MITEL-PPPGROUP-MIB
The MITEL PPP MIB module.
Main OID:
mitelRouterPppGroup.1.3.6.1.4.1.1027.4.8.1.2
30
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
30 total| Object Name |
|---|
mitel OBJECT IDENTIFIER .1.3.6.1.4.1.1027 |
mitelProprietary OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4 |
mitelPropIpNetworking OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8 |
mitelIpNetRouter OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1 |
mitelRouterPppGroupThe MITEL PPP MIB module. MODULE-IDENTITY .1.3.6.1.4.1.1027.4.8.1.2 |
mitelPppGrpGlobalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1.2.1 |
mitelGblGrpNegotiateFirstThis attribute defines which PPP authentication protocol is negotiated first on incoming call. DEFAULT = chaprw Enumeration .1.3.6.1.4.1.1027.4.8.1.2.1.1 |
mitelGblGrpDynamicIpAddrThis attribute defines the start address of the dynamic addres pool.rw IpAddress .1.3.6.1.4.1.1027.4.8.1.2.1.2 |
mitelGblGrpNumDynamicIpAddrThis attribute defines the number of dynamic IP addresses in the pool.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.2.1.3 |
mitelGblGrpDynamicIpAdrrHoldoffThis attribute defines the time in seconds before the same IP address can be reused after a call has been disconnected.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.2.1.4 |
mitelGblGrpRemDnsIpAddrHandlingThis attribute determines wether the system can accept or override the DNS IP address submitted by a remote system. DEFAULT = accept. Override has been superceded by overridewith.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.2.1.5 |
mitelGblGrpPrimaryWinsServerIpAddrThis attribute defines the Primary WINS server IP address of your Network.rw IpAddress .1.3.6.1.4.1.1027.4.8.1.2.1.6 |
mitelGblGrpSecondaryWinsServerIpAddrThis attribute defines the Secondary WINS server IP address of your Network.rw IpAddress .1.3.6.1.4.1.1027.4.8.1.2.1.7 |
mitelPppGrpRemoteConfigTableThis table contains objects that pertain to the management of remote LANs that use the PPP Internet standard link protocol. SEQUENCE OF MitelPppGrpRemoteConfigEntry .1.3.6.1.4.1.1027.4.8.1.2.2 |
mitelPppGrpRemoteConfigEntryA default entry at conceptual row zero does exist in this table. The default entry can be used to specify the PPP authentication protocol only. MitelPppGrpRemoteConfigEntry .1.3.6.1.4.1.1027.4.8.1.2.2.1 |
mitelRmtCfgTableIndexThis object uniquely identifies this objectro Integer32 .1.3.6.1.4.1.1027.4.8.1.2.2.1.1 |
mitelRmtCfgTableIpAddrHandlingThis attribute determines wether the system can accept or override the DNS IP address submitted by a remote system. DEFAULT = accept.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.2.2.1.2 |
mitelRmtCfgTableRemIpAddrThe IP address to assign to remote if mitelRmtCfgTableIPAddrHandling is set to assign(3)rw IpAddress .1.3.6.1.4.1.1027.4.8.1.2.2.1.3 |
mitelRmtCfgTableStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.2.2.1.4 |
mitelRmtCfgTablePppModeThe mode PPP will be using for the given destination.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.2.2.1.5 |
mitelPppGrpPppOverEthernetTableTable containing the configuration items needed by the PPPoE stack. SEQUENCE OF MitelPppGrpPppOverEthernetEntry .1.3.6.1.4.1.1027.4.8.1.2.3 |
mitelPppGrpPppOverEthernetEntryPPPoE information MitelPppGrpPppOverEthernetEntry .1.3.6.1.4.1.1027.4.8.1.2.3.1 |
mitelPppOEthTableIndexUnique Identifier for an entry in PPP over Ethernet Table.rw Integer32 .1.3.6.1.4.1.1027.4.8.1.2.3.1.1 |
mitelPppOEthTableEnabledIs this PPPoE instance enabled or not.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.2.3.1.2 |
mitelPppOEthTablePacketTimeoutThe time to wait, in seconds, for a valid response to a discovery packet before resending it. Warning: this value is doubled ever time a packet is resent.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.2.3.1.3 |
mitelPppOEthTablePacketRetriesThe number of times to resend discovery packets before giving up on the negotiation.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.2.3.1.4 |
mitelPppOEthTableTotalRetriesThe RFC states that failure to receive a valid PADS packet should restart the negotiation. This count stops the system retrying indefinitely on duff PADS packets by capping the total number of retry attempts.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.2.3.1.5 |
mitelPppOEthTableServiceNameThe service we wish to request from the remote access concentrator. Examples of the use of the service name are to indicate an ISP or a class or quality of service. An empty string indicates any service.rw OCTET STRING .1.3.6.1.4.1.1027.4.8.1.2.3.1.6 |
mitelPppOEthTableACNameDescription of the remote access concentrator we wish to connect to. An empty string indicates no preference.rw OCTET STRING .1.3.6.1.4.1.1027.4.8.1.2.3.1.7 |
mitelPppOEthTableStatusThe entry's row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.2.3.1.8 |