MITEL-NAT-MIB
The MITEL-NAT-MIB module enables SNMP-based monitoring and management of Mitel Network Address Translation (NAT) appliances, specifically tracking active session counts, translation table entries, and protocol-specific mapping states for SIP, H.323, and generic TCP/UDP traffic.
Imported Objects
Objects
25 total| Object Name |
|---|
mitel OBJECT IDENTIFIER .1.3.6.1.4.1.1027 |
mitelProprietary OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4 |
mitelPropIpNetworking OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8 |
mitelIpNetRouter OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1 |
mitelRouterIpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1.1 |
mitelIpGrpNatGroupThe MITEL IP MIB module. MODULE-IDENTITY .1.3.6.1.4.1.1027.4.8.1.1.2 |
mitelNatGrpIfTableThe IP network address translation configuration table. SEQUENCE OF MitelNatGrpIfEntry .1.3.6.1.4.1.1027.4.8.1.1.2.1 |
mitelNatGrpIfEntryContains information about network address translation on a single IP interface. MitelNatGrpIfEntry .1.3.6.1.4.1.1027.4.8.1.1.2.1.1 |
mitelNatGrpIfAddrThe IP address of the interface.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.1 |
mitelNatGrpIfEnableConfigures the router to enable IP NAT on a virtual interface.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.2 |
mitelNatGrpIfUdpLifetimeSpecifies timeout in seconds for a NAT UDP session.rw Integer32 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.3 |
mitelNatGrpIfTcpLifetimeSpecifies timeout in seconds for a NAT TCP session.rw Integer32 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.4 |
mitelNatGrpIfTcpFinLifetimeSpecifies timeout in seconds for a NAT TCP session once a FIN was seen.rw Integer32 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.5 |
mitelNatGrpIfTcpRstLifetimeSpecifies timeout in seconds for a NAT TCP session once a RST was seen.rw Integer32 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.6 |
mitelNatGrpIfPingLifetimeSpecifies timeout in seconds for an ICMP echo.rw Integer32 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.7 |
mitelNatGrpIfStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.8 |
mitelNatGrpIfIndexThe current Interface this entry pertains to.ro Integer32 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.9 |
mitelNatGrpRedirTableThe IP network address translation redirection table. SEQUENCE OF MitelNatGrpRedirEntry .1.3.6.1.4.1.1027.4.8.1.1.2.2 |
mitelNatGrpRedirEntryContains information about network address translation incoming on a single IP interface. MitelNatGrpRedirEntry .1.3.6.1.4.1.1027.4.8.1.1.2.2.1 |
mitelNatGrpRedirOldAddrThe IP address of the interface.ro IpAddress .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.1 |
mitelNatGrpRedirProtoIdentifies the IP protocol to redirect, 6 or 17.ro Integer32 .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.2 |
mitelNatGrpRedirOldPortIdentifies the TCP or UDP port to redirect.ro Integer32 .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.3 |
mitelNatGrpRedirNewAddrThe IP address to which the datagram is to be redirected. Default is 0.0.0.0rw IpAddress .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.4 |
mitelNatGrpRedirNewPortThe TCP or UDP port to which the datagram is to be redirected.rw Integer32 .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.5 |
mitelNatGrpRedirStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.6 |
More MIBs from MITEL
Browse all MITELMIBs →SNMP MIB module
SNMP MIB module
SNMP MIB module
The MITEL-LOGICAL-MIB module enables monitoring and management of logical network entities, such as virtual interfaces, trunk groups, and call processing sessions, within Mitel communication systems. It provides access to operational status, traffic counters, and configuration parameters for these logical constructs to facilitate troubleshooting and capacity planning in VoIP and telephony environments.
SNMP MIB module
Standard SNMP MIB module defining data structures for MITEL-IperaVoiceLAN-MIB.