MP-ATM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MP-ATM-MIB.
490
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
490 total| Object Name |
|---|
org OBJECT IDENTIFIER .1.3 |
RFC1213-MIB Unknown .1.3 |
dod OBJECT IDENTIFIER .1.3.6 |
internet OBJECT IDENTIFIER .1.3.6.1 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
nec OBJECT IDENTIFIER .1.3.6.1.4.1.119 |
necProduct OBJECT IDENTIFIER .1.3.6.1.4.1.119.1 |
datax OBJECT IDENTIFIER .1.3.6.1.4.1.119.1.3 |
mmpf OBJECT IDENTIFIER .1.3.6.1.4.1.119.1.3.13 |
mmn9110 OBJECT IDENTIFIER .1.3.6.1.4.1.119.1.3.13.1 |
mmn9120 OBJECT IDENTIFIER .1.3.6.1.4.1.119.1.3.13.2 |
nec-mib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2 |
necProductDepend OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3 |
datax-mib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3 |
mmpf-mib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13 |
mpSystem OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.1 |
mpIfCard OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.2 |
mpEtherPort OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.3 |
mpVlan OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.4 |
mpBridge OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.5 |
mpDbAccess OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.6 |
mpEventLog OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.7 |
mpUiSession OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.8 |
mpFtp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.9 |
mpDhcp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.10 |
mpIp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.11 |
mpRip OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.12 |
mpSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.13 |
mpStats OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.14 |
mpCli OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.15 |
mpAtm OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.16 |
mpLis OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.17 |
mpDns OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.18 |
mpLec OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.19 |
mpMpc OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.20 |
mpStp OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.21 |
mpLlc OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.22 |
mpOspf OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.23 |
mpObsCtl OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.101 |
mpCardInfo OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.102 |
mpInterface OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.103 |
mpPvoice OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.104 |
mpAtmCallCtl OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110 |
mpAtmCCBaseGroup OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.1 |
mpAtmCCNextTrafficDescrIndexA unique value to identify ATM Traffic Descriptor.ro AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.1.1 |
mpAtmCCNextNodeVciA unique value to identify Node VCI.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.1.2 |
mpAtmCCStaticPVPC OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.2 |
mpAtmCCStaticPvpTableStatic-PVP Table SEQUENCE OF MpAtmCCStaticPvpEntry .1.3.6.1.4.1.119.2.3.3.13.110.2.1 |
mpAtmCCStaticPvpEntryStatic-PVP Entry MpAtmCCStaticPvpEntry .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1 |
mpAtmCCStaticPvpIndexA unique value to identify this Static-PVP.
The value is used only 1 (p2p). INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.1 |
mpAtmCCStaticPvpLowIfIndexThe value of this object is equal to MIB II's
ifIndex value of the ATM interface port for this
Static-PVP. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.2 |
mpAtmCCStaticPvpLowVpiThe value of this object is equal to the VPI
value at the ATM interface associated with
the Static-PVP that is identified by
mpAtmCCStaticPvcLowIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVpiBits
at the low ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.3 |
mpAtmCCStaticPvpHighIfIndexThe value of this object is equal to MIB II's
ifIndex value for the ATM interface port for
this static-PVP. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.4 |
mpAtmCCStaticPvpHighVpiThe value of this object is equal to the VPI
value at the ATM interface
associated with the Static-PVP that is
identified by mpAtmCCStaticPvcHighIfIndex.
The VPI value cannot exceed
the number supported by the atmInterfaceMaxVpiBits
at the high ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.5 |
mpAtmCCStaticPvpLowReceiveTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the receive direction of this Static-PVP.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.6 |
mpAtmCCStaticPvpLowTransmitTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the transmit direction of this Static-PVP.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.7 |
mpAtmCCStaticPvpHighReceiveTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the receive direction of this Static-PVP.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.8 |
mpAtmCCStaticPvpHighTransmitTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the transmit direction of this Static-PVP.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.9 |
mpAtmCCStaticPvpPriorityConnection priorityrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.10 |
mpAtmCCStaticPvpLowCladTypeCLAD Typero MpAtmCCCladType .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.11 |
mpAtmCCStaticPvpHighCladTypeCLAD Typero MpAtmCCCladType .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.12 |
mpAtmCCStaticPvpAdminStatusThe value of this object identifies the desired
administrative status of this Static-PVP.
The up and down states indicate that the traffic
flow is enabled and disabled respectively on this
Static-PVP.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.13 |
mpAtmCCStaticPvpOperStatusThe value of this object identifies the desired
operational status of this Static-PVP.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.14 |
mpAtmCCStaticPvpPvpIdThe value of this object identifies the desired
cross connection.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.15 |
mpAtmCCStaticPvpSeqNoOrder information in the cross connection.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.16 |
mpAtmCCStaticPvpPgcRequestIndicates whether this PVP was configureated from
the PVC-Group-Cutover function.
The value of '0' indicates that this PVP was normal.
The value of '!=0' indicates that this PVP was
configrated form PVC-Group-Cutover function.
In this case, the value was indicated the PVC-Group Numberro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.17 |
mpAtmCCStaticPvpCfgStatusConfiguration setting start object. If this object is
set the setting of the configuration is started.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.98 |
mpAtmCCStaticPvpErrInfoObject that the configuration setting result is set up.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.99 |
mpAtmCCStaticPvcTableStatic-PVC Table SEQUENCE OF MpAtmCCStaticPvcEntry .1.3.6.1.4.1.119.2.3.3.13.110.2.2 |
mpAtmCCStaticPvcEntryStatic-PVC Entry MpAtmCCStaticPvcEntry .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1 |
mpAtmCCStaticPvcIndexA unique value to identify this Static-PVC.
The value is used only 1 (p2p). INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.1 |
mpAtmCCStaticPvcLowIfIndexThe value of this object is equal to MIB II's
ifIndex value of the ATM interface port for this
Static-PVC. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.2 |
mpAtmCCStaticPvcLowVpiThe value of this object is equal to the VPI
value at the ATM interface associated with
the Static-PVC that is identified by
mpAtmCCStaticPvcLowIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVpiBits
at the low ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.3 |
mpAtmCCStaticPvcLowVciThe value of this object is equal to the VCI
value at the ATM interface
associated with this Static-PVC that is
identified by mpAtmCCStaticPvcLowIfIndex.
The VCI value cannot exceed the number
supported by the atmInterfaceMaxVciBits
at the low ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.4 |
mpAtmCCStaticPvcHighIfIndexThe value of this object is equal to MIB II's
ifIndex value for the ATM interface port for
this static-PVC. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.5 |
mpAtmCCStaticPvcHighVpiThe value of this object is equal to the VPI
value at the ATM interface
associated with the Static-PVC that is
identified by mpAtmCCStaticPvcHighIfIndex.
The VPI value cannot exceed
the number supported by the atmInterfaceMaxVpiBits
at the high ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.6 |
mpAtmCCStaticPvcHighVciThe value of this object is equal to the VCI
value at the ATM interface
associated with the static-PVC that is
identified by mpAtmCCStaticPvcHighIfIndex.
The VCI value cannot exceed
the number supported by the atmInterfaceMaxVciBits
at the high ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.7 |
mpAtmCCStaticPvcLowReceiveTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the receive direction of this Static-PVC.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.8 |
mpAtmCCStaticPvcLowTransmitTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the transmit direction of this Static-PVC.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.9 |
mpAtmCCStaticPvcHighReceiveTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the receive direction of this Static-PVC.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.10 |
mpAtmCCStaticPvcHighTransmitTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the transmit direction of this Static-PVC.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.11 |
mpAtmCCStaticPvcPriorityConnection priorityrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.12 |
mpAtmCCStaticPvcLowCladTypeCLAD Typero MpAtmCCCladType .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.13 |
mpAtmCCStaticPvcHighCladTypeCLAD Typero MpAtmCCCladType .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.14 |
mpAtmCCStaticPvcAdminStatusThe value of this object identifies the desired
administrative status of this Static-PVC.
The up and down states indicate that the traffic
flow is enabled and disabled respectively on this
Static-PVC.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.15 |
mpAtmCCStaticPvcOperStatusThe value of this object identifies the desired
operational status of this Static-PVC.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.16 |
mpAtmCCStaticPvcPvcIdThe value of this object identifies the desired
cross connection.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.17 |
mpAtmCCStaticPvcSeqNoOrder information in the cross connection.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.18 |
mpAtmCCStaticPvcPgcRequestIndicates whether this PVP was configureated from
the PVC-Group-Cutover function.
The value of '0' indicates that this PVP was normal.
The value of '!=0' indicates that this PVP was
configrated form PVC-Group-Cutover function.
In this case, the value was indicated the PVC-Group Numberro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.19 |
mpAtmCCStaticPvcCfgStatusConfiguration setting start object. If this object is
set the setting of the configuration is started.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.98 |
mpAtmCCStaticPvcErrInfoObject that the configuration setting result is set up.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.99 |
mpAtmCCSoftPVPC OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.3 |
mpAtmCCSoftPvpTableSoft-PVP(Calling) Table SEQUENCE OF MpAtmCCSoftPvpEntry .1.3.6.1.4.1.119.2.3.3.13.110.3.1 |
mpAtmCCSoftPvpEntrySoft-PVP(Calling) Entry MpAtmCCSoftPvpEntry .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1 |
mpAtmCCSoftPvpLeafReferenceA unique value to identify this Soft-PVP.
The value is used only 1 (p2p). INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.1 |
mpAtmCCSoftPvpIfIndexThe value of this object is equal to MIB II's
ifIndex value of the ATM interface port for this
Soft-PVP. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.2 |
mpAtmCCSoftPvpVpiThe value of this object is equal to the VPI
value at the ATM interface associated with
the Soft-PVP that is identified by
mpAtmCCSoftPvpIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVpiBits
at the ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.3 |
mpAtmCCSoftPvpReceiveTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the receive direction of this Soft-PVP.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.4 |
mpAtmCCSoftPvpTransmitTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the transmit direction of this Soft-PVP.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.5 |
mpAtmCCSoftPvpTargetAddressThe target ATM Address of this Soft-PVP. If no
address is supplied, no attempts to establish the
Soft-PVP are initiated.rw AtmAddr .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.6 |
mpAtmCCSoftPvpTargetVpiThe VPI value of the VCL used at the target interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.7 |
mpAtmCCSoftPvpLastReleaseCauseValue of the Cause field of the Cause
Information Element in the last RELEASE
signalling message received for this Soft-PVP.
Indicates the reason for the Release.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.8 |
mpAtmCCSoftPvpLastReleaseDiagnosticValue of the first 8 bytes of diagnostic information
from the Cause field of the Cause Information Element
in the last RELEASE signalling message received for
this Soft-PVP.ro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.9 |
mpAtmCCSoftPvpPriorityConnection priorityrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.10 |
mpAtmCCSoftPvpCladTypeCLAD Typero MpAtmCCCladType .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.11 |
mpAtmCCSoftPvpOriginalAddressThe original ATM Address of this Soft-PVP. If no
address is supplied, no attempts to establish the
Soft-PVP are initiated.ro AtmAddr .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.12 |
mpAtmCCSoftPvpAdminStatusThe value of this object identifies the desired
administrative status of this Soft-PVP.
The up and down states indicate that the traffic
flow is enabled and disabled respectively on this
Soft-PVP.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.13 |
mpAtmCCSoftPvpOperStatusSoft-PVP Oper Status up/down = enable/disablero INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.14 |
mpAtmCCSoftPvpPgcRequestIndicates whether this PVP was configureated from
the PVC-Group-Cutover function.
The value of '0' indicates that this PVP was normal.
The value of '!=0' indicates that this PVP was
configrated form PVC-Group-Cutover function.
In this case, the value was indicated the PVC-Group Numberro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.15 |
mpAtmCCSoftPvpCfgStatusConfiguration setting start object. If this object is
set the setting of the configuration is started.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.98 |
mpAtmCCSoftPvpErrInfoObject that the configuration setting result is set up.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.99 |
mpAtmCCSoftPvcTableSoft-PVC(Calling) Table SEQUENCE OF MpAtmCCSoftPvcEntry .1.3.6.1.4.1.119.2.3.3.13.110.3.2 |
mpAtmCCSoftPvcEntrySoft-PVC(Calling) Entry MpAtmCCSoftPvcEntry .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1 |
mpAtmCCSoftPvcLeafReferenceA unique value to identify this Soft-PVC.
The value is used only 1 (p2p). INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.1 |
mpAtmCCSoftPvcIfIndexThe value of this object is equal to MIB II's
ifIndex value of the ATM interface port for this
Soft-PVC. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.2 |
mpAtmCCSoftPvcVpiThe value of this object is equal to the VPI
value at the ATM interface associated with
the Soft-PVC that is identified by
mpAtmCCSoftPvcIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVpiBits
at the ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.3 |
mpAtmCCSoftPvcVciThe value of this object is equal to the VCI
value at the ATM interface associated with
the Soft-PVC that is identified by
mpAtmCCSoftPvcIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVciBits
at the ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.4 |
mpAtmCCSoftPvcReceiveTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the receive direction of this Soft-PVC.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.5 |
mpAtmCCSoftPvcTransmitTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the transmit direction of this Soft-PVC.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.6 |
mpAtmCCSoftPvcTargetAddressThe target ATM Address of this Soft PVCC. If no
address is supplied, no attempts to establish the
Soft PVCC are initiated.rw AtmAddr .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.7 |
mpAtmCCSoftPvcTargetVpiThe VPI value of the VCL used at the target interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.8 |
mpAtmCCSoftPvcTargetVciThe VCI value of the VCL used at the target interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.9 |
mpAtmCCSoftPvcLastReleaseCauseValue of the Cause field of the Cause
Information Element in the last RELEASE
signalling message received for this Soft PVCC.
Indicates the reason for the Release.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.10 |
mpAtmCCSoftPvcLastReleaseDiagnosticValue of the first 8 bytes of diagnostic information
from the Cause field of the Cause Information Element
in the last RELEASE signalling message received for
this Soft-PVC.ro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.11 |
mpAtmCCSoftPvcPriorityConnection priorityrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.12 |
mpAtmCCSoftPvcCladTypeCLAD Typero MpAtmCCCladType .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.13 |
mpAtmCCSoftPvcOriginalAddressThe origjnal ATM Address of this Soft PVCC. If no
address is supplied, no attempts to establish the
Soft PVCC are initiated.ro AtmAddr .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.14 |
mpAtmCCSoftPvcAdminStatusThe value of this object identifies the desired
administrative status of this Soft-PVC.
The up and down states indicate that the traffic
flow is enabled and disabled respectively on this
Soft-PVC.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.15 |
mpAtmCCSoftPvcOperStatusThe value of this object identifies the desired
operational status of this Soft-PVC.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.16 |
mpAtmCCSoftPvcPgcRequestIndicates whether this PVP was configureated from
the PVC-Group-Cutover function.
The value of '0' indicates that this PVP was normal.
The value of '!=0' indicates that this PVP was
configrated form PVC-Group-Cutover function.
In this case, the value was indicated the PVC-Group Numberro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.17 |
mpAtmCCSoftPvcCfgStatusConfiguration setting start object. If this object is
set the setting of the configuration is started.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.98 |
mpAtmCCSoftPvcErrInfoObject that the configuration setting result is set up.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.99 |
mpAtmCCSoftPvpCalledTableSoft-PVP(Called) Table SEQUENCE OF MpAtmCCSoftPvpCalledEntry .1.3.6.1.4.1.119.2.3.3.13.110.3.3 |
mpAtmCCSoftPvpCalledEntrySoft-PVP(Called) Entry MpAtmCCSoftPvpCalledEntry .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1 |
mpAtmCCSoftPvpCalledLeafReferenceA unique value to identify this Soft-PVP.
The value is used only 1 (p2p). INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.1 |
mpAtmCCSoftPvpCalledIfIndexThe value of this object is equal to MIB II's
ifIndex value of the ATM interface port for this
Soft-PVP. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.2 |
mpAtmCCSoftPvpCalledVpiThe value of this object is equal to the VPI
value at the ATM interface associated with
the Soft-PVP that is identified by
mpAtmCCSoftPvpCalledIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVpiBits
at the ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.3 |
mpAtmCCSoftPvpCalledReceiveTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the receive direction of this Soft-PVP.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.4 |
mpAtmCCSoftPvpCalledTransmitTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the transmit direction of this Soft-PVP.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.5 |
mpAtmCCSoftPvpCalledTargetAddressThe target ATM Address of this Soft-PVP. If no
address is supplied, no attempts to establish the
Soft-PVP are initiated.rw AtmAddr .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.6 |
mpAtmCCSoftPvpCalledTargetVpiThe VPI value of the VCL used at the target interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.7 |
mpAtmCCSoftPvpCalledLastReleaseCauseValue of the Cause field of the Cause
Information Element in the last RELEASE
signalling message received for this Soft-PVP.
Indicates the reason for the Release.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.8 |
mpAtmCCSoftPvpCalledLastReleaseDiagnosticValue of the first 8 bytes of diagnostic information
from the Cause field of the Cause Information Element
in the last RELEASE signalling message received for
this Soft-PVP.ro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.9 |
mpAtmCCSoftPvpCalledPriorityConnection priorityrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.10 |
mpAtmCCSoftPvpCalledCladTypeCLAD Typero MpAtmCCCladType .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.11 |
mpAtmCCSoftPvpCalledOriginalAddressThe original ATM Address of this Soft-PVP. If no
address is supplied, no attempts to establish the
Soft-PVP are initiated.ro AtmAddr .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.12 |
mpAtmCCSoftPvpCalledAdminStatusThe value of this object identifies the desired
administrative status of this Soft-PVP.
The up and down states indicate that the traffic
flow is enabled and disabled respectively on this
Soft-PVP.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.13 |
mpAtmCCSoftPvpCalledOperStatusThe value of this object identifies the desired
operational status of this Soft-PVP.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.14 |
mpAtmCCSoftPvpCalledPgcRequestIndicates whether this PVP was configureated from
the PVC-Group-Cutover function.
The value of '0' indicates that this PVP was normal.
The value of '!=0' indicates that this PVP was
configrated form PVC-Group-Cutover function.
In this case, the value was indicated the PVC-Group Numberro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.15 |
mpAtmCCSoftPvpCalledCfgStatusConfiguration setting start object. If this object is
set the setting of the configuration is started.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.98 |
mpAtmCCSoftPvpCalledErrInfoObject that the configuration setting result is set up.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.99 |
mpAtmCCSoftPvcCalledTableSoft-PVC(Called) Table SEQUENCE OF MpAtmCCSoftPvcCalledEntry .1.3.6.1.4.1.119.2.3.3.13.110.3.4 |
mpAtmCCSoftPvcCalledEntrySoft-PVC(Called) Entry MpAtmCCSoftPvcCalledEntry .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1 |
mpAtmCCSoftPvcCalledLeafReferenceA unique value to identify this Soft-PVC.
The value is used only 1 (p2p). INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.1 |
mpAtmCCSoftPvcCalledIfIndexThe value of this object is equal to MIB II's
ifIndex value of the ATM interface port for this
Soft-PVC. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.2 |
mpAtmCCSoftPvcCalledVpiThe value of this object is equal to the VPI
value at the ATM interface associated with
the Soft-PVC that is identified by
mpAtmCCSoftPvcCalledIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVpiBits
at the ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.3 |
mpAtmCCSoftPvcCalledVciThe value of this object is equal to the VCI
value at the ATM interface associated with
the Soft-PVC that is identified by
mpAtmCCSoftPvcCalledIfIndex.
The VPI value cannot exceed the number
supported by the atmInterfaceMaxVciBits
at the ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.4 |
mpAtmCCSoftPvcCalledReceiveTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the receive direction of this Soft-PVC.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.5 |
mpAtmCCSoftPvcCalledTransmitTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies to the transmit direction of this Soft-PVC.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.6 |
mpAtmCCSoftPvcCalledTargetAddressThe target ATM Address of this Soft PVCC. If no
address is supplied, no attempts to establish the
Soft PVCC are initiated.rw AtmAddr .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.7 |
mpAtmCCSoftPvcCalledTargetVpiThe VPI value of the VCL used at the target interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.8 |
mpAtmCCSoftPvcCalledTargetVciThe VCI value of the VCL used at the target interface.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.9 |
mpAtmCCSoftPvcCalledLastReleaseCauseValue of the Cause field of the Cause
Information Element in the last RELEASE
signalling message received for this Soft PVCC.
Indicates the reason for the Release.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.10 |
mpAtmCCSoftPvcCalledLastReleaseDiagnosticValue of the first 8 bytes of diagnostic information
from the Cause field of the Cause Information Element
in the last RELEASE signalling message received for
this Soft-PVC.ro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.11 |
mpAtmCCSoftPvcCalledPriorityConnection priorityrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.12 |
mpAtmCCSoftPvcCalledCladTypeCLAD Typero MpAtmCCCladType .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.13 |
mpAtmCCSoftPvcCalledOriginalAddressThe original ATM Address of this Soft PVCC. If no
address is supplied, no attempts to establish the
Soft PVCC are initiated.ro AtmAddr .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.14 |
mpAtmCCSoftPvcCalledAdminStatusThe value of this object identifies the desired
administrative status of this Soft-PVC.
The up and down states indicate that the traffic
flow is enabled and disabled respectively on this
Soft-PVC.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.15 |
mpAtmCCSoftPvcCalledOperStatusThe value of this object identifies the desired
operational status of this Soft-PVC.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.16 |
mpAtmCCSoftPvcCalledPgcRequestIndicates whether this PVC was configureated from
the PVC-Group-Cutover function.
The value of '0' indicates that this PVC was normal.
The value of '!=0' indicates that this PVC was
configrated form PVC-Group-Cutover function.
In this case, the value was indicated the PVC-Group Numberro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.17 |
mpAtmCCSoftPvcCalledCfgStatusConfiguration setting start object. If this object is
set the setting of the configuration is started.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.98 |
mpAtmCCSoftPvcCalledErrInfoObject that the configuration setting result is set up.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.99 |
mpAtmCCStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.4 |
mpAtmCCVpStatisticsTableIndicate traffic counter information per connection. SEQUENCE OF MpAtmCCVpStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.1 |
mpAtmCCVpStatisticsEntryEntry of traffic per connection. MpAtmCCVpStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.1.1 |
mpAtmCCVpStatVpiIndicate value for the specific VPI INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.1 |
mpAtmCCVpStatInCellsThe number of receive cells 64 bit counterro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.2 |
mpAtmCCVpStatInCellsCountersThe number of receive cells 32 bit counterro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.3 |
mpAtmCCVpStatOutCellsThe number of transmit cells 64 bit counterro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.4 |
mpAtmCCVpStatOutCellsCountersThe number of transmit cells 32 bit counterro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.5 |
mpAtmCCVpStatInDropCellsThe number of receive drop cells 64 bit counterro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.6 |
mpAtmCCVpStatInDropCellsCountersThe number of receive drop cells 32 bit counterro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.7 |
mpAtmCCVcStatisticsTableIndicate traffic counter information per connection. SEQUENCE OF MpAtmCCVcStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.2 |
mpAtmCCVcStatisticsEntryEntry of traffic per connection. MpAtmCCVcStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.2.1 |
mpAtmCCVcStatVpiIndicate value for the specific VPI INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.1 |
mpAtmCCVcStatVciIndicate value for the specific VCI INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.2 |
mpAtmCCVcStatInCellsThe number of receive cells 64 bit counterro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.3 |
mpAtmCCVcStatInCellsCountersThe number of receive cells 32 bit counterro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.4 |
mpAtmCCVcStatOutCellsThe number of transmit cells 64 bit counterro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.5 |
mpAtmCCVcStatOutCellsCountersThe number of transmit cells 32 bit counterro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.6 |
mpAtmCCVcStatInDropCellsThe number of receive drop cells 64 bit counterro OCTET STRING .1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.7 |
mpAtmCCVcStatInDropCellsCountersThe number of receive drop cells 32 bit counterro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.8 |
mpAtmCCOuspStatisticsTableQuality information by the unit of card.
All entrys are detected by the OUS-P. SEQUENCE OF MpAtmCCOuspStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.3 |
mpAtmCCOuspStatisticsEntryAn entry of mpAtmCCOuspStatisticsTable. MpAtmCCOuspStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.3.1 |
mpAtmCCOuspStatIndexThe index value at this table. It consist of card number. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.1 |
mpAtmCCOuspStatRcvCrcErrCellsCountersThe number of OAM cells received by the port with CRC errors.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.2 |
mpAtmCCOuspStatSendOfifoFullCountersThe number of cells discarded due to Out-FIFO overflow.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.3 |
mpAtmCCOuspStatRcvBufOverCountersThe number of overflow cells at the reveive buffer.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.4 |
mpAtmCCOuspStatRcvUnknownCellsCountersThe number of cells received by the port with unknown cells.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.5 |
mpAtmCCOuspStatRcvInvalidCellsCountersThe number of cells received by the port with invalid cells.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.6 |
mpAtmCCOuspStatSendScheduleErrorCountersThe number of transmission cells discaded due to fail
the schedulingro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.7 |
mpAtmCCOuspStatRcvScheduleErrorCountersThe number of received cells discaded due to fail
the schedulingro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.8 |
mpAtmCCOuspStatSendInvalidCdvCountersThe number of un-scheduling cells due to invalid CDV.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.9 |
mpAtmCCPhyStatisticsTableQuality information by the unit of port.
All entrys are detected by the PHY.
This table are supports for ATM CARDs
NOTE:ATM CARD
ATM-S155, ATM-M155, 2TRK-45, 2TRK6.3I,
ATRK-1.5I, ATRK-192K, 2UNI-VMC, 4ATM-25 SEQUENCE OF MpAtmCCPhyStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.4 |
mpAtmCCPhyStatisticsEntryAn entry of mpAtmCCPhyStatisticsTable. MpAtmCCPhyStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1 |
mpAtmCCPhyStatTmtCellsCountersThe number of cells transmitted regardless of error status.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.1 |
mpAtmCCPhyStatRcvCellsCountersThe number of cells received regardless of error statusro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.2 |
mpAtmCCPhyStatCorrectHecErrCountersThe number of cells reveived by the port with correctable
HEC error.
NOTE: At the 4ATM-25 card, this object incudeing the
mpAtmCCPhyUncountCorrectHecErrCounters.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.3 |
mpAtmCCPhyStatUncorrectHecErrCountersThe number of cells reveived by the port with un-correctable
HEC error.
NOTE: At the 4ATM-25 card, this object is always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.4 |
mpAtmCCPhyStatB1ErrCountersThe number of cells with B1 error.
NOTE: At the 4ATM-25 card, this object is always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.5 |
mpAtmCCPhyStatB2ErrCountersThe number of cells with B2 error.
NOTE: This object is ATM-S155 and ATM-M155 only.
Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.6 |
mpAtmCCPhyStatB3ErrCountersThe number of cells with B3 error
NOTE: This object is ATM-S155 and ATM-M155 only.
Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.7 |
mpAtmCCPhyStatFebeCountersThe number of cells with FEBE error.
NOTE: At the 4ATM-25 card, this object is always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.8 |
mpAtmCCPhyStatSymbolErrCountersThe number of cells with symbol error.
NOTE: This object is 4ATM-25 only.
Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.9 |
mpAtmCCPhyStatParityErrCountersThe number of cells with parity error.
NOTE: At the 4ATM-25 card, this object is always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.10 |
mpAtmCCPortAlarmStatisticsTableTable of port alarm infomation. SEQUENCE OF MpAtmCCPortAlarmStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.5 |
mpAtmCCPortAlarmStatisticsEntryAn entry of mpAtmCCPortAlarmStatisticsTable. MpAtmCCPortAlarmStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1 |
mpAtmCCPortAlarmStatRedLosCountersTotal number of LOS alarm detected by HW.
NOTE: This object is
ATM-S155, ATM-M155, 2ATM-45,
2UNI-VMC, 2TRK-6.3I, 4TRK-1.5I
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.1 |
mpAtmCCPortAlarmStatRedLofCountersTotal number of LOF alarm detected by HW.
NOTE: This object is
ATM-S155, ATM-M155, 2TRK-6.3I, 4TRK-1.5I
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.2 |
mpAtmCCPortAlarmStatRedMsAisCountersTotal number of MS-AIS alarm detected by HW.
NOTE: This object is
ATM-S155, ATM-M155
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.3 |
mpAtmCCPortAlarmStatRedLopCountersTotal number of LOP alarm detected by HW.
NOTE: This object is
ATM-S155, ATM-M155
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.4 |
mpAtmCCPortAlarmStatRedPAisCountersTotal number of P-AIS alarm detected by HW.
NOTE: This object is
ATM-S155, ATM-M155
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.5 |
mpAtmCCPortAlarmStatRedLocCountersTotal number of LOC alarm detected by HW.
NOTE: This object is
ATM-S155, ATM-M155
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.6 |
mpAtmCCPortAlarmStatRedResetCountersTotal number of Reset alarm detected by HW.
NOTE: This object is
ATM-S155, ATM-M155
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.7 |
mpAtmCCPortAlarmStatRedCcRedCountersTotal number of CC-RED alarm detected by HW.
NOTE: This object is ATM CARDs only.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.8 |
mpAtmCCPortAlarmStatRedOofCountersTotal number of OOF alarm detected by HW.
NOTE: This object is 2ATM-45 only.
Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.9 |
mpAtmCCPortAlarmStatRedAisCountersTotal number of AIS alarm detected by HW.
NOTE: This object is
2ATM-45, 2TRK-6.3I, 4TRK-1.5I
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.10 |
mpAtmCCPortAlarmStatRedPOofCountersTotal number of P-OOF alarm detected by HW.
NOTE: This object is 2ATM-45, 2TRK-6.3I, 4TRK-1.5I
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.11 |
mpAtmCCPortAlarmStatRedBadSigCountersTotal number of Bad-sig alarm detected by HW.
NOTE: This object is 4ATM-45 only.
Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.12 |
mpAtmCCPortAlarmStatRedLcdCountersTotal number of LCD alarm detected by HW.
NOTE: This object is
2UNI-VMC, 2TRK-6.3I, 4TRK-1.5I, 2TRK-192K
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.13 |
mpAtmCCPortAlarmStatRedLinkAisCountersTotal number of LINK-AIS alarm detected by HW.
NOTE: This object is
2TRK-6.3I, 4TRK-1.5I, 2TRK-192K
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.14 |
mpAtmCCPortAlarmStatRedInfo0CountersTotal number of INDO0 alarm detected by HW.
NOTE: This object is 2TRK-192KI only.
Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.15 |
mpAtmCCPortAlarmStatYelMsRdiCountersTotal number of MS-RDI alarm detected by HW.
NOTE: This object is
ATM-S155, ATM-M155
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.16 |
mpAtmCCPortAlarmStatYelPRdiCountersTotal number of P-RDI alarm detected by HW.
NOTE: This object is
ATM-S155, ATM-M155
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.17 |
mpAtmCCPortAlarmStatYelCcYelCountersTotal number of CC-YEL alarm detected by HW.
NOTE: This object is ATM CARDs only.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.18 |
mpAtmCCPortAlarmStatYelRaiCountersTotal number of RAI alarm detected by HW.
NOTE: This object is
2ATM-45, 2TRK-6.3I, 4TRK-1.5I
only. Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.19 |
mpAtmCCPortAlarmStatYelPRaiCountersTotal number of P-RAI alarm detected by HW.
NOTE: This object is 2ATM-45 only.
Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.20 |
mpAtmCCPortAlarmStatYelInfo2CountersTotal number of INFO2 alarm detected by HW.
NOTE: This object is 2TRK-192KI only.
Other cards are always ZERO.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.21 |
mpAtmCCVpTunnellingStatisticsTableThis table indicate traffic counter information
per VP-tunnelling. SEQUENCE OF MpAtmCCVpTunnellingStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.6 |
mpAtmCCVpTunnellingStatisticsEntryAn entry of mpAtmCCVpTunnellingStatisticsTable. MpAtmCCVpTunnellingStatisticsEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.6.1 |
mpAtmCCVpTunStatTmtCellsCountersThe number of cells transmitted regardless of error status.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.6.1.1 |
mpAtmCCVpTunStatRcvCellsCountersThe number of cells received regardless of error statusro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.6.1.2 |
mpAtmCCVccStatisticsRegTableIndicate traffic counter information per connection. SEQUENCE OF MpAtmCCVccStatisticsRegEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.7 |
mpAtmCCVccStatisticsRegEntryEntry of traffic per connection. MpAtmCCVccStatisticsRegEntry .1.3.6.1.4.1.119.2.3.3.13.110.4.7.1 |
mpAtmCCVccStatRegVpiIndicate value for the specific VPI INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.1 |
mpAtmCCVccStatRegVciIndicate value for the specific VCI INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.2 |
mpAtmCCVccStatRegInCellsCountersThe number of receive cellsro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.3 |
mpAtmCCVccStatRegOutCellsCountersThe number of transmit cellsro Counter .1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.4 |
mpAtmCCVccStatRegStatusThis variable indicates the registratoin status.
- 'start', which indicates that start and collecting the
taffic information.
- 'stop', which indicates that stopn and delete the traffic
information.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.5 |
mpAtmCCVccStatRegErrInfoIndicats the result of setting to the
mpAtmCCVccStatRegStatus.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.99 |
mpAtmCCResourceControl OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.5 |
mpAtmCCPortResourceInfomationTableThis table indicate the resource infomation at the
ATM port.
NOTE:
This table is supported the physical port only. SEQUENCE OF MpAtmCCPortResourceInfomationEntry .1.3.6.1.4.1.119.2.3.3.13.110.5.1 |
mpAtmCCPortResourceInfomationEntryEntry of mpAtmCCPortResourceInfomationTable. MpAtmCCPortResourceInfomationEntry .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1 |
mpAtmCCPortResInfoPortSpeedThe port's bandwidth in bit per second at this ATM port.ro Gauge .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.1 |
mpAtmCCPortResInfoMaxVpiBitsThe number of VPI bits at this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.2 |
mpAtmCCPortResInfoMaxVciBitsThe number of VCI bits at this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.3 |
mpAtmCCPortResInfoMaxVPCThe maximum number of VPCs ( PVPs and SVPs )
supported at this port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.4 |
mpAtmCCPortResInfoMaxVCCThe maximum number of VCCs ( PVCs and SVCs )
supported at this port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.5 |
mpAtmCCPortResInfoMaxSvpcVpiThe maximum VPI that the signaling stack on
the ATM interface is configured to support for
allocation to switched virtual path connections.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.6 |
mpAtmCCPortResInfoMaxSvccVpiThe maximum VPI that the signaling stack on
the ATM interface is configured to support for
allocation to switched virtual channel connections.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.7 |
mpAtmCCPortResInfoMinSvccVciThe minimum VPI that the signalling stack is
configured to support for allocation to switched
virtual channel connections.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.8 |
mpAtmCCPortResInfoShaperKindThe kind of shaper at this port.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.9 |
mpAtmCCPortResInfoVpTunnellingConfigIndicates whether the vp-tunnelling is configered
at this port.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.10 |
mpAtmCCPortResInfoSvccVciHuntWayThis value indicates the way of VCI use at the SVCs.
The value low2high indicates that hunt the lowest not-used
VCI when received the SETUP message.
The value low2high indicates that hunt the highest not-used
VCI when received the SETUP message.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.11 |
mpAtmCCPortResInfoVpiCountersThe number of using VPIs at this port.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.12 |
mpAtmCCPortResInfoVpcCountersThe number of VPCs ( PVPs and SVPs )
established at this port.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.13 |
mpAtmCCPortResInfoVccCountersThe number of VCCs ( PVCs and SVCs )
established at this port.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.14 |
mpAtmCCPortBandwidthInfomationTableThis table indicate that infom the bandwidth at
the ATM port. SEQUENCE OF MpAtmCCPortBandwidthInfomationEntry .1.3.6.1.4.1.119.2.3.3.13.110.5.2 |
mpAtmCCPortBandwidthInfomationEntryEntry of mpAtmCCPortBandwidthInfomationTable. MpAtmCCPortBandwidthInfomationEntry .1.3.6.1.4.1.119.2.3.3.13.110.5.2.1 |
mpAtmCCPortBwInfoVpiA index value at this table. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.1 |
mpAtmCCPortBwInfoRawBandwidthBpsAdminsitratively desired bandwidth size
in kilo bit per second for this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.2 |
mpAtmCCPortBwInfoRawBandwidthCpsAdminsitratively desired bandwidth size
in cell per second for this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.3 |
mpAtmCCPortBwInfoTmitUsedBwCpsThe current using transmission bandwidth value ( total of
assigned bandwidth for each connections ) in cell per
second for this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.4 |
mpAtmCCPortBwInfoRcvUsedBwCpsThe current using receved bandwidth value ( total of
assigned bandwidth for each connections ) in cell per
second for this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.5 |
mpAtmCCPortBwInfoVciCountersThe number of using VCIs at this port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.6 |
mpAtmCCBwInfoPortTableThis table indicate the resource infomation at the
ATM port and vp-tunneling port SEQUENCE OF MpAtmCCBwInfoPortEntry .1.3.6.1.4.1.119.2.3.3.13.110.5.3 |
mpAtmCCBwInfoPortEntryEntry of mpAtmCCBwInfoPortTable. MpAtmCCBwInfoPortEntry .1.3.6.1.4.1.119.2.3.3.13.110.5.3.1 |
mpAtmCCBwInfoPortRawBandwidthBpsAdminsitratively desired bandwidth size
in kilo bit per second for this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.1 |
mpAtmCCBwInfoPortRawBandwidthCpsAdminsitratively desired bandwidth size
in cell per second for this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.2 |
mpAtmCCBwInfoPortTmitUsedBwCpsThe current using transmission bandwidth value ( total of
assigned bandwidth for each connections ) in cell per
second for this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.3 |
mpAtmCCBwInfoPortRcvUsedBwCpsThe current using receved bandwidth value ( total of
assigned bandwidth for each connections ) in cell per
second for this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.4 |
mpAtmCCBwInfoPortTmitRemainBwCpsThe current remaining transmission bandwidth value (
total of assigned bandwidth for each connections ) in
cell per second for this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.5 |
mpAtmCCBwInfoPortRcvRemainBwCpsThe current remaining receved bandwidth value ( total
of assigned bandwidth for each connections ) in cell
per second for this ATM port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.6 |
mpAtmCCBwInfoPortVpTunnelingVP-Tunneling indication.
1:VP-Tunneling
2:Not VP-Tunnelingro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.7 |
mpAtmCCProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.6 |
mpAtmCCSscopTableSSCOP parameter Table SEQUENCE OF MpAtmCCSscopEntry .1.3.6.1.4.1.119.2.3.3.13.110.6.1 |
mpAtmCCSscopEntryEntry of mpATMCCSscopTable. MpAtmCCSscopEntry .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1 |
mpAtmCCSscopTimerPollExpert variable: timer in milliseconds
(default is 750 msecs for Uni 3.1).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.1 |
mpAtmCCSscopTimerNoResponceExpert variable: timer in milliseconds
(default is 7000 msecs for Uni 3.1).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.2 |
mpAtmCCSscopTimerKeepAliveExpert variable: timer in milliseconds
(default is 2000 msecs for Uni 3.1).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.3 |
mpAtmCCSscopTimerIdleExpert variable: timer in milliseconds
(default is 1500 msecs for Uni 3.1).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.4 |
mpAtmCCSscopTimerCcExpert variable: timer in milliseconds
(default is 1000 msecs for Uni 3.1).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.5 |
mpAtmCCSscopMaxCcExpert variable
(default is 4 for Uni 3.1).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.6 |
mpAtmCCSscopMaxPdExpert variable
(default is 25 for Uni 3.1).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.7 |
mpAtmCCSscopMaxStatExpert variable
(default is 67 for Uni 3.1).rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.8 |
mpAtmCCSscopClearBuffsExpert variable.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.9 |
mpAtmCCSscopCreditExpert variable.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.10 |
mpAtmCCIlmiTableILMI parameter Table SEQUENCE OF MpAtmCCIlmiEntry .1.3.6.1.4.1.119.2.3.3.13.110.6.2 |
mpAtmCCIlmiEntryEntry of mpATMCCIlmiTable. MpAtmCCIlmiEntry .1.3.6.1.4.1.119.2.3.3.13.110.6.2.1 |
mpAtmCCIlmiConfigStatusIndicates whether ilmi is currently enabled at
this interface.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.6.2.1.1 |
mpAtmCClmiMaxTransmissionsIn a situation where a request is not receiving
a response within
mpAtmCCLimiRetransmitInterval, the number of
consecutive transmissions/non-responses that will
cause the UME to declare a loss of ILMI
connectivity
This variable is intended to promote
interoperability, so no range restriction is
given.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.2.1.2 |
mpAtmCCIlmiRetransmitIntervalThe time in seconds between retransmissions of
ILMI requests
This variable is intended to promote
interoperability, so no range restriction is
given.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.2.1.3 |
mpAtmCCSignallingTableILMI parameter Table SEQUENCE OF MpAtmCCSignallingEntry .1.3.6.1.4.1.119.2.3.3.13.110.6.3 |
mpAtmCCSignallingEntryEntry of mpATMCCSignallingTable. MpAtmCCSignallingEntry .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1 |
mpAtmCCSignallingT301Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.1 |
mpAtmCCSignallingT303Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.2 |
mpAtmCCSignallingT308Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.3 |
mpAtmCCSignallingT309Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.4 |
mpAtmCCSignallingT310Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.5 |
mpAtmCCSignallingT313Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.6 |
mpAtmCCSignallingT316Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.7 |
mpAtmCCSignallingT317Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.8 |
mpAtmCCSignallingT322Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.9 |
mpAtmCCSignallingT331Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.10 |
mpAtmCCSignallingT397Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.11 |
mpAtmCCSignallingT398Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.12 |
mpAtmCCSignallingT399Expert variable: timer in secondsrw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.13 |
mpAtmCCProtocolTrapInfoTableATM Protocol Control Trap Infomation tabale SEQUENCE OF MpAtmCCProtocolTrapInfoEntry .1.3.6.1.4.1.119.2.3.3.13.110.6.4 |
mpAtmCCProtocolTrapInfoEntryEntry of mpATMCCProtocolTrapInfoTable. MpAtmCCProtocolTrapInfoEntry .1.3.6.1.4.1.119.2.3.3.13.110.6.4.1 |
mpAtmCCProtocolTrapInfoIndexThe index value at this tablero INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.4.1.1 |
mpAtmCCProtocolTrapInfoCauseIndicates why this trap sendro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.6.4.1.2 |
mpAtmCCPathTrace OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.7 |
mpAtmCCVccStatusTableThis table indicate the vcc status infomation at the
ATM port. SEQUENCE OF MpAtmCCVccStatusEntry .1.3.6.1.4.1.119.2.3.3.13.110.7.1 |
mpAtmCCVccStatusEntryEntry of mpAtmCCVccStatusTable. MpAtmCCVccStatusEntry .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1 |
mpAtmCCVccStatusOrgPortSpecified PORT number. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.1 |
mpAtmCCVccStatusOrgVpiSpecified VPI number. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.2 |
mpAtmCCVccStatusOrgVciSpecified VCI number. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.3 |
mpAtmCCVccStatusDestPortDestination PORT number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.4 |
mpAtmCCVccStatusDestVpiDestination VPI number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.5 |
mpAtmCCVccStatusDestVciDestination VCI number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.6 |
mpAtmCCVccStatusPathKindPath classification.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.7 |
mpAtmCCVccStatusOrgCallKindPort classification for specified an edge point.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.8 |
mpAtmCCVccStatusDestCallKindPort classification for destination an edge point.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.9 |
mpAtmCCVccStatusAdminStatusControl status.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.10 |
mpAtmCCVccStatusOperStatusConnection status.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.11 |
mpAtmCCVccStatusInsStatusINS detour indication.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.12 |
mpAtmCCVccStatusOrgPortVpTunnelingOriginal port VP-Tunneling indication.
1:VP-Tunneling
2:Not VP-Tunnelingro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.13 |
mpAtmCCVccStatusDestPortVpTunnelingDestination port VP-Tunneling indication.
1:VP-Tunneling
2:Not VP-Tunnelingro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.14 |
mpAtmCCVccStatusConnCastTypeThe type of topology of a connection (point-
to-point, point-to-multipoint).ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.15 |
mpAtmCCPvcTraceControlTableThis is the table type object of the
PVC PathTrace registration. SEQUENCE OF MpAtmCCPvcTraceCtlEntry .1.3.6.1.4.1.119.2.3.3.13.110.7.2 |
mpAtmCCPvcTraceCtlEntryEntry of mpAtmCCPvcTraceInfoTable. MpAtmCCPvcTraceCtlEntry .1.3.6.1.4.1.119.2.3.3.13.110.7.2.1 |
mpAtmCCPvcTraceIndexThe value of this object identifies the
PVC PathTrace collection number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.1 |
mpAtmCCPvcTraceCtlPathKindThe value of this object identifies the
path kind.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.2 |
mpAtmCCPvcTraceCtlIfIndexThe value of this object identifies the
interface number.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.3 |
mpAtmCCPvcTraceCtlVpiThe value of this object identifies the
VPI number.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.4 |
mpAtmCCPvcTraceCtlVciThe value of this object identifies the
VCI number.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.5 |
mpAtmCCPvcTraceCtlStatusThe value of this object identifies the
PVC PathTrace condition.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.6 |
mpAtmCCPvcTraceInfoTableThis is the table type object of the
PVC PathTrace information. SEQUENCE OF MpAtmCCPvcTraceInfoEntry .1.3.6.1.4.1.119.2.3.3.13.110.7.3 |
mpAtmCCPvcTraceInfoEntryEntry of mpAtmCCPvcTraceInfoTable. MpAtmCCPvcTraceControlEntry SYNTAX MpAtmCCPvcTraceInfoEntry .1.3.6.1.4.1.119.2.3.3.13.110.7.3.1 |
mpAtmCCPvcTraceEntryIndexThe value of this object identifies the
inside index of PVC PathTrace information. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.1 |
mpAtmCCPvcTraceInfoSysNameThe value of this object identifies the
node name.ro DisplayString .1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.2 |
mpAtmCCPvcTraceInfoIfIndexThe value of this object identifies the
interface number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.3 |
mpAtmCCPvcTraceInfoVpiThe value of this object identifies the
VPI number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.4 |
mpAtmCCPvcTraceInfoVciThe value of this object identifies the
VCI number.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.5 |
mpAtmCCPvcTraceInfoPathKindThe value of this object identifies the
path kind.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.6 |
mpAtmCCPvcTraceInfoCallKindThe value of this object identifies the
connection type.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.7 |
mpAtmCCPvcTraceInfoLastSegmentThe value of this object identifies the
last segment.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.8 |
mpAtmCCMuxMib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.8 |
mpAtmCCMuxStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.8.1 |
mpAtmCCMuxStatReceiveCellsCountersCounter of MUX receive cells.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.8.1.1 |
mpAtmCCMuxStatReceiveCellsCntOvfCountersOverflow counter of MUX receive cells counter.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.8.1.2 |
mpAtmCCMuxStatDiscardCellsBufOvfCountersDiscard cell counter on buffer overflow.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.8.1.3 |
mpAtmCCMuxStatDiscardCellsBufOvfCntOvfCountersOverflow counter of discard cell counter on buffer overflow.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.8.1.4 |
mpAtmCCMuxStatDiscardCellsHTErrCountersDiscard cell counter on header transration error.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.8.1.5 |
mpAtmCCMuxStatDiscardCellsHTErrCntOvfCountersOverflow counter of discard cell counter on header transration error.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.8.1.6 |
mpAtmCCMuxStatDiscardCellsThresholdOvfCountersDiscard cell counter on threshold overflow.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.8.1.7 |
mpAtmCCMuxStatDiscardCellsThresholdOvfCntOvfCountersOverflow counter of discard cell counter on threshold overflow.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.8.1.8 |
mpAtmCCVpTunneling OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.9 |
mpAtmCCVpTunnelingTableVP-Tunneling parameter Table SEQUENCE OF MpAtmCCVpTunnelingEntry .1.3.6.1.4.1.119.2.3.3.13.110.9.1 |
mpAtmCCVpTunnelingEntryEntry of mpAtmCCVpTunnelingTable. MpAtmCCVpTunnelingEntry .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1 |
mpAtmCCVpTunnelingVpiSpecified VPI number. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.1 |
mpAtmCCVpTunnelingAdminStatusControl status.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.2 |
mpAtmCCVpTunnelingOperStatusConnection status.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.3 |
mpAtmCCVpTunnelingSpeedVP bandwidth(kbps).ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.4 |
mpAtmCCVpTunnelingNeighborInfoNeighbor Info(ifIndex).ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.5 |
mpAtmCCVpTunnelingPnniVerPNNI Signaling version.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.6 |
mpAtmCCVpTunnelingContinuityCheckContinuity Check.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.7 |
mpAtmCCVpTunnelingTrapStateTrap State.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.8 |
mpAtmCCVpTunnelingSeveritySeverity.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.9 |
mpAtmCCVpTunnelingCfgStatusConfiguration setting start object. If this object is
set the setting of the configuration is started.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.98 |
mpAtmCCVpTunnelingErrInfoObject that the configuration setting result is set up.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.99 |
mpAtmCCPathTest OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.10 |
mpAtmCCPathTestTableThis Table is control for the PATH TEST(F5 OAM CELL)
function SEQUENCE OF MpAtmCCPathTestEntry .1.3.6.1.4.1.119.2.3.3.13.110.10.1 |
mpAtmCCPathTestEntryEntry of mpAtmCCPathTestTable. MpAtmCCPathTestEntry .1.3.6.1.4.1.119.2.3.3.13.110.10.1.1 |
mpAtmCCPathTestVpiIndex value for the specific VPIro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.1 |
mpAtmCCPathTestVciIndex value for the specific VCIro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.2 |
mpAtmCCPathTestStatusThe value of this object identifies the desired status of this table.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.3 |
mpAtmCCPathTestSendDirectionIndicate the direction which send the F5 OAM cells.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.4 |
mpAtmCCPathTestSendTimeThe amount of time this path will send the F5 OAM cells.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.5 |
mpAtmCCPathTestSendCellsCountersA amount of the number of F5 OAM cells sending.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.6 |
mpAtmCCPathTestRcvCellsCountersA aomut of the number of F5 OAN cells received.ro Counter .1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.7 |
mpAtmCCPathTestErrInfoA additonal infomation for the error-response.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.99 |
mpAtmCCPvcGroupCutover OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.11 |
mpAtmCCPvcGroupCutoverBaseInfo OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.11.1 |
mpAtmCCPvcGroupCutoverEnableSpecifies whether the node is currently operating the
PVC-Group-CutOver functions. If the value is 'false', then it
can not support the PVC-Group-CutOver service. This attribute
reflects the node configration data in the PVC-Group-CutOver
Service Request State and functiins condition.
It can change only Command Line Interface(CLI).
(Node reboot is indispensable chage to the PVC-Group-CutOver
Service Request Status )ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.11.1.1 |
mpAtmCCPvcGroupCutoverStatusThe current status of PVC-Group-Cutover function status.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.11.1.2 |
mpAtmCCUnitePvcGroup OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.11.2 |
mpAtmCCUpgcBaseInfo OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.11.2.1 |
mpAtmCCUpgcTotalGroupNumberThe total number of registerd to Unite Pvc Group in this node.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.2.1.1 |
mpAtmCCUpgcBaseActiveGroupNumberThe number of active Unite Pvc Group.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.2.1.2 |
mpAtmCCUnitePvcGroupControlTableThis table contains the control of the Unite Pvc Group objects SEQUENCE OF MpAtmCCUpgcCtlEntry .1.3.6.1.4.1.119.2.3.3.13.110.11.2.2 |
mpAtmCCUpgcCtlEntryAn entry in the mpAtmCCUpgcCtlTable. MpAtmCCUpgcCtlEntry .1.3.6.1.4.1.119.2.3.3.13.110.11.2.2.1 |
mpAtmCCUpgcIndexThe Unite Pvc Group identifier for this node.
A value assigned to a node in this node that uniquely
identifies in the MIB.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.2.2.1.1 |
mpAtmCCUpgcCtlStatusThis variable indicates the Control Status of this Unite
Pvc Group.
- 'register', which indicates that request to careate a
new instance (Unite PVC Group) in the node.
- 'active', which indicates that the Unite Pvc Group is
connected.
- 'inactive', which indicates that the Unite Pvc Group is
disconnected.
- 'delete', which indicates that request to delete the Unite
Pvc Group.
- 'stsInactive', which indicates that request to only the
status is change to 'inactive'. This request is not
disconnect the connecting PVC's.
- 'underEstablish', which indicates that the under the
connecting progress in the Unite Pvc Group.
- 'underDeactivate', which indicates that the under the
disconnecting progress in the Unite Pvc Group.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.11.2.2.1.2 |
mpAtmCCUpgcCtlCountPgcThe total number of registered Pvc Group in the Unite Pvc Group.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.2.2.1.3 |
mpAtmCCUpgcCtlResultIndicate the result at which process the Unite Pvc Group
CutOver.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.2.2.1.4 |
mpAtmCCUnitePvcGroupRegisterTableThis table uesd that register the Pvc Group for the Unite Pvc
Group. SEQUENCE OF MpAtmCCUpgcRegiEntry .1.3.6.1.4.1.119.2.3.3.13.110.11.2.3 |
mpAtmCCUpgcRegiEntryAn entry in the mpAtmCCUpgcRegiTable. MpAtmCCUpgcRegiEntry .1.3.6.1.4.1.119.2.3.3.13.110.11.2.3.1 |
mpAtmCCUpgcPgcIndexThe Index value for specified the Pvc Group that
to add (or delete) from Unite Pvc Group.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.2.3.1.1 |
mpAtmCCUpgcRegiStatusThis variable indicates the ragistratoin Status the PVC
Groupe to specified the Unite Pvc Group.
- 'add', which indicates that add the Pvc group to Unite
Pvc Group.
- 'delete', which indicates that delete the Pvc group to
Unite Pvc Group.
- 'enable', which indicates that ragisterd the Pvc group
in the Unite Pvc Group.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.11.2.3.1.2 |
mpAtmCCPvcGroup OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.11.3 |
mpAtmCCPgcBaseInfo OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.1 |
mpAtmCCPgcTotalGroupNumberThe total number of registerd to Pvc Group in this node.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.1.1 |
mpAtmCCPvcGroupControlTableThis table contains the control of the Pvc Group objects SEQUENCE OF MpAtmCCPgcCtlEntry .1.3.6.1.4.1.119.2.3.3.13.110.11.3.2 |
mpAtmCCPgcCtlEntryAn entry in the mpAtmCCPgcCtlTable. MpAtmCCPgcCtlEntry .1.3.6.1.4.1.119.2.3.3.13.110.11.3.2.1 |
mpAtmCCPgcIndexThe Pvc Group identifier for this node. A value assigned
to a node in this node that uniquely identifies in the MIB.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.2.1.1 |
mpAtmCCPgcCtlStatusThis variable indicates the Control Status of this Pvc
Group.
- 'register', which indicates that request to careate a
new instance (PVC Group) in the node.
- 'active', which indicates that the Pvc Group is connected.
- 'inactive', which indicates that the Pvc Group is
disconnected.
- 'delete', which indicates that request to delete the Pvc
Group.
- 'stsInactive', which indicates that request to only the
status is change to 'inactive'. This request is not
disconnect the connecting PVC's.
- 'underEstablish', which indicates that the under the
connecting progress in the Pvc Group.
- 'underDeactivate', which indicates that the under the
disconnecting progress in the Pvc Group.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.11.3.2.1.2 |
mpAtmCCPgcCtlCountPvcThe total number of registered Pvc in the Pvc Group.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.2.1.3 |
mpAtmCCPgcCtlResultIndicate the result at which process the Pvc Group CutOver.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.2.1.4 |
mpAtmCCPvcGroupRegisterTableThis table uesd that register the Pvc for the Pvc Group. SEQUENCE OF MpAtmCCPgcRegiEntry .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3 |
mpAtmCCPgcRegiEntryAn entry in the mpAtmCCPgcRegiTable. MpAtmCCPgcRegiEntry .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1 |
mpAtmCCPgcPvcIfIndexThe value of this object is equal to MIB II's ifIndex value
of the ATM interface port for this pvc in PVC Group. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.1 |
mpAtmCCPgcPvcVpiThe VPI value of the pvc in PVC Group. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.2 |
mpAtmCCPgcPvcVciThe VCI value of the pvc in PVC Group.
The value of 0 can used with PVP. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.3 |
mpAtmCCPgcPvcKindThis object is indicates the kind of pvc.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.4 |
mpAtmCCPgcStaticPvcDestIfIndexThe value of this object is equal to MIB II's ifIndex value
of the distination ATM interface port.
This value is not relevant when the value of mpAtmCCPgcPvcKind
is 'softPvc'.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.5 |
mpAtmCCPgcSoftPvcDestAtmAddressThe distinaniton ATM address of this pvc in the PVC Group.
This value is not relevant when the value of mpAtmCCPgcPvcKind
is 'staticPvc'.rw INTEGER @008 change SYNTAX AtmAddr -- @008 change .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.6 |
mpAtmCCPgcPvcDestVpiThe VPI value of the distination pvc.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.7 |
mpAtmCCPgcPvcDestVciThe VCI value of the distination pvc.
When the value of mpAtmCCPgcPvcVci is 0, the value of
this object is accept 0 only.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.8 |
mpAtmCCPgcPvcReceiveTrafficDescrIndexThe value of this ofject identifies the row of the ATM
Traffic Descriptor Table which applies to the receive
direction of this pvc in PVC Group.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.9 |
mpAtmCCPgcPvcTransmitTrafficDescrIndexThe value of this ofject identifies the row of the ATM
Traffic Descriptor Table which applies to the transmit
direction of this pvc in PVC Group.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.10 |
mpAtmCCPgcPvcPriorityThe value of this ofject identifies the connect priority
of the pvc in the PVC Grouprw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.11 |
mpAtmCCPgcStaticPvcIdThe value of this object identifies the Static-PVC IDENTIFY
the pvc in the PVC Group.
This value is not relevant when the value of mpAtmCCPgcPvcKind
is 'softPvc'.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.12 |
mpAtmCCPgcStaticPvcSeqNoThe value of this object identifies the Sequence Number of
the static-pvc in the PvcGroup.
This value is not relevant when the value of mpAtmCCPgcPvcKind
is 'softPvc'.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.13 |
mpAtmCCPgcSoftPvcCallKindThe value of this object identifies the call kind of the
soft-pvc in the PvcGroup.
This value is not relevant when the value of mpAtmCCPgcPvcKind
is 'staticPvc'.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.14 |
mpAtmCCPgcRegiAdminStatusThe value of this object identifies the desired administrative
status of this pvc in the PVC Group.
- 'inactive', which indicates that request to disconnect the
pvc.
- 'active', which indicates that request to connect the pvc.
- 'stsInactive', which indicates that request to only a
status is change, not disconnect the pvc.
- 'connectWait', which indicates that connecting progress at
this pvc.
- 'disconnectWait', which indicates that disconnecting
progress at this pvc.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.15 |
mpAtmCCPgcRegiCfgStatusThe value of this object identifies the desired configration
status of this pvc in the PVC Group.
- 'enable', which indicates that set to the configration
- 'cancel', which indicates that request to clear the
procedure
- 'delete', which indicates that deleted form the configration
- 'unkown',rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.16 |
mpAtmCCPgcRegiErrInfoThe value of this object indicate the result of set request.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.17 |
mpAtmCCPvcGroupActiveInfoTableConfirm to the PVC Group that status is active. SEQUENCE OF MpAtmCCPgcActInfoEntry .1.3.6.1.4.1.119.2.3.3.13.110.11.3.4 |
mpAtmCCPgcActInfoEntryThe entry of mpAtmCCPvcGroupActiveInfoTable. MpAtmCCPgcActInfoEntry .1.3.6.1.4.1.119.2.3.3.13.110.11.3.4.1 |
mpAtmCCPgcActGrpNumThe number of the PVC Group that status is active.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.11.3.4.1.1 |
mpAtmCCAtmMulticast OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.12 |
mpAtmCCAtmMulticastRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.110.12.1 |
mpAtmCCAtmMultiRootIfIndexThe value of this object is equal to MIB II's ifIndex value
of the ATM interface port.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.1.1 |
mpAtmCCAtmMultiRootVpiThe VPI value of the Multicast-Root-PVC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.1.2 |
mpAtmCCAtmMultiRootVciThe VCI value of the Multicast-Root-PVC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.1.3 |
mpAtmCCAtmMultiLeafIfIndexThe value of this object is equal to MIB II's ifIndex value
of the ATM interface port.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.1.4 |
mpAtmCCAtmMultiLeafVpiThe VPI value of the Multicast-Leaf-PVC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.1.5 |
mpAtmCCAtmMultiLeafVciThe VCI value of the Multicast-Leaf-PVC.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.1.6 |
mpAtmCCAtmMultiTrafficDescrIndexThe value of this object identifies in the ATM
Traffic Descriptor Table which applies to this
multicast PVC.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.12.1.7 |
mpAtmCCAtmMultiSlotNumberSpecified the slot number which used the Multicast Card.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.1.8 |
mpAtmCCAtmMultiVcRdiResponseSpecified responds to the VC-AIS or not when the VC-RDI
received.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.1.9 |
mpAtmCCAtmMultiPvcIdThe value of this object identifies the desired
this connection.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.1.10 |
mpAtmCCAtmMultiSeqNoOrder information in this connection.rw INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.1.11 |
mpAtmCCAtmMultiCfgStatusThe value of this object identifies configration
status for this table.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.1.98 |
mpAtmCCAtmMultiRegErrInfoThe value of this object indicates error
information that became an error set to MIB
in this table.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.1.99 |
mpAtmCCAtmMulticastCtlTableThis table used when control of the multicast root
or leaf PVC. SEQUENCE OF MpAtmCCAtmMultiCtlEntry .1.3.6.1.4.1.119.2.3.3.13.110.12.2 |
mpAtmCCAtmMultiCtlEntryAn entry in the mpAtmCCAtmMulticastCtlTable. MpAtmCCAtmMultiCtlEntry .1.3.6.1.4.1.119.2.3.3.13.110.12.2.1 |
mpAtmCCAtmMultiIfIndexThe value of this object is equal to MIB II's ifIndex value
of the ATM interface port. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.1 |
mpAtmCCAtmMultiVpiThe VPI value of this PVC. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.2 |
mpAtmCCAtmMultiVciThe VCI value of this PVC. INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.3 |
mpAtmCCAtmMultiAdminStatusThe value of this object identifies the desired
administrative status of this Multicast-PVC.
The up and down states indicate that the traffic
flow is enabled and disabled respectively on this
Multicast-PVC.rw Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.4 |
mpAtmCCAtmMultiOperStatusThe value of this object identifies the desired
operational status of this Multicast-PVC.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.5 |
mpAtmCCAtmMultiErrInfoThe value of this object indicates error
information that became an error set to MIB
in this table.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.99 |
mpAtmCCAtmMulticastConfTableThis table indicate that infom the ATM-Multicast-PVC. SEQUENCE OF MpAtmCCAtmMultiConfEntry .1.3.6.1.4.1.119.2.3.3.13.110.12.3 |
mpAtmCCAtmMultiConfEntryAn entry in the mpAtmCCAtmMulticastConfTable. MpAtmCCAtmMultiConfEntry .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1 |
mpAtmCCAtmMultiConfRootIfIndexThe value of this object is equal to MIB II's ifIndex value
of the ATM interface port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.1 |
mpAtmCCAtmMultiConfRootVpiThe VPI value of the Multicast-Root-PVC.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.2 |
mpAtmCCAtmMultiConfRootVciThe VCI value of the Multicast-Root-PVC.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.3 |
mpAtmCCAtmMultiConfLeafIfIndexThe value of this object is equal to MIB II's ifIndex value
of the ATM interface port.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.4 |
mpAtmCCAtmMultiConfLeafVpiThe VPI value of the Multicast-Leaf-PVC.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.5 |
mpAtmCCAtmMultiConfLeafVciThe VCI value of the Multicast-Leaf-PVC.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.6 |
mpAtmCCAtmMultiConfRootAdminStatusThe value of this object identifies the desired
administrative status of this Multicast-Root-PVC.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.7 |
mpAtmCCAtmMultiConfRootOperStatusThe value of this object identifies the desired
operational status of this Multicast-Root-PVC.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.8 |
mpAtmCCAtmMultiConfLeafAdminStatusThe value of this object identifies the desired
administrative status of this Multicast-Leaf-PVC.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.9 |
mpAtmCCAtmMultiConfLeafOperStatusThe value of this object identifies the desired
operational status of this Multicast-Leaf-PVC.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.10 |
mpAtmCCAtmMultiConfTrafficDescrIndexThe value of this object identifies
in the ATM Traffic Descriptor Table which
applies of this Multicast-PVC.ro AtmTrafficDescrParamIndex .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.11 |
mpAtmCCAtmMultiConfSlotNumberThe value of this object identifies the slot number
which used the Multicast Card.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.12 |
mpAtmCCAtmMultiConfVcRdiResponsehe value of this object identifies that responds to the
VC-AIS or not when the VC-RDI received.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.13 |
mpAtmCCAtmMultiConfPvcIdThe value of this object identifies the desired
this connection.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.14 |
mpAtmCCAtmMultiConfSeqNoOrder information in this connection.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.15 |
mpAtmCCAtmMultiConfShaperRateThe bandwidth value of this Multicast-PVC in cell per
second.ro INTEGER .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.16 |
mpAtmCCAtmMultiConfRootVpTunnelingThe value of this object identifies the port (at the
Multicast-Root-PVC) VP-Tunneling indication.
1:VP-Tunneling
2:Not VP-Tunnelingro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.17 |
mpAtmCCAtmMultiConfLeafVpTunnelingThe value of this object identifies the port (at the
Multicast-Leaf-PVC) VP-Tunneling indication.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.18 |
mpAtmCCAtmMultiConfNextLeafThe value of this object identifies the
last segment.ro Enumeration .1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.19 |
mpCes OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.111 |
mpIpsw OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.112 |
mpInsCtl OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.113 |
mpFfr OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.3.13.114 |