MITEL-IPLOGICAL-MIB
The MITEL-IPLOGICAL-MIB provides SNMP access to logical interface and session state metrics for Mitel IP telephony and VoIP infrastructure devices, enabling monitoring of call routing tables, trunk availability, and logical port operational status.
Imported Objects
Objects
15 total| Object Name |
|---|
mitel OBJECT IDENTIFIER .1.3.6.1.4.1.1027 |
mitelProprietary OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4 |
mitelPropIpNetworking OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8 |
mitelIpNetRouter OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1 |
mitelRouterIpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.8.1.1 |
mitelIpGrpLogicalGroupThe MITEL IP MIB module. MODULE-IDENTITY .1.3.6.1.4.1.1027.4.8.1.1.5 |
mitelIpLogGrpLogicalTableA table containing information about logical IP LAN
destinations. SEQUENCE OF MitelIpLogGrpLogicalEntry .1.3.6.1.4.1.1027.4.8.1.1.5.1 |
mitelIpLogGrpLogicalEntryEach entry of this table contains information about
a specific logical interface to a local area network.
Each logical LAN can support routing or bridging
functions, these are considered virtual interfaces. MitelIpLogGrpLogicalEntry .1.3.6.1.4.1.1027.4.8.1.1.5.1.1 |
mitelIpLogAdvertisementAddressThe IP destination address to be used for multicast
Router Advertisements sent from the interface. The
only permissible values are the all-systems multicast
address, 224.0.0.1, or the limited-broadcast address,
255.255.255.255. (The all-systems address is preferred
wherever possible, i.e., on any link where all
listening hosts support IP multicast.) Default Value is 224.0.0.1rw IpAddress .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.1 |
mitelIpLogMaxAdvertisementIntervalThe maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.2 |
mitelIpLogMinAdvertisementIntervalThe minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in
seconds. Must be no greater than
grIpLMaxAdvertisementInterval.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.3 |
mitelIpLogAdvertisementLifetimeThe value to be placed in the Lifetime field of Router
Advertisements sent from the interface, in seconds.
Must be no less than grIpLMaxAdvertisementInterval.rw INTEGER .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.4 |
mitelIpLogPerformRouterDiscoveryA flag indicating whether or not the host is to perform
ICMP router discovery on the interface.rw Enumeration .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.5 |
mitelIpLogSolicitationAddressThe IP destination address to be used for sending
Router Solicitations from the interface. The only
permissible values are the all-routers multicast
address, 224.0.0.2, or the limited-broadcast address,
255.255.255.255. (The all-routers address is preferred
wherever possible, i.e., on any link where all
advertising routers support IP multicast.) Default 224.0.0.2rw IpAddress .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.6 |
mitelIpLogStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.7 |
More MIBs from MITEL
Browse all MITELMIBs →SNMP MIB module
SNMP MIB module
SNMP MIB module
The MITEL-LOGICAL-MIB module enables monitoring and management of logical network entities, such as virtual interfaces, trunk groups, and call processing sessions, within Mitel communication systems. It provides access to operational status, traffic counters, and configuration parameters for these logical constructs to facilitate troubleshooting and capacity planning in VoIP and telephony environments.
SNMP MIB module
Standard SNMP MIB module defining data structures for MITEL-IperaVoiceLAN-MIB.