MITEL-IPFILTER-MIB
The MITEL IP MIB module.
Main OID:
mitelIpGrpFilterGroup.1.3.6.1.4.1.1027.4.8.1.1.1
45
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
45 total| Object Name |
|---|
mitel OBJECT IDENTIFIER .1.3.6.1.4.1.1027 |
mitelIdentification OBJECT IDENTIFIER .1.3.6.1.4.1.1027.1 |
mitelIdCallServers OBJECT IDENTIFIER .1.3.6.1.4.1.1027.1.2 |
mitelIdCsIpera1000 OBJECT IDENTIFIER .1.3.6.1.4.1.1027.1.2.4 |
mitelAccResTableTrappedThe mitelAccResTableTrapped trap indicates that a datagram has
matched a mitelFltGrpAccessRestrictEntry that has the
mitelAccResTableTrap enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.1027.1.2.4.0.402 |
mitelProprietary OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4 |
mitelPropIpNetworking OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8 |
mitelIpNetRouter OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1 |
mitelRouterIpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1.1 |
mitelIpGrpFilterGroupThe MITEL IP MIB module. MODULE-IDENTITY .1.3.6.1.4.1.1027.4.8.1.1.1 |
mitelFltGrpAccessRestrictEnableThis object indicates if the IP Access
Restriction table is being used to filter
or forward packets.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.1 |
mitelFltGrpLogicalTableA table containing information about logical IP LAN
destinations. SEQUENCE OF MitelIpGrpLogicalEntry .1.3.6.1.4.1.1027.4.8.1.1.1.2 |
mitelFltGrpLogicalEntryEach entry of this table contains information about
a specific logical interface toa local area network.
Each logical LAN can support routing or bridging
functions, these are considered virtual interfaces. MitelIpGrpLogicalEntry .1.3.6.1.4.1.1027.4.8.1.1.1.2.1 |
mitelLogTableAccessDefThis object indicates what default access rights
will apply to IP packets that do not match any of the
access restrictions.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.2.1.1 |
mitelLogTableAllowSrcRoutingThis indicates whether IP datagrams received on this
interface and containing a source route option are to
be discarded or accepted.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.2.1.2 |
mitelFltGrpAccessRestrictTableThe IP Access REstriction configuration table. SEQUENCE OF MitelFltGrpAccessRestrictEntry .1.3.6.1.4.1.1027.4.8.1.1.1.3 |
mitelFltGrpAccessRestrictEntryContains information about a single IP Access
filter. MitelFltGrpAccessRestrictEntry .1.3.6.1.4.1.1027.4.8.1.1.1.3.1 |
mitelAccResTableIfIndexIdentifies the destination interface to which this
filter apply.ro Integer32 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.1 |
mitelAccResTableOrderSpecifies the order that the filters on a destination
are searched.ro Integer32 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.2 |
mitelAccResTableTypeThis object indicates what action should be taken
when a match on this entry has occurred.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.3 |
mitelAccResTableSrcAddrFromDefines the lower bound of the source IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.0.1.rw IpAddress .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.4 |
mitelAccResTableSrcAddrToDefines the upper bound of the source IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.0.1.rw IpAddress .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.5 |
mitelAccResTableSrcAddrOutsideRangeThis indicates whether action is taken on values outside of
the source IP address range or within that range.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.6 |
mitelAccResTableDstAddrFromDefines the lower bound of the destination IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.0.1.rw IpAddress .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.7 |
mitelAccResTableDstAddrToDefines the upper bound of the destination IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.0.1.rw IpAddress .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.8 |
mitelAccResTableDstAddrOutsideRangeThis indicates whether action is taken on values outside of
the destination IP address range or within that range.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.9 |
mitelAccResTableProtocolFromDefines the lower bound of the protocol ID range. When
determining protocol ID ranges, these four values are
sequential: 254, 255, 0, and 1.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.10 |
mitelAccResTableProtocolToDefines the upper bound of the protocol ID range. When
determining protocol ID ranges, these four values are
sequential: 254, 255, 0, and 1.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.11 |
mitelAccResTableProtocolOutsideRangeThis indicates whether action is taken on values outside of
the protocol ID range or within that range.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.12 |
mitelAccResTableSrcPortFromDefines the lower bound of the source port number range. When
determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.13 |
mitelAccResTableSrcPortToDefines the upper bound of the source port number range. When
determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.14 |
mitelAccResTableSrcPortOutsideRangeThis indicates whether action is taken on values outside of
the source port number range or within that range.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.15 |
mitelAccResTableDstPortFromDefines the lower bound of the destination port number range.
When determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.16 |
mitelAccResTableDstPortToDefines the upper bound of the destination port number range.
When determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.17 |
mitelAccResTableDstPortOutsideRangeThis indicates whether action is taken on values outside of
the destination port number range or within that range.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.18 |
mitelAccResTableTcpSynTCP header, synchronize sequence numbers flag.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.19 |
mitelAccResTableTcpAckTCP header, acknowledgment flag.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.20 |
mitelAccResTableTcpFinTCP header, finish flag.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.21 |
mitelAccResTableTcpRstTCP header, reset flag.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.22 |
mitelAccResTableMatchInIndicates whether the filter applies to datagrams received
on the interface. Normally, either mitelAccResTableMatchIn or
mitelAccResTableMatchOut should be enabled.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.23 |
mitelAccResTableMatchOutIndicates whether the filter applies to datagrams
transmitted on the interface. Normally, either
mitelAccResTableMatchIn or mitelAccResTableMatchOut should be enabled.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.24 |
mitelAccResTableLogControls whether a log message is to be produced each time
a datagram matches the filter.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.25 |
mitelAccResTableTrapControls the generation of SNMP trap.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.26 |
mitelAccResTableStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.27 |
mitelAccResTableCountRecords the number of datagrams that matched this
instance.ro Integer32 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.28 |