MITEL-DHCP-MIB
The MITEL DHCP MIB module.
Main OID:
mitelRouterDhcpGroup.1.3.6.1.4.1.1027.4.8.1.3
110
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
110 total| Object Name |
|---|
mitel OBJECT IDENTIFIER .1.3.6.1.4.1.1027 |
mitelIdentification OBJECT IDENTIFIER .1.3.6.1.4.1.1027.1 |
mitelIdCallServers OBJECT IDENTIFIER .1.3.6.1.4.1.1027.1.2 |
mitelIdCsIpera1000 OBJECT IDENTIFIER .1.3.6.1.4.1.1027.1.2.4 |
mitelIpera1000NotificationsCall Server Ipera 1000 Notifications. Unknown .1.3.6.1.4.1.1027.1.2.4.0 |
mitelDhcpClientObtainedIpThe mitelDhcpClientObtainedIP trap indicates that the router has obtained a lease for an IP address from a DHCP server. NOTIFICATION-TYPE .1.3.6.1.4.1.1027.1.2.4.0.404 |
mitelDhcpClientLeaseExpiryThe mitelDhcpClientLeaseExpiry trap indicates that the router's DHCP client lease has expired. NOTIFICATION-TYPE .1.3.6.1.4.1.1027.1.2.4.0.405 |
mitelProprietary OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4 |
mitelPropIpNetworking OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8 |
mitelIpNetRouter OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1 |
mitelRouterDhcpGroupThe MITEL DHCP MIB module. MODULE-IDENTITY .1.3.6.1.4.1.1027.4.8.1.3 |
mitelDhcpRelayAgentEnableConfigures the router to enable the DHCP/BOOTP relay agent. The default is disabled.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.1 |
mitelDhcpRelayAgentMaxHopsThis object determines the maximum allowed value the hops field of the received DHCP/BOOTP packet can have. Packets with higher values will be rejected.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.3.2 |
mitelDhcpRelayAgentServerTableThis table is used to display and configure the list of servers to which the relay agent will relay DHCP/BOOTP REQUEST packets. SEQUENCE OF MitelDhcpRelayAgentServerEntry .1.3.6.1.4.1.1027.4.8.1.3.3 |
mitelDhcpRelayAgentServerEntryEach entry in this table contains information on a DHCP/BOOTP server. MitelDhcpRelayAgentServerEntry .1.3.6.1.4.1.1027.4.8.1.3.3.1 |
mitelDhcpRelayAgentServerAddrThe IP address of the DHCP/BOOTP server.rw IpAddress .1.3.6.1.4.1.1027.4.8.1.3.3.1.1 |
mitelDhcpRelayAgentServerNameThis object indicates the associated name of the DHCP/BOOTP server. It's main purpose is to be used as a reference name.rw DisplayString .1.3.6.1.4.1.1027.4.8.1.3.3.1.2 |
mitelDhcpRelayAgentServerStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.3.3.1.3 |
mitelDhcpRelayAgentBroadcastDetermines wether or not the DHCP Relay Agent should retransmit received BOOTP requests using local broadcast on each IP interface. The default is disabled.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.4 |
mitelDhcpServerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1.3.5 |
mitelDhcpServerGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1.3.5.1 |
mitelDhcpServerGeneralEnableConfigures the router to enable the DHCP/BOOTP server The default is disabled.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.1.1 |
mitelDhcpServerGeneralGatewayDetermines wether or not the local IP address associated with the interface on which the DHCP request was received should be advertised as a default gateway, and if yes with which priority.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.1.2 |
mitelDhcpServerGeneralRefDhcpServerIndicates if unknown requested options values should be obtained from another DHCP server (if possible). Adequate values are: - a specific IP address of a known DHCP server - a IP address specifiying the interface on which the DHCP server should be found (using broadcast). i.e. 0.0.0.x where x is the interface logical ID. - 255.255.255.255: broadcast on all interfaces. - 0.0.0.0: the feature is disabled.rw IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.1.3 |
mitelDhcpServerGeneralPingStatusEnable/disable PING server functionality when passing out leases.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.1.4 |
mitelDhcpServerSubnetTableThis table is used to configure the group of IP addresses that can be handed out by the DHCP server. SEQUENCE OF MitelServerSubnetEntry .1.3.6.1.4.1.1027.4.8.1.3.5.2 |
mitelDhcpServerSubnetEntryEach entry in this table contains information on a subnet serverd by the DHCP server. MitelServerSubnetEntry .1.3.6.1.4.1.1027.4.8.1.3.5.2.1 |
mitelDhcpServerSubnetAddrThe IP address of the subnet (key).ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.2.1.1 |
mitelDhcpServerSubnetSharedNetThe IP address of another subnet that is on the same shared media as this subnet. The address of the shared subnet MUST also be configured on this server. The address 0.0.0.0 should be used if this subnet is not shared. (key)ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.2.1.2 |
mitelDhcpServerSubnetMaskThe subnet mask of the subnet.rw IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.2.1.3 |
mitelDhcpServerSubnetGatewayIndicate whether or not the IP address configured on the interface which received the DHCP request should be advertised as a default gateway. If yes, this also indicate the relative priority compared to additional gateways that might be configured (DHCP option 3).rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.2.1.4 |
mitelDhcpServerSubnetNameThe name of the configured subnet (informational only).rw DisplayString .1.3.6.1.4.1.1027.4.8.1.3.5.2.1.5 |
mitelDhcpServerSubnetDeleteTreeIf this flag is set to enable, when the object is deleted, all the DHCP server configuration objects that depend on it will be deleted at the same time.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.2.1.6 |
mitelDhcpServerSubnetStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.3.5.2.1.7 |
mitelDhcpServerRangeTableA list of ranges that are configured on this server. SEQUENCE OF MitelDhcpServerRangeEntry .1.3.6.1.4.1.1027.4.8.1.3.5.3 |
mitelDhcpServerRangeEntryA logical row in the mitelServerGrpRangeTblTable. MitelDhcpServerRangeEntry .1.3.6.1.4.1.1027.4.8.1.3.5.3.1 |
mitelDhcpServerRangeStartThe IP address of the first address in the range (key).ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.3.1.1 |
mitelDhcpServerRangeEndThe IP address of the last address in the range.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.3.1.2 |
mitelDhcpServerRangeSubnetThe IP address of the subnet which includes this range. This IP address is used to find the corresponding mitelDhcpServerSubnetEntryro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.3.1.3 |
mitelDhcpServerRangeProtocolHow the addresses in that group should be assigned. none = the address are reserved by the administrator (do we need this ?).rw MitelDhcpServerProtocol .1.3.6.1.4.1.1027.4.8.1.3.5.3.1.4 |
mitelDhcpServerRangeGatewayIndicate whether or not the IP address configured on the interface which received the DHCP request should be advertised as a default gateway. If yes, this also indicate the relative priority compared to additional gateways that might be configured (DHCP option 3).rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.3.1.5 |
mitelDhcpServerRangeLeaseTimeThe duration of the lease of IP addressed in this range in seconds. A value of 4294967295 (0xFFFFFFFF) means that the lease is permanent. A value of 0 (0x00000000) means that the address in that range can not be assigned.rw Integer32 .1.3.6.1.4.1.1027.4.8.1.3.5.3.1.6 |
mitelDhcpServerRangeNameThe name of the configured range (informational only).rw DisplayString .1.3.6.1.4.1.1027.4.8.1.3.5.3.1.7 |
mitelDhcpServerRangeMatchClassIdIf this flag is set to enable, IP addresses in this range will only be assigned to clients indicating a class ID identical to the range name.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.3.1.8 |
mitelDhcpServerRangeDeleteTreeIf this flag is set to enable, when the object is deleted, all the DHCP server configuration objects that depend on it will be deleted at the same time.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.3.1.9 |
mitelDhcpServerRangeStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.3.5.3.1.10 |
mitelDhcpServerStaticIpTableA list of the addresses that are statically configured. SEQUENCE OF MitelDhcpServerStaticIpEntry .1.3.6.1.4.1.1027.4.8.1.3.5.4 |
mitelDhcpServerStaticIpEntryA logical row in the mitelDhcpServerStaticIpTable. MitelDhcpServerStaticIpEntry .1.3.6.1.4.1.1027.4.8.1.3.5.4.1 |
mitelDhcpServerStaticIpAddrThe IP address of the entry (key). This IP address has to be unique across the DHCP server configuration. It can not be duplicated in another mitelDhcpServerStaticIpEntry and it can not be part of a mitelDhcpServerRangeEntry.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.4.1.1 |
mitelDhcpServerStaticIpSubnetThe IP address of the subnet which includes this IP address. This IP address is used to find the corresponding mitelDhcpServerSubnetEntryro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.4.1.2 |
mitelDhcpServerStaticIpProtocolHow the addresses in that group should be assigned. none = the address are reserved by the administrator (do we need this ?).rw MitelDhcpServerProtocol .1.3.6.1.4.1.1027.4.8.1.3.5.4.1.3 |
mitelDhcpServerStaticIpGatewayIndicate whether or not the IP address configured on the interface which received the DHCP request should be advertised as a default gateway. If yes, this also indicate the relative priority compared to additional gateways that might be configured (DHCP option 3).rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.4.1.4 |
mitelDhcpServerStaticIpMacAddressThe hardware type and hardware address of the client that has been assigned this IP address. The first octet of this object contains the hardware type from the 'htype' field of the BOOTP packet and the remaining octets contain the hardware address from the 'chaddr' field of the BOOTP packet. Either the mitelDhcpServerStaticIpClientId or the mitelDhcpServerStaticIpMacAddress field has to have a valid value. If none of them are configured, then the IP address is just not assignable by this server.rw OCTET STRING .1.3.6.1.4.1.1027.4.8.1.3.5.4.1.5 |
mitelDhcpServerStaticIpClientIdThe client-id of the client that has been assigned this lease. The client-id is the value specified in option 61 (client-id option) when the lease was assigned. This object may be empty if the lease has not been previously assigned or if the client- id option was not specified when the lease was assigned. Either the mitelDhcpServerStaticIpClientId or the mitelDhcpServerStaticIpMacAddress field has to have a valid value. If none of them are configured, then the IP address is just not assignable by this server.rw OCTET STRING .1.3.6.1.4.1.1027.4.8.1.3.5.4.1.6 |
mitelDhcpServerStaticIpNameThe name of the configured range (informational only).rw DisplayString .1.3.6.1.4.1.1027.4.8.1.3.5.4.1.7 |
mitelDhcpServerStaticIpDeleteTreeIf this flag is set to enable, when the object is deleted, all the DHCP server configuration objects that depend on it will be deleted at the same time.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.4.1.8 |
mitelDhcpServerStaticIpStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.3.5.4.1.9 |
mitelDhcpServerOptionTableThis table contain list of options that will be sent to clients requesting IP addresses. SEQUENCE OF MitelDhcpServerOptionEntry .1.3.6.1.4.1.1027.4.8.1.3.5.5 |
mitelDhcpServerOptionEntryEach entry in this list contains information about a specific DHCP option. MitelDhcpServerOptionEntry .1.3.6.1.4.1.1027.4.8.1.3.5.5.1 |
mitelDhcpServerOptionAddrThis IP address keys in either the mitelDhcpServerRangeTable or the mitelDhcpServerStaticIpTable or the mitelDhcpServerSubnetTable. It indicates the realm in which that particular option/value pair is to be handed out. If the IP address key is 0.0.0.0 this means that the option is valid for any of the range/static IP configured. In the case where the same option number is configured for different realms, the selection will go from the most specific to the most generic according to the following scheme: 1. mitelDhcpGrpStaticIpTable or mitelDhcpServerRangeTable 2. mitelDhcpServerSubnetTable 3. global definition (i.e. mitelDhcpGrpOptionIp = 0.0.0.0)ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.5.1.1 |
mitelDhcpServerOptionNumberThis is the option number as specified in RFC 2132: 'DHCP Options and BOOTP Vendor Extensions'. Some of the options are not configurable that way (like subnet mask). The options that are not configurable are the ones that can be derived from the general configuration (from either the mitelDhcpServerSubnetTableor mitelDhcpServerRangeTable or mitelDhcpServerStaticIpTable) or that have a meaning only from the client to the server (such as the client ID (option 61)). Range: 1..254ro MitelDhcpServerOptionList .1.3.6.1.4.1.1027.4.8.1.3.5.5.1.2 |
mitelDhcpServerOptionDisplayFormatThis indicates how the value should be formated. This is informational only and may be ignored. If something else than default is specified, the system will attempt to display the value field according to the setting. Otherwise, it will try to establish the correct way to display it based on the option number.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.5.1.3 |
mitelDhcpServerOptionValueThis contains the value of the option encoded as it will be sent in the DHCP packets.rw OCTET STRING .1.3.6.1.4.1.1027.4.8.1.3.5.5.1.4 |
mitelDhcpServerOptionStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.3.5.5.1.5 |
mitelDhcpServerLeaseTableThis table contain a list of all the assigned leases and their current status. SEQUENCE OF MitelDhcpServerLeaseEntry .1.3.6.1.4.1.1027.4.8.1.3.5.6 |
mitelDhcpServerLeaseEntryEach entry in this list contains information about a specific lease. MitelDhcpServerLeaseEntry .1.3.6.1.4.1.1027.4.8.1.3.5.6.1 |
mitelDhcpServerLeaseAddrThe IP address described in that lease.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.1 |
mitelDhcpServerLeaseSubnetThe IP address indicating the subnet to which the IP address belongs. That IP address can be used as a key in the mitelDhcpServerSubnetTable.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.2 |
mitelDhcpServerLeaseRangeA reference the the IP address Range from which this IP address has been assigned. This IP address can be used as a key for the mitelDhcpServerRangeTable.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.3 |
mitelDhcpServerLeaseTypeThe type of this address.ro Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.4 |
mitelDhcpServerLeaseEndTimeThe value that sysUpTime will be when the lease expires. A value of 4294967295 (i.e.: 0xFFFFFFFF) should be used for leases that have a lease time which is 'infinite' and for BOOTP leases.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.5 |
mitelDhcpServerLeaseAllowedProtocolThe type of protocol that is allowed to be used to serve this address. A type of none(1) indicates that the address is not available to be served (e.g.: a reserved address).ro Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.6 |
mitelDhcpServerLeaseServedProtocolThe type of protocol that was used when this address was assigned. This object will have the value of none(1) if the lease has not been served.ro Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.7 |
mitelDhcpServerLeaseMacAddressThe hardware type and hardware address of the client that has been assigned this lease. The first octet of this object contains the hardware type from the 'htype' field of the BOOTP packet and the remaining octets contain the hardware address from the 'chaddr' field of the BOOTP packet. This object may be empty if the lease has not been previously served.ro OCTET STRING .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.8 |
mitelDhcpServerLeaseClientIdThe client-id of the client that has been assigned this lease. The client-id is the value specified in option 61 (client-id option) when the lease was assigned. This object may be empty if the lease has not been previously assigned or if the client- id option was not specified when the lease was assigned.ro OCTET STRING .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.9 |
mitelDhcpServerLeaseHostNameThe host name the client is configured with or if no host name was configured then the host name that the client supplied when requesting an address.ro DisplayString .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.10 |
mitelDhcpServerLeaseDomainNameThe domain name assigned to the client.ro DisplayString .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.11 |
mitelDhcpServerLeaseServedTimeThe system time at which this entry was created.ro INTEGER .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.12 |
mitelDhcpServerLeaseStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.3.5.6.1.13 |
mitelDhcpServerStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1.3.5.7 |
mitelDhcpServerStatsNumServersThis indicates the number of configured DHCP servers which are used for the DHCP Relay Agent.ro INTEGER .1.3.6.1.4.1.1027.4.8.1.3.5.7.1 |
mitelDhcpServerStatsConfSubnetsThis indicates the number of configured DHCP subnets.ro INTEGER .1.3.6.1.4.1.1027.4.8.1.3.5.7.2 |
mitelDhcpServerStatsConfRangesThis indicates the number of configured DHCP ranges.ro INTEGER .1.3.6.1.4.1.1027.4.8.1.3.5.7.3 |
mitelDhcpServerStatsConfStaticThis indicates the number of configured static IP addresses.ro INTEGER .1.3.6.1.4.1.1027.4.8.1.3.5.7.4 |
mitelDhcpServerStatsConfOptionsThis indicates the number of configured DHCP Options.ro INTEGER .1.3.6.1.4.1.1027.4.8.1.3.5.7.5 |
mitelDhcpServerStatsConfLeasesThis indicates the number of served leases.ro INTEGER .1.3.6.1.4.1.1027.4.8.1.3.5.7.6 |
mitelDhcpServerVendorInfoTableThis table contain list of vendor-specific-options that will be sent to clients when requesting an IP addresses. SEQUENCE OF MitelDhcpServerVendorInfoEntry .1.3.6.1.4.1.1027.4.8.1.3.5.8 |
mitelDhcpServerVendorInfoEntryEach entry in this list contains information about a vendor specific DHCP option. MitelDhcpServerVendorInfoEntry .1.3.6.1.4.1.1027.4.8.1.3.5.8.1 |
mitelDhcpServerVendorInfoIDThe unique vendor Identifier. May or not make sense to someone viewing the data.ro DisplayString .1.3.6.1.4.1.1027.4.8.1.3.5.8.1.1 |
mitelDhcpServerVendorInfoNameThe unique name of the vendor. The suggestion is that this value be recognizable to someone viewing the data.ro DisplayString .1.3.6.1.4.1.1027.4.8.1.3.5.8.1.2 |
mitelDhcpServerVendorInfoOptionDisplayFormatThis indicates how the value should be formated. This is informational only and may be ignored. If something else than default is specified, the system will attempt to display the value field according to the setting. Otherwise, it will try to establish the correct way to display it based on the option number.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.3.5.8.1.3 |
mitelDhcpServerVendorInfoOptionValueThe options that the vendor, the vendor specified in VendorInfoID, would want to send to it's clients. All content of this object would only make sense to the receiving client, no syntax or sematics of the content is specifed by this definition, that information would be specified by the vendor.rw OCTET STRING .1.3.6.1.4.1.1027.4.8.1.3.5.8.1.4 |
mitelDhcpServerVendorInfoStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.3.5.8.1.5 |
mitelDhcpClientTableThis table contains a list of all DHCP Clients. SEQUENCE OF MitelDhcpClientEntry .1.3.6.1.4.1.1027.4.8.1.3.6 |
mitelDhcpClientEntryEach entry in this list contains information for a DHCP client. MitelDhcpClientEntry .1.3.6.1.4.1.1027.4.8.1.3.6.1 |
mitelDhcpClientIndexThe Index of this Client. This object's value has a direct correlation to the interface on which DHCP client has been defined.ro INTEGER .1.3.6.1.4.1.1027.4.8.1.3.6.1.1 |
mitelDhcpClientIdThe ID of this clientrw OCTET STRING .1.3.6.1.4.1.1027.4.8.1.3.6.1.2 |
mitelDhcpClientLeaseActionThe object allows the user to release the current IP address assigned to this DHCP client. The user can also conduct a renew action to obtain an IP address for this client. By default this object will return none(1).ro Enumeration .1.3.6.1.4.1.1027.4.8.1.3.6.1.3 |
mitelDhcpClientIpAddressThe IP of this client assigned by the DHCP server.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.6.1.4 |
mitelDhcpClientLeaseObtainedThe time the lease was acquiredro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1027.4.8.1.3.6.1.5 |
mitelDhcpClientLeaseExpiredThe time the current lease expires.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1027.4.8.1.3.6.1.6 |
mitelDhcpClientDefaultGatewayThe default gateway IP for this client learned from the DHCP server.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.6.1.7 |
mitelDhcpClientServerIpThe IP of this client's DHCP server.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.6.1.8 |
mitelDhcpClientPrimaryDnsThe primary DNS IP address of the client learned from the DHCP server.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.6.1.9 |
mitelDhcpClientSecondaryDnsThe secondary DNS IP address of the client learned from the DHCP server.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.6.1.10 |
mitelDhcpClientPrimaryWinsThe primary WINS IP address of the client learned from the DHCP server.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.6.1.11 |
mitelDhcpClientSecondaryWinsThe secondary WINS IP address of the client learned from the DHCP server.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.3.6.1.12 |
mitelDhcpClientDomainNameThe domain name of this client learned from the DHCP server.ro OCTET STRING .1.3.6.1.4.1.1027.4.8.1.3.6.1.13 |
mitelDhcpClientNameThe name of this client.ro OCTET STRING .1.3.6.1.4.1.1027.4.8.1.3.6.1.14 |
mitelDhcpClientAdminStateThe admin status of this client.ro Enumeration .1.3.6.1.4.1.1027.4.8.1.3.6.1.15 |