5CpcsReceiveSduSize, and
atmVccAal5EncapsType.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.16.8.1.8 |
mpAtmTrafficTableThis table contains information on ATM
traffic parameters. SEQUENCE OF MpAtmTrafficEntry .1.3.6.1.4.1.119.2.3.3.13.16.9 |
mpAtmTrafficEntryThis list contains ATM traffic parameters. MpAtmTrafficEntry .1.3.6.1.4.1.119.2.3.3.13.16.9.1 |
mpAtmTrafficDescrParamIndexIndicates the index of ATM traffic entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.9.1.1 |
mpAtmTrafficCdvIndicate the CDV(Cell Delay Variation) valuerw INTEGER .1.3.6.1.4.1.119.2.3.3.13.16.9.1.2 |
mpLis OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.17 |
mpLisNameTableA table that is used for registoring LIS name. SEQUENCE OF MpLisNameEntry .1.3.6.1.4.1.119.2.3.3.13.17.1 |
mpLisNameEntryAn entry of LIS name. MpLisNameEntry .1.3.6.1.4.1.119.2.3.3.13.17.1.1 |
mpLisIndexA number that uniquely assigned to the LIS.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.1.1.1 |
mpLisRtrIndexAn interface number that uniquely assigned to the
LIS of the Unit. The LIS recognized by this number
is the same as what is recognized by same number of
ifIndex.ro INTEGER -- These values are defined by a -- configuration file. .1.3.6.1.4.1.119.2.3.3.13.17.1.1.2 |
mpLisNameA name assigned to the LIS for management purpose.
This object is used for setting or changing a name
of the LIS.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.17.1.1.3 |
mpLisNameStatusThis object is used for registoring or deleting an
entry of the table. 1 is set when registroing and 2
is set when deletion.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.17.1.1.4 |
mpLisAdminTableA table including LIS information. SEQUENCE OF MpLisAdminEntry .1.3.6.1.4.1.119.2.3.3.13.17.2 |
mpLisAdminEntryAn entry in LIS management table.
Registoring LIS
(1) Manager satation generates a LIS entry in
mpLisAdminTable by setting mpLisAdmRowStatus as
createAndWait(5).
(2) Manager station, if necessary, sets value of
management object of mpLisAdminTable.
(3) Manager station enables a LIS entry by setting
mpLisAdmRowStatus as active(1).
Deletion of LIS
(1) Manager station disables a LIS entry bu setting
mpLisAdmRowStatus as notInService(2).
(2) A LIS is deleted by setting mpLisAdmRowStatus as
destroy(6). An agent may release all related
resources at the moment. MpLisAdminEntry .1.3.6.1.4.1.119.2.3.3.13.17.2.1 |
mpLisAdmIndexThis object shows a unique number assigned to this
LIS.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.2.1.1 |
mpLisAdmAtmArpSvExistenceThis object identifies extistence or non-existence
of ATM ARP server. If it exists, 1 is set. If it
does not exist, 2 is set.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.17.2.1.2 |
mpLisAdmAtmArpSvCallTypeThis object shows a type of connection between the
LIS and an ATM ARP server. If it is SVC, 1 is shown.
If it is PVC, 2 is shown.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.17.2.1.3 |
mpLisAdmAtmArpSvAtmAddressThis object assigns ATM address of an ATM ARP
server in the LIS.rw OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.17.2.1.4 |
mpLisAdmAtmArpSvAtmPortNumberThis object assigns a number of ATM port which is
used when the LIS is connected to the ATM server
by PVC. If these are conencted by SVC, this object
shows currently assigned number of ATM port.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.2.1.5 |
mpLisAdmAtmArpSvVpiThis object assigns a number of VPI which is used
when the LIS is connected to the ATM server by PVC.
If these are conencted by SVC, this object shows
currently assigned number of VPI.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.2.1.6 |
mpLisAdmAtmArpSvVciThis object assigns a number of VCI which is used
when the LIS is connected to the ATM server by PVC.
If these are conencted by SVC, this object shows
currently assigned number of VCI.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.2.1.7 |
mpLisAdmSvTrafficIdThis object assigns a number of traffic ID which
is used when the LIS is connected to the ATM server.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.2.1.8 |
mpLisAdmAtmArpSvVcStatusThis object shows status of connection between
the LIS and an ATM ARP server in follwing number:
Open = 1
Being configurated = 2
Available to use = 3
Available to transmit to ATM = 4
Available to transmit and receiving to/from ATM = 5
Available to receive from ATM = 6
Being disconnected = 7
Waiting for disconnection = 8ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.17.2.1.9 |
mpLisAdmAtmArpSvRetryCountThis object shows the number of retrying of
connection request caused by connection failure
between ATM ARP server and the LIS.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.2.1.10 |
mpLisAdmLisStatusThis object shows status of connection between
the LIS and an ATM ARP server in following
number:
the LIS is available = 1
waiting for In-ATM-ARP-request = 2
not available due to failure = 3
not available by configuration = 4ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.17.2.1.11 |
mpLisAdmMyAtmAddressSelThis object assignes ATM address that is used by
the LIS interface.rw OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.17.2.1.12 |
mpLisAdmMyIpAddressThis object assignes IP address that is used by
the LIS interface.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.17.2.1.13 |
mpLisAdmMyNetMaskThis object assignes subnet mask of IP addresss
that is used by the LIS interface.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.17.2.1.14 |
mpLisAdmAtmPortNumberThis object assignes number of ATM port
that is used by the LIS interface.rw IpAddress SYNTAX INTEGER -- @008 .1.3.6.1.4.1.119.2.3.3.13.17.2.1.15 |
mpLisAdmAtmArpTablesThis object shows the number of ARP tables that are
registored in the LIS.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.2.1.16 |
mpLisAdmSndMtuSizeThis object assigns the maximum size of transmitted
AAL5 CPCS PDU payload in octet.rw INTEGER -- The default value is recommended by -- RFC1755. .1.3.6.1.4.1.119.2.3.3.13.17.2.1.17 |
mpLisAdmRcvMtuSizeThis object assigns the maximum size of received
AAL5 CPCS PDU payload in octet.rw INTEGER -- The default value is recommended by -- RFC1755. .1.3.6.1.4.1.119.2.3.3.13.17.2.1.18 |
mpLisAdmTrafficIdThis object shows the number of default traffic ID
that is used by the LIS interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.2.1.19 |
mpLisAdmRowStatusThe object is used for generating, deleting
or modifying a row of the table. In case of
of modifying this entry, this object must be
changed from active(1) to notInService(2).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.17.2.1.20 |
mpLisAtmArpAdminTableThe table includes information of ATM ARP table. SEQUENCE OF MpLisAtmArpAdminEntry .1.3.6.1.4.1.119.2.3.3.13.17.3 |
mpLisAtmArpAdminEntryThe entry includes information of each ATM ARP
table.
Registration of PVC or static SVC
(1) Manager generates an ATM ARP management entry in
mpLisAtmArpAdminTable by setting
mpLisAtmArpAdmRowStatus as createAndWait(5).
(2) Manager sets the number of management object of
mpLisAtmArpAdminTable if necessary.
(3) Manager enables the ATM ARP entry by setting
mpLisAtmArpAdmRowStatus as active(1).
Deletion of PVC or static SVC
(1) Manager disables the ATM ARP entry by setting
mpLisAtmArpAdmRowStatus as notInService(2).
(2) ATM ARP is deleted by setting
mpLisAtmArpAdmRowStatus as destroy(6). An agent
may release all related resources at the moment. MpLisAtmArpAdminEntry .1.3.6.1.4.1.119.2.3.3.13.17.3.1 |
mpLisAtmArpAdmLisIndexThis object shows the unique number assigned to the
LIS.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.3.1.1 |
mpLisAtmArpAdmCallTypeThis object shows the type of connection between
ATM ARP client and the LIS.
If it is dynamic SVC, 1 is shown.
If it is static SVC, 2 is shown.
If it is PVC with aging, 3 is shown.
If it is PVC without aging, 3 is shown.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.17.3.1.2 |
mpLisAtmArpAdmIpAddressThis object is used for configuring or
acknowledging of destination IP address. if the
connection between ATM ARP client and the LIS is
PVC. If the connection is dynamic SVC or static
SVC, the object cannot be set. However it shows
the currently used destination IP address.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.17.3.1.3 |
mpLisAtmArpAdmAtmAddressThis object is used for configuring or
acknowledging of destination ATM address. if the
connection between ATM ARP client and the LIS is
PVC. If the connection is dynamic SVC or static
SVC, the object cannot be set. However it shows
the currently used destination ATM address.rw OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.17.3.1.4 |
mpLisAtmArpAdmMyAtmAddressThis object assigns an ATM address that is used at
the interface of the LIS.ro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.17.3.1.5 |
mpLisAtmArpAdmAtmPortNumberThis object assigns a number of ATM port which is
used when the LIS is connected to the ATM client
by PVC. If these are conencted by dynamic SVC or
static SVC, this object shows currently assigned
number of ATM port.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.3.1.6 |
mpLisAtmArpAdmVpiThis object assigns a number of VPI which is used
when the LIS is connected to the ATM client by PVC.
If these are conencted by dynamic SVC or static SVC,
this object shows currently assigned number of VPI.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.3.1.7 |
mpLisAtmArpAdmVciThis object assigns a number of VCI which is used
when the LIS is connected to the ATM client by PVC.
If these are conencted by dynamic SVC or static SVC,
this object shows currently assigned number of VCI.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.3.1.8 |
mpLisAtmArpAdmTrafficIdThis object shows the number of traffic ID that is
used for PVC connection between ATM ARP cliennt and
the LIS.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.3.1.9 |
mpLisAtmArpAdmTableStatusThis object shows status of ATM ARP table in
follwing number:
the table is available = 1
waiting for acknowledge of being available = 2
waiting for ATM-ARP-reply = 3
waiting for InATM-ARP-reply = 4
aging = 5
not available to service = 6
not available to use = 7ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.17.3.1.10 |
mpLisAtmArpAdmAgingTimeIndicates the passing time value (sec) of the
ATMARP table aging timer. The timer is incre-
mented by 1 sec.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.17.3.1.11 |
mpLisAtmArpAdmRetryCountThis object shows the number of retrying of
connection request caused by connection failure
between ATM ARP client and the LIS.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.3.1.12 |
mpLisAtmArpAdmRowStatusThe object is used for generating, deleting
or modifying a row of the table. In case
of modifying this entry. This object must
be changed from active(1) to notInService(2).rw RowStatus -- INTEGER { active(1), -- notInService(2), notReady(3), -- createAndWait(5), destroy(6) } -- The value 'createAndGo(4)' is not -- supported. .1.3.6.1.4.1.119.2.3.3.13.17.3.1.13 |
mpLisVcAdminTableThe table includes information of VC table. SEQUENCE OF MpLisVcAdminEntry .1.3.6.1.4.1.119.2.3.3.13.17.4 |
mpLisVcAdminEntryThe entry includes information of each VC. MpLisVcAdminEntry .1.3.6.1.4.1.119.2.3.3.13.17.4.1 |
mpLisVcAdmLisIndexThis object shows the unique number assigned to the
LIS.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.4.1.1 |
mpLisVcAdmIpAddressThis object assign the destination IP address.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.17.4.1.2 |
mpLisVcAdmTypeThis object shows the type of VC management table.
If the table is generated by originating connection,
the type is 1. If the table is generated by receiving
connection, the type is 2.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.17.4.1.3 |
mpLisVcAdmVcStatusThis object shows the status of VC connection as
following numbers:
Open = 1
Being configurated = 2
Available to use = 3
Available to transmit to ATM = 4
Available to transmit and receiving to/from ATM = 5
Available to receive from ATM = 6
Being disconected = 7
Waiting for disconection =8ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.17.4.1.4 |
mpLisVcAdmInactivityTimeIndicates the passing time value (sec) of the
inactivity timer. The timer is incremented by
1 sec.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.17.4.1.5 |
mpLisVcAdmHoldingTimeIndicates the remaining time value (sec) of
the holding timer. The timer is incremented
by 1 sec.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.17.4.1.6 |
mpLisStatisticsTableThis object includes statistics information of the
LIS. SEQUENCE OF MpLisStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.17.5 |
mpLisStatisticsEntryThis entry includes counters of each statistics
information. MpLisStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.17.5.1 |
mpLisStatIndexThis object shows the unique number assigned to
the LIS.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.5.1.1 |
mpLisStatAtmArpRequestSendsThis object shows the number of transmission of
ATM ARP request.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.2 |
mpLisStatAtmArpReplyReceivesThis object shows the number of receiving of ATM
ARP reply.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.3 |
mpLisStatAtmArpNakReceivesThis object shows the number of receiving of ATM
ARP NAK.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.4 |
mpLisStatAtmArpReplyTimeoutsThis object shows the number of timed-out in
waiting for ATM ARP reply.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.5 |
mpLisStatInAtmArpRequestSendsThis object shows the number of transmission of
InATM ARP request.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.6 |
mpLisStatInAtmArpReplyReceivesThis object shows the number of receiving of InATM
ARP reply.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.7 |
mpLisStatInAtmArpRequestReceivesThis object shows the number of receiving of InATM
ARP request.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.8 |
mpLisStatInAtmArpReplyTimeoutsThis object shows the number of timed-out in
waiting for InATM ARP reply.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.9 |
mpLisStatVcInactDisconnectsThis object shows the number of disconenction by
inactivity timer.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.10 |
mpLisStatVcResourceDisconnectsThis object shows the number of disconenction by
resource limitation.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.11 |
mpLisStatAtmArpTableAgingoutsThis object show the number of ATM ARP table that
is deleted due to aged out.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.12 |
mpLisStatAtmArpTableDeletionsThis object show the number of ATM ARP table that
is deleted due to resource limitation.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.13 |
mpLisStatInPktsThis object show the number of packets transmitted
to IP router part.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.14 |
mpLisStatInReceivePktsThis object show the number of packets received
from ATM interface.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.15 |
mpLisStatInDiscardsThis object show the number of packets that are
discarded due to resource limitation.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.16 |
mpLisStatInMtuSizeOversThis object show the number of discarded packets
due to exceeding MTU.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.17 |
mpLisStatInSnapErrsThis object show the number of discarded packets
due to format error of SNAP in IP over ATM.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.18 |
mpLisStatOutPktsThis object show the number of packets received
from IP router part.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.19 |
mpLisStatOutTransmitPktsThis object show the number of packets transmitted
to ATM interface.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.20 |
mpLisStatOutNoRoutesThis object show the number of discarded packets
due to route unknown.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.21 |
mpLisStatOutSvFaultsThis object show the number of discarded packets
due to failure of ATM ARP server.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.22 |
mpLisStatOutCircuitFaultsThis object show the number of discarded packets
due to failure of link.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.23 |
mpLisStatOutMaxQueuesThis object show the number of discarded packets
due to overflowing queue.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.24 |
mpLisStatOutDestUnusualsThis object show the number of discarded packets
due to illegal destination.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.25 |
mpLisStatOutMtuSizeOversThis object show the number of discarded packets
that are received from IP router part due to
exceeding MTU.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.26 |
mpLisStatOutVcFailuresThis object show the number of discarded packets
due to configuration failure of connection.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.27 |
mpLisStatOutDiscardsThis object show the number of discarded packets
due to resource limitation in transmitting.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.28 |
mpLisStatOutMaxVcExceedsThis object show the number of discarded packets
due to exceeding the maximum number of VC
connection.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.29 |
mpLisStatVcSetupCountsThis object shows the number of configuring of
call.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.30 |
mpLisStatVcMaxExceedFailCountsThis object shows the number of failure of call
configuration due to exceeding the maximum
simultaneous connections of VC.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.31 |
mpLisStatVcResourceFailCountsThis object shows the number of failure of call
configuration due to resource limitation.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.32 |
mpLisStatVcAcceptCountsThis object shows the number of called by ATM ARP
client.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.33 |
mpLisStatVcMaxExceedDenyCountsThis object shows the number of refusing incoming
call due to exceeding the maximum simultaneous
connections of VC.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.34 |
mpLisStatVcResourceDenyCountsThis object shows the number of refusing incoming
call due to resource limitation.ro Counter .1.3.6.1.4.1.119.2.3.3.13.17.5.1.35 |
mpLisPvcRegistNumberThis object shows the total number of currently
registored PVC.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.6 |
mpLisStSvcRegistNumberThis object shows the total number of currently
registored static SVC.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.7 |
mpLisVcConnectNumberThis object shows the total number of currently
connected VC in IP over ATM functional block.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.8 |
mpLisSysInactivityTimerThis object shows the value of inactivity timer in
second.rw INTEGER -- The default value is recommended by -- RFC1755. .1.3.6.1.4.1.119.2.3.3.13.17.9 |
mpLisSysHoldingTimerThis object shows the value of holding timer in
second.rw INTEGER -- The default value is recommended by -- RFC1755. .1.3.6.1.4.1.119.2.3.3.13.17.10 |
mpLisSysAtmArpReplyTimerThis object shows the value of ATM ARP reply
waiting timer in second.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.11 |
mpLisSysInAtmArpRequestTimerThis object shows the value of In ATM ARP request
waiting timer in second.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.12 |
mpLisSysInAtmArpReplyTimerThis object shows the value of In ATM ARP reply
waiting timer in second.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.13 |
mpLisSysAtmArpAgingTimeThis object sets the aging time of ATM ARP in
second.rw INTEGER -- The default value is recommended by -- RFC1577. .1.3.6.1.4.1.119.2.3.3.13.17.14 |
mpLisSysAtmArpSvPollTimeThis obhject sets cycle time to check status of VC
connection of ATM ARP server in second.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.15 |
mpLisSysAtmArpSvRetryThis object sets the number of retrying in case of
failure of call configuration to ATM ARP server.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.16 |
mpLisSysAtmArpClRetryThis object sets the number of retrying in case of
failure of call configuration to ATM ARP client.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.17 |
mpLisSysAtmArpReqRetryThis object sets tne number of retrying of ATM ARP
request in case of no response from ATM ARP server
to which ATM ARP request is sent before timer
expiration.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.18 |
mpLisSysInAtmArpReqRetryThis object sets tne number of retrying of InATM ARP
request in case of no response from ATM ARP client
to which InATM ARP request is sent before timer
expiration.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.19 |
mpLisSysMaxVcConnectThis object sets the maximum number of simultaneous
connections that is used in IP over ATM functional
block. This number is the sum of PVC, dynamic SVC
and static SVC that are able to connect
simultaneously.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.20 |
mpLisSysMaxQueueNumberThe object sets the maximum number of queues
include packets that are received from IP
router.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.17.21 |
mpDns OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.18 |
mpDnsClientNameServerTableTable of DNS name server IP addresses. SEQUENCE OF MpDnsClientNameServerEntry .1.3.6.1.4.1.119.2.3.3.13.18.1 |
mpDnsClientNameServerEntryEntry of DNS name server IP address. MpDnsClientNameServerEntry .1.3.6.1.4.1.119.2.3.3.13.18.1.1 |
mpDnsClientServerEntIpAddressDNS name server IP address.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.18.1.1.1 |
mpDnsClientServerEntStatusDNS name server table entry status.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.18.1.1.2 |
mpDnsClientStaticRRTableTable of DNS Resource Records(RR). SEQUENCE OF MpDnsClientStaticRREntry .1.3.6.1.4.1.119.2.3.3.13.18.2 |
mpDnsClientStaticRREntryEntry of DNS Resource Record. MpDnsClientStaticRREntry .1.3.6.1.4.1.119.2.3.3.13.18.2.1 |
mpDnsClientStaticRREntIndexIndex of a particular entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.18.2.1.1 |
mpDnsClientStaticRREntHostNameThe RR's host name field.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.18.2.1.2 |
mpDnsClientStaticRREntTimeToLiveThe RR's Time to Live field. Currently,
this value can be set to -1 (infinity) only.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.18.2.1.3 |
mpDnsClientStaticRREntTypeThe RR's type field.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.18.2.1.4 |
mpDnsClientStaticRREntIpAddressThe RR's IP address field.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.18.2.1.5 |
mpDnsClientStaticRREntStatusThe RR's entry status.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.18.2.1.6 |
mpDnsClientLocalDomainTableTable of DNS local domain names. SEQUENCE OF MpDnsClientLocalDomainEntry .1.3.6.1.4.1.119.2.3.3.13.18.3 |
mpDnsClientLocalDomainEntryEntry of DNS local domain name. MpDnsClientLocalDomainEntry .1.3.6.1.4.1.119.2.3.3.13.18.3.1 |
mpDnsClientLocalDomainEntIndexIndex of a particular entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.18.3.1.1 |
mpDnsClientLocalDomainEntNameLocal domain name field.rw DisplayString .1.3.6.1.4.1.119.2.3.3.13.18.3.1.2 |
mpDnsClientLocalDomainEntStatusLocal domain table entry status.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.18.3.1.3 |
mpDnsClientMaxTimeToLiveDNS cache maximum Time to Live(TTL).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.18.4 |
mpDnsClientNumberOfQueriesA counter on how many RR queries have been
sent to name server(s).ro Counter .1.3.6.1.4.1.119.2.3.3.13.18.5 |
mpDnsClientNumberOfResponsesA counter on how many RR responses have been
received from name server(s).ro Counter .1.3.6.1.4.1.119.2.3.3.13.18.6 |
mpLec OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.19 |
mpLecConfigTableIndicates the table of the LEC information. SEQUENCE OF MpLecConfigEntry .1.3.6.1.4.1.119.2.3.3.13.19.1 |
mpLecConfigEntryIndicates the entry of the LEC information. MpLecConfigEntry .1.3.6.1.4.1.119.2.3.3.13.19.1.1 |
mpLecIndexIndicates the index value to identify this entry.ro INTEGER -- .1.3.6.1.4.1.119.2.3.3.13.19.1.1.1 |
mpLecArpCacheDeleteTimeThe aging time for the unused ARP cache entry
(sec).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.1.1.2 |
mpLecUnsolicArpResAcceptIndicate whether the LEC does the address learning
by the LE_ARP_RESPONSE which is broadcasted to
another LEC, or not. If the value 'enabled(1)' is
set, the LEC does the address learning. If the
value 'disabled(2)' is set, the LEC does not do the
address learning.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.19.1.1.3 |
mpLecVccAgingActionIndicate whether the LEC disconnects the unused VCC
for a time defined as C12. The time value is given
by the lecVCCTimeoutPeriod (LEC MIB).
If the value 'noCut(1)' is set, the LEC does not
disconnect the VCC. If the value 'myConnectCut(2)'
is set, the LEC disconnects only the VCC which the
LEC sets up. If the value 'otherConnectCut(3)' is
set, the LEC disconnects only the VCC which the
destination LEC sets up. If the value 'allCut(4)' is
set, the LEC disconnects all the VCCs.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.19.1.1.4 |
mpLecUnknownFrameSendTimingIndicate the timing to send an unknown frame to
the BUS. If the value 'soon(1)' is set, the LEC
sends the packet immediately. If the value 'later(2)'
is set, the LEC sends the packet after a time
defined by mpLeUnknownFrameWaitTime. If the value
'noSend(3)' is set, the LEC does not send the
packet.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.19.1.1.5 |
mpLecTypeIndicates one of the LEC types described as
follows:
a) The LEC defined by ATM Forum
b) The proprietary LEC (serverless method)
defined by NEC.
If it is set to '1', this entry uses the
method defined by ATM Forum. If it is set to
'2', this entry uses the proprietary LEC
defined by NEC.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.19.1.1.6 |
mpLecPrimaryAtmInterfaceIndicates number of ATM port which is used for
decision of primary ATM address.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.1.1.7 |
mpLecDefaultSendTrafficIdIndicates the number of default send traffic ID
that is used by LEC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.1.1.8 |
mpLecAtmAddressSelIndicates SEL of primary ATM address for LECrw OCTET STRING (1) .1.3.6.1.4.1.119.2.3.3.13.19.1.1.9 |
mpLecDefaultRcvTrafficIdIndicates the number of default receive traffic ID
that is used by LEC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.1.1.10 |
mpLecLecsIdIndicates the number of Lecs ID that is used by LEC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.1.1.11 |
mpLecsConfigTableIndicates the table of LECS information. SEQUENCE OF MpLecsConfigEntry .1.3.6.1.4.1.119.2.3.3.13.19.2 |
mpLecsConfigEntryIndicates the table entry of LECS information.
LECS Registration:
1) The object 'mpLecsRowStatus' is set to
'createAndWait(5)', to create LECS entry
into the table 'mpLecsConfigTable'.
2) The appropriate values are set to the object
'mpLecsConfigTable'.
3) 'active(1)' is set to the object
'mpLecRowStatus', to activate the LECS entry.
LECS deletion:
1) 'notInService(2)' is set to the object
'mpLecsRowStatus', to deactivate the LECS
entry.
2) 'destroy(6)' is set to the object
'mpLecRowStatus', to delete the LECS entry. MpLecsConfigEntry .1.3.6.1.4.1.119.2.3.3.13.19.2.1 |
mpLecsIndexIndicates the index value to identify this
table entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.2.1.1 |
mpLecsCallTypeIndicates the type of the connection between
this LEC and the LECS. If it is set to '1',
the type is SVC for ATM address registration.
If it is set to '2', the type is PVC for
VPI/VCI registration.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.19.2.1.2 |
mpLecsAtmAddressIndicates the ATM address of the LECS.rw OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.19.2.1.3 |
mpLecsInterfaceIndicates the ATM interface number to which
the LECS is connected.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.2.1.4 |
mpLecsConfigDirectVpiIndicates the VPI of the Configuration
Direct VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.2.1.5 |
mpLecsConfigDirectVciIndicates the VCI of the Configuration
Direct VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.2.1.6 |
mpLecsConfigDirectSendTrafficIdIndicates the send traffic ID of the Configuration
Direct VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.2.1.7 |
mpLecsRowStatusThis object is used to create, delete,
or modify the row within this table.
Within each conceptual mpLecsConfigTable
row, objects which are writable may be
modified regardless of the value of
mpLecsRowStatus. It is not necessary
to set a row's status to 'notInService'
first.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.19.2.1.8 |
mpLecsConfigDirectRcvTrafficIdIndicates receive the traffic ID of the
Configuration Direct VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.2.1.9 |
mpLecServerConfigTableIndicates the table of the Server
Information. SEQUENCE OF MpLecServerConfigEntry .1.3.6.1.4.1.119.2.3.3.13.19.3 |
mpLecServerConfigEntryIndicates the entry of the Server
Information. MpLecServerConfigEntry .1.3.6.1.4.1.119.2.3.3.13.19.3.1 |
mpLecSvIndexIndicates the lecIndex of the LEC
which corresponds to this entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.1 |
mpLecSvConfigLecsTypeIndicates whether the LECS registered in
the table 'mpLecsConfigTable' is used or
not, when 'automatic(1)' is set to the
object 'lecConfigMode'(LEC MIB).
If it is set to '2', the LECS is not used.
In case when the LECS registered is not used,
the LECS should be specified by the method
defined by ATM Forum.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.19.3.1.2 |
mpLecSvConfigLecsIndexIndicates the 'mpLecsIndex' of the table
'mpLecsConfigTable', to identify the LECS.
This object is valid only when 'enable(1)'
is set to the object 'mpLecsSvConfigLecsType'.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.3 |
mpLecSvLesCallTypeIndicates the type of the connection between
this LEC and the LES.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.19.3.1.4 |
mpLecSvCtrlDirectVccInterfaceIndicates the ATM interface number
on which the Control Direct VCC is set.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.5 |
mpLecSvCtrlDirectVpiIndicates the VPI of this Control Direct VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.6 |
mpLecSvCtrlDirectVciIndicates the VCI of this Control Direct VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.7 |
mpLecSvCtrlDirectSendTrafficIdIndicates the shaper send traffic ID of the Control
Direct VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.8 |
mpLecSvCtrlDistributeVccInterfaceIndicates the ATM interface number on
which the Control Distribute VCC is set.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.9 |
mpLecSvCtrlDistributeVpiIndicates the VPI of the Control Distribute
VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.10 |
mpLecSvCtrlDistributeVciIndicates the VCI of the Control
Distribute VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.11 |
mpLecSvCtrlDistributeSendTrafficIdIndicates the send traffic ID of the Control
Distribute VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.12 |
mpLecSvBusCallTypeIndicates the type of the connection
between this LEC and the BUS. If it is
set to '1', the type is SVC specified by the
address resolution function. If it is set to '2'
the type is PVC for VPI/VCI registration.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.19.3.1.13 |
mpLecSvMcastSendVccInterfaceIndicates the ATM interface number on which
the Multicast Send VCC is set.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.14 |
mpLecSvMcastSendVpiIndicates the VPI of the Multicast
Send VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.15 |
mpLecSvMcastSendVciIndicates the VCI of the Multicast
Send VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.16 |
mpLecSvMcastSendSendTrafficIdIndicates the send traffic ID of the
Multicast Send VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.17 |
mpLecSvMcastForwardVccInterfaceIndicates the ATM interface number on
which the Multicast Forward VCC is set.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.18 |
mpLecSvMcastForwardVpiIndicates the VPI of the Multicast
Forward VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.19 |
mpLecSvMcastForwardVciIndicates the VCI of the Multicast
Forward VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.20 |
mpLecSvMcastForwardSendTrafficIdIndicates the send traffic ID of the Multicast
Forward VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.21 |
mpLecSvCtrlDirectRcvTrafficIdIndicates the shaper receive traffic ID of the
Control Direct VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.22 |
mpLecSvCtrlDistributeRcvTrafficIdIndicates the receive traffic ID of the Control
Distribute VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.23 |
mpLecSvMcastSendRcvTrafficIdIndicates the receive traffic ID of the
Multicast Send VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.24 |
mpLecSvMcastForwardRcvTrafficIdIndicates the receive traffic ID of the Multicast
Forward VCC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.3.1.25 |
mpLeArpTableIndicates the table of the LE-ARP information. SEQUENCE OF MpLeArpEntry .1.3.6.1.4.1.119.2.3.3.13.19.4 |
mpLeArpEntryIndicates the entry of the LE-ARP information.
The LE-ARP address information is registered by the
following procedure ;
1) The NW manager creates LE-ARP table entry in
mpLeArpTable, by setting 'createAndWait(5)' to
LeArpRowStatus.
2) The NW manager sets the appropriate values to
the objects contained in mpLeArpTable.
3) The NW manager activates the LE-ARP table entry,
by setting 'active(1)' to LeArpRowStatus.
The LE-ARP address information is deleted by the
following procedure ;
1) The NW manager inactivates the LE-ARP table
entry, by setting 'notInService(2)' to
LeArpRowStatus.
2) The LE-ARP table entry is deleted, by setting
'destroy(6)' to LeArpRowStatus. MpLeArpEntry .1.3.6.1.4.1.119.2.3.3.13.19.4.1 |
mpLeArpLecIndexIndicates the 'lecIndex' of this client.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.4.1.1 |
mpLeArpMacAddressThe MAC address for which this cache entry
provides a translation.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.19.4.1.2 |
mpLeArpCallTypeIndicates the virtual circuit connection type
of the LE-ARP entry. If it is set to '1', it is
SVC connection. If it is set to '2', it is PVC
connection. It is used to set the connection
type when an entry is added to the object
'mpLeArpTable'.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.19.4.1.3 |
mpLeArpInterfaceIndicates the ATM interface number of this LE-ARP
entry. In case of PVC connection, this object is
used to set and confirm the ATM interface number
which is used. In case of SVC connection, it is
used to display the ATM interface number which is
currently used, but it cannot be used to set.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.4.1.4 |
mpLeArpVpiIndicates the VPI value of this LE-ARP entry.
In case of PVC connection, this object is used to
set and confirm the VPI value which is used. In
case of SVC connection, it is used to display the
VPI value which is currently used, but it cannot
be used to set.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.4.1.5 |
mpLeArpVciIndicates the VCI value of this LE-ARP entry.
In case of PVC connection, this object is used
to set and confirm the VCI value which is used.
In case of SVC connection, it is used to display
the VCI value which is currently used, but it
cannot be used to set.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.4.1.6 |
mpLeArpSendTrafficIdIndicates the send traffic ID which is used by
the LE-ARP entry. In case of PVC connection,
this object is used to set and confirm the
used traffic ID. In case of SVC connection,
it is used to display the used traffic ID,
but it cannot be used to set.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.4.1.7 |
mpLeArpRcvTrafficIdIndicates the receive traffic ID which is used by
the LE-ARP entry. In case of PVC connection,
this object is used to set and confirm the
used traffic ID. In case of SVC connection,
it is used to display the used traffic ID,
but it cannot be used to set.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.4.1.8 |
mpLecStatisticsTableIndicates the table of the LEC statistics
information. SEQUENCE OF MpLecStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.19.5 |
mpLecStatisticsEntryIndicates the entry of statistics information
counters. MpLecStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.19.5.1 |
mpLecStatIndexIndicates the lecindex to identify the
LEC which corresponds to this entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.5.1.1 |
mpLecStatVcSetupSndCountsIndicates the number of the call set-up
done by the LAN Emulation function.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.2 |
mpLecStatVcSetupRcvCountsIndicates the number of the incoming call
received by the LAN Emulation function.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.3 |
mpLecStatVcReleaseSndCountsIndicates the number of the call cleared by
itself, by LAN Emulation function.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.4 |
mpLecStatVcReleaseRcvCountsIndicates the number of the call cleared by
the destination entity, by LAN Emulation
function.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.5 |
mpLecStatInContFrameFailuresIndicates the number of the discarded control
frames received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.6 |
mpLecStatInDataFrameFailuresIndicates the number of discarded data frames
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.7 |
mpLecStatInNarpRequestsIndicates the number of the received LENARP
REQUEST frames.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.8 |
mpLecStatInTopologyRequestsIndicates the number of the received
LE-TOPOLOGY-REQUEST frames.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.9 |
mpLecStatInBusUcastFramesIndicates the number of the unknown unicast
frames received from the BUS.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.10 |
mpLecStatInBusMcastFramesIndicates the number of the multicast
frames received from the BUS.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.11 |
mpLecStatInBusBcastFramesIndicates the number of the broadcast
frames received from the BUS.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.12 |
mpLecStatOutContFrameFailuresIndicates the number of the discarded
control frames to be sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.13 |
mpLecStatOutDataFrameFailuresIndicates the number of the discarded
data frames to be sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.14 |
mpLecStatOutNarpRequestsIndicates the number of the LE-N&RP-
REQUEST frames sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.15 |
mpLecStatOutTopologyRequestsIndicates the number of the LE TOPOLOGY@
REQUEST frames sent.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.16 |
mpLecStatOutBusUcastFramesIndicates the number of the unknown unicast
frames sent to the BUS.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.17 |
mpLecStatOutBusMcastFramesIndicates the number of the multicast frames
sent to the BUS.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.18 |
mpLecStatOutBusBcastFramesIndicates the number of the broadcast frames
sent to the BUS.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.19 |
mpLecStatEchoControlFramesIndicates the number of the echo frames of control
frame. The echo frame is that Lec ID of received
control frame is self Lec IDro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.20 |
mpLecStatInNoIDEntryDataFramesIndicates the number of received data frames without
being switched by IPFE.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.21 |
mpLecStatOutNoIDEntryDataFramesIndicates the number of sent data frames without
being switched by IPFE.ro Counter .1.3.6.1.4.1.119.2.3.3.13.19.5.1.22 |
mpLecElanTotalCountIndicates the number of Emulated LAN
(ELAN) currently configured.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.6 |
mpLecSysMaxVcConnectIndicates the number of the virtual circuits
which are possible to be set simultaneously,
used by LEC function. It is the total number
of PVCs and SVCs which is possible to be
set simultaneously.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.19.7 |
mpMpc OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.20 |
mpMpcCfgTableIndicates the configuration table of the MPC
information. SEQUENCE OF MpMpcCfgEntry .1.3.6.1.4.1.119.2.3.3.13.20.1 |
mpMpcCfgEntryIndicates the configuration entry of the MPC
information. MpMpcCfgEntry .1.3.6.1.4.1.119.2.3.3.13.20.1.1 |
mpMpcCfgIndexIndicates the index of the MPC which corresponds
to this entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.1.1.1 |
mpMpcOperatStatusIndicates the operation status of MPC. It indicates
whether MPC is actually active or not.ro INTEGER -- @008 .1.3.6.1.4.1.119.2.3.3.13.20.1.1.2 |
mpMpcSndTrafficIdIndicate the traffic ID which is specified when
MPC connects VC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.1.1.3 |
mpMpcRcvTrafficIdIndicate the traffic ID which is specified when
MPC connects VC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.1.1.4 |
mpMpcPrtNumThis object assigns a number of ATM port which is
used when the MPC is connected.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.1.1.5 |
mpMpcMaxMpsIndicate the maximum number of MPSs which can be
recognized by MPC. MPC is created so as to recognize
MPS up to the value set by this object.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.1.1.6 |
mpMpcMaxCacheIndicate the maximum number of cache entry which can be
recognized by MPC. MPC is created so as to have cache
up to the value set by this object. Both Ingress cache
and Egress cache are set.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.1.1.7 |
mpMpcCacheCntTableIndicates the MPoA Client cache table which includes
used number of MPC cache managed by agent. SEQUENCE OF MpMpcCacheCntEntry .1.3.6.1.4.1.119.2.3.3.13.20.2 |
mpMpcCacheCntEntryIndicates the MPoA Client cache entry which includes
used number of MPC cache managed by agent. MpMpcCacheCntEntry .1.3.6.1.4.1.119.2.3.3.13.20.2.1 |
mpMpcCacheCntIndexIndicates the index of the MPC which corresponds
to this entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.2.1.1 |
mpMpcIngressCacheCntIndicates the number of Ingress cache which is being
used by MPC. This object is used to know the use for
the value set by mpMpcMaxCache.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.2.1.2 |
mpMpcEgressCacheCntIndicates the number of Egress cache which is being
used by MPC. This object is used to know the use for
the value set by mpMpcMaxCache.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.2.1.3 |
mpMpcMaxReqSelNumIndicates the number of SELs which can be used by
all MPC managed by this agent and which are used
for capsuling IP.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.3 |
mpMpcUseSelNumIndicates the number of SELs which is being used
by all MPC managed by this agent and which are used
for capsuling IP.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.20.4 |
mpStp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.21 |
mpStpVlanTableA table that contains information for the
Spanning Tree Protocol. SEQUENCE OF MpStpVlanEntry .1.3.6.1.4.1.119.2.3.3.13.21.1 |
mpStpVlanEntryA list of information about the Spanning
Tree Protocol. MpStpVlanEntry .1.3.6.1.4.1.119.2.3.3.13.21.1.1 |
mpStpVlanIndexIndicates the index value to identify this
table entry.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.21.1.1.1 |
mpStpVlanProtocolSpecificationAn indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.21.1.1.2 |
mpStpVlanPriorityThe value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.21.1.1.3 |
mpStpVlanTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.119.2.3.3.13.21.1.1.4 |
mpStpVlanTopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter .1.3.6.1.4.1.119.2.3.3.13.21.1.1.5 |
mpStpVlanDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId .1.3.6.1.4.1.119.2.3.3.13.21.1.1.6 |
mpStpVlanRootCostThe cost of the path to the root as seen from
this bridge.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.21.1.1.7 |
mpStpVlanRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.21.1.1.8 |
mpStpVlanMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout .1.3.6.1.4.1.119.2.3.3.13.21.1.1.9 |
mpStpVlanHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout .1.3.6.1.4.1.119.2.3.3.13.21.1.1.10 |
mpStpVlanHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.21.1.1.11 |
mpStpVlanForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
mpStpVlanBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.ro Timeout .1.3.6.1.4.1.119.2.3.3.13.21.1.1.12 |
mpStpVlanBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mpStpVlanBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.119.2.3.3.13.21.1.1.13 |
mpStpVlanBridgeHelloTimeThe value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds.rw Timeout .1.3.6.1.4.1.119.2.3.3.13.21.1.1.14 |
mpStpVlanBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mpStpVlanBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number.rw Timeout .1.3.6.1.4.1.119.2.3.3.13.21.1.1.15 |
mpStpVlanSupportStatusIndicate whether the VLAN supports Spanning Tree
Protocol or not. If the value 'support(1)' is set,
the VLAN supports Spanning Tree Protocol. If the
value 'nonSupport(2)' is set, the VLAN does not support
Spanning Tree Protocol.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.21.1.1.16 |
mpStpPortTableA table that contains port-specific information
for the Spanning Tree Protocol. SEQUENCE OF MpStpPortEntry .1.3.6.1.4.1.119.2.3.3.13.21.2 |
mpStpPortEntryA list of information maintained by every port
about the Spanning Tree Protocol state for that
port. MpStpPortEntry .1.3.6.1.4.1.119.2.3.3.13.21.2.1 |
mpStpPortVlanIndexThe VLAN ID for which this entry contains
Spanning Tree Protocol management information.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.21.2.1.1 |
mpStpPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.21.2.1.2 |
mpStpPortPriorityThe value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
mpStpPort.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.21.2.1.3 |
mpStpPortStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see mpStpPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.21.2.1.4 |
mpStpPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.21.2.1.5 |
mpStpPortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.21.2.1.6 |
mpStpPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId .1.3.6.1.4.1.119.2.3.3.13.21.2.1.7 |
mpStpPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.21.2.1.8 |
mpStpPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId .1.3.6.1.4.1.119.2.3.3.13.21.2.1.9 |
mpStpPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.21.2.1.10 |
mpStpPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter .1.3.6.1.4.1.119.2.3.3.13.21.2.1.11 |
mpLlc OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.22 |
mpLlcSharedVccMaxSduSizeIndicates Maximum SDU size for common VCC which
is managed by LLC. LLC make a common VCC according
to Maximum SDU size set by this MIB object.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.22.1 |
mpLlcAgeOutTimeIndicates no communication time which is used to
judge age out on LLC/SNAP capsulation VCC aging.
The VCC is released when no communication time
of sending/receiving data reach this value.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.22.2 |
mpLlcPvcTableA table contains information of a PVC. SEQUENCE OF MpLlcPvcEntry .1.3.6.1.4.1.119.2.3.3.13.22.3 |
mpLlcPvcEntryA entry indicates a member of PVC information on a ATM interface. MpLlcPvcEntry .1.3.6.1.4.1.119.2.3.3.13.22.3.1 |
mpLlcPvcIdIndexThe value of this object is an index of PVC entry table.
The index indicates the Virtual Circuit Identifier (VC ID).ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.22.3.1.1 |
mpLlcPvcPortThe value of this object identifies an ATM port number.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.22.3.1.2 |
mpLlcPvcVpiThe value of this object identifies a VPI.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.22.3.1.3 |
mpLlcPvcVciThe vaule of this object identifies a VCI.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.22.3.1.4 |
mpLlcPvcSduThe value of this object identifies a Service Data Unit.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.22.3.1.5 |
mpLlcPvcVcPriorityThe object indicates a priority on a specified VC
when VC is not one in a PVC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.22.3.1.6 |
mpLlcPvcForwardTrafficIdThe value of this object identifies a traffic-id for
outgoing at a specified ATM port.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.22.3.1.7 |
mpLlcPvcBackwardTrafficIdThe vaule of this object identifies a traffic-id for
incoming at a specified ATM port.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.22.3.1.8 |
mpLlcPvcAdminStatusThe value of this object indicates status of a VC.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.22.3.1.9 |
mpLlcPvcOperStatusThe object indicates the current operational status
of a VC.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.22.3.1.10 |
mpLlcPvcRowStatusThis object is used to create, delete or modify a row in
this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.22.3.1.11 |
mpOspf OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.23 |
mpOspfGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.23.1 |
mpOspfVersionNumberThe current version number of the OSPF proto-
col is 2.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.1.1 |
mpOspfTOSSupportThe router's support for type-of-service rout-
ing.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.1.2 |
mpOspfExtLsdbLimitThe maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
ospfExtLsdbLimit, the router enters Overflow-
State. The router never holds more than
ospfExtLsdbLimit non-default AS-external-LSAs
in its database. OspfExtLsdbLimit MUST be set
identically in all routers attached to the OSPF
backbone and/or any regular OSPF area. (i.e.,
OSPF stub areas and NSSAs are excluded).ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.1.3 |
mpOspfExitOverflowIntervalThe number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external-LSAs. When
set to 0, the router will not leave Overflow-
State until restarted.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.1.4 |
mpOspfInReceivesThe total number of received error packets.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.1.5 |
mpOspfInErrorsThe number of received error packets.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.1.6 |
mpOspfGlobalTableInformation describing the configured parame-
ters and cumulative statistics of the router's
OSPF process. SEQUENCE OF MpOspfGlobalEntry .1.3.6.1.4.1.119.2.3.3.13.23.2 |
mpOspfGlobalEntryInformation describing the configured parame-
ters and cumulative statistics of the router's
OSPF process. MpOspfGlobalEntry .1.3.6.1.4.1.119.2.3.3.13.23.2.1 |
mpOspfGlobalProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.2.1.1 |
mpOspfGlobalModeStatus of OSPF process.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.2.1.2 |
mpOspfGlobalRouterIdA 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IP interface addresses.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.2.1.3 |
mpOspfGlobalAreaBdrRtrStatusA flag to note whether this router is an area
border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.2.1.4 |
mpOspfGlobalASBdrRtrStatusA flag to note whether this router is config-
ured as an Autonomous System border router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.2.1.5 |
mpOspfGlobalRFC1583CompatibilityIndicates the whether calculation of AS external
route is done with RFC1583 mode or RFC2328 mode.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.2.1.6 |
mpOspfGlobalDefaultRouteTypeIndeicates the timing to advertise default route.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.2.1.7 |
mpOspfGlobalDefMetricThe external cost of default route to be used when
the advertising timing of default route is 'always'.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.2.1.8 |
mpOspfGlobalDefExternalTypeThe external type of default route to be used when
the advertising timing of default route is 'always'.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.2.1.9 |
mpOspfGlobalDefAddressThe forwarding address of default route to be used
when the advertising timing of default route is
'always'.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.2.1.10 |
mpOspfGlobalDefTagThe route tag of default route to be used when the
advertising timing of default route is 'always'.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.2.1.11 |
mpOspfGlobalDefProtocolThe routing protocol of routing table which judges
the condition of import-list When the advertising
timing of default route is 'import-list'.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.2.1.12 |
mpOspfGlobalDefImportListThe import-list number which judges the condition
of import-list When the advertising timing of default
route is 'import-list'.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.2.1.13 |
mpOspfGlobalIntraAreaRoutePriorityThe route priority which is used when intra-area
route is made in IP routing table.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.2.1.14 |
mpOspfGlobalInterAreaRoutePriorityThe route priority which is used when inter-area
route is made in IP routing table.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.2.1.15 |
mpOspfGlobalExternalRoutePriorityThe route priority which is used when AS external
route is made in IP routing table.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.2.1.16 |
mpOspfGlobalMulticastExtensionsA Bit Mask indicating whether the router is
forwarding IP multicast (Class D) datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
Bit 0, if set, indicates that the router can
forward IP multicast datagrams in the router's
directly attached areas (called intra-area mul-
ticast routing).
Bit 1, if set, indicates that the router can
forward IP multicast datagrams between OSPF
areas (called inter-area multicast routing).
Bit 2, if set, indicates that the router can
forward IP multicast datagrams between Auto-
nomous Systems (called inter-AS multicast rout-
ing).
Only certain combinations of bit settings are
allowed, namely: 0 (no multicast forwarding is
enabled), 1 (intra-area multicasting only), 3
(intra-area and inter-area multicasting), 5
(intra-area and inter-AS multicasting) and 7
(multicasting everywhere). By default, no mul-
ticast forwarding is enabled.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.2.1.17 |
mpOspfGlobalDemandExtensionsThe router's support for demand routing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.2.1.18 |
mpOspfGlobalRouterLsaCountThe number of Router (LS type 1) link-state
advertisements in the link-state database.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.2.1.19 |
mpOspfGlobalNetworkLsaCountThe number of Network (LS type 2) link-state
advertisements in the link-state database.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.2.1.20 |
mpOspfGlobalSummaryNetworkLsaCountThe number of Summary Network (LS type 3) link-state
advertisements in the link-state database.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.2.1.21 |
mpOspfGlobalSummaryRouterLsaCountThe number of Summary Router (LS type 4) link-state
advertisements in the link-state database.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.2.1.22 |
mpOspfGlobalExternalLsaCountThe number of external (LS type 5) link-state
advertisements in the link-state database.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.2.1.23 |
mpOspfGlobalExternalLsaCksumSumThe 32-bit unsigned sum of the LS checksums of
the external link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link-state database of two
routers.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.2.1.24 |
mpOspfGlobalReceivesThe number of received packets.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.25 |
mpOspfGlobalReceiveBadAuthsThe number of received packets which were discarded
for authentication error.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.26 |
mpOspfGlobalReceiveBadPacketsThe number of received packets which were discarded
except authentication error.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.27 |
mpOspfGlobalMulticastSendsThe number of multicast sent packets.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.28 |
mpOspfGlobalUnicastSendsThe number of unicast sent packets.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.29 |
mpOspfGlobalSpfRunsThe number of times of the calculation for shortest
path tree.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.30 |
mpOspfGlobalIncSummaryUpdatesThe number of summary incremental updates.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.31 |
mpOspfGlobalIncExternalUpdatesThe number of external incremental updates.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.32 |
mpOspfGlobalLsAgeOutCountsThe number of LSAs which were reached max age.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.33 |
mpOspfGlobalLsFlushCountsThe number of LSAs which max age were set up and
which was removed forcibly.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.34 |
mpOspfGlobalLsdbAllocsThe number of LSAs which were allocated.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.35 |
mpOspfGlobalLsdbFreesThe number of LSAs which were released.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.36 |
mpOspfGlobalBufferAllocFailuresThe number of times that it failed to hunt the
buffer for the packet transmission.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.2.1.37 |
mpOspfImportListTableThe table to import routing information from other
routing protocol to the OSPF process. SEQUENCE OF MpOspfImportListEntry .1.3.6.1.4.1.119.2.3.3.13.23.3 |
mpOspfImportListEntryThe entry to import routing information from other
routing protocol to the OSPF process. MpOspfImportListEntry .1.3.6.1.4.1.119.2.3.3.13.23.3.1 |
mpOspfImportListProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.3.1.1 |
mpOspfImportListProtocolThe protocol of IP routing table.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.3.1.2 |
mpOspfImportListNumberThe import list number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.3.1.3 |
mpOspfImportListStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.3.1.4 |
mpOspfNetworkPriorityTableThe table to specify route priority for each network
at making IP routing table. SEQUENCE OF MpOspfNetworkPriorityEntry .1.3.6.1.4.1.119.2.3.3.13.23.4 |
mpOspfNetworkPriorityEntryThe entry to specify route priority for each network
at making IP routing table. MpOspfNetworkPriorityEntry .1.3.6.1.4.1.119.2.3.3.13.23.4.1 |
mpOspfNetworkPriorityProcessIDThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.4.1.1 |
mpOspfNetworkPriorityAddressThe network address.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.4.1.2 |
mpOspfNetworkPriorityMaskThe network mask.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.4.1.3 |
mpOspfNetworkPriorityValueThe route priority.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.4.1.4 |
mpOspfNetworkPriorityStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.4.1.5 |
mpOspfAreaTableInformation describing the configured parame-
ters and cumulative statistics of the router's
attached areas. SEQUENCE OF MpOspfAreaEntry .1.3.6.1.4.1.119.2.3.3.13.23.5 |
mpOspfAreaEntryInformation describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas. MpOspfAreaEntry .1.3.6.1.4.1.119.2.3.3.13.23.5.1 |
mpOspfAreaProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.5.1.1 |
mpOspfAreaIdA 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.5.1.2 |
mpOspfAreaImportAsExternalThe area's support for importing AS external
link- state advertisements.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.5.1.3 |
mpOspfAreaStubMetricThe metric to be set up to default route which
advertises to stub area.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.5.1.4 |
mpOspfAreaSummaryThe variable ospfAreaSummary controls the im-
port of summary LSAs into stub areas. It has
no effect on other areas.
If it is noAreaSummary, the router will neither
originate nor propagate summary LSAs into the
stub area. It will rely entirely on its de-
fault route.
If it is sendAreaSummary, the router will both
summarize and propagate summary LSAs.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.5.1.5 |
mpOspfAreaConfigIfCountThe number of the registered interfaces.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.5.1.6 |
mpOspfAreaActiveIfCountThe number of the interface during operation.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.5.1.7 |
mpOspfAreaTransitCapabilityIndicates whether it is the area which active
virtual link exists in.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.5.1.8 |
mpOspfAreaTransitNetCountThe number of reachable transit networks.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.5.1.9 |
mpOspfAreaRtrCountThe number of reachable routers.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.5.1.10 |
mpOspfAreaBdrRtrCountThe total number of area border routers reach-
able within this area. This is initially zero,
and is calculated in each SPF Pass.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.5.1.11 |
mpOspfAreaAsBdrRtrCountThe total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.5.1.12 |
mpOspfAreaLsaCountThe total number of link-state advertisements
in this area's link-state database, excluding
AS External LSA's.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.5.1.13 |
mpOspfAreaLsaCksumSumThe 32-bit unsigned sum of the link-state ad-
vertisements' LS checksums contained in this
area's link-state database. This sum excludes
external (LS type 5) link-state advertisements.
The sum can be used to determine if there has
been a change in a router's link state data-
base, and to compare the link-state database of
two routers.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.5.1.14 |
mpOspfAreaStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.5.1.15 |
mpOspfLsdbTableThe OSPF Process's Link State Database. SEQUENCE OF MpOspfLsdbEntry .1.3.6.1.4.1.119.2.3.3.13.23.6 |
mpOspfLsdbEntryA single Link State Advertisement. MpOspfLsdbEntry .1.3.6.1.4.1.119.2.3.3.13.23.6.1 |
mpOspfLsdbProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.6.1.1 |
mpOspfLsdbAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.6.1.2 |
mpOspfLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.6.1.3 |
mpOspfLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.6.1.4 |
mpOspfLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.6.1.5 |
mpOspfLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.6.1.6 |
mpOspfLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.6.1.7 |
mpOspfLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.6.1.8 |
mpOspfLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.23.6.1.9 |
mpOspfAreaRangeTableA range if IP addresses specified by an IP
address/IP network mask pair. For example,
class B address range of X.X.X.X with a network
mask of 255.255.0.0 includes all IP addresses
from X.X.0.0 to X.X.255.255 SEQUENCE OF MpOspfAreaRangeEntry .1.3.6.1.4.1.119.2.3.3.13.23.7 |
mpOspfAreaRangeEntryA range if IP addresses specified by an IP
address/IP network mask pair. For example,
class B address range of X.X.X.X with a network
mask of 255.255.0.0 includes all IP addresses
from X.X.0.0 to X.X.255.255 MpOspfAreaRangeEntry .1.3.6.1.4.1.119.2.3.3.13.23.7.1 |
mpOspfAreaRangeProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.7.1.1 |
mpOspfAreaRangeAreaIdThe Area the Address Range is to be found
within.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.7.1.2 |
mpOspfAreaRangeNetThe IP Address of the Net or Subnet indicated
by the range.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.7.1.3 |
mpOspfAreaRangeMaskThe Subnet Mask that pertains to the Net or
Subnet.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.7.1.4 |
mpOspfAreaRangeEffectSubnets subsumed by ranges either trigger the
advertisement of the indicated summary (adver-
tiseMatching), or result in the subnet's not
being advertised at all outside the area.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.7.1.5 |
mpOspfAreaRangeStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.7.1.6 |
mpOspfHostTableThe list of Hosts, and their metrics, that the
router will advertise as host routes. SEQUENCE OF MpOspfHostEntry .1.3.6.1.4.1.119.2.3.3.13.23.8 |
mpOspfHostEntryA metric to be advertised, for a given type of
service, when a given host is reachable. MpOspfHostEntry .1.3.6.1.4.1.119.2.3.3.13.23.8.1 |
mpOspfHostProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.8.1.1 |
mpOspfHostIpAddressThe IP Address of the Host.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.8.1.2 |
mpOspfHostMetricThe Metric to be advertised.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.8.1.3 |
mpOspfHostStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.8.1.4 |
mpOspfIfTableThe OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF. SEQUENCE OF MpOspfIfEntry .1.3.6.1.4.1.119.2.3.3.13.23.9 |
mpOspfIfEntryThe OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. MpOspfIfEntry .1.3.6.1.4.1.119.2.3.3.13.23.9.1 |
mpOspfIfProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.9.1.1 |
mpOspfIfIndexThis object specifies ifIndex of interface.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.9.1.2 |
mpOspfIfIpAddressThe IP address of this OSPF interface.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.9.1.3 |
mpOspfIfIpMaskThe network mask registered in interface.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.9.1.4 |
mpOspfIfAreaIdA 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.9.1.5 |
mpOspfIfTypeThe OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType. Broad-
cast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25 and similar
technologies take the value 'nbma', and links
that are definitively point to point take the
value 'pointToPoint'.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.9.1.6 |
mpOspfIfMetricThe metric of this interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.9.1.7 |
mpOspfIfRtrPriorityThe priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.9.1.8 |
mpOspfIfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.9.1.9 |
mpOspfIfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.9.1.10 |
mpOspfIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.9.1.11 |
mpOspfIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for all routers attached
to a common network.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.9.1.12 |
mpOspfIfPollIntervalThe larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.9.1.13 |
mpOspfIfStateThe OSPF Interface State.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.9.1.14 |
mpOspfIfDesignatedRouterThe IP Address of the Designated Router.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.9.1.15 |
mpOspfIfBackupDesignatedRouterThe IP Address of the Backup Designated
Router.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.9.1.16 |
mpOspfIfAuthTypeThe authentication type specified for an in-
terface. Additional authentication types may
be assigned locally.rw INTEGER -- none (0), -- simplePassword (1) -- md5 (2) -- reserved for specification by IANA (> 2) .1.3.6.1.4.1.119.2.3.3.13.23.9.1.17 |
mpOspfIfAuthKeyIdThe Key ID to be used when an authentication
type is MD5. The value from 1 to 255 are used
for key ID. 'Get' is not allowed for this
object. The value 0 will be returned as
meaningless value when Get-Request is received
for this object.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.9.1.18 |
mpOspfIfAuthKeyThe Authentication Key. If the Area's Author-
ization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.
Note that unauthenticated interfaces need no
authentication key, and simple password authen-
tication cannot use a key of more than 8 oc-
tets. Larger keys are useful only with authen-
tication mechanisms not specified in this docu-
ment.
When read, ospfIfAuthKey always returns an Oc-
tet String of length zero.rw OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.23.9.1.19 |
mpOspfIfMulticastForwardingThe way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NBMA interfaces, and
setting ospfMulticastForwarding to 0 effective-
ly disables all multicast forwarding.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.9.1.20 |
mpOspfIfDemandIndicates whether Demand OSPF procedures (hel-
lo supression to FULL neighbors and setting the
DoNotAge flag on proogated LSAs) should be per-
formed on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.9.1.21 |
mpOspfIfEventsThe number of times this OSPF interface has
changed its state, or an error has occurred.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.9.1.22 |
mpOspfIfNeighborsThe number of Neighbors.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.9.1.23 |
mpOspfIfAdjacenciesThe number of adjacent Neighbors.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.9.1.24 |
mpOspfIfFullyAdjacenciesThe number of fully adjacent Neighbors.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.9.1.25 |
mpOspfIfLsUpdateFloodsThe number of LS-update floods.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.9.1.26 |
mpOspfIfDelayedAckSendsThe number of LS-Ack floods.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.9.1.27 |
mpOspfIfStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.9.1.28 |
mpOspfVirtIfTableInformation about this router's virtual inter-
faces. SEQUENCE OF MpOspfVirtIfEntry .1.3.6.1.4.1.119.2.3.3.13.23.10 |
mpOspfVirtIfEntryInformation about a single Virtual Interface. MpOspfVirtIfEntry .1.3.6.1.4.1.119.2.3.3.13.23.10.1 |
mpOspfVirtIfProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.10.1.1 |
mpOspfVirtIfIdIdentification which is used to distinguish
virtual link.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.10.1.2 |
mpOspfVirtIfNeighborThe Router ID of the Virtual Neighbor.rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.10.1.3 |
mpOspfVirtIfAreaIdThe Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0rw IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.10.1.4 |
mpOspfVirtIfMetricThe metric until end point router.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.10.1.5 |
mpOspfVirtIfTransitDelayThe estimated number of seconds it takes to
transmit a link- state update packet over this
interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.10.1.6 |
mpOspfVirtIfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets. This
value should be well over the expected round-
trip time.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.10.1.7 |
mpOspfVirtIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.10.1.8 |
mpOspfVirtIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neigh-
bor.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.10.1.9 |
mpOspfVirtIfStateOSPF virtual interface states.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.10.1.10 |
mpOspfVirtIfAuthTypeThe authentication type specified for a virtu-
al interface. Additional authentication types
may be assigned locally.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.10.1.11 |
mpOspfVirtIfAuthKeyIdThe Key ID to be used when an authentication
type is MD5. The value from 1 to 255 are used
for key ID. 'Get' is not allowed for this
object. The value 0 will be returned as
meaningless value when Get-Request is received
for this object.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.10.1.12 |
mpOspfVirtIfAuthKeyIf Authentication Type is simplePassword, the
device will left adjust and zero fill to 8 oc-
tets.
If Authentication Type is md5, the device will
left adjust and zero fill to 16 octets.
Note that unauthenticated interfaces need no
authentication key, and simple password authen-
tication cannot use a key of more than 8 oc-
tets.
When read, mpOspfVirtIfAuthKey always returns a
string of length zero.rw OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.23.10.1.13 |
mpOspfVirtIfEventsThe number of state changes or error events on
this Virtual Link.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.10.1.14 |
mpOspfVirtIfNeighborsThe number of neighbors.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.10.1.15 |
mpOspfVirtIfAdjacenciesThe number of adjacent neighbors.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.10.1.16 |
mpOspfVirtIfFullyAdjacenciesThe number of fully adjacent neighbors.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.10.1.17 |
mpOspfVirtIfLsUpdateFloodsThe number of LS-update floods.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.10.1.18 |
mpOspfVirtIfDelayedAckSendsThe number of LS-Ack floods.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.10.1.19 |
mpOspfVirtIfStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.10.1.20 |
mpOspfNbrTableA table of non-virtual neighbor information. SEQUENCE OF MpOspfNbrEntry .1.3.6.1.4.1.119.2.3.3.13.23.11 |
mpOspfNbrEntryThe information regarding a single neighbor. MpOspfNbrEntry .1.3.6.1.4.1.119.2.3.3.13.23.11.1 |
mpOspfNbrProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.11.1.1 |
mpOspfNbrIfIndexThe ifIndex of interface related to the
neighbior.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.11.1.2 |
mpOspfNbrIpAddressThe IP address this neighbor is using in its
IP Source Address. Note that, on addressless
links, this will not be 0.0.0.0, but the ad-
dress of another of the neighbor's interfaces.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.11.1.3 |
mpOspfNbrRtrIdA 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.11.1.4 |
mpOspfNbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.
Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 1, if set, indicates that the associated
area accepts and operates on external informa-
tion; if zero, it is a stub area.
Bit 2, if set, indicates that the system is ca-
pable of routing IP Multicast datagrams; i.e.,
that it implements the Multicast Extensions to
OSPF.
Bit 3, if set, indicates that the associated
area is an NSSA. These areas are capable of
carrying type 7 external advertisements, which
are translated into type 5 external advertise-
ments at NSSA borders.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.11.1.5 |
mpOspfNbrPriorityThe priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.11.1.6 |
mpOspfNbrCostThe metric to the neighbor which is used for
Point-to-MultiPoint network.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.11.1.7 |
mpOspfNbrStateThe State of the relationship with this Neighbor.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.11.1.8 |
mpOspfNbrPermanenceThis variable displays the status of the en-
try. 'dynamic' and 'permanent' refer to how
the neighbor became known.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.11.1.9 |
mpOspfNbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighbor.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.11.1.10 |
mpOspfNbrSelectedDrThe designated router which neighbor selects.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.11.1.11 |
mpOspfNbrSelectedBdrThe backup designated router which neighbor selects.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.11.1.12 |
mpOspfNbrLsSummaryListLenThe current length of the LS-summary queue.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.11.1.13 |
mpOspfNbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.11.1.14 |
mpOspfNbrLsReqListLenThe current length of the LS-request queue.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.11.1.15 |
mpOspfNbrLsUpdateRetransThe number of times of LS-update re-transmission.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.11.1.16 |
mpOspfNbrDirectAckSendsThe number of times of LS-Ack Unicast transmission.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.11.1.17 |
mpOspfNbrDupUpdateReceivesThe number of times that overlapped LSA was
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.11.1.18 |
mpOspfNbrOldUpdateReceivesThe number of times that old LSA was received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.11.1.19 |
mpOspfNbrDupAckReceivesThe number of times that overlapped LS-Ack was
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.11.1.20 |
mpOspfNbrLossesThe number of times that Neighbor down was
recognized.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.11.1.21 |
mpOspfNbrAdjacencyResetsThe number of times that Adjacency was reset.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.11.1.22 |
mpOspfNbrStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.11.1.23 |
mpOspfVirtNbrTableA table of virtual neighbor information. SEQUENCE OF MpOspfVirtNbrEntry .1.3.6.1.4.1.119.2.3.3.13.23.12 |
mpOspfVirtNbrEntryVirtual neighbor information. MpOspfVirtNbrEntry .1.3.6.1.4.1.119.2.3.3.13.23.12.1 |
mpOspfVirtNbrProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.12.1.1 |
mpOspfVirtNbrIfIdThe ifIndex of Interface which transmits packet
to Neighbor.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.12.1.2 |
mpOspfVirtNbrAreaIdThe Transit Area Identifier.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.12.1.3 |
mpOspfVirtNbrRtrIdA 32-bit integer uniquely identifying the
neighboring router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.12.1.4 |
mpOspfVirtNbrIpAddressThe IP address this Virtual Neighbor is us-
ing.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.12.1.5 |
mpOspfVirtNbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.
Bit 1, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 2, if set, indicates that the system is
Network Multicast capable; ie, that it imple-
ments OSPF Multicast Routing.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.12.1.6 |
mpOspfVirtNbrStateThe state of the Virtual Neighbor Relation-
ship.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.12.1.7 |
mpOspfVirtNbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.3.13.23.12.1.8 |
mpOspfVirtNbrLsSummaryListLenThe current length of the LS-summary queue.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.12.1.9 |
mpOspfVirtNbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.12.1.10 |
mpOspfVirtNbrLsReqListLenThe current length of the LS-request queue.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.23.12.1.11 |
mpOspfVirtNbrLsUpdateRetransThe number of times of LS-update re-transmission.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.12.1.12 |
mpOspfVirtNbrDirectAckSendsThe number of times of LS-Ack unicast transmission.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.12.1.13 |
mpOspfVirtNbrDupUpdateReceivesThe number of times that overlapped LSA was
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.12.1.14 |
mpOspfVirtNbrOldUpdateReceivesThe number of times that old LSA was received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.12.1.15 |
mpOspfVirtNbrDupAckReceivesThe number of times that overlapped LS-Ack was
received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.12.1.16 |
mpOspfVirtNbrLossesThe number of times that Neighbor down was
recognized.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.12.1.17 |
mpOspfVirtNbrAdjacencyResetsThe number of times that Adjacency was reset.ro Counter .1.3.6.1.4.1.119.2.3.3.13.23.12.1.18 |
mpOspfExtLsdbTableThe OSPF Process's Links State Database. SEQUENCE OF MpOspfExtLsdbEntry .1.3.6.1.4.1.119.2.3.3.13.23.13 |
mpOspfExtLsdbEntryA single Link State Advertisement. MpOspfExtLsdbEntry .1.3.6.1.4.1.119.2.3.3.13.23.13.1 |
mpOspfExtLsdbProcessIdThe process ID of OSPF.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.13.1.1 |
mpOspfExtLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.13.1.2 |
mpOspfExtLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.119.2.3.3.13.23.13.1.3 |
mpOspfExtLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.23.13.1.4 |
mpOspfExtLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.13.1.5 |
mpOspfExtLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.13.1.6 |
mpOspfExtLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.23.13.1.7 |
mpOspfExtLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.23.13.1.8 |
mpObsCtl OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.101 |
mpCardInfo OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.102 |
mpInterface OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.103 |
mpPvoice OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.104 |
mpAtmCallCtl OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110 |
mpCes OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.111 |
mpIpsw OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.112 |
mpInsCtl OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.113 |
mpFfr OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.114 |
mpIpswAtm OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.115 |
mpPpp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.120 |
mpPos OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.121 |
mpFrpp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.123 |
mpMpls OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.124 |
mpMcc OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.125 |
mpDetour OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.130 |
mpIpv6 OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.131 |
mpNetwatch OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.132 |
mpNetping OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.133 |